2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
—DVD player operation switches
The “DVD Hint!” screen appears when the DVD mode is first selected after you turn the ignition key to the “ACC” or “ON” position. Push the “OK” switch when you read the message.
The DVD player can be operated with the controller buttons directly. 1. “DVD” button 2. “RETURN” button 3. “MENU” button 4. “AUDIO” button 5. “SUB TITLE” button 6. “ANGLE” button 7. “SET UP” button 8. “SEARCH” button 9. “TOP MENU” button 10. “
”, “"”, “AA” and “""” buttons
Controller
DVD player unit
268
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
The player can also be operated with the switches on the screen. To operate the switches on the screen, select the switch by the joystick and push the “ENT” button. You cannot select the switches on the screen by touching them directly. When the switch is selected by the joys- tick, the outline of the switch changes to blue. Push the switch will be highlighted in green.
“ENT” button, and
the
05 SIENNA_U (L/O 0409)
TURNING THE OPERATION SWITCHES ON AND OFF To turn on the operation switches, push the “CURSOR” button on the controller.
Controller
DVD player unit
269
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
Top page (DVD video operation switch)
Top page (DVD audio operation switch)
Top page (video CD)
Second page switch)
270
(DVD
video operation
Second page switch)
(DVD
audio operation
Second page (video CD)
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
There are operation switches on the “Top Page” and “Second Page” screens. “Top To change Page” or “Second Page” switch on the screen.
the screen, push
the
05 SIENNA_U (L/O 0409)
If “ you select a switch, it the switch cannot work.
” appears on the screen when indicates that
On the screen
Controller
271
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
—DVD player operation (DVD video/DVD audio) NOTE: The playback condition of some DVD video discs may be determined by the DVD video software producer. This DVD player plays discs as the software producer intended. Therefore, some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For detailed information about DVD vid- eo discs, see “—DVD video disc infor- mation” on page 295 in this Section. Precautions for DVD video discs When recording on a DVD video, DVD audio, video CD or audio tracks may not record in some cases while the menu is displayed. As audio will not play in this case, verify that the video tracks are play- ing and then activate playback. The title/chapter number and playback time display may not appear while playing back certain DVD video discs.
CAUTION
Conversational speech on some DVDs is recorded at a low volume to em- phasize the impact of sound effects. If you adjust the volume assuming that the conversations represent the maximum volume level available for the DVD, you may be startled by louder sound effects or when you change to a different audio source. Loud sounds may have a significant impact on the human body or pose a driving hazard. Keep in mind when you adjust the volume.
this
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
DVD player unit
To turn off the switches on the screen, push the “CURSOR” button on the control- ler once again or push the “Hide Keys” on the screen.
272
05 SIENNA_U (L/O 0409)
TURNING THE MENU SCREEN FOR THE DISC ON OR OFF DVD video— To turn on the menu screen for the disc, push the “Top Menu” or the “Menu” switch on the screen. You can also turn on the menu screen by pushing the “MENU” or “TOP MENU” switch on the controller. DVD audio— To turn on the menu screen for the disc, push the screen. You can also turn on the menu screen by pushing “TOP MENU” switch on the controller. For the operation of the menu screen, see the separate manual for the DVD disc.
“Top Menu” switch on
the
the
To turn on the selecting switch, push the “
” switch.
273
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
”, “
”, “
” or “
” switches on
To select the menu for the disc, push the the “ screen. Push the “Enter” switch to select the menu for the disc. You can also select the menu for the disc by the joystick and the “ENT” button on the controller when the control switches are not indicated on the screen. Push the “Shift Keys” on the screen, and ”, “Enter” the switches (“ and “Shift Keys” switches) will move up and down. To turn off the switch, push the “OFF” switch on the switch again, push the “ON” switch on the screen. To return to the previous screen, push the “Back” switch on the screen.
the screen. To
turn on
”, “
”, “
”, “
274
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
”, “"”, “AA” AND
” switch/button: Push this switch/button
OPERATING THE “ “""” SWITCHES/BUTTONS “ to pause the disc. “"” switch/button: Push this switch/button to cancel the pause and return to normal playing. “AA” and “""” switches/buttons: Push and hold the “AA” or “""” switch/button to fast forward or reverse. When you re- lease the switch/button, the DVD player will resume playing. DVD video only— “""” switch/button Push while pausing, the DVD video plays the slow−motion video replay or the slow−mo- tion video replay in reverse.
the “AA” or
05 SIENNA_U (L/O 0409)
SKIPPING TO THE PREDETERMINED SCREEN To skip to the predetermined screen, push the “Return” switch. The DVD player starts playing from the beginning of the predeter- mined screen. You can also display the screen by pushing the “RETURN” button on the controller. For the predetermined screen, see the separate manual for the DVD disc.
further details of
275
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
SELECTING THE TITLE/GROUP To display the searching title (DVD video) or group (DVD audio) screen, push the “Search” switch on the screen. You can also display the screen by pushing the “SEARCH” button on the controller.
