202
Installing clip
C orolla (U)
—Parking, front side marker and front turn signal lights
Use a Phillips- head screwdriver.
203
4. Release
the bulb retaining spring and remove the bulb. Install a new bulb and the bulb retaining spring.
To install a bulb, align the tabs of the bulb with the mounting hole.
the cutouts of
5. Install
the rubber cover with
the ”TOP” mark upward, and snuggle on the boss. Insert the connector.
Make sure the rubber cover fits snugly on the connector and the headlight body. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
C orolla (U)
—Rear side maker, rear turn signal, and stop and tail lights
204
Removing and installing clips (type A): Use a flat- bladed screwdriver or equivalent.
C orolla (U)
Removing clips (type B): Use a Phillips- head screwdriver.
a: Stop and tail light b: Rear turn signal light c: Rear side marker light
Installing clips (type B)
205
C orolla (U)
—License plate lights (left side)
—Back- up lights
206
C orolla (U)
—License plate lights (right side)
207
C orolla (U)
—High mounted stoplight
208