2008 Toyota 4runner Owners Manual

Z18012

Z18011

You can select the menu for the disc by the joystick and the “ENT” button on the controller.

257

07 12.25

Z18013

258

”

”, “AA”

switch/button: This

OPERATING THE “" ”, “ AND “""” SWITCHES/BUTTONS “" ” switch/button: Push this switch/but- ton to pause the disc or to cancel the pause and return to normal playing. “ switch/button stops a screen when the DVD player is operated. “AA” and “""” switches/buttons: Push and hold the “AA” or “""” switch/button to fast forward or reverse. When you re- lease the switch/button, the DVD player will resume playing. Push the “""” switch/button while paus- ing, the DVD video plays the slow−motion video replay.

Z17409

07 12.25

SKIPPING TO THE PREDETERMINED SCREEN To skip to the predetermined screen, push the “Return” switch. The DVD player starts playing from the beginning of the predeter- mined screen. For the predetermined screen, see the separate manual for the DVD disc.

further details of

SELECTING THE TITLE To display the searching title screen, push the “Search” switch on the screen. You can also display the screen by pushing the “SEARCH” button on the controller.

Z17410

259

07 12.25

Z17411

the

the “ENT” button

title number by using

the Select joystick and push to enter the number. The player starts play- ing disc for that title number. The selected title number will appear on the screen. Push the “Back” switch to return to the menu screen.

260

CHANGING THE SUBTITLE LANGUAGE Push the “Sub Title” switch on the screen, and then the changing subtitle language screen will appear. You can also display the screen by pushing the “SUB TITLE” button on the controller.

Z17413

07 12.25

Z17414

Z17415

Each time you push the “Sub Title” switch, another language stored on the disc is selected. To turn off the subtitles, push the “Hide Buttons” switch. Push the “Back” switch to return to the previous screen. The selected subtitle language will appear on the screen.

CHANGING AUDIO LANGUAGE the “Audio” switch on the screen Push then language and screen will appear. You can also display the screen by pushing the “AUDIO” button on the controller.

the changing audio

261

07 12.25

Z17416

turn off

the audio

language screen,

Each time you push the “Audio” switch, another language stored on the disc is selected. To push the “Hide Buttons” switch. Push the “Back” switch to return to the previous screen. DVD video— The selected audio language will appear on the screen.

262

CHANGING ANGLE SCREEN Push the “Angle” switch on the screen, and then the changing angle screen will appear. You can also display the screen by pushing the “ANGLE” button on the controller.

Z17417

07 12.25

Z17418

The angle can be selected for discs that are multi−angle compatible when the “ ” mark appears on the screen. Each time you push the “Angle” switch, the angle changes. The angle number which you can select will appear on the screen. To turn off the screen, push the “Hide Buttons” switch. Push the “Back” switch to return to the previous screen.

Z17419

CHANGING THE INITIAL SETTING Push the “Set Up” switch on the screen, and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. After the setting is done, the player plays from the beginning of the chapter or the track.

263

07 12.25

Z18017

Z18018

Z18019

Setup Menu screen

“Enter” switch. The

There are initial setting switches on the “Setup Menu” screen. After you change the initial setting, push the initial setting switch will be turned off and return to the picture previously. When the “Default” switch is pushed, all menus are initialized.

264

the

the appropriate switch on

CHANGING THE AUDIO LANGUAGE Push the “Audio Language” switch on the “Setup Menu” and “Select Audio Lang.” screen appears. Select the language you want to hear by pushing the screen. To return push the “Back” switch. If you cannot find the language you want to hear, push the “Others” switch. The “Enter Audio Lang. Code” screen will ap- pear.

the “Setup Menu” screen,

to

To select an audio language, use the joys- tick to enter the appropriate 4−digit lan- guage code. For details of the language codes, see the language code list. If a code which is not on the list is en- tered and the “ENT” button is pushed, the “Incorrect Code” screen will appear. Enter the code of the language you want to hear again. To screen, push the “Back” switch.

