Download PDF Manual


STEP 2


Select the portable player to be used by either of the following methods, and select “Confirm” using a voice command or


a. Press the talk switch and say the name of the desired por-


table player.


b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.


335


3-3. Using the Bluetooth® audio system


STEP 3


Press the talk switch and say “From car” or “From audio”, and


select “Confirm” using a voice command or


Vehicles with smart key system: If “From car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode. Vehicles without smart key system: If “From car” is selected, the por- table player will be automatically connected whenever the engine switch is in either the “ACC” or “ON” position.


Changing the registered name of a portable player


STEP 1


Select “Change Name” using a voice command or


STEP 2


Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a


voice command or


a. Press the talk switch and say the name of the desired por-


table player.


b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.


STEP 3


Press the talk switch or select “Record Name” using


and say the new name.


STEP 4


Select “Confirm” using a voice command or


336


3-3. Using the Bluetooth® audio system


Listing the registered portable players


Select “List Audio Players” using a voice command or


. The


list of registered portable players will be read aloud. When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player”


Changing the passkey


STEP 1


Select “Set Passkey” using a voice command or


STEP 2


Press the talk switch, say a 4 to 8-digit number, and select


“Confirm” using a voice command or


STEP 3


When the entire number to be registered as a passkey has


been input, press


again.


337


3-3. Using the Bluetooth® audio system


Deleting a registered portable player


STEP 1


Select “Delete Audio Player” using a voice command or


STEP 2


Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or


a. Press the talk switch and say the name of the desired por-


table player.


b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.


If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.


STEP 3


Select “Confirm” using a voice command or


■The number of portable players that can be registered Up to 2 portable players can be registered in the system.


338


3-3. Using the Bluetooth® audio system Bluetooth® audio system setup


■ System setup items and operation procedures →P. 362


339


3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗


This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. ■ Hands-free system quick guide STEP 1


Setting a cellular phone. (→P. 344) Adding an entry to the phonebook (Up to 20 names can be stored). (→P. 366) Dialing by inputting a name. (→P. 354)


STEP 2


STEP 3


340


∗: If equipped


3-4. Using the hands-free phone system (for cellular phone)


Title


Using the hands-free phone system ■ Operating the system using a voice


■ Using the hands-free phone system for


■ Menu list of the hands-free phone


command


the first time


system


Making a phone call ■ Dialing by inputting a number ■ Dialing by inputting a name ■ Speed dialing ■ When receiving a phone call ■ Transferring a phone call ■ Using the call history Setting a cellular phone ■ Registering a cellular phone ■ Selecting a cellular phone to be used ■ Changing a registered name ■ Listing the registered cellular phones ■ Deleting a cellular phone ■ Changing the passkey ■ Turning the hands-free phone


automatic connection on/off


Security and system setup ■ Setting or changing the PIN ■ Locking or unlocking the phone book ■ Setting voice guidance volume ■ Initialization Using the phone book ■ Adding a new phone number ■ Setting speed dials ■ Changing a registered name ■ Deleting registered data ■ Deleting speed dials ■ Listing the registered data


Page


P. 344


P. 353


P. 357


P. 362


P. 366


341


3-4. Using the hands-free phone system (for cellular phone)


■Conditions under which the system will not operate


●If using a cellular phone that does not support Bluetooth® ●If the cellular phone is switched off ●If you are outside service range ●If the cellular phone is not connected ●If the cellular phone's battery is low ●If the cellular phone is behind the seat or in the glove box or console box ●If metal is covering or touching the cellular phone


■When transferring ownership of the vehicle


Be sure to initialize the system to prevent personal data from being improp- erly accessed.


■Required profiles for the cellular phone


●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1


■About Bluetooth®


Bluetooth is a registered trademark of Bluetooth SIG. Inc.


■Certification for the hands-free phone system


216J-C5ZZZ035


FCC ID: ACJ932C5ZZZ035
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper- ation.


342


3-4. Using the hands-free phone system (for cellular phone)


CAUTION


■FCC WARNING


Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.


■Caution while driving


Do not use a cellular phone, or connect the Bluetooth® phone.


NOTICE


■To prevent damage to a cellular phone


Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.


343


3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system∗


■ Audio unit


Display A message, name, phone number, etc. is displayed.


Lower-case characters and special characters, such as an umlaut, cannot be dis- played.


Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition and reception level


If “BT” is not displayed, the hands-free phone system cannot be used.


