displayed. If you input the correct pass key, is displayed and the registration procedure is finished. If you input an incorrect pass key, “FAILED” is displayed and the registration procedure was not successful.
“PAIRED”
NOTE When the ignition switch is turned to the “Acc” or “ON” position, the regis- tered cell phone will be automatically connected to the system. ! Menu list of the Hands-free system Turn the “TUNE/TRACK/CH” dial to select a menu, and then press the dial to enter the selected menu.
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (224,1)
5-46 Audio
First menu
Second menu
Third menu
Details
Page
PHONE BOOK* ADD ENTRY
BY VOICE
BY PHONE
Adding a new number by voice
Adding a new number by cell phone
MANUAL INPUT
Adding a new number by inputting manually
CALL HISTORY
Adding a new number from the call history
GO BACK
LIST NAMES
CHANGE NAME
SET SPD DIAL/SET SPEED DIAL
DELETE ENTRY
DEL SPD DIAL/DE- LETE SPEED DIAL
GO BACK
DIAL
STORE
DELETE
GO BACK
REDIAL
CALLBACK
DIAL
STORE
DELETE
GO BACK
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Showing the list of the names registered in the phonebook
Changing a name registered in the phonebook
Registering a speed dial
Deleting phonebook data
Deleting a registered speed dial
Redialing
Adding a new number stored in the outgoing call history memory
Deleting a number stored in the outgoing call history memory
5-51
Dialing a number stored in the incoming call history memory
5-52
Adding a new number stored in the incoming call history memory
5-50
Deleting a number stored in the incoming call history memory 5-52
5-49
5-49
5-49
5-50
5-50
5-51
5-51
5-51
5-51
5-52
5-50
*: If a cell phone is not registered, the menu described in the chart is not indicated.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (225,1)
Audio 5-47
First menu
Second menu
Third menu
Details
Page
SETUP
SECURITY
SET PIN
PHBK LOCK*/ PHONE BOOK LOCK*
PHBK UNLOCK*/ PHONE BOOK UN- LOCK*
GO BACK
Setting a PIN code
Locking the phonebook
Unlocking the phonebook
PHONE SETUP
PAIR PHONE
Registering a new cell phone
SELECT PHONE
Selecting a cell phone to be used
CHANGE NAME
Changing the registered name of the cell phone
LIST PHONES
Showing the list of the registered cell phones
SET PASSKEY
Changing the pass key
DELETE
GO BACK
Deleting the registered cell phone
SYSTEM SETUP
GUIDANCE VOL/ GUIDANCE VOLUME Setting the volume of the voice guidance INITIALIZE
Initialization
SEL LANGUAGE/SE- LECT LANGUAGE
GO BACK
—
GO BACK
Selecting the language (using the Hands-free system)
*: If a PIN code is not registered, the menu described in the chart is not available.
5-53
5-53
5-53
5-45
5-54
5-54
5-54
5-54
5-55
5-55
5-55
5-55
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
5-48 Audio
! Voice command system
1) OFF hook switch 2) ON hook switch 3)
Talk switch
To turn on the voice command system,
press the talk switch
briefly. To turn off
the voice command system, wait
for 5
seconds without using the voice command
system.
The commands available for the voice command system are listed in the follow- ing chart.
