Download PDF Manual


NOTICE


n To prevent damage to the back door components


l Do not apply any force, paint or let any other foreign matter on the damper. l Do not apply excessive force when the back door closer is operating. l Make sure there is nothing in the doorway before closing. l Do not allow more than one person to get on the rear step bumper at a


time.


40


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 41 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Front seats


Manual seat


Seat position adjustment lever Seat cushion angle adjust- ment knob (driver’s side only) Seat height adjustment lever (driver’s side only) Seatback angle adjustment lever Seat lumbar support adjust- ment switch (driver’s side only)


Seat position adjustment switch Seatback angle adjustment switch Seat cushion angle adjust- ment switch (driver’s side only) Seat height adjustment switch (driver’s side only) Seat lumbar support adjust- ment switch (driver’s side only)


Power seat


4RUNNER_U_(L/O_0808)


41


4RUNNER_U.book Page 42 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Flattening seatback


n When flattening the seatbacks (vehicles with manual seat)


Remove the head restraint. (→P. 61) Move the seat to the front- most lock position.


Pull the seatback angle adjust- ment lever to unlock the seat- back and then push down the seatback.


n When flattening the seatbacks (vehicles with power seat)


Remove the head restraint. (→P. 61) Move the seat to the front- most lock position.


42


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 43 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Move the seatback angle adjust- ment switch backward to flatten the seatback.


n Waterproof and water-repellent seats (vehicles with off-road package) Waterproof and water-repellent seats are installed in your vehicle; however, the water-repellent effect does not last forever.


n When returning the seatback upright (vehicles with manual seat)


Be careful not to make yourself hit by the seatback which will bound with considerable spring force.


CAUTION


n Seat adjustment


l Be careful that the seat does not hit passengers or luggage. l Do not recline the seat more than necessary when the vehicle is in motion


to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.


l Manual seat only: After adjusting the seat, make sure that the seat is


locked in position.


n While driving


l Do not allow passengers to ride on the flattened seat. l Do not drive with the head restraints removed.


43


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 44 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats


n Second seats (vehicles without third seats)


The second seats do not have a seat adjustment function.


n Second seats (vehicles with third seats)


Seatback angle adjustment lever


44


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 45 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Third seats (if equipped)


Seatback angle adjustment lever


Folding down the second seats (vehicles without third seats)


n Before folding down the second seats


Adjust the head restraint to the downmost position.


45


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 46 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


the second seat belt


Stow buckle.


Lower the trash holder.


n Folding down the second seats


Swing the bottom cushion up by pulling the lock release strap.


46


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 47 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Push the lock release button and fold down the seatback.


Tumbling the second seats (vehicles with third seats)


n Before tumbling second seats


Adjust the head restraint to the downmost position.


Stow the second seat belt buck- les.


47


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 48 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Tumbling the second seats


Pull the lever to unlock the seat- back and then fold the seatback down.


Swing the whole seat up and for- ward until they are locked.


n When returning the second seats


Push the knob to unlock the seat and swing the whole seat down.


48


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 49 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Swing the seatback up.


Folding up the third seats (vehicles with third seats)


n Before folding up the third seats


Adjust the head restraint to the downmost position.


Stow the third seat belt buckles.


49


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 50 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Folding up the third seats


Pass the seat belts through the seat belt hangers.


This prevents the shoulder belt from being damaged. Make sure that the seat belts are removed from the hangers before using them.


Fold down third seat by pushing the lock release lever forward.


Unlock the seat leg by pulling the handle. Swing the whole seat up and sideward.


50


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 51 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Retract the seat leg. Take the holding strap out and attach the strap to the assist grip.


Pull the free end of the strap then fix it with the hook-and-loop fastener.


Remove the seat anchor cov- ers from the back of the seat cushion. Install the seat anchor covers over the seat anchors.


n Returning the third seats


Reverse the steps of folding up the third seats. (→P. 49)


51


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 52 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Removing the third seats (vehicles with third seats)


n Before removing the third seats


Adjust the head restraint to the downmost position.


