2015 Toyota Corolla Owners Manual

 Multi-information display

Eco Drive Indicator Light During Eco-friendly acceleration operation (Eco driving), Eco Driv- ing Indicator Light will turn on. When the acceleration exceeds Zone of Eco driving, and when the vehicle is stopped, the light turns off.

COROLLA_TMMMS_TMMC_U (OM12F00U)

90

2. Instrument cluster

Eco Drive Indicator Zone Display Suggests Zone of Eco driving with current Eco driving ratio based on acceleration.

Eco driving ratio based on acceleration If the acceleration exceeds Zone of Eco driving, the right side of Eco Driving Indicator Zone Display blinks. Zone of Eco driving

 Drive monitor display

 Multi-information display

Eco Driving Indicator Light customization  Drive monitor display

(P. 80)

 Multi-information display

(P. 86)

■Operation of Eco Driving Indicator

Eco Driving Indicator will not operate in the following conditions: ●The shift lever is in any position other than D. ●Paddle shift switch* is operated. ●Sport mode* is selected. ●The vehicle speed is approximately 80 mph (130 km/h) or higher. *: If equipped

COROLLA_TMMMS_TMMC_U (OM12F00U)

91

Operation of each component

3-1. Key information

Keys .................................... 92

3-2. Opening, closing and

locking the doors Doors .................................. 97
Trunk................................. 106
Smart key system ............. 111

3-3. Adjusting the seats

Front seats ........................ 120
Rear seats......................... 122
Head restraints.................. 124

3-4. Adjusting the steering

wheel and mirrors Steering wheel .................. 127
Inside rear view mirror ...... 129
Outside rear view mirrors............................. 131

3-5. Opening and closing

the windows Power windows ................. 133
Moon roof.......................... 137

COROLLA_TMMMS_TMMC_U (OM12F00U)

92

3-1. Key information

Keys

The keys The following keys are provided with the vehicle.  Vehicles without a smart key system (type A)

Keys Key number plate

 Vehicles without a smart key system (type B)

Keys Operating the wireless remote control function Key number plate

 Vehicles with a smart key system

Electronic keys • Operating the smart key sys-

tem (P. 111)

• Operating

the

remote control function

wireless

Mechanical keys Key number plate

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-1. Key information

93

Wireless remote control (if equipped)  Vehicles without a smart key system

Locks all the doors (P. 97) Unlocks all the doors (P. 97) Pressing the button unlocks the driver’s door. Pressing the but- ton again within 5 seconds unlocks the other doors. Sounds the alarm (P. 94) Opens the trunk (P. 107)

 Vehicles with a smart key system

Locks all the doors (P. 98) Unlocks all the doors (P. 98) Pressing the button unlocks the driver’s door. Pressing the but- ton again within 5 seconds unlocks the other doors. Opens the trunk (P. 107) Sounds the alarm (P. 94)

Using the mechanical key To take out the mechanical key, push the release button and take the key out.

The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re- attempt to insert it. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key bat- tery is depleted or the entry function does not operate properly, you will need the mechanical key. (P. 528)

COROLLA_TMMMS_TMMC_U (OM12F00U)

94

3-1. Key information

■Panic mode (with a wireless remote control function)

 Vehicles without a smart key system When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the wireless remote control.

 Vehicles with a smart key system When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the electronic key.

■If you lose your keys

New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart key system) or mechanical key (vehicles with a smart key system) and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.

■When riding in an aircraft

When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any button on the key while inside the aircraft cabin. If you are carrying the key in your bag etc., ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-1. Key information

95

■Electronic key battery depletion (vehicles with a smart key system)

●The standard battery life is 1 to 2 years. ●If the battery becomes low, an alarm will sound in the cabin when the engine

stops. (P. 497, 508)

●As the electronic key always receives radio waves, the battery will become depleted even if the electronic key is not used. The following symptoms indi- cate that the electronic key battery may be depleted. Replace the battery when necessary. (P. 463) • The smart key system or the wireless remote control does not operate. • The detection area becomes smaller. • The LED indicator on the key surface does not turn on.

