2012 Toyota Sienna Owners Manual

1-2. Opening, closing and locking the doors Sliding doors

Vehicles without power sliding doors The sliding doors can be opened and closed using the sliding door handle. The sliding door can be locked and unlocked using the wire- less remote control, door lock switch or inside lock knob. Vehicles with power sliding doors The power sliding doors can be opened and closed using the sliding door handle, power sliding door switches or wireless remote control. The power sliding doors can be locked and unlocked using the wire- less remote control, door lock switch or inside lock knob. ■ Wireless remote control

→P. 53

■ Door lock switch

→P. 61

■ Sliding door handle

Open/close

Vehicles with power sliding doors: The sliding door will be automatically and completely opened and closed by the fol- lowing. • Pulling the outside handle. • Sliding the inside handle for- ward to close or backward to open.

67

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

■ Inside lock knobs

Unlocks Locks

■ Power sliding door switches (vehicles with power sliding

doors)

From front seats

Press the switch to open and close the following door.

The right side sliding door The left side sliding door Pressing the switch again while the door is operating will cause the operation to reverse. However, the reverse opera- tion cannot be performed for the first second after automatic operation starts, even if the switch is pressed again.

68

SIENNA_U (OM45477U)

1

From second seats

1-2. Opening, closing and locking the doors

Press the switch to open and close each sliding door.

Pressing the switch again while the door is operating will cause the operation to reverse. However, the reverse opera- tion cannot be performed for the first second after automatic operation starts, even if the switch is pressed again.

69

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

Canceling the power sliding door system (vehicles with power sliding doors)

Turn the main switch off to dis- able the power sliding door sys- tem. Off The sliding doors can only be opened and closed manually. On* The power sliding door can be opened and closed with the power sliding door switches for the front occupants or wireless remote control even if the sliding door child-protectors are locked. the switch should be visible when the switch is on.

*: Orange mark on

Locking the sliding doors from the outside without the wireless remote control

STEP 1

STEP 2

Move the inside lock knob to the lock position. Close the sliding door.

70

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

Sliding door child-protector locks

The sliding door cannot be opened by the inside door han- dle and the second seat sliding door switch when the lock is set. These locks can be set to prevent children from opening the sliding doors. Push down on each sliding door switch to lock that sliding door.

■The power sliding door can be operated when (vehicles with power

sliding doors) ●Open operation: The shift lever is in P. Close operation: The vehicle is stopped.

●The power sliding door system main switch is on. ●The power sliding door is unlocked. (Except for the wireless remote con-

trol operation or smart key system operation.)

●The sliding door child-protector lock is not set. (However, the switch for the front occupants and the outside handle still operate the power sliding door.)

71

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

■Power sliding doors

●If the power sliding door outside handle is pulled while the power sliding

door is opening or closing, the door will reverse the operation direction.

●During opening operation:

Stroking the power sliding door handle forward will reverse the direction and start closing. Stroking the handle backward will continue opening. During closing operation: Stroking the power sliding door handle backward will reverse the direc- tion and start opening. Stroking the handle forward will continue closing.

●The power sliding doors can be opened/closed manually when the power

sliding door function is canceled with the main switch.

●Vehicles without a smart key system: A buzzer sounds if you put the shift lever out of P with the engine switch in the “ON” position and the sliding door not completely closed. Vehicles with a smart key system: A buzzer sounds if you put the shift lever out of P with the “ENGINE START STOP” switch in IGNITION ON mode and the sliding door not completely closed.

●Vehicles with AUTO ACCESS SEAT: If the AUTO ACCESS SEAT has not been locked in place after being stowed, the right-hand sliding door will not close and a beep will sound twice. For details, refer to “AUTO ACCESS SEAT OWNER’S MANUAL”.

72

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

■The situations in which the sliding door does not open completely

The left side sliding door does not open completely when the fuel filler door is opened.

■Jam protection function (vehicles with power sliding doors)

●If anything obstructs the power sliding door while it is closing or opening, the power sliding door will automatically operate in the opposite direction. ●If the jam protection function operates during two consecutive opening and closing operations, the power sliding door will be stopped at that position and the power sliding door system will be canceled.