“Select Audio Lang.”

return

the

to

07 12.25

Z18020

Z18021

Z18022

the

the

the appropriate switch on

CHANGING THE SUBTITLE LANGUAGE “Select Subtitle Lang.” To display screen, push “Subtitle Language” switch on the “Setup Menu” screen. Select the language you want to read by pushing the screen. To return push the “Back” switch. If you cannot find the language you want to read, push the “Others” switch. The “Enter Subtitle Lang. Code” screen will appear.

the “Setup Menu” screen,

to

To enter the code of the language you want to read, use the joystick to enter the appropriate 4−digit language code. For de- tails about the language codes, see the language code list. Push the “ENT” button on the controller. If numbers which are not on the list are entered and the “ENT” button is pushed, the “Incorrect code” screen will appear. Enter the language code you want to read again. To return to the “Select Subtitle Lang.” screen, push the “Back” switch on the screen.

CHANGING THE DVD LANGUAGE To display the “Select DVD Lang.” screen, push the “DVD Language” switch on the “Setup Menu” screen. Select the language you want to read on the screen. To return push the “Back” switch. If you cannot find a language you want to read, push the “Others” switch. The “Enter DVD Lang. Code” screen will appear.

the “Setup Menu” screen,

to

265

07 12.25

Z18023

Z18024

Z18025

TURNING THE ANGLE MARK ON OR OFF The angle mark can be turned on discs that are multi−angle compatible. Each switch on turns on or off alternately.

the “Angle Mark” the angle mark

time you push

the screen,

for

To enter the code of the language you want to read, use the joystick to enter the appropriate 4−digit language code. For de- tails about the language codes, see the language code list. Push the “ENT” button on the controller. If numbers which are not on the list are entered and the “ENT” button is pushed, the “Incorrect code” screen will appear. Enter the language code you want to read again. To to screen, push screen.

the “Select DVD Lang.” the “Back” switch on the

return

266

OF

LEVEL

VIEWER

SETTING RESTRICTIONS You can restrict the play back screen by setting the viewer restrictions. You can prevent the restriction with a password. Some discs do not supply a restriction. To set the level of viewer restriction, push the “Parental Lock” switch on the “Setup Menu” screen. The “Enter Personal Code” screen will appear.

07 12.25

Z18026

Z18027

SETTING THE DISPLAY MODE Pushing the “SIZE” button on the control- ler causes the display modes to change sequentially as follows:

Normal

Wide1

Wide2

Enter the password and push the “ENT” button. The “Select Restriction Level” screen will appear. You cannot change the setting without in- putting the password. When you forget or change the password, push the “A” side of the joystick ten times to initialize the password. To return push the “Back” switch.

the “Setup Menu” screen,

to

Push a parental level (1—8). The smaller the level number, the stricter the age limit. Push the “Back” switch to return to the “Setup Menu” screen.

