2003 Toyota 4runner Owners Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

168
168
185
187
195

For vehicle equipped with Navigation system, please refer to the separate “Navigation System Owner’s Manual”.

167

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

Reference

Type 1: AM·FM radio/cassette player/com- pact disc player (with compact disc changer controller)

Type 2: AM·FM radio/cassette player/com- pact disc player with changer

“FM”,

“AM”,

“TAPE”,

Using your audio system— —Some basics This section describes some of the basic features on Toyota audio systems. Some information may not pertain to your sys- tem. Your audio system works when the ignition key is in the “ACC” or “ON” position. TURNING THE SYSTEM ON AND OFF Push “PWR·VOL” to turn the audio system on and off. Push “DISC” or “LOAD” to turn on that function without pushing “PWR·VOL”. To turn on the cas- sette or compact disc player, a cassette or compact disc must be loaded in the player. You can turn on each player by inserting a cassette tape or compact disc. You can turn off each player by ejecting the cassette tape or compact disc. If the audio system was previously off, then the entire audio system will be turned off when you eject the cassette tape or com- pact disc. If the another function was pre- viously playing, it will come on again. SWITCHING BETWEEN FUNCTIONS Push “DISC” or “LOAD” if the system is already on but you want to switch from one function to another.

“TAPE”,

“AM”,

“FM”,

168

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

TONE AND BALANCE For details about your system’s tone and balance controls, see the description of your own system. Tone How good an audio program sounds to you is largely determined by the mix of the treble, midrange and bass levels. In fact, different kinds of music and vocal programs usually sound better with differ- ent mixes of treble, midrange and bass. Balance A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the vol- ume of one group of sounds while de- creasing the volume of another.

YOUR RADIO ANTENNA Your vehicle has an antenna printed on the inside of the rear quarter window.

NOTICE

Attaching the film (especially conduc- tive or metallic type) on the rear quarter glass will noticeably reduce the sensitivity of the radio.

YOUR CASSETTE PLAYER When you insert a cassette, the exposed tape should face to the right.

NOTICE

Do not oil any part of the player and do not insert anything other than cas- sette tapes into the slot, or the tape player may be damaged.

YOUR COMPACT DISC PLAYER (type 1) When you insert a disc, gently push it in with the label side up. (The player will automatically eject a disc if the label side is down.) The player will play from track 1 through the end of the disc. Then it will play from track 1 again.

NOTICE

Never try to disassemble or oil any part of the compact disc player. Do not insert anything other than com- pact discs into the slot.

The player is intended for use with 12 cm (4.7 in.) discs only.

169

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

YOUR COMPACT DISC PLAYER WITH CHANGER (type 2) When you insert a disc, push the “LOAD” button and gently push the disc in with the label side up. (The player will auto- matically eject a disc if the label side is down.) This compact disc player can store up to six discs. The player will play from track 1 through the end of the disc. Then it will play from track 1 of the next disc. The player is intended for use with 12 cm (4.7 in.) discs only.

NOTICE

(cid:4) Do not stack up two discs for in- sertion, or it will cause damage to the compact disc player. Insert only one compact disc into slot at a time.

(cid:4) Never try to disassemble or oil any part of the compact disc player. Do not insert anything except a com- pact disc into the slot.

170

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

—Controls and features (cid:1)Type 1

Details of specific buttons, controls and features are described in the alphabetical list that follows.

171

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

(See

to preset and

1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. “TUNE” or “SEEK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The button number will appear on the display. To recall a preset station: Push the button for the station you want. The button num- ber and station frequency will appear on the display. These systems can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM” or “FM” button.)

(Eject button) the cassette

Push tape eject button to eject a cassette. Push the compact disc eject button to eject a compact disc.

172

’03 4Runner_U (L/O 0305)

(Program)

Compact disc player

” indicates the top side, “

Push “ ” (preset button 4) to select the other side of a cassette tape. The display indicates which side is currently selected (“ ” indicates the bottom side). Auto–reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding.

feature: After

(Reverse/Fast forward button)

Cassette player

Push “ ” (preset button 6) to fast for- ward a cassette tape. “FF” will appear on the display. Push “ ” (preset button 5) to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast forward- ” or “TAPE” button. To stop ing, push “ the tape while it is rewinding, push “ ” or “TAPE” button. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette will play the other side of the tape using the auto–reverse feature.

