Are you interested in searching for the fuse box location in your 2013 Honda Civic? Perhaps a fuse has blown, and you are unable to use your car's headlights, or the wipers have suddenly stopped working. There is no need to worry as we have got you covered. The Honda Civic sedan has two fuse boxes, similar to any other sedan. One is situated i... more
The Ford Escape is a popular SUV, so, naturally, you want to find the fuse box location for this vehicle. There are three fuse boxes in the Ford: One is in the engine compartmentThe other is under the glove compartmentThe third is in the luggage compartmentIt is relatively easy to open either one of them. They are covered by a lid that you can pul... more
If you are looking to replace a fuse in your 2000,2001,2002,2003,2004, ..2018 Toyota Corolla, then you have come to the right place. There are generally two fuse box locations in every car, and the story is similar to the world's best-selling sedan. The first fuse box is in the engine compartment.The second one is under the instrument panel.... more
The Ford F-150 is Americas best-selling vehicle, period. As such, there is a high probability that if you are reading this, you own one, and you are searching for the fuse box location. The Ford F-150 has two fuse boxes. The primary fuse box is under the hood, and it contains high output fuses, so be very careful when dealing with them. This fus... more
Is your Chevrolet Malibu causing electrical problems? Are you looking for the fuse box location to answer your woes? Then you have come to the right place. The Chevrolet Malibu has two fuse boxes. Under the hoodInside the Interior cabin The one under the hood is fairly easy to spot. It is on the drivers side inside the engine compartment and it... more
The Honda Accord is one of the most popular vehicles in America. For the most part, it is a reliable sedan, but as is true with machines, malfunctions can happen, and it is up to you to fix them. If the issue is electrically-based, the fuse box is almost always involved. You should know the fuse box location, so you can take care of any minor elect... more
General chat about anything and everything, nothing in particular, just a place to kick back Just go to the last page and take part of the conversation. more
There are three different fuse boxes in the 2015 Chevrolet Camaro: Engine Compartment Fuse Block (under the hood)Instrument Panel Fuse Block (under the steering wheel)Rear Compartment Fuse Block (right side of the trunk) To access the engine compartment fuse block, open the hood and locate the fuse block towards the front left of the vehicle. Remov... more
There are two fuse box locations in the Chevrolet Impala, essentially in the engine bay next to the battery and another set is under the instrument panel on the drivers side - essentially underneath the steering wheel. The purpose of the fuses is to protect the wiring circuits in the vehicle from short circuits, which greatly reduces any chance of... more
Has something in your Dodge Caliber stopped working and you think it's one of the fuses? Dodge calls the fuse box the Integrated Power Module or IPM, which is located next to the air cleaner/intake under the hood. There is a label that shows what each component is and the identification of each is typically printed on the inside o... more
Hi All, We've recently compiled a list of owners manuals for various makes and models. Ford Toyota Acura Subaru Volkswagen Nissan Dodge Mazda If you own a car and can't find your original owners manual, you should be able to find it through our archives Cheers! more
Sr v6 4.0 pacemaker extractors on a 2.5 straight pipe cold air intake 5 speed manual pioneer DVD with pioneer amp fli 375w rear fli 275w front boss 10 sub Led lights all round Billet grill custom paint Rolling on bms Miami 20s Mika black pearl 5% tint rear 18% doors more
I just got an 88 Pajero and it was tapping so I replaced the lifters/ lash adjusters or whatever. It's better but not fully gone, now its kind of sounds like a diesel. when I turned the engine over without the tappet cover on, oil kind of just drizzled out of the rockers. is this normal? I also noticed that the bar that goes threw the rockers... more
Does anyone know how to retrieve photos from members rides or sale posts from way back? Now that Im an old prick, Id love to look back on the cars I used to post up here back in the olden days .... Pfa more
Have had a few buckets over the years and they always kept breaking. Always loved these cars so picked this up cheap so I could build the perfect daily. Done full head gasket kit, clutch, timing belt kit, water pump, suspension, bushes etc. So here is the build so far. Engine: 4AFE 1.6L EFI Exhaust: Cannon Suspension: Ebay coilovers Wheels: 15x8... more
So recently I got into my car and first gear (driving in auto) was making a weird sound, didn't think much of it and thought it'd go away cause the car was cold. Over the next few weeks it got progressively worse, I did try and baby the poor thing though. First and 2nd gear was now making a grinding noise and the diff would whine in revers... more
2002 1.8ltr Nissan Pulsar N16 Fellow Boosters - Last night i went for a drive, come home and my car wouldnt lock via central locking (not via remote or key) and i had to lock each door individually. I tested the manual locking button inside and still nothing. I checked that button for power to find no power. I checked out a few other accessories f... more
