Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)
338
3-2. Using the audio system
●Compatible media
Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible if the CD-R or CD-RW is not finalized. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
●Compatible disc formats
The following disc formats can be used.
• Disc formats: CD-ROM Mode 1 and Mode 2
CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)
MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Items related to standards and limitations are as follows.
• Maximum directory hierarchy: 8 levels
• Maximum length of folder names/file names: 32 characters
• Maximum number of folders: 192 (including the root)
• Maximum number of files per disc: 255
●File names
The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.
●Multi-sessions
As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played.
●ID3 and WMA tags
ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.
339
3-2. Using the audio system
●MP3 and WMA playback
When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnec- essary folders. If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.
●Extensions
If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
●Playback
• To play MP3 files with steady sound quality, we recommend a fixed bit
rate of at least 128 kbps and a sampling frequency of 44.1 kHz.
• CD-R or CD-RW playback may not be possible in some instances,
depending on the characteristics of the disc.
• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.
• When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc. In some cases, playback may not be possible at all.
• Microsoft, Windows, and Windows Media are the registered trade-
marks of Microsoft Corporation in the U.S. and other countries.
NOTICE
■CDs and adapters that cannot be used (→P. 331) ■CD player precautions (→P. 332)
340
3-2. Using the audio system Operating an iPod∗
Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod
STEP 1
Open the glove box and con- nect an iPod using an iPod cable.
Turn on the power of the iPod if it is not turned on.
STEP 2
Press
CTH32AS024
∗: If equipped
341
3-2. Using the audio system
■ Control panel
Power
Volume
Selecting a track/ fast-forwarding and rewinding
Selector knob
Selector buttons
Playback/pause
Displaying text messages
Playback
342
3-2. Using the audio system
Selecting a play mode
(BROWSE) to select iPod menu mode.
or
as corresponds to the
(MORE) to change to the second selection list.
Second selection
Third selection
Fourth selection
STEP 1
STEP 2
Press Press desired play mode. Pressing
■ Play mode list
Play mode
PLIST
First
selection
Playlist select
ARTIST
Artist select
ALBUM
Albums select
Songs select Albums select Songs select
GENRE
Genre select
Artists select
SONGS
PODCST
COMPSR
BOOK
Songs select Albums select Composers select Songs select
Songs select Albums select
Songs select
Albums select
Songs select
Songs select
Depending on the model, the name of your iPod may be displayed at the top of the list.
343
3-2. Using the audio system
■ Selecting a list
STEP 1
Turn
to display the first selection list.
STEP 2
Press
to select the desired item.
STEP 3
Repeat the same procedure to select the desired song name.
To return to the previous selection list, press
).
Selecting songs from a song list
STEP 1
Press The current playlist is displayed.
(LIST).
STEP 2
Turning
to select the desired song.
Press
returns the screen from list display to the previous
screen.
344
3-2. Using the audio system
Selecting songs
Turn
or press “∧” or “∨” on
to select the desired song.
Playing and pausing songs
Press
Fast-forwarding and rewinding songs
Press and hold “∧” or “∨” on
Shuffle playback
■ Playing songs from one playlist or album in random order
Press To cancel, press the button twice.
(RDM).
■ Playing songs from all the playlists or albums in random order
Press To cancel, press the button again.
(RDM) twice.
Repeat play
Press
(RPT).
To cancel, press the button again. Even when the repeat play option has not been selected, playback will automatically continue from the first song in the current play list once the last song has ended.
345
3-2. Using the audio system
Switching the display
Press
is pressed, the display changes in the following
Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time
■About iPod
●Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
●iPod is a trademark of Apple Inc., registered in the U.S. and other coun-
tries.
■iPod functions
●When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used.
●Depending on the iPod that is connected to the system, certain functions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions.
■iPod problems
To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner's Man- ual.
■Error messages
“iPod ERROR”:
“NO SONGS”:
This indicates a problem in the iPod, inside the USB box or the connection between them. This indicates that there is no music data in the iPod.
“UPDATE YOUR iPod”: This indicates that the version of the iPod is not
compatible.
346
3-2. Using the audio system
■Compatible models
Model
iPod iPod nano
iPod touch iPod classic
Generation
5th generation 1st generation 2nd generation 3rd generation 1st generation 1st generation
Software version Ver. 1.2.0 or higher Ver. 1.3.0 or higher Ver. 1.1.2 or higher Ver. 1.0.0 or higher Ver. 1.1.0 or higher Ver. 1.0.0 or higher
Depending on differences between models or software version etc., some
models listed above might be incompatible with this system.
iPod 4th generation and earlier models are not compatible with this system.
iPhone, iPod mini, iPod shuffle and iPod photo are not compatible with this
system.
