(cid:1) Do not use liquid sealants for a flat tire as tire pressure warning valve and transmitter will be damaged.
(cid:1) When the tires must be repaired or replaced, have them repaired or re- placed by the nearest Toyota dealer or an authorized tire dealer. The tire pressure warning valves and transmitters will be affected by the installation or removal of tires.
light)
As an added safety feature, your ve- hicle has been equipped with a tire pressure monitoring system (TPMS− tire pressure warning system) that il- luminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under−inflated. Accordingly, when the low tire pressure telltale (tire pres- sure warning illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a sig- nificantly under−inflated tire causes the tire to overheat and can lead to tire failure. Under−inflation also re- duces fuel efficiency and tire tread life, and may affect the vehicle’s han- dling and stopping ability. Please note that the TPMS (tire pres- sure warning system) is not a substi- tute for proper tire maintenance, and it to maintain correct tire pressure, even if under−inflation has not reached the level illumination of the TPMS low tire pressure telltale (tire pressure warning light).
the driver’s responsibility
trigger
to
is
192
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
CY16072
CY16071
Type A
Type B
IF THE TIRE PRESSURE WARNING LIGHT BLINKS... If the tire pressure warning light blinks when the ignition key is turned to the “ON” position, the tire pressure warn- ing system is not working properly. The system will be disabled in the follow- ing conditions: (When the condition becomes normal, the system will work properly.) (cid:1) If tires not equipped with tire pressure transmitters are
warning valves and used.
(cid:1) If tire chains are used. (cid:1) If the spare tire is in a location subject
to poor radio wave signal reception.
(cid:1) If
the tire inflation pressure is more than 500 kPa (5 kgf/cm2 or bar, 70 psi) or higher than the specified level.
“ON” position, have
If the tire pressure warning light continues to blink when the ignition key is turned to the the system checked by your Toyota dealer. Even if you use genuine wheels, the tire pressure warning system may not work properly with some types of tires.
(cid:1) If
the ID code on the
tire pressure warning valves and transmitters is not registered.
(cid:1) If electronic devices or facilities using frequencies are
radio wave
similar nearby.
(cid:1) If a radio set at similar frequencies is
in use in the vehicle.
(cid:1) If a window tint that affects the radio
wave signals is installed.
(cid:1) If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings.
(cid:1) If non−genuine Toyota wheels are used.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
193
06 06.07
For vehicles sold in U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause unde- sired operation.
interference
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer- ence television reception, which can be determined by turning the equipment off and on, the user is en- couraged to try to correct the interfer- ence by one or more of the following measures:
to radio or
(cid:1) Reorient or relocate the receiving an-
tenna.
(cid:1) Increase the separation between the
equipment and receiver.
(cid:1) Connect the equipment into an outlet to
on a circuit different which the receiver is connected.
from
that
(cid:1) Consult the dealer or an experienced
radio/TV technician for help.
FCC WARNING: Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the user’s authority to operate the equip- ment.
For vehicles sold in Canada
Operation is subject to the following two conditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference that may cause undesired operation of the device.
interference,
including
194
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
the
transmitters.
replacing a
ID codes on
REPLACING TIRES AND WHEELS
When replacing the tires and wheels, be
sure to install tire pressure warning valves
and
tire
pressure warning valves and transmitters
are registered in the tire pressure warning
ECU. When
tire pressure
warning valve and transmitter, it is neces-
sary to register the ID code of tire pres-
sure warning valve and transmitter. Have
the
ID code registered by your Toyota
dealer.
If the ID code is not registered, the sys-
tem will not work properly. After about 1
hour, the tire pressure warning light blinks
to indicate a system malfunction.
NOTICE
When the tires or tire pressure warn- ing valves and transmitters must be replaced, have them replaced by your Toyota dealer. The tire pressure warn- ing valves and transmitters will be affected by the installation or removal of tires.
Parking brake
CY16007
CAUTION
Before driving, be sure the parking brake is fully released and the park- ing brake reminder light is off.
When parking, firmly apply the parking brake to avoid inadvertent creeping. To set: Fully depress the parking brake pedal. For better holding power, first de- press the brake pedal and hold it while setting the parking brake. To release: Depress pedal once again. To remind you that the parking brake is set, the parking brake reminder light in the instrument panel remains on until you release the parking brake.
the parking brake
2007 4Runner from Aug. ’06 Prod. (OM35866U)
195
06 06.07
Cruise control The cruise control is designed to main- tain a set cruising speed without requir- ing the driver to operate the accelera- tor. Cruising speed can be set to any speed above 40 km/h (25 mph). Within the limits of the engine’s capabili- ties, cruising speed can be maintained up or down grades. However, changes in ve- hicle speed may occur on steeper grades.
CAUTION
(cid:1) To help maintain maximum control of your vehicle, do not use the cruise control when driving in heavy or varying traffic, or on slip- pery (rainy, icy or snow−covered) or winding roads.