■Power sliding door brake function (vehicles with power sliding doors) When the power sliding door detects an abnormality and stops operating, power sliding door brake function may be activated. When brake function is activated, door movement is restricted by the brake and motion may appear to be not smooth. This is not malfunction. Move the door to fully closed posi- tion to reset the system and normal power sliding door function will resume.

■Sliding door closer (vehicles with power sliding doors)

In the event that the sliding door is left slightly open, the sliding door closer will automatically close it to the fully closed position.

73

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

■If the power sliding door is inoperative (vehicles with power sliding

doors) When the power sliding door detects an abnormality and stops opening and can not be completely closed manually, cancel the function as follows and close the door manually. After that, have the vehicle inspected and repaired by your Toyota dealer.

STEP 1

STEP 2

Remove the plug from the rear edge of the sliding door.

Insert a key in the hole and push the mechanical cancel lever.

■When the battery is disconnected (vehicles with power sliding doors)

The power sliding door system must be initialized in order to ensure proper operation. To initialize it, close the sliding doors completely by hand.

■Customization that can be configured at Toyota dealer

Settings (e.g. opening and closing operation) can be changed. (Customizable features: →P. 815)

74

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

CAUTION

■While driving

Observe the following precautions while driving. Failure to do so may cause a door to open unexpectedly and an occupant to fall out of the vehicle, resulting in death or serious injury. ●Ensure that all doors are properly closed. ●Always lock the doors. ●Set the sliding door child-protector locks when children are seated in the

vehicle.

●Always use a seat belt. ●Do not operate the inside handle of the doors while driving.

■When children are in the vehicle Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not leave children alone in the vehicle.

If a child is accidentally locked in the vehicle, they could have heat exhaustion.

●Do not allow a child to open or close the sliding door.

Doing so may cause the sliding door to move unexpectedly, or cause the child’s hands, head, or neck to be caught by the moving sliding door.

75

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

CAUTION

■Operating the sliding doors

Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ●When opening or closing a sliding door, thoroughly check to make sure the

surrounding area is safe.

●When opening or closing the sliding doors with windows open, keep all

body parts clear of the windows.

●If anyone is in the vicinity, make sure they are clear of the door path and let

them know that the sliding door is about to open or close.

●Do not leave the sliding door at half-opened position because the sliding door is not latched at this position. The sliding door may move unexpect- edly on an incline.

76

SIENNA_U (OM45477U)

1

CAUTION

1-2. Opening, closing and locking the doors

●When the vehicle is stopped on a slope, the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door.

●Open the sliding door fully while pas- sengers are getting on or off on a down- ward slope. Do not operate the outside handle or inside handle while the door is open as the door could suddenly close by itself causing injury.

●When closing the sliding door, take extra care to prevent your fingers etc. from being caught.

77

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

CAUTION

■Sliding door closer (if equipped)

It

●In the event that the sliding door is left slightly open, the sliding door closer will automatically close it to the fully closed position. takes several seconds before the sliding door closer begins to operate. Be careful not to catch fingers or anything else in the sliding door, as this may cause bone fractures or other serious injuries.

●Use caution when using the sliding door closer. The sliding door closer

operates even when the power sliding door system is canceled.

■Power sliding doors

Observe the following precautions when the power sliding door system is on. Failure to do so may cause death or serious injury. ●When using the door handle to open or close the power sliding door, remove your hand from the door handle immediately after starting power sliding door operation. If you leave your hand on the door handle during operation, your hand, fingers, wrist etc. may be subjected to an excessive amount of force.

●Check the safety of the surrounding area to make sure there are no obsta-

cles or anything that could cause any of your belongings to get caught.

●If anyone is in the vicinity, make sure they are clear of the door path and let

them know that the sliding door is about to open or close.

78

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

CAUTION

●If the power sliding door system is turned off with the main switch while the sliding door is operating automatically, the automatic operation is stopped. The sliding door then has to be operated manually. Take extra care when on an incline, as the sliding door may open or close unexpectedly.