Stow the third seat belt buckles.


Pass the seat belts through the seat belt hangers.


This prevents the shoulder belt from being damaged. Make sure that the seat belts are removed from the hangers before using them.


52


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 53 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Removing the third seats


Fold down the third seat by pushing the lock release lever forward.


Unlock the seat leg by pulling the handle. Lift the whole seat up. Retract place the seat on the floor.


the seat


then


leg,


Remove the seat lock cover. Push the seat lock release lever outward to unlock the seat lock. Pull up the whole seat and remove it. Reinstall the seat lock cover.


Remove the seat anchor cov- ers from the back of the seat cushion. Install the seat anchor covers over the seat anchors.


53


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 54 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Reinstalling the third seat (vehicles with third seat)


Remove the seat anchor cov- ers. Install the seat anchor covers in the back of the seat cush- ion.


Hold the seat and engage the seat striker to the seat lock, then place the seat on the floor. Press down the seatback to securely lock the seat to the body.


Reinstall the seat lock cover. Reverse STEP1 and STEP2 of removing the third seat. (→P. 53)


54


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 55 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n If you cannot raise the seatback (second seats)


Vehicles without third seats


Release the seat belt lock by:


Pushing on the lower front edge of the seatback to slacken the seat belt. Let the seat belt retract a little.


Vehicles with third seats


Release the seat belt lock by:


Pushing on the lower front edge of the seatback to slacken the seat belt. Let the seat belt retract a little.


n Waterproof and water-repellent seats (vehicles with off-road package) Waterproof and water-repellent seats are installed in your vehicle; however, the water-repellent effect does not last forever.


CAUTION


n Reclining adjustment (vehicles with third seats)


Do not recline the seat more than necessary when the vehicle is in motion, to reduce the risk of sliding under the lap belt. If the seat is too reclined during an accident, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury.


n Before folding down or tumbling a rear seats


Do not fold down a rear seat when there are passengers sitting in the rear seats or when there is luggage placed on/under the rear seats.


55


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 56 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n When the seatback is folded


Do not sit on or place anything on the seatback while driving.


n When folding down, tumbling, folding up or removing the seats


l Do not fold down, tumble, fold up or remove the seat while the vehicle is


moving.


l Be careful not to get your hands or feet pinched in the seat. l Make sure the seats are securely locked. Failure to do so will prevent the


seat belt from operating properly.


When removing the third seats: l Do not leave the removed seat loose in the vehicle. l Be careful not to hit a person with the removed seat or drop it on yourself. l Do not sit on or place anything on the removed seat.


n When returning or reinstalling the seats


l Do not return or reinstall the seat while the vehicle is moving. l Be careful not to get your hands or feet pinched in the seat. l Make sure the seats are securely locked. Failure to do so will prevent the


seat belt from operating properly.


l Check that the seat belts are not twisted or caught under the seat. l Arrange the seat belts in the proper positions for ready use. When reinstalling the third seats:


Install each seat in the same position from which it was removed. Failure to do so will prevent third seat occupants from using the seat belts prop- erly.


n When removing or folding up the third seats


Be sure to install the seat anchor covers on the seat anchors, or you may get burned when they become hot.


n When folding up the third seats


Fix the seats securely by adjusting the length of the holding strap. Failure to do so may cause death or serious injury in the event of an accident or sud- den braking.


56


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 57 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


NOTICE


n Before tumbling, folding up or removing the seats


The seat belts and buckles must be stowed.


n Removed third seats (vehicles with third seats)


Avoid putting heavy loads on the seat. The metallic tips of the seat leg may be damaged, and you may be unable to correctly reinstall the seat.


57


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 58 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Driving position memory system (if equipped)


Your preferred driving position (the position of the driver’s seat) can be entered into the computer’s memory and recalled with the touch of a button. Two different driving positions can be entered into memory. n Entering a position into memory


Check that the shift lever is set in P.


