Download PDF Manual


c Keep the tray lid closed while driving to help prevent contents from becoming projectiles causing injury in an accident or during a sudden stop.


If so equipped


LIC0721


LIC0703


INSTRUMENT PANEL STORAGE (if so equipped) To open the storage tray, push upward and re- lease. The storage tray will automatically move to the open position.


Instruments and controls 2-35


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


LIC0694


COVERED STORAGE BOX (if so equipped) Push the bottom center of the lid to open.


LIC0748
GROCERY HOOKS (if so equipped) The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag.


CAUTION


Do not apply a total load of more than 20
lbs (9 kg) to a single grocery hook.


2-36 Instruments and controls


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


CARGO NET (if so equipped)


WARNING


c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.


c Be sure to secure all four hooks into the retainers. The cargo restrained in the net must not exceed 30 lbs. (13.6 kg) or the net may not stay secured.


CAUTION


Do not strike the navigation system map DVD-ROM player (if so equipped) while loading the trunk and do not place heavy objects on the player. Doing so could cause improper operation or damage the system.


The cargo net helps keep packages in the cargo area from moving around while the vehicle is in motion.


WIC0733


Instruments and controls 2-37


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


WINDOWS


POWER WINDOWS


WARNING


c Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.


c Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become trapped in a window. Unattended chil- dren could become involved in serious accidents.


The power windows operate when the ignition switch is in the ON position, or for about 45
seconds after the ignition switch is turned to the OFF position. If the driver(cid:146)s or passenger(cid:146)s door is opened during this period of about 45 sec- onds, power to the windows is canceled.


LIC0802
To install the cargo net, attach the net to the retainers. To remove the cargo net, detach the net from the cargo net retainers.


2-38 Instruments and controls


LIC0705


Power door lock switch


1. 2. Window lock button 3.


Front passenger side (automatic switch, if so equipped) Right rear passenger side Left rear passenger side Driver side automatic switch


4. 5. 6. Driver(cid:146)s side power window switch The driver(cid:146)s side control panel is equipped with switches to open or close all of the windows. To open a window, push the switch and hold it down. To close a window, pull the switch up. To stop the opening or closing function at any time, simply release the switch.


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


LIC0695
Front passenger power window switch The passenger window switch operates only the corresponding passenger window. To open the window, push the switch and hold it down s1 . To close the window, pull the switch up s2 .


LIC0718


LIC0717


Rear power window switch The rear passenger window switches open or close only the corresponding passenger window. To open the window, push the switch and hold it down s1 . To close the window, pull the switch up s2 . Locking passengers(cid:146) windows When the window lock button is depressed, only the driver side window can be opened or closed. Push it again to cancel the window lock function.


Automatic operation To fully open a window equipped with automatic operation, press the window switch down (only driver(cid:146)s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way. To stop the window, lift the switch up while the window is opening.


To fully close a window equipped with automatic operation, pull the switch up to the second detent and release it; it need not be held.


Instruments and controls 2-39


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


Auto-reverse function If the control unit detects something caught in the window as it is closing, the window will be imme- diately lowered. The auto-reverse function can be activated when the window is closed by automatic operation when the ignition key is in the ON position or for 45 seconds after the ignition key is turned to the OFF position. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.


WARNING


There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.


2-40 Instruments and controls


SUNROOF (if so equipped)


LIC0679


AUTOMATIC SUNROOF The sunroof will only operate when the ignition key is in the ON position. The automatic sunroof is operational for about 45 seconds, even if the ignition key is turned to the ACC or OFF position. If the driver(cid:146)s door or the front passenger(cid:146)s door is opened during this period of about 45 sec- onds, power to the sunroof is canceled. Sliding the sunroof To fully open the sunroof, push the switch toward the To fully close the sunroof, push and hold the switch toward the


position s1 .


position s2 .


To open the sunroof part way, push the switch in any direction while the sunroof is sliding open to stop it in the desired position.


To close the sunroof part way, push and hold the switch until the sunroof is in the desired position. Tilting the sunroof To tilt the sunroof up, push the tilt switch to the


position s3 .


position s4 .


To tilt the sunroof down, push and hold the tilt switch to the Restarting the sunroof sliding switch The sliding switch will become inoperable after the battery terminal is disconnected, the electri- cal supply interrupted and/or some abnormality detected. Use the following reset procedure to return sunroof operation to normal.


1. From any sunroof position (fully open, par- tially open, closed, partially vented or vented), push and hold the tilt switch toward position s3 until the sunroof vents the in the full-up position.


The sunroof should now operate normally.


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


INTERIOR LIGHT


WARNING


c In an accident you could be thrown from the vehicle through an open sunroof. Always use seat belts and child restraints.


c Do not allow anyone to stand up or extend any portion of their body out of the sunroof opening while the vehicle is in motion or while the sunroof is closing.


CAUTION


c Remove water drops, snow, ice or sand


from the sunroof before opening.


c Do not place heavy objects on the sun-


roof or surrounding area.


Sunshade Open and close the sunshade by sliding it for- ward or backward. If the sunroof does not close Have your NISSAN dealer check and repair the sunroof.


WIC0264


The interior light has a three-position switch and operates regardless of ignition switch position. When the switch is in the ON position s1 , the interior lights illuminate, regardless of door posi- tion. The lights will go off after about 30 minutes unless the ignition key is in the ACC or ON position. When the switch is in the center O position, the interior lights will stay on for about 30 seconds when:


c The doors are unlocked by the keyfob (if so equipped), a key or the power door lock switch while all doors are closed and the ignition switch is in the OFF position.


c The driver(cid:146)s door is opened and then closed while the key is removed from the ignition switch.


c The key is removed from the ignition switch


while all doors are closed.


