2014 Toyota Tacoma Owners Manual

If the file extensions .mp3, .wma and .m4a are used for files other than MP3, WMA and AAC files, they may be mistakenly recognized and played as MP3, WMA and AAC files. This may result in large amounts of interfer- ence and damage to the speakers.

276

3-2. Using the multimedia system

●Playback

• To play MP3 files with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• CD-R or CD-RW playback may not be possible in some instances,

depending on the characteristics of the disc.

• There is a wide variety of freeware and other encoding software for MP3, WMA and AAC files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be pos- sible at all.

• When files other than MP3, WMA or AAC files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S.A. and other countries.

• This system can playback AAC files encorded by iTunes.

277

3-2. Using the multimedia system

NOTICE

■Discs and adapters that cannot be used

Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function.

●Discs that have a diameter that is not 4.7 in. (12 cm). ●Low-quality or deformed discs. ●Discs with a transparent or translucent recording area. ●Discs that have tape, stickers or CD-R labels attached to them, or that

have had the label peeled off.

■Player precautions

Failure to follow the precautions below may result in damage to the discs or the player itself. ●Do not insert anything other than discs into the disc slot. ●Do not apply oil to the player. ●Store discs away from direct sunlight. ●Never try to disassemble any part of the player.

278

3-2. Using the multimedia system Listening to an iPod

Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the “Select Audio Source” screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.

Connecting an iPod

P. 259

Audio control screen

“Select Audio Source” screen appears Displays cover art Selecting the play mode Shuffle play Repeat play Pause Select back Setting the sound (P. 269)

to resume play-

Selecting a play mode

Select “Browse” on the “iPod” screen. Select the desired play mode by selecting the “Playlists”, “Art- ists”, “Albums”, “Songs”, “Podcasts”, “Audio books”, “Genres”, “Composers” or “Video”. Then select a song to begin using the selected play mode.

279

3-2. Using the multimedia system

■About iPod

●“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.

●Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.

●iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trade- marks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.

■iPod cover art

●Depending on the iPod and songs in the iPod, iPod cover art may be dis-

played.

●This function can be changed to on/off. (P. 262) ●It may take time to display iPod cover art, and the iPod may not be oper-

ated while the cover art display is in process.

●Only iPod cover art that is saved in JPEG format can be displayed.

280

3-2. Using the multimedia system

■iPod functions

●When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used.

●Depending on the iPod that is connected to the system, certain functions may not be available. If a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and recon- necting it may resolve the problem.

●While connected to the system, the iPod cannot be operated with its own controls. It is necessary to use the controls of the vehicle’s multimedia system instead.

●When the battery level of an iPod is very low, the iPod may not operate. If

so, charge the iPod before use.

●Compatible models (P. 283)

■iPod problems

To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner’s Manual.

281

3-2. Using the multimedia system

■Error messages

Message

Cause/Correction procedures

“Connection error. Please consult your Owner’s Manual for instructions on how to connect the iPod.”

“No music files found.”

“There are no songs available for playback. Please add compatible files to your iPod.”

“Please check the iPod firmware version.”

“iPod authorization unsuccessful.”

This indicates a problem in the iPod or its connection.

This indicates that there is no music data in the iPod.

This indicates that songs are not found in a selected playlist.

This indicates that the software version is not compatible. Please check the compatible models. (P. 283) This indicates that the display multimedia system failed to authorize the iPod. Please check your iPod.

282

3-2. Using the multimedia system

■Compatible models

The following iPod®, iPod nano®, iPod classic®, iPod touch® and iPhone® devices can be used with this system. ●Made for

• iPod touch (5th generation) • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (7th generation) • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 5
• iPhone 4S • iPhone 4
• iPhone 3GS • iPhone 3G • iPhone

Depending on differences between models or software versions etc., some models might be incompatible with this system.

CAUTION

■While driving

Do not connect an iPod or operate the controls.

283

3-2. Using the multimedia system

NOTICE

■To prevent damage to the iPod or its terminals

●Do not leave the iPod in the vehicle. The temperature inside the vehicle

may become high, resulting in damage to the iPod.

