2015 Toyota 4runner Owners Manual

danger.

●Do not hang coat hangers or other hard objects on the coat hooks. All of these items could become projectiles and may cause death or serious injury, should the SRS curtain shield airbags deploy.

●If a vinyl cover is put on the area where the SRS knee airbag will deploy,

be sure to remove it.

●Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with inflation of the airbags. Such accessories may prevent the side airbags from activating correctly, disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury.

●Do not strike or apply significant levels of force to the area of the SRS air-

bag components. Doing so can cause the SRS airbags to malfunction.

●Do not touch any of the component parts immediately after the SRS air-

bags have deployed (inflated) as they may be hot.

●If breathing becomes difficult after the SRS airbags have deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so. Wash off any residue as soon as possible to prevent skin irritation.

●If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

41

CAUTION

■Modification and disposal of SRS airbag system components

Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury. ●Installation, removal, disassembly and repair of the SRS airbags ●Repairs, modifications, removal or replacement of the steering wheel, instrument panel, dashboard, seats or seat upholstery, front, side and rear pillars or roof side rails

●Repairs or modifications of the front fender, front bumper, or side of the

occupant compartment

●Installation of a grill guard (bull bars, kangaroo bar etc.), snow plows,

winches or roof luggage carrier.

●Modifications to the vehicle’s suspension system ●Installation of electronic devices such as mobile two-way radios and CD

players

●Modifications to your vehicle for a person with a physical disability

■If the SRS airbags deploy (inflate)

●Bruising and slight abrasions may result from contact with a deploying

(inflating) SRS airbag.

●A loud noise and white powder will be emitted. ●Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars, and roof side rails may be hot for several minutes. The airbag itself may also be hot.

●The windshield may crack. ●For Safety Connect subscribers, if the SRS airbags deploy or in the event of a severe rear-end collision, the system is designed to send an emergency call to the response center, notifying them of the vehicle’s location (without needing to push the “SOS” button) and an agent will attempt to speak with the occupants to ascertain the level of emergency and assistance required. If the occupants are unable to communicate, the agent automatically treats the call as an emergency and helps to dispatch the necessary emergency services. (P. 327)

4RUNNER (U)_(OM35B18U)

42

1-1. For safe use

■SRS airbag deployment conditions (SRS front airbags)

●The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approximately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform). However, this threshold velocity will be considerably higher in the following situations: • If the vehicle strikes an object, such as a parked vehicle or sign pole,

which can move or deform on impact

• If the vehicle is involved in an underride collision, such as a collision in which the front of the vehicle “underrides”, or goes under, the bed of a truck

●Depending on the type of collision, it is possible that only the seat belt pre-

tensioners will activate.

●The SRS front airbags for the front passenger will not activate if there is no passenger sitting in the front passenger seat. However, the SRS front air- bags for the front passenger may deploy if luggage is put in the seat, even if the seat is unoccupied. (P. 46)

■SRS airbag deployment conditions (SRS side and curtain shield airbags) ●The SRS side and curtain shield airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 3300 lb. [1500 kg] vehicle colliding with the vehicle cabin from a direction perpendicular to the vehicle orientation at an approximate speed of 12 - 18 mph [20 - 30 km/h]).

●The SRS curtain shield airbags will deploy in the event of vehicle rollover. ●The SRS curtain shield airbags may also deploy in the event of a severe

frontal collision.

■Conditions under which the SRS airbags may deploy (inflate), other than

a collision The SRS front airbags and SRS curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●Hitting a curb, edge of pavement or hard

surface

●Falling into or jumping over a deep hole ●Landing hard or falling

4RUNNER (U)_(OM35B18U)

1-1. For safe use

43

The SRS curtain shield airbags may also deploy under the situations shown in the illustration. ●The angle of vehicle tip-up is marginal. ●The vehicle skids and hits a curb stone.

