2012 Nissan Quest Owners Manual

GUID-68DACA48-E6C6-4EF3-A41E-FC1D3111904C the “Bluetooth” settings, see For details of “Bluetooth® hands-free phone system (models with navigation system)” (P.4-112) or “Blue- tooth® streaming audio (models with navigation system)” (P.4-83).

Audio settings GUID-53F882F8-82F8-43EE-A19F-864C4A00E327
The display as illustrated will appear when pushing the SETTING button and selecting the “Audio” key.

Bass/Treble/Balance/Fade: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To adjust the speaker tone quality and sound balance, select the “Bass”, “Treble”, “Balance” or “Fade” key and adjust it with the multi- function controller. These items can also be adjusted by pushing and turning the AUDIO knob.

Speed Sensitive Vol.: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The audio system’s volume is increased with the vehicle speed. Select the “Speed Sensitive Vol.” and adjust the effect level with the multi-function controller. The Speed Sensitive Volume function is turned off when the level is set to “OFF”. Increasing the value will cause the volume to increase faster with vehicle speed.

DivX® Registration Code (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The registration code for a device that is used to download DivX® files will be displayed on the screen. If a disc is loaded or a USB memory is connected to the audio system, this function will not be activated.

Models with navigation system

SAA2485

Models without navigation system

SAA2740

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-15

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (196,1)

“Guidance Volume” and adjust it with the multi- function controller. You can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being announced.

Ringtone/Incoming Call/Outgoing Call: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
For the details of these items, see “Bluetooth® hands-free phone system (models with naviga- tion system)” (P.4-112).

Switch Beeps: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, you will hear a beep sound when you use a button.

Guidance Voice: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, you will hear voice guidance in the navigation operation or in other operations. NOTE:

When the voice guidance is being an- nounced during audio playback, turning the volume knob does not adjust the music level; it adjusts the guidance volume level. If voice guidance is not being heard, please check the Guidance Volume level.

JVH0176M

Switch Beeps settings (models without navigation system) GUID-AAE88586-15F6-4981-9A7B-7FF6D101C77A The “Switch Beeps” screen will appear when pushing the SETTING button, selecting the “Switch Beeps” key with the multi-function controller and pushing the ENTER button.

Switch Beeps: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, you will hear a beep sound when you use a button.

Example

SAA2554

Volume & Beeps settings (models with navigation system) GUID-FF8E399D-CE7B-4107-8D49-6253F81687DE The display as illustrated will appear when pushing the SETTING button, selecting the “Volume & Beeps” key.

Audio Volume: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To increase or decrease the audio volume, select the “Audio Volume” and adjust it with the multi-function controller. You can also adjust the audio volume by turning the VOLUME control knob.

Guidance Volume: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To adjust the guidance voice volume, select the

4-16 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

REAR DISPLAY settings (if so equipped) GUID-FB4482FC-D48E-48C7-BA91-1C8CCEB50D2C The “Rear Display” screen will appear when pushing the SETTING button, selecting the “Rear Display” key.

Rear Display (models with navigation sys- tem)/Rear Display Open (models without navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, the rear display opens. When the ignition switch is pushed to the “ACC” or “ON” position, the rear display is flipped down automatically. When the ignition switch is pushed to the “OFF” position, the rear display is closed automatically if ON is selected. The rear display can also be opened or closed using the remote controller. (See “NISSAN mobile entertainment system (MES)” (P.4-101).)

Black plate (197,1)

SAA2486

Display settings (models with navigation system) GUID-DED0FB77-D2FB-44D1-926E-A6B2E9D6B2AB The display as illustrated will appear when pushing the SETTING button and selecting the “Display” key.

Display Adjustment: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To adjust the display settings, select the “Dis- play Adjustment” key. The following settings are available. . Display To turn off the screen, push the ENTER button and turn the “Display” indicator off. The other method is to push and hold the “ OFF” button for more than 2 seconds.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-17

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Models with navigation system

SAA2917

Models without navigation system

SAA2079

the screen turns on for

When any mode button is pushed with the screen off, further operation. The screen will turn off automatically 5 seconds after the operation is finished. To turn on the screen, set this item to the ON position, or push and hold the “ OFF” button. . Brightness/Contrast/Background Color To adjust the brightness and contrast of the screen, select the “Brightness” or “Contrast” key. Then, you can adjust the brightness to and the contrast to using the multi-function controller. For information on the “Background Color” key, refer to the separate Navigation System Own- er’s Manual.

Color Theme: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Choose the theme color of the menu screen from “Black”, “Blue” or “Red”.

Black plate (198,1)

Brightness/Contrast/Background Color: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To adjust the brightness, contrast and back- ground color of the screen, select the appro- priate “Brightness”, “Contrast” or “Background Color” key and push the ENTER button. You can then adjust the brightness and contrast using the multi-function controller. Switch the background color to the daytime mode or the nighttime mode by pushing the ENTER button.

SAA2115

Display settings (models without navi- gation system) GUID-F0C405AE-BCB7-4276-88F5-85173E8D555C The “Display” screen will appear when pushing the SETTING button on the control panel.

Display: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To turn off the screen, push the ENTER button and turn the “ON” indicator off. When any mode button is pushed with the screen off, further operation. The screen will turn off automatically 5 seconds after the operation is finished. To turn on the screen, set this item to the “ON” position or push the “

the screen turns on for

OFF” button.

4-18 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (199,1)

GUID-C72587AB-096C-45D1-88C8-E7D0332A4B34

Comfort settings Models with navigation system The display as illustrated will appear when pushing the SETTING button, selecting the “Others” key and then selecting the “Comfort” key. This key does not appear on the display until the ignition switch is pushed to the ON position. Models without navigation system The display as illustrated will appear when pushing the SETTING button and selecting the “Comfort” key. This key does not appear on the display until the ignition switch is pushed to the ON position.

Auto Interior Illumination: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, the interior lights will illuminate if any door is unlocked.

Light Sensitivity: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Adjust the sensitivity of the automatic headlights higher (right) or lower (left).

Light Off Delay: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Choose the duration of the automatic headlight off timer from 0, 30, 45, 60, 90, 120, 150 and 180 second periods.

Speed Sensing Wiper Interval: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, the wiper interval is adjusted automatically according to the vehicle speed.

JVH0157M

SAA2488

Others settings (models with navigation system) GUID-5D053739-4550-4C85-9AF7-7E809E143435
The Others settings display will appear when pushing the SETTING button and selecting the “Others” key. The following items are available: . Comfort . Clock Language & Units . Voice Recognition . Camera

Image Viewer

Models with navigation system

Models without navigation system

JVH0182M

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-19

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (200,1)

GUID-BFC31A8A-F213-4E83-BCA8-3CEC943F2C79

Clock settings Models with navigation system: The display as illustrated will appear when pushing the SETTING button and selecting the “Others” key, and then selecting the “Clock” key. Models without navigation system: The display as illustrated will appear when pushing the SETTING button and selecting the “Clock” key. The clock settings display cannot be operated while driving. Stop the vehicle in a safe place and apply the parking brake before setting the clock.

On-screen Clock: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, a clock is always displayed in the upper right corner of the screen. indicate the time almost exactly This clock will because it is always adjusted by the GPS system (models with navigation system).

Clock Format (24h): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, the 24-hour clock is displayed. When this item is not turned on, the 12-hour clock is displayed.

Offset (hour)/(min) (models with naviga- tion system)/Clock Adjust (models without navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Adjust the time by increasing or decreasing per

Slide Driver Seat Back on Exit (if so equipped): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, the driver’s seat moves backward for easy exit the ignition switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and pushing the ignition switch to the ACC position, the driver’s seat moves to the previous position.

if

is unlocked first after

Selective Door Unlock: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, only the driver’s door the door unlock operation. When the door handle request switch on the driver’s or front passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the door unlock operation is per- formed again within 60 seconds. When this item is turned off, all the doors will be unlocked after the door unlock operation is performed once.

Intelligent Key Lock/Unlock: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned on, door lock/unlock function by pushing the door handle request switch will be activated.

Return All Settings to Default: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Select this item and then select “YES” to return all settings to the default.

Models with navigation system

SAA2487

Models without navigation system

SAA3675

4-20 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

hour or per minute.

Daylight Saving Time: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Turn this item to ON for daylight saving time application.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407

Time Zone: Choose the time zone from the following Models with navigation system . Pacific . Mountain . Central . Eastern . Atlantic . Newfoundland . Hawaii . Alaska Models without navigation system . Eniwetok, Kwajalein . Midway Island, Samoa . Hawaii . Alaska . Pacific

Models with navigation system

SAA2490

Black plate (201,1)

GUID-BCFE3358-E33E-4D91-B48E-D6294EA4F597

Language & Units settings Models with navigation system The Language & Units settings display will appear when pushing the SETTING button, selecting the “Others” key, and then selecting the “Language & Units” key. Models without navigation system The display illustrated will appear when pushing the SETTING button and selecting the “Lan- guage & Units” key.

Select Language: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Select the “Select Language” key. Choose “English”, “Franc¸ ais” or “Espan˜ ol” for your favorite display appearance. If you select the French language will be displayed, so please use the French Owner’s Manual. To obtain a French Owner’s Manual, see “Owner’s manual/service manual order information” (P.9-28).

the “Franc¸ ais” key,

Select Units: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Select the “Select Units” key. Choose “US” (Mile, 8F, MPG) or “Metric” (km, 8C, L/100 km) for your favorite display appearance.

Models without navigation system

SAA1092

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-21

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (202,1)

vehicle in a safe location and apply the parking brake.

Voice Recognition settings (models with navigation system) GUID-D612C1DB-E4E2-4A94-9CAE-92F3B26FA167
the “Voice Recognition” For details about settings, see “NISSAN voice recognition system (models with navigation system)” (P.4-136).

CAMERA settings (if so equipped) GUID-589CA7A2-F185-444B-9C76-0D30FCECFBFC The “CAMERA” screen will appear when select- ing the “Camera” key. For operation, see “Rearview monitor” (P.4-24).

the camera system

the details about

SAA2491

Image Viewer (models with navigation system) GUID-1AA66F1E-12F5-4858-8ECA-BF334BD19D70
The image files in the USB memory will be displayed. To display the Image Viewer, push the SETTING button, select the “Other” key and then select the “Image Viewer” key. The image of the selected file is displayed on the right side of the screen. When a number of folders are included in the USB memory, select a folder from the list to display the file list. Images will not be shown on the display while the vehicle is in any drive position to reduce driver distraction. To view images, stop the

4-22 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (203,1)

— Maximum Size: 2-MB — Colors: 32768 (15-bit) — Maximum File Name lengths: 253-Bytes — Maximum Folders: 500
— Maximum Images per Folder: 1024
If an electronic device (such as a digital camera) is directly connected to the vehicle using a USB cable, no image will be displayed on the screen. If the file name is too long, some file names may not be entirely displayed.

. When the total number of characters in the file name exceeds 100 or if 1 file name in a directory exceeds 100 characters, all files will show a shortened 8-character version. The image will still be displayed when selected.

(Previous)

Select the “ file.

” key to display the previous

Setting the Image Viewer: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The Image Viewer setting display will appear when selecting the “Settings” key on the full screen display. The following settings are available for the full screen display. . Slideshow Speed

Select the “Slideshow Speed” key. From the following display, select the changing time from 5, 10, 30, 60 seconds or “No Auto Change”.

. Slideshow Order

Select the “Slideshow Order” key. From the following display, select “Random” or “Order List”. For “Order List”, the image order is the order of the files as stored on the USB memory.

Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. Only files that meet the following conditions

will be displayed. — Image type: JPEG — File Extensions: *.jpg, *jpeg — Maximum Resolution: 2048 6 1536

pixels

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-23

[ Edit: 2011/ 10/ 27 Model: E52-D ]

SAA2492

Full Screen Display: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The full screen display will appear when select- ing the “Full Screen Display” key. To operate the Image Viewer or to change the settings, select the desired key using the multi- function controller.

” key to start playing the

(Start) Select the “ slideshow.

(Stop)

Select the “ (Next) Select the “

” key to stop the slideshow.

” key to display the next file.

REARVIEW MONITOR (if so equipped)

GUID-F0606F86-5EEC-4AE2-8DC9-7A3D16A225CE When the selector lever is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle. The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper and may not detect objects close to the bumper or on the ground.

WARNING

The rearview monitor is a conveni- ence but it is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed. Always look out the win- dows and check mirrors to be sure that is safe to move before operating the vehicle. Always oper- ate the vehicle slowly.

it

. Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used. Objects in the RearView Monitor will appear visually opposite than when viewed in the rear view and outside mirrors.

. Make sure that

the lift gate is

securely closed when backing up.

. Underneath the bumper and the corner areas of the bumper cannot be viewed on the RearView Monitor because of its monitoring range limitation.

. Do not put anything on the rear view camera. The rear view camera is installed above the license plate.

. When washing the vehicle with high-pressure water, be sure not to spray it around the camera. Other- wise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.

. Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock.

CAUTION

Do not scratch the camera lens when cleaning dirt or snow from the lens.

4-24 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (204,1)

SAA1896

HOW TO READ THE DISPLAYED LINES GUID-5B92472D-5CFA-4B1F-AD61-E8D78F33D1EA Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line *A are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body. . Red line *1 : approx. 1.5 ft (0.5 m) . Yellow line *2 : approx. 3 ft (1 m) . Green line *3 : approx. 7 ft (2 m) . Green line *4 : approx. 10 ft (3 m) Vehicle width guide lines *5 : Indicate the vehicle width when backing up.

Black plate (205,1)

Predicted course lines *6
(if so equipped): Indicate the predicted course when backing up. The predicted course lines will be displayed on the monitor when the selector lever is in the R (Reverse) position and the steering wheel is turned. The predicted course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the neutral position. HOW TO PARK WITH PREDICTED COURSE LINES (if so equipped)

GUID-A11644FC-AE35-466F-963F-0AD03B978A20

WARNING

. Always turn and check that it is safe to do so before backing up. Always back up slowly.

. Use the displayed lines as a refer- ence. The lines are highly affected by the number of occupants, fuel level, vehicle position, road condi- tion and road grade.

If the tires are replaced with differ- ent sized tires, the predicted course line may be displayed incorrectly.

. On a snow-covered or slippery road, there may be a difference between the predicted course line and the

actual course line.

The displayed lines will appear slightly off to the right because the rear view camera is not installed in the rear center of the vehicle.

The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects.

. When backing-up the vehicle up a hill objects viewed in the monitor are further than they appear. When backing-up the vehicle down a hill, objects viewed in the monitor are closer than they appear. Use the inside mirror or glance over your shoulder to properly judge dis- tances to other objects.

1. Visually check that the parking space is safe

before parking your vehicle.

SAA1897

The vehicle width and predicted course lines are wider than the actual width and course.

2. The rear view of the vehicle is displayed on the screen *A when the selector lever is moved to the R (Reverse) position.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-25

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (206,1)

5. When the vehicle is parked in the space completely, move the selector lever to the P (Park) position and apply the parking brake. DIFFERENCE BETWEEN PREDICTED AND ACTUAL DISTANCES GUID-BF4CBB31-807A-4A41-9906-5B67A45C6D61
The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and dis- played objects.

SAA1898

3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines *B enter the parking space *C .

4. Maneuver the steering wheel to make the vehicle width guide lines *D parallel to the parking space *C while referring to the predicted course lines.

4-26 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

SAA2019

Backing up on a steep uphill GUID-07BEF518-919E-4856-AACC-C320D74CB77C When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the place *A , but the actual 3 ft (1 m) distance on the hill is the place *B . Note that any object on

Black plate (207,1)

is viewed in the monitor further than it

the hill appears.

is viewed in the monitor closer than it

the hill appears.

SAA2020

Backing up on a steep downhill GUID-6FE29F8A-E556-4CE1-8AB7-218619AD2F2B When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance. For example, the display shows 3 ft (1 m) to the place *A , but the actual 3 ft (1 m) distance on the hill is the place *B . Note that any object on

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-27

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (208,1)

course.

SAA2021

SAA2022

GUID-048AD395-96D9-4337-9BEC-6DFD1A548AA9

Backing up near a projecting object The predicted course lines *A (if so equipped) do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual backing up course.

is shown further

Backing up behind a projecting object The position *C GUID-5B481DE7-D01B-466B-A493-96075145585C than the position *B the position *C is actually at the same distance as the position *A . The vehicle may hit the object when backing up to the position *A if the object projects over the actual backing up

in the display. However,

4-28 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (209,1)

PREDICTIVE COURSE LINE SETTINGS (if so equipped) GUID-D361DBBB-D939-418F-B6CF-5EC912585221
To turn ON or OFF the predictive course line display, push the SETTING button, select the “Camera” key and push the ENTER button. Predictive Course Lines: the predicted When this item is turned on, course lines will be displayed on the monitor when the selector lever is in the R (Reverse) position. HOW TO ADJUST THE SCREEN GUID-E88B82B8-BA68-4175-B0F4-4EBBB81584CF . Models with Center Multi-function Control

Panel To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the RearView Monitor, push the SETTING but- ton with the RearView Monitor on, select the item key and adjust the level using the multi- function controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the RearView Monitor while the vehicle is moving. Make sure the parking brake is firmly applied and the engine is not running. The display of the predicted course lines can be set to ON or OFF. For details, see “CAMERA settings” (P.4-22).

. Models without Center Multi-function Con-

trol Panel To set up the RearView Monitor to your preferred settings, push the SETTING but- ton while the RearView Monitor screen is displayed. Each time the SETTING button is pushed, the next setting item is selected. Turn the TUNE·SCROLL control knob to adjust each item. Available setting items: — Brightness — Contrast The setting items will disappear and the display will return to the original screen if SETTING button is pushed when the last setting item is selected or if the screen is left without operation for some time. For details, see “FM-AM-SAT radio with Compact Disc (CD) player (Type A)” (P.4-64).

OPERATING TIPS GUID-50B88478-733C-4EEC-A858-A9A917C9D9F2
. When the selector lever is shifted to the R (Reverse) position, the monitor screen auto- matically changes to the RearView Monitor mode. However, the radio can be heard. It may take some time until the RearView Monitor or the normal screen is displayed after the selector lever has been shifted to R from another position or to another position from R. Objects may be distorted momenta-

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-29

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Models with navigation system

SAA2404

Models without navigation system

SAA2606

Black plate (210,1)

VENTILATORS

GUID-ADBCDC3B-14A7-4BB0-AB93-C7F6F05F9243

SAA3511

Center

CENTER VENTILATORS GUID-DE68D695-F57B-4B4B-B293-5172E4A17860
Adjust the air flow direction of the ventilators by moving the center knob (up/down, left/right) until the desired position is achieved.

rily until displayed completely.

the RearView Monitor screen is

. When the temperature is extremely high or the screen may not clearly display

low, objects. This is not a malfunction.

. When strong light directly enters the cam- era, objects may not be displayed clearly. This is not a malfunction.

. Do not use wax on the camera window. Wipe off any wax with a clean cloth dampened with mild detergent diluted with water.

. Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction. The screen may flicker under fluorescent light. This is not a malfunction. The colors of objects on the RearView Monitor may differ somewhat from those of the actual object.

. Objects on the monitor may not be clear in a dark place or at night. This is not a malfunction. If dirt, rain or snow attaches to the camera, the RearView Monitor may not clearly dis- play objects. Clean the camera.

. Do not use alcohol, benzine or thinner to clean the camera. This will cause discolora- tion. To clean the camera, wipe with a cloth dampened with diluted mild cleaning agent and then wipe with a dry cloth.

. Do not damage the camera as the monitor

screen may be adversely affected.

4-30 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (211,1)

HEATER AND AIR CONDITIONER

GUID-80BBDF64-A7D7-4098-B53C-6003FA8720E9

WARNING

The heater and air conditioner oper- ate only when the engine is running. . Never leave children or adults who would normally require the support of others alone in the vehicle. Pets should not be left alone either. They c o u l d u n k n o w i n g l y a c t i v a t e switches or controls and inadver- tently become involved in a serious accident and injure themselves. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.

. Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.

. Do not adjust the heating and air conditioning controls while driving so that full attention may be given to vehicle operation.

The heater and air conditioner operate when the engine is running. The air blower will operate

SAA3676

SAA3055

Side SIDE VENTILATORS GUID-F08870EF-0946-4EEE-A94E-D1F2E688A0CC Open/close the ventilators by moving the control dial *1

to either direction.

This symbol indicates that the ventilators are closed. Moving the side control to this direction will close the ventilators. This symbol indicates that the ventilators are open. Moving the side control to this direction will open the ventilators.

Adjust the air flow direction of the ventilators by moving the center knob *2
(up/down, left/right) until the desired position is achieved.

Rear REAR VENTILATORS GUID-DAFEFF24-3A4B-4F4E-A7FD-EE54F99AA552
If the center knob is moved fully to the left or right, the ventilators will be closed. Adjust the air flow direction of the ventilators by moving the center knob (up/down, left/right) until the desired position is achieved.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-31

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (212,1)

OPERATING TIPS (for automatic air conditioner) GUID-AE24D3AF-44E9-4C60-BD45-827C7F5E7293
temperature and When the engine coolant outside air temperature are low, the air flow from the foot outlets may not operate. However, this is not a malfunction. After the coolant temperature warms up, the air flow from the foot outlets will operate normally. The sensors *A located on the instrument panel help maintain a constant temperature. Do not put anything on or around the sensors.

and *B

SAA3594

SAA3514

even if the engine is turned off and the ignition switch is in the “ON” position.

4-32 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (213,1)

10. 11.

“A/C” air conditioner ON/OFF button “REAR” control button

SAA3596

“Rear window and outside mirror defroster switch” (P.2-32).) “ ” and “ buttons “ON·OFF” button for air conditioning system “MODE” air flow control button

” fan speed control

7.

8. 9.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-33

[ Edit: 2011/ 10/ 27 Model: E52-D ]

GUID-CD7203EA-9307-4995-82E3-BD3B0296D19F

MANUAL AIR CONDITIONER 1. 2. 3. 4. 5. 6.

Temperature control buttons “ “ “ Display “

” air recirculation button ” outside air circulation button FRONT” front defroster button

REAR” rear window defroster button (See

Black plate (214,1)

Ventilation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode directs outside air to the side and center ventilators. 1. Push the outside air circulation “

” button to switch to the outside air circulation mode. (The indicator light turns on.)

2. Push the air flow control button to change to

the

mode.

3. Push the fan speed control

buttons to

set the desired position.

Bi-level heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode directs cool air from the side and center vents and warm air from the foot outlets. When the temperature is set to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature. 1. Push the outside air circulation “

” button to switch to the outside air circulation mode. (The indicator light turns on.)

2. Push the air flow control button to change to

the

mode.

3. Push the fan speed control buttons to set

the desired fan speed.

4. Push the temperature control buttons to set

the desired temperature.

light on the air

recirculate interior air inside the vehicle. The indicator ” button will illuminate. The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode.

recirculation “

Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the outside air circulation “ ” button to draw outside air into the passenger compart- ment. The indicator light on the outside air circulation “

” button will turn on.

Heater operation

GUID-30BF5593-2EBA-4BDC-997C-19DD23B575D5

Heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode is used to direct heated air to the foot outlets. 1. Push the outside air circulation “

” button to switch to the outside air circulation mode. (The indicator light turns on.)

2. Push the air flow control button to change to

the

mode.

3. Push the fan speed control buttons to set

the desired fan speed.

4. Push the temperature control buttons to set the desired temperature between the middle and the hot position.

Controls GUID-A04F8617-DF9F-4F48-BC23-EDEDEDFFC3B1
To turn off the heater and air conditioner, push the “ON·OFF” button.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
” to

Fan speed control: Push the fan speed control button “ increase the fan speed. Push the fan speed control button “ decrease the fan speed.

” to

A/C (Air Conditioner) operation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates.

Air flow control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the “MODE” button to change the air flow mode.

: Air flows from the center and side ventila-

tors.

: Air flows from the center and side ventila-

tors, and foot outlets.

: Air flows mainly from the foot outlets.

Air flows from the defroster and foot outlets.

Temperature control: Push the temperature control buttons (“ and “ ”) to set the desired temperature.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
”

Air recirculation: Push the air

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
recirculation “ ” button to

4-34 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (215,1)

Heating and defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode heats the interior and defogs the windows. 1. Push the air flow control button to change to

2. Push the air flow control button to change to

3. Push the fan speed control buttons to the

the

mode.

desired fan speed.

3. Push the fan speed control buttons to set

4. Push the A/C button on. (The A/C indicator

the desired fan speed.

light will illuminate.)

4. Push the A/C button on. (The A/C indicator

buttons to

light will illuminate.)

the

mode.

2. Push the fan speed control set the desired fan speed.

3. Push the temperature control buttons to set

the desired temperature.

mode is selected,

When the the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pressed.

Air conditioner operation GUID-803CA434-5D0E-4D2D-BEE1-1F3BD1B898F7
The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication.

Cooling: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode is used to cool and dehumidify the air. ” button 1. Push the outside air circulation “ to switch to the outside air circulation mode. (The indicator light turns on.)

5. Push the temperature control buttons to set the desired temperature between the middle and the cool position. For quick cooling when the outside tem- perature is high, push the air recirculation button to switch to the air recirculation mode. (The indicator light turns on.) Be sure to turn off the air recirculation mode for normal cooling.

. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Dehumidified heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode is used to heat and dehumidify the air. 1. Push the outside air circulation “

” button to switch to the outside air circulation mode. (The indicator light turns on.)

2. Push the air flow control button to change to

the

position.

5. Push the temperature control buttons to set the desired temperature between the middle and the hot position.

Dehumidified or defrosting/defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode is used to defog the windows and dehumidify the air. 1. Push the front defroster button

on. (The

indicator light turns on.)

2. Push the fan speed control buttons to set

the desired fan speed.

3. Push the temperature control buttons to set

the desired temperature.

mode is selected,

When the the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pushed. To remove frost from the outside surface of the windshield quickly, set the temperature to the maximum hot position and the fan speed to maximum position.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-35

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (216,1)

. Air does not blow out from the vents on the ceiling when the system is used for heating.

Turning the system off: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To turn off the rear air conditioner, push the “ON·OFF” button when “REAR” is on the display.

Rear air conditioning system

GUID-3B39B36B-520E-49C6-9C2A-A84AF85A5776

flow mode.

Operating from front control buttons: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To control the rear air conditioning system independently with the front air conditioner control panel, push the “REAR” button. When the rear air conditioning system control is on, the indicator light on the “REAR” button will illuminate and “REAR” will appear on the display. In this state, the rear air conditioning system can be adjusted with the front air conditioner control panel. However, if no operation is conducted for approximately 10 seconds after the “REAR” button is pushed, the front air conditioner control panel will automatically switch to the front air conditioning mode. To cancel the rear air conditioning mode and switch back to the front air conditioning mode, push “REAR” button one more time.

Temperature control Push the temperature control buttons (“ the desired temperature.

” and “

to set

”)

. Fan speed control

Push the fan speed control “ button or “ fan speed.

” ” button to control the

. Air flow control

Push the “MODE” button to change the air

The air outlet is fixed at foot level. The air outlet is fixed at both the head and foot level. The air outlet is fixed at the head level.

NOTE:

Pushing the “A/C” button when the rear air conditioning system is turned on and “REAR” does not appear on the display will turn off the rear air conditioning system (except when the air flow is set to the . Rear Heating (A/C off) 1. Push the “REAR” button to display “REAR” on the front display when the rear air conditioning system is on. 2. Switch the air flow mode to

by pressing

position).

3.

the “MODE” button. If the A/C indicator light illuminates, push the “A/C” button. (The A/C indicator light will turn off.)

”)

to set

” and “

4. Push the temperature control buttons (“ the desired temperature between the middle and the hot position. To dehumidify the air, push the “A/C” button before turning on the heater.

4-36 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (217,1)

front display). “OFF” button: Turns off the rear air conditioning system. “ fan speed “MODE” button: Changes the rear air flow “TEMP” buttons: Adjust the rear temperature

” Fan speed control buttons: Adjust rear

SAA3674

1. 2. 3. 4. 5.

” Fan speed control buttons

“OFF” button “ Display “MODE” button “TEMP” buttons

Rear control buttons: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The rear seat passengers can adjust the rear air conditioning system using the control switches located on the ceiling above the rear seats. The rear control buttons do not function when “REAR” is shown on the front display. To activate the rear control buttons, push the “REAR” button on the front air conditioner control panel and cancel the rear air conditioner control mode (“REAR” will disappear from the

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-37

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (218,1)

8. 9. 10. 11. 12. 13. 14.

“MODE” manual air flow control button “ON·OFF” button for air conditioning system “AUTO” button “ “A/C” air conditioner ON/OFF button “REAR” control button “DUAL” zone control ON/OFF button

” fan speed control buttons

SAA3595

4. 5. 6.

7.

FRONT” front defroster button

“ Display REAR” rear window defroster button (See “ “Rear window and outside mirror defroster switch” (P.2-32).) Temperature control buttons (passenger side)

GUID-26808BE2-2D7D-4D4F-81C9-3D2D1185C3FD

AUTOMATIC AIR CONDITIONER 1. 2. 3.

Temperature control buttons (driver side) ” air recirculation button “ AUTO” auto-recirculation button (models “ ” with Advanced Climate Control System)/“ Outside air circulation button (models without Advanced Climate Control System)

4-38 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (219,1)

Automatic operation (AUTO) GUID-D3349AE0-1D21-4681-9BC9-F5E415C17B3A The AUTO mode may be used year-round as the system automatically controls constant tempera- ture, air flow distribution and fan speed after the desired temperature is set manually. To turn the heater and air conditioner on or off, push the “ON·OFF” button.

Cooling and dehumidified heating: 1. Push the “AUTO” button.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407

2.

(The AUTO indicator light will illuminate.) If the A/C indicator light does not illuminate, push the “A/C” button. (The A/C indicator light will illuminate.)

3. Push the temperature control buttons ”) (driver’s side) to set the

(“ desired temperature. . The temperature can be set within the

” and “

range of 60 to 908F (18 to 328C).

. When “DUAL” does not appear on the

display:

— Pushing the “AUTO” button changes both the driver’s and front passenger’s side temperature.

— Pushing the “DUAL” button allows the user to independently change the front passenger’s side temperature with the passenger side temperature control but-

4. Models with Advanced Climate Control

” and “

”). (“DUAL” will

tons (“ appear on the display.) the separate temperature To cancel setting, push the “DUAL” button (“DUAL” will disappear from the display) and the driver’s side temperature setting will be applied to both the driver’s and front passenger’s sides.

System (ACCS): . Push the “

AUTO” auto-recirculation

button. The indicator light on the “ AUTO” auto-recirculation button will illu- minate. In this mode, the sensor detects odors and gas to automatically switch between the air recirculation mode and the outside air circulation mode. (See “Advanced climate control system” (P.4- 42) for details.)

Models without Advanced Climate Control System (ACCS): ” . Push and hold the air recirculation “ button or outside air circulation “ ” button (the one with the indicator light on) for more than 2 seconds to set the automatic control between the air recir- culation and outside air circulation modes. (The “ ” indicator lights will blink twice.)

” and “

flow control

The following conditions need to be met for the automatic air intake control mode to function properly.

The air in the front defroster mode (the indicator light on the front defroster “ FRONT” button is turned off). The outside temperature is approximately 328F (08C) or above.

is not

A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a mal- function.

Heating (A/C off): 1. Push the “AUTO” button.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407

2.

(The AUTO indicator light will illuminate.) If the A/C indicator light illuminates, push the “A/C” button. (The A/C indicator light will turn off.)

” and “

3. Push the temperature control buttons ”) (driver’s side) to set the

(“ desired temperature. When the DUAL mode is turned off (“DUAL” does not appear on the display): . Pushing the “AUTO” button changes both the driver’s and front passenger’s side temperature.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-39

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (220,1)

their maximum position.

. After the windshield is cleared, push the “AUTO” button to set to the automatic mode.

. When the front defroster “

FRONT” button is pushed, the air conditioner will automatically turn on sensing the outside air temperature to defog the windshield. Do not select the air recirculation mode for the best defogging performance.

NOTE:

Do not set the temperature too low when the front defroster mode is on (the indi- cator on the front defroster “ FRONT” button is illuminated). Doing so may fog up the windshield. Manual operation GUID-5BB422CA-6F6D-4204-8723-4A4B9231097D The manual mode can be used to control the heater and air conditioner to your desired settings.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
” to

Fan speed control: Push the fan speed control button “ increase the fan speed. Push the fan speed control button “ decrease the fan speed. Push the “AUTO” button to change the fan speed to the automatic mode.

” to

” or “

. Pushing the “DUAL” button allows the user to independently change the front passenger’s side temperature with the passenger side temperature control but- tons (“ (“DUAL” will appear on the display.) To cancel the separate temperature setting, push the “DUAL” button (“DUAL” will disappear from the display) and the driver’s side temperature setting will be applied to both the driver’s and front passenger’s sides.

”).

4. Models with Advanced Climate Control

System (ACCS): . Push the “

AUTO” auto-recirculation

button. The indicator light on the “ AUTO” auto-recirculation button will illu- minate. In this mode, the sensor detects odors and gas to automatically switch between the air recirculation mode and the outside air circulation mode. (See “Advanced climate control system” (P.4- 42) for details.)

Models without Advanced Climate Control System (ACCS): ” . Push and hold the air recirculation “ button or outside air circulation “ ” button (the one with the indicator light on) for more than 2 seconds to set the automatic control between the air recir-

culation and outside air circulation modes. (The “ ” indicator light will blink twice.)

” or “

flow control

The following conditions need to be met for the automatic air intake control mode to function properly.

The air in the front defroster mode (the indicator light on the front defroster “ FRONT” button is turned off). The outside temperature is approximately 328F (08C) or above.

is not

NOTE: . Do not set the temperature lower than the outside air temperature. Doing so may prevent the temperature from being controlled properly. To dehumidify the air, push the “A/C” button before turning on the heater.

Dehumidified defrosting/defogging: 1. Push the front defroster “

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
FRONT”

button. (The indicator light will illuminate.)

”)

” and “

2. Push the temperature control buttons the desired

(“ temperature. . To remove frost from the outside surface of the windshield quickly, set the tem- perature control and fan speed control to

to set

4-40 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (221,1)

flow control

The following conditions need to be met for the automatic air intake control mode to function properly.

The air in the front defroster mode (the indicator light on the front defroster “ FRONT” button is turned off). The outside temperature is approximately 08C (328F) or above.

is not

Air flow control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the “MODE” button to change the air flow mode.

compartment. The indicator light on the air recirculation “

” button will turn off.

. Models without Advanced Climate Control

Air flows from the center and side ventila- tors. Air flows from the center and side ventila- tors, and foot outlets. Air flows mainly from the foot outlets. Air flows from the defroster and foot outlets.

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
”

Temperature control: Push the temperature control buttons (“ and “ ”) to set the desired temperature. The temperature can be set within the range of 60 to 908F (18 to 328C).

Air recirculation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
recirculation “ ” button to Push the air recirculate interior air inside the vehicle. The indicator ” button will illuminate. The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode.

light on the air

recirculation “

Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. Models with Advanced Climate Control

System (ACCS): Push the air recirculation “ to draw outside air

” button twice into the passenger

System (ACCS): Push the outside air circulation “ to draw outside air compartment. The indicator outside air circulation “ on.

” button into the passenger light on the ” button will turn

Automatic air intake control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. Models with Advanced Climate Control

System (ACCS): Push the “ AUTO” auto-recirculation” button to switch to the automatic air intake control mode. The indicator light on the “ AUTO” auto-recirculation button will illuminate. In this mode, the sensor detects odors and gas to automatically switch between the air recirculation mode and the outside air circulation mode. (See for de- tails.)