DVD video
DVD audio
276
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
for
that
“+10” switches and push
DVD video— Select the title number by using the “−”, “+” and the “Enter” switch to enter the number. The player starts playing disc title number. The selected title number will appear on the screen. Push the “Back” switch to return to the menu screen. DVD audio— Enter the group number by using the “−” and “+” switches. The selected group number will appear on the screen. Push the “Enter” switch. The player starts play- ing the disc from the entered group num- ber. Push the “Back” switch to return to the previous screen.
05 SIENNA_U (L/O 0409)
SELECTING THE BONUS GROUP DVD audio only— the Enter the bonus group number on the searching group screen and push “Enter” switch. The “Enter Key Code” screen will appear. To enter the number of the the group you want group number. the wrong number, push the “Clear” switch to delete the number. Push the “Enter” switch on the screen. The player starts playing the disc from the selected bonus group number.
to play, push
If you enter
CHANGING THE STILL PICTURE DVD audio only— Push the “Still Prev.” or “Still Next” switch on the screen to forward or reverse the still pictures.
277
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
CHANGING THE SUBTITLE LANGUAGE Push the “Sub Title” switch on the screen, and then the changing subtitle language screen will appear. You can also display the screen by pushing the “SUB TITLE” button on the controller.
Each time you push the “Sub Title” switch, another language stored on the disc is selected. To turn off the subtitles, push the “Hide” switch. Push the “Back” switch to return to the previous screen. The selected subtitle language will appear on the screen.
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
278
05 SIENNA_U (L/O 0409)
(DVD
CHANGING AUDIO LANGUAGE video only) the “Audio” switch on the screen Push and language then screen will appear. You can also display the screen by pushing the “AUDIO” button on the controller.
the changing audio
DVD video
DVD audio
279
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
CHANGING ANGLE SCREEN Push the “Angle” switch on the screen, and then the changing angle screen will appear. You can also display the screen by pushing the “ANGLE” button on the controller.
turn off
language screen,
Each time you push the “Audio” switch, another language stored on the disc is selected. To the audio push the “Hide” switch. Push the “Back” switch to return to the previous screen. DVD video— The selected audio language will appear on the screen. DVD audio— The sound condition which is playing at present will appear on the screen.
280
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
CHANGING THE INITIAL SETTING Push the “Set Up” switch on the screen, and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. After the setting is done, the player plays from the beginning of the chapter or the track.
281
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
the “Angle” switch,
The angle can be selected for discs that are multi−angle compatible when the ” mark appears on the screen. Each “ time you push the angle changes. The angle number which you can select will appear on the screen. To turn off the screen, push the “Hide” switch. Push the “Back” switch to return to the previous screen.
05 SIENNA_U (L/O 0409)
the
the screen, push
There are initial setting switches on the “Setup Menu 1” and “Setup Menu 2” screens. To change “Top Page” or “Second Page” switch on the screen. After you change the initial setting, push the initial setting switch will be turned off and return to the picture previously. When the “Initial Setting” switch on “Setup Menu 2” is pushed, all menus are initial- ized.
“Enter” switch. The
the the “Select Audio
CHANGING THE AUDIO LANGUAGE Push the “Audio Lang.” switch on “Setup Menu 1” and Language” screens appears. Select the language you want to hear on the screen. To return to the “Setup Menu 1” screen, push the “Back” switch. If you cannot find a language you want to hear, push the “Others” switch. The “Enter Audio Lang. Code” screen will appear.