344


∗: If equipped


3-4. Using the hands-free phone system (for cellular phone)


■ Steering wheel telephone switches


■ Microphone


Volume The voice guidance volume cannot be adjusted by using this switch. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command system on (press)/turns the voice command system off (press and hold)


345


3-4. Using the hands-free phone system (for cellular phone)


Operating the system using a voice command


By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone sys-


tem without the need to check the display or operate


■ Operation procedure when using a voice command


Press the talk switch and follow voice guidance instructions.


■ Auxiliary commands when using a voice command


The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the hands-free phone system “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function


346


3-4. Using the hands-free phone system (for cellular phone)


Using the hands-free phone system for the first time


Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1
The introductory guidance and phone name registration instructions are heard.


Press the off-hook switch or the talk switch.


STEP 2


Select “Pair Phone” using a voice command or


STEP 3


Register a phone name by either of the following methods.


a. Select “Record Name” using


, and say a name to be


registered.


b. Press the talk switch and say a name to be registered.


Voice guidance instruction to confirm the input is heard.


STEP 4


Select “Confirm” using a voice command or


347


3-4. Using the hands-free phone system (for cellular phone)


Registration to the hands-free phone system only


STEP 5


Select “Phone Only” using a voice command or


Registration to the hands-free phone system and Bluetooth® audio system at the same time


STEP 5


Select “Int. Audio (Internal audio)” using a voice command or


STEP 6


Select “Confirm” using a voice command or


A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 7


Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.


Guidance for registration completion is heard.


348


3-4. Using the hands-free phone system (for cellular phone)


Menu list of the hands-free phone system


■ Normal operation


First menu


Second menu


Third menu


Operation detail


CallBack (Call back)


Redial


Dial by Number Dial by Name (Dial by name)


Phonebook


Add Entry Change Name Delete Entry Delete Speed Dial List Names Speed Dial (Set speed dial)


Dialing a number stored in the incoming call history


Dialing a number stored in the outgoing call history


Dialing by inputting a number


Dialing by inputting a name registered in the phone book


Adding a new number Changing a name in the phone book Deleting the phone book data


Deleting a registered speed dial


Listing the phone book data


Registering a speed dial


349


3-4. Using the hands-free phone system (for cellular phone)


First menu


Second menu


Third menu


Operation detail


Set PIN Phonebook Lock (Phone book lock) Phonebook Unlock (Phone book unlock)


Pair Phone


Change Phone Name (Change name)


Delete Phone


List Phones


Select Phone


Set Passkey Handsfree Power Guidance Vol- ume


Device Name


Reset Setting


Setting a PIN code


Locking the phone book


Unlocking the phone book


Registering the cellular phone to be used


Changing the registered name of a cellular phone


Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey Turning the Hands-free power on/off Setting voice guidance vol- ume Displaying a device’s infor- mation Initialization


Security


Setup (Setup)


Phone Setup


System Setup


350


3-4. Using the hands-free phone system (for cellular phone)


■ Using a short cut key


First menu


Second menu


Operation detail


Dial “XXX (name)”


Dial “XXX (number)” Phone book add entry


Phone book change name


Phone book delete entry Phone book set speed dial Phone book delete speed dial Phone book List names


Dialing a number registered in the phone book Dialing the input numbers


Adding a new number


Changing the name of a phone number in the phone book


Deleting phone book data


Registering a speed dial


Deleting a speed dial


Listing the phone book data


351


3-4. Using the hands-free phone system (for cellular phone)


■Automatic volume adjustment


When vehicle speed reaches 50 mph (80 km/h) or more, the volume auto- matically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.


■When using a voice command


For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say the command correctly and clearly.


■Situations that the system may not recognize your voice


●When driving on a rough road ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise


■Operations that cannot be performed while driving


●Operating the system with


●Registering a cellular phone to the system


■Changing the passkey


→P. 360


352


3-4. Using the hands-free phone system (for cellular phone) Making a phone call


■ Making a phone call


● Dialing by inputting a number


“Dial by Number”


● Dialing by inputting a name


“Dial by Name (Dial by name)”


● Speed dialing ● Dialing a number stored in the outgoing history


“Redial”


● Dialing a number stored in the incoming history


“CallBack (Callback)” ■ Receiving a phone call ● Answering the phone ● Refusing the call


■ Transferring a phone call ■ Using the call history


● Dialing ● Storing data in the phone book ● Deleting


Dialing by inputting a number


STEP 1


STEP 2


Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number.


353


3-4. Using the hands-free phone system (for cellular phone)


STEP 3


Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.


c. Select “Dial” using


Dialing by inputting a name


STEP 1


STEP 2


Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk


switch while the desired name is being read aloud.