■Types of collisions that may not deploy the SRS airbags (SRS front air-

bags) The SRS front airbags do not generally inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low-speed frontal collision. But, whenever a collision of any type causes sufficient forward deceleration of the vehicle, deployment of the SRS front airbags may occur. ●Collision from the side ●Collision from the rear ●Vehicle rollover

■Types of collisions that may not deploy the SRS airbags (SRS side and

curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment. ●Collision from the side to the vehicle body other than the passenger compart- ment

●Collision from the side at an angle

4RUNNER (U)_(OM35B18U)

44

1-1. For safe use

The SRS side airbags do not generally inflate if the vehicle is involved in a frontal or rear collision, if it rolls over, or if it is involved in a low-speed side collision. ●Collision from the front ●Collision from the rear ●Vehicle rollover

The SRS curtain shield airbags do not generally inflate if the vehicle is involved in a rear collision, if it pitches end over end, or if it is involved in a low-speed side or low-speed frontal collision. ●Collision from the rear ●Pitching end over end

■When to contact your Toyota dealer

In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ●Any of the SRS airbags have been inflated. ●The front of the vehicle is damaged or deformed, or was involved in an acci- dent that was not severe enough to cause the SRS airbags to inflate.

●A portion of a door or its surrounding area damaged or deformed, or the vehi- cle was involved in an accident that was not severe enough to cause the SRS side and curtain shield airbags to inflate.

4RUNNER (U)_(OM35B18U)

●The pad section of the steering wheel, dashboard near the front passenger air- bag or lower portion of the instrument panel is scratched, cracked, or other- wise damaged.

●The surface of the seats with the side airbag is scratched, cracked, or other- wise damaged.

●The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked, or other- wise damaged.

1-1. For safe use

45

4RUNNER (U)_(OM35B18U)

46

1-1. For safe use

Front passenger occupant classification system

Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger.

SRS warning light Seat belt reminder light “AIR BAG OFF” indicator light “AIR BAG ON” indicator light

4RUNNER (U)_(OM35B18U)

1-1. For safe use

47

Condition and operation in the front passenger occupant classi- fication system ■ Adult*1

“AIR BAG ON” and “AIR BAG OFF”

indicator lights

“AIR BAG ON”

Indicator/

warning light

SRS warning light

Seat belt reminder light

Front passenger airbag

Devices

Side airbag on the front passenger seat

Curtain shield airbag in the front

passenger side

Front passenger knee airbag

Front passenger's seat belt pretensioner

■ Child*3 or child restraint system*4

Indicator/

warning light

“AIR BAG ON” and “AIR BAG OFF”

indicator lights

SRS warning light

Seat belt reminder light

Front passenger airbag

Side airbag on the front passenger seat

Devices

Curtain shield airbag in the front

passenger side

Off

Flashing*2

Activated

“AIR BAG OFF”*5

Off

Flashing*2

Deactivated

Activated

Front passenger knee airbag

Deactivated

Front passenger's seat belt pretensioner

Activated

4RUNNER (U)_(OM35B18U)

48

1-1. For safe use

■ Unoccupied

Indicator/

warning light

“AIR BAG ON” and “AIR BAG OFF”

indicator lights

Not illuminated

SRS warning light

Seat belt reminder light

Off

Front passenger airbag

Deactivated

Devices

Side airbag on the front passenger seat

Curtain shield airbag in the front

passenger side

Front passenger knee airbag

Front passenger's seat belt pretensioner

Activated

Deactivated Activated*6
deactivated*7

or

4RUNNER (U)_(OM35B18U)

1-1. For safe use

49

■ There is a malfunction in the system

Indicator/

warning light

“AIR BAG ON” and “AIR BAG OFF”

indicator lights

“AIR BAG OFF”

SRS warning light

Seat belt reminder light

On

Flashing

Front passenger airbag

Deactivated

Side airbag on the front passenger seat

Devices

Curtain shield airbag in the front

passenger side

Activated

Front passenger knee airbag

Deactivated

Front passenger's seat belt pretensioner

Activated

*1: The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture.