If
(cid:1) Avoid vehicle speed increases when driving downhill. the vehicle speed is too fast in relation to the cruise control set speed, cancel the cruise control then downshift the transmission to use engine braking to slow down.
CAUTION
To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the “CRUISE” indicator light is off.
CY16058
TURNING THE SYSTEM ON AND OFF To turn the cruise control on, press the “ON−OFF” button. The “CRUISE” indicator light on the instrument panel will come on to indicate that the cruise control is opera- tional. Pressing “ON−OFF” button again turns the system off. When the system is turned off, cruising speed must be reset when the cruise con- trol is turned on again.
the
196
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
CY16059
SETTING THE CRUISING SPEED The transmission must be in “D” or “4” before you set the cruising speed. Bring your vehicle to the desired speed, push the lever down in the “− SET” direc- tion and release it. This sets the vehicle at that speed. If the speed is not satisfac- tory, tap the lever up for a faster speed, or tap it down for a slower speed. Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal.
If you need acceleration—for example, when passing—depress the accelerator pedal enough for the vehicle to exceed the set speed. When you release it, the vehicle will return to the speed set prior to the acceleration. CANCELLING THE CRUISE CONTROL The cruise control may be temporarily cancelled by the driver or by the system itself under certain circumstances. Tempo- rary cancellation allows the set cruising speed to remain in memory. The cruise control can be temporarily can- celled by doing the following: (cid:1) Pulling the lever in the “CANCEL” di-
rection and releasing it
(cid:1) Depressing the brake pedal Under certain circumstances, control is temporarily cancelled: (cid:1) When vehicle speed
the cruise
falls below 40
km/h (25 mph)
(cid:1) When vehicle stability control is acti-
vated
When vehicle speed drops 16 km/h (10
mph) below the set speed, the cruise con-
trol
the set speed is
erased from memory.
is cancelled and
sure
button. Make
The “CRUISE” indicator light remains on
to indicate that the system is still in op-
eration.
To turn the cruise control off, press the
“ON−OFF”
the
“CRUISE” indicator light is off.
If the cruise control automatically cancels
out other than for the above cases, have
your vehicle checked by your Toyota deal-
er at the earliest opportunity.
RESUMING THE CRUISE CONTROL
If the cruise control is temporarily can-
celled, the cruising speed can be resumed
by pushing the lever up in the “+ RES”
direction.
Vehicle speed must be above 40 km/h (25
mph).
RESETTING TO A FASTER SPEED
Push the lever up in the “+ RES” direction
and hold it. Release the lever when the
desired speed is attained. While the lever
is held up, the vehicle will gradually gain
speed.
However, a faster way to reset is to ac-
celerate
the vehicle and then push the
lever down in the “− SET” direction.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
197
06 06.07
RESETTING TO A SLOWER SPEED Push the lever down in the “− SET” direc- tion and hold it. Release the lever when the desired speed is attained. While the lever is held down, the vehicle speed will gradually decrease. However, a faster way to reset is to de- press the brake pedal and then push the lever down in the “− SET” direction. Even if you downshift from “D” to “4”, with the cruise control on, engine braking will not be enabled because the cruise control is not cancelled. To decrease the vehicle speed, reset to a slower speed with the cruise control lever or depress the brake pedal. If you use the brake pedal, cruise control is cancelled.
the
light
indicator
“CRUISE”
CRUISE CONTROL FAILURE WARNING If flashes when using the cruise control, press the “ON−OFF” button to turn the system off and then press it again to turn it on. If any of the following conditions then oc- curs, there is some trouble in the cruise control system. (cid:1) The indicator light does not come on. (cid:1) The indicator light flashes again. (cid:1) The
light goes out after
indicator
it
comes on.
If this is the case, contact your Toyota dealer and have your vehicle inspected.
198
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
SECTION 1− 8
OPERATION OF INSTRUMENTS AND CONTROLS Audio system Reference Using your audio system Audio remote controls AUX adapter Rear seat entertainment system Audio/video system operating hints
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
200
201
229
230
231
270
For vehicle equipped with Navigation system, please refer to the separate “Navigation System Owner’s Manual”.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
199
06 06.07
Reference
CY17067
CY17068
CY17074
Type 1: AM·FM radio/compact disc player (with compact disc changer controller)
Type 2: AM·FM radio/compact disc player with changer (with XM(cid:6) satellite radio* controller)
Type 3: AM·FM radio/compact disc player with changer (with XM(cid:6) satellite radio* controller)
* : Use of satellite radio requires XM(cid:6) tuner and service. Contact your Toyota deal- er for details.
* : Use of satellite radio requires XM(cid:6) tuner and service. Contact your Toyota deal- er for details.