●Do not push down on or apply unnecessary pressure to the iPod while it is

connected.

●Do not insert foreign objects into the port.

284

3-2. Using the multimedia system Listening to a USB memory device

Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Select “USB” on the “Select Audio Source” screen.

Connecting a USB memory device

P. 259

Audio control screen

“Select Audio Source” screen appears Displaying the folder list (P. 267) Random playback Repeat play Pause Select back Setting the sound (P. 269)

to resume play-

285

3-2. Using the multimedia system

■USB memory functions

●Depending on the USB memory device that is connected to the system, the device itself may not be operable and certain functions may not be available. If the device is inoperable or a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and reconnecting it may resolve the problem.

●If the USB memory device still does not begin operation after being dis-

connected and reconnected, format the memory.

■Error messages for USB memory

Message

Cause/Correction procedures

“Connection error. Please consult your Owner’s Manual for instructions on how to connect the USB device.” “There are no file avail- able for playback. Please add compatible file to your USB device.”

■USB memory

●Compatible devices

This indicates a problem with the USB memory device or its connection.

This indicates that no MP3/WMA/AAC files are included on the USB memory device.

USB memory device that can be used for MP3, WMA and AAC playback.

●Compatible device formats

The following device format can be used: • USB communication format: USB2.0 FS (12 Mbps), USB2.0 HS (480

Mbps)

• File system format: FAT16/32 (Windows) • Correspondence class: Mass storage class

MP3, WMA and AAC files written to a device with any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

286

3-2. Using the multimedia system

Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folders in a device: 3000 (including the root) • Maximum number of files in a device: 9999
• Maximum number of files per folder: 255

●MP3, WMA and AAC files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format. AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG2 and MPEG4. MP3, WMA and AAC file and media/formats compatibility are limited. ●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 AUDIO LAYER3, MPEG2 AUDIO LAYER3)

• Compatible sampling frequencies

MPEG1 AUDIO LAYER3: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYER3: 16, 22.05, 24 (kHz)

• Compatible bit rates (compatible with VBR)

MPEG1 AUDIO LAYER3: 32-320 (kbps) MPEG2 AUDIO LAYER3: 8-160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)

• Compatible bit rates

HIGH PROFILE 48-320 (kbps, VBR)

287

3-2. Using the multimedia system

●AAC file compatibility

• Compatible standards

MPEG4/AAC-LC

• Compatible sampling frequencies

11.025/12/16/22.05/24/32/44.1/48 (kHz)

• Compatible bit rates

16-320 (kbps)

• Compatible channel modes: 1 ch and 2 ch

●File names

The only files that can be recognized as MP3/WMA/AAC and played are those with the extension .mp3 or .wma.

●ID3, WMA and AAC tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags. AAC tags can be added to AAC files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3, WMA and AAC playback

• When a device containing MP3, WMA and AAC files is connected, all files in the USB memory device are checked. Once the file check is fin- ished, the first MP3, WMA and AAC file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3, WMA and AAC files or create any unnecessary folders.

• When a USB memory device is connected and the audio source is changed to USB memory mode, the USB memory device will start playing the first file in the first folder. If the same device is removed and reconnected (and the contents have not been changed), the USB memory device will resume play from the same point in which it was last used. ●Extensions

If the file extensions .mp3, .wma and .m4a are used for files other than MP3, WMA and AAC files, they will be skipped (not played).

288

3-2. Using the multimedia system

●Playback

• To play MP3 files with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• There is a wide variety of freeware and other encoding software for MP3, WMA and AAC files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be pos- sible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S.A. and other countries.

CAUTION

■While driving

Do not connect a USB memory device or operate the device controls.

NOTICE

■To prevent damage to the USB memory device or its terminals

●Do not leave the USB memory device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the USB memory device.

●Do not push down on or apply unnecessary pressure to the USB memory

device while it is connected.

●Do not insert foreign objects into the port.

289

3-2. Using the multimedia system Using the AUX port

To use the AUX port, connect a portable player, then select “AUX” on the “Select Audio Source” screen.

Connecting a portable audio player

P. 259

■Operating portable audio players connected to the multimedia system The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio player itself.