” (preset button 6) or Push and hold “ “ ” (preset button 5) to fast forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM Push the “AM” button to turn on the radio and select the AM band. “AM” will appear on the display. AUDIO CONTROL (Tone and sound bal- ance adjustment function) By using the “AUDIO CONTROL” knob, you can adjust the tone and sound bal- ance. On some models, you can also turn on or off the surround function. Each time you push this knob, the mode changes. To adjust the tone and balance and turn on or off the surround function, turn the knob. BAS: Adjusts low–pitched tones. The dis- play ranges from –5 to 5. MID: Adjusts mid–pitched tones. The dis- play ranges from –5 to 5. TRE: Adjusts high–pitched tones. The dis- play ranges from –5 to 5.

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

ON”

“SURROUND

FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. SURROUND: Turn on or off the surround function. or “SURROUND OFF” will appear on the display. DISC (Compact disc) Push the “DISC” button to play a compact disc. When the audio system is set into com- pact disc operation, the display shows the track, or track and disc number currently being played. Error messages If the player malfunctions, your audio sys- tem will display one of the six following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up–side down). Clean the disc and re–insert it.

incorrectly

inserted

’03 4Runner_U (L/O 0305)

“NO DISC”: The compact disc changer of separate unit is empty. Insert a disc. “ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over–current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of separate unit is open. Close the compact disc changer lid. If the malfunction still exists, take your vehicle to your Toyota dealer. (cid:2) DISC (cid:1) With compact disc changer only— Use these buttons to select the disc you want to listen to. Push “(cid:2)” (preset button 3) or “(cid:1)” (preset button 4) until the number of the disc you want to listen appears on the display. Dolby(cid:3) If you are listening to a tape that was recorded with Dolby(cid:3) B Noise Reduction, push “ ” will appear on the display. Push the button again to turn off Dolby(cid:3) B NR.

” (preset button 3). “

B NR*

The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used to re- cord the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. FM Push the “FM” button to turn on the radio and select the FM band. “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM stations, two for each of the preset button. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random) There are two random features—you can either listen to the tracks on one compact to disc the listen tracks on all the compact discs in the magazine in random order.

in random order, or

173

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

the player will perform

To play the tracks on one disc in random order: Quickly push and release “RAND” (preset button 1). “ ” will appear on the display and the tracks on the disc you are listening to in random order. To turn off the random fea- ture, push this button again. With compact disc changer only— To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) ” will ap- until you hear a beep. “ pear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the this button again. RPT (Repeat) Cassette player Push “RPT” (preset button 2) while the ” will appear on track is playing. “ the display. When the track ends, it will automatically rewind and replay. To turn off feature, push this button again. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly. 174

feature, push

the repeat

random

’03 4Runner_U (L/O 0305)

the

track

Compact disc player There are two repeat features—You can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the track ends, it will automatically replay. To turn off the repeat feature, push this button again. With compact disc changer only— Repeating a disc: Push and hold “RPT” (preset button 2) until you hear a beep. “ ” will ap- pear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the top track of the disc and replay. To turn off the repeat feature, push this button again.

SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again.

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

listening

Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release the “SCAN” but- ton. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning. With compact disc changer only— Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a ·SCAN” will appear on the dis- beep. “ play and the player will scan the first track of the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning.

the seek mode,

the radio finds and the next station up or down the

SEEK/TRACK (Seeking/Track up/down) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. Cassette Player Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one). A blank space of at least 3 seconds is considered to be a start of a recording. When a beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings.

Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “(cid:1)” or “(cid:2)” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push the “TAPE” button to play a cassette tape.

175

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

to

to

title,

track

then back

TEXT This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear. TUNE (Tuning) Turn the “TUNE” knob clockwise to step up the frequency. Turn the knob counter- clockwise to step down the frequency.

176

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

(cid:1)Type 2

Details of specific buttons, controls and features are described in the alphabetical list that follows.

177

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

(See

to preset and

1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. “TUNE” or “SEEK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset button number will appear on the display. RDS stations will be preset to the buttons when you turn on the RDS. (See “RDS” button.) To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. This radio can store one AM, two FM and RDS stations for each button. (The display will show “FM TYPE” when you push “AM” or “FM” but- ton.)

“FM2” or

“FM1”,

“AM”,

’03 4Runner_U (L/O 0305)

(Eject button)

(Program)

Cassette player This button is used to eject a cassette. Compact disc player This button is used to eject one or all compact discs. To eject the current compact disc, push and release the compact disc eject button. To eject a specific disc, push “(cid:2)” (preset button 3) or “(cid:1)” (preset button 4) until the number of the disc you want to eject is displayed. Push and release the eject but- ton. To eject all discs at a time, press and hold the eject button until you hear a beep. The last compact disc played before pushing the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled.