Command
English
Français
10
11
12
13
14
15
16
17
18
19
0 (zero, oh)
1 (one)
2 (two)
3 (three)
4 (four)
5 (five)
6 (six)
7 (seven)
8 (eight)
9 (nine)
* (star)
# (pound)
+ (plus)
callback
redial
dial by number
0 (zéro)
1 (un)
2 (deux)
3 (trois)
4 (quatre)
5 (cinq)
6 (six)
7 (sept)
8 (huit)
9 (neuf)
* (étoile)
# (carré, dièse)
+ (plus)
rappel
recomposer
composer par nu- méro
dial by name
composer par nom
phonebook
setup
registre
réglages
Black plate (226,1)
phone book add entry
ajouter l’entrée dans le registre
phone book change name
phone book delete entry
phone book list names
phone book set speed dial
phone book delete speed dial
modifier le nom dans le registre supprimer l’entrée du registre
lister les noms du registre
configurer compo- sition abrégée pour le registre
supprimer compo- sition abrégée pour le registre
phone book unlock déverrouiller le re-
gistre
31 mute
cancel
help
repeat
go back
dial
previous
delete
store
confirm
annuler
aide
répéter
retourner
sourdine
composer
précédent
supprimer
enregistrer
confirmer
phone setup
réglages du télé- phone
20
21
22
23
24
25
26
27
28
29
30
32
33
34
35
36
37
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
security
sécurité
pair phone
jumeler le télé- phone
change name
modifier le nom
38
39
40
41
select phone
42
list phones
43
44
45
46
47
48
49
50
51
52
53
54
55
set pass key
add entry
delete entry
delete speed dial
by voice
by phone
call history
set speed dial
incoming
outgoing
list names
set PIN
phone book lock
sélectionner le tél- éphone
lister les télé- phones
configurer le passe-partout ajouter l’entrée supprimer l’entrée supprimer compo- sition abrégée
vocalement
par téléphone historique d’appels configurer compo- sition abrégée
entrant
sortant
lister les noms
configurer NIP verrouiller le regis- tre
! Updating phonebook data NOTE The maximum number of phonebook entries that can be registered in the phonebook is 50. ! Registering by voice 1. Select the “BY VOICE” menu. 2. Press the talk switch 3. Say the phone number to be regis- tered. 4. Select the “CONFIRM” menu. 5. Perform either of the following proce- dures.
– Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial. – Press the talk switch
to be
6. Say the name (voice tag) registered. the “CONFIRM” menu. Then 7. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-50.
! Registering by phone 1. Select the “BY PHONE” menu. 2. Select “TRANSFER” is displayed.
the “CONFIRM” menu. Then
Black plate (227,1)
Audio 5-49
3. Transfer the data from the cell phone. For details about transferring the data, refer to the Owner’s Manual of the cell phone. 4. Perform either of the following proce- dures.
– Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial. – Press the talk switch
to be
5. Say the name (voice tag) registered. the “CONFIRM” menu. Then 6. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-50.
! Registering by inputting manually 1. Select the “MANUAL INPUT” menu by operating the “TUNE/TRACK/CH” dial. 2. tered. 3. Perform either of the following proce- dures.
Input the phone number to be regis-
– Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial. – Press the talk switch
4. Say the name (voice tag) registered.
to be
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
5-50 Audio
the “CONFIRM” menu. Then 5. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-50.
NOTE While inputting the phone numbers, if “GO BACK” (type C audio)/“BS” (type D audio) is chosen using the “TUNE/ TRACK/CH” dial, the character that was input last is deleted. ! Registering from call history 1. Select the “CALL HISTORY” menu. 2. Select “OUTGOING” or “INCOMING” by operating the “TUNE/TRACK/CH” dial. 3. Select the phone number by operating the “TUNE/TRACK/CH” dial. 4. Perform either of the following proce- dures.
– Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial. – Press the talk switch
to be
5. Say the name (voice tag) registered. the “CONFIRM” menu. Then 6. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial”
F5-50.
! Registering from redial 1. Select the “REDIAL” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “STORE” menu. 4. Select the “CONFIRM” menu. 5. Perform either of the following proce- dures.
– Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial. – Press the talk switch
to be
6. Say the name (voice tag) registered. the “CONFIRM” menu. Then 7. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-50.
! Registering from call back 1. Select the “CALL BACK” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “STORE” menu. 4. Select the “CONFIRM” menu. 5. Perform either of the following proce- dures.
Black plate (228,1)
– Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial. – Press the talk switch
to be
6. Say the name (voice tag) registered. the “CONFIRM” menu. Then 7. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-50.
! Registering speed dial 1. After registering phonebook data, se- lect the “SPEED DIAL” menu. 2. Press the preset button (from
to ) to which you want to register the
phone number.
NOTE If the number to be used is already registered in speed dial, “OVER- WRITE?” will be displayed. ! List names function The voice tags registered in the phone- book are spoken by using the list names function. To use the list names function, perform the following procedure. 1. Select the “LIST NAMES” menu. 2. Choose the registered data by per-
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
forming either of the following procedures.
– Press the talk switch – Operate the “TUNE/TRACK/CH” dial.
3. After “SELECTED” is displayed, you can choose the following menus. . “DIAL” to make a phone call . “CHANGE NAME” to change the name (voice tag) . “SET SPD DIAL”/“SET SPEED DIAL” to set the speed dial . “DELETE ENTRY” to delete the name (voice tag) from the phonebook . “GO BACK” to go back to the menu mode NOTE . After “LIST NAMES” is selected, if the OFF hook switch is pushed, the selected number is called. . After “LIST NAMES” is selected, if no operation is performed, the mem- ories are displayed and voice tags are spoken. After all memories/voice tags are displayed/spoken, “END OF LIST” is displayed and the mode changes to the “PHONE BOOK” menu mode. ! Changing voice tag 1. Select the “CHANGE NAME” menu. 2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the voice tag.
and say
the “CONFIRM” menu (only 3. Select after saying the voice tag). Then the selected phone number/name is dis- played. 4. Press the talk switch 5. Say the new voice tag. 6. Select “CHANGED” is displayed.
the “CONFIRM” menu. Then
the “SET SPD DIAL”/“SET
! Set speed dial 1. Select SPEED DIAL” menu. 2. Select the phone number by perform- ing either of the following procedures.
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the voice tag.
and say
the “CONFIRM” menu (only
3. Select after saying the voice tag). 4. Press the preset button (from
to ) in which you want to register the
phone number.
Black plate (229,1)
Audio 5-51
! Deleting the phonebook data 1. Select the “DELETE ENTRY” menu. 2. Select the phone number by perform- ing either of the following procedures.
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the voice tag.
and say
the “CONFIRM” menu. Then 3. Select “DELETED” is displayed and the selected phonebook data is deleted.
! Deleting the speed dial 1. Select the “DEL SPD DIAL”/“DELETE SPEED DIAL” menu. 2. Press the preset button (from
to to delete the
) in which you want
speed dial. the “CONFIRM” menu. Then 3. Select “DELETED” is displayed and the selected speed dial is deleted.
! Deleting the redial data 1. Select the “REDIAL” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “DELETE” menu. the “CONFIRM” menu. Then 4. Select “DELETED” is displayed and the selected redial data is deleted.
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
5-52 Audio
! Deleting the callback data 1. Select the “CALLBACK” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “DELETE” menu. the “CONFIRM” menu. Then 4. Select “DELETED” is displayed and the selected callback data is deleted.
! Making a phone call ! Making a phone call by saying name 1. Select the top menu (phone menu). 2. Press the talk switch 3. Say “DIAL BY NAME”. 4. Press the talk switch 5. Say the desired name (voice tag) to be called. 6. Select the “DIAL” menu.
again.
! Making a phone call by saying
number
1. Select the top menu (phone menu). 2. Press the talk switch 3. Say “DIAL BY NUMBER”. 4. Press the talk switch 5. Say the desired phone number to be called. 6. Select the “DIAL” menu.
again.
! Making a phone call from speed dial It is possible to select a phone number from speed dial registered with the in- vehicle equipment to make a phone call. 1. Select the top menu (phone menu). 2. Press the preset button (from
to ) in which the desired number is
registered. 3. Press the OFF hook switch
NOTE When a preset button for which num- bers are not registered is pressed, an error message is indicated on the audio screen. ! Redial 1. Select the “REDIAL” menu. 2. Press the OFF hook switch 3. Select the desired number by turning the “TUNE/TRACK/CH” dial. 4. Perform either of the following proce- dures.
– Press the OFF hook switch – Press the “TUNE/TRACK/CH” dial, then select the “DIAL” menu.
! Callback 1. Select the “CALL BACK” menu. 2. Press the OFF hook switch
Black plate (230,1)
3. Select the desired number by turning the “TUNE/TRACK/CH” dial. 4. Perform either of the following proce- dures.
– Press the OFF hook switch – Press the “TUNE/TRACK/CH” dial, then select the “DIAL” menu.
! Making a phone call from list name It is possible to select a phone number from the list name registered with the in- vehicle equipment to make a phone call. For details, refer to “List names function” F5-50. ! Top redial 1. Select the top menu (phone menu). 2. Press the OFF hook switch load the outgoing call history. 3. Select the “DIAL” menu.
and
! Taking a phone call and declining
an incoming call
To take a phone call: Press the OFF hook switch To put an incoming call on hold: Press the ON hook switch To decline an incoming call: Press and hold the ON hook switch for more than 1.5 seconds.
briefly.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
! Ending a call Press the ON hook switch ! Volume control
You can adjust the phone call volume, the voice volume and the voice guidance volume. Refer to “Volume control buttons” F5-39. ! Adjustable level of each volume
Volume
Phone call
Voice
Voice guidance
Range
0 to 14
0 to 14
0 to 6
Initial setting
& Bluetooth® setting ! Security setting After selecting the “SECURITY” menu, perform the following procedures. ! Setting PIN code The PIN code is a 4-digit number and is used when locking the phonebook. 1. Select “CURRENT PIN?” is displayed. 2. ing either of the following procedures.