●On an incline, a sliding door may close by itself after it opens automati-

cally. Make sure the sliding door is fully open and secure.

●If the operating conditions of the power sliding door are no longer met, a buzzer may sound and the sliding door may stop opening or closing. The sliding door then has to be operated manually. Take extra care when on an incline, as the sliding door may open or close abruptly.

●In the following situations, the power sliding door may detect an abnormal- ity and automatic operation may be stopped. In this case, the sliding door has to be operated manually. Take extra care when on an incline, as the sliding door may open or close abruptly. • When the sliding door contacts an obstacle • Vehicles without a smart key system:

When the battery voltage suddenly drops, such as when the engine switch is turned to the “ON” position or the engine is started during automatic operation Vehicles with a smart key system: When the battery voltage suddenly drops, such as when the “ENGINE START STOP” switch is turned to IGNITION ON mode or the engine is started during automatic operation

79

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

CAUTION

●Do not attach any accessories other than genuine Toyota parts to the power sliding door. The power sliding door may not operate, causing itself to malfunction, or the power sliding door may close again after it is opened.

●When the child-protector locks are set, make sure to turn off the power sliding door system with the main switch in order to totally disable the sys- tem.

■Jam protection function (vehicles with power sliding doors)

Observe the following precautions. Failure to do so may cause death or serious injury. ●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets caught just before the power sliding door fully closes. Be careful not to catch fingers or anything else.

●The jam protection function may not work depending on the shape of the

object that is caught. Be careful not to catch fingers or anything else.

80

SIENNA_U (OM45477U)

NOTICE

■Sliding door

1-2. Opening, closing and locking the doors

Make sure magazines are not bent or protruding from the sliding door pockets. Do not insert anything too big so that the shape of the sliding door pockets is dis- torted. Such objects may obstruct the opening/closing of the sliding doors, dam- age the sliding door pockets or the vehi- cle body, and may result in a malfunction.

■To prevent damage to your vehicle

●Vehicles with the power sliding door:

• Do not apply excessive force when the sliding door is operating. • Do not place your hand or foot near door hinges or rollers when the

sliding door is operating.

• Avoid forcibly opening the left side sliding door fully when the fuel filler

door is opened. Otherwise, the fuel filler door may be damaged.

• Take care not to damage the sensors (installed on the front edge of the

power sliding door) with a knife or other sharp object.

●Make sure there is nothing in the doorway before closing. ●Do not close the sliding door by applying the brakes. Doing so could cause

the sliding door to be damaged.

81

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors Back door

The back door can be locked and unlocked using the entry function (vehicles with a smart key system), wireless remote control or door lock switch. The back door can be opened using the back door opener. In addition, the power back door can be opened/closed using the power back door switch or wireless remote control. ■ Locking and unlocking the back door Entry function (vehicles with a smart key system) →P. 37
Wireless remote control →P. 53
Door lock switch →P. 61
■ Opening the back door from outside the vehicle Back door opener

Raise the back door while pressing the back door opener to release the lock to open the back door.

Wireless remote control (vehicles with power back door) →P. 53

82

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

■ Opening the back door from inside the vehicle (vehicles

with power back door)

Press and hold the switch to open/close the back door.

Pressing the switch again while the power back door is operating will cause the opera- tion to reverse. However, the reverse opera- tion cannot be performed for the first second after automatic operation starts even if the switch is pressed again.

As the power back door starts to open or close automatically, two beeps sound and the emergency flashers flash twice.

83

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

Back door closer (if equipped)

Press the switch to close the back door.

Pressing the switch again while the power back door is closing will cause it to open again. However, the reverse operation cannot be performed for the first second after automatic operation starts even is pressed again. A buzzer sounds twice and the emergency flashers flash twice to indicate that the back door is opening/closing.

the switch

if

Canceling the power back door system (vehicles with power back door)

Turn the main switch off to dis- able the power back door sys- tem. Off On*

*: Orange mark on

the switch should be visible when the switch is on.

84

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

■When closing the back door using the back door handle

Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it.