” indicates the top side, “

Push “ ” (preset button 4) to select the other side of a cassette tape. The display indicates which side is currently selected (“ ” indicates the bottom side). Auto–reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding.

feature: After

(Reverse/Fast forward button)

Cassette player

Push “ ” (preset button 6) to fast for- ward a cassette tape. “FF” will appear on the display. Push “ ” (preset button 5) to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast forward- ” or “TAPE” button. To stop ing, push “ the tape while it is rewinding, push “ ” or “TAPE” button. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette will play the other side of the tape using the auto–reverse feature.

178

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

Compact disc player

” (preset button 6) or Push and hold “ “ ” (preset button 5) to fast forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM Push the “AM” button to turn on the radio and select the AM band. “AM” will appear on the display. AUDIO CONTROL (Tone and sound bal- ance adjustment function) By using the “AUDIO CONTROL” knob, you can adjust the tone and sound bal- ance, and the surround function. Each time you push this knob, the mode changes. To adjust the tone and balance and turn on or off the surround function, turn the knob. BAS: Adjusts low–pitched tones. The dis- play ranges from –5 to 5. MID: Adjusts mid–pitched tones. The dis- play ranges from –5 to 5. TRE: Adjusts high–pitched tones. The dis- play ranges from –5 to 5.

turn on or off

“SURROUND ON” or

FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. SURROUND: Turn on or off the surround function. “SUR- ROUND OFF” will appear on the display. DISC (Compact disc) Push the “DISC” button to play a compact disc. When the audio system is set into com- pact disc operation, the display shows the track, or track and disc number currently being played. Error messages If the player malfunctions, your audio sys- tem will display one of the six following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up–side down). Clean the disc and re–insert it. “NO DISC”: The compact disc changer of separate unit is empty. Insert a disc.

incorrectly

inserted

“ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over–current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of separate unit is open. Close the compact disc changer lid. If the malfunction still exists, take your vehicle to your Toyota dealer. (cid:2) DISC (cid:1) Use these buttons to select a disc you want to listen to. Push “(cid:2)” (preset button 3) or “(cid:1)” (preset button 4) until the number of the disc you want to listen appears on the display. Dolby(cid:3) If you are listening to a tape that was recorded with Dolby(cid:3) B Noise Reduction, push “ ” will appear on the display. Push the button again to turn off Dolby(cid:3) B NR.

” (preset button 3). “

B NR*

179

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used to re- cord the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. FM Push the “FM” button to turn on the radio and select the FM band. “FM1”, “FM2” or “FM TYPE” will appear on the display. This system allows you to set twelve FM and six RDS stations, three for each of the preset button. If the RDS is off or RDS stations are not preset to the preset buttons, “FM TYPE” will not appear on the display. LOAD This button is used to load the compact discs the compact disc player. This player can store up to six discs. To load one compact disc only, quickly push and release the button, then insert a compact disc. After the disc is loaded, the shutter of the slot will close. If no compact disc is inserted, the shutter will close after 15 seconds.

in

180

To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on), then insert the first compact disc. After the disc is loaded, the shutter of the slot will close. After a few seconds, the shutter will auto- matically open again so the next disc can be inserted. The same process can be applied for loading the rest of the discs. If the player is full of discs, “DISC FULL” will appear on the display. If no compact disc is inserted, the shutter will close after 15 seconds. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RDS (Radio Data System) Your audio system is equipped with Radio Data System (RDS). RDS station providing good reception is automatically selected if current reception worsens. The “RDS” button turns the RDS on and off. This button is operational except in AM mode.

turns on,

the radio starts

To turn on the RDS, push and hold this button until you hear a beep and “RDS” will appear on the display. At this time, the radio starts to search the RDS sta- tions and “RDS SEARCH” will flash on the display. Quickly push and release this button when the RDS to search “RDS the RDS stations and SEARCH” will flash on the display. When found, stations are “FOUND” and the number of the RDS sta- tions will appear on the display, and you will hear two beeps. The stations will be preset to the preset buttons. If the RDS stations can not be found, “NO RDS ST” will appear on the display and you will hear a beep, and the display returns to the previous mode. To turn the RDS off, push the button until you hear a beep again.

the RDS

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

in random order, or

RAND (Random) There are two random features—you can either listen to the tracks on one compact to disc the listen tracks on all the compact discs in the magazine in random order. To play the tracks on one disc in random order: Quickly push and release “RAND” (preset ” will appear on the button 1). “ display and the tracks on the disc you are listening to in random order. To turn off the random fea- ture, push this button again. To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) ” will ap- until you hear a beep. “ pear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the this button again.