200
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
Using your audio system— —Some basics This section describes some of the basic features on Toyota audio systems. Some information may not pertain to your sys- tem. Your audio system works when the ignition key is in the “ACC” or “ON” position. TURNING THE SYSTEM ON AND OFF Push “PWR·VOL” to turn the audio system on and off. Push “AM”, “FM1”, “FM2”, “FM”, “AM·SAT”* or “DISC·AUX” to turn on function without pushing “PWR·VOL”. You can turn on the compact disc player by inserting a compact disc. You can turn off the compact disc player by ejecting the compact disc. If the audio system was previously off, then the entire audio system will be turned off when you eject the compact disc. * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
that
SWITCHING BETWEEN FUNCTIONS Push “AM”, “FM1”, “FM2”, “FM”, “AM·SAT”* or “DISC·AUX” if the system is already on but you want to switch from one function to another. * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
LISTENING TO THE XM(cid:6) SATELLITE RADIO BROADCAST* (type 2 and 3) To listen to a satellite radio broadcast in your vehicle, an additional genuine Toyota satellite receiver and antenna (or equiva- lents) must be purchased and installed. A subscription to the XM(cid:6) satellite radio ser- vice is also necessary. How to subscribe to an XM(cid:6) satellite radio An XM(cid:6) satellite radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous states.
radio, visit XM(cid:6) on
How to subscribe: You must enter into a separate service agreement with the XM(cid:6) radio in order to receive satellite broadcast programming in the vehicle. Additional activation and ser- vice subscription fees apply that are not included in the purchase price of the ve- hicle and optional digital satellite tuner. For complete information on subscription rates and terms, or to subscribe to the XM(cid:6) the web at www.xmradio.com or call an XM(cid:6)’s Listen- er Care at (800) 967−2346. The XM(cid:6) radio is solely responsible for the quality, avail- ability and content of the satellite radio services provided, which are subject to the terms and conditions of the XM(cid:6) radio customer service agreement. Customers should have ID ready; the radio ID can be found by tun- ing to “channel 000” on the radio. For details, see “Displaying the radio ID” be- low. All fees and programming are the respon- sibility of the XM(cid:6) satellite radio and are subject to change.
radio
their
2007 4Runner from Aug. ’06 Prod. (OM35866U)
201
06 06.07
Satellite tuner technology notice: Toyota’s satellite radio tuners are awarded Type Approval Certificates from XM(cid:6) Sat- ellite Radio Inc. as proof of compatibility with the services offered by the XM(cid:6) sat- ellite radio. Displaying the radio ID Each XM(cid:6) tuner is identified with a unique radio ID. You will need the radio ID when activating XM(cid:6) service or when reporting a problem. If you select the “TUNE” knob, the ID code of 8 alphanu- meric characters appears. If you select another channel, display of the ID code is canceled. The channel (000) alternates the display between the radio ID and the spe- cific radio ID code. * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
“CH 000” using
radio
the
TONE AND BALANCE For details about your system’s tone and balance controls, see the description of your own system.
(cid:6)
symbol are
and SRS TruBass(cid:6)
SRS Type 1 and 2 audio systems utilize SRS FOCUS(cid:6) audio enhancement technologies, under license from SRS Labs, Inc., in all mode except AM radio mode. FOCUS, TruBass, SRS and trademarks of SRS Labs, Inc. FOCUS and TruBass incorporated under Labs, Inc. Tone How good an audio program sounds to you is largely determined by the mix of the treble, midrange and bass levels. In fact, different kinds of music and vocal programs usually sound better with differ- ent mixes of treble, midrange and bass.
technologies are from SRS
license
Balance A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the vol- ume of one group of sounds while de- creasing the volume of another. YOUR RADIO ANTENNA Your vehicle has an antenna printed on the inside of the rear quarter window.
NOTICE
Putting a film (especially a conductive or metallic film) on the rear quarter window will noticeably reduce the sensitivity of the radio.
202
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
YOUR COMPACT DISC PLAYER (type 1) When you insert a disc, gently push it in with the label side up. The compact disc player will play from track 1 through to the end of the disc. Then it will play from track 1 again. The player is intended for use with 12 cm (4.7 in.) discs only.
NOTICE
Never try to disassemble or oil any part of the compact disc player. Do not insert anything other than com- pact discs into the slot.
YOUR COMPACT DISC PLAYER WITH CHANGER (type 2 and 3) When you insert a disc, push the “LOAD” button and gently push the disc in with the label side up. This compact disc play- er can store up to six discs. The player will play from track 1 through to the end of the disc. Then it will play from track 1 of the next disc. The player is intended for use with 12 cm (4.7 in.) discs only.
CY17037
NOTICE
(cid:1) Do not stack up two discs for in- sertion, or it will cause damage to the compact disc player. Insert only one compact disc into slot at a time.
(cid:1) Never try to disassemble or oil any part of the compact disc player. Do not insert anything except a com- pact disc into the slot.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
203
06 06.07
—Controls and features
(cid:1)Type 1
CY17064y
Details of specific buttons, controls and features are described in the alphabetical list that follows.