267

07 12.25

LANGUAGE CODE LIST

Language

Japanese

English

French

German

Italian

Spanish

Chinese

Dutch

Portuguese

Swedish

Russian

Korean

Greek

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Code

1001

0514

0618

0405

0920

0519

2608

1412

1620

1922

1821

1115

0512

0101

0102

0106

0113

0118

0119

268

0125

0126

0201

0205

0207

0208

0209

0214

0215

0218

0301

0315

0319

0325

0401

0426

0515

0520

0521

0601

0609

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Esperanto

Estonian

Basque

Persian

Finnish

0610

0615

0625

0701

0704

0712

0714

0721

0801

0809

0818

0821

0825

0901

0905

0911

0914

0919

0923

1009

1023

Fiji

Faroese

Frisian

Irish

Scots−Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

Javanese

07 12.25

1101

1111

1112

1113

1114

1119

1121

1125

1201

1214

1215

1220

1222

1307

1309

1311

1312

1314

1315

1318

1319

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

1320

1325

1401

1405

1415

1503

1513

1518

1601

1612

1619

1721

1813

1814

1815

1823

1901

1904

1907

1908

1909

Maltese

Burmese

Nauru

Nepali

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Polish

Pashto, Pushto

Quechua

Rhaeto−Romance

Kirundi

Romanian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo−Croatian

Sinhalese

1911

1912

1913

1914

1915

1917

1918

1919

1920

1921

1923

2001

2005

2007

2008

2009

2011

2012

2014

2015

2018

Slovak

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

269

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Wolof

Xhosa

Yoruba

Zulu

07 12.25

2019

2020

2023

2111

2118

2126

2209

2215

2315

2408

2515

2621

270

USING THE CONTROL SCREEN When playing a disc, push the “DVD” but- ton on the controller. The status screen will appear on the screen.

Z17464

SELECTING THE CHAPTER/TRACK the To select or “CHAPTER/TRACK the “CHAPTER/TRACK controller the chapter/track you want to select appears on the screen.

the chapter/track, push button ” button on of

number

until

the

”

07 12.25

—DVD player operation (video CD/audio CD/CD text/MP3)

Z17489

Z17433

Z18014

SELECTING THE DISC MENU NUMBER (video CD only) Push the “Select Number” switch and then the disc menu number search screen will appear. You can also display the screen by pushing the “SEARCH” button on the controller.

the disc

Enter the disc menu number by using the joystick and push the “ENT” button. The player starts playing the entered disc menu number. The entered disc menu number will appear on the screen. Push the “Back” switch to return to the menu screen.

from

“""” switches: Push

OPERATING THE “" ”, “AA” AND “""” SWITCHES (video CD only) “" ” switch: Push this switch to pause the disc or to cancel the pause and return to normal playing. “AA” and this switch to fast forward or reverse. If you want the current track, release the switch. Video CD only— Push the “""” switch/button while paus- ing, the DVD video plays the slow−motion video replay.

the beginning of

to return to

271

07 12.25

Z17435

Z17490

Z18006

TURNING ON THE DISC MENU (video CD only) Push the “Return” switch to turn on the menu screen for the disc. For the operation of the menu screen, see the manual for the video CD.

CHANGING MENU PAGE OR TRACK (video CD only) Push the “Next Menu” or “Prev. Menu” switch while the disc menu is displayed. The next or previous page will appear on the screen. Push the “Next Menu” or “Prev. Menu” switch while the player is playing video. The next or previous track will be searched and played.

272

MULTIPLEX

CHANGING TRANSMISSION (video CD only) Push the “Main/Sub” switch to change a multiplex transmission. The mode changes from Main/Sub to Main to Sub and back to Main/Sub by pushing the “Main/Sub” switch.

07 12.25

CHANGING THE INITIAL SETTING (video CD only) Push the “Set Up” switch on the screen and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. (See “CHANGING THE INITIAL SETTING” on page 263 in this Section for details.) After the setting is done, the player plays from the beginning of the chapter or the track.

Z18028

Z18029

CD Text

CD MP3

USING THE CONTROL SCREEN When playing a disc, push the “DVD” but- ton on the controller. The control screen will appear on the screen. CD text only— The disc title and track title will appear on the screen when pushing the “DVD” but- ton. Details of the specific switches, controls and features are described below. 1. “RPT” switch (audio CD and CD text) Push the “RPT” switch while the track is playing. When the track ends, it will automatically replay. To turn off the re- peat feature, push this switch again.

2. “RAND” switch (audio CD and CD text) Push the “RAND” switch. The player will play the tracks on the disc in ran- dom order. To turn off the random fea- ture, push this switch again.

3. “SCAN” switch (audio CD and CD text) Push the “SCAN” switch. The player will scan all the tracks on the disc. To stop scanning, push this switch again. When the player has scanned all the tracks on the disc, it will stop scan- ning.

273

—Screen adjustment You can adjust the color, contrast, tone and brightness of the screen. Push the “DISPLAY” button on the control- ler and the “Display” screen will appear. The screen may turn purple to deflect the sunlight. This is not a malfunction.

07 12.25

MP3 only— Folder and file names will appear on the screen when the “DVD” button is pushed. The details of the specific switches, con- trols, and features are described below. 1. “RPT” switch

When the “RPT” switch is pushed while a track is played, the track file will be is played repeatedly until pushed again. When is pushed for at least 0.8 seconds, all the files in a folder will be played repeat- edly. To turn off repeat play mode, push the switch again.

the switch the switch

2. “RAND” switch

in

files

in a current

the “RAND” switch

random order. When

is pushed, When folder will be the played the switch is pushed for at least 0.8 sec- onds, all the files in the disk will be played in random. To turn off random play mode, push the switch again.

274

3. “SCAN” switch

the

files

in a current

When the “SCAN” switch is pushed, all the folder will be scanned. Only the first 10 seconds of each file are played sequentially until all files are scanned. When the switch is pushed for at least 0.8 sec- onds, the first 10 seconds of each ini- tial file of all the folders in the disk will be played sequentially until the entire initial files are scanned. To stop scan- ning, push the switch again.

4. “FLD

” switch

When the switch is pushed, the initial file of the next folder will be played.

5. “

FLD” switch

When the switch is pushed, the initial file of folder will be played.

the previous

6. “DETAIL” switch

the switch

When is pushed while a track is played, the detailed file infor- mation of the track will be displayed.

07 12.25

After adjusting the screen, push the “ENT” button or “DISPLAY” button to return to the previous screen.

—Selecting the video mode

Z18030

Z17478

Operate the joystick up and down to se- lect Brightness, Contrast, Tone, or Color and left and right to make adjustments.

− or “Red”

+ or “Green”

Brightness

Darkens

Brightens

Contrast

Tone

Color

Weakens the contrast

Strengthens the contrast

Weakens the tone

Strengthens the red color

Strengthens the tone

Strengthens the green color

The audio machine connected to the input terminal adapter can be played the video mode. To select “VIDEO” button on the controller.

the video mode, push

the

in

275

07 12.25

—DVD video disc information DVD PLAYER AND DVD VIDEO DISCS This DVD player conforms to NTSC col- or TV formats. DVD video discs con- forming to other formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating where you can use. If the DVD video disc is not labeled “ALL” or “1”, you cannot use it in this DVD player. If you attempt to play an inappropriate DVD video disc in this play- er, “REGION CODE ERROR” appears on the screen. Even if the DVD video disc does not have a region code, in some cases you cannot use it.

276

Marks shown on DVD video discs:

Indicates NTSC format of color TV.

Indicates the number of audio tracks.

Indicates the number of language subtitles.

Indicates the number of angles.

Indicates the screen to be selected. Wide screen: 16:9
Standard: 4:3

Indicates regions in which this video disc can be played. ALL: all countries Number: region code

DVD VIDEO DISC GLOSSARY DVD video discs: Digital Versatile Disc that holds video. DVD video discs have adopted “MPEG2”, one of the world stan- dards of digital compression technologies. The picture data is compressed by 1/40
on average and stored. Variable rate en- coded technology in which the volume of data assigned to the picture is changed depending on the picture format has also been adopted. Audio data is stored using PCM and Dolby digital, which enables higher quality of sound. Furthermore, mul- ti−angle and multi−language features will also help you enjoy the more advanced technology of DVD video. Viewer restrictions: This limits what can be viewed in conformity with the level of restrictions of the country. The level of restrictions varies depending on the DVD video disc. Some DVD video discs cannot be played at all, or violent scenes are skipped or replaced with other scenes. Level 1: DVD video discs for children can be played. Level 2—7: DVD video discs for children and G−rated movies can be played.