Turn the engine switch to the ON position. Adjust the driver’s seat to the desired positions.


While pushing the SET button, push button “1” or “2” until the signal beeps.


If the selected button has already been preset, the previ- ously recorded position will be overwritten.


n Recalling the memorized position


Check that the shift lever is set in P.


Turn the engine switch to the ON position.


Push button “1” or “2” to recall the desired position.


58


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 59 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Retained accessory power


Each memorized position can be activated within 30 seconds after the driver’s door is opened, even if the key is not in the engine switch.


n If any position memory button is pushed while the adjustments are


being made The operation will stop. To reactivate the system, push the button (“1” or “2”) again.


n If the battery is disconnected


The memorized positions must be reset because the computer’s memory is erased when the battery is disconnected.


CAUTION


n Seat adjustment caution


Take care during seat adjustment that the seat does not strike the rear pas- senger or squeeze your body against the steering wheel. If this happens, you can stop the movement by pressing another seat posi- tion memory button.


59


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 60 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints


n Adjusting the head restraints


Front seats


Vertical adjustment


Up Down Push and hold the lock release button when lowering the head restraint.


Angle adjustment


Lock release button


Second seats (vehicles without third seats)


Vertical adjustment


Up Down Push and hold the lock release button when lowering the head restraint.


Lock release button


60


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 61 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Second seats (vehicles with third seats)


Vertical adjustment


Up Down Push and hold the lock release button when lowering the head restraint.


Vertical adjustment


Up Down Push and hold the lock release button when lowering the head restraint.


Pull the head restraint up while pushing the lock release button.


Lock release button


Third seats


Lock release button


n Removing the head restraints


61


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 62 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Adjusting the height of the head restraints


Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.


n Adjusting the rear seat head restraints (vehicles without third seats) or center second seat head restraint and third seat head restraints (vehi- cles with third seats) Always raise the head restraint one level from the stowed position when using.


CAUTION


n Head restraint precautions


Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. l Use the head restraints designed for each respective seat. l Adjust the head restraints to the correct position at all times. l Do not drive with the head restraints removed.


62


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 63 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts


Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. n Correct use of the seat belts


l Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoul- der.


l Position the lap belt as low


as possible over the hips.


l Adjust the position of the seatback. Sit up straight and well back in the seat. l Do not twist the seat belt.


n Fastening and releasing the seat belt


Fastening the belt


Push the tab into the buckle until a clicking sound is heard.


4RUNNER_U_(L/O_0808)


63


4RUNNER_U.book Page 64 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Adjusting the height of the belt


Releasing the belt


Press the release button.


Down Push the lock release knob and slide the height adjuster down. Up Move the height adjuster up as needed until you hear a click.


Seat belt pretensioners (front seats)


The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision or a vehicle rollover.


The pretensioner may not acti- vate in the event of a minor frontal impact, a side impact or a rear impact.


64


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 65 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Emergency locking retractor (ELR)


The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.


n Automatic locking retractor (ALR)


When a passenger’s shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (→P. 117)


n Pregnant women


Obtain medical advice and wear the seat belt in the proper way. (→P. 63) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. Extend the shoulder belt com- pletely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only a pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a collision.


n People suffering illness


Obtain medical advice and wear the seat belt in the proper way.


65


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 66 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Child seat belt usage


The seat belts of your vehicle were principally designed for persons of adult size. l Use a child restraint system appropriate for the child, until the child become large enough to properly wear the vehicle’s seat belt. (→P. 113) l When the child becomes large enough to properly wear the vehicle’s


seat belt, follow the instructions on P. 63 regarding seat belt usage.


n Replacing the belt after the pretensioner has been activated


If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent colli- sions.


n Seat belt extender


If your seat belts cannot be fastened securely because long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.


they are not


CAUTION


Observe the following precautions to reduce the risk of injury in the event of sudden braking or an accident. Failing to do so may cause death or severe injury. n Wearing a seat belt


l Ensure that all passengers wear a seat belt. l Always wear a seat belt properly. l Each seat belt should be used by one person only. Do not use a seat belt


for more than one person at once, including children.


l Toyota recommends that children be seated in the rear seat and always


use a seat belt and/or an appropriate child restraint system.