204
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
to preset and
1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. (See “TUNE·FILE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset but- ton number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. These systems can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM”, “FM1” or “FM2” button.)
(Eject button)
the compact disc eject button
Push eject a compact disc.
to
(Reverse/Fast−forward button)
Push and hold “ ” (preset button 6) or “ ” (preset button 5) to fast−forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM Push the “AM” button to turn on the radio and select the AM band. “AM” will appear on the display. AUDIO CONT (Tone and sound balance controls) Each time you push the “AUDIO CONT” knob, the mode changes. To adjust the tone and balance, turn the knob. BAS: Adjusts low−pitched tones. The dis- play ranges from −5 to 5. TRE: Adjusts high−pitched tones. The dis- play ranges from −5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7.
the Speed Automatic
Switching over Sound Levelizer (ASL) level ASL: The Automatic Sound Levelizer can be turned on by turning the knob. In addi- tion, turning the knob allows you to select from LOW, MID, and HIGH volume and tone settings. The ASL system automati- cally adjusts volume and tone in accor- dance with the driving speed. This helps ensure an optimal listening experience even if noise levels rise while driving. DISC·AUX (Compact disc) Push compact disc. When the audio system is set to compact disc operation, the display shows the track number currently being played. Vehicles with AUX adapter— To switch between CD, DVD, and AUX (external the “DISC·AUX” button. The AUX mode is only available when AUX adapter is connected to the system. When the AUX adapter is in use, “AUX” will appear on the display.
the “DISC·AUX” button
device) modes,
to play a
press
2007 4Runner from Aug. ’06 Prod. (OM35866U)
205
06 06.07
inserted
incorrectly
Error messages If the player malfunctions, your audio sys- tem will display following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up−side down). Clean the disc and re−insert it. “NO DISC”: The compact disc changer of the separate unit is empty. Insert a disc. “ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over−current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of the separate unit is open. Close the compact disc changer lid. If “NO MUSIC” appears on the display, it indicates that a disc with no MP3/WMA data has been inserted. Remove the disc from the player and insert an MP3/WMA data disc. If the malfunction still exists, take your vehicle to your Toyota dealer.
in random order, or
PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random) Compact disc player There are two random features—you can either listen to the tracks on one compact to disc listen the tracks on all the compact discs in the magazine in random order. To play the tracks on one disc in random order: Quickly push and release “RAND” (preset ” will appear on the button 1). “ display and the tracks on the disc you are listening to in random order. To turn off the random fea- ture, push this button again.
the player will perform
(cid:2) DISC (cid:1)
With compact disc changer only—
Use these buttons to select a disc you
want to listen to.
Push “(cid:2)” (preset button 3) or “(cid:1)” (preset
button 4) until the number of the disc you
want to listen appears on the display.
FM1 FM2
Push the “FM1” or “FM2” button to turn on
the radio and select the FM band. “FM1”
or “FM2” will appear on the display. This
system allows you to set twelve FM sta-
tions, two for each of the preset button.
FOLDER (Folder up/down)
To skip up or down to a different folder:
Push either side of the “FOLDER” several
times until the number of the folder you
want to listen to appears on the display.
To jump to the first
file in the current
folder:
Push and hold the “(cid:2)” side of the button
until you hear a beep.
When playing a disc featuring both audio
data (CD−DA) and MP3/WMA files, audio
data (CD−DA) is played.
206
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
random
feature, push
With compact disc changer only— To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) ” will until you hear a beep. “ appear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the this button again. MP3/WMA player There are two random playback features— you can either listen to all of the files on the compact discs in random order. You can also listen to the files in a single folder in random order. To randomly play folder: Quickly push and release “RAND” (preset ” will appear on the button 1). “ display. To randomly play all of the files on the compact disc: Push and hold “RAND” (preset button 1) ” will until you hear a beep. “ appear on the display and the player will play all of the files on the disc in random order. To turn off the random playback feature, push this button again.
the files
in a
the
track
RPT (Repeat) Compact disc player There are two repeat features—you can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the track ends, it will automatically replay. To turn off the repeat feature, push this button again. With compact disc changer only— Repeating a disc: Push and hold “RPT” (preset button 2) ” will ap- until you hear a beep. “ pear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the first track on the disc and replay. To turn off the repeat feature, push this button again.
file
the
MP3/WMA player There are two repeat features—You can repeat a signal file or an entire folder. Repeating a file: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the file ends, it will repeat automatically. This process will be continued until you push the button again to turn off the re- peat feature. Repeating a folder: Push and hold “RPT” (preset button 2) ” will ap- until you hear a beep. “ pear on the display. The player will repeat all of the files in the folder. When the last file in the folder ends, the folder will re- peat from the beginning. To turn off the repeat feature, push this button again.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
207
06 06.07
SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again.