Hey guys, this is my GT Forester project car. In no rush to finish it so really taking my time with it. Pulled it off the road originally to pretty much rebuild the whole car. Other future mods also include WRX BC BR coilovers as the Teins don't go low enough and full Whiteline suspension. Engine: EJ205, FMIC, VF34, EBoost2, silicone inlet, STI... more
Hey i got an 87 mitsu colt that im looking to do an engine conversion on and was wondering if anyone had any ideas what would fit? Price around $1000-2000, looking for something that has fair amount of aftermarket parts on sale, might think im crazy but its something different Thanks Cain more
Hey all, A car I'd looked into awhile had a killswitch in it where by you'd put your finger on a screw (to ground) then you could start your car. Now i'm just wondering is it as simple as connecting ground wire from starter to an inconspicious screw then bob's your uncle? or is there more to it. Cheers. more
Hi i am wondering how to change the service schedule reminder on 2018 Hyundai Tuscon Active X. All the videos ive seen shows a hold to reset when it comes up which i dont. And they also have another option in the menu of service schedule. I have an option that says reset settings and when i go to that it says reset to factory. It was an ex rental s... more
I'm thinking about swapping an Rb25det into my 2wd for courier since the engine blew on me not long ago, I've seen a few around and I'm wondering if anyone on here has done it before and what kind of issues/fixes you ran into during the process? more
Looking for some advice for doing up my old mans 1986 2.4 diesel Hilux. The old boy hasnt been around for 12 years now and I want to do a bit of a tribute build with his old Lux. He was a pretty handy old bugger and used to do all the work on the old girl himself (spending as little as possible 😂) so Id really like to keep the original ... more
Engine: 3S-GE WITH RECONDITIONED YAMAHA HEAD Exhaust: EXTRACTORS TO 2.5 PIPE TO HOTDOG TO MUFFLER AND 4 TIP Suspension: STOCK WITH SUPER LOW KING SPRINGS Wheels: ORIGINAL WHITE LIGHTNING Modifications: RANDOM SHIFT BOOT AND GEAR KNOB Stereo Audio / Visual: POS HEADUNIT, ORIGINAL SPEAKERS Estimated Power: 120KW It's an amazing stor... more
Hey guys, A little help if anyone has dealt with this stuff before? I bought a 2008 Triton, 3.5l petrol with LPG conversion in Brisbane, QLD 2 weeks ago. It is my first LPG vehicle so i didn't know i needed a gas certificate to register it in my name. The previous owner didn't provide one. It came with a RWC and i drove it aro... more
So there's something in your car not working and you think the fuse is blown? A common problem for Ford Falcon BF Owners unfortunately. It could be your indicators, hazard lights, door locks, wipers, instrument cluster, or most commonly cigarette outlet. Here's the digram, but remember, if you don't have a diagram you can always pull o... more
Hey guys, Have had a lot of questions about white walls recently, How much they cost, Where to get them done etc. The idea of this thread is for all to post any info about white wallers or ask any questions about them. This should keep the forums a little bit cleaner as well as my inbox! Something's you should know about whit... more
this is my 85 vk commodore. has Ls1 conversion, motor and gearbox from a vy ss. fully engineered and permitted. midnight blue grp III kit with grp A spoiler 4L60e gearbox with 4200rpm allfast converter 234/244 .585 @ 112 edelbrock proflo xt manifold edelbrock proflo xt fuel rails 85mm polished throttle body trend hardened push rods pac beehive s... more
Have you been online looking for a legit and genuine Loan to pay off your Bills or Start Up a Business of your own? Have you being turn down by your Bank or other Lender's online? Here is a place were you can get QUICK and EASY LOAN without any delay, contact us now and and get funded asap. more
Hi guys so this is first time I've posted here I've been in the process of getting the motor rebuilt for my little Capri it is a b6t but now that it has all forged internals has ported and polished head an exeady race clutch with billet flywheel a Gt2860r turbo hanging of the side and a decent intercooler tucked behind the bumper I'm h... more
Hi i have a van that apparently has had an oil leak problem for a while. fixing not the problem. But I don't want to leave an oil slick and kill any water life by doing it at home plus it is a big job. Whole underside of car plus engine bay. Is there anywhere that i can go and degrease it myself or pay to have it done. Cheers. more
ADVICE NEEDED Ive recently snapper a rocker arm and am in the process of fixing it all but have been told that changing from hydraulic lifters to solid lifters will help prevent the same issue from happening again. I was wondering if i would also need new cams or anything else if i do decide to switch. Any help is appreciated, Thanks. more
Hi anyone, I'm new. Been reading a lot of posts from a number of years back. I have a 94 VR V6 Buick engine Commodore. As you are aware it's 130kw at the engine, I only want to increase the power, if possible to around 180kw. What does anybody recommend? more
Does any off topic readers remember the days of a troll called HULK? Was speaking to another old off topic reader and we were having giggles about the time he had personal details thrown up on here, they were the good days. more