■When using a portable audio player connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio player.

CAUTION

■While driving

Do not connect a portable audio player or operate the device controls.

290

3-2. Using the multimedia system Connecting Bluetooth®

The following can be performed using Bluetooth® wireless commu- nication: ■ A portable audio player can be operated and listened to via

multimedia system

■ Hands-free phone calls can be made via a cellular phone In order to use wireless communication, register and connect a Bluetooth® device by performing the following procedures.

291

3-2. Using the multimedia system

Device registration/connection flow

1. Register the Bluetooth® device to be used with Multimedia

system (P. 294, 295)

2. Connect the Bluetooth® device to be used

(P. 297)

To be used for audio

To be used for hands-free phone

3. Start Bluetooth®

connection (P. 297)

3. Start Bluetooth®

connection (P. 297)

4. Check connection status

4. Check connection status

(P. 313)

(P. 315)

5. Use Bluetooth® audio

5. Use Bluetooth® phone

(P. 313)

(P. 314)

292

3-2. Using the multimedia system

Registering and connecting from the “Bluetooth Setup” screen

To display the screen shown below, press the “SETUP” button and select “Bluetooth” on the “Setup” screen.

Select to connect the device to be used with multimedia sys- tem. (P. 297) Select to register a Bluetooth® device to be used with multi- media system. (P. 295) Select detailed Bluetooth® system settings. (P. 300) Select devices. (P. 296)

to delete registered

set

to

293

3-2. Using the multimedia system

Registering a Bluetooth® audio player for the first time To use the Bluetooth® Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the Bluetooth® Audio. This operation cannot be performed while driving. For details about registering a Bluetooth® device (P. 295)

Turn the Bluetooth® connection setting of your audio player on. This function is not available when the Bluetooth® connection setting of your audio player is set to off. Press the “AUDIO” button. Select “ Select “Select Device”. Follow the steps in “How to register a Bluetooth® device” from “STEP 2”. (P. 295)

Audio” on the “Select Audio Source” screen.

Registering a Bluetooth® phone for the first time To use the hands-free system, it is necessary to register a Bluetooth® phone with the system. Once the phone has been registered, it is possible to use the hands- free system. For details about registering a Bluetooth® device (P. 295)

Turn the Bluetooth® connection setting of your cellular phone on. Press the Select “OK” to register a phone. Follow the steps in “How to register a Bluetooth® device” from “STEP 2”. (P. 295)

button.

294

3-2. Using the multimedia system

Registering a Bluetooth® device Bluetooth® compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5
Bluetooth® devices. ■ How to register a Bluetooth® device

Display the “Bluetooth Setup” screen. (P. 293) Select “Add”.

When this screen is displayed, search for the device name dis- played on this screen on the your Bluetooth® screen of device.

For details about operating the Bluetooth® device, see the man- ual that comes with it. To cancel the registration, select “Cancel”.

Register the Bluetooth® device using your Bluetooth® device. A PIN-code is not required for SSP (Secure Simple Pairing) compat- ible Bluetooth® devices. Depending on the type of Bluetooth® device being connected, a message confirming registration may be dis- played on the Bluetooth® device’s screen. Respond and operate the Bluetooth® device according to the confirmation message.

Check that this screen is dis- played when registration is com- plete.

295

3-2. Using the multimedia system

Select “OK” when the connection status changes from “Con- necting...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again.

Registration can be performed “Bluetooth Setup” screen. ■ When registering from the “Bluetooth Audio” screen

from screens other

than

the

Display the “Bluetooth Audio” screen. (P. 266) Select “Select Device”. Follow the steps in “How to register a Bluetooth® device” from “STEP 2”. (P. 295)

■ Deleting a Bluetooth® device

Display the “Bluetooth Setup” screen. (P. 293) Select “Remove”. Select the desired device. A confirmation message will be displayed, select “Yes” to delete the device. Check that a confirmation screen is displayed when the oper- ation is complete.

296

3-2. Using the multimedia system

Connecting a Bluetooth® device Up to 5 Bluetooth® devices (Phones (HFP) and audio players (AVP)) can be registered. If more than 1 Bluetooth® device has been registered, select which device to connect to.