■Luggage compartment light

The luggage compartment light turns on when the back door is opened with the luggage compartment light switch on.

On Off

85

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

■If the back door opener is inoperative

The back door can be operated from the inside.

STEP 1

Remove the inside panel.

Move the lever.

STEP 2
Vehicles without power back door

Vehicles with power back door

86

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

■The power back door can be operated when

●The shift lever is in P. ●The back door is unlocked.

■Jam protection function (vehicles with power back door)

●If anything obstructs the power back door while it is closing or opening,

the back door will automatically operate in the opposite direction.

●If the jam protection function operates during two consecutive closing

operations, the back door will be stopped at that position.

■Back door closer (vehicles with power back door)

In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position.

■When the battery is disconnected

●The back door will be automatically locked after the battery is recon-

nected.

●The power back door (if equipped) must be initialized in order to ensure

proper operation.

STEP 1

STEP 2

Unlock the back door with the wireless remote control or door lock switch. Close the back door completely by hand.

87

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

CAUTION

■While driving

●Keep the back door closed while driving.

If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard. Make sure to close the back door before driving.

●Before driving the vehicle, make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving, causing a passenger to be thrown out of the vehicle.

●Never let anyone sit in the luggage compartment. In the event of sudden

braking or a collision, they are susceptible to death or serious injury.

■When children are in the vehicle Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not leave children alone in the luggage compartment.

If a child is accidentally locked in the luggage compartment, they could have heat exhaustion.

●Do not allow a child to open or close the back door.

Doing so may cause the back door to move unexpectedly, or cause the child’s hands, head, or neck to be caught by the closing back door.

88

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

CAUTION

■Operating the back door

Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ●Remove any heavy loads, such as snow and ice, from the back door before opening it. Failure to do so may cause the back door to fall closed again after it is opened.

●When opening or closing the back door, thoroughly check to make sure

the surrounding area is safe.

●If anyone is in the vicinity, make sure they are safe and let them know that

the back door is about to open or close.

●Use caution when opening or closing the back door in windy weather as it

may move abruptly in strong wind.

●The back door may fall if it is not opened fully. It is more difficult to open or close the back door on an incline than on a level surface, so beware of the back door unexpectedly opening or closing by itself. Make sure that the back door is fully open and secure before using the luggage compartment.

89

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

CAUTION

●When closing the back door, take extra care to prevent your fingers etc. from being caught.

●When closing the back door, make sure to press it lightly on its outer surface. If the back door handle is used to fully close the back door, it may result in hands or arms being caught.

●Do not place your hands on the back door damper stay to close the back

door, and do not hang on the back door damper stay. Doing so may cause hands to be caught or the back door damper stay to break, causing an accident.

●If a bicycle carrier or similar heavy object is attached to the back door, it may fall closed again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.

90

SIENNA_U (OM45477U)

1

CAUTION

■Back door closer (if equipped)

1-2. Opening, closing and locking the doors

It

●In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. takes several seconds before the back door closer begins to operate. Be careful not to catch fingers or anything else in the back door, as this may cause bone fractures or other serious injuries.

●Use caution when using the back door closer as it still operates when the

power back door system is canceled.

■Power back door (if equipped)

Observe the following precautions when operating the power back door. Failure to do so may cause death or serious injury. ●Check the safety of the surrounding area to make sure there are no obsta-

cles or anything that could cause any of your belongings to get caught.

●If anyone is in the vicinity, make sure they are safe and let them know that

the back door is about to open or close.

●If the operating conditions of the power back door are no longer met, a buzzer may sound and the back door may stop opening or closing. The back door then has to be operated manually. Take extra care when on an incline, as the back door may open or close abruptly.

●On an incline, the back door may fall after it opens. Make sure the back

door is fully open and secure.