the player will perform

feature, push

random

the repeat

RPT (Repeat) Cassette player Push “RPT” (preset button 2) while the ” will appear on track is playing. “ the display. When the track ends, it will automatically rewind and replay. To turn off feature, push this button again. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly. Compact disc player There are two repeat features—You can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the track ends, it will automatically replay. To turn off the repeat feature, push this button again.

track

the

Repeating a disc: Push and hold “RPT” (preset button 2) ” will ap- until you hear a beep. “ pear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the top track of the disc and replay. To turn off the repeat feature, push this button again. SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold “(cid:1)” or “(cid:2)” side of the “SCAN” button until you hear a beep. The radio will tune in the next preset station up or down the band, stay there for 5
seconds, and then move to the next pre- set station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release “(cid:1)” or “(cid:2)” side of the “SCAN” button. The radio will find the next station up or down the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again.

181

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release “(cid:1)” or “(cid:2)” side of the “SCAN” button. “SCAN” will appear on the display and the player will scan up or down all the tracks on the disc you are listening to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning. Scanning the first tracks of all the discs in the magazine: Push “(cid:1)” or “(cid:2)” side of the “SCAN” but- ·SCAN” will ton until you hear a beep. “ appear on the display and the player will scan up or down the first track of the next disc. To stop scanning, push this button again. the auto changer has scanned all the discs, it will stop scan- ning.

If

182

the seek mode,

the radio finds and the next station up or down the

SEEK/TRACK (Seeking/Track up/down) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. Cassette Player Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one). A blank space of at least 3 seconds is considered to be a start of a recording. When a beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings.

Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “(cid:1)” or “(cid:2)” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push the “TAPE” button to play a cassette tape.

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

in RDS

is operational only

TEXT Radio This button mode. When an RDS radio station transmits a text message, “TEXT” will be displayed. At this time, push the “TEXT” button to view the text message. The message display will be canceled if any button that affects the display is pushed. To view the mes- sage again, push this button again. After the entire message has been displayed, the message will disappear. The RDS audio system has memory to store three 64–character messages. To store a message in memory, push and hold the “TEXT” button until you hear a beep. If three messages are already stored in memory, the oldest message will be over- written by the new message. To recall a radio text message, push the “TEXT” button momentarily. This will dis- play the most recent message. Each push of the button will display messages in the order of most to least recent.

If no messages have been stored, or if there are no more messages to be re- called, “NO MESSAGE” will appear on the display, and the message display will be canceled. The message display will be canceled if you activate any function that affects the display. Compact disc player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear.

then back

track

title,

to

to

the

“TRAF” button,

TRAF (Traffic) This button turns the traffic announcement (TA) feature on and off. This button is operational only in FM mode. By pushing “TRAF SEEK” will flash on the display and the radio will start seeking any traffic program station. When a traffic program station is found, “TRAF” will be displayed and you will hear a beep. After the traffic announcement program is over, the display returns to the previous mode. If no traffic program station is found, “NO TRAF INFO” appears on the display for a few seconds and the display returns to the previous mode. To cancel the traffic announcement, push this button again. TUNE (Tuning) Turn the “TUNE” knob clockwise to step up the frequency. Turn the knob counter- clockwise to step down the frequency.

183

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

TYPE (Program Types) When you push the “TYPE” button while receiving an RDS station, the current pro- gram type appears on the display. Each time you push this button, the pro- gram type changes as in the following: (cid:2) ROCK (cid:2) EASY LIS (Easy listening) (cid:2) CLS/JAZZ (Classical music and Jazz) (cid:2) R&B (Rhythm and Blues) (cid:2) INFORM (Information) (cid:2) RELIGION (cid:2) MISC (Miscellaneous) (cid:2) ALERT (Emergency message)

184

’03 4Runner_U (L/O 0305)

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

Audio remote controls (steering switches)

’03 4Runner_U (L/O 0305)

Some parts of the audio system can be adjusted using the switches on the steer- ing wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switch 2. “(cid:1)(cid:2)” switch 3. “MODE” switch

185

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

to

increase while

1. Volume control switch Push “+” to increase the volume. The vol- ume continues the switch is being pushed. Push “–” the volume. The to decrease volume continues to decrease while the switch is being pushed. 2. “(cid:1)(cid:2)” switch Radio This switch has the following features— To select a preset station: Quickly push and release the “(cid:1)” or “(cid:2)” side of the switch. Do this again to select the next preset station. To seek a station: Push and hold the “(cid:1)” or “(cid:2)” side of the switch until you hear a beep. Do this again to find the next station. If you push the switch on either side during the seek mode, seeking will be cancelled. Cassette player This switch has the following features— To skip to a different track in either direc- tion: Quickly push and release the “(cid:1)” or “(cid:2)” side of the switch. “FF 1” or “REW 1” will appear on the display.

