2008 Jeep Wrangler Owners Manual

Safety Checks You Should Make Outside The Vehicle

Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect for tread cuts or sidewall cracks. Check wheel nuts for tightness and tires (includ- ing spare) for proper pressure. Lights Have someone observe the operation of all exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Fluid Leaks Check area under vehicle after overnight parking for fuel, coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected, the cause should be located and corrected immediately.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CONTENTS

䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .83
▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . .84
䡵 Hands–Free Communication (UConnect威) . . . . . .85
䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
▫ Front Seat Adjustment . . . . . . . . . . . . . . . . . . .86
▫ Manual Seat Height Adjustment

— If Equipped . . . . . . . . . . . . . . . . . . . . . . . .87
▫ Front Seatback Recline . . . . . . . . . . . . . . . . . . .87

▫ Front Easy Entry Seats (Two-Door Models) ▫ Head Restraints ▫ Fold And Tumble Rear Seat

. . . .88
. . . . . . . . . . . . . . . . . . . . . . .89

(Two-Door Models) . . . . . . . . . . . . . . . . . . . . .89

▫ Removing The Rear Seat

(Two-Door Models) . . . . . . . . . . . . . . . . . . . . .91

▫ Replacing The Rear Seat

(Two-Door Models) . . . . . . . . . . . . . . . . . . . . .92

▫ 60/40 Split Folding Rear Seat

(Four-Door Models)

. . . . . . . . . . . . . . . . . . . .92

80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

▫ To Raise The Rear Seat

. . . . . . . . . . . . . . . . . .94
䡵 To Open And Close The Hood . . . . . . . . . . . . . .94
䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . . .95
▫ Multifunction Control Lever . . . . . . . . . . . . . . .97
▫ Parking Lights, Instrument Panel Lights,

And Headlights . . . . . . . . . . . . . . . . . . . . . . .97
▫ Lights-On Reminder . . . . . . . . . . . . . . . . . . . .98
▫ Headlight Dimmer Switch . . . . . . . . . . . . . . . .98
▫ Passing Light . . . . . . . . . . . . . . . . . . . . . . . . .99
▫ Front Fog Lights — If Equipped . . . . . . . . . . . .99
▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . .99
▫ Daytime Running Lights — If Equipped . . . . . .99

䡵 Windshield Wipers And Washers . . . . . . . . . . . . 100
▫ Intermittent Wiper System . . . . . . . . . . . . . . . 100
▫ Windshield Wiper Operation . . . . . . . . . . . . . 100
▫ Windshield Washers . . . . . . . . . . . . . . . . . . . 101
▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . . 101
䡵 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . 101
䡵 Electronic Speed Control — If Equipped . . . . . . 102
▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . . 102
▫ To Set At A Desired Speed . . . . . . . . . . . . . . . 103
▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . . 103
▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . . 103
▫ To Vary The Speed Setting . . . . . . . . . . . . . . . 103
▫ Manual Transmission . . . . . . . . . . . . . . . . . . 104

▫ To Accelerate For Passing . . . . . . . . . . . . . . . 105
䡵 Electronic Brake Control System . . . . . . . . . . . . 105
▫ ABS (Anti-Lock Brake System) . . . . . . . . . . . . 105
▫ TCS (Traction Control System) . . . . . . . . . . . . 106
▫ BAS (Brake Assist System) . . . . . . . . . . . . . . . 107
▫ ERM (Electronic Roll Mitigation) . . . . . . . . . . 108
▫ ESP (Electronic Stability Program) . . . . . . . . . 109
▫ ESP/BAS Warning Light . . . . . . . . . . . . . . . . 115
䡵 Electrical Power Outlet . . . . . . . . . . . . . . . . . . . 116
▫ Electrical Outlet Use With Engine Off . . . . . . . 117
䡵 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
▫ Front Cupholders . . . . . . . . . . . . . . . . . . . . . 117
▫ Rear Cupholders . . . . . . . . . . . . . . . . . . . . . . 118

