Download PDF Manual

05 SIENNA_U (L/O 0409)


SECTION 1− 1


OPERATION OF INSTRUMENTS AND CONTROLS Overview of instruments and controls Instrument panel overview Instrument cluster overview Indicator symbols on the instrument panel


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Instrument panel overview


1. Side defroster outlets 2. Side vents 3. Instrument cluster 4. Center vents 5. Multi−information display or garage


door opener box


6. Front personal lights 7. Power sliding door switches 8. Power back door switch 9. Conversation mirror 10. Electric moon roof switch 11. Auxiliary boxes 12. Glove box 13. Power window switches 14. Power door lock switches 15. Automatic transmission selector lever 16. Audio remote control switches 17. Hood lock release lever 18. Parking brake pedal 19. Window lock switch


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


1. Headlight, turn signal and front fog


light switches


2. Wiper and washer switches 3. Rear window and outside rear view


mirror defogger and windshield wiper de−icer switch


4. Emergency flasher switch 5. Audio system or rear view monitor system/navigation system including audio system (For the navigation system, see the separate “Navigation System Owner’s Manual”.) 6. Power outlet main switch 7. Engine immobilizer/theft deterrent


system indicator light


8. Air conditioning controls 9. Seat heater switches or auxiliary box 10. Auxiliary box 11. Cup holder and coin holder 12. Power outlets 13. Personal light main switch 14. Ignition switch 15. “TRAC OFF” switch 16. Cruise control switch or dynamic laser


cruise control switch


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


17. Dynamic laser cruise control distance


switch


18. Tilt and telescopic steering lock release


lever


19. Tire pressure warning system reset


switch


20. Power sliding door main switch


(“SLIDE DOOR OFF” switch)


21. Power back door main switch


(“BACK DOOR OFF” switch)


22. Power rear view mirror control switches 23. Power quarter window switch


(“REAR VENT” switch)


24. Headlight beam level control dial


05 SIENNA_U (L/O 0409)


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Instrument cluster overview


1. Service reminder indicators and


indicator lights


2. Speedometer 3. Engine coolant temperature gauge 4. Low fuel level warning light


5. Fuel gauge 6. Dynamic laser cruise control master


warning light


7. Dynamic laser cruise control display


8. Trip meter reset knob/instrument panel


light control knob


9. Odometer and two trip meters 10. Tachometer


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Indicator symbols on the instrument panel


or


Brake system warning light∗1


or


Anti−lock brake system warning light∗1


Driver’s seat belt reminder light∗1


Open door warning light∗1


Front passenger’s seat belt reminder light∗1


SRS warning light∗1


Discharge warning light∗1


or


Malfunction indicator lamp∗1


Low engine oil pressure warning light∗1


Vehicle stability control system/traction control system warning light∗1


Low tire pressure warning light∗1


Low windshield washer fluid level warning light∗1
Engine oil replacement reminder light∗1 (for vehicles sold in U.S.A.)


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Engine immobilizer/theft deterrent system indicator light


“AIRBAG ON” indicator light


Cruise control indicator light∗2 or dynamic laser cruise control indicator light∗3


Dynamic laser cruise control ready mode indicator light


“AIRBAG OFF” indicator light


Conventional cruise control mode indicator light


∗1: For details, see “Service reminder indicators and warning


buzzers” on page 175 in Section 1−6.


∗2: If this light flashes, see “Cruise control” on page 201 in


Section 1−7.


∗3: If this light flashes, see “Dynamic laser cruise control” on


page 203 in Section 1−7.


Headlight high beam indicator light


Turn signal indicator lights


Automatic transmission indicator lights


Slip indicator light


Traction control system off indicator light (two−wheel drive models)


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


SECTION 1− 2


OPERATION OF INSTRUMENTS AND CONTROLS Keys and Doors Keys Engine immobilizer system Wireless remote control Front doors Sliding doors Power sliding doors Back door Power back door Power windows Manual quarter windows Power quarter windows Hood Theft deterrent system Fuel tank cap Electric moon roof


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


10
13
14
22
25
28
36
37
42
46
46
47
48
50
52


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Keys (without engine immobilizer system)


Keys (with engine immobilizer system)


KEY NUMBER PLATE Your key number is shown on the plate. Keep the plate in a safe place such as your wallet, not in the vehicle. If you should lose your keys or if you need additional keys, duplicates can be made by a Toyota dealer using the key number. We recommend writing down the key num- ber and storing it in a safe place.


Your vehicle is supplied with two kinds of keys. 1. Master keys—These keys work in ev-


ery lock.


2. Sub key—This key will not work in the


glove box.


To protect items locked in the glove box when using valet parking, leave the sub key with the attendant. Since the front doors and sliding doors can be locked without a key, you should always carry a spare master key in case you accidentally lock your keys inside the vehicle.


10


Your vehicle is supplied with two kinds of keys. 1. Master keys (black)—These keys work in every lock. Your Toyota dealer will need one of them to make a new key with a built−in transponder chip.


2. Sub key (gray)—This key will not work


in the glove box.


A transponder chip for engine immobilizer system has been placed in the head of the master and sub keys. These chips are needed to enable the system to function correctly, so be careful not to lose these keys. If you make your own duplicate key, you will not be able to cancel the system or start the engine.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


To protect items locked in the glove box when using valet parking, leave the sub key with the attendant. Since the front doors and sliding doors can be locked without a key, you should always carry a spare master key in case you accidentally lock your keys inside the vehicle.


NOTICE


the


When using a key containing a trans- ponder chip, observe following precautions: z When starting the engine, do not use the key with a key ring resting on the key grip and do not press the key ring against the key grip. Otherwise the engine may not start, or may stop soon after it starts.


z When starting the engine, do not use the key with other transponder keys around (including keys of oth- er vehicles) and do not press other key plates against the key grip. Otherwise the engine may not start, or may stop soon after it starts. If this happens, remove the key once and then insert it again after remov- ing other transponder keys (includ- ing keys of other vehicles) from the ring or while gripping or covering them with your hand to start the engine.


11


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


z Do not cover the key grip with any material that cuts off electromagnet- ic waves.


z Do not knock the key hard against


other objects.


z Do not leave the key exposed to high temperatures for a long period, such as on the dashboard and hood under direct sunlight. z Do not put the key


in water or


wash it in an ultrasonic washer.


z Do not bend the key grip.


z Do not use the key with electromag-


netic materials.


12


KEY NUMBER PLATE Your key number is shown on the plate. Keep the plate in a safe place such as your wallet, not in the vehicle. If you should lose your keys or if you need additional keys, duplicates can be made by a Toyota dealer using the key number. We recommend writing down the key num- ber and storing it in a safe place.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Engine immobilizer system


immobilizer system


The engine is a theft prevention system. When you in- sert the key in the ignition switch, the transponder chip the key’s head transmits an electronic code to the ve- hicle. The engine will start only when the electronic code in the chip corre- sponds to the registered ID code for the vehicle.


in


indicator


light will start


The system is automatically set when the key is removed from the ignition switch. The flashing to show the system is set. If any of the following indicator conditions occurs, contact your Toyota dealer. D The


light stays on except when the theft deterrent system is set- ting or activating. (See “Theft deterrent system” on page 48 in this Section.)


indicator


D The indicator light does not start flash- ing when the key is removed from the ignition switch.


D The indicator light flashes inconsistent-


ly.


Inserting the registered key in the ignition switch automatically cancels the system, which enables the engine to start. The indicator light will go off. For your Toyota dealer to make you a new key with built−in transponder chip, your dealer will need your key number and master key. However, there is a limit to the number of additional keys your Toyota dealer can make for you. If you make your own duplicate key, you will not be able to cancel the sys- tem or start the engine.


NOTICE


remove or disas- Do not modify, immobilizer sys- semble the engine tem. If any unauthorized changes or modifications are made, proper opera- tion of the system cannot be guaran- teed.


13


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


For vehicles sold in U.S.A.


For vehicles sold in Canada


Wireless remote control—


This device complies with RSS−210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interfer- ence, and (2) this device must accept any interference that may cause undesired operation of the device.


interference,


including


FCC ID: MOZ RI−21BTY MADE IN U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause unde- sired operation.


CAUTION


Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the user’s authority to operate the equip- ment.


14


Type A


Type B


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


The wireless remote control system is designed to lock or unlock all the side doors and back door, or activate the panic mode from a distance within approximately 1 m (3 ft.) of the vehicle. On some models, the system also al- lows you to activate the theft deterrent system from the same distance. When you operate any switch, push slowly and securely. The wireless remote control transmitter is an electronic component. Observe the fol- lowing instructions in order not to cause damage remote control to transmitter. D Do not leave the transmitter in places the temperature becomes high


the wireless


where such as on the dashboard.


it


D Do not disassemble it. D Avoid knocking


it hard against other


objects or dropping it.


D Avoid putting it in water. You can use up to 4 wireless remote con- the same vehicle. trol Contact your Toyota dealer for detailed information.


transmitters


for


If the wireless remote control transmitter does not actuate the doors or alarm, or operate from a normal distance: D Check for closeness to a radio trans- mitter such as a radio station or an airport which can interfere with normal operation of the transmitter.


D The battery may have been consumed. Check the battery in the transmitter. To replace the battery, see “—Replacing battery” on page 20.


If you lose your wireless remote control transmitter, contact your Toyota dealer as soon as possible to avoid the possibility of theft, or an accident. (See “If you lose your wireless remote control transmitter” on page 439 in Section 4.)


MADE IN U.S.A. This complies with Part 15 of the FCC rules. Operation is subject to the follow- ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause unde- sired operation.


15


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


Type C


1. Lock switch 2. Unlock switch 3. Sliding door open switch (right side) 4. Sliding door open switch (left side) 5. Back door open switch 6. Alarm switch


05 SIENNA_U (L/O 0409)


—Locking and unlocking doors


Locking operation (type A)


Locking operation (type B or C)


Unlocking operation (type A)


Unlocking operation (type B or C)


16


this


To lock and unlock all the doors, push the switches of the transmitter slowly and securely. To lock: Push the lock switch. All the side doors and back door are locked simulta- neously. At time one beep will be heard, turn signal lights will flash once. Check to see that the doors are securely locked. If any of the side doors or back door is not securely closed, or if the key is in the ignition switch, locking cannot be per- formed by the lock switch and a beep will sound continuously for 10 seconds. How- ever, if the key is in the ignition, a beep will not sound. To stop the beep, close all the side doors and back door securely or push the un- lock switch. The buzzer can be disabled. For details, contact your Toyota dealer. To unlock: Push the unlock switch once to unlock only the driver’s door. Pushing the switch twice within 3 seconds unlocks all the side doors and back door simulta- neously. Each time the unlock switch is pushed, two beeps will be heard, turn sig- nal lights will flash twice.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


lights and


This double switch operation to unlock all the side doors and back door can be changed to a single switch operation. For details, contact your Toyota dealer. When the unlock switch is pressed, the front personal ignition switch light come on. The lights remains on for about 15 seconds unless any of the side doors or back door are opened then and closed. (For further information, see “Front personal lights” on page 164 and/or “Igni- tion switch light” on page 166 in Section 1−5.) You have 30 seconds to open a door after using the wireless remote unlock feature. If a door is not opened by then, all the side doors and back door will automatical- ly lock again. The lock function can be changed. For details, con- tact your Toyota dealer. is kept If pressed in, the locking or unlocking opera- tion is not repeated. Release the switch and then push again.


lock or unlock switch


the automatic door


timing


the


for


05 SIENNA_U (L/O 0409)


—Opening and closing sliding doors


The following adjustments can be made in this system. For details, contact your Toyota dealer. D Cancelling the wireless door locking or


unlocking function


D Cancelling the flash of the turn signal


lights


D Cancelling the beep sound


Right side power sliding door (type A)


Right side power sliding door (type B or C)


17


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


The sliding door operation by the wireless remote control can be changed or dis- abled. For details, contact your Toyota dealer.


Opening operation can be performed by the switches under the following conditions only: D The sliding door is unlocked. D The power sliding door system is on. (The “SLIDE DOOR OFF” switch on the instrument panel is pushed out.)


D The key is not in the ignition switch. D The sliding door is between the fully− closed position and half−opened posi- tion.


Left side power sliding door (type C only)


the sliding door open


Push and hold the switch of the wire- less remote control transmitter about one second. The power sliding door opens and closes completely. Right side power sliding door— To open: Push switch. (right side) To close: Push switch (right side) again. Left side power sliding door— To open: Push switch. (left side) To close: Push switch (left side) again.


the sliding door open


the sliding door open


the sliding door open


the


fuel


The sliding door stops at the half−opened position when the window is opened more than about 15 cm (6 in.). The left side power sliding door does not operate when is opened. Closing operation can be performed by the wireless remote control switches under the following conditions only: D The power sliding door system is on. (The “SLIDE DOOR OFF” switch on the instrument panel is pushed out.)


filler door


D The key is not in the ignition switch. D The sliding door is between the fully− opened position and half−opened posi- tion.


18


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


—Opening and closing back door (type B and C)


Type B


Type C


Push and hold the back door open switch on the wireless remote control transmitter for about one second. The power back door opens and closes completely. When closing or opening the back door, two beeps will be heard and the turn sig- nal lights will flash twice. Opening operation can be performed by the switch under the following conditions only: D The back door is unlocked. D The power back door system


is on. (The “BACK DOOR OFF” switch on the instrument panel is pushed out.)


D The key is not in the ignition switch. D The back door is between the fully− closed position and half−opened posi- tion.


Closing operation can be performed by the switch under the following conditions only: is on. D The power back door system (The “BACK DOOR OFF” switch on the instrument panel is pushed out.)


D The key is not in the ignition switch. D The back door is between the fully− opened position and half−opened posi- tion.


The back door operation by the wireless remote control can be changed or dis- abled. For details, contact your Toyota dealer.


19


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


—Activating alarm


The alarm does not work when the ignition key is in the “ON” position. This alarm function can be disabled. For details, contact your Toyota dealer.


the horn


Pushing and holding the alarm switch blows intermittently and flashes the headlights, tail lights and turns on the front personal lights. The alarm switch is used to deter vehicle theft when you witness anyone attempting to break into or damage your vehicle. The alarm will last for one minute. To stop alarm midway, do the following: D Push any of the switch on the wireless


remote control transmitter.


D Lock or unlock either front doors or


back door with the key.


D Turn the ignition key from the “LOCK”


to “ON” position.


20


—Replacing battery For replacement, use a CR2032 lithium battery or equivalent.


CAUTION


Special care should be taken to pre- vent small children from swallowing the removed transmitter battery or components.


NOTICE


z When replacing the transmitter bat- tery, be careful not to lose the com- ponents.


z Replace only with


the same or equivalent type recommended by a Toyota dealer.


z Dispose of used batteries according


to the local laws.


Replace the transmitter battery by follow- ing these procedures:


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


1. Using a coin or equivalent, open the


2. Remove the discharged transmitter bat-


3. Put in a new transmitter battery with


transmitter case.


tery.


NOTICE


Do not bend the terminals.


positive (+) side up.


Close the transmitter case securely.


NOTICE


z Make sure


the positive side and negative side of the transmitter bat- tery are faced correctly.


z Do not replace the battery with wet hands. Water may cause unexpected rust.


z Do not touch or move any compo- nents inside the transmitter, or it may interfere with proper operation.


21


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Front doors


z Be careful not to bend the electrode when inserting the transmitter bat- tery and that dust or oils do not adhere to the transmitter case.


z Close the transmitter case securely.


When either front door is unlocked with a key, the front personal lights and ignition switch light will come on and remain on for about 15 seconds before fading out. (For details, see “Front personal lights” on page 164 and “Ignition switch light” on page 166 in Section 1−5.)


replacing battery, check


the After transmitter operates properly. If the trans- mitter still does not operate properly, con- tact your Toyota dealer.


that


LOCKING AND UNLOCKING WITH KEY Insert the key into the keyhole and turn it. To lock: Turn the key forward. To unlock: Turn the key backward. All the side doors and back door lock and unlock simultaneously with either front door. In the driver’s door lock, turning the key once will unlock the driver’s door and twice the doors simultaneously. This double key turning operation to un- lock all the side doors and back door can be changed to a single key turning opera- tion. For details, contact your Toyota deal- er.


in succession will unlock all


22


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


CAUTION


Do not pull the inside handle of the front doors while driving. The doors will open and an accident may occur. Toyota strongly recommends that all children be placed in the rear seat of the vehicle.


Closing the door with the lock knob in the lock position will also lock the door. Be careful not to lock your keys in the ve- hicle. The front doors cannot be locked if you leave the key in the ignition switch.


Driver’s side


LOCKING AND UNLOCKING WITH INSIDE LOCK KNOB Move the lock knob. To lock: Push the knob forward. To unlock: Pull the knob backward. The front doors can be opened by pulling the inside handles even if the lock knobs are in the locked position.


Front passenger’s side


23


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


The power door lock switch can be reset in the following ways. D Turn the ignition key to “ON”. D Unlock all


the side doors and back door with the key or wireless remote control transmitter.


D Unlock the driver’s door or front pas- lock the doors the power door


senger’s door with knob, and then unlock all and back door with lock switch.


inside


the


CAUTION


Before driving, be sure that the doors are closed and locked, especially when small children are in the ve- hicle. Along with the proper use of locking the doors helps seat belts, prevent the driver and passengers from being thrown out from the ve- hicle during an accident. It also helps prevent the doors from being opened unintentionally.


lock: Push the switch down on the


LOCKING AND UNLOCKING WITH POWER DOOR LOCK SWITCH Push the switch. To front side. To unlock: Push the switch down on the rear side. Operating the switch simultaneously locks or unlocks all the side doors and back door. If you do either of the following, no side door or back door can be unlocked with the power door lock switch. D Lock all the side doors and back door with the key or wireless remote control transmitter when all the side doors and back door are closed.


D Open the driver’s door or front passen- ger’s door and move the inside lock knobs of both front doors to the lock position, then close the front doors.


24


—Automatic door locking and unlocking functions You can set the following auto door locking and unlocking functions. (a) Locking linked with the shift posi-


tion All the side doors and back door are locked automatically when the selector le- ver is moved out of the “P” position with the ignition switch in the “ON” position. (b) Unlocking linked with the shift posi-


tion


All the side doors and back door are un- locked automatically when the selector le- ver is moved to the “P” position with the ignition switch in the “ON” position. (c) Locking


linked with


the vehicle


speed the side doors and back door are All locked automatically when the vehicle speed reaches 20 km/h (12 mph) or high- er. However, if any door is unlocked dur- ing driving, this auto locking function will not operate until is opened once.


the unlocked door


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


(d) Unlocking linked with opening the


driver’s door


All the side doors and back door are un- locked automatically when the driver’s door is opened within 10 seconds after the ignition switch is turned from “ON” to the “ACC” or “LOCK” position. Setting the functions 1. Close all the side doors and back door. 2. Turn the ignition switch to the “ON”


position.


3. Within 10 seconds after


ignition switch is turned to the “ON” position;


the


D To set function (a)


Push and hold the front of the driver’s side power door lock switch for 5 sec- onds with the selector lever in the “P” position.


D To set function (b)


Push and hold the rear of the driver’s side power door lock switch for 5 sec- onds with the selector lever in the “P” position.


D To set function (c)


Push and hold the front of the driver’s side power door lock switch for 5 sec- onds with in any position except “P”.


the selector


lever


05 SIENNA_U (L/O 0409)


D To set function (d)


Sliding doors (non−powered)


Push and hold the rear of the driver’s side power door lock switch for 5 sec- onds with in any position except “P”.


the selector


lever


All the side doors and back door automati- cally lock and unlock when you release the power door lock switch. This indicates that the function is set. If all the doors do not lock and unlock, the time the switch was held may have been too short or too long. Perform the procedure over again starting from step 1. If you want to cancel a function, repeat the procedure. Each time you perform the procedure, is set or can- celled.


function


the


LOCKING AND UNLOCKING WITH INSIDE LOCK KNOB Move the lock knob. To lock: Move the knob forward. To unlock: Move the knob backward. Closing the sliding door with the lock knob in the lock position will also lock the slid- ing door. Be careful not to lock your keys in the vehicle.


25


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


CLOSING THE FULLY−OPENED SLIDING DOOR To close the fully−opened sliding door, pull the then close the door.


inside or outside handle and


CAUTION


Before driving, be sure that the doors are closed and locked, especially when small children are in the ve- hicle. Along with the proper use of seat belts, locking the doors helps prevent from being thrown out from the vehicle during an accident. It also helps prevent the doors from being opened unintention- ally.


the passengers


26


CAUTION


D When closing the sliding door, con- firm safety of the area around. Keep the heads, hands and other parts of the bodies of all occupants away from the sliding door. Other- wise, the closing door may cause an unexpected serious injury.


the door will slide


D When the vehicle is stopped on a slope, faster when opening or closing, so be es- pecially careful that the passengers do not get hit or pinched by the door.


the door


D When stopping on a downward slope, open fully while passengers are getting on or off. Do not pull the outside handle or inside handle while is open as the door could suddenly close by itself causing injury.


the door


NOTICE


Do not close the sliding door by ap- plying the brakes. Doing so could cause the door to be damaged.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


When the fuel filler door is opened, the left side siding door will not open. Close the fuel filler door securely and then operate the sliding door.


NOTICE


Avoid forcibly opening the left side sliding door fully when the fuel filler door is opened. Otherwise, the fuel filler door may be damaged.


the sliding door window


When is opened more than about 15 cm (6 in.), the sliding door will stop at half− opened position reasons. Close the window and then operate the sliding door.


for safety


CAUTION


latched at this position.


Do not leave the sliding door at half− opened position because the door is not If the vehicle is stopped on a downward slope, it may move and cause an un- expected injury.


SLIDING DOOR CHILD−PROTECTORS Open the sliding door fully and move the lock lever to the “LOCK” position as shown on the label. Then close the sliding door. If the child−protector is locked, you cannot open the sliding door from the inside. We recommend using feature whenever small children are in the vehicle.


this


27


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Power sliding doors—


On


Off


POWER SLIDING DOOR MAIN SWITCH (“SLIDE DOOR OFF” switch) This switch is used to turn on and off the power sliding door system. In order to operate the power sliding door, the “SLIDE DOOR OFF” switch on the in- strument panel must be pushed out. (The orange line on the top of the switch indicates that the power sliding door system is on.) To disable the pow- er sliding door feature, push in the switch.


28


When the power sliding door system is on, you can open and close the sliding door with the power sliding door switches on the overhead console or wireless re- mote control transmitter even if the sliding door child−protector is locked. When the power sliding door system is off, you can open and close the sliding door by the same operations as non−pow- ered sliding door. The sliding door closer is operative even if the power sliding door system is off. See page 32 about sliding door closer.


CAUTION


D Do not leave small children or pets in your vehicle. They unattended could operate the power sliding door and injure themselves or oth- ers. Turn off the power sliding door system when the power sliding door is not in use.


D When jacking up the vehicle, turn off the power sliding door system and close the sliding door com- pletely.


NOTICE


When your vehicle goes through an automatic car wash, make sure the power sliding door system is off.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


CAUTION


Before driving, be sure that the doors are closed and locked, especially when small children are in the ve- hicle. Along with the proper use of seat belts, locking the doors helps prevent from being thrown out from the vehicle during an accident. It also helps prevent the doors from being opened unintention- ally.


the passengers


LOCKING AND UNLOCKING WITH INSIDE LOCK KNOB Move the lock knob. To lock: Move the knob forward. To unlock: Move the knob backward. Closing the sliding door with the lock knob in the lock position will also lock the slid- ing door. Be careful not to lock your keys in the vehicle.


—Operation of power sliding door The power sliding door can be operated automatically in the following ways: D Operates with the power sliding door


switches inside the vehicle


D Operates with the wireless remote con-


trol transmitter


D Assists operation with the outside or


inside handle by hand


the


The power sliding door system can be canceled by “SLIDE DOOR OFF” switch. When the power sliding door system is on, if you shift out of “P” with the ignition key in the “ON” position and the sliding door is not completely closed, a buzzer will sound.


CAUTION


D Careful attention is needed so as not to get your fingers trapped as the sliding door automatically opens or closes.


D Never allow a child to operate the


sliding door.


29


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


NOTICE


Do not apply excessive force when the sliding door is operated automati- cally. Otherwise, the power sliding door system may be damaged.


You can cause a beep to sound when the power sliding door is opened or closed. For details, contact your Toyota dealer.


Front overhead console


OPERATING WITH THE POWER SLIDING DOOR SWITCHES To open the door, push the switch. To close the door, push the switch once again. The door opens and closes com- pletely. Switches on the front overhead con- sole:


” switch—To operate


“ door


the


left side


” switch—To operate the right side


“ door


Switches on the center pillar:


“PWR DOOR” switch—To operate each side door


Opening operation can be performed by the switches under the following condi- tions: D The sliding door is unlocked. D The power sliding door system is on. is


“SLIDE DOOR OFF” switch


(The pushed out.)


Center pillar


D The sliding door is between the fully− closed position and half−opened posi- tion.


30


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


CAUTION


If you shift the automatic transmis- sion selector lever out of “P” and accelerate before the power sliding door is closed completely, the sliding door may reverse to the open posi- tion. A child or others could fall out of the vehicle and be injured. Always make sure the power sliding door is closed and latched before you start driving.


D When the ignition key is in the “ON” position, the transmission selector lever must be in “P”.


D The


child−protector


is


unlocked.


(switches on the center pillar only)


Closing operation can be performed by the switches under the following condi- tions: D The power sliding door system is on. is


“SLIDE DOOR OFF” switch


(The pushed out.)


D The sliding door is between the fully− opened position and half−opened posi- tion.


Left and right side power sliding door models—The left side power sliding door does not operate when the fuel filler door is opened. The length of time required to push the switches for operating the sliding door can be changed. For details, contact your Toyota dealer.


” or “


THE WIRELESS


OPERATING WITH REMOTE CONTROL TRANSMITTER To open or close the door, push the ” switches on the wire- “ less remote control transmitter about one second. (Only when the power slid- ing door system is on.) For details, see “Wireless remote control” on page 14
in this Section. ASSISTS THE OUTSIDE OR INSIDE HANDLE BY HAND When the power sliding door system is on (the “SLIDE DOOR OFF” switch is pushed out), if you pull the outside handle or slide the the sliding door will automatically and completely open or close. When the power sliding door system is off, the sliding door can be operated manually by the outside or inside handle.


OPERATION WITH


inside handle,


31


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


inside or outside handle and


CLOSING THE FULLY−OPENED SLIDING DOOR To close the fully−opened sliding door, pull the then close the door. Sliding door closer: When the sliding door has not been fully closed, it is auto- matically closed completely even the power sliding door system is off.


if


CAUTION


D Careful attention is needed so as not to get your fingers trapped as the automatically closes when it has not been fully closed.


sliding


door


D Never allow a child to operate the


sliding door.


NOTICE


Do not apply excessive force when the sliding door closer is operating. Otherwise, the sliding door closer may be damaged.


32


JAM PROTECTION FUNCTION If anything with sufficient resistance ob- structs the power sliding door while it is closing or opening, the sliding door will automatically reverse to the opposite di- rection. However, if the power sliding door is between fully− opened positions while it is opening, the door will stop at that position. If function operates continuously at the closing operation more than 2 the sliding door will be stopped at that position and the power sliding door system will be canceled.


the half−opened and


jam protection


times,


the


Before operating the power sliding door, make sure there is nobody near the slid- ing door. Make sure the sliding door stops at the fully−opened position, and then al- low the passengers to get in and out of the vehicle. The resistance must be as strong as the force of the moving door, or stronger. As the sliding door approaches fully− closed or fully−opened position, its moving force increases significantly. The jam protection function may not work if something gets caught just before the sliding door is fully closed. If the sliding door receives a strong im- pact, this function may operate even if nothing is caught.


the


CAUTION


The power sliding door could injure people if they are caught in the door path. When using the power sliding door, observe the following: D Never try jamming any part of your jam protection


body to make the function work intentionally.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


—Power sliding door cautions


In any of


the battery.


If the battery is disconnected or run down, the power sliding door system may not work after you reconnect, replace or recharge these cases, close the sliding doors completely by hand to normalize the power sliding door system. If the power sliding door system does not operate properly after the above proce- dure, there may be a problem in the sys- tem. Contact your Toyota dealer.


D The


jam protection


function may not work if something gets caught just before the sliding door is fully closed.


D Before you close the power sliding door, always make sure there is no- body around it. Also make sure the heads, hands and other parts of the bodies of all occupants are kept completely If someone’s neck, head or hands get caught in a closing door, it could result injury. When anyone closes the power slid- ing door, make sure he or she oper- ates the door safely.


in death or serious


the vehicle.


inside


NOTICE


Objects caught in the path of the slid- ing door may be damaged. Make sure there is nothing in the doorway be- fore closing the sliding door.


CAUTION


D When closing the sliding door, con- firm safety of the area around. Keep the heads, hands and other parts of the bodies of all occupants away from the sliding door. Other- wise, the closing door may cause an unexpected serious injury.


the door will slide


D When the vehicle is stopped on a slope, faster when opening or closing, so be es- pecially careful that the passengers do not get hit or pinched by the door.


33


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


the door


D When stopping on a downward slope, open fully while passengers are getting on or off. Do not pull the outside handle or inside handle while is open as the door could suddenly close by itself causing injury.


the door


NOTICE


Do not close the sliding door by ap- plying the brakes. Doing so could cause the door to be damaged.


When the fuel filler door is opened, the left side sliding door will not open. Close the fuel filler door securely and then operate the sliding door.


NOTICE


Avoid forcibly opening the left side sliding door fully when the fuel filler door is opened. Otherwise, the fuel filler door may be damaged.


34


the sliding door window


When is opened more than about 15 cm (6 in.), the sliding door will stop at half− opened position reasons. Close the window and then operate the sliding door.


for safety


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


—Sliding door child−protectors


CAUTION


Make sure to turn off the power slid- ing door system after the child−protectors.


locking


Open the sliding door fully and move the lock lever to the “LOCK” position as shown on the label. Then close the sliding door. When the child−protector is locked, you cannot open the sliding door by the inside door handle. We recommend using this feature whenever small children are in the vehicle.


CAUTION


When the power sliding door ON—Do not leave the sliding door at half− opened position because the door will unlock after 30 minutes. If the vehicle is stopped on a downward slope, it may move and cause an unexpected injury. When the power sliding door OFF— Do not leave the sliding door at half− opened position because the door is not If the vehicle is stopped on a downward slope, it may move and cause an un- expected injury.


latched at this position.


NOTICE


When the power sliding door ON—To prevent the battery from being dis- charged, do not leave the sliding door at half−opened position.


35


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Back door (non−powered)


lights and


front personal


When all the side doors and back door are unlocked simultaneously with a key, the ignition switch light will come on and remain on for about 15 seconds before fading out. (For details, see “Front personal lights” on page 164 and “Ignition switch light” on page 166 in Section 1−5.) If the back door opener does not operate, see “If you cannot operate back door opener” on page 440 in Section 4. If the battery is disconnected or run down, the back door will be automatically locked after you reconnect, replace or re- charge the battery. Be careful not to lock your keys in the vehicle.


To open the back door, push up the back door opener and raise the door. The back door can be opened when the vehicle is stopped. The back door can be locked or unlocked in the following ways. D Operate


lock switch. (See “Front doors” on page 22 in this Section.) D Operate


remote control. (See “Wireless remote control” on page 14 in this Section.)


the power door


the wireless


D All the side doors and back door are locked and unlocked simultaneously with “Front doors” on page 22 in this Section.)


the driver’s door.


(See


36


When closing the back door, the inside strap can be used to make the reach easier. To close the back door, lower it and press down on it. After closing the back door, try pulling it up to make sure it is secure- ly closed. See “—Stowage precautions” on page 399
in Section 2 for precautions when loading luggage.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


CAUTION


Keep the back door closed while driv- ing. This not only keeps the luggage from being thrown out but also pre- vents exhaust gases from entering the vehicle.


NOTICE


To avoid damage to the back door dampers, do not apply any force, paint or let any other foreign matter on them.


Power back door— —“BACK DOOR OFF” switch


On


Off


This switch is used to turn on and off the power back door system. In order to operate the power back door, the “BACK DOOR OFF” switch on the in- strument panel must be pushed out. line on the top of the (The orange switch indicates that the power back door system is on.) To disable the pow- er back door the switch.


feature, push


in


CAUTION


D Do not leave small children or pets unattended in your vehicle. They could operate the power back door, and anyone around the back door could be injured. Turn off the power back door system when the power back door is not in use.


D When jacking up the vehicle, turn off the power back door system and close the back door completely.


NOTICE


When your vehicle goes through an automatic car wash, make sure the power back door system is off.


37


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


—Automatic operation (power back door—ON) The power back door can be operated automatically in the following ways: D Operates with


the power back door


switch on the overhead console


D Operates with the wireless remote con-


trol transmitter


NOTICE


Do not apply excessive force when the back door is operated automati- cally. Otherwise, the power back door system may be damaged.


is


the


system


canceled,


D Assists closing by hand The power back door system can be can- celed by the “BACK DOOR OFF” switch. When see “—Manual operation” on page 41 in this Section. When closing or opening the back door automatically, two beeps will be heard and the turn signal lights will flash twice. The beep sound can be changed. For de- tails, contact your Toyota dealer.


CAUTION


D Careful attention is needed so as not to get your fingers trapped as the back door automatically closes. D Never allow a child to operate the


back door.


38


OPERATING WITH THE POWER BACK DOOR SWITCH To open the door, push and hold the ” switch on the overhead con- “ sole about one second. To close the door, push this switch once again. The door opens and closes completely.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


Opening operation can be performed by the switch under the following condi- tions: D The back door is unlocked. D The power back door system


“BACK DOOR OFF” switch


is on. is


(The pushed out.)


D The back door is between in the fully− closed position and half−opened posi- tion.


D When the ignition key is in the “ON” position, the transmission selector lever must be in “P”.


Closing operation can be performed by the switch under the following condi- tions: D The power back door system


“BACK DOOR OFF” switch


is on. is


(The pushed out.)


D The back door is between in the fully− opened position and half−opened posi- tion.


The time of pushing the switches for oper- ating the back door can be changed. For details, contact your Toyota dealer.


05 SIENNA_U (L/O 0409)


(Only when


THE WIRELESS


OPERATING WITH REMOTE CONTROL TRANSMITTER To open or close the door, push and hold the “ ” switch on the wireless remote control transmitter about one second. the power back door system is on.) For details, see “Wireless remote control” on page 14
in this Section. ASSISTS CLOSING BY HAND When the power back door system is on (the “BACK DOOR OFF” switch is pushed out), if you move the back door about 10—15 cm (4—6 in.) from its fully−opened position, the back door will automatically and completely close. When the power back door system is off, the back door can be closed manually. The assisting function when closing the back door can be disabled and the assist- ing function when opening the back door can be added. For details, contact your Toyota dealer.


JAM PROTECTION FUNCTION If anything with sufficient resistance ob- structs the power back door while it is closing or opening, the back door will au- tomatically reverse to the opposite direc- tion. If function operates continuously at the closing operation more than 2 the back door will be stopped at that position.


jam protection


times,


the


39


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


Before operating the power back door, make sure there is nobody near the back door. The resistance must be as strong as the force of the moving door, or stronger. As the back door approaches the fully−closed or fully−opened position, its moving force increases significantly. The jam protection function may not work if something gets caught just before the back door is fully closed. If the back door receives a strong impact, this function may operate even if nothing is caught.


40


CAUTION


The power back door could injure people if they are caught in the door path. When using the power back door, observe the following: D Never try jamming any part of your jam protection


body to make the function work intentionally.


D The


jam protection


function may not work if something gets caught just before the sliding door is fully closed.


D Before you close the power back door, always make sure there is no- body around it. If someone’s neck, head or hands get caught in a clos- ing door, it could result in death or serious injury. When anyone closes the power back door, make sure he or she operates the door safely.


NOTICE


Objects caught in the path of the back door may be damaged. Make sure there is nothing in the doorway before closing the back door.


If the battery is disconnected or run down, the back door will be automatically locked and the power back door system may not work after you reconnect, replace or recharge the battery. In any of these cases, normalize the power back door system by following procedure. 1. Unlock


the key, wireless remote control transmitter or power door lock switch.


the back door with


2. Close hand.


the back door completely by


If the power back door system does not operate properly after the above proce- dure, there may be a problem in the sys- tem. Contact your Toyota dealer.


2005 SIENNA from Sep. ’04 Prod. (OM45431U)


05 SIENNA_U (L/O 0409)


—Manual operation (power back door—OFF)


lights and


front personal


When all the side doors and back door are unlocked simultaneously with a key, the ignition switch light will come on and remain on for about 15 seconds before fading out. (For details, see “Front personal lights” on page 164 and “Ignition switch light” on page 166 in Section 1−5.) If the back door opener does not operate, see “If you cannot operate back door opener” on page 440 in Section 4. If the battery is disconnected or run down, the back door will be automatically locked after you reconnect, replace or re- charge the battery. Be careful not to lock your keys in the vehicle.


To open the back door, push up the back door opener and raise the door. The back door can be opened when the vehicle is stopped. The back door can be locked or unlocked in the following ways. D Operate


lock switch. (See “Front doors” on page 22 in this Section.) D Operate


remote control. (See “Wireless remote control” on page

Loading...
x