66


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 67 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Wearing a seat belt


l Do not recline the seat any more than necessary to achieve a proper seat- ing position. The seat belt is most effective when the occupants are sitting up straight and well back in the seats.


l Do not wear the shoulder belt under your arm. l Always wear your seat belt low and snug across your hips.


n Adjustable shoulder anchor


Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause death or serious injuries in a collision. (→P. 64)


n Seat belt pretensioners


l Do not place anything, such as a cushion, on the front passenger’s seat. Doing so will disperse the passenger’s weight, which prevents the sensor from detecting the passenger’s weight properly. As a result, the seat belt pretensioner for the front passenger’s seat may not activate in the event of a collision. If the pretensioner has activated, the seat belt becomes locked: it cannot be further extended, nor will it return to the stowed position. The seat belt cannot be used again and must be replaced at your Toyota dealer.


n Child restraint lock function belt precaution


Do not allow children to play with the child restraint lock function belt. If the belt becomes twisted around a child’s neck, it will not be possible to pull the belt out leading to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.


n Seat belt damage and wear


l Do not damage the seat belts by allowing the belt, plate, or buckle to be


jammed in the door. Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belt cannot protect an occupant from death or serious injury.


67


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 68 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Seat belt damage and wear


l Ensure that the belt and tab are locked and the belt is not twisted.


If the seat belt does not function correctly, immediately contact your Toyota dealer.


l Replace the seat assembly, including the belts, if your vehicle has been


involved in a serious accident, even if there is no obvious damage.


l Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury.


n Using a seat belt extender


l Do not wear the seat belt extender if you can fasten the seat belt without


the extender.


l Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.


l The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended.


NOTICE


n When using a seat belt extender


When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.


68


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 69 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel


The steering wheel can be adjusted to a comfortable position. n Tilt steering wheel


to


the


steering the


Hold wheel and pull lever. Adjust ideal position by moving the steering wheel verti- cally. Release the lever.


the


n Telescopic steering wheel (if equipped)


the


Hold steering wheel and press the lever down. Adjust ideal to position by moving the steering wheel hori- zontally. Pull the lever up.


the


CAUTION


n Caution while driving


Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury.


n After adjusting the steering wheel


Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.


69


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 70 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror


Glare from the headlights of vehicles behind can be reduced by using the following functions.


Manual anti-glare inside rear view mirror


Normal position Anti-glare position


70


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 71 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light.


Press the button for longer than 3 seconds to turn auto mode ON/OFF.


The indicator comes on when automatic mode is turned on. The mirror will revert to the automatic mode each time the engine switch is turned on.


n To prevent sensor error (vehicles with auto anti-glare inside rear view


mirror)


To ensure that the sensors operate prop- erly, do not touch or cover them.


71


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 72 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Caution while driving


Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.


72


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 73 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors


Mirror angle can be adjusted.


Select a mirror to adjust.


(L: left or R: right)


Adjust the mirror up, down, in or out using the switch.


Folding back the mirrors


Push backward to fold the mir- rors.


73


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 74 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


n Mirror operating conditions


The engine switch is in the ACC or ON position.


n When the mirrors are fogged up (vehicles with outside rear view mirror


defoggers) Turn on the mirror defoggers to defog the mirrors. (→P. 240)


n Rain clearing mirrors


The rain clearing mirrors have been coated to spread the raindrops evenly into a thin film (hydrophilic effect) when they adhere to the mirror surface, clearing the driver’s rear view.


n In the following cases, the rain clearing effect will be reduced tempo- rarily, but will recover by exposing the mirrors to bright direct sunlight for 1 or 2 days l After wiping dirt off the mirrors l When the mirrors fog up l After waxing your vehicle in an automatic car wash l After your vehicle has been parked for a long period in a place with no


direct sunlight, such as under ground parking lots


CAUTION


n When driving the vehicle


Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. l Do not adjust the mirrors while driving. l Do not drive with the mirrors folded back. l Both the driver and passenger side mirrors must be extended and properly


adjusted before driving. n When a mirror is moving


To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror.