Items related to standards and limitations are as follows:
●Maximum number of lists in a device: 9999
●Maximum number of songs in a device: 65025
●Maximum number of songs per list: 65025
CAUTION
■Caution while driving
Do not connect iPod or operate the controls.
NOTICE
■To prevent damage to iPod
●Do not leave iPod in the vehicle. The temperature inside may become
high, resulting in damage to the player.
●Do not push down on or apply unnecessary pressure to the iPod while it is
connected as this may damage the iPod or its terminal.
●Do not insert foreign objects into the port as this may damage the iPod or
its terminal.
347
3-2. Using the audio system Operating a USB memory∗
Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory
STEP 1
Open the glove box and con- nect a USB memory.
Turn on the power of the USB memory if it is not turned on.
STEP 2
Press
CTH32AS024
348
∗: If equipped
3-2. Using the audio system
■ Control panel
Power
Volume
Selecting a track/ fast-forwarding and rewinding
Selector knob
Selecting a folder and file
Selector buttons
Searching playback
Playback/pause
Displaying text messages
Playback
Selecting and scanning a folder
■ Selecting a folder
Press “∧” or “∨” on
to select the desired folder.
■ Returning to the first file of the first folder
Press and hold “∨” on
until you hear a beep.
■ Scanning the first file of all the folders
STEP 1
STEP 2
Press and hold The first ten seconds of the first file in each folder will be played. When the desired folder is reached, press again.
until you hear a beep.
349
3-2. Using the audio system
Selecting and scanning files
■ Selecting a file
Turn
or press “∧” or “∨” on
to select the desired file.
■ Scanning the files in a folder
Press
The first ten seconds of each file will be played.
To cancel, press
again.
When the desired file is reached, press
again.
Playing and pausing files
Press
Fast-forwarding and rewinding files
Press and hold “∧” or “∨” on
Random playback
■ Playing files from a folder in random order
Press
(RDM).
To cancel, press the button twice.
■ Playing all the files from a USB memory in random order
Press To cancel, press the button again.
(RDM) twice.
350
Repeat play
■ Repeating a file
Press
(RPT).
To cancel, press the button twice.
■ Repeating all the files in a folder
Press
(RPT) twice.
To cancel, press the button again.
Switching the display
Press
3-2. Using the audio system
is pressed, the display changes in the following
Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time
■USB memory functions
Depending on the USB memory that is connected to the system, certain functions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions.
■Error messages
“USB ERROR”: This indicates a problem either in the USB memory or
inside the USB box or connection between them.
“NO SUPPORT”: This indicates that no MP3/WMA files are included in the
USB memory.
351
3-2. Using the audio system
■USB memory
●Compatible device
USB memories that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible.
●Compatible device formats
The following device formats can be used: • USB communication formats: USB2.0 FS (12 mbps) • File formats: FAT16/32 (Windows) • Correspondence class: Mass storage class
MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Items related to standards and limitations are as follows:
• Maximum directory hierarchy: 8 levels
• Maximum number of folder in device: 999 (including the root)
• Maximum number of files in device: 65025
• Maximum number of files per folder: 255
●MP3 and WMA files
MP3 (MPEG Audio LAYER 3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size using
MP3 compression.
WMA (Windows Media® Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
There is a limit to the MP3 and WMA file standards that can be used and to
the media/formats on which the files are recorded.
352
3-2. Using the audio system
●MP3 file compatibility
• Compatible standards
MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5)
• Compatible sampling frequencies
MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz)
• Compatible bit rates (compatible with VBR) MPEG1 AUDIO LAYERII, III: 32-320 (kbps) MPEG2 AUDIO LAYERII, III: 32-160 (kbps) MPEG2.5: 32-160 (kbps)
• Compatible channel modes: stereo, joint stereo, dual channel and
monaural
●WMA file compatibility
• Compatible standards
WMA Ver. 9
• Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)
• Compatible bit rates
HIGH PROFILE 32-320 (kbps, VBR)
●File names
The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.
●ID3 and WMA tags
ID3 tags can be added to MP3 files, making it possible to record the track
title, artist name, etc.
The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.)