91

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

CAUTION

●In the following situations, the power back door may detect an abnormality and automatic operation may be stopped. In this case, the back door has to be operated manually. Take extra care when on an incline, as the back door may open or close abruptly. • When the back door contacts an obstacle • Vehicles without a smart key system:

When the battery voltage suddenly drops, such as when the engine switch is turned to the “ON” position or the engine is started during automatic operation Vehicles with a smart key system: When the battery voltage suddenly drops, such as when the “ENGINE START STOP” switch is turned to the IGNITION ON mode or the engine is started during automatic operation

●If a bicycle carrier or similar heavy object is attached to the back door, the power back door may not operate, causing itself to malfunction, or the back door may fall closed again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an acces- sory part to the back door, using a genuine Toyota part is recommended.

92

SIENNA_U (OM45477U)

1

1-2. Opening, closing and locking the doors

CAUTION

■Jam protection function (vehicles with power back door)

Observe the following precautions. Failure to do so may cause death or serious injury. ●Although the back door stops closing when the jam protection function detects an object, take extra care as you may still be injured if part of your body is already caught.

●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets caught just before the back door fully closes. Be careful not to catch fingers or any- thing else.

●The jam protection function may not work depending on the shape of the

object that is caught. Be careful not to catch fingers or anything else.

NOTICE

■To prevent damage to the power back door

●Make sure that there is no ice between the back door and frame that would prevent movement of the back door. Operating the power back door when excessive load is present on the back door may cause a malfunc- tion.

●Do not apply excessive force to the back door while the power back door

is operating.

●Take care not to damage the sensors (installed on the right and left edges of the power back door) with a knife or other sharp object. If the sensor is disconnected, the power back door will not operate in automatic operation.

93

SIENNA_U (OM45477U)

1-2. Opening, closing and locking the doors

NOTICE

■Back door damper stays

The back door is equipped with damper stays that hold the back door in place. Observe the following precautions. Failure to do so may cause damage to the back door damper stay, resulting in malfunction.

Damper stay

●Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the damper stay rod.

●Do not touch the damper stay rod with

gloves or other fabric items.

●Do not attach any accessories other than genuine Toyota parts to the back door.

●Do not place your hand on the damper

stay or apply lateral forces to it.

■To prevent back door closer malfunction

Do not apply excessive force to the back door while the back door closer is operating.

94

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel) Front seats

Manual seat

Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Lumbar support adjustment knob (driver’s side only)

95

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Power seat

Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumbar support adjustment switch (driver’s side only)

96

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Power easy access system (vehicles with driving position memory)

When the driver enters and exits the vehicle, the driver’s seat will automatically perform the following operations:

Exiting the vehicle: When all of the following actions have been performed, the seat will move backward (auto away function): • The shift lever has been shifted to

• Vehicles without a smart key sys- tem: The engine switch has been turned off. Vehicles with a smart key system: The “ENGINE START STOP” switch has been turned off.

• The driver seat belt has been

unfastened

97

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Entering the vehicle: When either of the following actions has been performed, the seat will move forward (auto return function): • Vehicles without a smart key sys- tem: The engine switch has been turned to the “ACC” position. Vehicles with a smart key system: The “ENGINE START STOP” switch has been to ACCESSORY mode.

turned

• The driver seat belt has been fas-

tened

Active head restraints

When the occupant’s lower back presses against the seatback during a rear-end collision, the head restraint moves slightly for- ward and upward to help reduce the risk of whiplash on the seat occupant.

ITN13N065

■The auto away function for exiting the driver seat (vehicles with driving

position memory) If the seat is already close to the rearmost position, the auto away function may not operate when the driver exits the vehicle.

98

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

■Active head restraints

Even small forces applied to the seatback may cause the head restraint to move. When a locked head restraint is pushed up forcibly, the head restraint inner structure may appear. This does not indicate a problem.

During rear-end collision

Inner structure

CAUTION

■Seat adjustment

ITN13N066

●To reduce the risk of sliding under the lap belt during a collision, do not

recline the seat more than necessary. If the seat is reclined too far, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident. Adjustments should not be made while driving as the seat may unexpect- edly move and cause the driver to lose control of the vehicle.

●Manual seat: After adjusting the seat, make sure that the seat is locked in

position.