Input the current PIN code by perform-
the “SET PIN” menu. Then
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the number.
and say
3. Select the “CONFIRM” menu. 4. either of the following procedures.
Input the new PIN code by performing
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the number.
and say
5. Select the “CONFIRM” menu.
! Locking the phonebook the “PHBK LOCK”/“PHONE- 1. Select BOOK LOCK” menu. Then “CURRENT PIN?” is displayed. 2.
the PIN code by performing
Input
Black plate (231,1)
Audio 5-53
either of the following procedures.
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the number.
and say
the “CONFIRM” menu.
3. Select the inputted PIN code is correct, “LOCKED” is displayed and the phonebook is locked.
If
NOTE While the phonebook is locked, if the operation restricted menu is selected, “PHBK LOCK” is displayed. ! Unlocking the phonebook 1. Select the “PHBK UNLOCK”/“PHONE- BOOK UNLOCK” menu. Then “CUR- RENT PIN?” is displayed. NOTE If the phonebook is not locked, “UN- LOCK” is displayed and the mode changes to the security mode. 2. either of the following procedures.
the PIN code by performing
Input
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the number.
and say
the “CONFIRM” menu. 3. Select inputted PIN code is correct,
If the “UN- – CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 7/ 5
5-54 Audio
LOCKED” is displayed and the phone- book is unlocked.
! Changing the voice tag of the cell
phone
! Phone setup After selecting the “PHONE SETUP” menu, perform the following procedures. ! Setting pair phone Refer to “Preparation for using the Hands- free system” F5-45. ! Selecting phone To select the registered cell phone for connecting to the in-vehicle equipment, perform the following procedure. 1. Select the “SELECT PHONE” menu. If no cell phones are registered, “EMPTY” is displayed and the mode changes to the “PHONE SETUP” mode. 2. Select either of the following procedures.
the cell phone by performing
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the voice tag.
and say
the “CONFIRM” menu (only 3. Select after saying the voice tag). “SELECTED” is displayed, the selected cell phone is connected to the in-vehicle equipment and the mode changes to the “PHONE SET- UP” mode.
1. Select the “CHANGE NAME” menu. If no cell phones are registered, “EMPTY” is displayed and the mode changes to the “PHONE SETUP” mode. 2. Select either of the following procedures.
the cell phone by performing
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the voice tag.
and say
3. Register the voice tag. For details, refer to “Preparation for using the Hands- free system” F5-45.
! List phones function The cell phone voice tags saved in the cell phone list are spoken by using the list phones function. 1. Select the “LIST PHONES” menu. If no cell phones are registered, “EMPTY” is displayed and the mode changes to the “PHONE SETUP” mode. 2. Registered cell phones are displayed on the saved side. While displayed, if the “TUNE/TRACK/CH” dial the next registered cell phone is displayed. Press the ON hook button to close the Hands-free menu. 3. Select a cell phone by performing
is turned,
Black plate (232,1)
either of the following procedures.
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch
to connect
4. After “SELECTED” is displayed, select the following menus. . “SELECT PHONE” selected cell phone . “CHANGE NAME” to change the voice tag . “DELETE” to delete the selected cell phone from the list . “GO BACK” to go back to the “PHONE SETUP” mode
the
the “SET PASSKEY” menu. the currently set passkey is dis-
! Setting passkey 1. Select After played, a new passkey can be entered. 2. either of the following procedures.
Input the new passkey by performing
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the passkey.
and say
3. Select the “CONFIRM” menu. The new passkey is displayed, the passkey is changed and the mode changes to the “PHONE SETUP” mode.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
! Deleting registered cell phone from
the list
1. Select the “DELETE” menu. 2. Select a cell phone to be deleted by performing either of the following proce- dures.
– Operate the “TUNE/TRACK/CH” dial. – Press the talk switch the voice tag.
and say
the “CONFIRM” menu.
“DE- 3. Select LETED” is displayed, the data is deleted and the mode changes to the “PHONE SETUP” mode.
! System setup After selecting the “SYSTEM SETUP” menu, perform the following procedures. You can select the following menus only by operating the “TUNE/TRACK/CH” dial. ! Setting guidance volume To set the guidance volume, perform the following procedure. 1. Select DANCE VOLUME” menu. 2. Set the guidance volume by operating the “TUNE/TRACK/CH” dial.
the “GUIDANCE VOL”/“GUI-
! Initializing the registered data To initialize the registered data, perform the following procedure. 1. Select the “INITIALIZE” menu. the “CONFIRM” menu. First 2. Select “PLEASE WAIT”, then “INITIALIZED” is displayed. The registered data is initia- lized and the mode changes to the last mode.
the language, perform the
! Selecting language To select following procedure. 1. Select LECT LANGUAGE” menu. 2. Select the desired language by oper- ating the “TUNE/TRACK/CH” dial.
the “SEL LANGUAGE”/“SE-
Black plate (233,1)
Audio 5-55
Screensaver (type D audio)
If the following operations are not per- formed for more than 30 seconds while the audio is ON, the screensaver will be displayed. . Operate any button or dial . Shift the shift lever/select lever to the “R” position . A cell phone registered in the Hands- free system is called
If one of the following operations is performed, the screensaver turns off and the operation screen will be displayed. . A cell phone registered in the Hands- free system is called . The update for satellite radio starts. . The update for satellite radio stops.
the following operations is the screensaver turns off. the operation screen will not
If one of performed, However, be displayed. . Operate any button or any dial in a condition other than the following condi- tions
button while a than the CD mode is
– Pressing the mode other selected – Pressing the volume control buttons of the audio control buttons
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
5-56 Audio
– Pressing the power switch
. Insert a CD (except reloading a CD) . Connect a USB storage device or an iPod® NOTE The screensaver is not displayed under the following conditions. . While the ignition switch is in the “LOCK” position . While the audio is OFF . While the screen is OFF . While talking on a cell phone regis- tered in the Hands-free system . While setting the audio . While seek tuning, PTY group tun- ing, scan tuning or auto-storing while the FM/AM radio is on. . While in the category search mode of the satellite radio . While the rear view camera is being used
& Downloading picture Perform the following procedure to down- load a picture to be used as screensaver. 1. Connect a USB storage device. Refer to “Connecting USB storage device / iPod®” F5-33. 2. Select the “Picture Download” menu by operating the “TUNE/TRACK/CH” dial.
For details, refer to “Audio settings (type D audio)” F5-10. 3. Select operating the “TUNE/TRACK/CH” dial. 4. Select “Wide” or “Normal” by operating the “TUNE/TRACK/CH” dial.
the preferred JPEG file by
NOTE . JPEG files that are 10 MB or less can be saved. . If the file name is too long, the file may not be saved. . Up to two JPEG files can be saved in the in-vehicle equipment. . If the aspect ratio of the displayed picture is 16:9, “Wide” cannot be selected. . If the aspect ratio of the displayed picture is 4:3, “Normal” cannot be selected. & Selecting picture the “Picture Select” menu by 1. Select operating the “TUNE/TRACK/CH” dial. For details, refer to “Audio settings (type D audio)” F5-10. If no pictures are saved, “No Data” is displayed. Press the button to return to the “Screen Saver” mode. 2. Select the preferred picture by operat- ing the “TUNE/TRACK/CH” dial.
Black plate (234,1)
& Erasing picture the “Picture Erase” menu by 1. Select operating the “TUNE/TRACK/CH” dial. For details, refer to “Audio settings (type D audio)” F5-10. If no pictures are saved, “No Data” is displayed. Press the button to return to the “Screen Saver” mode. 2. Select the preferred picture by operat- ing the “TUNE/TRACK/CH” dial. 3. Operate the “TUNE/TRACK/CH” dial to select “OK” to erase the picture or “Cancel” to cancel the operation.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (11,1)
Interior equipment
Ashtray (if equipped)......................................... Floor mat ............................................................ Shopping bag hook ........................................... Coat hook........................................................... Cargo area cover (dealer option)...................... Using the cover ................................................. To remove the cover .......................................... To install the cover ............................................ Cargo tie-down hooks ....................................... Under-floor storage compartment (if
equipped) ........................................................ Rear view camera (if equipped) ........................ How to use the rear view camera ....................... Viewing range on the screen.............................. Help line............................................................
6-11
6-12
6-13
6-13
6-14
6-14
6-14
6-15
6-15
6-16
6-17
6-18
6-18
6-19
Interior lights ....................................................... Dome light .......................................................... Cargo area light .................................................. Map light............................................................. Sun visors ........................................................... Vanity mirror ....................................................... Storage compartment ......................................... Glove box ........................................................... Center console.................................................... Overhead console ............................................... Rear seat center table (if equipped) ..................... Coin tray............................................................. Cup holders ......................................................... Front passenger’s cup holder .............................. Rear passenger’s cup holder (if equipped) ........... Bottle holders ...................................................... Accessory power outlets....................................
6-2
6-2
6-3
6-3
6-4
6-4
6-5
6-5
6-5
6-6
6-7
6-7
6-8
6-8
6-8
6-9
6-9
Cigarette lighter (dealer option) .......................... 6-10
北米Model "A8170BE-A" EDITED: 2011/ 6/ 6
6-2 Interior equipment
Interior lights
When leaving your vehicle, make sure the lights are turned off to avoid battery discharge.
& Dome light
Type A
Type B 1) ON 2) DOOR 3) OFF
The dome light switch has the following three positions.
ON: The light remains on continuously. OFF: The light remains off. DOOR: The dome light illuminates auto- matically in the following cases. . Any of the doors or the rear gate is opened. . The doors or the rear gate are un- locked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.
Black plate (238,1)
The automatically illuminated dome light remains on for several seconds and then gradually turns off after all doors and the rear gate are closed.
While the light is illuminated, if any of the following operations are performed, the dome light turns off immediately. . The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position. . All doors and the rear gate are locked using the remote keyless entry transmitter.
The setting of the period for which the light remains on (OFF delay timer) can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
& Cargo area light
& Map light
! Door interlock switch
Black plate (239,1)
Interior equipment 6-3
1) DOOR 2) OFF 3) ON
The cargo area light switch has the following positions.
DOOR: The light illuminates when the rear gate is opened and turns off when the rear gate is closed. OFF: The light remains off. ON: The light remains on continuously.
1) Map light switch (lens)
1) Door interlock switch
To turn on the map light, push the lens. To turn it off, push the lens again.
When leaving the vehicle, make sure the lights are turned off to avoid battery discharge.
Although the map light switches (lenses) are in the OFF position (manually off), the map lights can be set to illuminate auto- matically in conjunction with a door open- ing, etc. by use of interlock switch. The door interlock switch has the following positions.
the door
OFF: The map lights do not illuminate automatically in conjunction with a door opening. However, the lights can be turned on manually by pushing the map light switches (lenses). DOOR: The map lights illuminate auto- matically in the following cases. . Any of the doors other than the rear gate is opened. (The map lights do not – CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (240,1)
6-4 Interior equipment
illuminate when only the rear gate is opened.) . The doors are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.
The automatically illuminated map lights remain on for several seconds and then gradually turn off after all doors are closed. While the lights are on, if any of the following operations are performed, the map lights turn off immediately. . The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position. . All doors and the rear gate are locked using the remote keyless entry transmitter.
the period for which the The setting of lights remain on (OFF delay timer) can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
Sun visors
& Vanity mirror
CAUTION
Keep the vanity mirror cover closed while the car is being driven to avoid glare.
To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways.
To use the vanity mirror, swing down the sun visor and open the vanity mirror cover.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Storage compartment
& Glove box
To use as an armrest:
Black plate (241,1)
Interior equipment 6-5
CAUTION
. Always keep the storage com- partment closed while driving to reduce the risk of injury in the event of a sudden stop or an accident.
. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.
Lock
1) 2) Unlock
1. Tip the console top forward from its vertical position.
To open the glove box, pull the handle. To close it, push the lid firmly upward.
To lock the glove box, insert the key and turn it clockwise. To unlock the glove box, insert the key and turn it counterclockwise.
& Center console The center console box provides a sto- rage space. the the top of console can be used as an armrest.
In addition,
2. Push the armrest part of the console top forward to the desired position. Adjust to suit your the position of – CONTINUED –
the armrest
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
6-6 Interior equipment
driving position. Make sure the armrest is securely retained. To return the console top to the vertical position, raise the console top.