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
Setup Menu 1 screen
Setup Menu 2 screen
282
05 SIENNA_U (L/O 0409)
the
CHANGING THE SUBTITLE LANGUAGE To display “Select Subtitle Lang.”, push the “Subtitle Lang.” switch on the “Setup Menu 1” screen. Select the language you want to read on the screen. To return to the “Setup Menu 1” screen, push the “Back” switch. If you cannot find a language you want to read, push the “Others” switch. The “Enter Subtitle Lang. Code” screen will appear.
to read, push
the number of
To enter the code of the language you want the language code. For details about the lan- guage codes, see the language code list. If you enter a wrong number, push the “Clear” switch to delete the number. Push the “Enter” switch on the screen. If numbers which are not on the list are entered and the “Enter” switch is pushed, the “Incorrect code” screen will appear. Push the language code you want to read again. To return to the “Select Subtitle Lang.” screen, push the “Back” switch on the screen.
283
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
to hear, push
the number of
To enter the code of the language you want the language code. For details about the lan- guage codes, see the language code list. If you enter a wrong number, push the “Clear” switch to delete the number. If numbers which are not on the list are entered and the “Enter” switch is pushed, the “Incorrect Code” screen will appear. Push the language code you want to hear again. To return to the “Select Audio Language” screen, push the “Back” switch.
05 SIENNA_U (L/O 0409)
CHANGING THE DVD LANGUAGE To display the “Select DVD Language” screen, push the “DVD Language” switch on the “Setup Menu 1” screen. Select the language you want to read on the screen. To return to the “Setup Menu 1” screen, push the “Back” switch. If you cannot find a language you want to read, push the “Others” switch. The “Enter DVD Language Code” screen will appear.
284
to read, push
the number of
To enter the code of the language you want the language code. For details about the lan- guage codes, see the language code list. If you enter a wrong number, push the “Clear” switch to delete the number. Push the “Enter” switch on the screen. If numbers which are not on the list are entered and the “Enter” switch is pushed, the “Incorrect code” screen will appear. Push the language code you want to read again. To return to the “Select DVD Language” screen, push the “Back” switch on the screen.
TURNING THE ANGLE MARK ON OR OFF The angle mark can be turned on discs that are multi−angle compatible. Each switch on turns on or off alternately.
the “Angle Mark” the angle mark
time you push
the screen,
for
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
Push a parental level (1—8). The smaller the level number, the stricter the age limit. Push the “Back” switch to return to the “Setup Menu 1” screen.
Push the number for the password and the “Enter” switch. The “Select Restriction Level” screen will appear. If you enter a wrong number, push the “Clear” switch to delete the number. You cannot change the setting without in- putting the password. When you forget or change the “Clear” switch ten times to initialize the password. To return to the “Setup Menu 1” screen, push the “Back” switch.
the password, push
285
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
OF
LEVEL
VIEWER
SETTING RESTRICTIONS You can restrict the play back screen by setting the viewer restrictions. You can prevent the restriction with a password. Some discs do not supply a restriction. To set the level of viewer restriction, push the “Parental” switch on the “Setup Menu 1” screen. The “Enter Personal Code” screen will appear.
05 SIENNA_U (L/O 0409)
LANGUAGE CODE LIST
Code
1001
0514
0618
0405
0920
0519
2608
1412
1620
1922
1821
1115
0512
0101
0102
0106
0113
0118
0119
Language
Japanese
English
French
German
Italian
Spanish
Chinese
Dutch
Portuguese
Swedish
Russian
Korean
Greek
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
0125
0126
0201
0205
0207
0208
0209
0214
0215
0218
0301
0315
0319
0325
0401
0426
0515
0520
0521
0601
0609
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Esperanto
Estonian
Basque
Persian
Finnish
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
SETTING THE DISPLAY MODE Each time you push the “Display Mode” switch on the “Setup Menu 2” screen, the display mode is changed from wide mode to auto mode.
286
05 SIENNA_U (L/O 0409)
0610
0615
0625
0701
0704
0712
0714
0721
0801
0809
0818
0821
0825
0901
0905
0911
0914
0919
0923
1009
1023
Fiji
Faroese
Frisian
Irish
Scots−Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
1101
1111
1112
1113
1114
1119
1121
1125
1201
1214
1215
1220
1222
1307
1309
1311
1312
1314
1315
1318
1319
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
1320
1325
1401
1405
1415
1503
1513
1518
1601
1612
1619
1721
1813
1814
1815
1823
1901
1904
1907
1908
1909
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Quechua
Rhaeto−Romance
Kirundi
Romanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo−Croatian
Sinhalese
287
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
2019
2020
2023
2111
2118
2126
2209
2215
2315
2408
2515
2621
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
1911
1912
1913
1914
1915
1917
1918
1919
1920
1921
1923
2001
2005
2007
2008
2009
2011
2012
2014
2015
2018
288
SELECTING THE CHAPTER/TRACK ” To select the chapter/track, push the “ or “ ” side of the “TUNE/TRACK“ button on the controller until the number of the chapter/track you want to select appears on the screen.