Next, push either side of the track switch until the track you want to listen to is set. If you push the switch ten times, the skip function will turn off. (You can skip up to nine tracks at a time.) When counting the number of the tracks you want to rewind, remember to count the current track as well. For example, if you want to rewind to a song that is two tracks before the song you are listening to, push the “(cid:2)” side of the switch three times. If you push the track switch further than you wanted to, push the other side of the switch. The in- creased or reduced. The track number you select is not valid if the tracks remaining on the current side of the cassette. (cid:2) When the tape reaches to the begin- ning, the player will automatically start playing that side.

track number will be

the number of

is higher

than

it

(cid:2) After the tape reaches to the end, the reverse and

player will automatically start playing the other side.

There must be at least 3 seconds of blank space between tracks for the track switch to work correctly. In addition, the feature may not work well with some spoken, live, or classical recordings. To fast forward or reverse: Push and hold the “(cid:1)” side of the switch to fast forward a cassette tape. “FF” will appear on the display. Push and hold the “(cid:2)” side of the switch to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast forward- ing, push the “(cid:1)” side of the switch. To stop the tape while it is rewinding, push the “(cid:2)” side of the switch. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette will play the other side of the tape using the auto–reverse feature. Compact disc player Use this switch to skip up or down to a different track in either direction. Quickly push and release the “(cid:1)” or “(cid:2)” side of the switch until the track you want to listen to is set. If you want to return to the beginning of the current track, push the “(cid:2)” side of the switch once, quickly.

186

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

With compact disc changer only— Push and hold the “(cid:1)” or “(cid:2)” side of the switch until the disc you want to listen to is set. 3. “MODE” switch Push “MODE” switch to select an audio mode. Each push changes the mode se- quentially if the desired mode is ready to use. To turn the audio system on, push the “MODE” switch. To turn the audio system off, push and hold the “MODE” switch until the system turns off.

’03 4Runner_U (L/O 0305)

if

the

front audio system

Rear seat audio system— The rear seat audio system is designed for the rear seat passengers to enjoy the audio sound separately between the front seats and rear seats. The rear seat audio system can be turned on with the rear audio system controller even is off. When the front audio is turned off, the rear audio system will be turned off simul- taneously. The rear passengers can enjoy all the modes (AM and FM radio, cassette tape player, compact disc player, compact disc player with changer and DVD player) with the rear seat audio system when a cas- sette tape and discs are loaded in the front audio system. When the same mode is selected on the front and rear audio systems at the same time, the system can be operated on the front audio system. If the radio mode is selected on the front and rear audio systems at the same time, AM and FM modes cannot be changed on the rear seat audio system. You can enjoy the rear seat audio system with a special headphone. For details, re- fer to the manufacturer’s instructions.

The wireless headphone can be used with- in a radius of approximately 7 m (23 ft.) from the rear seat audio system. If the signal becomes weak, the headphone will mute. You can purchase a wireless headphone at a Toyota dealer.

CAUTION

(cid:2) Do not drive with using the head- phone. Otherwise, you may be hard to hear the sound from the outside while using the headphone and may cause an accident.

(cid:2) With DVD player:

that

Conversational speech on some DVDs is recorded at a low volume to emphasize the impact of sound If you adjust the volume effects. assuming the conversations represent the maximum volume lev- el that the DVD will play, you may be startled by louder sound effects or when you change to a different audio source. Be sure to adjust the volume with this in mind. Make sure the volume creased, before you headphone.

is not turn on

in- the

187

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

The rear seat audio system consists of following components. 1. Front audio system 2. Rear seat audio system display 3. Rear seat audio system controller 4. Controller holder

—Rear seat audio system controller The rear seat audio system can be oper- ated with the rear seat audio system con- troller.

CAUTION

Do not disassemble or modify the controller. It may cause an accident, fire or electric shock.

NOTICE

Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to ex- plode or leak.

188

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

BEFORE USING THE CONTROLLER (for new vehicle owners) A battery is already set in the control- ler with an insulating sheet, which pre- from being dis- vents charged. Before using the controller, remove the insulating sheet.

the battery

’03 4Runner_U (L/O 0305)

USING THE CONTROLLER To use the rear seat audio system con- troller, direct the signal output portion of the controller to the signal reception portion of the rear seat audio system display. The rear seat audio system controller can be operated when the ignition switch is in the “ACC” or “ON” position. The controller does not operate properly when the signal reception portion of the display to direct sunlight. Block the display from direct sunlight. Details of specific buttons, controls, and features see “CONTROLLER FEATURES” on page 191
in this Section.

is exposed

controller,

the

of

NOTICE

Observe the followings, otherwise the controller may be damaged. (cid:4) Do not drop or strongly knock the

controller against hard objects.