WMA tags can be added to WMA files, making it possible to record the
track title and artist name in the same way as with ID3 tags.
●MP3 and WMA playback
When a device containing MP3 or WMA files is plugged, all files in the USB memory device are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders.
353
3-2. Using the audio system
●Extensions
If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
●Playback
• To play MP3 file with steady sound quality, we recommend a fixed bit
rate of at least 128 kbps and a sampling frequency of 44.1 kHz.
• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.
• Microsoft, Windows, and Windows Media are the registered trade-
marks of Microsoft Corporation in the U.S.A. and other countries.
CAUTION
■Caution while driving
Do not use a USB memory, or connect a USB memory.
NOTICE
■To prevent damage to a USB memory
●Do not leave a USB memory in the vehicle. The temperature inside may
become high, resulting in damage to the player.
●Do not push down on or apply unnecessary pressure to the USB memory while it is connected as this may damage the USB memory or its terminal. ●Do not insert foreign objects into the port as this may damage the USB
memory or its terminal.
354
3-2. Using the audio system Optimal use of the audio system
Type A
Adjusting the sound quality and ASL
Type B and C
Selector buttons
Adjusting the sound quality and ASL
Menu button
355
3-2. Using the audio system
Using the audio control function
■ Changing sound quality modes Type A
Pressing
selects the mode to be changed in the following
order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL”
STEP 1
Type B and C Press Press corresponds to the desired mode. “BASS”, “MID” (type C only), “TREB”, “FADE”, or “BAL”
or
STEP 2
(type C only) as
■ Adjusting sound quality
Turning
or
adjusts the level.
Type A
Mode displayed
BAS TRE
FAD
BAL
Sound qual-
ity mode Bass* Treble* Front/rear volume balance Left/right volume balance
Level
-5 to 5
-5 to 5
Turn to the
left
Turn to the
right
Low
High
F7 to R7
Shifts to rear
Shifts to
front
L7 to R7
Shifts to left Shifts to right
*: The sound quality level is adjusted individually in each radio
mode or CD mode.
356
3-2. Using the audio system
Type B and C
Mode displayed
BASS
MID
TREB
FADE
BAL
Sound qual-
ity mode Bass*
Mid-range* (type C only)
Treble* Front/rear volume balance Left/right volume balance
Turn to the
left
Turn to the
right
Low
High
Level
-5 to 5
-5 to 5
-5 to 5
F7 to R7
Shifts to rear
Shifts to
front
L7 to R7
Shifts to left Shifts to right
*: The sound quality level is adjusted individually in each audio
mode.
■ Adjusting the Automatic Sound Levelizer (ASL) Type A
When “ASL” is selected, turning
to the right changes the
“ASL” level in the order of “LOW”, “MID” and “HIGH”.
Turning
to the left turns “ASL” off.
ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
357
3-2. Using the audio system
STEP 1
STEP 3
STEP 2
(MORE). (ASL).
Type B and C Press Press Press Press only) as corresponds to the desired mode. Type B: “LOW”, “MID”, “HIGH”, or “OFF” Type C: “ON” or “OFF”
STEP 4
(type B only) or
(type B
ASL automatically adjusts the volume and tone quality according to vehicle speed.
■ Setting the number of preset pages (type B and C) The number of preset pages desired can be set from 1 to 6. The initial setting is 6 pages.
STEP 1
STEP 2
STEP 3
STEP 4
Press Press Press Press or sponds to the desired number of preset pages.
(MORE). (PRESET).
as corre-
■ Language settings (type B and C)
→P. 315
358
3-2. Using the audio system
Party mode switch
You can switch the sounds quality types by pressing the switch.
Base mode Party mode In party mode, the sound volume from the speakers on the back door is bigger than in base mode. (The output from the speakers on the rear doors will be transferred to the back door speakers.)
CTH32AS048
■Trademark owned by SRS Labs, Inc. (type B and C)
The audio systems utilize SRS FOCUSTM and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.
FOCUS, TruBass, SRS and Inc. FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.
symbols are trademarks of SRS Labs,
359
3-2. Using the audio system Using the AUX port
This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers.
STEP 1
Open the cover and connect the portable audio device.
STEP 2
Press
or
CTH32AS023
■Operating portable audio devices connected to the audio system
The volume can be adjusted using the vehicle's audio controls. All the other adjustments must be made on the portable audio device itself.
■When using a portable audio device connected to the power outlet
Noise may occur during playback. Use the power source of the portable audio device.
360
3-2. Using the audio system Using the steering wheel audio switches∗
Some audio features can be controlled using the switches on the steering wheel.
CTH32AS046
vol-
Increases/decreases ume Radio mode: Selects radio stations CD mode: Selects tracks, files (MP3 and WMA) and discs (type C only) iPod mode:
Selects a song USB memory mode:
Selects a folder
file and
Bluetooth® audio mode:
Selects a track and album
Turns the power on, selects an audio source
∗: If equipped
361
3-2. Using the audio system
Turning the power on
Press
when the audio system is turned off.
The audio system can be turned off by holding the switch down until you hear a beep.
Changing the audio source
when the audio system is turned on. The audio source
Press changes as follows each time the switch is pressed. If no discs are inserted in the player, that mode will be skipped. FM→SAT→CD (type B only)→CD changer (type C only)→Bluetooth® Audio→AUX→USB/iPod→AM
Adjusting the volume
Press “+” on volume.
to increase the volume and “-” to decrease the
Press and hold the switch to continue increasing or decreasing the vol- ume.
Selecting a radio station
Press Press “∨” or “∧” on
to select radio mode.
to select a radio station.
To scan for receivable stations, press and hold “∨” or “∧” on until you hear a beep.
STEP 1
STEP 2
362
3-2. Using the audio system
Selecting a track/file or song
to select CD, iPod, USB memory or Bluetooth®
to select the desired track/file or
STEP 1
STEP 2
Press audio mode. Press “∨” or “∧” on song.
Selecting a folder or album
to select the CD, USB memory or Bluetooth®
STEP 1
STEP 2
Press audio mode. Press and hold “∨” or “∧” on
until you hear a beep.
Selecting a disc in the CD player (type C only)
STEP 1
STEP 2
Press Press and hold “∨” or “∧” on
to select CD mode.
until you hear a beep.
CAUTION
■To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.
363
3-3. Using the Bluetooth® audio system Bluetooth® audio system∗
The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your por- table player does not support Bluetooth®, the Bluetooth® audio sys- tem will not function. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.
Title
Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Setting up a Bluetooth® enabled portable player Bluetooth® audio system setup
Page
P. 367
P. 372
P. 374
P. 379
■Conditions under which the system will not operate
●If using a portable player that does not support Bluetooth® ●If the portable player is switched off ●If the portable player is not connected ●If the portable player’s battery is low ●If the portable player is behind the seat or in the glove box or console box ●If metal is covering or touching the portable player
364
∗: If equipped
3-3. Using the Bluetooth® audio system
■When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 403)
■About Bluetooth®
Bluetooth is a registered trademark of Bluetooth SIG. Inc.
■Compatible models
●Bluetooth® specifications:
Ver. 1.2
●Following Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.
1.3 or higher recommended)
Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.
■Certification for the Bluetooth® audio system
775E-K025
FCC ID: AJDK025
IC ID:
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired oper-
ation.
365
3-3. Using the Bluetooth® audio system
CAUTION
■FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
■Caution while driving
Do not connect portable players or operate the controls.
NOTICE
■To prevent damage to portable players
Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.
366
3-3. Using the Bluetooth® audio system Using the Bluetooth® audio system
■ Audio unit
Display Track title, Artist name, Album name, Elapsed time, “Streaming Audio”, etc. is displayed. Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth-Audio tion condition
connec-
If “BT” is not displayed, the Bluetooth® audio system cannot be used.
367
■ Microphone
CTH33AS001
3-3. Using the Bluetooth® audio system
Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio sys-
tem without the need to check the display or operate
■ Operation procedure when using voice commands
Press the talk switch and follow voice guidance instructions.
■ Auxiliary commands when using voice commands
The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the Bluetooth® audio setup “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function
368
3-3. Using the Bluetooth® audio system
Using the Bluetooth® audio system for the first time
Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player:
STEP 1
STEP 2
Press and hold Press
(SETUP).
until “BT AUDIO” is displayed.
The introductory guidance and portable player name registration instructions are heard.
STEP 3
Select “Pair Audio Players (Pair audio player)” using a voice
command or
STEP 4
Register a portable player name by either of the following methods:
a. Select “Record Name” using
, and say the name to
be registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.
STEP 5
Select “Confirm” using a voice command or
A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard.
369
3-3. Using the Bluetooth® audio system
STEP 6
Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player.
Guidance for registration completion is heard. If the portable player has a Bluetooth® phone, the phone can be reg- istered at the same time. (→P. 386)
Menu list of the Bluetooth® audio system
First menu
Second menu
Third menu
Operation detail
Setup (Setup)
Pair Audio Players (Pair audio player) Select Audio Player
Change Name
List Audio Players Set Passkey Delete Audio Player Guidance Vol- ume
Device Name
Reset Setting
BT Audio Setup (BT audio setup)
System Setup
Registering a portable player
Selecting a portable player to be used Changing the registered name of a portable player Listing the registered porta- ble players Changing the passkey Deleting a registered porta- ble player Setting voice guidance vol- ume Displaying the Bluetooth® device address and name Initializing the system
“BT Audio Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.
370
3-3. Using the Bluetooth® audio system
■When using a voice command
For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly.
■Situations that the system may not recognize your voice
●When driving on rough roads ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise
■Operations that cannot be performed while driving
●Operating the system with
●Registering a portable player to the system
■Changing the passkey
→P. 377
371
3-3. Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player
Power
Volume
Fast-forwarding and reversing
Selecting tracks
Selector knob
Playback
Playback/pause
Displaying text messages
Selecting an album
Press “∨” or “∧” on
Selecting tracks
Press “∧” or “∨” on
Playing and pausing tracks
Press
372
3-3. Using the Bluetooth® audio system
Fast-forwarding and reversing tracks
Press and hold “∧” or “∨” on
Switching the display
Press
is pressed, the display changes in the following
Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time
Using the steering wheel audio switches
→P. 361
■Bluetooth® audio system functions
Depending on the portable player that is connected to the system, certain functions may not be available.
373
3-3. Using the Bluetooth® audio system Setting up a Bluetooth® enabled portable player
Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for reg- istered portable players: ■ Functions and operation procedures
STEP 1
Press and hold
until “BT AUDIO” is displayed.
STEP 2
STEP 3
(SETUP).
Press Select one of the following functions using a voice com-
mand or
● Registering a portable player
“Pair Audio Players (Pair audio player)” ● Selecting a portable player to be used
“Select Audio Player”
● Changing the registered name of a portable player
“Change Name”
● Listing the registered portable players
“List Audio Players”
● Changing the passkey
“Set Passkey”
● Deleting a registered portable player
“Delete Audio Player”
374
3-3. Using the Bluetooth® audio system
Registering a portable player
Select “Pair Audio Players (Pair audio player)” using a voice com-
mand or
, and perform the procedure for registering a portable
player. (→P. 369)
Selecting a portable player to be used
STEP 1
Select “Select Audio Player” using a voice command or
STEP 2
Select the portable player to be used by either of the following methods, and select “Confirm” using a voice command or
a. Press the talk switch and say the name of the desired por-
table player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
375
3-3. Using the Bluetooth® audio system
STEP 3
Press the talk switch and say “From car” or “From audio”, and
select “Confirm” using a voice command or
Vehicles with smart key system: If “From car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode. Vehicles without smart key system: If “From car” is selected, the por- table player will be automatically connected whenever the engine switch is in either the “ACC” or “ON” position.
Changing the registered name of a portable player
STEP 1
Select “Change Name” using a voice command or
STEP 2
Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a
voice command or
a. Press the talk switch and say the name of desired portable
player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
STEP 3
Press the talk switch or select “Record Name” using
and say the new name.
STEP 4
Select “Confirm” using a voice command or
376
3-3. Using the Bluetooth® audio system
Listing the registered portable players
Select “List Audio Players” using a voice command or
. The list
of registered portable players will be read aloud. When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player”
Changing the passkey
STEP 1
Select “Set Passkey” using a voice command or
STEP 2
Press the talk switch, say a 4 to 8-digit number, and select
“Confirm” using a voice command or
STEP 3
When the entire number to be registered as a passkey has
been input, press
again.
377
3-3. Using the Bluetooth® audio system
Deleting a registered portable player
STEP 1
Select “Delete Audio Player” using a voice command or
STEP 2
Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or
a. Press the talk switch and say the name of the desired por-
table player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.
STEP 3
Select “Confirm” using a voice command or
■The number of portable players that can be registered Up to 2 portable players can be registered in the system.
378
3-3. Using the Bluetooth® audio system Bluetooth® audio system setup
■ System setup items and operation procedures
→P. 401
379
3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗
This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. ■ Hands-free system quick guide
STEP 1
STEP 2
STEP 3
Setting a cellular phone. (→P. 384)