listening
Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release the “SCAN” but- ton. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning. With compact disc changer only— Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a ” will appear on the dis- beep. “ play and the first track on the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning.
the player will scan
to. To select a
MP3/WMA player There are two scan features—you can ei- ther scan the files in a folder on a specif- ic disc or scan the first file of all the folder. Scanning the files on a folder: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the files in the folder you are listening file, push the “SCAN” again. After all the tracks on the disc have been scanned in one pass, nor- mal play resumes. Scanning the first file of all the folders: “SCAN” until you hear a beep. Push ” will appear on the display and “ the player will scan the first file of the next folder. To select a folder, push the “SCAN” again. After all the folders have been scanned in one pass, normal play resumes.
208
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
up/
the seek mode,
(Seeking/Tracking
the radio finds and the next station up or down the
SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “(cid:1)” or “(cid:2)” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. MP3/WMA player To file up or down to a different file: Push either side of the “TRACK” several times until the file you want to listen to appears on the display. If you want to return to the beginning of the current file, push the “(cid:2)” side of the button one time, quickly.
To fast forward or reverse the disc: If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TEXT Compact disc player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time.
then back
track
title,
to
to
If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear. MP3/WMA player This button is used to change the display for the MP3/WMA file that contains text data. To change the display, quickly push and release the is playing. The display MP3/WMA changes the elapsed time to folder name to file name to album title to track title to artist name, then back to the elapsed time. If is pushed while an MP3/WMA file that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire text data is not displayed, push and hold it until you hear a beep. The rest of the text data will appear.
“TEXT” button while
in the order
this button
from
the
file
2007 4Runner from Aug. ’06 Prod. (OM35866U)
209
06 06.07
TUNE·FILE (Tuning and File up/down) Radio Turn the knob clockwise to step up the frequency. Turn the knob counterclockwise to step down the frequency. MP3/WMA player Turn the knob clockwise to file up. Turn the knob counterclockwise to file down.
210
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
(cid:1)Type 2
CY17077y
Details of specific buttons, controls and features are described in the alphabetical list that follows.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
211
06 06.07
to preset and
1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. (See “TUNE·FILE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset but- ton number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. These systems can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM·SAT”, “FM1” or “FM2” button.) XM(cid:6) satellite radio* — These buttons are used tune in radio channels. To preset a channel to a button: Tune in the desired channel. (See “TUNE·FILE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the channel to the button. The preset but- ton number will appear on the display.
to preset and
To recall a preset channel: Push the but- ton for the channel you want. The preset button number and channel number will appear on the display. This radio can store three XM(cid:6) channels for each button. (The display will show “SAT1”, “SAT2” or “SAT3” when you push “AM·SAT” button.) * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
(Eject button)
This button is used to eject one or all compact discs. To eject the current compact disc, push and release the compact disc eject button. To eject a specific disc, push “(cid:2)” (preset button 3) or “(cid:1)” (preset button 4) until the number of the disc you want to eject is displayed. Push and release the eject but- ton. To eject all discs at a time, press and hold the eject button until you hear a beep. The last compact disc played before pushing the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled.
(Reverse/Fast−forward button)
Push and hold “ ” (preset button 6) or “ ” (preset button 5) to fast−forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM·SAT (AM band and XM(cid:6) satellite ra- dio* ) Push the “AM·SAT” button to turn on the radio and select the AM or XM(cid:6) band. “AM”, “SAT1”, “SAT2” or “SAT3” will ap- pear on the display. Error messages If tuner malfunctions, your audio system will display following error messages. “ANTENNA”: (cid:3) The XM(cid:6) antenna
is not connected. Check whether the XM(cid:6) antenna cable is attached securely.
the satellite radio
(cid:3) A short−circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer.
212
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
“UPDATING”: (cid:3) You have not subscribed to the XM(cid:6) satellite radio. The radio is being up- dated with the latest encryption code. Contact the XM(cid:6) satellite radio for sub- scription information. When a contact is canceled, you can choose the “CH000” and all free−to−air channels.
(cid:3) The premium channel you selected is not authorized. Wait for about 2 sec- onds until the radio returns to the pre- vious channel or “CH001”. If it does not change automatically, select anoth- er channel. If you want to listen to the premium channel, contact the XM(cid:6) sat- ellite radio.
is
“NO SIGNAL”: The XM(cid:6) signal too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. “LOADING”: The unit is acquiring audio or program information. Wait until the unit has received the information. “OFF AIR”: The channel you selected is not broadcasting any programming. Select another channel.