99

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats

Second seats (Tip-up seat)

Seat position adjustment lever Seatback angle adjustment lever

Second seats (Ottoman seat)

Seat position adjustment lever Seatback angle adjustment lever Ottoman angle adjustment lever

Second seats (AUTO ACCESS SEAT) Refer to “AUTO ACCESS SEAT OWNER’S MANUAL”.

100

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Third seats (manual seat)

Seatback angle adjustment strap

Third seats (power seat)

Seatback angle adjustment switch

101

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Moving a second seat for third seat access

■ Getting in the vehicle Tip-up seats

Ottoman seats

Pull the seatback angle adjust- ment lever and fold down the seatback. The cushion will tip up. The seat can slide forward. Move the seat to the frontmost position.

Pull the seatback angle adjust- ment lever and fold down the seatback. The seat can slide for- ward. Move the seat to the frontmost position.

102

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Getting out of the vehicle Tip-up seats

Ottoman seats

Pull the strap and fold down the seatback. The cushion will tip up. The seat can slide forward. Move the seat to the frontmost position.

Make sure that no passenger is seated on the second seat before pulling the strap.

Pull the strap and fold down the seatback. The seat can slide for- ward. Move the seat to the frontmost position.

Make sure that no passenger is seated on the second seat before pulling the strap. ■ After passengers have entered/exited the vehicle

Lift up the seatback and slide the seat backward until it locks.

103

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Removing the second seats

■ Removing the second outside seats (Tip-up seats) Pull the armrests up. STEP 1
Pull the seatback adjustment lever and fold down the seat- back. The cushion will tip up.

STEP 2

Slide the seat forward to a lock position.

STEP 3

Pull the release lever under the cushion and simultaneously lift the seat to remove.

104

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Removing the second outside seats (Ottoman seats) Pull the armrests up. STEP 1
the seatback adjustment Pull lever and fold down the seat- back.

STEP 2

Slide the seat to a forward lock position.

STEP 3

Pull the release lever behind the seatback straight back, then up. While moving lever up, simultaneously lift the seat to remove.

the

105

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Removing the second center seat (if equipped) STEP 1

Pull the lock release strap and fold down the second center seatback.

Make sure that the head restraint is in the lowest position.

STEP 2

STEP 3

Pull the lock release strap under the seat to remove the seat. Retract the cushion leg.

Stow the seat in the storage box of the luggage room (cushion side first). Engage the stow latch buckle to hold the seat and tighten the latch strap.

106

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel)

Installing the second seats

■ Installing the second outside seats STEP 1

Align the marking on the seat side cover to the marking on the rail cover.

Tip-up seat

Align the marking on the seat front cover to the rail.

Ottoman seat

Align the marking on the seat back cover to the rail.

107

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

STEP 2

Lower the seat and engage the latches. If you locked the seat latches unintentionally before installing securely, pull the release lever to unlock the latches. Make sure the seat is locked in place by trying to shake the seatback and lift up the seat cushion.

■ Installing the second center seats (if equipped) STEP 1

Engage the rear pins with the hooks.

Unfold the cushion leg and push down on the seat to engage the front lock.

Unfold the seatback and lock it.

Make sure the seat is locked in place by trying to shake the seat- back and lift up the seat cushion.

STEP 2

STEP 3

108

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel)

Folding down the third seats (manual seats)

■ Before folding the third seats STEP 1

lower

Fold the outside head restraints and the center head restraint to the lowest position, and stow the seat belt buckles.

ITN13N045

Stow the center seat belt. (→P. 130)

STEP 2
■ Folding down the third seatbacks

Pull the “TO FOLD/LIFT SEAT- BACK” strap and fold down the seatback.

■ Returning the third seatbacks

ITN13N046

Pull the “TO FOLD/LIFT SEAT- BACK” strap, and raise the seat- back and the outside head restraints.

ITN13N047

109

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Folding down the third seats (power seats)

You can operate the power third seats when the shift lever is in P. ■ Before folding the third seats STEP 1

Lower the center head restraints to the lowest position and stow the seat belt buckles.