CAUTION
Do not step or sit on the armrest, and do not place heavy objects on it. The armrest could break, and you could get hurt.
To use as storage space:
Raise the console top to the vertical position.
Black plate (242,1)
& Overhead console
1) Pocket console
The pocket console can be used to store small items.
CAUTION
Be careful not to trap your hand between the console top and con- sole box when raising and tipping the console top.
To open the console, push on the console lid lightly and the lid will automatically open.
CAUTION
When your vehicle is in the sun or on a warm day, the inside of the overhead console heats up. Avoid storing plastic or other heat-vulner- able or flammable articles such as a lighter in the overhead console.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (243,1)
Interior equipment 6-7
& Rear seat center table (if
equipped)
cup holders.
CAUTION
& Coin tray
. Do not step or sit on the rear seat center table, and do not place heavy objects on it. The rear seat center table could break, and you could get hurt.
. When pulling out or returning the rear seat center table, make sure not to pinch fingers or other body parts.
. Do not use the rear seat center
table while driving.
. When folding down the rear seat- back, return the rear seat center table.
A coin tray is built in the center console.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
To use the rear seat center table, pull the strap up.
The rear seat center table can be used as a storage space and as rear passenger’s
Black plate (244,1)
& Rear passenger’s cup holder
(if equipped)
6-8 Interior equipment
Cup holders
CAUTION
Take care to avoid spills. Beverages, if hot, might burn you or your passengers. Spilled beverages may also damage upholstery, carpets or audio equipment.
& Front passenger’s cup holder
CAUTION
A dual cup holder is built in the center console, beside the parking brake lever.
Do not pick up a cup from the cup holder or put a cup in the holder while you are driving, as this may distract you and lead to an accident.
A dual cup holder is located on the rear seat center table.
The cup holder rear partition can be removed and placed on the front partition. This space can be used to store small items.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Bottle holders
trim can be used to hold beverage bottles and other items.
Accessory power outlets
Black plate (245,1)
Interior equipment 6-9
CAUTION
. Do not pick up a bottle from the bottle holder or put a bottle in the holder while you are driving, as this may distract you and lead to an accident.
. When placing a beverage in a door pocket, make sure it is capped. Otherwise, the beverage could spill when opening/closing the door or while driving and, if the beverage is hot, it could scald you.
The door pocket equipped on each door
Power outlet below the climate controls
Power outlet in the center console
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
6-10 Interior equipment
Power outlet in the cargo area
(12V DC)
Accessory power outlets are provided below the climate controls, in the center console and in the cargo area. Electrical power from the battery is available at any of the outlets when the ignition switch is in either the “Acc” or “ON” position. You can use an electrical appliance by connecting it to an outlet. The maximum power rating of an appli- ance that can be connected is 120W. Do not use an appliance which exceeds the indicated wattage for each outlet. When using appliances connected to two or more outlets simultaneously, the total power consumed by them must not exceed 120W.
CAUTION
. Do not attempt to use a cigarette lighter plug in the accessory power outlets.
. Do not place any foreign objects, especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Al- ways put the cap on the acces- sory power outlet when it is not in use.
. Use only electrical appliances which are designed for 12V DC. The maximum power rating of an appliance that can be connected is 120W. Do not use an appliance which exceeds the indicated wat- tage for each outlet. When using appliances con- nected to two or more outlets simultaneously, the total power consumed by them must not exceed 120W. Overloading the accessory power outlet can cause a short circuit. Do not use double adapters.
Black plate (246,1)
. If the plug on your electric appli- ance is either too loose or too tight for the accessory power outlet, this can result in a poor contact or cause the plug to get stuck. Only use plugs that fit properly.
. Use of an electric appliance in the accessory power outlet for a long period of time while the engine is not running can cause battery discharge.
. Before driving your vehicle, make sure that the plug and the cord on your electrical appliance will not interfere with your shifting gears and operating the accel- erator and brake pedals. If they do, do not use the electrical appliance while driving.
& Cigarette lighter (dealer op-
tion)
A cigarette lighter may be installed in place of an accessory power outlet. The cigarette lighter assembly is available from your SUBARU dealer. The cigarette lighter operates only when the ignition switch is in the “ON” or “Acc” position.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Doing so may cause the plug to stick and overheat, creating a potential fire hazard.
To use the cigarette lighter, push in the knob and wait a few moments. It will automatically spring up when ready for use.
WARNING
To avoid being burned, never grasp the lighter by the end with the heating element. Doing so could result in injury and could also damage the heating element.
CAUTION
. Do not hold the lighter pushed in,
because it will overheat.
. Do not use non-genuine cigarette lighter plugs in the socket. Doing so may cause a short-circuit and overheating, resulting in a fire.
. If the socket is ever used for a plug-in accessory such as a cell phone, that may damage the portion of the socket’s internal mechanism that causes a cigar- ette lighter plug to “pop out” after is heated. Therefore, do not place a cigarette lighter plug in a sock- et that has been used, even once, to power a plug-in accessory.
its heating element
Black plate (247,1)
Interior equipment 6-11
Ashtray (if equipped)
CAUTION
. Do not use ashtrays as waste receptacles or leave a lighted cigarette in an ashtray. This could cause a fire.
. Always extinguish matches and cigarettes before putting them into the ashtray, and then close the ashtray securely. If you keep the ashtray open, the fire on the cigarette tip may spread to an- other cigarette butt and start a fire.
. Do not put flammable material in
the ashtray.
. Do not leave a lot of cigarette
butts in the ashtray.
– CONTINUED –
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
6-12 Interior equipment
Floor mat
The portable ashtray can be installed in each cup holder. For the locations of the cup holders, refer to “Cup holders” F6-8. When using the ashtray, open the lid of the ashtray. When removing the ashtray from a cup holder, pull the ashtray upwards. Fully close the lid after using the ashtray to help reduce residual smoke. NOTE Particles of ash and tobacco will accu- mulate around the hinges of the ash- tray’s inner lid. Clean them off using a toothbrush or another narrow-ended implement.
Retaining pins are located on the driver’s side floor. The driver’s floor mat should be properly secured using the built-in grommets, by placing the grommets over the pins and pushing them downward.
Black plate (248,1)
CAUTION
If the floor mat slips forward and interferes with the movement of the pedals during driving, it could cause an accident. Observe the following precautions to prevent the floor mat from slipping forward. . Be sure to use a genuine SUBARU floor mat or an equiva- lent designed with grommets in the correct locations.
. Make sure that the driver’s floor mat is placed back in its proper location and is correctly secured on its retaining pins.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (249,1)
Interior equipment 6-13
. Do not use more than one floor
mat.
Shopping bag hook
Coat hook
CAUTION
Do not hang items on the shopping bag hook that weigh 6 lbs (3 kg) or more.
A shopping bag hook is attached to each side of the cargo area.
A coat hook is attached to each side of the cargo area.
CAUTION
. Never hang anything on the coat hook that might obstruct the driver’s view or that could cause injury in sudden stops or in a collision.
. Do not hang items on the coat hook that weigh 6 lbs (3 kg) or more.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
6-14 Interior equipment
Cargo area cover (dealer op- tion)
The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo.
& Using the cover
To extend the cover, pull the end of the cover out of the housing, then insert its hooks into the catches as shown. To rewind it, unhook it from the catches and it will rewind automatically. You should hold the cover and guide it back into the cover housing while it is rewinding.
the front cover behind the rear
Install seatback.
WARNING
Do not place anything on the ex- tended cover. Putting excessive weight on the extended cover can break it and an object on the cover could tumble forward in the event of a sudden stop or collision. This could cause serious injury.
CAUTION
. Be careful not to scratch the rear gate stays while extending and rewinding the cover. Scratches on the stays could cause leakage
Black plate (250,1)
of gas from the stays, which may result in their inability to hold the rear gate open.
. If the vehicle is equipped with a reclining rear seatback feature, when reclining the rear seatback, move the front cover backward so that the cover is not damaged.
& To remove the cover 1. Rewind the cover.
2. Push the button that is next to the right end of the cover housing. 3. Take it off the retainer.
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
Black plate (251,1)
Interior equipment 6-15
& To install the cover
ends of recesses of the retainers.
the cover housing into the
Cargo tie-down hooks
WARNING
Make sure to install the cover hous- ing securely. Otherwise, there is a risk of being injured.
1. Remove the cover of the retainers by prying on the edge with a flat-head screwdriver.
2.
Insert the projections located on both
The cargo area is equipped with four tie- down hooks so that cargo can be secured with a cargo net or ropes. When using the tie-down hooks, turn them down out of the storing recesses. When