74


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 75 Wednesday, July 30, 2008 3:00 PM


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n When the mirror defoggers are operating (vehicles with outside rear


view mirror defoggers) Do not touch the rear view mirror surfaces, as they can become very hot and burn you.


NOTICE


n If ice should jam the mirror


Do not operate the control or scrape the mirror face. Use a spray de-icer to free the mirror.


n When the mirror surfaces freeze (vehicles with mirror defoggers)


To maintain the rain clearing effect, do not scrape any ice off the mirrors using any objects such as a piece of plastic but instead pour warm water or operate the mirror defoggers to melt the ice.


75


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 76 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof Power windows


The power windows can be opened and closed using the following switches.


One-touch closing* (driver’s window only) Closing One-touch opening* (driver’s window only) Opening *: Pressing


the switch


the opposite direction will stop win- dow travel partway.


in


76


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 77 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof


Lock switch


Press the switch down to lock passenger window switches and back window switch.


Use this switch to prevent chil- dren from accidentally opening or closing a passenger window and back window.


n The power windows can be operated when


The engine switch is in the ON position.


n Operating the power windows after turning the engine switch off


The power windows can be operated for approximately 43 seconds even after the engine switch is turned off. They cannot, however, be operated once either front door is opened.


n Jam protection function (driver’s window only)


If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.


77


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 78 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof


n When the battery is disconnected


The power windows must be initialized in order to ensure proper operation. (driver’s window only)


Open the window halfway. Fully close the window by pulling the switch up and continue hold- ing the switch for 1 second.


CAUTION


n Closing the windows


Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their body


in a position where it could be caught when a window is being operated.


l Do not allow children to operate the power windows.


Closing a power window on someone can cause serious injury, and in some instances, even death.


n Jam protection function


l Never try jamming any part of your body to activate the jam protection


function intentionally.


l The jam protection function may not work if something gets caught just


before the window fully closes.


78


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 79 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof Power back window


The power back window can be opened and closed using the switch and key.


From inside


One-touch closing* Closing Opening One-touch opening* the switch


*: Pressing


the opposite direction will stop win- dow travel partway.


in


From outside


Opening Closing Turn the key fully and hold it.


4RUNNER_U_(L/O_0808)


79


4RUNNER_U.book Page 80 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof


n The power back window can be operated when


l The engine switch is in the ON position. l The power back window can be opened when the rear window wiper is working. At that time, the wiper stops working until the window is closed again. If the rear window is not fully closed, the rear window wiper, washer, and defogger will not work.


n Operating the power back window after turning the engine switch off


The power back window can be operated for approximately 43 seconds even after the engine switch is turned off. It cannot, however, be operated once either front door is opened.


n Jam protection function


If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.


n When the battery is disconnected


The power windows must be initialized in order to ensure proper operation.


Open the window halfway. Fully close the window by pulling the switch up and continue hold- ing the switch for 1 second.


n Customization that can be configured at Toyota dealer


Settings (e.g. wireless remote control linked operation) can be changed. (Customizable features →P. 495)


80


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 81 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof


CAUTION


n Caution while driving


Keep the back door and back window closed. This not only keeps the luggage from being thrown out but also prevents exhaust gases from entering the vehicle.


n Closing the power back window Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their body


in a position where it could be caught when a window is being operated.


l Do not allow children to operate the power back window.


Closing a power back window on someone can cause serious injury, and in some instances, even death.


n Jam protection function


l Never try jamming any part of your body to activate the jam protection


function intentionally.


l The jam protection function may not work if something gets caught just


before the window fully closes.


81


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 82 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof Moon roof (if equipped)


Use the overhead switches to open, close, and tilt the moon roof up and down. n Opening and closing


n Tilt up and down


Open Close To stop partway, press the switch lightly.