ITN13N048

Stow the center seat belt. (→P. 130)

STEP 2
■ Folding down the third seatbacks

Press switch.

the

folding/returning

■ Returning the third seatbacks

ITN13N049

Press the folding/returning switch, returning switch (→P. 114) or seatback angle adjustment switch (→P. 101).

110

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Stowing the third seats (manual seats)

Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts. ■ Before stowing the third seats STEP 1

Lower the center head restraint to the lowest position, and stow the seat belt buckles.

Stow the center seat belt. (→P. 130)

STEP 2
■ Stowing the third seats STEP 1

Pull the handle to move the seat rearward. Then push the seat down.

The outside head restraints are folded automatically.

111

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

STEP 2

Push the seat against the floor and make sure locked securely. Open the flaps.

is

it

■ Before returning the third seats

Be sure to move the second seats forward from the rearmost posi- tion, as they may interfere with the third seats returning operation.

■ Returning the third seats STEP 1

Return the flaps. Pull the handle and lift up the seat rearward.

STEP 2

Push the seat forward and then engage the front leg locks.

Make sure the front and rear legs are locked securely.

STEP 3

Raise the seatback and the outside head restraints. (→P. 109)

112

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Stowing the third seats (power seats)

You can operate the power third seats when the shift lever is in P. Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts. ■ Before stowing the third seats STEP 1

Lower the center head restraints to the lowest position and stow the seat belt buckles.

ITN13N054

Stow the center seat belt. (→P. 130)

STEP 2
■ Stowing the third seats STEP 1

Press and hold switch.

the stowing

A beep sounds twice to indicate the start of the operation. The beep sounds again twice when the operation is completed.

ITN13N055

113

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

STEP 2

Open the flaps.

■ Before returning the third seats

ITN13N056

Be sure to move the second seats forward from the rearmost posi- tion, as they may interfere with the third seats returning operation.

■ Returning the third seats STEP 1

ITN13N057

Return the flaps. Press and hold the returning switch until the seat cushion is locked.

A beep sounds twice to indicate the start of the operation. The beep sounds again twice when the seats are locked in folded- down position. Make sure the front and rear legs are locked securely.

STEP 2

Raise the outside head restraints.

114

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

■Power third seat

●If the indicator light above the switches flashes three times when the fold- ing/returning switch is pressed, the folding operation will not start. Make sure the shift lever is in P.

●If any of the following conditions occur while the seat is operating, the seat operation will stop. The indicator light above the switches will flash three times and a beep will sound for about 10 seconds: • An object is caught between the seatback and seat cushion. • The stowing switch is released. • Other power third seat switch is pushed while operating the stowing

switch.

• The shift lever is moved from P when the engine switch is turned to the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is in IGNITION ON mode (vehicles with a smart key system).

If the engine is started during operating, the seat operation may also be stopped. To continue the folding operation, the seatback must be returned to its original position first.

■AUTO ACCESS SEAT (if equipped)

The AUTO ACCESS SEAT cannot be removed.

■“3RD SEAT” warning light (vehicles with power third seat)

The warning light comes on if the third seat operation is not yet complete when the engine switch is turned to the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is in IGNITION ON mode (vehicles with a smart key system).

ITN13N059

115

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

■When folding the rear seatbacks down

Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not fold the seatbacks down while driving. ●Stop the vehicle on level ground, set the parking brake and shift the shift

lever to P.

●Do not allow anyone to sit on a folded seatback or in the luggage compart-

ment while driving.

●Do not allow children to enter the luggage compartment. ●Be careful not to get any part of your body pinched by a seat.

■Seat adjustment

To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary. If the seat is reclined too far, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoul- der belt, increasing the risk of death or serious injury in the event of an acci- dent. Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.

116

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

■After returning the rear seatbacks or installing seats

Observe the following precautions. Failure to do so may result in death or serious injury. ●Make sure the seatback is securely locked by pushing it forward and rear-

ward on the top.

●Check that the seat belts are not twisted or caught in the seatback. ●Make sure the seat is locked in place by trying to shake the seatback and

lift up the seat cushion.

■Removing the second seats

●Do not leave a seat in the vehicle if it has been disengaged from the floor. ●Do not sit on or place anything on a seat that has been removed from the

vehicle.