Press the “SETUP” button. Select “Bluetooth” on the “Setup” screen.

Select the device to be con- nected.

Supported profile icons will be displayed. Phone Audio player

Supported profile icons for cur- rently connected devices will illu- minate. Dimmed icons can be selected to connect to the function directly.

■ Auto connection

To turn auto connection mode on, set “Bluetooth Power” to on. (P. 300) When you register a phone, auto connection will be activated. Always set it to this mode and leave the Bluetooth® phone in a place where a connection can be established. When the engine switch is turned to the “ACC” or “ON” position, the sys- tem will search for a nearby cellular phone you have registered. Next, the system automatically connects with the most recent of the phones connected to in the past. Then, the connection result is dis- played.

297

3-2. Using the multimedia system

■ Manual connection

When auto connection has failed or “Bluetooth Power” is turned off, you must connect the Bluetooth® device manually. Follow the steps in “Connecting a Bluetooth® device” from “STEP 1”. (P. 297)

■ Connecting a Bluetooth® audio player

Registering an additional device

Select “Select Device” on the “Bluetooth Audio” screen. For more information: P. 295

Selecting a registered device

Select “Select Device” on the “Bluetooth Audio” screen. For more information: P. 297

■Reconnecting a Bluetooth® phone

If the system cannot connect due to poor signal strength with the engine switch in the “ACC” or “ON” position, the system will automatically attempt to reconnect. If the phone is turned off, the system will not attempt to reconnect. In this case, the connection must be made manually, or the phone must be rese- lected.

298

3-2. Using the multimedia system

Displaying a Bluetooth® device details

You can confirm and change the registered device details. ■ Bluetooth® device registration status

Display the “Bluetooth Setup” screen. (P. 293) Select the device. Select “Device Info”. Following screen is displayed:

Device name Change connection method (P. 299) Bluetooth® address Display your telephone num- ber The number may not be dis- played depending on the model of phone. Compatibility profile of device Restore default settings

the

■ Changing connection method

Select “Connect Audio Player from”. Select “Vehicle” or “Device”. “Vehicle”: Connect the multimedia system to the portable audio

player.

“Device”: Connect the portable audio player to the multimedia

system.

299

3-2. Using the multimedia system

Detailed Bluetooth® system settings You can confirm and change the detailed Bluetooth® settings. ■ How to check and change detailed Bluetooth® settings

Display the “Bluetooth Setup” screen. (P. 293) Select “System Settings”. The following screen is displayed:

Bluetooth® power on/off You can change Bluetooth® func- tion on/off Bluetooth® name Change PIN-code (P. 300) Bluetooth® address Display phone status You can set the system to show the status confirmation display when connecting a telephone Display audio player status You can set the system to show the status confirmation display when connecting an audio player Compatibility profile of the sys- tem Restore default settings

■ Editing the Bluetooth® PIN

You can change the PIN-code that is used to register your Bluetooth® devices in the system.

Select “Bluetooth® PIN”. Input a PIN-code, and select “OK”.

300

3-2. Using the multimedia system

What to do if... (Troubleshooting)

If there is a problem with the hands-free system or a Bluetooth® device, first check the table below.

When using the hands-free system with a Bluetooth® device

Symptom

Likely cause

Solution

The hands-free system or Blue- tooth® device does not work.

The connected device may not be a compatible Bluetooth® cellular phone.

The Bluetooth® version of the connected cellular phone may be older than the specified version.

For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.toyota.com/ bluetooth Use a cellular phone with Bluetooth® version 2.0 or higher (recommended: Ver. 3.0 with EDR or higher). (P. 306)

301

3-2. Using the multimedia system

When registering/connecting a cellular phone

Symptom

Likely cause

Solution

An incorrect passcode was entered on the cellu- lar phone.

The registration opera- tion has not been com- pleted on the cellular phone side.

Old registration informa- tion remains on either this system or the cellular phone.

Another Bluetooth® device is already con- nected.

Bluetooth® function is not enabled on the cellular phone. Bluetooth® function is not enabled on the cellular phone.

Old registration informa- tion remains on either this system or the cellular phone.