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81

䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
▫ Console Storage Compartment . . . . . . . . . . . . 118
▫ Rear Storage Compartment . . . . . . . . . . . . . . 119
䡵 Dual Top — If Equipped . . . . . . . . . . . . . . . . . 120
▫ Removing The Soft Top . . . . . . . . . . . . . . . . . 120
▫ Installing The Soft Top . . . . . . . . . . . . . . . . . 122
䡵 Freedom Top Three-Piece Modular Hard Top . . . 125
▫ Front Panel(s) Removal . . . . . . . . . . . . . . . . . 126
▫ Front Panel(s) Installation . . . . . . . . . . . . . . . 128
▫ Front Panel(s) Installation Only

(With Rear Hard Top Removed) . . . . . . . . . . . 128
▫ Rear Hard Top Removal . . . . . . . . . . . . . . . . 129
▫ Rear Hard Top Installation . . . . . . . . . . . . . . . 131

82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

䡵 Door Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
▫ Door Frame Removal (Two-Door Models) . . . . 132
▫ Door Frame Installation (Two-Door Models) . . 134
▫ Door Frame Removal (Four-Door Models) . . . . 135
▫ Door Frame Installation (Four-Door Models) . . 138
䡵 Soft Top (Two-Door Models) . . . . . . . . . . . . . . . 141
▫ Folding Down The Soft Top . . . . . . . . . . . . . . 143
▫ Putting Up The Soft Top . . . . . . . . . . . . . . . . 152
䡵 Sunrider (Two-Door Models) — If Equipped . . . 161
䡵 Sunrider (Four-Door Models) — If Equipped . . . 164
䡵 Soft Top (Four-Door Models) . . . . . . . . . . . . . . . 168

▫ Folding Down The Soft Top . . . . . . . . . . . . . . 170
▫ Putting Up The Soft Top . . . . . . . . . . . . . . . . 180
䡵 Folding Windshield . . . . . . . . . . . . . . . . . . . . . 191

▫ Lowering The Windshield And Removing

Side Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

▫ Raising The Windshield And Replacing

Side Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
䡵 Rear Window Features — Hard Top Only . . . . . 197

▫ Rear Window Wiper/Washer —

If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 197
▫ Rear Window Defroster — If Equipped . . . . . . 198

MIRRORS

Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical adjustment of the mirror.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83

Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).

Adjusting Rearview Mirror

84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror.

WARNING!

• Vehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. • Use your inside mirror when judging the size or distance of a vehicle seen in the right side mirror.

Outside Rearview Mirror

HANDS–FREE COMMUNICATION (UConnect姞) This feature is not available on two–door or four–door models.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85

Voice Recognition Button (UConnect威 Hands-Free Phone) When you press this button, a “Not Equipped with UConnect” message will display on your radio screen. Phone Button (UConnect威 Hands-Free Phone) When you press this button, a “Not Equipped with UConnect” message will display on your radio screen.

86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

SEATS

WARNING!

Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked.

Front Seat Adjustment Move seat forward or rearward by lifting the lever. Be sure the latch engages fully.

Manual Seat Adjustment

Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the ratcheting handle on the outboard side of the seat. Pull upward on the handle to raise the seat. Push downward on the handle to lower the seat.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87

Front Seatback Recline To recline: 1. Lean forward before lifting the handle, then lean back to the desired position and release the handle.

Seat Height Adjustment

Recline Lever

2. Lift the handle to return the seatback to an upright position.

88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Front Easy Entry Seats (Two-Door Models) Push the lever on the seatback rearward (toward the rear of the vehicle) to tilt the entire seat forward.

Easy Entry Lever

Easy Entry Seat

1. To return the seat to a sitting position, rotate the seatback upright until it locks. 2. Push the seat rearward until the track locks.

NOTE: The front seats have a full recliner memory, which will allow the seatback to be returned to its original position. NOTE: The front seats have a track memory, which returns the seat to just past the halfway point of the track regardless of its original position. NOTE: The recliner and easy entry levers should not be used during the automatic returning of the seat to its sitting position. Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjustable head restraints should be adjusted so that the upper edge is as high as practical. The front head restraints have a locking button that must be pushed inward to lower the head restraint. The restraints may be raised without pushing in the button. The rear head restraints are not adjustable.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89

Adjustable Head Restraints

Fold And Tumble Rear Seat (Two-Door Models)

NOTE: Prior to folding the rear seat, it may be necessary to reposition the front seats.

90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily. 1. Lift the seatback release lever and fold seatback for- ward.

Folding Rear Seat

3. When completed, return the seat to its normal posi- tion. 4. Raise the rear seatback using the assist strap and firmly lock seat into position.

Rear Seat Release 2. Slowly flip the entire seat forward.

Removing the Rear Seat (Two-Door Models)

WARNING!

• It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and • In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure that the seats are fully latched.

using a seat belt properly.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91

1. Remove the three rear subwoofer mounting screws using a #T30 Torx威 head driver.

(if equipped)

Subwoofer

2. Unplug electrical connector from rear subwoofer (if equipped). 3. Fold the rear seat forward following steps 1 through 3
under “Fold and Tumble Rear Seat” in this section.

92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

4. Press down on the release bar on each side, and pull the seat out and away from lower bracket. 5. Remove the seat from the vehicle.

Release Bar Location

Replacing the Rear Seat (Two-Door Models) Reverse steps for removing the seat.

WARNING!

• To help protect against personal injury, passengers should not be seated in the rear cargo area with the rear seat folded down or removed from the ve- hicle. • The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts.

60/40 Split Folding Rear Seat (Four-Door Models) To provide additional storage area, each rear seat can be folded flat to allow for extended cargo space and still maintain some rear seating room.

NOTE: Prior to folding the rear seat, it may be necessary to reposition the front seat to its mid-track position. Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.

WARNING!

• It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and

using a seat belt properly.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93

To Fold Down the Rear Seat Locate the pull strap (lower outboard side of seat), and pull it towards you until the seatback releases.

Pull Strap

94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Raise the Rear Seat

1. Raise the seatback and lock it into place. If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. If the rear seatback is not fully latched, the NOTE: center shoulder belt will not be able to be extended for use. If you cannot extend the center shoulder belt, please make sure your seatback is fully latched.

WARNING!

Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.

TO OPEN AND CLOSE THE HOOD To open the hood, first release both hood latches.

Hood Latch

Next, locate handle in middle of the front end of the hood. Insert hand into gap between hood and top of grille, and push handle to the side to raise hood. You may have to push down slightly on the hood before pushing the handle. Insert the support rod into the slot on the hood panel. To close the hood, remove the support rod from the hood panel and place it in the retaining clip. Lower the hood slowly. Secure both of the hood latches.

WARNING!

If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Be sure all hood latches are latched fully before driving.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95

LIGHTS

Interior Lights The overhead light will come on when a door is opened. It may also be turned on by rotating the control for the dimmer switch on the multifunction control lever fully upward. The overhead light will automatically turn off in about 20
minutes if a door is left open or the dimmer control is left in the dome light position. Turn the ignition switch ON to restore the overhead light operation. Cargo Lamp The courtesy and dome lights will turn on when the front doors are opened, when the dimmer control (rotating wheel on the right side of the switch) is rotated to the upward detent position, or if equipped, when the UN- LOCK button is pressed on the RKE key fob.

96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Also, the rear cargo lamp may be turned on by pressing the lens. Press the lens again to turn it off.

When a door is open and the interior lights are on, rotating the dimmer control all the way down to the OFF detent will cause all the interior lights to turn off. This is also known as the ⬙Party⬙ mode because it allows the doors to stay open for extended periods of time without discharging the vehicle’s battery.

Cargo Lamp

Rear Cargo Lamp (Four-Door Models)

Daytime Brightness Feature Certain instrument panel components (odometer, radio display) can be illuminated at full brightness during the daytime. This can be helpful when driving with your headlights on during the daytime, such as in a parade or a funeral procession. To activate this feature, rotate the left stalk one detent lower than the dome light. Multifunction Control Lever The multifunction control lever controls the operation of the parking lights, headlights, headlight beam selection, passing light, fog lights, instrument panel light dimming, and turn signals. The lever is located on the left side of the steering column.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97

Multifunction Control Lever

Parking Lights, Instrument Panel Lights, and Headlights Turn the end of the multifunction control lever to the first detent for parking lights and instrument panel lights. Turn to the second detent for headlight operation.

98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process.