to
the radio returns
“− − −”: The channel you selected is no longer available. Wait for about 2 seconds until the previous channel or “CH001”. If it does not change automatically, select another channel. The XM(cid:6) Listener Care Center is also available on the phone, please call (800) 967−2346 during the following hours: Monday—Saturday: 7 a.m.—1 a.m. Sunday: 12 p.m.—12 a.m. * : Use of satellite radio
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
AUDIO CONT (Tone and sound balance controls) Each time you push the “AUDIO CONT” knob, the mode changes. To adjust the tone and balance, turn the knob. BAS: Adjusts low−pitched tones. The dis- play ranges from −5 to 5. TRE: Adjusts high−pitched tones. The dis- play ranges from −5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7.
the Speed Automatic
Switching over Sound Levelizer (ASL) level ASL: The Automatic Sound Levelizer can be turned on by turning the knob. In addi- tion, turning the knob allows you to select from LOW, MID, and HIGH volume and tone settings. The ASL system automati- cally adjusts volume and tone in accor- dance with the driving speed. This helps ensure an optimal listening experience even if noise levels rise while driving. DISC·AUX (Compact disc) Push compact disc. When the audio system is set to compact disc operation, the track, or track and disc number currently being played. Vehicles with AUX adapter— To switch between CD, DVD, and AUX (external the “DISC·AUX” button. The AUX mode is only available when AUX adapter is connected to the system. When the AUX adapter is in use, “AUX” will appear on the display.
the “DISC·AUX” button
the display shows
device) modes,
to play a
press
2007 4Runner from Aug. ’06 Prod. (OM35866U)
213
06 06.07
inserted
incorrectly
Error messages If the player malfunctions, your audio sys- tem will display following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up−side down). Clean the disc and re−insert it. “NO DISC”: The compact disc changer of the separate unit is empty. Insert a disc. “ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over−current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of the separate unit is open. Close the compact disc changer lid. If “NO MUSIC” appears on the display, it indicates that a disc with no MP3/WMA data has been inserted. Remove the disc from the player and insert an MP3/WMA data disc. If the malfunction still exists, take your vehicle to your Toyota dealer.
(cid:2) DISC (cid:1)
Use these buttons to select a disc you
want to listen to.
Push “(cid:2)” (preset button 3) or “(cid:1)” (preset
button 4) until the number of the disc you
want to listen appears on the display.
FM1 FM2
Push the “FM1” or “FM2” button to turn on
the radio and select the FM band. “FM1”
or “FM2” will appear on the display. This
system allows you to set twelve FM sta-
tions, two for each of the preset button.
FOLDER (Folder up/down)
To skip up or down to a different folder:
Push either side of the “FOLDER” several
times until the number of the folder you
want to listen to appears on the display.
To jump to the first
file in the current
folder:
Push and hold the “(cid:2)” side of the button
until you hear a beep.
When playing a disc featuring both audio
data (CD−DA) and MP3/WMA files, audio
data (CD−DA) is played.
in
LOAD This button is used to load the compact discs the compact disc player. This player can store up to six discs. To load one compact disc only, quickly push and release the button, then insert a compact disc. After the disc is loaded, the shutter of the slot will close. If no compact disc is inserted, the shutter will close after 15 seconds. To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on), then insert the first compact disc. After the disc is loaded, the shutter of the slot will close. After a few seconds, the shutter will auto- matically open again so the next disc can be inserted. The same process can be applied for loading the rest of the discs. If the player is full of discs, “DISC FULL” will appear on the display. If no compact disc is inserted, the shutter will close after 15 seconds.
214
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
in random order, or
PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random) Compact disc player There are two random features—you can either listen to the tracks on one compact to disc listen the tracks on all the compact discs in the magazine in random order. To play the tracks on one disc in random order: Quickly push and release “RAND” (preset ” will appear on the button 1). “ display and the tracks on the disc you are listening to in random order. To turn off the random fea- ture, push this button again. To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) ” will until you hear a beep. “ appear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the this button again.
the player will perform
feature, push
random
in a
the files
MP3/WMA player There are two random playback features— you can either listen to all of the files on the compact discs in random order. You can also listen to the files in a single folder in random order. To randomly play folder: Quickly push and release “RAND” (preset ” will appear on the button 1). “ display. To randomly play all of the files on the compact disc: Push and hold “RAND” (preset button 1) ” will until you hear a beep. “ appear on the display and the player will play all of the files on the disc in random order. To turn off the random playback feature, push this button again.
the
track
RPT (Repeat) Compact disc player There are two repeat features—you can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the track ends, it will automatically replay. To turn off the repeat feature, push this button again. Repeating a disc: Push and hold “RPT” (preset button 2) ” will ap- until you hear a beep. “ pear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the first track on the disc and replay. To turn off the repeat feature, push this button again.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
215
06 06.07
file
the
MP3/WMA player There are two repeat features—You can repeat a signal file or an entire folder. Repeating a file: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the file ends, it will repeat automatically. This process will be continued until you push the button again to turn off the re- peat feature. Repeating a folder: Push and hold “RPT” (preset button 2) ” will ap- until you hear a beep. “ pear on the display. The player will repeat all of the files in the folder. When the last file in the folder ends, the folder will re- peat from the beginning. To turn off the repeat feature, push this button again.
SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again. XM(cid:6) satellite radio* — You can either scan the currently selected channel category or scan only the preset channels for that band.
the currently selected channel
To scan the preset channels: Push and hold the “SCAN” button until you hear a beep. “SCAN” appears on the display. The radio will tune in the next preset channel up the band, stay there for 5 seconds, and then move to the next preset channel. To stop scanning, push this button again. To scan category: Quickly push and release the “SCAN” but- ton. “SCAN” appears on the display. The radio will the same channel category up the band, stay there for 5 seconds, and then scan again. To stop scanning, push this button again. * : Use of satellite requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
the next channel
radio
find
in
216
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
listening
Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release the “SCAN” but- ton. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning. Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a ” will appear on the dis- beep. “ play and the first track on the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning.
the player will scan
to. To select a
MP3/WMA player There are two scan features—you can ei- ther scan the files in a folder on a specif- ic disc or scan the first file of all the folder. Scanning the files on a folder: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the files in the folder you are listening file, push the “SCAN” again. After all the tracks on the disc have been scanned in one pass, nor- mal play resumes. Scanning the first file of all the folders: “SCAN” until you hear a beep. Push ” will appear on the display and “ the player will scan the first file of the next folder. To select a folder, push the “SCAN” again. After all the folders have been scanned in one pass, normal play resumes.
up/
the seek mode,
(Seeking/Tracking
the radio finds and the next station up or down the
SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. XM(cid:6) satellite radio* — To select the next channel within the cur- rent channel category, push the “(cid:1)” or “(cid:2)” side of the “SEEK/TRACK” button. Repeat until a desired channel is found. * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
2007 4Runner from Aug. ’06 Prod. (OM35866U)
217
06 06.07
Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “(cid:1)” or “(cid:2)” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. MP3/WMA player To file up or down to a different file: Push either side of the “TRACK” several times until the file you want to listen to appears on the display. If you want to return to the beginning of the current file, push the “(cid:2)” side of the button one time, quickly. To fast forward or reverse the disc: If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing.
ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TEXT XM(cid:6) satellite radio* 1— When you push the “TEXT” button, the display changes as follows: CH NAME → TITLE (SONG/PROGRAM TITLE) → NAME (ARTIST NAME/FEA- TURE) → CH NUMBER → CH NAME Up to 10 alphanumeric characters can be displayed. (Some information will not be fully displayed.) The message display will be canceled if any button is pushed. If there is no song/program title or artist name/feature associated with the channel at that time, “− − − − −” will appear on the display.
that affects
the display
This XM(cid:6) tuner supports “Audio Services” (Music and Talk) of only XM(cid:6) satellite ra- dio and “Text Information”* 2 linked to the respective audio services. * 1: Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details. Information
includes, Channel Name, (Artist) Name, (Song) Title and Category Name.
* 2: Text
radio
to
Compact disc player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear.
then back
track
title,
to
218
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
file
the
in the order
“TEXT” button while
MP3/WMA player This button is used to change the display for the MP3/WMA file that contains text data. To change the display, quickly push and release the MP3/WMA is playing. The display changes the elapsed time to folder name to file name to album title to track title to artist name, then back to the elapsed time. If is pushed while an MP3/WMA file that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire text data is not displayed, push and hold it until you hear a beep. The rest of the text data will appear.
this button
from
TUNE·FILE (Tuning and File up/down) Radio Turn the knob clockwise to step up the frequency. Turn the knob counterclockwise to step down the frequency. XM(cid:6) satellite radio* — Turn the “TUNE·FILE” knob clockwise to step up the channel. Turn the knob coun- terclockwise to step down the channel. * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
MP3/WMA player Turn the knob clockwise to file up. Turn the knob counterclockwise to file down. TYPE XM(cid:6) satellite radio* — When you push the “(cid:2)” or “(cid:1)” side of the “TYPE” button while receiving a XM(cid:6) channel, the current channel category ap- pears on the display. When the channel category appears, push either “(cid:2)” or “(cid:1)” side of the “TYPE” but- ton to switch to the next or previous cate- gory. * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
2007 4Runner from Aug. ’06 Prod. (OM35866U)
219
06 06.07
(cid:1)Type 3
CY17066y
Details of specific buttons, controls and features are described in the alphabetical list that follows.