Enter the correct pass- code on the cellular phone. Complete the registra- tion operation on the cel- lular phone (approve registration on the phone). Delete the existing regis- tration information from both this system and the cellular phone, then reg- ister the cellular phone you wish to connect to this system. (P. 296) Manually connect the cel- lular phone you wish to use to this system. (P. 298) Enable the Bluetooth® function on the cellular phone. Enable the Bluetooth® function on the cellular phone. Delete the existing regis- tration information from both this system and the cellular phone, then reg- ister the cellular phone you wish to connect to this system. (P. 296)

A cellular phone cannot be regis- tered.

A Bluetooth® connection can- not be made.

“Please check your device set- tings.” message is displayed.

302

3-2. Using the multimedia system

When making/receiving a call

Symptom

Likely cause

Solution

A call cannot be made/received.

Your vehicle is in a out of cellular service area.

Move to where “Out of cellular service area. Please try again later.” no longer appears on the display.

When using the contacts

Symptom

Likely cause

Solution

Contact data cannot be trans- ferred manually/ automatically.

The profile version of the connected cellular phone may not be compatible with transferring contact data.

Automatic contact trans- fer function on this sys- tem is set to off.

Passcode has not been entered on the cellular phone.

Transfer operation on the cellular phone has not completed.

Contact data cannot be edited.

Automatic contact trans- fer function on this sys- tem is set to on.

For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.toyota.com/ bluetooth Set automatic contact transfer function on this system to on. (P. 331) Enter the passcode on the cellular phone if requested (default pass- code: 1234). Complete transfer opera- tion on the cellular phone (approve transfer opera- tion on the phone). Set automatic contact transfer function on this system to off. (P. 331)

303

3-2. Using the multimedia system

When using the Bluetooth® message function

Symptom

Likely cause

Solution

Messages can- not be viewed.

New message notifications are not displayed.

Message transfer is not enabled on the cellular phone.

Automatic transfer func- tion on this system is set to off.

Notification of SMS/ MMS/E-mail reception on this system is set to off.

Automatic message transfer function is not enabled on the cellular phone.

Enable message trans- fer on the cellular phone (approve message trans- fer on the phone). Set automatic transfer function on this system to on. (P. 338) Set notification of SMS/ MMS/E-mail reception on this system to on. (P. 338)

Enable automatic trans- fer function on the cellu- lar phone.

304

3-2. Using the multimedia system

In other situations

Symptom

Likely cause

Solution

The cellular phone is not close enough to this sys- tem.

Even though all conceivable measures have been taken, the symptom status does not change.

The cellular phone is the most likely cause of the symptom.

Bring the cellular phone closer to this system.

• Turn the cellular phone off, remove and reinstall the battery pack, and then restart the cellular phone. • Enable the cellular phone’s Bluetooth® con- nection. • Stop the cellular phone’s security software and close all applications. • Before using an applica- tion installed on the cellu- lar phone, carefully check its source and how its operation might affect this system.

305

3-2. Using the multimedia system

Bluetooth®

■About Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

■When using the Bluetooth® audio system

●In the following conditions, the system may not function.

• If the portable audio player is turned off • If the portable audio player is not connected • If the portable audio player’s battery is low

●There may be a delay if a cellular phone connection is made during

Bluetooth® audio play.

●Depending on the type of portable audio player that is connected to the system, operation may differ slightly and certain functions may not be available.

■When using the hands-free system

●The multimedia system is muted when making a call. ●If both parties speak at the same time, it may be difficult to hear. ●If the received call volume is overly loud, an echo may be heard.

If the Bluetooth® phone is too close to the system, quality of the sound may deteriorate and connection status may deteriorate.

●In the following circumstances, it may be difficult to hear the other party:

• When driving on unpaved roads • When driving at high speeds • If a window is open • If the air conditioning is blowing directly on the microphone • If there is interference from the network of the cellular phone

306

3-2. Using the multimedia system

■Conditions under which the system will not operate

●If using a cellular phone that does not support Bluetooth® ●If the cellular phone is turned off ●If you are outside of cellular phone service coverage ●If the cellular phone is not connected ●If the cellular phone’s battery is low ●When outgoing calls are controlled, due to heavy traffic on telephone

lines, etc.