STEP 3


Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.


c. Select “Dial” using


Speed dialing


STEP 1


STEP 2


STEP 3


Press the off-hook switch. Press the preset button to which the desired number is regis- tered. Press the off-hook switch.


354


3-4. Using the hands-free phone system (for cellular phone)


When receiving a phone call


■ Answering a phone call Press the off-hook switch.


■ Refusing a phone call


Press the on-hook switch.


Transferring a phone call


A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:


a. Operate the cellular phone.


Refer to the manual that comes with the cellular phone for the oper- ation of the phone.


b. Press the off-hook switch*1. c. Press the talk switch and say “Call transfer”*2. *1: This operation can be performed only when transferring a call


from the cellular phone to the system during a call.


*2: While the vehicle is in motion, a call cannot be transferred from the system to the cellular phone. Also, this operation is invalid while dialing or receiving a call.


Using the call history


Follow the procedure below to use a number stored in the call history: Press the talk switch and say “Redial” (when using a number STEP 1
stored in the outgoing call history) or “Callback” (when using a number stored in the incoming call history).


355


3-4. Using the hands-free phone system (for cellular phone)


STEP 2


Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-


played.


b. Select the desired number using


The following operations can be performed:


Dialing: Press the off-hook switch or select “Dial” using a voice


command or


Storing the number in the phone book: Select “Store” using a voice


command or


Deleting: Select “Delete” using a voice command or


■Call history


Up to 5 numbers can be stored in each of the outgoing and incoming call his- tory memories.


■When talking on the phone


●Do not talk at the same time as the other party. ●Keep the volume of the incoming voice down. Otherwise, voice echo will


increase.


356


3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone


Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a


voice command or


● Registering a cellular phone


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Pair Phone”


● Selecting the cellular phone to be used


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Select Phone”


● Changing a registered name


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Change Phone Name (Change name)”


● Listing the registered cellular phones


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “List Phones”


● Deleting a cellular phone


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Delete Phone”


● Changing the passkey


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Set Passkey” ● Turning the hands-free phone automatic connection on/off


1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Handsfree Power”


Registering a cellular phone


Select “Pair Phone” using a voice command or


, and perform


the procedure for registering a cellular phone. (→P. 347)


357


3-4. Using the hands-free phone system (for cellular phone)


Selecting a cellular phone to be used


STEP 1


Select “Select Phone” using a voice command or


Pattern A


STEP 2


Select a cellular phone to be used by either of the following methods, and select “Confirm” using a voice command or


a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.


Pattern B


STEP 2


Select a cellular phone to be used using


Changing a registered name


STEP 1


Select “Change Phone Name (Change name)” using a voice


command or


STEP 2


Select the name of the cellular phone to be changed by either of the following methods: a. Press the talk switch and say the desired phone name, and


select “Confirm” using a voice command or


b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.


c. Select the desired phone name using


358


3-4. Using the hands-free phone system (for cellular phone)


STEP 3


Press the talk switch or select “Record Name” using


and say a new name.


STEP 4


Select “Confirm” using a voice command or


Listing the registered cellular phones


Selecting “List Phones” using a voice command or


causes the


list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete Phone”


359


3-4. Using the hands-free phone system (for cellular phone)


Deleting a cellular phone


STEP 1


Select “Delete Phone” using a voice command or


STEP 2


Select a cellular phone to be deleted by either of the following methods and select “Confirm” using a voice command or


a. Press the talk switch and say the name of the desired cellu-


lar phone.


b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.


Changing the passkey


STEP 1


Select “Set Passkey” using a voice command or


STEP 2


Press the talk switch, say a 4 to 8-digit number, and select


“Confirm” using a voice command or


The number should be input 1 digit at a time. When the entire number to be registered as a passkey has


STEP 3


been input, press


again.


360


3-4. Using the hands-free phone system (for cellular phone)


Turning the hands-free phone automatic connection on/off


■ Turning off the automatic connection


STEP 1


Select “Handsfree Power” using a voice command or


STEP 2


Select “Turn off” using a voice command or


■ Turning on the automatic connection


STEP 1


Select “Handsfree Power” using a voice command or


STEP 2


Select “Turn on” using a voice command or


■The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.


361


3-4. Using the hands-free phone system (for cellular phone) Security and system setup


To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure


● Setting or changing the PIN (Personal Identification Number)


1. “Setup (Setup)” → 2. “Security” → 3. “Set PIN”


● Locking the phone book


1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Lock (Phone book lock)”


● Unlocking the phone book


1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Unlock (Phone book unlock)”


■ System setup items and operation procedure


● Setting voice guidance volume


1. “Setup (Setup)” → 2. “System Setup” → 3. “Guidance Vol- ume”


● Initialization


1. “Setup (Setup)” → 2. “System Setup” → 3. “Reset Settings”


can only be used for system setup operation.