(cid:4) Do not sit on or place heavy ob-

jects on the controller.

189

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

NOTICE

Do not leave the controller exposed to high temperatures (such as on the instrument panel) for a long time, otherwise the controller may be dam- aged.

CONTROLLER HOLDER The controller can be stowed in the holder when it is not in use. The holder can be hooked on the back of the driv- er’s or front passenger’s seatback.

CAUTION

To reduce the chance of in case of an accident or a sudden stop while driving, stow the controller in the holder when it is not in use.

injury

190

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

” and “ ” and “

CONTROLLER FEATURES 1. “ 2. “ 3. “ON/SOURCE” button 4. “OFF” button

” (DISC/CH/PROG) buttons ” (TUNE/TRACK) buttons

’03 4Runner_U (L/O 0305)

1. “

” and “

” (DISC/CH/PROG) but-

tons

the “

” or “

Radio You can scan only the preset stations for the band of the front audio system. (For instructions, see “—Controls and features” on page 171 in this Section.) To scan the preset stations: ” (DISC/CH/PROG) Push button. The radio will tune in the next preset station up or down the band. The station frequency will appear on the dis- play. Cassette tape player Push ” (DISC/CH/PROG) ” or “ button to select the other side of a cas- sette indicates which ” indicates side is currently selected. (“ indicates the bottom the side.) the cassette Auto–reverse player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding.

tape. The display

feature: After

top side, “

the “

”

the “

” or “

” or “

” and “

” (TUNE/TRACK) but-

Compact disc player and DVD player With disc changer only— Use these buttons to select the disc you want to listen to. Push ” (DISC/CH/PROG) button until the number of the disc you want to listen to appears on the display. ” (TUNE/TRACK) buttons 2. “ Radio Use the “ ton to tune or seek. Tuning: Quickly push and release the “ ” (TUNE/TRACK) button briefly. Each time you push the button, the radio will step up or down to another frequency. If you push and hold the button and the radio will go into the seek mode. Seeking: ” (TUNE/ Push and hold the “ TRACK) button. The radio will seek up or down for a station of the nearest frequen- cy and will stop on reception. Each time you push the button, the stations will be searched automatically one after another.

” or “

” or “

191

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

” or “

Cassette tape player To fast forward a cassette tape, push and hold the “ ” (TUNE/TRACK) button until “FF” will appears on the display. Push and hold the “ ” (TUNE/TRACK) button until “REW” appears on the display to rewind a tape. Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one). ” (TUNE/TRACK) but- Push the “ ton. “FF 1” or “REW 1” will appear on the display. Next, push either side of the track button until the number on the display reaches the number of tracks you want to skip. If you push the button 10 times, the skip feature will be turned off. For the skip feature to work correctly a blank space of at least 3 seconds is con- sidered to be a start of a recording. When a beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play.

192

the “

” or “

In addition, the feature may not work well with some spoken, live, or classical re- cordings. Compact disc player and DVD player Use this button to skip up or down to a different track. ” (TUNE/TRACK) but- Push the “ ton until the number of the track or chap- ter you want to listen to appears on the display. If you want to return to the begin- ning of the current track or chapter, quick- ” (TUNE/TRACK) button ly push one time. ” (TUNE/ Push and hold the “ TRACK) button to fast forward or reverse within a disc. When you release the but- ton, the disc player will resume playing. With disc changer only— You can either scan the tracks or chap- ters on a specific disc or scan the first tracks or chapters of all the discs in the changer. Scanning the tracks or chapters on a disc: ” Quickly push and release the “ (TUNE/TRACK) button. “LOAD” will appear on the display and the player will scan all the tracks or chapters on the disc you are listening to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning.

” or “

” or “

” or “

Scanning the first tracks or chapters of all the discs in the changer: ” (TUNE/ Push and hold the “ TRACK) button. The player will scan the first track or chapter of the next disc. To stop scanning, release the button. If the player has scanned all the discs, it will stop scanning. 3. “ON/SOURCE” button Push the “ON/SOURCE” button to turn on the rear seat audio system. Use the “ON/SOURCE” button to select an audio mode when the rear seat audio sys- tem is on. Each time you push this but- ton, the system changes between the ra- dio, cassette player, compact disc player, compact disc changer and DVD changer. When you change the mode, the display indicates which mode is selected. When a cassette tape and discs are not loaded in the front audio system, only a radio mode can be selected in the rear seat audio system.

