2014 Toyota Avalon Owners Manual

Washer fluid If any washer does not work or the warning message appears on the multi-information the washer tank may be empty. Add washer fluid.

display,

CAUTION

■When adding washer fluid

Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine etc.

NOTICE

■Do not use any fluid other than washer fluid

Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces.

■Diluting washer fluid

Dilute washer fluid with water as necessary. Refer to the freezing temperatures listed on the label of the washer fluid bot- tle.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

334
Tires

Replace or rotate tires in accordance with maintenance sched- ules and treadwear.

Checking tires

New tread Treadwear indicator Worn tread The location of treadwear indica- tors is shown by the “TWI” or “” marks, etc., molded on the side- wall of each tire. Check spare tire condition and pressure if not rotated.

Tire rotation

Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection.

Front

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

335

Tire pressure warning system Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire infla- tion pressure before serious problems arise. (P. 390) ◆ Installing tire pressure warning valves and transmitters

When replacing tires or wheels, tire pressure warning valves and transmitters must also be installed. When new tire pressure warning valves and transmitters are installed, new ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (P. 337)

◆ Initializing the tire pressure warning system ■ The tire pressure warning system must be initialized in the fol-

lowing circumstances: ● When changing the tire size. ● When the tire inflation pressure is changed such as when chang-

ing traveling speed or load weight.

When the tire pressure warning system is initialized, the current tire inflation pressure is set as the benchmark pressure.

AVALON (U)_(OM41452U)

336

6-3. Do-it-yourself maintenance

■ How to initialize the tire pressure warning system

Park the vehicle in a safe place and turn the engine switch off. Initialization cannot be performed while the vehicle is moving. Adjust the tire inflation pressure to the specified cold tire inflation pressure level. (P. 435) Make sure to adjust the tire pressure to the specified cold tire infla- tion pressure level. The tire pressure warning system will operate based on this pressure level. Turn the engine switch to IGNITION ON mode. Press and hold the tire pres- sure warning reset switch until the tire pressure warn- ing light blinks slowly 3 times.

Wait for a few minutes with the engine switch in IGNITION ON mode and then turn the engine switch off.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

337

◆ Registering ID codes

The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer.

■When to replace your vehicle’s tires

Tires should be replaced if: ●You have tire damage such as cuts, splits, cracks deep enough to

expose the fabric, and bulges indicating internal damage

●A tire goes flat repeatedly or cannot be properly repaired due to the size

or location of a cut or other damage

If you are not sure, consult with your Toyota dealer.

■Replacing tires and wheels

If the ID code of the tire pressure warning valve and transmitter is not reg- istered, the tire pressure warning system will not work properly. After driv- ing for about 20 minutes, the tire pressure warning light blinks for 1
minute and stays on to indicate a system malfunction.

■Tire life

Any tire over 6 years old must be checked by a qualified technician even if it has seldom or never been used or damage is not obvious.

■Routine tire inflation pressure checks

The tire pressure warning system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks.

AVALON (U)_(OM41452U)

338

6-3. Do-it-yourself maintenance

■Low profile tires (18-inch tires)

Generally, low profile tires will wear more rapidly and tire grip perfor- mance will be reduced on snowy and/or icy roads when compared to standard tires. Be sure to use snow tires or tire chains on snowy and/or icy roads and drive carefully at a speed appropriate for road and weather conditions.

■Maximum load of tire

Check that the maximum load of the replacement tire is greater than 1/2
of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Label. For the maximum load of the tire, see the load limit at maximum cold tire inflation pressure mentioned on the sidewall of the tire. (P. 440)

■Tire types

●Summer tires

Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads. For driving on snow-covered roads or icy roads, the use of snow tires is recommended. When install- ing snow tires, be sure to replace all four tires.

●All season tires

All season tires are designed to provide better traction in snow and to be adequate for driving in most winter conditions as well as for use year-round. All season tires, however, do not have adequate traction performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in acceleration and handling performance com- pared with summer tires in highway driving.