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
USING THE CONTROL SCREEN When playing a disc, push the “DVD” but- ton on the controller. The control screen will appear on the screen. Details of the specific switches, controls and features are described below. 1. “PICTURE” switch
Push the “PICTURE” switch to turn off the control screen and return to the picture previously displayed.
2. “RPT” switch (DVD audio only)
Push the “RPT” switch while the track is playing. When the track ends, it will automatically replay. To turn off the re- peat feature, push this switch again.
3. “RAND” switch (DVD audio only)
Push the “RAND” switch. The player will play the tracks on the disc in ran- dom order. To turn off the random fea- ture, push this switch again.
4. “SCAN” switch (DVD audio only)
Push the “SCAN” switch. The player will scan all the tracks on the disc you are listening to. To stop scanning, push this switch again. If the player scanned all the tracks on the disc, it will stop scanning.
5. “
” and “
” switches
” switch Push and hold the “ to fast forward or reverse a disc. When you release the switch, the DVD player will resume playing.
” or “
289
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
DVD video
DVD audio
05 SIENNA_U (L/O 0409)
—DVD player operation (video CD/audio CD/CD text)
SELECTING THE DISC MENU NUMBER (video CD only) Push the “Sel. Number” switch and then the disc menu number search screen will appear. You can also display the screen by pushing the “SEARCH” button on the controller.
Enter the disc menu number by using the “−”, “+” and “+10” switches and push the “Enter” switch. The player starts playing the disc from the entered disc menu num- ber. The entered disc menu number will appear on the screen. Push the “Back” switch to return to the menu screen. Move up and down the switches by push- ing the “Shift Keys” on the screen.
290
”, “"”, “AA” AND
” switch: Push this switch to pause the
OPERATING THE “ “""” SWITCHES (video CD only) “ disc. “"” switch: Push this switch to cancel the pause and return to normal playing. “AA” and “""” switches: Push this switch to fast forward or reverse. If you want the current track, release the switch. Video CD only— Push the “""” switch/button while paus- ing, the DVD video plays the slow−motion video replay.
the beginning of
to return to
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
TURNING ON THE DISC MENU (video CD only) Push the “Return” switch to turn on the menu screen for the disc. You can also turn on the menu screen by pushing the “RETURN” button on the controller. For the operation of the menu screen, see the manual for the video CD.
CHANGING MENU PAGE OR TRACK (video CD only) Push the “D. Menu Next” or “D. Menu Prev.” switch while the disc menu is dis- played. The next or previous page will appear on the screen. Push the “D. Menu Next” or “D. Menu Prev.” switch while the player is playing video. The next or previous track will be searched and played.
MULTIPLEX
CHANGING TRANSMISSION (video CD only) Push the “Main/Sub” switch to change a multiplex transmission. The mode changes from Main/Sub to Main to Sub and back to Main/Sub by pushing the “Main/Sub” switch.
291
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
Video CD
CD Text
CHANGING THE INITIAL SETTING (video CD only) Push the “Set Up” switch on the screen and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. (See “CHANGING THE INITIAL SETTING” on page 281 in this Section for details.) After the setting is done, the player plays from the beginning of the chapter or the track.
292
Audio CD
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
—Screen adjustment
USING THE CONTROL SCREEN When playing a disc, push the “DVD” but- ton on the controller. The control screen will appear on the screen. CD text only— The disc title and track title will appear on the screen when pushing the “DVD” but- ton. Details of the specific switches, controls and features are described below. 1. “PICTURE” switch (video CD only)
Push the “PICTURE” switch to turn off the control screen and return to the picture previously displayed.
2. “RPT” switch (audio CD and CD text) Push the “RPT” switch while the track is playing. When the track ends, it will automatically replay. To turn off the re- peat feature, push this switch again.
3. “RAND” switch (audio CD and CD text) Push the “RAND” switch. The player will play the tracks on the disc in ran- dom order. To turn off the random fea- ture, push this switch again.