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

to

the

If you push the “ON/SOURCE” button on rear seat audio system controller to select the casette tape player mode or disc play- er mode in that case, a beep sounds from front audio system and “INVALID” flashes on the display for 6 seconds, and then the rear audio system returns the radio mode. If you push “ON/SOURCE” button while receiving an emergency broadcast, a beep sounds and “INVALID” appears on the display to indicate that no button can be operated. Radio AM mode When you select the AM mode, “AM” will appear on the display. FM mode When you select the FM mode, “FM1” or “FM2” will appear on the display. If the front audio system receives a traffic the rear seat announcement (TA) while audio system the radio mode, “TRAF” will flash on the display and the rear seat audio system will turn off. When the traffic an- nouncement (TA), the rear seat audio sys- tem cannot select the AM/FM mode.

front audio

receives a

in

is

’03 4Runner_U (L/O 0305)

“ERR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERR 4”: Over–current. Ask your Toyota dealer to inspect. “OPEN”: The compact disc changer lid of separate unit is open. Close the compact disc changer lid. If the malfunction still exists, take your vehicle to your Toyota dealer. 4. “OFF” button Push “OFF” button to turn off seat audio system.

the rear

Tape mode “TAPE” appears on the display while this mode is selected. Disc players Compact disc mode “CD” appears on the display while this mode is selected. The display shows the track, or track and disc number currently being played. DVD video disc mode “DVD” appears on the display while this mode is selected. The display shows the track or chapter, or track or chapter and disc number currently being played. Error messages If the player malfunctions, your audio sys- tem will display one of the five following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERR 1”: The disc may be dirty, damaged or (up–side down). Clean the disc and re–insert it. “ERR 2”: The compact disc changer of separate unit is empty. Insert a disc.

incorrectly

inserted

193

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

REPLACING CONTROLLER BATTERY For replacement, use a CR2025 lithium battery or equivalent.

CAUTION

Special care should be that small children do not swallow the re- moved battery or components.

taken

NOTICE

(cid:4) When replacing the battery, be care-

ful not to lose the components.

(cid:4) Replace only with the same or equivalent type of battery recom- mended by a Toyota dealer.

(cid:4) Dispose of used batteries according

to the local regulations.

194

Replace the battery by using the following procedures: 1. Pull

the case out while pushing

the

lock release button to the side.

2. Remove the discharged battery. 3. Put a new battery with the positive (+)

side up. Put in the case securely.

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

Car audio system operating hints

NOTICE

NOTICE

(cid:4) Make sure that the positive side of the controller battery is facing cor- rectly.

(cid:4) Do not replace the battery with wet

hands. Water may cause rust.

(cid:4) Do not touch or move any compo- nents inside of the controller, or it may interfere with proper operation. (cid:4) Be careful not to bend the electrode of the controller battery insertion and that dust or oil does not ad- here to the transmitter case.

(cid:4) Close the battery case securely.

After replacing the battery, check that the controller operates properly. If the control- ler still does not operate properly, contact your Toyota dealer.

To ensure correct audio system op- erations: (cid:4) Be careful not to spill beverages

over the audio system.

(cid:4) Do not put anything other than a cassette tape or compact disc into the slot.

(cid:4) The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the au- dio system. This does not indicate a malfunction.

RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio—it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. conditions change constantly as your vehicle moves.

In addition,

reception

signals are

Here are some common reception prob- lems that probably do not indicate a prob- lem with your radio: FM Fading and drifting stations—Generally, the effective range of FM is about 40 km (25
miles). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmit- ter. They are often accompanied by distor- tion. Multi–path—FM reflective, making it possible for two signals to reach your antenna at the same time. If this happens, the signals will cancel each oth- er out, causing a momentary flutter or loss of reception. Static and fluttering—These occur when signals are blocked by buildings, trees, or other large objects. Increasing the bass level may reduce static and fluttering. the FM signal you Station swapping—If are interrupted or weak- is ened, and there is another strong station nearby on the FM band, your radio may tune in the second station until the origi- nal signal can be picked up again.

listening to

195

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

they can

AM Fading—AM broadcasts are reflected by the upper atmosphere—especially at night. These reflected signals can interfere with those received directly from the radio sta- tion, causing the radio station to sound alternately strong and weak. Station interference—When a reflected sig- nal and a signal received directly from a radio station are very nearly the same frequency, interfere with each other, making it difficult to hear the broad- cast. Static—AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electri- cal motors. This results in static. CARING FOR YOUR CASSETTE PLAYER AND TAPES For the best performance for your cas- sette player and tapes: Clean the tape head and other parts regu- larly. (cid:2) A dirty

tape head or tape path can decrease sound quality and tangle your cassette to clean them is by using a cleaning tape. (A wet type is recommended.)

tapes. The easiest way

Use high–quality cassettes. (cid:2) Low–quality cassette tapes can cause many problems, including poor sound, inconsistent and constant auto–reversing. They can also get stuck or tangled in the cassette player.

playing

speed,

(cid:2) Do not use a cassette if it has been damaged or tangled or if its label is peeling off.