*2: In the event the front passenger does not wear a seat belt. *3: When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending on his/her physique or posture.

*4: Never install a rear-facing child restraint system on the front passenger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (P. 53)

*5: In case the indicator light is not illuminated, consult this manual on how

to install the child restraint system properly. (P. 57)

*6: In the event of a side collision. *7: In the event of a frontal collision or vehicle rollover.

4RUNNER (U)_(OM35B18U)

50

1-1. For safe use

CAUTION

■Front passenger occupant classification system precautions

Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ●Wear the seat belt properly. ●Make sure the front passenger’s seat belt plate has not been left inserted

into the buckle before someone sits in the front passenger seat.

●Make sure the “AIR BAG OFF” indicator light is not illuminated when using the seat belt extender for the front passenger seat. If the “AIR BAG OFF” indicator light is illuminated, disconnect the extender tongue from the seat belt buckle, and reconnect the seat belt. Reconnect the seat belt extender after making sure the “AIR BAG ON” indicator light is illuminated. If you use the seat belt extender while the “AIR BAG OFF” indicator light is illumi- nated, the SRS airbags for the front passenger will not activate correctly, which could cause death or serious injury in the event of a collision.

●Do not apply a heavy load to the front passenger seat or equipment (e.g.

seatback pockets).

●Do not put weight on the front passenger seat by putting your hands or

feet on the front passenger seat seatback from the rear passenger seat.

●Do not let a rear passenger lift the front passenger seat with their feet or

press on the seatback with their legs.

●Do not put objects under the front passenger seat.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

51

CAUTION

■Front passenger occupant classification system precautions

●Do not recline the front passenger seatback so far that it touches a rear seat. This may cause the “AIR BAG OFF” indicator light to be illuminated, which indicates that the SRS airbags for the front passenger will not deploy in the event of a severe accident. If the seatback touches the rear seat, return the seatback to a position where it does not touch the rear seat. Keep the front passenger seatback as upright as possible when the vehicle is moving. Reclining the seatback excessively may lessen the effectiveness of the seat belt system.

●If an adult sits in the front passenger seat, the “AIR BAG ON” indicator light is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask the passenger to sit up straight, well back in the seat, feet on the floor, and with the seat belt worn correctly. If the “AIR BAG OFF” indicator still remains illuminated, either ask the passenger to move to the rear seat, or if that is not possible, move the front passenger seat fully rearward.

●When it is unavoidable to install a forward-facing child restraint system on the front passenger seat, install the child restraint system on the front pas- senger seat in the proper order. (P. 57) ●Do not modify or remove the front seats. ●Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately.

●Child restraint systems installed on the second seat should not contact the

front seatbacks.

●Do not use a seat accessory, such as a cushion and seat cover, that cov-

ers the seat cushion surface.

●Do not modify or replace the upholstery of the front seat.

4RUNNER (U)_(OM35B18U)

52

1-1. For safe use

Safety information for children

Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.

● It is recommended that children sit in the rear seats to avoid acci-

dental contact with the shift lever, wiper switch etc.

● Use the rear door child-protector lock or the window lock switch to avoid children opening the door while driving or operating the power window accidentally.

● Do not let small children operate equipment which may catch or pinch body parts, such as the power window, hood, back door, seats etc.

CAUTION

Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure themselves by playing with the windows, the moon roof or other features of the vehicle. In addition, heat build-up or extremely cold temperatures inside the vehicle can be fatal to children.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

53

Child restraint systems

A child restraint system for a small child or baby must itself be properly restrained on the seat with the LATCH anchors or the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.

Points to remember Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat. ● Choose a child restraint system that suits your vehicle and is appro-

priate to the age and size of the child.

● For installation details, follow the instructions provided with the child

restraint system. General installation instructions are provided in this manual. (P. 57)

4RUNNER (U)_(OM35B18U)

54

1-1. For safe use

Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child:  Rear facing  Infant seat/con-

 Forward facing  Convertible

vertible seat

seat

 Booster seat

■Selecting an appropriate child restraint system

●Use a child restraint system appropriate for the child until the child becomes

large enough to properly wear the vehicle’s seat belt.