●To avoid serious deterioration, do not leave the electronic key within 3 ft. (1

m) of the following electrical appliances that produce a magnetic field: • TVs • Personal computers • Cellular phones, cordless phones and battery chargers • Recharging cellular phones or cordless phones • Table lamps • Induction cookers ■Replacing the battery

P. 463

■Confirmation of the registered key number

The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details.

■If a wrong key is used (vehicles with a smart key system)

The key cylinder rotates freely to isolate inside mechanism.

■Certification for the wireless remote control

FCC ID: HYQ12BEL

 For the U.S.A. FCC ID: HYQ23AAH NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  For Canada NOTE: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

COROLLA_TMMMS_TMMC_U (OM12F00U)

96

3-1. Key information

NOTICE

■To prevent key damage

●Do not drop the keys, subject them to strong shocks or bend them. ●Do not expose the keys to high temperatures for long periods of time. ●Do not get the keys wet or wash them in an ultrasonic washer etc. ●Do not attach metallic or magnetic materials to the keys or place the keys

close to such materials.

●Do not disassemble the keys. ●Do not attach a sticker or anything else to the surface of the electronic key

and key (with a wireless remote control function).

●Vehicles with a smart key system: Do not place the keys near objects that produce magnetic fields, such as TVs, audio systems and induction cook- ers, or medical electrical equipment, such as low-frequency therapy equip- ment.

■Carrying the electronic key on your person (vehicles with a smart key

system) Carry the electronic key 3.9 in. (10 cm) or more away from electric appli- ances that are turned on. Radio waves emitted from electric appliances within 3.9 in. (10 cm) of the electronic key may interfere with the key, caus- ing the key to not function properly.

■In case of a smart key system malfunction or other key-related prob-

lems (vehicles with a smart key system) Take your vehicle with all the electronic keys provided with your vehicle to your Toyota dealer.

■When an electronic key is lost (vehicles with a smart key system)

If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-2. Opening, closing and locking the doors

97

Doors

Unlocking and locking the doors from the outside ◆ Smart key system (if equipped)

Carry the electronic key to enable this function.

Grip the driver’s door handle to unlock the door. Grip the passenger’s door handle to unlock all the doors.* Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.

*: The door unlock settings can be changed. (P. 104)

Touch the lock sensor (the indentation on the upper part of the door handle) to lock all the doors.

◆ Wireless remote control (if equipped)  Vehicles without a smart key system

Locks all the doors Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the but- ton again within 5 seconds unlocks the other doors.

COROLLA_TMMMS_TMMC_U (OM12F00U)

98

3-2. Opening, closing and locking the doors

 Vehicles with a smart key system

Locks all the doors Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the but- ton again within 5 seconds unlocks the other doors.

◆ Key Turning the key operates the doors as follows:  Vehicles without a smart key system

Locks all the doors Unlocks all the doors Driver’s side only: Turning the key unlocks the driver's door. Turning the key again unlocks the other doors.

 Vehicles with a smart key system The doors can also be locked and unlocked with the mechanical key. (P. 528)

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

99

■Operation signals

A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice)

■Security feature

If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.

■When the door cannot be locked by the lock sensor on the upper part of

the door handle If the door will not lock even when the top- side sensor area is touched, try using your palm to touch the lock sensor.

■Door lock buzzer

If an attempt to lock the doors using the wireless remote control or smart key system is made when a door is not fully closed, a buzzer will sound for 5 sec- onds. Fully close the door, and lock the vehicle again.

■Setting the alarm (if equipped)

Locking the doors will set the alarm system. (P. 68)

■If the smart key system or the wireless remote control does not operate

properly Use the mechanical key to lock and unlock the doors. (P. 528) Replace the battery with a new one if it is depleted. (P. 463)

COROLLA_TMMMS_TMMC_U (OM12F00U)

100

3-2. Opening, closing and locking the doors

Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors

◆ Inside lock buttons

Locks the door Unlocks the door The front doors can be opened by pulling inside handle even if the lock buttons are in the lock position.

the

Locking the doors from the outside without a key

Move the inside lock button to the lock position. Close the door.

 Vehicles without a smart key system

The door cannot be locked if either of the front doors is open and the key is in the engine switch.

 Vehicles with a smart key system

The door cannot be locked if the engine switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehi- cle. However, the key may not be detected correctly and the door may be locked.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

101

Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set.

Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.

COROLLA_TMMMS_TMMC_U (OM12F00U)

102

3-2. Opening, closing and locking the doors

Automatic door locking and unlocking systems The following functions can be set or cancelled:

Function

Operation

Shift position linked door locking function*1
Shift position linked door unlocking function*1

Speed linked door locking function*2

Driver’s door linked door unlocking function

Shifting the shift lever out of P locks all doors. Shifting the shift lever to P unlocks all doors. All doors are locked when the vehi- cle speed is approximately 12 mph (20 km/h) or higher.  Vehicles without a smart key sys-

tem

All doors are unlocked when the driver's door is opened within approximately 45 seconds of turning the engine switch to “ACC” or “LOCK”.  Vehicles with a smart key system All doors are unlocked when the driver's door is opened within approximately 45 seconds of turning the engine switch to ACCESSORY mode or OFF.

*1: Vehicles with an automatic transmission or continuously variable trans-

mission

*2: Vehicles with a smart key system

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

103

■ Setting and canceling the functions

To switch between set and canceled, follow the procedure below:

Vehicles without a smart key system: Close all the doors and switch the engine switch to the “ON” position. (Perform step within 20 seconds.) Vehicles with a smart key system: Close all the doors and switch the engine switch to IGNITION ON mode. (Perform step within 20 seconds.) Shift the shift lever to P or N, and press and hold the lock switch driver's door or for approximately 5 seconds and then release. The shift lever and switch posi- tions corresponding the desired function to be set are shown as follows. Use the same procedure to cancel the function.

to

Function

Shift lever position

Driver’s door lock switch position

linked door

Shift position linked door lock- ing function*1
Shift position unlocking function*1
Speed linked door locking func- tion*2
Driver's door unlocking function *1: Vehicles with an automatic transmission or continuously variable trans-

linked door

mission

*2: Vehicles with a smart key system When the setting or canceling operation is complete, all doors are locked and then unlocked.

COROLLA_TMMMS_TMMC_U (OM12F00U)

104

3-2. Opening, closing and locking the doors

■Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control.

Turn the engine switch off. When the indicator light on the key surface is not on, press and hold

for approximately 5 seconds while pressing and holding

or

The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step

.)

Multi-information

display

(if equipped)

Unlocking function

Beep

the driver’s door the

Holding handle unlocks only driver’s door. Holding the front passen- ger’s door handle unlocks all the doors. Holding either handle unlocks all doors.

front door the

Exterior: Beeps 3
times Interior: Pings once

Beeps

Exterior: twice Interior: Pings once

Vehicles with an alarm: To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once after the settings have been changed. (If a door is not opened within 60 sec- onds after is pressed, the doors will be locked again and the alarm will automatically be set.) In case that the alarm is triggered, immediately stop the alarm. (P. 68)

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

105

■Conditions affecting the operation of the smart key system or wireless

remote control (with a wireless remote control function)  Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ●When the wireless key battery is depleted ●Near a TV tower, radio station, electric power plant, airport or other facility

that generates strong radio waves

●When carrying a portable radio, cellular phone or other wireless communi-

cation devices

●When multiple wireless keys are in the vicinity ●When the wireless key is in contact with, or is covered by a metallic object ●When a wireless key (that emits radio waves) is being used nearby ●When the wireless key has been left near an electrical appliance such as a

personal computer

●If window tint with a metallic content or metallic objects are attached to the

rear window

 Vehicles with a smart key system P. 115

■Customization

Settings (e.g. unlocking function using a key) can be changed. (Customizable features: P. 570)

CAUTION

■To prevent an accident

Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●Always use a seat belt. ●Always lock all the doors. ●Ensure that all doors are properly closed. ●Do not pull the inside handle of the doors while driving.

The doors may be opened and the passengers are thrown out of the vehi- cle and it may result in serious injury or death. Be especially careful for the front doors, as the doors may be opened even if the inside lock buttons are in locked position.

●Set the rear door child-protector locks when children are seated in the rear

seats.

COROLLA_TMMMS_TMMC_U (OM12F00U)

106

3-2. Opening, closing and locking the doors

Trunk The trunk can be opened using the trunk opener, entry function, wireless remote control or key.