feature

07 12.25

Level 8: All types of DVD video discs can be played. Multi−angle feature: You can enjoy the same scene at different angles. Multi−language feature: You can select the language of the subtitles and audio. Region codes: Region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you can- not play the disc on the DVD player. For region codes, see page 276. Audio: This DVD player can play liner PCM, Dolby digital, dts and MPEG audio format DVD. Other decoded type cannot be played. Title and chapter: Video and audio pro- grams stored on DVD video discs are di- vided in parts by title and chapter. Title: The largest unit of the video and audio programs stored on DVD video discs. Usually, one piece of a movie, one album, or one audio program is assigned as a title. Chapter: A unit smaller than a title. A title comprises plural chapters.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double−D symbol are trademarks of Dolby Laboratories. Confidential unpub- lished works. E1992−1997 Dolby Laboratories. All rights reserved. incorporates copyright This product protection technology that is protected by method claims of certain U.S. pat- ents and other intellectual property rights owned by Macrovision Corpora- tion and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Cor- poration, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. “dts” is a trademark of Digital Theater Systems, Inc.

—A/V input adapter The rear entertainment system plays vid- eos and sound when an audio−video equipment is connected to the A/V input adapter. For details, refer to the manufac- turer’s instructions.

277

07 12.25

—Power outlet

CY17030

CY17073

CY19137

To use the adapter, open the cover. The A/V input adapter is composed of 3
input adapters. Yellow: Image input adapter Red: Audio input adapter White: Audio input adapter

NOTICE

Close the cover when the A/V input adapter is not in use. Inserting a for- eign object other than the appropriate plug may cause electrical failure or short circuit.

278

it go

After plugging the cord into the adapter, let through the console box and tray. Use a cord which is thin enough to go through the gap. Close the console box lid.

the gap between the

This power outlet is designed for use as a power supply for the audio device con- nected to the A/V input adapter. The engine switch must be in the “ON” position for the power outlet to be used. The maximum capacity for this power out- let is 115 VAC/100W. If you attempt to use an appliance that requires more than 115 VAC or 100W, the protection circuit will activate and cut the power supply. The power supply will restart automatically when you use an appliance that operates within the 115 VAC/100W limits.

07 12.25

D Other appliances requiring an extremely stable power supply: microcomputer− controlled electric blankets, touch sen- sor lamps, etc.

Certain electrical appliances may cause radio noise.

CY19135

To use the power outlet, push the main switch on the instrument panel. An indicator light will illuminate to indicate that the power outlet is ready for use. Push the main switch once again to turn the power outlet off. When the power out- let is not in use, make sure that the main switch is turned off.

NOTICE

z To prevent the battery from being discharged, do not use the power outlet longer than necessary when the engine is not running.

z Close the power outlet lid when the power outlet is not in use. Inserting a foreign object other than the ap- propriate plug that fits the outlet may cause electrical failure or short circuit.

The power outlet is not designed for the following electric appliances even if their power consumption is under 115
VAC/100W. These appliances may not operate properly. D Appliances with high initial peak watt- age: cathode−ray tube type televisions, compressor−driven refrigerators, electric pumps, electric tools, etc.

D Measuring devices which process pre- cise data: medical equipment, measur- ing instruments, etc.

279

07 12.25

Audio/video system operating hints

NOTICE

To ensure correct audio/video system operation: z Be careful not to spill beverages

over the system.

z Do not put anything other than a

compact disc into the slot.

z Do not put anything other than a DVD video, video CD, dts−CD or au- dio CD into the DVD player.

z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the sys- tem which you are to. However, this does not indicate a malfunction.

listening

RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio—it is just the normal result of conditions outside the vehicle.

280

reception

In addition,

For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. conditions change constantly as your vehicle moves. Here are some common reception prob- lems that probably do not indicate a prob- lem with your radio: FM Fading and drifting stations—Generally, the effective range of FM is about 40 km (25
miles). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmit- ter. They are often accompanied by distor- tion. Multi−path—FM reflective, making it possible for two signals to reach your antenna at the same time. If this happens, the signals will cancel each oth- er out, causing a momentary flutter or loss of reception.

signals are

listening to

Static and fluttering—These occur when signals are blocked by buildings, trees, or other large objects. Increasing the bass level may reduce static and fluttering. the FM signal you Station swapping—If are interrupted or weak- is ened, and there is another strong station nearby on the FM band, your radio may tune in the second station until the origi- nal signal can be picked up again. AM Fading—AM broadcasts are reflected by the upper atmosphere—especially at night. These reflected signals can interfere with those received directly from the radio sta- tion, causing the radio station to sound alternately strong and weak. Station interference—When a reflected sig- nal and a signal received directly from a radio station are very nearly the same frequency, interfere with each other, making it difficult to hear the broad- cast. Static—AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electri- cal motors. This results in static.

they can

07 12.25

XMr∗ Alternation or modifications carried out without appropriate authorization may in- validate to operate the equipment. ∗: Use of satellite

requires XMr tuner and service. Contact your Toyota dealer for details.

the user’s right

radio

NOTICE

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These lim- its are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio commu- nications. However, there is no guar- antee that interference will not occur in a particular installation.

the

If this equipment does cause harmful interference to radio or television re- ception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an out- let on a circuit different from that to which the receiver is connected. —Consult enced radio/TV technician for help.

the dealer or an experi-

CARING FOR YOUR COMPACT DISC PLAYER, DVD PLAYER AND DISCS D Extremely high temperatures can keep your compact disc player and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the players.

D Bumpy roads or other vibrations may make your compact disc player and DVD player skip.

D If moisture gets into your compact disc player and DVD player, the players may not play even though they appear to be working. Remove the disc from the player and wait until it dries.

CAUTION

Compact disc players and DVD play- ers use an invisible laser beam which could cause hazardous radiation ex- posure if directed outside the unit. Be sure to operate the players correctly.

281

07 12.25

Audio CDs

DVD video discs

Video CDs

XS18016

Compact disc player D Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. SACD dts−CD Copy−protected CD CD−ROM

282

DVD player D Use only discs marked as shown above. The following products may not be playable on your DVD player. SACD Copy−protected CD CD−ROM DVD−R DVD+R DVD+RW DVD−RW DVD−ROM DVD−RAM

07 12.25

Z17038

Z17039

Special shaped discs

Low quality discs

Z17058

Z17037

NOTICE

z Do not use special shaped, trans- parent/translucent, low quality or la- beled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc.

z This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to the player or changer.

Transparent/translucent discs

Labeled discs

283

07 12.25

Z17052

Z17053

Correct

Wrong

To clean a disc: Wipe it with a soft, lint− free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti−static device.

D Handle

the discs carefully, especially when you are them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side.

inserting

D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a chapter or track. (To see a pin hole, hold the disc up to the light.)

D Remove discs from the compact disc player when you are not playing them. Store them in their plastic cases away from moisture, heat, and direct sun- light.

284

MP3/WMA FILES D MP3 (MPEG Audio Layer 3) and WMA (Windows Media Audio) are audio com- pression standards.

D The MP3/WMA player can play MP3
and WMA files on CD−ROM, CD−R and CD−RW discs. The unit can play disc recordings com- patible with ISO 9660 level 1 and level 2 and with the Romeo and Joliet file system.

D When naming an MP3 or WMA file, add the appropriate file extension (.mp3
or .wma).

D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise and playback errors, use the appropri- ate file extensions.

D Multi−session compatible CDs can also

be played.

D MP3 files are compatible with the ID3
Tag Ver.1.0, Ver.1.1, Ver.2.2, and Ver.2.3 formats. The unit cannot display disc title, track title and artist name in other formats.

07 12.25

D WMA files can contain a WMA tag that is used in the same way as an ID3
tag. WMA tags carry information such as track title, artist name.

D The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. (The system can play MP3 files with sampling fre- quencies of 16, 22.05, and 24 kHz. However, the emphasis function is not available for files recorded at these fre- quencies.)