●If the child is too large for a child restraint system, sit the child on a rear seat

and use the vehicle’s seat belt. (P. 30)

4RUNNER (U)_(OM35B18U)

1

1-1. For safe use

55

CAUTION

■Child restraint precautions

●For effective protection in automobile accidents and sudden stops, a child must be properly restrained, using a seat belt or child restraint system depending on the age and size of the child. Holding a child in your arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. ●Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.

●Never install a rear-facing child restraint system on the front passenger

seat even if the “AIR BAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front pas- senger airbag can cause death or serious injury to the child if the rear-fac- ing child restraint system is installed on the front passenger seat.

●A forward-facing child restraint system may be installed on the front pas- senger seat only when it is unavoidable. A child restraint system that requires a top tether strap should not be used in the front passenger seat since there is no top tether strap anchor for the front passenger seat. Adjust the seatback as upright as possible and always move the seat as far back as possible even if the “AIR BAG OFF” indicator light is illumi- nated, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously injured.

●Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of an accident.

●Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front and rear pillars or roof side rails from which the SRS side airbags or SRS curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the SRS side airbags and curtain shield airbags inflate, and the impact could cause death or serious injury to the child.

●Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop, sudden swerve or accident.

4RUNNER (U)_(OM35B18U)

56

1-1. For safe use

CAUTION

■When children are in the vehicle

Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.

■When the child restraint system is not in use

●Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the child restraint system unsecured in the pas- senger compartment.

●If it is necessary to detach the child restraint system, remove it from the vehicle or store it securely in the luggage compartment. This will prevent it from injuring passengers in the event of a sudden stop, sudden swerve or accident.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

57

Installing child restraints

Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using the LATCH (Lower Anchors and Tethers for Children) anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH system.

 Vehicles without third row seats Child restraint LATCH anchors

LATCH anchors are provided for the outboard rear seats. (Buttons displaying the anchors are attached to the seats.)

location of

the

 Vehicles with third row seats Child restraint LATCH anchors

LATCH anchors are provided for the outboard second row seats. (Buttons displaying the location of the anchors are attached to the seats.)

Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt) (P. 31)

4RUNNER (U)_(OM35B18U)

58

1-1. For safe use

 Vehicles without third row seats Anchor brackets (for top tether strap)

An anchor bracket is provided for each rear seat.

 Vehicles with third row seats Anchor brackets (for top tether strap)

An anchor bracket is provided for each second row seat.

4RUNNER (U)_(OM35B18U)

Installation with LATCH system (rear/second row seats only) ■ Installing on the rear seats (vehicles without third row seats)

1-1. For safe use

59

Fold the seatback while pull- ing the seatback angle adjustment lever. Return the seatback and secure it at the first lock position. (P. 122)

 Type A

strap

Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connec- tor system.

Canada only

4RUNNER (U)_(OM35B18U)

60

1-1. For safe use

 Type B

Latch the buckles onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connec- tor system.

■ Installing on the second row seats (vehicles with third row

seats)

Canada only

Fold the seatback while pull- ing the seatback angle adjustment lever. Return the seatback and secure it at the first lock position. (P. 122) Flip the cover.

4RUNNER (U)_(OM35B18U)

 Type A

strap

Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connec- tor system.

 Type B

Latch the buckles onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connec- tor system.

1-1. For safe use

61

Canada only

Canada only

4RUNNER (U)_(OM35B18U)

62

1-1. For safe use

Installing child restraints using a seat belt (child restraint lock function belt) ■ Rear-facing  Infant seat/convertible seat

Place the child restraint sys- tem on the rear seat facing the rear of the vehicle.

Run the seat belt through the child restraint system and insert the buckle. Make sure that the belt is not twisted.

the plate

into

Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

63

rear seat, allow

While pushing the child restraint system down into the the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.

■ Forward-facing Convertible seat

Place the child restraint sys- tem on the seat facing the front of the vehicle.