●Snow tires

For driving on snow-covered roads or icy roads, we recommend using snow tires. If you need snow tires, select tires of the same size, con- struction and load capacity as the originally installed tires. Since your vehicle has radial tires as original equipment, make sure your snow tires also have radial construction. Do not install studded tires without first checking local regulations for possible restrictions. Snow tires should be installed on all wheels. (P. 232)

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

339

■Initializing the tire pressure warning system

Initialize the system with the tire inflation pressure adjusted to the speci- fied level.

■If the tread on snow tires wears down below 0.16 in. (4 mm)

The effectiveness of the tires as snow tires is lost.

■If you press the tire pressure warning reset switch accidentally

If initialization is performed, adjust the tire inflation pressure to the speci- fied level and initialize the tire pressure warning system again.

■When initialization of the tire pressure warning system has failed

Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not oper- ate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●When operating the tire pressure warning reset switch, the tire pressure

warning light does not blink 3 times.

●After driving for a certain period of time since the initialization has been

completed, the warning light comes on after blinking for 1 minute.

■Tire pressure warning system certification

FCC ID: PAXPMVC010
 For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equip- ment.  For vehicles sold in Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

AVALON (U)_(OM41452U)

340

6-3. Do-it-yourself maintenance

CAUTION

■When inspecting or replacing tires

Observe the following precautions to prevent accidents. Failure to do so may cause damage to parts of the drive train as well as dangerous handling characteristics, which may lead to an accident resulting in death or serious injury. ●Do not mix tires of different makes, models or tread patterns.

Also, do not mix tires of remarkably different treadwear.

●Do not use tire sizes other than those recommended by Toyota. ●Do not mix differently constructed tires (radial, bias-belted or bias-ply

tires).

●Do not mix summer, all season and snow tires. ●Do not use tires that have been used on another vehicle.

Do not use tires if you do not know how they were used previously.

■When initializing the tire pressure warning system

Do not operate the tire pressure warning reset switch without first adjusting the tire inflation pressure to the specified level. Otherwise, the tire pressure warning light may not come on even if the tire inflation pressure is low, or it may come on when the tire inflation pressure is actually normal.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

341

NOTICE

■Repairing or replacing tires, wheels, tire pressure warning valves,

transmitters and tire valve caps ●When removing or fitting the wheels, tires or the tire pressure warning valves and transmitters, contact your Toyota dealer as the tire pres- sure warning valves and transmitters may be damaged if not handled correctly.

●When replacing tire valve caps, do not use tire valve caps other than

those specified. The cap may become stuck.

■To avoid damage to the tire pressure warning valves and transmit-

ters When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire. (P. 335)

■Driving on rough roads

Take particular care when driving on roads with loose surfaces or pot- holes. These conditions may cause losses in tire inflation pressure, reducing the cushioning ability of the tires. In addition, driving on rough roads may cause damage to the tires themselves, as well as the vehicle’s wheels and body.

■Low profile tires (18-inch tires)

Low profile tires may cause greater damage than usual to the tire wheel when sustaining impact from the road surface. Therefore, pay attention to the following: ●Be sure to use proper tire inflation pressure. If tires are under-inflated,

they may be damaged more severely.

●Avoid potholes, uneven pavement, curbs and other road hazards. Fail-

ure to do so may lead to severe tire and wheel damage.

■If tire inflation pressure of each tire becomes low while driving Do not continue driving, or your tires and/or wheels may be ruined.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

342
Tire inflation pressure

Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. (P. 435)

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

343

Inspection and adjustment procedure

Tire valve Tire pressure gauge

Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the gauge gradations. If the tire inflation pressure is not at the recommended level, adjust the pressure. If you add too much air, press the center of the valve to deflate. After completing the tire inflation pressure measurement and adjustment, apply soapy water to the valve and check for leakage. Put the tire valve cap back on.

■Tire inflation pressure check interval

You should check tire inflation pressure every two weeks, or at least once a month. Do not forget to check the spare.

■Effects of incorrect tire inflation pressure

Driving with incorrect tire inflation pressure may result in the following: ●Reduced fuel efficiency ●Reduced driving comfort and tire life ●Reduced safety ●Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer.