D The sound quality of MP3/WMA files generally improves with higher bit rates. In order to achieve a reasonable level of sound quality, discs recorded with a bit rate of at least 128 kbps are recommended. Playable bit rates MP3 files: MPEG1 LAYER3—64 to 320 kbps MPEG2 LSF LAYER3—64 to 160 kbps WMA files: Ver7, 8 CBR—48 to 192 kbps Ver9 CBR—48 to 320 kbps

D The MP3/WMA player does not play back MP3/WMA files from discs record- er using packet write data transfer (UDF re- corded using “pre−mastering” software rather than packet−write software.

format). Discs should be

D M3u playlists are not compatible with

the audio player.

D MP3i (MP3 interactive) and MP3PRO formats are not compatible with the au- dio player.

D The MP3 player

is compatible with

VBR (Variable Bit Rate).

D When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if fast−forward or reverse operations are used.

D It is not possible to check folders that

do not include MP3/WMA files.

D MP3/WMA files in folders up to 8 lev- els deep can be played. However, the start of playback may be delayed when using discs containing numerous levels of folders. For this reason, we recom- mend creating discs with no more than two levels of folders.

001.mp3
002.mp3

RS18193

Folder 1
003.mp3
Folder 2
004.mp3
005.mp3

Folder 3
006.mp3

MP3 player (rear seat entertainment sys- tem)

001.mp3
002.wma

RS18193

Folder 1
003.mp3
Folder 2
004.mp3
005.wma

Folder 3
006.mp3

MP3/WMA player (front audio system)

285

07 12.25

D The play order of

the compact disc with the structure shown on the left is as follows:

MP3 player (rear seat entertainment sys- tem)

001.mp3

002.mp3 . . .

006.mp3

MP3/WMA player (front audio system)

001.mp3

002.wma . . .

006.mp3

D MP3 player

(rear seat entertainment system)—It is possible to play up to 253 folders on one disc.

D MP3/WMA player

(front audio sys- tem)—It is possible to play up to 192
folders or 255 files on one disc.

D The order changes depending on the PC and MP3/WMA encoding software you use.

286

CD−R and CD−RW discs D CD−R/CD−RW discs that have not been to the “finalizing process” (a subject process that allows discs to be played on a conventional CD player) cannot be played.

D It may not be possible to play CD− R/CD−RW discs recorded on a music CD recorder or a personal computer because characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of the unit.

disc

of

D It may not be possible to play discs recorded on a personal computer de- pending on the application settings and the environment. Record with the cor- rect format. (For details, contact the appropriate application manufacturers of the applications.)

D CD−R/CD−RW discs may be damaged to sunlight, high by direct exposure temperatures or other storage condi- tions. The unit may be unable to play some damaged discs.

D Titles and other

information re- corded on CD−R/CD−RW disc may not be displayed by the MP3/WMA player (in the case of audio data [CD−DA]).

text

D The MP3/WMA player conforms to the track skip function of the CD−R/CD− RW disc.

D If you insert a CD−RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD−R disc.

D Read

the precautions accompanying

the CD−R/CD−RW discs before use.

D Recordings on CD−R/CD−RW cannot the DDCD (Double

be played using Density CD) system.

07 12.25

TERMS Packet write— This is a general term that describes the process of writing data on−demand to CD−R, etc., in the same way that data is written to floppy or hard discs. Bit rate— Bit rate refers to data volume per second, or bps units (bits per second). The higher the rate, the more information is available to reproduce the sound. The higher the rate, the better the sound. Multi−session— Multi−session is a recording method that allows additional data to be recorded later. When recording data on a CD−ROM, CD−R or CD−RW, etc., all data from be- ginning to end is treated as a single unit or session. Multi−session is a method of recording more than 2 sessions on one disc. CD−DA— CD−DA for Compact Disc Digital Audio. It refers to the uncom- pressed format of regular CDs.