Run the seat belt through the child restraint system and insert the buckle. Make sure that the belt is not twisted.

the plate

into

4RUNNER (U)_(OM35B18U)

64

1-1. For safe use

Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.

retract until

While pushing the child restraint system into the rear seat, allow the shoulder belt to the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (P. 66)

4RUNNER (U)_(OM35B18U)

■ Booster seat

1-1. For safe use

65

Place the child restraint sys- tem on the seat facing the front of the vehicle.

Sit the child in the child restraint system. Fit the seat belt to the child restraint sys- tem according to the manu- instructions and facturer’s insert the buckle. Make sure that the belt is not twisted. Check that the shoulder belt is correctly positioned over the child’s shoulder and that the lap belt is as low as possible. (P. 30)

the plate

into

Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt.

4RUNNER (U)_(OM35B18U)

66

1-1. For safe use

Child restraint systems with a top tether strap

Secure the child restraint sys- tem using the seat belt or the lower anchors, and remove the head restraint.

Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.

Replace the head restraint.

■Laws and regulations pertaining to anchorages

The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

67

CAUTION

■When installing a booster seat

To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (P. 31)

■When installing a child restraint system

Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of a sudden braking or an accident. ●If the driver’s seat interferes with the child restraint system and prevents it from being attached correctly, attach the child restraint system to the right-hand rear seat.

●Adjust the front passenger seat so that it does not interfere with the child restraint system.

●Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint system on the front pas- senger seat, move the seat as far back as possible even if the “AIR BAG OFF” indicator light is illuminated. Failure to do so may result in death or serious injury if the airbags deploy (inflate).

4RUNNER (U)_(OM35B18U)

68

1-1. For safe use

CAUTION

■When installing a child restraint system

●Vehicles with third row seats: When using the LATCH anchors for a child restraint system, move the seat as far back as possible, with the seatback close to the child restraint system.

●When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder. Failing to do so may result in death or serious injury in the event of an accident or a sudden braking.

●Ensure that the belt and plate are securely locked and the seat belt is not

twisted.

●Shake the child restraint system left and right, and forward and backward

to ensure that it has been securely installed.

●After securing a child restraint system, never adjust the seat. ●Follow all installation instructions provided by the child restraint system

manufacturer.

■Do not use a seat belt extender

If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of a sud- den braking, sudden swerving or an accident.

■To correctly attach a child restraint system to the anchors

●When using the LATCH anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system. Make sure the child restraint system is securely attached, or it may cause death or serious injury to the child or other passengers in the event of a sudden braking or an accident.

●When using

the

left side LATCH anchors for the child restraint system, do not sit in the center seat. Seat belt function may be impaired, such as being positioned overly high or loose-fit- ting, which may result in death or seri- ous injury in the event of sudden braking or an accident.

4RUNNER (U)_(OM35B18U)

1-1. For safe use

69

Exhaust gas precautions

Harmful substance to the human body is included in exhaust gases if inhale.

CAUTION

Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard. ■Important points while driving

●Keep the back door closed. ●If you smell exhaust gases in the vehicle even when the back door is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible.

■When parking

●If the vehicle is in a poorly ventilated area or a closed area, such as a

garage, stop the engine.

●Do not leave the vehicle with the engine on for a long time.

If such a situation cannot be avoided, park the vehicle in an open space and ensure that exhaust fumes do not enter the vehicle interior.

●Do not leave the engine running in an area with snow build-up, or where it is snowing. If snowbanks build up around the vehicle while the engine is running, exhaust gases may collect and enter the vehicle.

■Exhaust pipe

The exhaust system needs to be checked periodically. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer.

4RUNNER (U)_(OM35B18U)

70

1-2. Theft deterrent system

Engine immobilizer system

The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.

 Vehicles without a smart key system The indicator light flashes after the key has been removed from the engine switch to indicate that the system is operating. The indicator light stops flashing after the registered key has been inserted into the engine switch to indicate that the system has been canceled.  Vehicles with a smart key system The indicator light flashes after the engine switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the engine switch has been turned to ACCESSORY or IGNITION ON mode to indicate that the system has been canceled.