■Stowing the third seats

●Make sure that the seat path is clear before moving the seat. Otherwise, injury may result from contact with, or by being pinched by parts of the seat.

●Manual third seats: Do not sit on the third seat when it is in the stowed

position with the seatback upright.

●Power third seats: Do not continue the stowing operation when the indica- tor above the stowing switch and returning switch comes on or flashes. An object or a person may be caught in the seat.

●Power third seats: During the stowing operation, to prevent the vehicle from moving, do not shift the shift lever out of P with the engine switch in the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch in IGNITION ON mode (vehicles with a smart key system).

117

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

■When adjusting the seat position or the ottoman (vehicles with Otto-

man seats) Make sure to leave enough space around the feet so as not to get them caught.

■When using the ottoman (vehicles with Ottoman seats)

●Do not sit on the ottoman. Seat belts may not be properly worn which may

result in death or serious injury.

●Stow the ottoman when you get in and out of the vehicle or when the otto-

man is not in use to avoid stumbling over it.

NOTICE

■To prevent damage to the seat

●Avoid putting heavy loads on a folded seat that is being used as a tempo-

rary table.

●Do not sit on or put heavy loads on a second seat that has been removed from the vehicle. The metal tips of the seat leg may be damaged, prevent- ing reinstallation of the seat.

●The second seats must be reinstalled in their original positions. If they are

installed in the wrong position, the seat locks or bezels will be damaged.

●Make sure that the path the seat will move through is clear before stowing

or returning the third seat.

●8-passenger models: Be sure to raise the stowed second center seat above the outer trim, when removing from the storage box of the luggage room.

118

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel)

NOTICE

■Stowing the seat belt

The seat belts and the buckles must be stowed before you fold down the rear seatbacks.

■To prevent an ottoman malfunction (vehicles with Ottoman seats)

●Do not place any objects in the second passenger footwell that could pre-

vent the operation of the ottoman.

●Do not place heavy luggage on the ottoman. ●Do not place anything under the ottoman when in use. There is a possibil- ity that something may get caught and cause damage when stowing the ottoman.

119

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel) Driving position memory∗

Your preferred driving position (the position of the driver’s seat and outside rear view mirrors) can be memorized and recalled with the touch of a button. It is also possible to set this function to activate automatically when the doors are unlocked. Two different driving positions can be entered into memory. ■ Entering a position to memory STEP 1

Vehicles without a smart key system Turn the engine switch to the “ON” position. Vehicles with a smart key system Turn the “ENGINE START STOP” switch to IGNITION ON mode. Adjust the driver’s seat and outside rear view mirrors to the desired positions.

STEP 2

STEP 3

Press the “SET” button, then within 3 seconds press button “1” or “2” until the signal beeps.

If the selected button has already been preset, the previ- ously recorded position will be overwritten.

∗: If equipped

120

SIENNA_U (OM45477U)

1

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Recalling the memorized position

Check that the shift lever is in P.

STEP 1

STEP 2

Vehicles without a smart key system Turn the engine switch to the “ON” position. Vehicles with a smart key system Turn the “ENGINE START STOP” switch to IGNITION ON mode.

Press button “1” or “2” to recall the desired position.

121

SIENNA_U (OM45477U)

1-3. Adjustable components (seats, mirrors, steering wheel)

Linking driving position memory with door unlock operation

Record your driving position to button “1” or “2” before performing the following: Vehicles without a smart key system Carry only the wireless remote control to which you want to link the driving position. STEP 1

Unlock the vehicle with the wireless remote control to which you want to link the driving position. Shift the shift lever to P and close the driver’s door. Turn the engine switch to the “ON” position.

STEP 2

STEP 3

Press the desired button (“1” or “2”) to recall the position. Then, while keep pressing the button, press lock switches (either lock or unlock) until the signal beeps.

the driver’s door

the driver’s door

The driving position is recalled when is unlocked using the wireless remote control and the driver’s door is opened.

122

SIENNA_U (OM45477U)

1