. Models without Advanced Climate Control

System (ACCS): To switch to the automatic control mode, push the intake air control button for about 2
seconds. The indicator lights (both air recirculation “ ” and outside air circula- tion “ ” buttons) will flash twice, and then the intake air will be controlled automatically.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-41

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (222,1)

AUTO” auto-recirculation button AUTO” illuminate) under

when the “ is pushed (the indicator light on the “ auto-recirculation button will the following conditions.

The air in the front defroster mode (the indicator light on the front defroster“ FRONT” button is turned off). The outside temperature is about 328F (08C) or above.

flow control

is not

When the automatic air intake control is ON, for the first 5 minutes, the recirculation mode is selected to prevent dust, dirt and pollen from entering the vehicle and cleans the air inside of the vehicle with positive and negative ions that are emitted from the ventilator. After 5 minutes, the sensor detects exhaust gas and automatically alternates between the recir- culation mode and outside air circulation mode.

Turning the system off Push the “ON·OFF” button.

GUID-1F831DE2-BC89-4519-B4E7-64BBDAC08A9C

is turned on,

interior trim. When the air conditioner the system generates Plasmacluster® ions automa- tically. “The high-density Plasmacluster® ions gener- ated in the air conditioner’s air stream not only suppress airborne bacteria and reduce the adherence of odors to the interior trim, but also have a proven skin moisture preserving effect.” The amount of Plasmacluster® ions increases according to the amount of air flow. When the air flow is high, “ is displayed on the the screen and when the air ” *B . indication in the screen changes to “ Plasmacluster® and Plasmacluster® ions are registered trademark of Sharp corporation.

flow is low,

” *A

Automatic air intake control with exhaust gas/outside odor detection sensor: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This vehicle is equipped with an exhaust gas detection sensor. When the automatic air intake control is activated, the sensor detects industry odors such as pulp or chemicals, and exhaust gas such as gasoline or diesel. When such ” *C will odors or gas are detected, “ appear on the display and the system auto- matically changes from the outside air circulation mode to the recirculation mode. The automatic air intake control can be activated

SAA3670

Advanced climate control system (if so equipped) GUID-992F4241-5305-4CFF-A305-49BC8CE2F232
The advanced climate control system keeps the air inside of the vehicle clean, using the ion control and the automatic air intake control with exhaust gas detecting sensor. Push the “ AUTO” auto-recirculation button (the indicator light on the “ AUTO” auto- recirculation button will illuminate) to activate the ion control and the automatic air intake control.

Ion control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This unit generates highly concentrated Plas- macluster® ions into the air blown from the ventilators and reduces odor absorbed into the

4-42 Monitor, heater, air conditioner, audio, phone and voice recognition systems

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Rear air conditioning system GUID-0E269FED-FC5A-402C-8C58-2E4BA5F45029
To control the rear air conditioning system independently with the front air conditioner control panel, push the “REAR” button. When the rear air conditioning system control is on, the light on the “REAR” button will indicator illuminate and “ ” will appear on the display. In this state, the rear air conditioning system can be adjusted with the front air conditioner control panel. However, if no operation is conducted for approximately 10 seconds after the “REAR” button is pushed, the front air conditioner control panel will automatically switch to the front air conditioning mode. To cancel the rear air conditioning mode and switch back to the front air conditioning mode, push “REAR” button one more time.

Automatic operation: 1. Push the “REAR” button to display “

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
” on the front display when the rear air condition- ing system is on.

Manual operation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To operate the rear air conditioning system using the front air conditioner control panel, push light on the “REAR” button (the indicator “REAR” button will ” will appear on the display).

Temperature control Push the temperature control buttons (“ ”) (driver’s side) to set the desired temperature. . Fan speed control

illuminate and “

” and “

Push the fan speed control “ button or “ control the fan speed.

” ” button to manually

. Air flow control

Push the “MODE” button to change the air flow mode.

The air outlet is fixed at foot level. The air outlet is fixed at both the head and foot level. The air outlet is fixed at the head level.

2. Push the “AUTO” button. indicator light will illuminate.)

(The AUTO

NOTE:

3. Push the temperature control buttons ”) (driver’s side) to set the

” and “

(“ desired temperature.

Pushing the “A/C” button when the rear air conditioning system is turned on and “ ” does not appear on the display will turn off the rear air conditioning system (except when the air flow is set to the position).

Black plate (223,1)

Rear Heating (A/C off): 1. Push the “REAR” button to display “

GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
” on the front display when the rear air condition- ing system is on.

2. Switch the air flow mode to

by pressing

the “MODE” button.

(The AUTO

3. Push the “AUTO” button. indicator light will illuminate.) If the A/C indicator light illuminates, push the “A/C” button. (The A/C indicator light will turn off.)

4.

5. Push the temperature control buttons ”) (driver’s side) to set the

” and “

(“ desired temperature.

. Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled prop- erly. To dehumidify the air, push the “A/C” button before turning on the heater.

. Air does not blow out from the vents on the ceiling when the system is used for heating.

Turning the system off: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To turn off the rear air conditioner, push the “ON·OFF” button when “ ” is on the display.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-43

[ Edit: 2011/ 10/ 27 Model: E52-D ]

Black plate (224,1)

SERVICING AIR CONDITIONER

GUID-49EFA09B-8B66-4996-B958-EB215077419B

WARNING