Setting or changing the PIN


■ Setting a PIN


STEP 1


Select “Set PIN” using a voice command or


STEP 2


Enter a PIN using a voice command or


When using


, input the code 1 digit at a time.


362


3-4. Using the hands-free phone system (for cellular phone)


■ Changing the PIN


STEP 1


Select “Set PIN” using a voice command or


STEP 2


Enter the registered PIN using a voice command or


STEP 3


Enter a new PIN using a voice command or


When using


, input the code 1 digit at a time.


Locking or unlocking the phone book


STEP 1


Select “Phonebook Lock (Phone book lock)” or “Phonebook Unlock (Phone book unlock)” using a voice command or


STEP 2


Input the PIN by either of the following methods and select


“Confirm” using a voice command or


a. Press the talk switch and say the registered PIN.


b. Input a new PIN using


363


3-4. Using the hands-free phone system (for cellular phone)


Setting voice guidance volume


STEP 1


Select “Guidance Volume” using


STEP 2


Change the voice guidance volume.


To decrease the volume: Turn


counterclockwise.


To increase the volume: Turn


clockwise.


Initialization


STEP 1


Select “Reset Settings” and then “Confirm” using


STEP 2


Select “Confirm” using


364


3-4. Using the hands-free phone system (for cellular phone)


■Initialization


●The following data in the system can be initialized:


• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code


●Once the initialization has been completed, the data cannot be restored


to its original state.


■When the phone book is locked


The following functions cannot be used: ●Dialing by inputting a name ●Speed dialing ●Dialing a number stored in the call history ●Using the phone book


365


3-4. Using the hands-free phone system (for cellular phone) Using the phone book


To enter the menu of each setting, follow the steps below:


● Adding a new phone number


1. “Phonebook” → 2. “Add Entry”


● Setting speed dial


1. “Phonebook” → 2. “Speed Dial (Set speed dial)”


● Changing a registered name


1. “Phonebook” → 2. “Change Name”


● Deleting registered data


1. “Phonebook” → 2. “Delete Entry”


● Deleting speed dial


1. “Phonebook” → 2. “Delete Speed Dial”


● Listing the registered data


1. “Phonebook” → 2. “List Names”


Adding a new phone number


The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone


● Inputting a phone number using


● Selecting a phone number from the outgoing or incoming call his-


tory


■ Adding procedure


STEP 1


Select “Add Entry” using a voice command or


366


3-4. Using the hands-free phone system (for cellular phone)


STEP 2


Use one of the following methods to input a telephone num- ber:


Inputting a telephone number using a voice command


STEP2-1 Select “By Voice (By voice)” using a voice command


or


STEP2-2 Press the talk switch, say the desired number, and


select “Confirm” using a voice command.


Transferring data from the cellular phone


STEP2-1 Select “By Phone” and then “Confirm” using a voice


command or


STEP2-2 Transfer the data from the cellular phone.


Refer to the manual that comes with the cellular phone for the details of transferring data.


STEP2-3 Select the data to be registered by either of the fol-


lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” using a voice command.


b. Select the desired data using


367


3-4. Using the hands-free phone system (for cellular phone)


Inputting a phone number using


STEP2-1 Select “Manual Input” using


STEP2-2 Input a phone number using


, and press


once again.


Input the phone number 1 digit at a time.


Selecting a phone number from outgoing or incoming call history


STEP2-1 Select “Call History” using a voice command or


STEP2-2 Select “Outgoing Call History (Outgoing)” or “Incom- ing Call History (Incoming)” using a voice command


or


STEP2-3 Select the data to be registered by either of the fol-


lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” using a voice command.


b. Select the desired data using


368


3-4. Using the hands-free phone system (for cellular phone)


STEP 3


Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or


a. Press the talk switch and say the desired name.


b. Select “Record Name” using


, and say the desired


name.


STEP 4


Select “Confirm” using a voice command or


STEP 3


In firm” registers the newly added phone number as a speed dial.


, selecting “Speed Dial (Set speed dial)” instead of “Con-


Setting speed dials


STEP 1


Select “Speed Dial (Set speed dial)” using a voice command


or


STEP 2


Select data to be registered as a speed dial by either of the following methods: a. Press the talk switch, say the desired number, and select


“Confirm” using a voice command or


b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,


and select “Confirm” using a voice command or


c. Select the desired data using


369


3-4. Using the hands-free phone system (for cellular phone)


STEP 3


Select a desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” using


a voice command or


b. Press and hold the desired preset button.


Changing a registered name


STEP 1


Select “Change Name” using a voice command or


STEP 2


Select a name to be changed by either of the following meth- ods: a. Press the talk switch, say the desired name, and select


“Confirm” using a voice command or


b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,


and select “Confirm” using a voice command or


c. Select the desired name using


STEP 3


Select “Record Name” with


or the talk switch.


STEP 4


Say a new name, and select “Confirm” using a voice com-


mand or


370


3-4. Using the hands-free phone system (for cellular phone)


Deleting registered data


STEP 1


Select “Delete Entry” using a voice command or


STEP 2


Select the data to be deleted by either of the following meth-


ods, and select “Confirm” using a voice command or


a. Press the talk switch, and say the name of the desired


phone number to be deleted.


b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.


Deleting speed dials


STEP 1


Select “Delete Speed Dial” using a voice command or


STEP 2


Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” using a voice command or


371


3-4. Using the hands-free phone system (for cellular phone)


Listing the registered data


Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will become available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Speed Dial (Set speed dial)”


■Limitation of number of digits


A phone number that exceeds 24 digits cannot be registered.


372


3-5. Using the interior lights Interior lights list


Your Toyota is equipped with an illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration automatically turn on/off accord- ing to the presence of the electronic key (vehicles with smart key system), whether the doors are locked/unlocked, whether the doors or glass hatch (if equipped) are opened/closed, the “ENGINE START STOP” switch mode and engine switch position.


Outer foot lights (vehicles with smart key system) Personal/interior lights (→P. 374) Engine switch light (vehicles without smart key system) Front door courtesy light Personal/interior light or interior light (→P. 374, 375) Interior light (→P. 375)


373


3-5. Using the interior lights


Personal/interior light main switch and personal/interior lights


Personal/interior light main switch


“OFF” The personal/interior lights and interior light can be individually turned on or off. Door position The personal/interior lights and interior light come on when a door or the glass hatch (if equipped) is opened. They turn off when the doors and glass hatch are closed. On The personal/interior lights and interior light cannot be individually turned off.


Personal/interior lights


Front


On/off


The illuminated entry system is activated even is turned off when the personal/inte- rior light main switch is in door position.


light


the


if


374


3-5. Using the interior lights


Personal/interior lights and interior light


Center (if equipped)


On/off


The illuminated entry system is activated even is turned off when the personal/inte- rior light main switch is in door position.


light


the


if


Interior light


Center (if equipped)


Rear


On Off The illuminated entry system is activated even is turned off when the personal/inte- rior light main switch is in door position.


light


the


if


■To prevent battery discharge


If the lights remain on when the door is not fully closed and the personal/inte- rior light main switch is in the door position, the lights will go off automatically after 20 minutes.


■Customization that can be configured at Toyota dealer


Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 582)


375


3-6. Using the storage features List of storage features


Auxiliary boxes Overhead console Glove box Bottle holders Cup holders Side table Console box


376


3-6. Using the storage features


Glove box


CAUTION


■Items that should not be left in the storage spaces


Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●Glasses may be deformed by heat or cracked if they come into contact


with other stored items.


●Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.


Glove box


Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) the master key Lock with (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Open (pull lever)


■Power back door main switch (vehicles with power back door)


The power back door main switch is located in the glove box. (→P. 59)


CAUTION


■Caution while driving


Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.


377


3-6. Using the storage features


Console box


Upper


Console box


Pull up the knob to release the lock. Lift the lid.


Lower


Push down the lever.


CAUTION


■Caution while driving


Keep the console box closed. Injuries may result in the event of an accident or sudden braking.


378


3-6. Using the storage features


Overhead console


Overhead console


The overhead console is useful for temporarily storing sunglasses and similar small items.


Press in the lid.


CAUTION


■Caution while driving


Do not leave the overhead console open while driving. Items stored in it may fall out and cause injury.


■Size of stored items


Do not put large items in the overhead console. The overhead console may not be able to be shut from the conversation mir- ror position.


■Maximum storage weight


Do not place any object heavier than 0.4 lb. (200 g) in it. The console may be opened and cause injury.


379


3-6. Using the storage features


Cup holders


Front (type A)


Cup holders


Front (type B)


Lift the lid.


Console box


Pull out the cup holder.


380


Side table


Rear


3-6. Using the storage features


Cup holders


Install the side table before using the cup holder. (→P. 387) Removing the adapters changes the size. (→P. 382)


Removing the adapters changes the size. (→P. 382)


Loading...
x