■System maintenance

The vehicle has a maintenance-free type engine immobilizer system.

■Conditions that may cause the system to malfunction

●If the grip portion of the key is in contact with a metallic object ●If the key is in close proximity to or touching a key to the security system

(key with a built-in transponder chip) of another vehicle

4RUNNER (U)_(OM35B18U)

1

1-2. Theft deterrent system

71

■Certifications for the engine immobilizer system (vehicles without a

smart key system)  For vehicles sold in the U.S.A. FCC ID:MOZRI-33BTY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.  For vehicles sold in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

■Certifications for the engine immobilizer system (vehicles with a smart

key system)  For vehicles sold in the U.S.A. FCC ID: NI4TMIMB-1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.  For vehicles sold in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

CAUTION

■Certifications for the engine immobilizer system

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTICE

■To ensure the system operates correctly

Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

4RUNNER (U)_(OM35B18U)

1-2. Theft deterrent system

72
Alarm

The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than using the entry function, wireless remote control or mechanical key. (The doors will lock again automatically.)

● The hood is opened.

Setting the alarm system Close the doors and hood, and lock all the doors. The system will be set automatically after 30 sec- onds.

The indicator light changes from being on to flashing when the sys- tem is set.

Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarms: ● Unlock the doors. ● Start the engine. (The alarm will be deactivated or stopped after a

few seconds.)

: If equipped

4RUNNER (U)_(OM35B18U)

1-2. Theft deterrent system

73

■System maintenance

The vehicle has a maintenance-free type alarm system.

■Items to check before locking the vehicle

To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ●Nobody is in the vehicle. ●The windows and moon roof are closed before the alarm is set. ●No valuables or other personal items are left in the vehicle.

■Triggering of the alarm

The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ●A person inside the vehicle opens a door

or the hood.

●The battery is recharged or replaced

when the vehicle is locked.

■Alarm-operated door lock

●When the alarm is operating, the doors are locked automatically to prevent

intruders.

●Do not leave the key inside the vehicle when the alarm is operating, and make sure the key is not inside the vehicle when recharging or replacing the battery.

NOTICE

■To ensure the system operates correctly

Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

4RUNNER (U)_(OM35B18U)

74

1-2. Theft deterrent system

4RUNNER (U)_(OM35B18U)

Instrument cluster

2.

75

Instrument cluster Warning lights and indicators .......................... 76
Gauges and meters ............ 81
Multi-information display ..... 83

4RUNNER (U)_(OM35B18U)

76

2. Instrument cluster

Warning lights and indicators

The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.

The units used on the speedometer and some indicators may differ depending on where the vehicle is sold.

4RUNNER (U)_(OM35B18U)

2. Instrument cluster

77

Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems.

Cruise control indicator light (P. 413)

Slip indicator (P. 413)

Four-wheel drive indica- tor light (P. 413)

four-wheel

Low speed drive indicator light (P. 414)

Rear differential lock indicator light (P. 413)

Center differential lock indicator light (P. 414)

Multi-terrain Select indi- cator light (P. 414)

Smart key system warn- ing light (P. 415)

*1

(U.S.A.) *1

(Canada) *1

*1

(U.S.A.) *1

(Canada) *1

*1

(U.S.A.) *1

(Canada)

Brake system warning light (P. 412)

Brake system warning light (P. 412)

Charging system warn- ing light (P. 412)

Malfunction lamp (P. 412)

indicator

Malfunction lamp (P. 412)

indicator

SRS warning light (P. 413)

ABS warning light (P. 413)

ABS warning light (P. 413)

*2

*1

*3

(if equipped) *3

(if equipped) *3

(if equipped) *3

(if equipped) *4

(if equipped)

(if equipped)

4RUNNER (U)_(OM35B18U)

78

2. Instrument cluster

Open door warning light (P. 414)