AVALON (U)_(OM41452U)

344

6-3. Do-it-yourself maintenance

■Instructions for checking tire inflation pressure

When checking tire inflation pressure, observe the following: ●Check only when the tires are cold.

If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading.

●Always use a tire pressure gauge.

The appearance of the tire can be misleading. In addition, tire inflation pressure that is even just a few pounds off can affect ride quality and handling.

●Do not reduce tire inflation pressure after driving. It is normal for tire

inflation pressure to be higher after driving. ●Never exceed the vehicle capacity weight.

Passengers and luggage weight should be placed so that the vehicle is balanced.

CAUTION

■Proper inflation is critical to save tire performance

Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury: ●Excessive wear ●Uneven wear ●Poor handling ●Possibility of blowouts resulting from overheated tires ●Poor sealing of the tire bead ●Wheel deformation and/or tire separation ●A greater possibility of tire damage from road hazards

NOTICE

■When inspecting and adjusting tire inflation pressure

Be sure to put the tire valve caps back on. Without the valve caps, dirt or moisture could get into the valve and cause air leakage, which could result in an accident. If the caps are lost, replace them as soon as possible.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

345

Wheels

If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control.

Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width and inset*. Replacement wheels are available at your Toyota dealer. *: Conventionally referred to as “offset”. Toyota does not recommend using the following: ● Wheels of different sizes or types ● Used wheels ● Bent wheels that have been straightened

Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with

your aluminum wheels.

● When rotating, repairing or changing your tires, check that the

wheel nuts are still tight after driving 1000 miles (1600 km).

● Be careful not to damage the aluminum wheels when using tire

chains.

● Use only Toyota genuine balance weights or equivalent and a plas-

tic or rubber hammer when balancing your wheels.

AVALON (U)_(OM41452U)

346

6-3. Do-it-yourself maintenance

■When replacing wheels

The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning valves and trans- mitters must be installed. (P. 335)

CAUTION

■When replacing wheels

●Do not use wheels that are a different size from those recommended in

the Owner’s Manual, as this may result in a loss of handling control.

●Never use an inner tube in a leaking wheel which is designed for a tubeless tire. Doing so may result in an accident, causing death or seri- ous injury.

■When installing the wheel nuts

facing

tapered ends

●Be sure to install the wheel nuts with the inward. Installing the nuts with the tapered ends facing outward can cause the wheel to break and eventually cause the wheel to come off while driving, which could to an accident resulting in death or serious injury.

lead

Tapered portion

●Never use oil or grease on the wheel bolts or wheel nuts.

Oil and grease may cause the wheel nuts to be excessively tightened, leading to bolt or disc wheel damage. In addition, the oil or grease can cause the wheel nuts to loosen and the wheel may fall off, causing an accident and resulting in death or serious injury. Remove any oil or grease from the wheel bolts or wheel nuts.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

347

NOTICE

■Replacing tire pressure warning valves and transmitters

●Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.

●Ensure that only genuine Toyota wheels are used on your vehicle.

Tire pressure warning valves and transmitters may not work properly with non-genuine wheels.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

348
Air conditioning filter

The air conditioning filter must be changed regularly to maintain air conditioning efficiency.

Removal method

Turn the engine switch off. Open the glove box. (P. 258) Lift up the side with the stay, disconnect the stay tabs and remove the partition by pulling horizontally.

Remove the glove box cover.

Press the tabs and remove the filter cover.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

349

Remove the air conditioning fil- ter and replace it with a new one. The “UP” marks shown on the fil- ter should be pointing up.

■Checking interval

Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Schedule maintenance guide” or “Owner’s Manual Supplement”.)

■If air flow from the vents decreases dramatically

The filter may be clogged. Check the filter and replace if necessary.

NOTICE

■When using the air conditioning system

Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

350
Electronic key battery

Replace the battery with a new one if it is depleted.

You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2032

Replacing the battery

Take out the mechanical key.

Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.

Remove the depleted battery. Insert a new battery with the “+” terminal facing up.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

351

■Use a CR2032 lithium battery

●Batteries can be purchased at your Toyota dealer, local electrical appliance

shops or camera stores.