Opening the trunk from inside the vehicle Pull up the lever to release the trunk lid.

Opening the trunk from outside the vehicle ◆ Smart key system (if equipped)

While carrying the electronic key, press the button on the trunk lid.

When all the doors are unlocked with the power door lock sys- tem, the trunk can be opened without carrying the electronic key.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

107

◆ Wireless remote control (if equipped)  Vehicles without a smart key system

Press and hold the switch.

 Vehicles with a smart key system

Press and hold the switch.

◆ Key (vehicles with a key cylinder on the trunk lid)

the key clockwise

Turn release the trunk lid.

to

COROLLA_TMMMS_TMMC_U (OM12F00U)

108

3-2. Opening, closing and locking the doors

■Operation signal (with a wireless remote control function)

A buzzer sounds to indicate that the trunk has been opened.

■Trunk light

The trunk light turns on when the trunk is opened.

■Function to prevent the trunk being locked with the electronic key inside

(vehicles with a smart key system) ●When all doors are being locked, closing the trunk lid with the electronic key

left inside the trunk will sound an alarm. In this case, the trunk lid can be opened by pressing the trunk release but- ton on the trunk lid.

●Even when the spare electronic key is put in the trunk with all the doors locked, the key confinement prevention function can be activated so the trunk can be opened. In order to prevent theft, take all electronic keys with you when leaving the vehicle.

●Even when the electronic key is put in the trunk with all the doors are locked, the key may not be detected depending on the places and the surrounding radio wave conditions. In this case, the key confinement prevention function cannot be activated, causing the doors to lock when the trunk is closed. Make sure to check where the key is before closing the trunk.

●The key confinement prevention function cannot be activated if any one of

the doors is unlocked. In this case, open the trunk using the trunk opener.

■Internal trunk release lever

The trunk lid can be opened by pushing the glow-in-the-dark lever located on the inside of the trunk lid to the side. The lever will continue to glow for some time after the trunk lid is closed.

■Customization

The trunk unlocking operation can be changed. (Customizable features: P. 570)

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-2. Opening, closing and locking the doors

109

CAUTION

■Caution while driving

●Keep the trunk lid closed while driving.

If the trunk lid is left open, it may hit near-by objects while driving or lug- gage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard. Make sure to close the trunk lid before driving.

●Before driving the vehicle, make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving, caus- ing an accident.

●Never let anyone sit in the trunk. In the event of sudden braking or a colli-

sion, they are susceptible to death or serious injury.

■When a child is in the vehicle

Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not allow a child to play in the trunk.

If a child is accidentally locked in the trunk, the child could suffer from heat exhaustion, suffocation or other injuries.

●Do not allow a child to open or close the trunk lid.

Doing so may cause the trunk lid to operate unexpectedly, or cause the child’s hands, head, or neck to be caught by the closing trunk lid.

COROLLA_TMMMS_TMMC_U (OM12F00U)

110

3-2. Opening, closing and locking the doors

CAUTION

■Using the trunk

Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury. ●Remove any heavy loads, such as snow and ice, from the trunk lid before opening it. Failure to do so may cause the trunk lid to suddenly shut again after it is opened.

●When opening or closing the trunk lid, thoroughly check to make sure the

surrounding area is safe.

●If anyone is in the vicinity, make sure they are safe and let them know that

the trunk is about to open or close.

●Use caution when opening or closing the trunk lid in windy weather as it

may move abruptly in strong wind.

●The trunk lid may suddenly shut if it is not opened fully. It is more difficult to open or close the trunk lid on an incline than on a level surface, so beware of the trunk lid unexpectedly opening or closing by itself. Make sure that the trunk lid is fully open and secure before using the trunk.

●When closing the trunk lid, take extra care to prevent your fingers etc. from being caught.

●When closing the trunk lid, make sure to press it lightly on its outer surface. If the trunk handle is used to fully close the trunk lid, it may result in hands or arms being caught.

●Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

111

Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.)

● Locks and unlocks the doors (P. 97) ● Opens the trunk (P. 106) ● Starts the engine (P. 164)

■Antenna location

Antennas outside the cabin Antennas inside the cabin Antenna inside the trunk Antenna outside the trunk

: If equipped

COROLLA_TMMMS_TMMC_U (OM12F00U)

112

3-2. Opening, closing and locking the doors

■Effective range (areas within which the electronic key is detected)

When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles. (Only the doors detecting the key can be operated.)

When starting the engine or changing engine switch modes The system can be operated when the electronic key is inside the vehicle. When opening the trunk The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the trunk release button.

■Alarms and warning indicators

 Vehicles with a drive monitor display A combination of exterior and interior alarms as well as warning lights are used to prevent theft of the vehicle and unforeseeable accidents resulting from erroneous operation. Take appropriate measures for the warning light that comes on. (P. 496)  Vehicles with a multi-information display A combination of exterior and interior alarms as well as warning messages shown on the multi-information display are used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate mea- sures in response to any warning message on the multi-information display. (P. 503) The following table describes circumstances and correction procedures when only alarms are sounded.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

113

Correction procedure Close all of the doors and the doors again.

lock

Retrieve the electronic key from the passenger compartment and lock the doors again.

Retrieve the electronic key from the trunk and close the trunk lid.

Turn the engine switch off and the driver’s door.

close

Retrieve the electronic key from the vehicle and the doors again.

lock

Alarm

Situation

An attempt was made to lock the vehicle while a door was open. Vehicles with a drive monitor display: An attempt was made to lock the doors using the smart key system while the electronic key was still inside the vehicle. The trunk was closed while the electronic key was still inside the trunk and all the doors were locked. The engine switch was turned to ACCESSORY mode while the driver’s door was open (or the door was driver’s opened while the engine switch was in ACCESSORY mode). An attempt was made to lock either front door by opening a door and putting the inside lock button lock position, then closing the door by pulling on the outside door handle with the electronic key still inside the vehicle.

into

the

Exterior alarm sounds once for 5 seconds

Interior alarm sounds continuously

Interior alarm pings once and exterior alarm sounds once for 5 sec- onds*1

COROLLA_TMMMS_TMMC_U (OM12F00U)

114

3-2. Opening, closing and locking the doors

Alarm

Situation

Correction procedure

Interior alarm sounds continuously*1, 2

The driver’s door was opened while any shift position other than P was selected without turning off the engine switch.

Shift the shift lever to P.

*1: Vehicles with a drive monitor display *2: Vehicles with an continuously variable transmission

■Battery-saving function

The battery-saving function will be activated in order to prevent the electronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ●In the following situations, the smart key system may take some time to

unlock the doors. • The electronic key has been left in an area of approximately 6 ft. (2 m) of

the outside of the vehicle for 10 minutes or longer.

• The smart key system has not been used for 5 days or longer.

●If the smart key system has not been used for 14 days or longer, the doors cannot be unlocked at any doors except the driver’s door. In this case, take hold of the driver’s door handle, or use the wireless remote control or the mechanical key, to unlock the doors.

■Electronic Key Battery-Saving Function

twice while pressing and . Confirm that the electronic

When battery-saving mode is set, battery depletion is minimized by stopping the electronic key from receiving radio waves. Press holding key indicator flashes 4 times. While the battery-saving mode is set, the smart key system cannot be used. To cancel the function, press any of the elec- tronic key buttons.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-2. Opening, closing and locking the doors

115

■Conditions affecting operation

The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and engine immobi- lizer system from operating properly. (Ways of coping: P. 528) ●When the electronic key battery is depleted ●Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electrical noise

●When carrying a portable radio, cellular phone, cordless phone or other

wireless communication device

●When the electronic key is in contact with, or is covered by the following

metallic objects • Cards to which aluminum foil is attached • Cigarette boxes that have aluminum foil inside • Metallic wallets or bags • Coins • Hand warmers made of metal • Media such as CDs and DVDs

●When other wireless keys (that emit radio waves) are being used nearby ●When carrying the electronic key together with the following devices that

emit radio waves • Another vehicle’s electronic key or a wireless key that emits radio waves • Personal computers or personal digital assistants (PDAs) • Digital audio players • Portable game systems

●If window tint with a metallic content or metallic objects are attached to the

rear window

●When the electronic key is placed near a battery charger or electronic

devices

COROLLA_TMMMS_TMMC_U (OM12F00U)

116

3-2. Opening, closing and locking the doors

■Note for the entry function

●Even when the electronic key is within the effective range (detection areas),

the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near

the ground, or in a high place when the doors are locked or unlocked.

• The electronic key is near the ground or in a high place, or too close to

the rear bumper center when the trunk is opened.

• The electronic key is on the instrument panel, rear package tray or floor, or in the door pockets or glove box when the engine is started or engine switch modes are changed.

●Do not leave the electronic key on top of the instrument panel or near the door pockets when exiting the vehicle. Depending on the radio wave recep- tion conditions, it may be detected by the antenna outside the cabin and the doors will become lockable from the outside, possibly trapping the electronic key inside the vehicle.

●As long as the electronic key is within the effective range, the doors may be locked or unlocked by anyone. However, only the doors detecting the elec- tronic key can be used to unlock the vehicle.

●Even if the electronic key is not inside the vehicle, it may be possible to start

the engine if the electronic key is near the window.

●The doors may unlock or lock if a large amount of water splashes on the door handle, such as in the rain or in a car wash, when the electronic key is within the effective range. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.)

●If the wireless remote control is used to lock the doors when the electronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.)

●Touching the door lock or unlock sensor while wearing gloves may prevent

lock or unlock operation.

●When the lock operation is performed using the lock sensor, recognition sig- nals will be shown up to two consecutive times. After this, no recognition signals will be given.

●If the door handle becomes wet while the electronic key is within the effec- tive range, the door may lock and unlock repeatedly. In this case, follow the following correction procedures to wash the vehicle: • Place the electronic key in a location 6 ft. (2 m) or more away from the

vehicle. (Take care to ensure that the key is not stolen.)

• Set the electronic key to battery-saving mode to disable the smart key

system. (P. 114)

●Vehicles with a drive monitor display: If the electronic key is inside the vehi- cle and a door handle becomes wet during a car wash, a buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-2. Opening, closing and locking the doors

117

●Vehicles with a multi-information display: If the electronic key is inside the vehicle and a door handle becomes wet during a car wash, a message may be shown on the multi-information display and a buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.

●The lock sensor may not work properly if it comes into contact with ice,

snow, mud, etc. Clean the lock sensor and attempt to operate it again.

●If there is another electronic key in the detection area, it may take slightly

longer to unlock the doors after the door handle is gripped.

●Fingernails may scrape against the door during operation of the door han-

dle. Be careful not to injure fingernails or damage the surface of the door.

●A sudden handle operation or a handle operation immediately after entering the effective range may prevent the doors from being unlocked. Touch the door unlock sensor and check that the doors are unlocked before pulling the door handle again.

●Unlocking the vehicle may take more time if another electronic key is within

the effective range.

■When the vehicle is not driven for extended periods

●To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2

m) of the vehicle.

●The smart key system can be deactivated in advance. (P. 570)

■To operate the system properly

Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door lock prevention function may not operate.)

■If the smart key system does not operate properly

●Locking and unlocking the doors: Use the mechanical key. (P. 528) ●Starting the engine: P. 529

■Customization

Settings (e. g. smart key system) can be changed. (Customizable features: P. 570)

■If the smart key system has been deactivated in a customized setting

●Locking and unlocking the doors and opening the trunk:

Use the wireless remote control or mechanical key. (P. 107, 528)

●Starting the engine and changing engine switch modes: P. 529
●Stopping the engine: P. 165

COROLLA_TMMMS_TMMC_U (OM12F00U)

118

3-2. Opening, closing and locking the doors

■Certification for the smart key system

FCC ID: HYQ14FBA

 For the U.S.A. FCC ID: HYQ23AAB NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  For Canada NOTE: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.  For the U.S.A. FCC ID: NI4TMLF10-51
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  For Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-2. Opening, closing and locking the doors

119

CAUTION

■Caution regarding interference with electronic devices

●People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should keep away from the smart key system antennas. (P. 111) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves. Then, consult your doctor to see if you should disable the entry function.

●User of any electrical medical device other than implantable cardiac pace- makers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

Ask your Toyota dealer for details for disabling the entry function.

COROLLA_TMMMS_TMMC_U (OM12F00U)

120

3-3. Adjusting the seats

Front seats

Adjustment procedure  Manual seat

Seat position adjustment lever Seatback angle adjustment lever

 Power seat (driver’s side only)

Vertical height adjustment lever (driver’s side only)

position

adjustment

Seat switch Seatback angle adjustment switch

(front) angle

Seat cushion adjustment switch Vertical height adjustment switch

COROLLA_TMMMS_TMMC_U (OM12F00U)

3-3. Adjusting the seats

121

CAUTION

■Seat adjustment

●Be careful that the seat does not hit passengers or luggage. ●Do not recline the seat more than necessary when the vehicle is in motion

to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.

●Manual seat only: After adjusting the seat, make sure that the seat is

locked in position.

■When adjusting the seat positions

Make sure to leave enough space around the feet so they do not get stuck.

COROLLA_TMMMS_TMMC_U (OM12F00U)

122

3-3. Adjusting the seats

Rear seats

The seatbacks of the rear seats can be folded down.

Folding down the rear seatbacks Stow the rear outside seat belt buckles and stow the rear cen- ter seat belt buckle as shown.

Pull the seatback lock release knob and fold the seatback down.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-3. Adjusting the seats

123

CAUTION

■When folding the rear seatbacks down

Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not fold the seatbacks down while driving. ●Stop the vehicle on level ground, set the parking brake and shift the shift lever to P (automatic transmission or continuously variable transmission) or N (manual transmission).

●Do not allow anyone to sit on a folded seatback or in the trunk while driv-

ing.

●Do not allow children to enter the trunk. ●Do not allow anyone to sit on the rear center seat if the rear right seat is folded down, as the seat belt buckle for the rear center seat belt is then concealed under the folded seat and cannot be used.

●Be careful not to catch your hand when folding the rear seatbacks. ●Adjust the position of the front seat before folding down the rear seatbacks so that the front seat does not interfere with the rear seatbacks when fold- ing down the rear seatbacks.

■After returning the seatback to the upright position

Observe the following precautions. Failure to do so may result in death or serious injury. ●Make sure that the seatback is securely locked in position by lightly rocking it back and forth. If the seatback is not securely locked, the red marking will be visible on the seatback lock release knob. Make sure that the red marking is not visible.

●Check that the seat belts are not twisted or caught under the seat.

NOTICE

■When the rear right seatback is folded down

Make sure the luggage loaded in the enlarged trunk will not damage the webbing of the rear center seat belt.

COROLLA_TMMMS_TMMC_U (OM12F00U)

124

3-3. Adjusting the seats

Head restraints

Head restraints are provided for all seats.

Front seats

Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.

Rear seats  Type A

Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.

 Type B

Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.

Lock release button

Lock release buttons

Lock release button

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-3. Adjusting the seats

125

■Removing the head restraints (except for fixed rear head restraints)

Pull the head restraint up while pressing the lock release button.

Lock release button

■Installing the head restraints (except for fixed rear head restraints)

 Front seats and rear outside seats Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.

 Rear center seat Align the head restraint with the installa- tion holes and push it down to the lowest lock position while pressing the lock release button.

Lock release button

Lock release button

■Adjusting the height of the head restraints (except for fixed rear head

restraints) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

■Adjusting the rear center seat head restraint

Always raise the head restraint one level from the stowed position when using.

COROLLA_TMMMS_TMMC_U (OM12F00U)

126

3-3. Adjusting the seats

CAUTION

■Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ●Use the head restraints designed for each respective seat. ●Adjust the head restraints to the correct position at all times. ●After adjusting the head restraints, push down on them and make sure

they are locked in position.

●Do not drive with the head restraints removed.

COROLLA_TMMMS_TMMC_U (OM12F00U)

3

3-4. Adjusting the steering wheel and mirrors

127

Steering wheel

Adjustment procedure

Hold the steering wheel and push the lever down.

Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.

Horn To sound the horn, press on or close to the

mark.

COROLLA_TMMMS_TMMC_U (OM12F00U)

128

3-4. Adjusting the steering wheel and mirrors

CAUTION

■Caution while driving

Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury.

■After adjusting the steering wheel

Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury. Also, the horn may not