*1 Master warning light

(P. 421)

Low fuel level warning light (P. 414)

*1

Tire pressure warning light (P. 415)

Seat belt reminder light (P. 415)

Low engine oil pressure warning light (P. 412)

Power steering warning light (P. 414)

*1

*1

(if equipped) *1

(if equipped) *1, 2

(if equipped)

Unengaged “Park” warn- ing light (P. 414)

KDSS warning (P. 414)

light

Automatic boards (P. 414)

running light

indicator

*1: These lights turn on when the engine switch is turned to IGNITION ON mode (vehicles with a smart key system) or the engine switch is turned to the “ON” position (vehicles without a smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or do not turn off. Have the vehicle inspected by your Toyota dealer.

*2: The light flashes to indicate a malfunction. *3: The light flashes rapidly to indicate a malfunction. *4: The light flashes continuously to indicate a malfunction.

4RUNNER (U)_(OM35B18U)

2. Instrument cluster

79

Indicators The indicators inform the driver of the operating state of the vehicle’s various systems.

Turn signal indicator (P. 202)

*1, 2

Slip indicator (P. 260)

Headlight indicator (P. 204)

Tail light indicator (P. 204)

(U.S.A.)

(Canada)

*1 VSC OFF indicator

(P. 261)

*1, 4

“AIR BAG ON/OFF” indi- cator (P. 46)

Headlight high beam indicator (P. 207)

Cruise control set indica- tor (P. 221)

Front fog light indicator (P. 210)

*4

Security indicator (P. 70, 72)

*1, 3 Eco Driving Light (P. 87)

Indicator

*1

“TRAC OFF” indicator (P. 261)

Cruise control indicator (P. 221)

(if equipped) *1

(if equipped)

(if equipped)

(if equipped)

(if equipped)

Four-wheel drive indica- tor (P. 231)

Downhill assist control system indicator (P. 246)

four-wheel

Low speed drive indicator (P. 231, 235)

Rear differential indicator (P. 243)

lock

Center differential lock indicator (P. 235)

4RUNNER (U)_(OM35B18U)

80

2. Instrument cluster

“A-TRAC” indicator (P. 239)

“AUTO LSD” (P. 241)

indicator

*1

(if equipped) *1, 2

(if equipped)

Crawl Control indicator (P. 249)

Automatic boards indicator (P. 111)

running

(if equipped)

*1

(if equipped)

Multi-terrain Select indi- cator (P. 252)

(if equipped) *1: These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart key system) or the engine switch is turned to IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or do not turn off. Have the vehicle inspected by your Toyota dealer.

*2: The light flashes to indicate that the system is operating. *3: The light does not turn on when the system is disabled. *4: This light illuminates on the center panel.

CAUTION

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.

4RUNNER (U)_(OM35B18U)

2. Instrument cluster

81

Gauges and meters

The displayed content may differ depending on the type of meter.

Tachometer Displays the engine speed in revolutions per minute Engine coolant temperature gauge Displays the engine coolant temperature Shift position and shift range Displays the selected shift position or selected shift range (P. 199) Fuel gauge Displays the quantity of fuel remaining in the tank Speedometer Displays the vehicle speed Odometer/trip meter display change button Switches the trip information. Multi-information display Presents the driver with a variety of vehicle data P. 83

4RUNNER (U)_(OM35B18U)

82

2. Instrument cluster

Instrument panel light control The brightness of the instrument panel lights can be adjusted.

Brighter Darker

■The meters and display illuminate when

 Vehicles without a smart key system

The engine switch is in the “ON” position.

 Vehicles with a smart key system

The engine switch is in IGNITION ON mode.

■The brightness of the instrument panel lights

When the headlight switch is turned to on, the brightness will be reduced slightly unless the control dial is turned fully upward.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 450)

4RUNNER (U)_(OM35B18U)

2. Instrument cluster

83

Multi-information display

Display contents The multi-information display presents the driver with a variety of driv- ing-related data.