●Replace only with the same or equivalent type recommended by the manu-

facturer.

●Dispose of used batteries according to local laws.

■If the electronic key battery is depleted

The following symptoms may occur: ●The smart key system and wireless remote control will not function properly. ●The operational range will be reduced.

CAUTION

■Removed battery and other parts

These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury.

NOTICE

■For normal operation after replacing the battery

Observe the following precautions to prevent accidents: ●Always work with dry hands.

Moisture may cause the battery to rust.

●Do not touch or move any other component inside the remote control. ●Do not bend either of the battery terminals.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

352
Checking and replacing fuses

If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary.

Turn the engine switch off. After a system failure, see “Fuse layout and amperage ratings” for details about which fuse to check. (P. 354) Open the Fuse box cover.

 Engine compartment

Push the tab in and lift the lid off.

 Driver’s side instrument panel

Remove the lid.

Remove the fuse with the pull- out tool. Only type A fuse can be removed using the pullout tool.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

353

Check if the fuse is blown.

Normal fuse Blown fuse Type A and B: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type C: Contact your Toyota dealer.

 Type A

 Type B

 Type C

AVALON (U)_(OM41452U)

354

6-3. Do-it-yourself maintenance

Fuse layout and amperage ratings ■ Engine compartment  Fuse block

 Fuse block on the back of the cover

Fuse

Ampere

Circuit

Gauge and meters Electric cooling fans

Air conditioning system

Charging system

5 A 50 A 30 A No circuit 50 A 140 A*1
120 A*2
30 A

Vehicle stability control system

1 METER-IG2
2 FAN 3 H-LP CLN 4 HTR

5 ALT

6 ABS NO.2

AVALON (U)_(OM41452U)

Fuse 7 ST/AM2

8 H-LP-MAIN

9 ABS NO.1
10 EPS 11 S-HORN 12 HORN

6-3. Do-it-yourself maintenance

355

Ampere

Circuit

Starter system

30 A 30 A H-LP LH-LO, H-LP RH-LO, headlights

(low beam) Vehicle stability control system Electric power steering

50 A 80 A 7.5 A S-HORN 10 A Horns

13 EFI NO.2

15 A

Multiport fuel injection system/sequential multiport fuel injection system, electronic controlled transmission

14 EFI NO.3

15 INJ

16 ECU-IG2 NO.3

7.5 A

10 A Multiport fuel injection system/sequential

multiport fuel injection system

7.5 A Multiport fuel injection system/sequential

multiport fuel injection system Multiport fuel injection system/sequential multiport fuel injection system, steering lock system, electronic controlled trans- mission, stop lights, high-mounted stop light Starter system

15 A 20 A No circuit

25 A

IGN, INJ, METER-IG2, ECU-IG2 NO.3, A/B, ECU-IG2 NO.2, ECU-IG2 NO.1

7.5 A Charging system 5 A MAYDAY

Turn signal lights, emergency flashers, gauge and meters Steering lock system Audio system

Left-hand headlight (low beam)

Right-hand headlight (low beam)

15 A

10 A 15 A 20 A*1
15 A*2
20 A*1
15 A*2

17 IGN 18 D/L-AM2

19 IG2-MAIN

20 ALT-S 21 MAYDAY

22 TURN&HAZ

23 STRG LOCK 24 AMP

25 H-LP LH-LO

26 H-LP RH-LO

AVALON (U)_(OM41452U)

356

6-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

27 EFI-MAIN NO.1
28 SMART 29 ETCS 30 TOWING

EFI NO.2, EFI NO.3, A/F sensor No circuit Electronic throttle control system

30 A 5 A 10 A 20 A No circuit

31 EFI NO.1

7.5 A

Multiport fuel injection system/sequential multiport fuel injection system, electronic controlled transmission A/F sensor

32 A/F 33 AM2
34 RADIO-B

20 A 7.5 A Smart key system 20 A

7.5 A

35 DOME

36 ECU-B NO.1

Audio system, navigation system Vanity lights, lights, personal/interior trunk light, door courtesy lights, illumi- nated entry system, ambient light Multiplex communication system, smart key system, gauge and meters, starter system, steering sensor, air conditioning system, outside rear view mirror, front power seats Spare fuse Spare fuse *1: Vehicles with discharge headlight low beam *2: Vehicles with halogen headlight low beam

37 SPARE 38 SPARE

25 A 30 A

10 A

AVALON (U)_(OM41452U)

■ Driver’s side instrument panel

6-3. Do-it-yourself maintenance

357

Fuse 1 H-LP LVL 2 S/HTR RR

Ampere 7.5 A Automatic headlight leveling system 20 A Rear seat heater

Circuit

3 ECU-ACC

5 A

4 RR P/OUTLET

5 ECU-IG2 NO.2

6 ECU-IG2 NO.1

7 A/B

10 A

Outside rear view mirrors, glove box light, air conditioning system, multiplex com- munication system Power outlet

15 A 7.5 A Multiplex communication system, smart

key system

7.5 A Multiport fuel injection system/sequential

multiport fuel injection system Front passenger occupant classification system, SRS airbag system Fuel filler door lock

10 A 20 A Multiplex communication system, power

door lock, trunk opener switch Pre-collision system Power seats

30 A 30 A 10 A Moon roof 7.5 A Air conditioning system

8 FUEL DR LOCK

9 D/L-AM1

10 PSB 11 P/SEAT FR 12 S/ROOF 13 A/C-B

AVALON (U)_(OM41452U)

358

6-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

14 STOP

7.5 A

Stop/tail lights, multiport fuel injection system/sequential multiport fuel injection system, vehicle stability control system, anti-lock brake system, electronic con- trolled transmission, high mounted stop- light, smart key system, shift lock control system

15 AM1
16 4-WAY LUMBAR

7.5 A No circuit 7.5 A Power seat

17 ECU-B NO.2

10 A

Smart key system, tire pressure warning system, power window, front passenger occupant classification system

18 OBD 19 S/HTR&FAN F/L 20 S/HTR&FAN F/R 21 RADIO-ACC 22 FR P/OUTLET

23 WIPER-S

10 A On-board diagnosis system 10 A 10 A 5 A 15 A 10 A Dynamic radar cruise control, pre-colli-

Seat heaters Seat heaters Audio system, navigation system Power outlet

sion system

24 EPS-IG1

7.5 A Electric power steering

25 BKUP LP

7.5 A

Back-up lights, multiport fuel injection system/sequential multiport fuel injection system, electronic controlled transmis- sion

26 WIPER 27 A/C-IG1
28 WASHER 29 DOOR R/L

30 DOOR F/L

25 A Windshield wipers and washer 7.5 A Air conditioning system 10 A Windshield wipers and washer 20 A Rear left-hand power windows

20 A

Power windows, outside rear view mir- rors

31 DOOR R/R

20 A Rear right-hand power windows

32 DOOR F/R

20 A

Power windows, outside rear view mir- rors

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

359

Fuse

Ampere

Circuit

33 TAIL

10 A

34 PANEL

10 A

35 ECU-IG1 NO.1

10 A

36 ECU-IG1 NO.2

10 A

Parking lights, side marker lights, stop/tail lights, rear turn signal lights, back up lights, license plate lights, fog lights Switch illumination, air conditioning sys- tem, glove box light, interior lights, per- sonal lights, audio system, navigation system, rear sunshade, seat heater, Blind Spot Monitor, driving mode select switch, steering wheel switch, ambient light, trunk opener switch, vehicle stability control off switch, emergency flashers, outside rear view mirrors Vehicle stability control system, electric cooling fans, steering sensor, multiport fuel injection system/sequential multiport fuel injection system, charging system, rear window defogger, outside rear view mirror defoggers, rain-sensing windshield wipers, Blind Spot Monitor, rear sun- shade, dynamic radar cruise control, mul- tiplex communication system, rear seat heater, backup lights, fog lights, headlight (high beam), daytime running light, pre- collision system Shift lock control system, seat heaters, smart key system, tire pressure warning system, wireless remote control, multi- plex communication system, audio sys- tem, navigation system, moon roof, auto anti-glare inside rear view mirror, outside rear view mirrors, pre-collision system, air conditioning controls, rain-sensing windshield wipers, starting system, dynamic radar cruise control

AVALON (U)_(OM41452U)

360

6-3. Do-it-yourself maintenance

■After a fuse is replaced

●If the lights do not turn on even after the fuse has been replaced, a bulb may

need replacement. (P. 361)

●If the replaced fuse blows again, have the vehicle inspected by your Toyota

dealer.

■If there is an overload in a circuit

The fuses are designed to blow, protecting the wiring harness from damage.

■When replacing light bulbs

Toyota recommends that you use genuine Toyota products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable.

CAUTION

■To prevent system breakdowns and vehicle fire

Observe the following precautions. Failure to do so may cause damage to the vehicle, and possibly a fire or injury. ●Never use a fuse of a higher amperage rating than that indicated, or use

any other object in place of a fuse.

●Always use a genuine Toyota fuse or equivalent.

Never replace a fuse with a wire, even as a temporary fix.

●Do not modify the fuses or fuse boxes.

NOTICE

■Before replacing fuses

Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

361

Light bulbs

You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.

Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P. 436)

AVALON (U)_(OM41452U)

362

6-3. Do-it-yourself maintenance

Bulb locations ■ Front

Headlight low beam (halogen bulb) Headlight high beam and daytime running light (vehicles with halogen bulbs for low beams) Headlight high beam (vehicles with discharge bulbs for low beams) Fog light (if equipped) Front turn signal/parking light

AVALON (U)_(OM41452U)

■ Rear

6-3. Do-it-yourself maintenance

363

Rear turn signal light Back-up light License plate light

AVALON (U)_(OM41452U)

364

6-3. Do-it-yourself maintenance

Replacing light bulbs ■ Headlight low beam (halogen bulb)

Unplug the connector while pressing the lock release.

Turn the bulb base counter- clockwise.

Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set.

Set the connector. After installing the connector, shake the bulb base gently to check that it is not loose, turn the headlights on once and visu- ally confirm that no light is leak- ing through the mounting.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

365

■ Headlight high beam and daytime running light (vehicles with halogen bulbs for low beams)/Headlight high beam (vehicles with discharge bulbs for low beams)

Unplug the connector while pressing the lock release.

Turn the bulb base counter- clockwise.

Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set.

Set the connector. After installing the connector, shake the bulb base gently to check that it is not loose, turn the headlights on once and visu- ally confirm that no light is leak- ing through the mounting.

AVALON (U)_(OM41452U)

366

6-3. Do-it-yourself maintenance

■ Fog light (if equipped)

turn

To allow enough working space, the steering wheel to the opposite side of the bulb to be replaced. Remove the 3 fender liner clips. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replac- ing the left side light bulb.

Remove the fender liner bolt and partly remove the fender liner.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

367

Unplug the connector while pressing the lock release.

Turn the bulb base counter- clockwise.

Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set.

Set the connector. After installing the connector, shake the bulb base gently to check that it is not loose, turn the fog lights on once and visu- ally confirm that no light is leak- ing through the mounting.

AVALON (U)_(OM41452U)

368

6-3. Do-it-yourself maintenance

Reinstall the fender liner and the fender liner bolt.

Reinstall clips.

the

fender

liner

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

369

turn

■ Front turn signal/parking light To allow enough working space, the steering wheel to the opposite side of the bulb to be replaced. Remove the 3 fender liner clips. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replac- ing the left side light bulb.

Remove the fender liner bolt and partly remove the fender liner.

AVALON (U)_(OM41452U)

370

6-3. Do-it-yourself maintenance

Unplug the connector while pressing the lock release.

Turn the bulb base counter- clockwise.

Remove the light bulb.

When installing, reverse the steps listed.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

371

■ Rear turn signal light trunk

the

the

luggage

lid and trim

Open remove cover clip.

Pull the hook while depress- ing the button.

Partly remove the luggage trim cover.

AVALON (U)_(OM41452U)

372

6-3. Do-it-yourself maintenance

Turn the bulb base counter- clockwise.

Remove the light bulb.

When installing, reverse the steps listed.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

373

■ Back-up light the

trunk

lid and Open remove the clips. Then partly remove trunk panel cover.

the

Turn the bulb base counter- clockwise.

Remove the light bulb.

When installing, reverse the steps listed.

AVALON (U)_(OM41452U)

374

6-3. Do-it-yourself maintenance

■ License plate light Remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape.

Remove the lens. Insert a properly sized screw- driver into the hole of the lens, and pry off the lens as shown in the illustration. To prevent damaging the vehi- cle, wrap the screwdriver with a tape. Remove the light bulb.

When installing, reverse the steps listed.

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

375

■ Replacing the following bulbs

If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlight low beams (discharge bulb) ● Daytime running lights (vehicles with discharge headlights) ● Side marker lights ● Side turn signal lights ● Stop/tail lights ● High mounted stoplight ● Outer foot lights (if equipped)

AVALON (U)_(OM41452U)

376

6-3. Do-it-yourself maintenance

■Discharge headlights (if equipped)

If voltage to the discharge bulbs is insufficient, the bulbs may not come on, or may go out temporarily. The discharge bulbs will come on when normal power is restored. ■LED light bulbs

The daytime running lights (vehicles with discharge headlights), stop/tail lights, high mounted stoplight and outer foot lights each consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.

■Condensation build-up on the inside of the lens

Temporary condensation build-up on the inside of the lens does not indicate a malfunction. Contact your Toyota dealer for more information in the following situations: ●Large drops of water have built up on the inside of the lens. ●Water has built up inside the lens. ■Removing and installing the clips

The fender liner, luggage trim cover and trunk panel cover clip

Removing Installing

■When replacing light bulbs

P. 360

AVALON (U)_(OM41452U)

6-3. Do-it-yourself maintenance

377

CAUTION

■Replacing light bulbs

●Turn off the lights. Do not attempt to replace the bulb immediately after

turning off the lights. The bulbs become very hot and may cause burns.

●Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb. Also, if the bulb is scratched or dropped, it may blow out or crack.

●Fully install light bulbs and any parts used to secure them. Failure to do so may result in heat damage, fire, or water entering the headlight unit. This may damage the headlights or cause condensation to build up on the lens.

●Vehicles with discharge headlights:

While the low beam headlights are turned on, and for a short time after they have been turned off, metal com- ponents at the rear of the headlight assembly will be extremely hot. To pre- vent burns, do not touch these metal components until you are certain they have cooled down.

Metal components

AVALON (U)_(OM41452U)

378

6-3. Do-it-yourself maintenance

CAUTION

■Discharge headlights (if equipped)

●Contact your Toyota dealer before replacing the discharge headlights

(including light bulbs).

●Do not touch the discharge headlight’s high voltage socket when the head-

lights are turned on. An extremely high voltage of 30000 V will be discharged and could result in death or serious injury by electric shock.

●Do not attempt to take apart or repair the headlight bulbs, connectors,

power supply circuits, or related components. Doing so could result in electric shock and death or serious injury.

■To prevent damage or fire

●Make sure bulbs are fully seated and locked. ●Check the wattage of the bulb before installing to prevent heat damage.

AVALON (U)_(OM41452U)

When trouble arises

379

7-1. Essential information

Emergency flashers .......... 380
If your vehicle has to be stopped in an emergency ...................... 381

7-2. Steps to take in an

emergency If your vehicle needs to be towed ......................... 382
If you think something is wrong .......................... 385
Fuel pump shut off system ............................ 386
If a warning light turns on or a warning buzzer sounds ............................ 387
If a warning message is displayed ..................... 398
If you have a flat tire.......... 399
If the engine will not start................................. 412
If the shift lever cannot be shifted from P............. 414
If the electronic key does not operate properly........ 415
If the vehicle battery is discharged ...................... 418
If your vehicle overheats ........................ 422
If the vehicle becomes stuck ............................... 425

AVALON (U)_(OM41452U)

7-1. Essential information

380
Emergency flashers

The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc.

Press the switch.