Tilt up Tilt down To stop partway, press the switch lightly.


82


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 83 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof


n The moon roof can be operated when The engine switch is in the ON position.


n Operating the moon roof after turning the engine switch off


The moon roof can be operated for approximately 43 seconds even after the engine switch is turned off. It cannot, however, be operated once either front door is opened.


n Jam protection function


If an object is detected between the moon roof and the frame while clos- ing, travel is stopped and the moon roof opens slightly. If an object is detected between the moon roof and the frame while tilting down, travel is stopped and the moon roof opens fully.


n Sunshade


The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened.


n When the battery is disconnected


The moon roof must be initialized in order to ensure proper operation


Push and hold the switch on the TILT UP side until the moon roof tilts all the way up and then tilts down a little automatically. To ensure the initialization is complete, make sure automatic open- ing and closing functions work properly.


83


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 84 Wednesday, July 30, 2008 3:00 PM


1-4. Opening and closing the windows and moon roof


CAUTION


n Opening the moon roof


Observe the following precautions. Failing to do so may cause death or serious injury. l Do not allow any passengers to put their hands or heads outside the vehi-


cle while it is moving.


l Do not sit on top of the moon roof.


n Closing the moon roof


Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their bod- ies in a position where they could be caught when the moon roof is being operated.


l Do not allow children to operate the moon roof.


Closing the moon roof on someone can cause death or serious injury.


n Jam protection function


l Never try jamming any part of your body to activate the jam protection


function intentionally.


l The jam protection function may not work if something gets caught just


before the moon roof fully closes.


84


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 85 Wednesday, July 30, 2008 3:00 PM


1-5. Refueling Opening the fuel tank cap


Perform the following steps to open the fuel tank cap. n Before refueling the vehicle


Turn the engine switch off and ensure that all the doors and win- dows are closed.


n Opening the fuel tank cap


Pull the fuel filler door lever.


To remove the fuel tank cap, turn the cap counterclockwise by 90 degrees ( ), and then it an additional 30
turn degrees ( ). Pause slightly before removing it.


Hang the fuel tank cap on the back of the fuel filler door.


85


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 86 Wednesday, July 30, 2008 3:00 PM


1-5. Refueling


Closing the fuel tank cap


When replacing the fuel tank cap, turn it until a clicking sound is heard.


n Fuel types


Use unleaded gasoline. (Octane rating 87 [Research Octane Number 91] or higher)


n Fuel tank capacity


Approximately 23.0 gal. (87.0 L, 19.1 Imp. gal.)


CAUTION


n Refueling the vehicle


Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. l Touch the vehicle or some other metal surface to discharge any static


electricity. Sparks resulting from discharging static electricity may cause the fuel vapors to ignite.


l Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Wait until the sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel may spray out of the filler neck and cause injury.


l Do not allow anyone that has not discharged static electricity from their


bodies to come close to an open fuel tank.


86


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 87 Wednesday, July 30, 2008 3:00 PM


1-5. Refueling


CAUTION


n Refueling the vehicle


l Do not inhale vaporized fuel.


Fuel contains substances that are harmful if inhaled.


l Do not smoke while refueling the vehicle.


Doing so may cause the fuel to ignite and cause a fire.


l Do not return to the vehicle or touch any person or object that is statically


charged. This may cause static electricity to build up, resulting in a possible ignition hazard.


n When replacing the fuel cap


Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.


NOTICE


n Refueling


Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface.


n To prevent damage to the fuel filler door


Do not apply excessive force.


87


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 88 Wednesday, July 30, 2008 3:00 PM


1-6. Theft deterrent system Engine immobilizer system


The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle.


The indicator flashes after the key has been removed from the engine switch to indicate that the system is operating.


n System maintenance


The vehicle has a maintenance-free type of engine immobilizer system.


n Conditions that may cause the system to malfunction


If the key is in contact with a metallic object If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle


n Certifications for the engine immobilizer system


For vehicles sold in U.S.A.