4. “SCAN” switch (audio CD and CD text) Push the “SCAN” switch. The player will scan all the tracks on the disc. To stop scanning, push this switch again. When the player has scanned all the tracks on the disc, it will stop scan- ning.
5. “
” and “
” switches
” or “
Push the “ ” switch to fast forward or reverse the disc. When you push the switch again, the DVD player will resume playing.
You can adjust the color, contrast, tone and brightness of the screen. Push the “DISPLAY” button on the control- ler and then the “Display” screen will ap- pear. The screen may turn purple to deflect the sunlight. This is not a malfunction.
293
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
After adjusting the screen, push the “OK” switch to return to the previous screen.
—Selecting the video mode
Each time you push the “+” or “−” switch, you can adjust the color, contrast, tone and brightness of the screen.
+ or “GREEN”
Strengthens the green color Strengthens the contrast
− or “RED”
Strengthens the red color Weakens the contrast
Strengthens the tone
Weakens the tone
COLOR
CONTRAST
TONE
BRIGHTNESS Brightens
Darkens
294
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
The audio machine connected to the input terminal adapter can be played the video mode. To select the “VIDEO” button on the controller. You can also select the video mode on the mode selection screen mentioned above.
the video mode, push
in
05 SIENNA_U (L/O 0409)
—DVD video disc information DVD PLAYER AND DVD VIDEO DISCS This DVD player conforms to NTSC col- or TV formats. DVD video discs con- forming to other formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating where you can use. If the DVD video disc is not labeled “ALL” or “1”, you cannot use it in this DVD player. If you attempt to play an inappropriate DVD video disc in this play- er, “REGION CODE ERROR” appears on the screen. Even if the DVD video disc does not have a region code, in some cases you cannot use it.
Marks shown on DVD video discs:
Indicates NTSC format of color TV.
Indicates the number of audio tracks.
Indicates the number of language subtitles.
Indicates the number of angles.
Indicates the screen
to be selected.
Wide screen: 16:9
Standard: 4:3
Indicates regions in which this video disc can be played. ALL: all countries Number: region code
295
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
DVD VIDEO DISC GLOSSARY
DVD video discs: Digital Versatile Disc
that holds video. DVD video discs have
adopted “MPEG2”, one of the world stan-
dards of digital compression technologies.
The picture data is compressed by 1/40
on average and stored. Variable rate en-
coded technology in which the volume of
data assigned to the picture is changed
depending on the picture format has also
been adopted. Audio data is stored using
PCM and Dolby digital, which enables
higher quality of sound. Furthermore, mul-
ti−angle and multi−language features will
also help you enjoy the more advanced
technology of DVD video.
Viewer restrictions: This
limits
what can be viewed in conformity with the
level of restrictions of the country. The
level of restrictions varies depending on
the DVD video disc. Some DVD video
discs cannot be played at all, or violent
scenes are skipped or replaced with other
scenes.
Level 1: DVD video discs for children can
be played.
Level 2—7: DVD video discs for children
and G−rated movies can be played.
feature
Level 8: All types of DVD video discs can be played. Multi−angle feature: You can enjoy the same scene at different angles. Multi−language feature: You can select the language of the subtitles and audio. Region codes: Region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you can- not play the disc on the DVD player. For region codes, see page 295. Audio: This DVD player can play liner PCM, Dolby digital, dts and MPEG audio format DVD. Other decoded type cannot be played. Title and chapter: Video and audio pro- grams stored on DVD video discs are di- vided in parts by title and chapter. Title: The largest unit of the video and audio programs stored on DVD video discs. Usually, one piece of a movie, one album, or one audio program is assigned as a title. Chapter: A unit smaller than a title. A title comprises plural chapters.
296
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double−D symbol are trademarks of Dolby Laboratories. Confidential unpub- lished works. E1992−1997 Dolby Laboratories. All rights reserved. incorporates copyright This product protection technology that is protected by method claims of certain U.S. pat- ents and other intellectual property rights owned by Macrovision Corpora- tion and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Cor- poration, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. “dts” is a trademark of Digital Theater Systems, Inc.
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
—Power outlet
—Input terminal adapter The rear entertainment system plays vid- eos and sound when your audio system is connected to the input terminal adapter. For details, refer the manufacturer’s instructions.
to
To use the input terminal adapter, open the cover. The input terminal adapter is composed of 3 input terminal adapters. Yellow: Image input adapter Red: Audio input adapter White: Audio input adapter
NOTICE
Close the input terminal adapter cover when the input terminal adapter is not in use. Inserting a foreign object oth- er than the appropriate plug that fits the adapter may cause electrical fail- ure or short circuit.
This power outlet is designed for use as a power supply for the audio device con- nected to the input terminal adapter. The key must be in the “ON” position for the power outlet to be used. The maximum capacity for this power out- let is 115 VAC/100W. If you attempt to use an appliance that requires more than 115 VAC or 100W, the protection circuit will activate and cut the power supply. The power supply will restart automatically when you use an appliance that operates within the 115 VAC/100W limits.
297
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
NOTICE
z To prevent the battery from being discharged, do not use the power outlet longer than necessary when the engine is not running.
z Close the power outlet lid when the power outlet is not in use. Inserting a foreign object other than the ap- propriate plug that fits the outlet may cause electrical failure or short circuit.
The power outlet is not designed for
the following electric appliances even if
their power consumption is under 115
VAC/100W. These appliances may not
operate properly.
D Appliances with high initial peak watt-
age: cathode−ray tube type televisions,
compressor−driven refrigerators, electric
pumps, electric tools, etc.
D Measuring devices which process pre- cise data: medical equipment, measur- ing instruments, etc.
To use the power outlet, push the main switch on the instrument panel. An indicator light will illuminate to indicate that the power outlet is ready for use. Push the main switch once again to turn the power outlet off. When the power out- let is not in use, make sure that the main switch is turned off.
298
D Other appliances requiring an extremely stable power supply: microcomputer− controlled electric blankets, touch sen- sor lamps, etc.
Certain electrical appliances may cause radio noise.
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
—Headphone input jacks
CAUTION
Adjust the volume when you connect the headphones jack. Loud sounds may have a significant impact on the human body.
the
to
You can enjoy the rear seat entertain- ment system with commercial head- phones. To use the headphones, connect them to the jack. The key must be in the “ACC” or “ON” position.
To adjust the volume of the headphones, turn the dial. Left side dial: Turn it upward to increase the volume, turn it downward to decrease the volume. Right side dial: Turn it downward to in- crease the volume, turn it upward to de- crease the volume. The maximum volume depends on type of headphones. The recommended headphone impedance is from 16 Ω to 32 Ω. Please contact your Toyota dealer for fur- ther details.
the
299
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
Audio/video system operating hints
NOTICE
To ensure correct audio/video system operation: z Be careful not to spill beverages
over the system.
z Do not put anything other than a cassette tape or Compact Disc into the slot.
z Do not put anything other than a DVD video, DVD audio, video CD, dts−CD or audio CD into the DVD player.
z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the sys- tem which you are to. However, this does not indicate a malfunction.
listening
RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio—it is just the normal result of conditions outside the vehicle.
300
reception
In addition,
For example, nearby buildings and terrain
can
interfere with FM reception. Power
lines or telephone wires can interfere with
AM signals. And of course, radio signals
have a limited range. The farther you are
from a station, the weaker its signal will
be.
conditions
change constantly as your vehicle moves.
Here are some common reception prob-
lems that probably do not indicate a prob-
lem with your radio:
FM
Fading and drifting stations—Generally, the
effective range of FM is about 40 km (25
miles). Once outside this range, you may
notice fading and drifting, which increase
with the distance from the radio transmit-
ter. They are often accompanied by distor-
tion.
Multi−path—FM
reflective,
making it possible for two signals to reach
your antenna at the same time.
If this
happens, the signals will cancel each oth-
er out, causing a momentary
flutter or
loss of reception.
signals are
listening to
Static and fluttering—These occur when signals are blocked by buildings, trees, or other large objects. Increasing the bass level may reduce static and fluttering. the FM signal you Station swapping—If are interrupted or weak- is ened, and there is another strong station nearby on the FM band, your radio may tune in the second station until the origi- nal signal can be picked up again. AM Fading—AM broadcasts are reflected by the upper atmosphere—especially at night. These reflected signals can interfere with those received directly from the radio sta- tion, causing the radio station to sound alternately strong and weak. Station interference—When a reflected sig- nal and a signal received directly from a radio station are very nearly the same frequency, interfere with each other, making it difficult to hear the broad- cast. Static—AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electri- cal motors. This results in static.
they can
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
CARING FOR YOUR CASSETTE PLAYER AND TAPES For the best performance for your cas- sette player and tapes: Clean the tape head and other parts regu- larly. D A dirty
tape head or tape path can decrease sound quality and tangle your cassette to clean them is by using a cleaning tape. (A wet type is recommended.)
tapes. The easiest way
Use high−quality cassettes. D Low−quality cassette tapes can cause many problems, including poor sound, inconsistent and constant auto−reversing. They can also get stuck or tangled in the cassette player.
playing
speed,
D Do not use a cassette if it has been damaged or tangled or if its label is peeling off.