●When the cellular phone itself cannot be used ●When transferring contact data from the cellular phone

■Bluetooth® antenna

The antenna is built into the display. If the portable audio player is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deteriorate. If the cellular phone is behind the seat or in the console box, or touching or covered by metal objects, the connection status may deteriorate.

■Battery charge/signal status

●This display may not correspond exactly with the portable audio player or

cellular phone itself.

●This system does not have a charging function. ●The portable audio player or cellular phone battery will be depleted

quickly when the device is connected to Bluetooth®.

■When using the Bluetooth® audio and hands-free system at the same

time The following problems may occur. ●The Bluetooth® audio connection may be interrupted. ●Noise may be heard during Bluetooth® audio playback.

307

3-2. Using the multimedia system

■About the contact in this system

The following data is stored for every registered cellular phone. When another phone is connecting, you cannot read the registered data. ●Contact data ●Call history ●Favorite ●Message When removing a Bluetooth® phone from the system, the above-mentioned data is also deleted. ■Compatible models

The Bluetooth® audio system supports portable audio players with the fol- lowing specifications ●Bluetooth® specifications:

Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher)

●Profiles:

• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher

(Recommended: Ver. 1.2 or higher) This is a profile to transmit stereo audio or high quality sound to the multimedia system.

• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher

(Recommended: Ver. 1.4 or higher) This is a profile to allow remote control the A/V equipment.

However, please note that some functions may be limited depending on the type of portable audio player connected. The hands-free system supports cellular phones with the following specifica- tions.

• Bluetooth® specification:

Ver. 2.0 or higher (Recommended: Ver. 3.0+EDR or higher)

308

3-2. Using the multimedia system

●Profiles:

• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.6

or higher) This is a profile to allow hands-free phone calls using a cellular phone or head set. It has outgoing and incoming call functions.

• OPP (Object Push Profile) Ver. 1.1 or higher (Recommended: Ver. 1.2) This is a profile to transfer contact data. When a Bluetooth® compatible cellular phone has both PBAP and OPP, OPP cannot be used.

• PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Recommended:

Ver. 1.1) This is a profile to transfer contact data.

If the cellular phone does not support HFP, you cannot register it with the hands-free system. OPP, PBAP services must be selected individually.

■Certifications for the Bluetooth®

For vehicles sold in U.S.A. FCC ID: ACJ932YEAP01A446
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For vehicles sold in Canada

IC: 216J-YEAP01A446
This device complies with Industry Canada licence-exempt RSS stan- dard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interfer- ence, including interference that may cause undesired operation of the device. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

309

3-2. Using the multimedia system

The latest original “DECLARATION of CONFORMITY” (DoC) is available at the address stated.

http://www.ptc.panasonic.de/

310

3-2. Using the multimedia system

■Reconnecting the portable audio player

If the portable audio player is disconnected due to poor reception when the engine switch is in the “ACC” or “ON” position, the system automatically reconnects the portable audio player. If you have switched off the portable audio player yourself, follow the instruc- tions below to reconnect: ●Select the portable audio player again ●Enter the portable audio player

■When you sell your car

Be sure to delete your personal data. (P. 262)

CAUTION

■FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 7.9 in. (20 cm) between the radiator and your body. This transmitter must not be co-located operating in conjuction with any other antenna or transmitter.

■While driving

Do not use the portable audio player, cellular phone or connect a device to the Bluetooth® system.

311

3-2. Using the multimedia system

CAUTION

■Caution regarding interference with electronic devices

●Your audio unit is fitted with Bluetooth® antennas. People with implanted pacemakers or cardiac defibrillators should maintain a reasonable dis- tance between themselves and the Bluetooth® antennas. The radio waves may affect the operation of such devices.

●Before using Bluetooth® devices, users of any electrical medical device other than implanted pacemakers and implanted cardiac defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

NOTICE

■When leaving the vehicle

Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.