The lights will turn off while the 30 second timer is activated when: c The driver(cid:146)s door is locked by the keyfob (if so equipped), a key, or the power door lock switch.


c The ignition switch is turned ON. When the switch is in the OFF position s2 , the interior lights do not illuminate, regardless of door position.


The lights will turn off automatically after 30 min- utes while doors are open to prevent the battery from becoming discharged.


Instruments and controls 2-41


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


MAP LIGHTS


NOTE: The door step lights illuminate when the driver and passenger doors are open re- gardless of the interior light switch posi- tion. These lights will turn off automatically after about 30 minutes while doors are open to prevent the battery from becoming discharged.


CAUTION


Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.


Models without sunroof


Models with sunroof


WIC0289


LIC0696


To turn the map lights on, press the switches. To turn them off, press the switches again.


CAUTION


Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.


2-42 Instruments and controls


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


TRUNK LIGHT


The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light will go off after about 30 minutes if the trunk lid is left open, unless the ignition key is in the ACC or ON position. For bulb replacement procedures, refer to (cid:147)Exte- rior and interior lights(cid:148) in the (cid:147)Maintenance and do-it-yourself(cid:148) section of this manual.


HOMELINKT UNIVERSAL TRANSCEIVER (if so equipped)


The HomeLinkT Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLinkT Universal Transceiver: c Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity systems.


c Is powered by your vehicle(cid:146)s battery. No separate batteries are required. If the vehi- cle(cid:146)s battery is discharged or is discon- nected, HomeLinkT will retain all program- ming.


Once the HomeLinkT Universal Transceiver is programmed, retain the original trans- mitter for future programming procedures (Example: new vehicle purchases). Upon sale of the programmed HomeLinkT Universal Transceiver buttons should be erased for security purposes. For additional information refer to (cid:147)Program- ming HomeLinkT(cid:148) later in this section.


the vehicle,


WARNING


c Do not use the HomeLinkT Universal Transceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982). A ga- rage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features in- creases the risk of serious injury or death.


c During the programming procedure your garage door or security gate will open and close (if the transmitter is within range). Make sure that people or objects are clear of the garage door, gate, etc. that you are programming.


c Your vehicle(cid:146)s engine should be turned off while programming the HomeLinkT Universal Transceiver.


Instruments and controls 2-43


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


WIC0291


PROGRAMMING HOMELINKT 1. With the ignition key in the OFF position, press and hold the two outside buttons, and release when the indicator light begins to flash (after 20 seconds). This procedure erases the factory set default codes and does not have to be followed when program- ming additional hand-held transmitters.


2. Hold the end of the hand-held transmitter (from the device you wish to train) approxi- mately 1 - 3 inches (26 - 76 mm) away from the surface of HomeLinkT keeping the indi- cator light in view.


2-44 Instruments and controls


3. Using both hands, simultaneously push the hand-held transmitter button and the de- sired HomeLinkT button. Do not release the buttons until step 4 has been completed.


NOTE: Some garage door openers may require the procedures noted under (cid:147)Canadian Pro- gramming.(cid:148) 4. The HomeLinkT indicator will


first slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. The rapid flashing light indicates the HomeLinkT Universal Transceiver has been successfully programmed.


flash,


To program the remaining two buttons, follow steps 2 through 4. If , after repeated attempts, you do not success- fully program the HomeLinkT Universal Trans- ceiver to learn the signal of the hand-held trans- mitter, refer to (cid:147)Rolling Code Programming(cid:148) later in this section. If you have any questions or are having difficulty programming your HomeLinkT buttons, refer to the HomeLinkT web site at: www.homelink.com or call 1-800-355-3515.


PROGRAMMING HOMELINKT FOR CANADIAN CUSTOMERS Prior to 1992, D.O.C. regulations required hand- held transmitters to stop transmitting after 2 sec- onds. To program your hand-held transmitter to HomeLinkT, continue to press and hold the HomeLinkT button (note steps 2 - 4 under (cid:147)Pro- gramming HomeLinkT(cid:148)) while you press and re- press ((cid:147)cycle(cid:148)) your hand-held transmitters every 2 seconds until the indicator light flashes rapidly (indicating successful programming).


NOTE: When programming a garage door opener, etc., it is advised to unplug the device dur- ing the (cid:147)cycling(cid:148) process to prevent pos- sible damage to the garage door opener components. OPERATING THE HOMELINKT UNIVERSAL TRANSCEIVER The HomeLinkT Universal Transceiver (once pro- grammed) may now be used to activate the ga- rage door, etc. To operate, simply press the ap- propriate programmed HomeLinkT Universal Transceiver button. The red indicator light will illuminate while the signal is being transmitted.


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


PROGRAMMING TROUBLE- DIAGNOSIS If the HomeLinkT does not quickly learn the hand- held transmitter information: c replace the hand-held transmitter batteries


with new batteries.


c position the hand-held transmitter with its from the


facing


away


battery HomeLinkT surface.


area


c press and hold both the HomeLinkT and hand-held transmitter buttons without inter- ruption.


c position the hand-held transmitter 1 - 3
inches (26 - 76 mm) away from the HomeLinkT surface. Hold the transmitter in that position for up to 15 seconds. If HomeLinkT is not programmed within that time, try holding the transmitter in another position (cid:150) keeping the indicator light in view at all times.


If you continue to have programming difficulties, please contact the NISSAN Consumer Affairs Department. The phone numbers are located in the Foreword of this manual.


CLEARING THE PROGRAMMED INFORMATION Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ROLLING CODE PROGRAMMING Rolling code garage door openers (or other roll- ing code devices) which are (cid:147)code protected(cid:148) and manufactured after 1996, may be deter- mined by the following: c Reference the garage door opener Owner(cid:146)s


Manual for verification.


c The hand-held transmitter appears to pro- gram the HomeLinkT Universal Transceiver but does not activate the garage door.


c Press and hold the trained HomeLinkT but- ton. If the garage door opener has the rolling code feature, the HomeLinkT indicator light will flash rapidly, then remains on after 2
seconds.


To program the HomeLinkT Universal Transceiver to a garage door opener with the rolling code feature, follow these instructions after completing the (cid:147)Programming HomeLink(cid:148) (the aid of a sec- ond person may make the following procedures quicker and easier).


1. Locate the training button on the garage door opener motor unit. Exact location and color of the button may vary by garage door opener brand. If there is difficulty locating the training button, reference the garage door opener Owner(cid:146)s Manual.


2. Press the training button on the garage door opener motor unit (which may activate a training light).


NOTE: Following step 2, there are 30 seconds in which to initiate step 3. 3. Firmly press and release the programmed HomeLinkT button a second time to com- plete the training process. (Some garage door openers may require you to do this procedure a third time to complete the train- ing.)


The garage door opener should now recognize the HomeLinkT Universal Transceiver and acti- vate when the HomeLinkT button is pressed. The remaining two buttons may now be programmed (if not yet programmed, follow steps 2 through 4
in the (cid:147)Programming HomeLinkT(cid:148) procedures earlier in this section).


Instruments and controls 2-45


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


REPROGRAMMING A SINGLE HOMELINKT BUTTON To reprogram a HomeLinkT Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLinkT but- ton. Do not release the button until step 4
has been completed.


2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 1 - 3 inches (26 - 76
mm) away from the HomeLinkT surface.


3. Press and hold the hand-held transmitter


button.


4. The HomeLinkT indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.


The HomeLinkT Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLinkT button that was just programmed. This procedure will not affect any other programmed HomeLinkT buttons.


2-46 Instruments and controls


IF YOUR VEHICLE IS STOLEN If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLinkT. Consult the Owner(cid:146)s Manual of each device or call the manu- facturer or dealer of those devices for additional information. When your vehicle is recovered, you will need to reprogram the HomeLinkT Univer- sal Transceiver with your new transmitter information. FCC Notice: This device complies with FCC rules part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This de- vice must accept any interference that may be received, including interference that may cause undesired operation. This transmitter has been tested and com- plies with FCC and DOC/MDC rules. Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user(cid:146)s authority to op- erate the equipment. DOC: ISTC 1763K1313
FCC I.D. CV2V67690


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


3 Pre-driving checks and adjustments


Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Nissan vehicle immobilizer system keys . . . . . . . . . . . 3-2
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-4
Locking with power door lock switch . . . . . . . . . . . . . 3-4
Child safety rear door lock. . . . . . . . . . . . . . . . . . . . . . . 3-5
Remote keyless entry system (if so equipped). . . . . . . . . 3-5
How to use remote keyless entry system . . . . . . . . . . 3-6
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Trunk lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10
Opener operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Key operation (if so equipped) . . . . . . . . . . . . . . . . . . 3-11
Interior trunk lid release . . . . . . . . . . . . . . . . . . . . . . . . 3-11


Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Opener operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Tilting telescopic steering column . . . . . . . . . . . . . . . . . . 3-13
Tilt operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Telescopic operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-15
Rearview mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Automatic anti-glare rearview mirror (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


KEYS


1.


2.


WPD0128
Two master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side Valet key (black) with transponder chip (if so equipped) Key number plate Transponder chip


3. 4. A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate.


3-2 Pre-driving checks and adjustments


cause the registration process will erase the memory of all key codes previously registered into the NISSAN Vehicle Immobilizer System. After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with salt water. This could affect system function.


A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, your NISSAN dealer can duplicate it. NISSAN VEHICLE IMMOBILIZER SYSTEM KEYS You can only drive your vehicle using the master or valet keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head.


The master key can be used for all the locks.


The valet key cannot be used for the trunk lid, glove box lock or rear seatback lock.


To protect belongings when you leave a key with someone, give them the valet key only. Never leave these keys in the vehicle. Additional or replacement keys: If you still have a key, the key number is not necessary when you need extra NISSAN Vehicle Immobilizer System keys. Your dealer can dupli- cate your existing key. As many as five NISSAN Vehicle Immobilizer System keys can be used with one vehicle. You should bring all NISSAN Vehicle Immobilizer System keys that you have to your NISSAN dealer for registration. This is be-


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


DOORS


WARNING


c Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally open- ing the doors, and will help keep out intruders.


c Before opening any door, always look


for and avoid oncoming traffic.


c Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls. Unattended children could become involved in seri- ous accidents.


Opening and closing windows (if so equipped) The driver(cid:146)s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. c To open the windows, turn the driver(cid:146)s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. c To close the windows, turn the driver(cid:146)s door key toward the front of the vehicle for longer than 1 second after the door is locked.


Driver(cid:146)s side


WPD0129


LOCKING WITH KEY The power door lock system allows you to lock or unlock all doors at the same time. Turning the key toward the front s1 of the vehicle locks all doors. Turning the key one time toward the rear s2 of the vehicle unlocks that door. From that position, returning the key to neutral s3 (where the key can only be removed and inserted) and turning it toward the rear again within 5 seconds unlocks all doors s4 .


Pre-driving checks and adjustments 3-3


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


Lockout protection When the power door lock switch (driver(cid:146)s or front passenger(cid:146)s side) is moved to the lock position with the key in the ignition and any door open, all doors will lock and unlock automatically. This helps to prevent the keys from being acci- dently locked inside the vehicle.


Inside lock


Door lock switch


WPD0291


LPD0292


LOCKING WITH INSIDE LOCK KNOB To lock the door without the key, move the inside lock to the lock position s1 , then close the door. To unlock the door without the key, move the inside lock knob to the unlock position s2 .


LOCKING WITH POWER DOOR LOCK SWITCH To lock all the doors without a key, push the door lock switch (driver or front passenger side), to the lock position s1 . When locking the door this way, be certain not to leave the key inside the vehicle. To unlock all the doors without a key, push the door lock switch (driver or front passenger side) to the unlock position s2 .


3-4 Pre-driving checks and adjustments


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


APD1010
CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the lock position, the door can be opened only from the outside.


CAUTION


Listed below are conditions or occur- rences which will damage the keyfob: c Do not allow the keyfob to become wet. c Do not drop the keyfob. c Do not strike the keyfob sharply against


another object.


c Do not place the keyfob for an extended period in an area where temperatures exceed 140(cid:176)F (60(cid:176)C).


If a keyfob is lost or stolen, NISSAN rec- ommends erasing the ID code of that key- fob. This will prevent the keyfob from un- authorized use to unlock the vehicle. For information regarding the erasing proce- dure, please contact a NISSAN dealer.


REMOTE KEYLESS ENTRY SYSTEM (if so equipped)


It is possible to lock/unlock all doors, turn the interior light on, and activate the panic alarm by using the keyfob from outside the vehicle.


Some settings for the keyfob, such as horn beep, can be adjusted. For vehicles without navigation system, refer to (cid:147)Silencing the horn beep feature(cid:148) later in this section. For vehicles with navigation system, refer to (cid:147)Vehicle electronic systems(cid:148) in the (cid:147)Display screen, heater, air conditioner and audio systems(cid:148) section later in this manual. Be sure to remove the key from the vehicle before locking the doors.


The keyfob can operate at a distance of approxi- mately 33 ft (10 m) from the vehicle. The effective distance depends upon the conditions around the vehicle.


As many as 5 keyfobs can be used with one vehicle. For information concerning the purchase and use of additional keyfobs, contact a NISSAN dealer.


The keyfob will not function when: c the battery is discharged c the distance between the vehicle and the


keyfob is over 33 ft (10 m)


The panic alarm will not activate when the key is in the ignition switch.


Pre-driving checks and adjustments 3-5


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


c When the


button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a reminder that the doors are already locked.


c If a door is open and you push the


button, the doors will lock but the horn will not beep and the hazard lights will not flash. The horn may or may not beep once. Refer to (cid:147)Silencing the horn beep feature(cid:148) later in this section for details.


LPD0209


HOW TO USE REMOTE KEYLESS ENTRY SYSTEM Locking doors 1. Close all windows. 2. Remove the key from the ignition switch. 3. Close the hood, trunk lid, and all doors. 4. Push the


button on the keyfob. All the doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked.


3-6 Pre-driving checks and adjustments


LPD0210


button on the keyfob once.


Unlocking doors Push the c Only the driver(cid:146)s door unlocks. c The hazard indicator flashes once if all doors are completely closed with the ignition key in any position except the ON position.


c The interior light turns on and the light timer activates for 30 seconds when the switch is in the center O position with the ignition key in any position except the ON position.


Push the 5 seconds.


button on the keyfob again within


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


c All doors unlock. c The hazard indicator flashes once if all doors


are completely closed.


The interior lights can be turned off without wait- ing 30 seconds by inserting the key into the ignition and turning to the ON or START position, locking the doors with the keyfob or pushing the interior light switch to the OFF position. Auto relock When the button on the keyfob is pushed, all doors will lock automatically within 1 minute unless one of the following operations is per- formed: c Any door is opened. c A key is inserted into the ignition switch and


the key is turned from OFF to ON.


WPD0319


LPD0211


Releasing the trunk lid Push the button on the keyfob for longer than 0.5 second to open the trunk lid. The trunk release button on the keyfob will not operate when the ignition switch is in the ON position. The trunk lid will open when using the key- fob even if the trunk lid release cancel switch is turned to OFF. See (cid:147)Trunk lid(cid:148) later in this section for cancel switch infor- mation.


Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pushing and holding the button on the keyfob for longer than 0.5 second. The panic alarm and headlights will stay on for 25
seconds. The panic alarm stops when: c it has run for 25 seconds, or c any button is pushed on the keyfob.


Pre-driving checks and adjustments 3-7


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


button on the keyfob.


The door windows will open while pressing the The door windows cannot be closed by using the keyfob.


To deactivate: Press and hold the and


buttons for at least 2 seconds.


The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated. To activate: Press and hold the and once more.


buttons for at least 2 seconds


The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated.


LPD0262


Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the keyfob.


NOTE: If you change the horn beep and lamp flash feature with the keyfob, the display screen (if so equipped) will not show the current mode and cannot be used to change the mode. Use the keyfob to return to the pre- vious mode and re-enable the display screen control.


3-8 Pre-driving checks and adjustments


button on the keyfob once to turn


Deactivating the horn beep feature does not si- lence the horn if the alarm is triggered. Using the interior lights Push the on the interior lights. For additional information, refer to (cid:147)Interior lights(cid:148) in the (cid:147)Instruments and controls(cid:148) section earlier in this manual. Opening windows (if so equipped) The keyfob allows you to open the front windows simultaneously. c To open the front windows, press the


button on the keyfob for longer than 3
seconds after all doors are unlocked.


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


HOOD


5. When closing the hood, return the support rod to its original position, lower the hood to approximately 12 inches above the latch and release it. This allows proper engagement of the hood latch.


WARNING


c Make sure the hood is completely closed and latched before driving. Fail- ure to do so could cause the hood to fly open and result in an accident.


c If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.


s1 Pull the hood lock release handle located below the driver side instrument panel; the hood springs up slightly.


s2


Lift the lever at the front of the hood with your fingertips and raise the hood.


WPD0288


s3 Remove the support rod from the clamp. s4


Insert the support rod into the slot on the passenger side fender ledge.


Pre-driving checks and adjustments 3-9


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


c Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously in- jured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children(cid:146)s access to car keys.


To open the trunk lid, push the opener lever down. To close the trunk lid, lower and push the trunk lid down securely.


NOTE: You cannot open the trunk lid with the trunk lid opener lever if the vehicle security system (if so equipped) is armed.


LPD0085


Cancel switch (if so equipped) When the cancel switch located inside the glove box is OFF, the trunk lid cannot be opened with the trunk lid release switch. It can be opened with the master key or keyfob.


TRUNK LID


LPD0287


OPENER OPERATION


WARNING


c Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See (cid:147)Ex- haust gas(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


3-10 Pre-driving checks and adjustments


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


To open the trunk from the inside, pull the illumi- nated release handle until the lock releases and push up on the trunk lid. The release handle is made of a material that glows in the dark after a brief exposure to ambient light. The handle is located inside the trunk compart- ment on the interior of the trunk lid.


WPD0138


LPD0289


KEY OPERATION (if so equipped) To open the trunk lid, turn the key clockwise. To close the trunk lid, lower and push the trunk lid down securely.


INTERIOR TRUNK LID RELEASE


WARNING


Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children(cid:146)s access to car keys.


The interior trunk lid release mechanism provides a means of escape for children and adults in the event they become locked inside the trunk.


Pre-driving checks and adjustments 3-11


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


FUEL-FILLER DOOR


WARNING


c Gasoline is extremely flammable and highly explosive under certain condi- tions. You could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling.


c Fuel may be under pressure. Turn the cap a third of a turn, and wait for any (cid:147)hissing(cid:148) sound to stop to prevent fuel from spraying out and possibly causing personal injury. Then remove the cap.


c Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire.


c Use only an original equipment type fuel-filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emis- sion control system. An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator light to come on. c Never pour fuel into the throttle body to


attempt to start your vehicle.


WPD0290


LPD0189


OPENER OPERATION The fuel-filler door opener lever is located on the outside of the driver(cid:146)s seat s1 . To open the fuel-filler door, pull the opener lever up. To lock, close the fuel-filler door securely.


FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. Turn the cap counterclockwise to remove. To tighten, turn the cap clockwise until ratcheting clicks are heard. Put the fuel-filler cap on the cap holder s1 while refueling.


3-12 Pre-driving checks and adjustments


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


c Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: (cid:150) Always place the container on the


ground when filling.


(cid:150) Do not use electronic devices when


filling.


(cid:150) Keep the pump nozzle in contact with the container while you are fill- ing it.


(cid:150) Use only approved portable fuel con-


tainers for flammable liquid.


TILTING TELESCOPIC STEERING COLUMN


CAUTION


c If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.


c Tighten until the fuel-filler cap clicks. Failure to tighten the fuel-filler cap properly may cause the mal- function indicator light (MIL) to illumi- nate. If the light illuminates be- cause the fuel-filler cap is loose or missing, tighten or install the cap and to continue vehicle. The light should turn off after a


drive


the


If the


light few driving trips. does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer. c For additional


information, see the (cid:147)Malfunction indicator light (MIL)(cid:148) in the (cid:147)Instruments and Controls(cid:148) section earlier in this manual.


WPD0234


TILT OPERATION Pull the lock lever s1 forward and adjust the steering wheel up or down s2 to the desired position. Release the lock lever to lock the steering wheel in place.


WARNING


Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident.


Pre-driving checks and adjustments 3-13


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


SUN VISORS


WPD0140


WPD0141


Slide the sun visor extension (if so equipped) in or out as needed.


CAUTION


Do not store the sun visor before returning the extension to its original position.


VANITY MIRRORS To access the vanity mirror, pull the sun visor down and flip open the mirror cover. Some vanity mirrors are illuminated and turn on when the mirror cover is open.


TELESCOPIC OPERATION Push the lock lever s3 down and adjust the steering wheel forward or backward s4 to the desired position. Pull the lock lever up firmly to lock the steering wheel in place.


WARNING


Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driv- er(cid:146)s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash. You may also receive serious or fatal injuries from the air bag if you are up against it when it inflates. Always sit back against the seatback and as far away as practical from the steering wheel. Always use the seat belts.


3-14 Pre-driving checks and adjustments


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


MIRRORS


WPD0126


LPD0280


REARVIEW MIRROR The night position s1 reduces glare from the headlights of vehicles behind you at night. Use the day position s2 when driving in daylight hours.


WARNING


Use the night position only when neces- sary, because it reduces rear view clarity.


AUTO button


AUTO indicator light Sensor (on back of mirror) Sensor


1. 2. OFF button 3. 4. 5. AUTOMATIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror is designed so that it automati- cally changes reflection according to the intensity of the headlights of the vehicle following you.


To turn off the automatic anti-glare feature, press the OFF button. To turn on the automatic anti-glare feature, press the AUTO button. Do not hang any object on the sensor or apply glass cleaner. Doing so will reduce the sensitivity of the sensor, resulting in improper operation. OUTSIDE MIRRORS


WARNING


c Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.


c Do not adjust the mirrors while driving. You could lose control of your vehicle and cause an accident.


The indicator light will illuminate when the auto- matic anti-glare feature is on.


Pre-driving checks and adjustments 3-15


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


WPD0274


LPD0296


Electric control type (if so equipped) The outside mirror remote control only operates when the ignition switch is in the ACC or ON position. Rotate the control lever to select the right or left mirror. Adjust the mirror to the desired position by moving the control lever.


Manual control type The outside mirror can be moved in any direction for a better rear view. Heated mirrors (if so equipped) Some outside mirrors can be heated to defrost, defog, or de-ice for improved visibility. For addi- tional information, see (cid:147)Rear window and outside mirror (if so equipped) defroster switch(cid:148) in the (cid:147)Instrument and controls(cid:148) section of this manual.


3-16 Pre-driving checks and adjustments


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


4 Display screen, heater, air conditioner and audio systems


Control panel buttons (if so equipped) . . . . . . . . . . . . . . . 4-2
Names of the components. . . . . . . . . . . . . . . . . . . . . . . 4-3
How to use joystick and (cid:147)ENTER(cid:148) button . . . . . . . . . . 4-3
How to use (cid:147)PREV(cid:148) button . . . . . . . . . . . . . . . . . . . . . . 4-3
Setting up the start-up screen . . . . . . . . . . . . . . . . . . . 4-3
How to use the (cid:147)TRIP(cid:148) button . . . . . . . . . . . . . . . . . . . . 4-4
How to use the (cid:147)SETTING(cid:148) button. . . . . . . . . . . . . . . . 4-6
button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Heater and air conditioner (manual). . . . . . . . . . . . . . . . . 4-11
Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Heater operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Air conditioner operation (if so equipped) . . . . . . . . 4-15
Air flow charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16


Heater and air conditioner (automatic) (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Automatic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Manual operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21


Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22
Servicing air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22
Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-23
FM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
AM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Satellite radio reception (if so equipped) . . . . . . . . . 4-23
Audio operation precautions . . . . . . . . . . . . . . . . . . . . 4-24
FM-AM radio with compact disc (CD) player (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
FM-AM SAT radio with compact disc (CD) changer (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 4-30
FM-AM-SAT radio with compact disc (CD) changer (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 4-35
CD care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40
Steering wheel switch for audio control (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41
Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


WARNING


c Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation.


c Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock.


c Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock.


c In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest NISSAN dealer. Ignoring such conditions may lead to accidents, fire or electrical shock.


CONTROL PANEL BUTTONS (if so equipped)


When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will use up all the battery power, and the engine will not start.


LHA0458


Reference symbols: (cid:147)ENTER(cid:148) button (cid:151) This is a button on the con- trol panel.


4-2 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


If you do not touch the button or screen key for more than 1 minute on the TRIP, SETTING or START-UP screen, the screen will change to TRIP screen automatically. To proceed to the next step, refer to the separate Navigation System Owner(cid:146)s Manual.


brightness control button (P. 4-10)


(cid:147)Display(cid:148) key (cid:151) This is a select key on the screen. By selecting this key you can proceed to the next function. NAMES OF THE COMPONENTS 1. 2. PREV (previous) button (P. 4-3) 3. Joystick and ENTER push button (P. 4-3) 4. SETTING button (P. 4-6) 5. TRIP drive computer button (P. 4-4) 6. DEST button* 7. ROUTE button* 8. MAP button* 9. GUIDE VOICE button* 10. zoom out button* 11. zoom in button* *For Navigation system control buttons, refer to the separate Navigation System Owner(cid:146)s Manual.


HOW TO USE JOYSTICK AND (cid:147)ENTER(cid:148) BUTTON Choose an item on the display using the joystick and push the (cid:147)ENTER(cid:148) button for operation. HOW TO USE (cid:147)PREV(cid:148) BUTTON This button has two functions. c Go back to the previous display (cancel). If you touch (cid:147)PREV(cid:148) button during setup, the setup will be canceled and/or the display will return to the previous screen. c Finish setup. If you touch this button after the setup is com- pleted, the setup will start over, and the display will return to the climate control or audio mode and Navigation screen. SETTING UP THE START-UP SCREEN When you turn the ignition key to ACC or ON, the SYSTEM START-UP warning is displayed on the screen. Read the warning and select the (cid:147)I AGREE(cid:148) (English) or (cid:147)ENTER(cid:148) (Fran(cid:231)ais) key then push the (cid:147)ENTER(cid:148) button. If you do not push the (cid:147)ENTER(cid:148) button, the Navigation system will not proceed to the next step display.


Display screen, heater, air conditioner and audio systems 4-3


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


LHA0459
HOW TO USE THE (cid:147)TRIP(cid:148) BUTTON When the (cid:147)TRIP(cid:148) button is pushed, the following modes will display on the screen. Warning message (if there are any) ! TRIP 1
(Elapsed Time, Driving Distance, Average Speed) ! TRIP 2 ! FUEL ECONOMY (Average Fuel Economy, Distance to Empty) ! MAINTE- NANCE (Engine Oil, Tire Rotation and Tire Pres- sure (cid:151) if so equipped) ! OFF.


LHA0460


LHA0461


Trip 1, trip 2 and fuel economy items To reset the TRIP 1, TRIP 2 and FUEL ECONOMY, select the (cid:147)RESET(cid:148) key using the joystick and push the (cid:147)ENTER(cid:148) button or push the (cid:147)TRIP(cid:148) button for more than approximately 1.5 seconds.


Maintenance items You can set the engine oil and the tire rotation interval. To display the setting of the maintenance interval, select the (cid:147)Engine Oil(cid:148) or (cid:147)Tire Rotation(cid:148) key using the joystick and push the (cid:147)ENTER(cid:148) button.


4-4 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


the maintenance interval, select


LHA0462
the To set (cid:147)Maintenance Schedule(cid:148) key by using the joystick and push the joystick to right or left. To reset the maintenance interval, select the (cid:147)Re- set(cid:148) key using the joystick and push the (cid:147)EN- TER(cid:148) button. To display the MAINTENANCE INFORMATION automatically when set trip distance is reached, select the (cid:147)Display Maintenance Notifica- tion(cid:148) key and push the (cid:147)ENTER(cid:148) button.


LHA0463


LHA0483
The (cid:147)MAINTENANCE NOTICE(cid:148) screen ((cid:147)EN- GINE OIL(cid:148) and (cid:147)TIRE ROTATION(cid:148)) will be auto- matically displayed as shown when both of the following conditions are met: c the vehicle is driven the set distance and the


ignition key is turned OFF.


c the ignition key is turned ON the next time


the vehicle will be driving.


To return to the previous display after the (cid:147)MAIN- TENANCE NOTICE(cid:148) screen is displayed, press the PREV button.


Display screen, heater, air conditioner and audio systems 4-5


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


The (cid:147)MAINTENANCE NOTICE(cid:148) screen displays each time the key is turned ON until one of the following conditions are met: c (cid:147)RESET(cid:148) is selected. c (cid:147)Display Maintenance and Notification(cid:148) is


set OFF.


c the maintenance interval is set again.


Brightness/Contrast/Map Background: To adjust the brightness and contrast of the screen, select the (cid:147)Brightness/contrast(cid:148) key and push the (cid:147)ENTER(cid:148) button. You can then use the joystick to adjust the brightness to Darker or Brighter and the contrast to Lower or Higher. For information on Map Background, please refer to the separate Navigation System Owner(cid:146)s Manual. Display Off: To turn off the screen, push the (cid:147)SETTING(cid:148) button and select the (cid:147)Display(cid:148) key and (cid:147)Dis- play Off(cid:148) key. The indicator of the (cid:147)Display Off(cid:148) will turn to amber. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished on the map display in the Audio, HVAC (Heater and air conditioner), SETTING or VE- HICLE INFO modes. To turn on the screen, push the (cid:147)SETTING(cid:148) button and select the (cid:147)Display(cid:148) key and (cid:147)Dis- play Off(cid:148) key, then set the screen to on by pushing the (cid:147)ENTER(cid:148) button.


LHA0268


HOW TO USE THE (cid:147)SETTING(cid:148) BUTTON To adjust the various settings within the display screen press the(cid:147)SETTING(cid:148) button. After pressing the SETTING button a menu will be shown on the display screen which will allow you to program several functions such as the display screen appearance, programmable fea- tures for your vehicles electronics system and other system settings such as your clock. To make a selection from this mode use the joystick and press the (cid:147)ENTER(cid:148) button.


4-6 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


Remote unlock driver(cid:146)s door first: This option allows you to select which doors will unlock first during an unlocking operation: Only the driver(cid:146)s door ˆ! All the doors Keyless remote response (cid:151) horn: This key allows you to change the horn chirp mode that occurs when pressing the LOCK or UNLOCK button on the keyfob.


NOTE: If you change the horn beep or the lamp flash feature with the keyfob, the display screen will not show the current mode. Use the keyfob to return to the previous mode and re-enable the display screen control. Keyless remote response (cid:151) lights: This key allows you to change the hazard indica- tor flash mode that occurs when pressing the LOCK or UNLOCK button on the keyfob.


NOTE: If you change the horn beep or the lamp flash feature with the keyfob, the mode will not be changed with the display. Use the keyfob to return to the previous mode and re-enable the display control.


LHA0464


WRS0443


Vehicle electronic systems The VEHICLE ELECTRONIC SYSTEMS screen will appear when selecting the (cid:147)Vehicle Elec- tronic Systems(cid:148) key with the joystick and push- ing the (cid:147)ENTER(cid:148) button. To set the various electronic systems operating conditions, select the applicable item using the joystick, and push the (cid:147)ENTER(cid:148) button. The indicator light, box at left of selected item, alter- nately turns on and off each time the (cid:147)ENTER(cid:148) button is pressed. Indicator light is illuminated (cid:151) ON Indicator light is not illuminated (cid:151) OFF


Display screen, heater, air conditioner and audio systems 4-7


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


Auto re-lock time: This key allows you to set the length of time before doors auto re-lock. Sensitivity of automatic headlights: This key allows you to set the sensitivity of the automatic headlights: c Lower- less sensitive, automatic headlights will take longer to come on when the head- light sensor senses less ambient light.


c Higher- more sensitive, automatic head- lights will come on quicker when the head- light sensor senses less ambient light.


Automatic headlights off delay: This key allows you to set the length of time before the automatic headlights turn off after exiting the vehicle. Speed dependent wiper: This key allows you to turn on or turn off the driving speed dependent intermittent wiper func- tion. Return all settings to default: When this key is selected and turned on using the (cid:147)ENTER(cid:148) button, all settings made by VE- HICLE ELECTRONICS will return to the default settings.


LHA0262


LHA0270


System settings Language/Unit The LANGUAGE/UNIT screen will appear when selecting the (cid:147)Language/Unit(cid:148) key and push- ing the (cid:147)ENTER(cid:148) button. Language: English or French Unit: US (cid:151) mile, (cid:176)F, MPG


Metric (cid:151) km, (cid:176)C, L/100 km


You can select the language and unit using the joystick and (cid:147)ENTER(cid:148) button.


Clock Adjusting the time: Select the (cid:147)Hours(cid:148) or (cid:147)Minutes(cid:148) key and move the joystick to the right or left to adjust the time. The time will change step by step. After completion of (cid:147)PREV(cid:148) button.


the setting, press the


4-8 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


LHA0271


LHA0272


LHA0273


Setting daylight savings time: Use the (cid:147)Daylight Saving Time(cid:148) key to adjust the clock to daylight savings time. ON: The displayed time advances by 1 hour. OFF: The current time is displayed.


Adjusting the time to the GPS: Select the (cid:147)Auto Adjust(cid:148) key. The time will be reset to the GPS time.


Selecting the time zone: 1. Select the (cid:147)Select Time Zone(cid:148) key. The [TIME ZONE] screen will appear.


Display screen, heater, air conditioner and audio systems 4-9


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


The GPS time (manual time) corresponding to the selected zone will be displayed. Pacific zone has been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if any audio button is pushed.


BUTTON


To change the display brightness, push the button. Pushing the button again will change the display to DAY or NIGHT display. Then, adjust the brightness moving the joystick right or left. If no operation is done within 10 seconds, or if the (cid:147)PREV(cid:148) button is pushed, the display will return to the previous display.


LHA0274
2. Select one of the following zones depending


on the current location. c Pacific zone c Mountain zone c Central zone c Eastern zone c Atlantic zone c Newfoundland zone


After selection, the [CLOCK SETTINGS] screen will appear.


4-10 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


VENTILATORS


Adjust air flow direction for the driver side s1 , center s2 , and passenger side s3 ventilators by moving the ventilator slide and/or ventilator as- semblies.


LHA0439


HEATER AND AIR CONDITIONER (manual)


WARNING


c The air conditioner cooling function op- erates only when the engine is running. c Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.


c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.


c Positioning of the heater and/or air conditioner controls should not be done while driving so full attention may be given to vehicle operation.


Display screen, heater, air conditioner and audio systems 4-11


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


Type A


WHA0470


1. 2. 3. 4. 5.


Fan control dial Air recirculation button Temperature control dial Air flow control dial Rear window defroster


4-12 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


(cid:151) Air flows from defroster outlets


and foot outlets.


(cid:151) Air flows mainly from defroster


outlets.


Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right.


Air recirculation button


LHA0440


NOTE:


Type B


Fan control dial Air recirculation button Temperature control dial Air conditioner button (if so equipped) Air flow control dial Rear window defroster


1. 2. 3. 4. 5. 6. CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed.


Air flow control dial The air flow control dial allows you to select the air flow outlets. MAX A/C


(cid:151) Air flows from center and side


vents with maximum cooling (air conditioning if so equipped). (cid:151) Air flows from center and side


ventilators.


(cid:151) Air flows from center and side


ventilators and foot outlets.


(cid:151) Air flows mainly from foot outlets.


The air recirculation feature is available only on those vehicles equipped with air conditioning.


ON position (Indicator light on): Interior air is recirculated inside the vehicle.


button to the on position when:


Push the c driving on a dusty road. c to prevent traffic fumes from entering pas-


senger compartment.


c for maximum cooling when using the air con-


ditioner.


Display screen, heater, air conditioner and audio systems 4-13


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


OFF position (Indicator light off): Outside air is drawn into the passenger compart- ment and distributed through the selected outlet. Use the off position for normal heater or air con- ditioner operation.


Air conditioner button (if so equipped)


The button is provided only on vehicles equipped with an air conditioner. Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. The indicator light comes on when the air conditioner is operating. To turn off the air conditioner, push the button again. The air conditioner cooling function oper- ates only when the engine is running. Rear window defroster switch For more information about the rear window de- froster switch, see (cid:147)Rear window and outside mirror (if so equipped) defroster switch(cid:148) in the (cid:147)Instruments and controls(cid:148) section of this manual.


HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets. 1. Push the


button to the off position for


normal heating.


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de- sired position between the middle and the hot position.


Ventilation This mode directs outside air to the side and center ventilators. 1. Push the 2. Turn the air flow control dial to the


button to the off position.


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows.


1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


c To quickly remove ice or fog from the win- dows, turn the fan control dial to HI and the temperature control lever to the full HOT position. c When the


position is selected, the air conditioner automatically turns on (however, the indicator light will not illuminate) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). The air conditioning system will con- tinue to operate until the vehicle is restarted, even if the air flow control dial is turned to a position other than the position. This dehumidifies the air which helps defog the windshield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.


4-14 Display screen, heater, air conditioner and audio systems


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


Bi-level heating This mode directs air from the side, center and the foot outlets.


1. Push the


button to the off position.


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Heating and defogging This mode heats the interior and defogs the wind- shield. 1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


c When the


position is selected, the air conditioner automatically turns on (however, the indicator light will not illuminate) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). The air conditioning system will con-


tinue to operate until the vehicle is restarted, even if the air flow control dial is turned to a position. This position other than the dehumidifies the air which helps defog the windshield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.


Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. AIR CONDITIONER OPERATION (if so equipped) Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air.


1. Push the


button to the off position.


2. Turn the air flow control dial to the MAX A/C


or


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Push the comes on.


button. The indicator light


5. Turn the temperature control dial to the de-


sired position.


c For quick cooling when the outside tem- perature is high, push the button to the on position (indicator light on). Be sure to return the button to the off position for normal cooling. MAX A/C may be used for quick cooling.


Dehumidified heating This mode is used to heat and dehumidify the air.


1. Push the


button to the off position.


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Push the comes on.


button. The indicator light


Display screen, heater, air conditioner and audio systems 4-15


Z REVIEW COPY—2006 Altima (l30) Owners Manual—USA_English (nna) 09/08/05—debbie X


AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air recirculation button should always be in the OFF posi- tion for heating and defrosting.


5. Turn the temperature control dial to the de-


sired position.


Dehumidified defogging This mode is used to defog the windows and dehumidify the air.


1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Push the comes on.


button. The indicator light


When the or positions in between are selected, the air conditioner automatically turns on (however, the indicator light will not illuminate) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). The air conditioning system will con- tinue to operate until the vehicle is restarted, even if the air flow control dial is turned to a position position. This dehumidifies other than the the air which helps defog the windshield. The mode automatically turns off, allowing outside air to be drawn into the passenger com-

Loading...
x