D Do not leave a cassette in the player if you are not listening to it, especially if it is hot outside.
D Store cassettes in their cases and out
of direct sunlight.
05 SIENNA_U (L/O 0409)
CAUTION
Compact disc players and DVD play- ers use an invisible laser beam which could cause hazardous radiation ex- posure if directed outside the unit. Be sure to operate the players correctly.
D Avoid using cassettes with a total play-
ing time longer than 100 minutes (50
minutes per side). The tape used in
these cassettes is thin and could get
stuck or tangled in the cassette player.
CARING FOR YOUR COMPACT DISC
PLAYER, DVD PLAYER AND DISCS
D Extremely high temperatures can keep
your compact disc player and DVD
player from working. On hot days, use
the air conditioning to cool the vehicle
interior before you use the players.
D Bumpy roads or other vibrations may make your compact disc player and DVD player skip.
D If moisture gets into your compact disc the players player and DVD player, may not play even though they appear to be working. Remove the disc from the player and wait until it dries.
301
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
Audio CDs
DVD video discs
DVD audio discs
Video CDs
DVD player D Use only discs marked as shown above. The following products may not be playable on your DVD player. SACD Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM DVD−R DVD+R DVD+RW DVD−RW DVD−ROM DVD−RAM
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
Compact disc player D Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. SACD dts−CD Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM
302
05 SIENNA_U (L/O 0409)
NOTICE
Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be the disc.
impossible
to eject
Special shaped discs
Low quality discs
Transparent/translucent discs
Labeled discs
303
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
To clean a disc: Wipe it with a soft, lint− free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti−static device.
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
Correct
Wrong
D Handle
the discs carefully, especially when you are them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side.
inserting
D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a chapter or track. (To see a pin hole, hold the disc up to the light.)
D Remove discs from the compact disc player when you are not playing them. Store them in their plastic cases away from moisture, heat, and direct sun- light.
304
05 SIENNA_U (L/O 0409)
SECTION 1− 9
OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Front manual air conditioning system
Controls Air flow selector settings Operating tips
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
306
309
309
Front automatic air conditioning system
Controls Air flow selector settings Operating tips
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side vents Rear manual air conditioning system
312
315
315
317
Controls Air flow selector settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
318
319
Rear automatic air conditioning system
Controls Air flow selector settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air conditioning filter
320
322
322
305
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
Front manual air conditioning system— —Controls
05 SIENNA_U (L/O 0409)
1. “A/C” button 2. Air intake selector 3. Air flow selector 4. Temperature selector 5. Fan speed selector
306
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
Fan speed selector Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. Temperature selector Turn the knob to adjust the temperature— to the right to warm, to the left to cool.
This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.
5. Windshield—Air flows mainly from the
Air flow selector Turn the knob to select the vents used for air flow. 1. Panel—Air panel vents.
instrument
flows
from
the
2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor
vents.
the
4. Floor/Windshield—Air
flows mainly floor vents and windshield
from vents. the Turning floor/windshield position the defogging function with the purpose of clearing the front view.
to turns on
flow selector
the air
to
flow selector
windshield vents. the Turning the air windshield position turns on the defog- ging function with the purpose of clear- ing the front view. This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.
For details about air flow selector settings, see “—Air flow selector settings” on page 309.
307
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)
“A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again.
Air intake selector Press the button to select the air source. 1. Recirculate—Recirculates the air inside
the vehicle.
2. Fresh—Draws outside air into the sys-
tem.
To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system.
308
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
—Air flow selector settings
05 SIENNA_U (L/O 0409)
—Operating tips D To cool off your Toyota after
it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).
D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.
D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.
for a minute
D On cold days, set the fan speed to high the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.
to help clear
D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except “OFF”.
309
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.
Heating For best results, set controls to:
Fan speed—Any setting except “OFF” Temperature—Towards WARM
(red zone)
Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF
for a
few minutes. To keep
D For quick heating, select recirculated air