312

3-2. Using the multimedia system Listening to Bluetooth® audio

The Bluetooth® audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wireless communication. Select “ When a Bluetooth® device cannot be connected, check the con- nection status on the “Bluetooth Audio” screen. If the device is not connected, either register or reconnect the device. (P. 297)

Audio” on the “Select Audio Source” screen.

Audio control screen

Some titles and controls may not be displayed depending on the type of portable audio player used.

to display

Connection status Battery charge “Select Audio Source” screen appears Selecting a Bluetooth® device Select the play mode selection screen Random playback Repeat play Pause Select Setting the sound (P. 269)

to resume play

Indicators

Connection status

Battery charge

Good

Full

Conditions

Not connected

Empty

313

3-2. Using the multimedia system Using a Bluetooth® phone

The hands-free system is a function that allows you to use your cel- lular phone without touching it. This system supports Bluetooth®. Bluetooth® is a wireless data sys- tem that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls. Before making a phone call, check the connection status, battery charge, call area and signal strength. (P. 315) If a Bluetooth® device cannot be connected, check the connection status on the phone screen. If the device is not connected, either register or reconnect it. (P. 297)

Phone screen

To display the screen shown below, press the steering wheel or press the Several functions are available to operate on each screen that is dis- played by selecting the 4 tabs.

switch on the

button.

Device name Bluetooth® connection status

314

■ Microphone

3-2. Using the multimedia system

The vehicle’s built in microphone is used when talking on the phone. The person you are speaking to can be heard from the front speakers.

To use the hands-free system, you must register your Bluetooth® phone in the system. (P. 295)

Status display

You can check indicators such as signal strength and battery charge on any screen.

Connection status Signal strength Battery charge

Indicators

Connection status

Battery charge

Call area

Signal strength

Conditions

Good (Blue)

Not connected

Full

“Rm”: Roaming area Excellent

Empty

Poor

315

3-2. Using the multimedia system

Making a call

Once a Bluetooth® phone is registered, you can make a call using the following procedure: ■ Dialing

Display the phone screen. (P. 314) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+” by selecting “” for a while. Press the

switch on the steering wheel or select

■ Dialing from the contacts list

You can dial a number from the contact data imported from your cellular phone. The system has one contact for each registered phone. Up to 2500 contacts may be stored in each contact. (P. 317)

Display the phone screen. (P. 314) Select “Contacts” tab. Choose the desired contact to call from the list. Choose the number and then press the steering wheel or select

switch on the

316

3-2. Using the multimedia system

■ When the contact is empty

You can transfer the phone numbers in a Bluetooth® phone to the system. Operation methods differ between PBAP (Phone Book Access Profile) compatible and PBAP incompatible Bluetooth® phones. If the cellular phone does not support either PBAP or OPP (Object Push Profile) service, you cannot transfer contacts.

● For PBAP compatible Bluetooth® phones

When “Automatic Contact/History Transfer” is set to on (P. 331)

Select the “Contacts” tab. Check that a confirmation screen is displayed when the oper- ation is complete. Transfer the contact data to the system using a Bluetooth® phone.

When “Automatic Contact/History Transfer” is set to off

Select the “Contacts” tab. Select the desired item.

“Always” and

Select to transfer new con- tacts from a cellular phone, select then enable “Automatic Transfer”. Select to transfer all the con- tacts from a connected cellular phone only once. Select to cancel transferring.

Check that a confirmation screen is displayed when the oper- ation is complete.

317

3-2. Using the multimedia system

● For PBAP incompatible but OPP compatible Bluetooth® phones

Select the “Contacts” tab. Follow the steps in “Update contacts from phone” from “STEP 2”. (P. 332)

■ Calling using favorites list

You can make a call using numbers registered in the contact.

Display the phone screen. (P. 314) Select “Favorites” tab. Select the desired number to make a call.

318

3-2. Using the multimedia system

■ Dialing from call history

You can make a call using the call history, which has the 3 func- tions below.

: calls which you missed : calls which you received : calls which you made

Display the phone screen. (P. 314) Select “Call History” tab. Select

or the desired entry from the list.

When

is selected

Check that the “Call” screen is displayed.

When the desired contact is selected

Select the desired number. Check that the “Call” screen is displayed.

■Call history list