220
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
to preset and
1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. (See “TUNE·FILE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset but- ton number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. These systems can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM·SAT” or “FM” button.) XM(cid:6) satellite radio* — These buttons are used tune in radio channels. To preset a channel to a button: Tune in the desired channel. (See “TUNE·FILE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the channel to the button. The preset but- ton number will appear on the display.
to preset and
To recall a preset channel: Push the but- ton for the channel you want. The preset button number and channel number will appear on the display. This radio can store three XM(cid:6) channels for each button. (The display will show “SAT1”, “SAT2” or “SAT3” when you push “AM·SAT” button.) * : Use of satellite
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
radio
(Eject button)
This button is used to eject one or all compact discs. To eject the current compact disc, push and release the compact disc eject button. To eject a specific disc, push “(cid:2)” (preset button 3) or “(cid:1)” (preset button 4) until the number of the disc you want to eject is displayed. Push and release the eject but- ton. To eject all discs at a time, press and hold the eject button until you hear a beep. The last compact disc played before pushing the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled.
(Reverse/Fast−forward button)
Push and hold “ ” (preset button 6) or “ ” (preset button 5) to fast−forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM·SAT (AM band and XM(cid:6) satellite ra- dio* ) Push the “AM·SAT” button to turn on the radio and select the AM or XM(cid:6) band. “AM”, “SAT1”, “SAT2” or “SAT3” will ap- pear on the display. Error messages If tuner malfunctions, your audio system will display following error messages. “ANTENNA”: (cid:3) The XM(cid:6) antenna
is not connected. Check whether the XM(cid:6) antenna cable is attached securely.
the satellite radio
(cid:3) A short−circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer.
2007 4Runner from Aug. ’06 Prod. (OM35866U)
221
06 06.07
“UPDATING”: (cid:3) You have not subscribed to the XM(cid:6) satellite radio. The radio is being up- dated with the latest encryption code. Contact the XM(cid:6) satellite radio for sub- scription information. When a contact is canceled, you can choose the “CH000” and all free−to−air channels.
(cid:3) The premium channel you selected is not authorized. Wait for about 2 sec- onds until the radio returns to the pre- vious channel or “CH001”. If it does not change automatically, select anoth- er channel. If you want to listen to the premium channel, contact the XM(cid:6) sat- ellite radio.
is
“NO SIGNAL”: The XM(cid:6) signal too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. “LOADING”: The unit is acquiring audio or program information. Wait until the unit has received the information. “OFF AIR”: The channel you selected is not broadcasting any programming. Select another channel.
BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. Switching over the Automatic Sound Le- velizer (ASL) ON/OFF ASL: The Automatic Sound Levelizer can be turned on by turning the knob. The ASL system automatically adjusts volume and tone in accordance with ambient noise levels. This helps ensure an optimal lis- tening experience even when road, wind or other ambient noise levels rise. RSE: rear seat entertainment system—See “Rear seat entertainment system” on page 231 in this Section. DISC·AUX (Compact disc) Push compact disc. When the audio system is set to compact disc operation, the track, or track and disc number currently being played.
the “DISC·AUX” button
the display shows
Vehicles with
to play a
to
the radio returns
“− − −”: The channel you selected is no longer available. Wait for about 2 seconds until the previous channel or “CH001”. If it does not change automatically, select another channel. The XM(cid:6) Listener Care Center is also available on the phone, please call (800) 967−2346 during the following hours: Monday—Saturday: 7 a.m.—1 a.m. Sunday: 12 p.m.—12 a.m. * : Use of satellite radio
requires XM(cid:6) tuner and service. Contact your Toyota dealer for details.
the
you
time
push
AUDIO CONTROL (Tone and sound bal- ance controls) Each “AUDIO CONTROL” knob, the mode changes. To adjust the tone and balance or turn the rear seat entertainment system on/off, turn the knob. BAS: Adjusts low−pitched tones. The dis- play ranges from −5 to 5. MID: Adjusts mid−pitched tones. The dis- play ranges from −5 to 5. TRE: Adjusts high−pitched tones. The dis- play ranges from −5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7.
222
2007 4Runner from Aug. ’06 Prod. (OM35866U)
06 06.07
press
the DVD
device) modes,
player. Pressing
Vehicles with rear seat entertainment sys- tem— The “DISC·AUX” button may also be used to operate the DVD player when a disc is in the “DISC·AUX” button allows you to switch between the CD player and the DVD play- er. When the DVD player is in operation, “RSE DVD” appears on the display. Vehicles with AUX adapter— To switch between CD, DVD, and AUX (external the “DISC·AUX” button. The AUX mode is only available when AUX adapter is connected to the system. When the AUX adapter is in use, “AUX” will appear on the display. Error messages If the player malfunctions, your audio sys- tem will display following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up−side down). Clean the disc and re−insert it. “NO DISC”: The compact disc changer of the separate unit is empty. Insert a disc.
incorrectly
inserted
“ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over−current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of the separate unit is open. Close the compact disc changer lid. If “NO MUSIC” appears on the display, it indicates that a disc with no MP3/WMA data has been inserted. Remove the disc from the player and insert an MP3/WMA data disc. If the malfunction still exists, take your vehicle to your Toyota dealer. (cid:2) DISC (cid:1) Use these buttons to select a disc you want to listen to.