is an abbreviation

functions. Although

ID3 Tag— This is a method of embedding track−re- lated information in an MP3 file. This em- bedded information can include the track title, the artist’s name, the album title, the music genre, the year of production, com- ments and other data. The contents can be freely edited using software with ID3
tag editing the tags are restricted to the number of characters, the information can be viewed when the track is played back. WMA Tag— WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track title, artist name. ISO 9660 format— This is the international standard for the formatting of CD−ROM folders and files. For the ISO 9660 format, there are two levels of regulations. Level 1: The file name is in 8.3 format (8 charac- ter file extension. File names must be composed of one−byte capital letters and numbers. The “_” symbol may also be included.)

file names, with a 3 character

Level 2: The file name can have up to 31 charac- ters (including the separation mark “.” and file extension). Each folder must contain fewer than 8 hierarchies. Extended formats Joliet: File names can include up to 64 charac- ters. Romeo: File names can include up to 128 charac- ters. m3u— Playlists created using “WINAMP” software have a playlist file extension (.m3u). MP3— MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organiza- tion). MP3 compresses audio data to about 1/10 the size of that on convention- al discs. WMA— WMA (Windows Media Audio) is an audio compression format developed by Micro- soft. It compresses files into a size small- er than that of MP3 files. The decoding formats for WMA files are Ver7, 8, and 9. 287

07 12.25

288

07 12.25

SECTION 1− 9

OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Controls Air flow selector settings Operating tips Instrument panel and rear vents Air conditioning filter

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

290
296
296
299
300

289

07 12.25

Controls (without “DUAL” button)

CY18026

290

1. Fan speed selector 2. “AUTO” button 3. Temperature selector 4. “A/C” button 5. Air flow selector 6. Air intake selector 7. “OFF” button

07 12.25

“AUTO” button For automatic operation of the air condi- tioning, push the “AUTO” button. An indi- cator light will illuminate to show that the automatic operation mode has been se- lected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on−off of the air conditioning according to the tem- perature. When you push the “AUTO” button with the air intake mode at FRESH, internal circulation may be applied for maximum cooling. You may use manual controls if you want to select your own settings. Fan speed selector Select the mode button you desire to ad- just the fan speed and push it. An indica- tor light will illuminate to show which fan speed mode is being selected. In automatic operation, you do not have to adjust the fan speed unless you desire another fan speed mode.

the the

the to decrease

temperature, push it, push

Temperature selector To increase “UP” side, “DOWN” side. “LO” appears when you adjust to maxi- mum cooling, and “HI” appears when you adjust to maximum warming. “OFF” button Push the “OFF” button to turn off the air conditioning system.

CY18014

illuminate

to select

the buttons

to show which air

Air flow selector Push one of the vents used for air flow. An indicator light will flow mode is being selected. In automatic operation, you do not have to select the air flow unless you desire another air flow mode. 1. Panel—Air

the panel vents and rear vents.

instrument

flows

from

2. Bi−level—Air flows from both the floor vents, the instrument panel vents and rear vents.

3. Floor—Air flows mainly from the floor

vents.

291

07 12.25

4. Floor/Windshield—Air

the

flows mainly from floor vents and windshield vents and fan speed may increase in order to clean up the front view. This button allows to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again.

the air

intake

5. Windshield—Air flows mainly from the windshield vents and fan speed may increase in order to clean up the front view. Pressing this button once again returns the air flow mode to the last one used. This button allows to select FRESH automatically. This is to clean up the front view more quickly. It is not possible to return to RECIR- CULATE in this mode.

the air

intake

For details about air flow selector settings, see “Air flow selector settings” described below.

292

If the ambient temperature is low when the engine switch is turned to the “ON” position, the air intake mode is always set to FRESH even though the previous mode was RECIRCULATE. “A/C” button To turn on the air conditioning, push the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, push the button again. If the “A/C” button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your ve- hicle to a Toyota dealer for service.

CY18004

Air intake selector Push the button to select the air source. An indicator light will illuminate to show which the air source is being selected. 1. Recirculate—Recirculates the air inside

the vehicle.

2. Fresh—Draws outside air into the sys-