This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.


88


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 89 Wednesday, July 30, 2008 3:00 PM


1-6. Theft deterrent system


For vehicles sold in Canada


This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.


NOTICE


n To prevent damage to the key


Do not modify, remove or disable the engine immobilizer system. If any unauthorized changes or modifications are made, the proper operation of the system cannot be guaranteed.


89


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 90 Wednesday, July 30, 2008 3:00 PM


1-6. Theft deterrent system Alarm (if equipped)


The system sounds the alarm and flashes lights when forcible entry is detected. n Triggering of the alarm


The alarm is triggered in the following situations. l A locked door is unlocked or opened in any way other than using the wireless remote control door lock function or key. The doors will lock again automatically.


l The hood is opened while the vehicle is locked. l The battery is reconnected.


n Setting the alarm system


Close the doors and hood, and lock all doors using the wireless remote control or key. The system will be set auto- matically after 30 seconds.


The indicator changes from being on to flashing when the system is set.


n Deactivating or stopping the alarm


l Unlock the doors using the wireless remote control or key. l Turn the engine switch to the ON position.


(The alarm will be deactivated or stopped after a few sec- onds.)


90


4RUNNER_U_(L/O_0808)


1


4RUNNER_U.book Page 91 Wednesday, July 30, 2008 3:00 PM


1-6. Theft deterrent system


n Items to check before locking the vehicle


To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following. l Nobody is in the vehicle. l The windows and moon roof are closed before the alarm is set. l No valuables or other personal items are left in the vehicle.


n Triggering of the alarm


The alarm may be triggered in the following situations. (Stopping the alarm deactivates the system.) l A person inside the vehicle opens a door or hood. l The battery is recharged or replaced when the vehicle is locked.


n Panic mode


→P. 29


n When the battery is disconnected Be sure to cancel the alarm system. If the battery is discharged before canceling the alarm, the system may be triggered when the battery is reconnected.


91


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 92 Wednesday, July 30, 2008 3:00 PM


1-6. Theft deterrent system Theft prevention labels (U.S.A.)


These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.


92


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 93 Wednesday, July 30, 2008 3:00 PM


1-7. Safety information Correct driving posture


Drive in a good posture as follows:


and to


Sit upright and well back in the seat. (→P. 41) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed the extent required. (→P. 41) Adjust the seatback so that the controls are easily oper- able. Adjust the tilt and telescopic positions of the steering wheel downward so the air- bag is facing your chest. (→P. 69) Lock the head restraint in place with the center of the head restraint closest to the top of your ears. (→P. 60) Wear the seat belt correctly. (→P. 63)


4RUNNER_U_(L/O_0808)


93


4RUNNER_U.book Page 94 Wednesday, July 30, 2008 3:00 PM


1-7. Safety information


CAUTION


n While driving


l Do not adjust the position of the driver’s seat while driving.


Doing so could cause the driver to lose control of the vehicle.


l Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.


l Do not place anything under the front seats.


Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an acci- dent. The adjustment mechanism may also be damaged.


n Adjusting the seat position


l Take care when adjusting the seat position to ensure that other passen-


gers are not injured by the moving seat.


l Do not put your hands under the seat or near the moving parts to avoid


injury. Fingers or hands may become jammed in the seat mechanism.


94


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 95 Wednesday, July 30, 2008 3:00 PM


1-7. Safety information SRS airbags


The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.


95


Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas- senger from impact with interior components. Side and curtain shield airbags Side airbags Can help protect the torso of the front seat occupants. Curtain shield airbags Can help protect primarily the head of front seat occupants and second seat occupants.


4RUNNER_U_(L/O_0808)


4RUNNER_U.book Page 96 Wednesday, July 30, 2008 3:00 PM


1-7. Safety information


Airbag system components


Side airbags AIR BAG ON and AIR BAG OFF indicator lights Curtain shield airbags Front passenger airbag Side and curtain shield air- bag sensors

Loading...
x