(cid:2) Do not leave a cassette in the player if you are not listening to it, especially if it is hot outside.

(cid:2) Store cassettes in their cases and out

of direct sunlight.

(cid:2) Avoid using cassettes with a total play- ing time longer than 100 minutes (50
minutes per side). The tape used in these cassettes is thin and could get stuck or tangled in the cassette player.

CARING FOR YOUR COMPACT DISC PLAYER AND DISCS (cid:2) Your compact disc player is intended for use with 12 cm (4.7 in.) discs only. (cid:2) Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.

(cid:2) Bumpy roads or other vibrations may to

cause your compact disc player skip.

(cid:2) If moisture gets into your compact disc player, you may not hear any sound even though your compact disc player appears the disc from the player and wait until it dries.

to be working. Remove

CAUTION

Compact disc players use an invisible laser beam which could cause hazard- ous if directed outside the unit. Be sure to operate the player correctly.

radiation exposure

196

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

(cid:2) Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. Copy–protected CD CD–R (CD–Recordable) CD–RW (CD–Re–writable) CD–ROM

Special shaped discs

Labeled discs

NOTICE

To prevent damage to the player or changer, do not use special shaped, low quality or labeled discs such as those shown in the illustrations.

Low quality discs

197

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

To clean a compact disc: Wipe it with a soft, lint–free cloth that has been damp- ened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint–free cloth. Do not use a conventional record cleaner or anti–static device.

Correct

Wrong

inserting

(cid:2) Handle compact discs carefully, espe- them. cially when you are them on the edge and do not Hold them. Avoid getting fingerprints bend on them, particularly on the shiny side. (cid:2) Dirt, scrapes, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.)

(cid:2) Remove discs from the compact disc player when you are not listening to them. Store them in their plastic cases away from moisture, heat, and direct sunlight.

198

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

’03 4Runner_U (L/O 0305)

SECTION 1– 8

OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Controls Air flow selector settings Operating tips Instrument panel and rear vents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200
207
207
210

199

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

Controls (without “DUAL” button)

’03 4Runner_U (L/O 0305)

1. Fan speed selector 2. “AUTO” button 3. Temperature selector 4. “A/C” button 5. Air flow selector 6. Air intake selector 7. “OFF” button

200

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

“AUTO” button For automatic operation of the air condi- tioning, push the “AUTO” button. An indi- cator light will illuminate to show that the automatic operation mode has been se- lected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on–off of the air conditioning according to the tem- perature. When you push the “AUTO” button with the air intake mode at FRESH, internal circulation may be applied for maximum cooling. You may use manual controls if you want to select your own settings. To turn off the automatic operation, push the “OFF” button. Fan speed selector Select the mode button you desire to ad- just the fan speed and push it. An indica- tor light will illuminate to show which fan speed mode is being selected. In automatic operation, you do not have to adjust the fan speed unless you desire another fan speed mode.

’03 4Runner_U (L/O 0305)

the the

the to decrease

temperature, push it, push

Temperature selector To increase “UP” side, “DOWN” side. “LO” appears when you adjust to maxi- mum cooling, and “HI” appears when you adjust to maximum warming. “OFF” button Push the “OFF” button to turn off the air conditioning system.

illuminate

to select

the buttons

to show which air

Air flow selector Push one of the vents used for air flow. An indicator light will flow mode is being selected. In automatic operation, you do not have to select the air flow unless you desire another air flow mode. 1. Panel—Air

the panel vents and rear vents.

instrument

flows

from

2. Bi–level—Air flows from both the floor vents, the instrument panel vents and rear vents.

3. Floor—Air flows mainly from the floor

vents.

201

2003 4RUNNER from Apr. ’03 Prod. (OM35820U)

4. Floor/Windshield—Air

flows mainly floor vents and windshield

the

from vents.

5. Windshield—Air flows mainly from the

windshield vents. When this button is pressed, air flows mainly from the windshield vents and turns on the defogging function with the purpose of clearing the front view. Pressing this button once again returns the air flow mode to the last one used. This button allows to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.

the air

intake

For details about air flow selector settings, see “Air flow selector settings” described below.

202

’03 4Runner_U (L/O 0305)

“A/C” button To turn on the air conditioning, push the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning