2016 Ford Mustang Owners Manual

EST-M2C118-A

WSS-M2C938-A MERCON LV

WSS-M2C938-A MERCON LV

WSS-M2C200-D2

WSS-M14P19-A

WSS-M14P19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M1C231-B

ESB-M1C93-B

--

280

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Name

Specification

--

Lock cylinders (Canada): Penetrating Fluid CXC-51-A Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1
*For complete refill of limited slip Ford axles, add 3.28 oz. (97 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A. Ford rear axles contain a synthetic lubricant that does not require changing unless you submerge the axle in water.

--

If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.

• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. We recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

An oil with this trademark symbol conforms to current engine, emission system protection standards and fuel economy requirements of the International Lubricant Standardization and Approval Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.

281

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142732Capacities and Specifications

Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.

Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. CAPACITIES AND SPECIFICATIONS - 3.7L Capacities

WARNING

The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury. Have the air conditioning refrigerant system serviced only by qualified personnel.

Item

Engine oil Engine coolant Brake fluid Rear axle fluid Rear axle friction modifier

Automatic transmission fluid*

Capacity

6.0 qt (5.7 L) 12.4 qt (11.7 L)

Between MIN/MAX on brake fluid reservoir

3.2 pt (1.5L)

3.28 fl oz (97 ml)

12.0 qt (11.4 L)

2.7 qt (2.6 L)

Manual transmission fluid* Windshield washer fluid Fuel tank A/C refrigerant A/C refrigerant compressor oil 3.4 fl oz (100.5 ml) *Approximate dry fill capacity. Actual amount may vary during fluid changes.

Fill as required 16.0 gal (60.6 L)

21 oz (0.6 kg)

282

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Specifications Materials

Name Recommended motor oil (U.S.): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended motor oil (Canada): Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12
Recommended motor oil (Mexico): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil MXO-5W20-QSP Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Rear axle fluid: Motorcraft SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL

Rear axle friction modifier (U.S. and Mexico):* Motorcraft Additive Friction Modifier XL-3

Specification

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M97B44-D2

WSS-M97B44-D2

WSS-M6C65-A2

WSS-M2C942-A

EST-M2C118-A

283

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Name

Rear axle friction modifier (Canada):* Motorcraft Additive Friction Modifier CXL-3
Automatic transmission fluid (U.S. and Mexico): Motorcraft MERCON LV Automatic Transmission Fluid XT-10-QLVC Automatic transmission fluid (Canada): Motorcraft MERCON LV Automatic Transmission Fluid CXT-10-LV12
Manual transmission fluid : Motorcraft Dual Clutch Transmission Fluid XT-11-QDC Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S.): Motorcraft R-134a Refrigerant YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant (Mexico): Motorcraft R-134a Refrigerant MYN-19
A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1

Specification

EST-M2C118-A

WSS-M2C938-A MERCON LV

WSS-M2C938-A MERCON LV

WSS-M2C200-D2

WSS-M14P19-A

WSS-M14P19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M1C231-B

ESB-M1C93-B

--

284

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Name

Specification

--

Lock cylinders (Canada): Penetrating Fluid CXC-51-A Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1
*For complete refill of limited slip Ford axles, add 3.28 fl oz. (97 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A. Ford rear axles contain a synthetic lubricant that does not require changing unless you submerge the axle in water.

--

If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage, which the vehicle

warranty does not cover. Longer engine cranking periods. Increased emission levels.

• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. Only use fluid that meets Ford specifications. We recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

An oil with this trademark symbol conforms to current engine, emission system protection standards and fuel economy requirements of the International Lubricant Standardization and Approval Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.

285

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142732Capacities and Specifications

Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.

Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. CAPACITIES AND SPECIFICATIONS - 5.0L Capacities

WARNING

The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.

Item

Engine oil Engine coolant Engine coolant with Track Pack (If equipped) Brake fluid Rear axle fluid Rear axle friction modifier

Automatic transmission fluid*

Capacity

8.0 qt (7.6 L)

13.6 qt (12.88 L) 15.2 qt (14.4 L)

Between MIN/MAX on brake fluid reservoir

3.2 pt (1.5L)

3.28 fl oz (97 ml)

11.8 qt (11.17 L)

2.7 qt (2.6 L)

Manual transmission fluid* Windshield washer fluid Fuel tank A/C Refrigerant A/C Refrigerant Compressor Oil *Approximate dry fill capacity. Actual amount may vary during fluid changes.

Fill as required 16.0 gal (60.6 L) 24.0 oz (0.68 kg) 4.1 fl oz (120 ml)

286

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Specifications Materials

Name Recommended motor oil (U.S.): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended motor oil (Canada): Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil CXO-5W20-LSP12
Recommended motor oil (Mexico): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil MXO-5W20-QSP Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Rear axle fluid: Motorcraft SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL

Rear axle friction modifier (U.S. and Mexico):* Motorcraft Additive Friction Modifier XL-3

Specification

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M97B44-D2

WSS-M97B44-D2

WSS-M6C65-A2

WSS-M2C942-A

EST-M2C118-A

287

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Name

Rear axle friction modifier (Canada):* Motorcraft Additive Friction Modifier CXL-3
Automatic transmission fluid (U.S. and Mexico): Motorcraft MERCON LV Automatic Transmission Fluid XT-10-QLVC Automatic transmission fluid (Canada): Motorcraft MERCON LV Automatic Transmission Fluid CXT-10-LV12
Manual transmission fluid: Motorcraft Dual Clutch Transmission Fluid XT-11-QDC Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S.): Motorcraft R-134a Refrigerant YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant (Mexico): Motorcraft R-134a Refrigerant MYN-19
A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1

Specification

EST-M2C118-A

WSS-M2C938-A MERCON LV

WSS-M2C938-A MERCON LV

WSS-M2C200-D2

WSS-M14P19-A

WSS-M14P19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M1C231-B

ESB-M1C93-B

--

288

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Capacities and Specifications

Name

Specification

--

Lock cylinders (Canada): Penetrating Fluid CXC-51-A Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1
*For complete refill of limited slip Ford axles, add 3.28 oz. (97 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A. Ford rear axles contain a synthetic lubricant that does not require changing unless you submerge the axle in water.

--

If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.

• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. Only use fluid that meets Ford specifications. We recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

An oil with this trademark symbol conforms to current engine, emission system protection standards and fuel economy requirements of the International Lubricant Standardization and Approval Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.

289

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142732Capacities and Specifications

Note: Ford recommends using DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.

290

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

GENERAL INFORMATION Radio Frequencies and Reception Factors

AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: • AM: 530, 540-1700, 1710 kHz •

FM: 87.9-107.7, 107.9 MHz

Distance and strength

Terrain

Station overload

Radio Reception Factors

The further you travel from an AM or FM station, the weaker the signal and the weaker the reception. Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with the reception. When you pass a ground-based broadcast repeating tower, a stronger signal may overtake a weaker one and result in the audio system muting.

Do not expose discs to direct sunlight or heat sources for extended periods. MP3 and WMA Track and Folder Structure Audio systems capable of recognizing and playing MP3 and WMA individual tracks and folder structures work as follows: •

There are two different modes for MP3
and WMA disc playback: MP3 and WMA track mode (system default) and MP3 and WMA folder mode.

• MP3 and WMA track mode ignores any folder structure on the MP3 and WMA disc. The player numbers each MP3
and WMA track on the disc (noted by the MP3 or WMA file extension) from T001 to a maximum of T255. The maximum number of playable MP3 and WMA files may be less depending on the structure of the CD and exact model of radio present.

CD and CD Player Information Note: CD units play commercially pressed 4.75-inch (12 centimeter) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed. You should use a permanent felt tip marker rather than adhesive labels on your homemade CDs. Ballpoint pens may damage CDs. Please contact an authorized dealer for further information. Note: Do not use any irregularly shaped discs or discs with a scratch protection film attached. Always handle discs by their edges only. Clean the disc with an approved CD cleaner only. Wipe it from the center of the disc toward the edge. Do not clean in a circular motion.

291

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

• MP3 and WMA folder mode represents

a folder structure consisting of one level of folders. The CD player numbers all MP3 and WMA tracks on the disc (noted by the MP3 or WMA file extension) and all folders containing MP3 and WMA files, from F001 (folder) T001 (track) to F253 T255.

• Creating discs with only one level of

folders helps with navigation through the disc files.

If you are burning your own MP3 and WMA discs, it is important to understand how the system reads the structures you create. While various files may be present (files with extensions other than MP3 and WMA), only files with the MP3 and WMA extension are played; other files are ignored by the system. This enables you to use the same MP3 and WMA disc for a variety of tasks on your work computer, home computer and your in-vehicle system. In track mode, the system displays and plays the structure as if it were only one level deep (all MP3 and WMA files play, regardless of being in a specific folder). In folder mode, the system only plays the MP3 and WMA files in the current folder.

AUDIO UNIT - VEHICLES WITH: AM/FM/CD/SYNC/SATELLITE RADIO

WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

Note: Depending on your vehicle option package, your system may look different from what you see here. Note: Some features, such as Sirius satellite radio, may not be available in your location. Check with an authorized dealer.

292

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

Display screen: Shows audio and SYNC information. Number block: In radio mode, store your favorite stations for later access. When tuned to any station, press and hold a preset button until sound returns. In CD mode, press a button to select a track. In phone mode, press the buttons to enter a phone number. End phone call: Press this button to end a phone call. Function buttons: Select different functions of the audio system depending on which mode you are in (such as Radio mode or CD mode). TUNE: Turn to search the frequency band in individual increments. Seek: In radio mode, select a frequency band and press this button. The system stops at the first station up the band. Press and hold the button to move quickly to the next strong radio station or memory preset. In CD mode, press this button to select the next track. Press and hold the button to move quickly forward through the current track. Eject: Press this button to eject a CD.

293

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E174552Audio System

Cursor arrows and OK: Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. Play/Pause: Press to either play or pause a track when listening to a CD. Seek: In radio mode, select a frequency band and press this button. The system stops at the first station down the band. Press and hold the button to move quickly to the previous strong radio station or memory preset. In CD mode, press this button to select the previous track. Press and hold the button to move quickly backward through the current track. VOL and Power: Press this button to turn the system off and on. Turn it to adjust the volume. Pick-up or Make phone call: Press this button to either pick-up an incoming phone call or to make a phone call. MENU: Press this button to access different audio system features. PHONE: Press this button to access the phone features of the SYNC® system. See SYNC™ (page 302). Clock: Press this button to access the clock setting. Use the center arrow controls to change the hours and minutes. You can also set the clock by pressing the MENU button and scrolling to Clock Settings. MEDIA: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. RADIO: Press this button to listen to the radio or change radio frequencies bands. Press the function buttons below the radio screen to select different radio functions. MUTE or SIRIUS: Press this button to mute the playing audio, or if equipped, listen to Sirius satellite radio. CD: Press this button to listen to a CD. Press the function buttons below the radio screen to select on-screen options of Repeat or Shuffle. Sound: Press this button to access settings for Treble, Midrange, Bass, Fade and Balance. Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. Sound settings can be set for each audio source independently.

294

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

AUDIO UNIT - VEHICLES WITH: PREMIUM AM/FM/CD

Note: The touchscreen system controls most of the audio features. See your SYNC information.

WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

VOL: Turn the dial to adjust the system volume. Seek and Reverse: In radio mode, select a frequency band and press this button. The system stops at the first station down the band. Press and hold the button to move quickly to the previous strong radio station or memory preset. In CD mode, press this button to select the previous track. Press and hold the button to move quickly backward through the current track. Power: Press this button to turn the system off and on.

295

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E174101ABDCEFGAudio System

Seek and Fast Forward: In radio mode, select a frequency band and press this button. The system stops at the first station up the band. Press and hold the button to move quickly to the next strong radio station or memory preset. In CD mode, press this button to select the next track. Press and hold the button to move quickly forward through the current track. TUNE: Once you select a frequency band, turn the dial to find the desired station. Eject: Press this button to eject a CD. Sound: Press this button to access settings for Treble, Midrange, Bass, Fade and Balance.

DIGITAL RADIO Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion. For more information, and a guide to available stations and programming, please visit www.hdradio.com. When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the HD Radio logo on your screen. When this logo is available, you may also see Title and Artist fields on-screen.

The multicast indicator appears in FM mode (only) if the current station is broadcasting multiple digital broadcasts. The highlighted numbers signify available digital channels where new or different content is available. HD1 signifies the main programming status and is available in analog and digital broadcasts. Other multicast stations (HD2 through HD7) are only available digitally. When HD Radio broadcasts are active, you can access the following functions: • Scan allows you to hear a brief

sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels. You may see the HD logo appear if the station has a digital broadcast.

• Memory presets allow you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when finished. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.

Note: As with any saved radio station, you cannot access the saved station if your vehicle is outside the station’s reception area.

296

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

HD Radio Reception and Station Troubleshooting

Reception area

Station blending

Potential reception issues If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again. However, if you are listening to any of the possible HD2-HD7 multicast channels, the station mutes and stays muted unless it is able to connect to the digital signal again. When the system first receives a station (aside from HD2- HD7 multicast stations), it first plays the station in the analog version. Once the receiver verifies the station is an HD Radio station, it shifts to the digital version. Depending on the station quality, you may hear a slight sound change when the station changes from analog to digital. Blending is the shift from analog to digital sound or digital back to analog sound.

In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate.

297

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

Potential station issues

Issues

Cause

Action

Echo, stutter, skip or repeat in audio. Increase or decrease in audio volume. Sound fading or blending in and out.

There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct Tune.

Cannot access HD2 or HD3
multicast channel when recalling a preset or from a direct tune. Text information does not match currently playing audio.

There is no text information shown for currently selected frequency.

This is poor time alignment by the radio broadcaster.

No action required. This is a broadcast issue.

The radio is shifting between analog and digital audio.

The digital multicast is not available until the HD Radio broadcast is decoded. Once decoded, the audio is avail- able. The previously stored multicast preset or direct tune is not available in your current reception area. Data service issue by the radio broadcaster.

Data service issue by the radio broadcaster.

No action required. The reception issue may clear up as you continue to drive. No action required. This is normal behavior. Wait until the audio is available.

No action required. The station is not available in your current location.

Fill out the station issue form at website listed below.* Fill out the station issue form at website listed below.* No action required. This is normal behavior.

HD2-HD7 stations not found when Scan is pressed. * http://www.ibiquity.com/automotive/report_radio_station_experiences

Pressing Scan disables HD2-HD7 channel search.

HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion.

SATELLITE RADIO (If Equipped) SIRIUS® broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SIRIUS satellite radio channels, visit www.siriusxm.com in the United States, www.siriusxm.ca in Canada, or call SIRIUS at 1-888-539-7474.

298

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License. Satellite Radio Reception Factors

Potential satellite radio reception issues

Antenna obstructions

Terrain

Station overload

Satellite radio signal interfer- ence

For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible. Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception. When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Your display may show ACQUIRING . . . to indicate the interference and the audio system may mute.

SIRIUS® Satellite Radio Service Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.

SIRIUS satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SIRIUS satellite radio system includes hardware and a limited subscription term, which begins on the date of sale or lease of your vehicle. See an authorized dealer for availability. For more information on extended subscription terms (a service fee is required), the online media player and a complete list of SIRIUS satellite radio channels, and other features, please visit www.siriusxm.com in the United States, www.siriusxm.ca in Canada, or call SIRIUS at 1-888-539-7474. Satellite Radio Electronic Serial Number (ESN) You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, tune to channel 0.

299

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142593Audio System

Condition

Action

Radio requires more than two seconds to produce audio for the selected channel. There is an internal module or system failure present.

Troubleshooting Message

Acquiring…

Satellite antenna fault SIRIUS system failure

No action required. This message should disappear shortly.

If this message does not clear shortly, or with an igni- tion key cycle, your receiver may have a fault. See an authorized dealer for service. Tune to another channel or choose another preset. Contact SIRIUS at 1-888- 539-7474 to subscribe to the channel, or tune to another channel. The signal is blocked. When you move into an open area, the signal should return.

No action required. The process may take up to three minutes. Contact SIRIUS at 1-888- 539-7474 to resolve subscription issues. Use the channel guide to turn off the Lock or Skip function on that station. No action required.

Invalid Channel

Unsubscribed Channel

The channel is no longer available. Your subscription does not include this channel.

No Signal

Updating…

Questions? Call 1-888-539-7474

None found Check Channel Guide

Subscription Updated

The signal is lost from the SIRIUS satellite or SIRIUS tower to your vehicle antenna. Update of channel programming in progress.

Your satellite service is no longer available.

All the channels in the selected category are either skipped or locked. SIRIUS has updated the channels available for your vehicle.

300

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Audio System

USB PORT (If Equipped)

The USB port allows you to plug in media playing devices, memory sticks and charge devices (if supported). See your SYNC information. MEDIA HUB (If Equipped) The media hub is located in the center console and has the following features:

See your SYNC information.

301

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E176344E201595SYNC™ (If Equipped)

GENERAL INFORMATION

SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your

portable music player.

• Use 911 Assist and applications, such

as Spotify and Glympse, via SYNC AppLink.*

• Access phonebook contacts and music

using voice commands. Stream music from your connected phone. Text message.

•

•

• Use the advanced voice recognition

system.

• Charge your USB device (if your device

supports this).

*These features are not available in all markets and may require activation. Available AppLink enabled apps vary by market. Make sure that you review your device's manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST.

302

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E198355SYNC™ (If Equipped)

Sunday, 10:30am-7:30pm EST. In the United States, call 1-800-392-3673. In Canada, call 1-800-565-3673. Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? •

Essential for keeping up with the latest software downloads available for SYNC.

• Access to customer support for any

questions you may have.

Driving Restrictions For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mi (5 km). Safety Information

WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

When using SYNC: • Do not operate playing devices if the

power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.

• Do not leave playing devices in your

vehicle during extreme conditions as it could cause them damage. See your device's manual for further information. • Do not attempt to service or repair the

system. See an authorized dealer.

Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cellular phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported media content. The system also records a short development log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur. The cellular profile, media device index, and development log will remain in the vehicle unless you delete them and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use the system or the vehicle, we recommend you perform a Master Reset to erase all stored information.

303

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the section on 911 Assist. See SYNC™ Applications and Services (page 318).

USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is around you. Initiating a Voice Session

Press the voice button. A list of available voice commands appears in the display.

Global Voice Commands These voice commands are always available. You can say them at any time.

(cancel | exit)

help

(main menu | start again)

Global voice commands

This command ends the voice session. You can also cancel a session by holding the voice button for two or more seconds. This command provides you with hints, examples and instructions. This command restarts the voice session from the initial starting point.

You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where; (cancel | exit) appears you say; cancel or exit.

Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands. Before giving a voice command, wait for the system announcement to finish, followed by a single tone. Any command spoken before this does not register with the system.

•

•

•

Speak naturally, without long pauses between words. You can interrupt the system at any time while it is speaking by pressing the voice button. You can cancel a voice session by pressing and holding the voice button.

304

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142599SYNC™ (If Equipped)

System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction. You can customize the voice recognition system to provide more or less instruction and feedback.

The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time. Adjusting the Interaction Level

Press the voice button. When prompted, say:

Voice Command

Action and Description

voice settings Then either of the following: interaction mode novice

interaction mode advanced

Provides more detailed interaction and guidance. (Recommended for first time users.) Provides less audible interaction and guid- ance.

Confirmation Prompts Confirmation prompts are short questions the system asks when it is not sure of your request or when there is more than one possible response to your request. To adjust this setting press the voice button, when prompted say:

Voice Command

Action and Description

voice settings Then either of the following: confirmation prompts off

confirmation prompts on

Make a best guess from the command; you may still occasionally be asked to confirm settings. Clarify your voice command with a short question.

Phone Confirmation Using phone confirmations the system asks you to verify before placing any calls.

305

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142599SYNC™ (If Equipped)

To adjust this setting press the voice button, when prompted say:

Voice Command

voice settings Then any of the following: phone confirmation on

phone confirmation off

Changing the Voice Settings In addition to using voice commands to change the voice settings, you can also use the menu in the audio display. To change the voice settings press the Menu button then select: Menu Item

SYNC-Settings Voice settings

USING SYNC™ WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone's functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • • Using privacy mode. • Dialing a number. • Redialing.

Ending a call.

Action and Description

When enabled, this feature will prompt you to confirm any voice initiated call command prior to the call being placed. The system will make a best guess; you may still occasionally be asked to confirm settings.

• Call waiting notification. • Caller ID. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone's compatibility, see your phone's manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. Pairing a Phone for the First Time Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls. Note: SYNC can support downloading up to approximately 4000 entries per Bluetooth-enabled cellular phone. Note: Make sure to switch on the ignition and the radio. Shift the transmission into park (P) for automatic transmission or first gear for manual transmission. Using the Audio System Note: To scroll through the menus, press the up and down arrows on your audio system.

306

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

1. Make sure to switch on your phone's Bluetooth feature before starting the search. See your device's manual if necessary.

2. Press the PHONE button. When the

audio display indicates there is no paired phone, select the option to add.

3. When a message to begin pairing

appears in the audio display, search for SYNC on your phone to start the pairing process.

4. When prompted on your cell phone’s display, confirm that the PIN provided by SYNC matches the PIN displayed on your cell phone. Your phone is now paired and the display indicates that the pairing was successful. If you are prompted to enter a PIN on your device, enter the PIN displayed on the screen. The display indicates when the pairing is successful.

Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook. Using Voice Commands

Make sure to switch on your phone's Bluetooth feature before starting the search. See

your device's manual if necessary.

Press the voice and when prompted say:

Voice Command

Action and Descrip-

tion

Follow the instruc- tions on the audio display.

(pair ([Bluetooth] device | phone | Bluetooth audio) | add phone) You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where; (what's | what is) appears you say; what's or what is. The commands that have [ ] around the word means that the word is optional. Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook. Pairing Subsequent Phones Note: Make sure to switch on the ignition and the radio. Shift the transmission into park (P) for automatic transmission or first gear for manual transmission. Note: To scroll through the menus, press the up and down arrows on your audio system. 1. Make sure to switch on your phone's Bluetooth feature before starting the search. See your device's manual if necessary.

2. Press the PHONE button. 3. Select the option for Bluetooth

Devices.

4. Press the OK button.

307

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142599SYNC™ (If Equipped)

5. Select the option to add. This starts

the pairing process.

6. When a message to begin pairing

appears in the audio display, search for SYNC on your device.

7. When prompted on your cell phone’s display, confirm that the PIN provided by SYNC matches the PIN displayed on your cell phone. Your phone is now paired and the display indicates that the pairing was successful. If you are prompted to enter a PIN on your device, enter the PIN displayed on the screen. The display indicates when the pairing is successful.

SYNC may prompt you with more cell phone options. Your cell phone may also prompt you to give SYNC permission to access information. For more information on your cell phone’s capability, see your cell phone’s manual and visit the website. Phone Voice Commands

Press the voice button. When prompted, say any of the following:

Voice Command (phone | Blackberry | iPhone) Then say any of the following: call (___) call ___ at home call ___ ((in|at) [the] office | at work) call ___ on (cell | mobile) call ___ on other dial [[a] number]

([go to] privacy | transfer to phone | privacy on)

Voice Command

(hold call [on] | place call on hold)

join (calls | call)

mute call [on]

(mute call off | un-mute call)

(turn ringer on | silent mode off) (turn ringer off | silent mode [on]) [text] (messages | message)

help ___ is a dynamic listing that should be the name of a contact in your phonebook. For example you could say "Call Home". 1 See Dial table below. 2 These commands are only valid while in a phone call. 3 See the text message table below. Dial Commands Press the voice button and when prompted say any of the following commands:

Voice Commands

411 (four-one-one), 911 (nine-one-one)

700 (seven hundred) 800 (eight hundred) 900 (nine hundred)

Clear (deletes all entered digits)

Delete (deletes last set of digits entered)

Number <0-9>

308

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142599SYNC™ (If Equipped)

Voice Commands

Plus

Pound (#) Star (*)

Note: To exit dial mode, press and hold the phone button or press any button on the audio system. To access text messages say:

Voice Command [text] (messages | message) Then say any of the following: (listen to | read) ([text] message) forward (text | [text] message) reply to (text | [text] message) call [sender] Phonebook Hints To hear how the SYNC system speaks a name browse phonebook, select a contact and press:

Menu Item

Hear it

Changing Devices Using Voice Commands Using SYNC, you can easily access multiple phones, ipods, or USB devices. to switch devices say:

(connect | device) ___

Voice Command

You can state the name of the desired device, such as “My iPhone”,“My Galaxy” or“My iPod”. SYNC may ask you to confirm the type of device (Phone, USB, or

Bluetooth Audio).

Making Calls

Press the voice button. When prompted, say:

Voice Command

call [[a] name] dial [[a] number]

SYNC prompts you to say the numbers that you wish to dial. After you say the numbers, the system confirms it. You can then say:

When the system has stated the number, you say any of the following:

Voice Command

(dial | send) (delete | correct)

This initiates the call. This erases the spoken digits.

To end the call, press the end call button on the steering wheel or select the end call option in the audio display.

309

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

E142599SYNC™ (If Equipped)

Receiving Calls Accepting calls When receiving a call, you can answer the call by pressing the accept call button on the steering wheel or use the screen. To use the screen to accept a call select:

Menu Item

Accept Rejecting Calls When receiving a call, you can reject the call by pressing the reject call button on the steering wheel or use the screen.

To use the screen to reject a call select:

Menu Item

Reject

Ignore the call by doing nothing. Phone Options during an Active Call During an active call, you have more menu features that become available, such as putting a call on hold or joining calls. To access this menu, choose one of the options available at the bottom of the audio display or select More to choose from the following options:

Menu Item

Description and action

Mic. off

Privacy

Hold

Dial a number

Join calls

Phonebook

Switch your vehicle's microphone off. To switch the microphone on, select the option again. Switch a call from an active hands-free environment to your cellular phone for a more private conversation. When selected, the audio display indicates the call is private. Put an active call on hold. When selected, the audio display indicates the call is on hold. Enter numbers using the audio system's numeric keypad (for example, numbers for passwords). Join two separate calls. The system supports a maximum of three callers on a multiparty or conference call. 1. Select the More option. 2. Access the desired contact through the system or use voice commands to place the second call. Once actively in the second call, select the More option. 3. Scroll to the option to join calls and press the OK button. Access your phonebook contacts. 1. Select the More option. 2. Scroll to the option for phonebook and press the OK button. 3. Scroll through your phonebook contacts.

310

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

Menu Item

Description and action

Call History

4. Press the OK button again when the desired contact appears in the audio display. 5. Press the OK button or dial button to call the selection. Access your call history log. 1. Select the More option. 2. Scroll to the option for call history and press the OK button. 3. Scroll through your call history options (incoming, outgoing or missed). 4. Press the OK button again when the desired selection appears in the audio display. 5. Press the OK button or dial button to call the selection. 1. Press the PHONE button to enter the

phone menu.

2. Select one of the options available.

Accessing Features through the Phone Menu You can access your call history, phonebook, sent text messages, as well as access phone and system settings.

Display

Dial a number Phonebook

Call History

Speed Dial

Description and action

Enter numbers using the audio system's numeric keypad. Access your downloaded phonebook. 1. Press the OK button to confirm and enter. You can use the options at the bottom of the screen to access an alphabetical category quickly. You can also use the letters on the audio system's numeric keypad to jump in the list. 2. Scroll through your phonebook contacts. 3. Press the OK button again when the desired selection appears in the audio display. 4. Press the OK button or dial button to call the selection. Access any previously dialed, received or missed calls. 1. Press the OK button to select. 2. Scroll to select incoming, outgoing or missed calls. Press the OK button to make your selection. 3. Press the OK button or dial button to call the selection. Select 1 of 10 speed dial entries. To set a speed dial entry, go to the phonebook and then press and hold one of the numbers on the audio system's numeric keypad.

311

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

Display

Text messaging BT Devices

Phone settings

Description and action

Send, download and delete text messages. Access the option for Bluetooth Device menu listings (add, connect, set as primary, on or off, delete). View various settings and features on your phone.

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages.

Note: This is a speed-dependent feature and is only available when your vehicle is traveling at 3.1 mph (5 km/h) or less. When a new message arrives, an audible tone sounds and the audio display indicates you have a new message. To hear the message you can say:

Voice command

(listen to | read) ([text] message)

Description and

action

Select this option to have the system read the message to you.

Using the screen you also have the following options: Description and action

Select this option, or do nothing, and the message goes into your text message inbox. Select the view option to open the text message. Once selected, you have the ability to have the message read to you, to view other messages. For additional options select: More...

If you select this option, use the arrow button to scroll through the following options:

Menu Item Ignore

View

312

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

Menu Item

Description and action

Reply to sender Call sender

Forward msg.

Press the OK button to access, and then scroll through a list of pre-defined messages to send. Press the OK button to call the sender of the message. Press the OK button to forward the message to anyone in your phonebook or call history. You can also choose to enter a number.

Sending, Downloading and Deleting Your Text Messages 1. Press the PHONE button. Choose from the following options:

2. Select the text messaging option, and

then press the OK button.

Menu Item

New

View

Delete

More...

Description and action

Allows you to send a new text message based on a pre-defined set of 15
messages. Allows you to read the full message and, in addition, provides the option to have the system read the message to you. To go to the next message, select the More option. This allows you to reply to the sender, call the sender or forward the message. Allows you to delete current text messages from the system (not your cellular phone). The audio display indicates when the system has deleted all your text messages. Allows you to delete all messages or manually trigger a download of all unread messages from your cellular phone.

Sending a Text Message Note: You can only send a text message to one recipient at a time. 1. Select the send option when the

desired selection highlights in the audio display.

2. Select the confirmation option when

the contact appears.

3. Press the OK button again to confirm when the system asks if you want to send the message. A pre-defined signature appears on each text message.

Note: You can send text messages either by choosing a contact from the phonebook and selecting the text option from the audio display or by replying to a received message in the inbox.

313

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone and text message notification, modify your Scroll to select from the following options:

phonebook, and set up automatic download. 1. Press the PHONE button. 2. Scroll until the phone settings option appears, and then press the OK button.

Menu Item

Set as master

Phone status

Set ringtone

Text msg notify

Phonebook pref.

Description and action

If this option is checked, the system uses the cellular phone as the master when there is more than one cellular phone paired to the system. This option can be changed for all cellular phones (not only the active phone) using the Bluetooth Devices menu. See the cellular phone name, provider name, cellular phone number, and signal level. When done, press the left arrow buttons to return to the phone status menu. Select which ringtone sounds during an incoming call (one of the system's tones or your cellular phone's). If your phone supports in-band ringing, your phone's ringtone sounds when you choose the cellular phone ringtone option. 1. Press the OK button to select and scroll to hear each ringtone. 2. Press the OK button to select a ringtone. Have the option of hearing an audible tone to notify you when a text message arrives. Press the OK button to switch the audible tone off or on. Modify the contents of your phonebook (such as add, delete or download). Press the OK button to select and scroll between the choices in the phonebook preferences table below.

314

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

Menu Item

Add contacts

Delete

Download now

Auto-download

Sorting Pref.

SYNC™ (If Equipped)

Phonebook preferences

Push the desired contacts on your cellular phone. See your device's manual on how to push contacts. Press the OK button to add more contacts from your phonebook. When a message asking you to delete appears, select the option to confirm. Press the OK button to delete the current phonebook and call history. The system takes you back to the menu for phone settings. Press the OK button to select and download your phone- book to the system. When automatic download is on, the system deletes any changes (additions or deletions) saved in the system since your last download. When automatic download is off, the system does not download your phonebook when your cellular phone connects to SYNC. You can only access your phonebook, call history and text messages when your paired cellular phone connects to the system. Check or uncheck this option to download your phonebook automatically each time your phone connects to the system. Download times are phone- dependent and quantity-dependent. Enabling this feature allows you to select how your contacts are displayed. You can select: First/Last name

Last/First name 1. Press the PHONE button. 2. Scroll until Bluetooth Devices appears,

and then press the OK button.

Bluetooth Devices The Bluetooth Devices menu allows you to add, connect and delete devices as well as set a phone as primary. Select from the following options:

Menu Item

Description and action

Add

Pair additional phones to the system. 1. Select the option to add to start the pairing process.

315

Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enUSA, Edition date: 10/2015, Second Printing

SYNC™ (If Equipped)

Menu Item

Description and action

2. When a message to begin pairing appears in the audio display, search for SYNC on your phone. See your phone's manual if necessary. 3. When prompted on your cell phone’s display, confirm that the PIN provided by SYNC matches the PIN displayed on your cell phone. Skip the next step. If you are prompted to enter a PIN on your device, it does not support Secure Simple Pairing. To pair, enter the PIN displayed on the screen. The display indicates when the pairing is successful. 4. When the option to set the phone as primary appears, select either yes or no. 5. SYNC may prompt you with more cell phone options. Your cell phone may also prompt you to give SYNC permission to access information. For more information on your cell phone’s capability, see your cell phone’s manual and visit the website. Select the delete option and confirm when the system asks to delete the selected device. After deleting a phone from the list, you have to repeat the pairing process to pair it again. The system attempts to connect with the primary cellular phone each time you switch on the ignition. When you select a cellular phone as primary, it appears first in the list, marked with an asterisk. Set a previously paired phone as master by selecting the master option and confirming it as the primary. Connect a previously connected phone. You can only have one phone connected at a time to use the phone's func-