Headlight Switch

To change the brightness of the instrument panel lights, rotate the center portion of the multifunction control lever up or down. If the driver’s door is left open, and the head- NOTE: lights or parking lights are left on, the High Beam Indicator Light will remain illuminated and a chime will sound. Lights-On Reminder If the headlights or parking lights are on after the ignition is turned off, a chime will sound when the driver’s door is opened. Headlight Dimmer Switch Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever to- wards you to switch the headlights back to low beam.

Passing Light You can signal another vehicle with your headlights by lightly pulling the multifunction control lever toward the steering wheel. This will cause the headlights to turn on at high beam and remain on until the lever is released. Front Fog Lights — If Equipped

The front fog light switch is located on the multi- function control lever. To activate the front fog lights, turn on the parking or low beam headlights

and pull out the end of the lever. NOTE: The fog lights will only operate with the parking lights or the headlights on low beam. Selecting high beam headlights will turn off the fog lights.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99

Turn Signals Move the multifunction control lever up or down, and the arrows on each side of the instrument cluster flash, to show proper operation of the front and rear turn signal lights. You can signal a lane change by moving the lever partially up or down without moving beyond the detent. If either light has a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the fuse or indicator is defective or there may be a circuit failure. NOTE: A tone will chime if the turn signals are left on for more than 1 mi (2 km). Daytime Running Lights — If Equipped The headlights come on at a low intensity level after the vehicle has been driven approximately 3 ft (1 m). They will turn off when the vehicle is turned off or when the headlights are switched on.

100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WINDSHIELD WIPERS AND WASHERS

CAUTION!

In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.

Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Move the lever to the DELAY position, then select the delay interval by turning the end of the lever. The delay can be regulated from a maximum of approximately 18 seconds between cycles, to a cycle every second.

Windshield Wiper Operation The windshield wiper/washer control lever operates the windshield wipers and washers when the ignition switch is in the ON position. The lever is located on the right side of the steering column. Move the lever upward to the second detent for LO speed wiper operation, or to the third detent for HI speed operation

Windshield Wiper/Washer Switch

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101

TILT STEERING COLUMN To tilt the column, push down on the lever under the multifunction control lever and move the wheel up or down, as desired. Pull the lever back upwards to lock the column firmly in place.

Windshield Washers To use the washer, pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for two wipe cycles after the lever is released, and then resume the intermit- tent interval previously selected. If the lever is pulled while in the OFF position, the wipers will operate for as long as the lever is held plus two wipe cycles, then turn OFF. Mist Feature Push down on the wiper lever to activate a single wipe to clear off road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate.

Tilt Steering Column

102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!

Tilting the steering column while the vehicle is moving is dangerous. Without a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving.

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 35 mph (56 km/h). The speed control lever is located on the right side of the steering wheel.

Speed Control Switches

To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system OFF, push the ON/OFF button a second time. The Cruise Indicator Light will turn off. The system should be turned OFF when not in use.

WARNING!

Leaving the Electronic Speed Control System on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it.

To Set At A Desired Speed When the vehicle has reached the desired speed, press down on the lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET lever.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103

To Deactivate A soft tap on the brake pedal, pulling the speed control lever towards you, or normal brake or clutch pressure while slowing the vehicle will deactivate speed control without erasing the set speed memory. Pressing the ON/OFF button or turning off the ignition switch erases the set speed memory. To Resume Speed To resume a previously set speed, push the RESUME ACCEL lever up and release. Resume can be used at any speed above 20 mph (32 km/h). To Vary The Speed Setting When the speed control is ON, speed can be increased by pushing up and holding RESUME ACCEL. Release the lever when the desired speed is reached, and the new speed will be set.

104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Tapping RESUME ACCEL once will result in a 1 mph (1.6
km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times will increase speed by 3 mph (4.8 km/h), etc. To decrease speed while speed control is ON, push down and hold SET DECEL. Release the lever when the desired speed is reached, and the new speed will be set. Tapping the SET DECEL button once will result in a 1
mph (1.6 km/h) speed decrease. Each time the button is tapped, speed decreases. NOTE: The Electronic Speed Control System has been designed to shut down if multiple speed control switch functions are operated simultaneously in order to ensure proper operation. If this occurs, the system can be reactivated by pushing the speed control switch ON/ OFF button and re-setting the desired vehicle SET speed.

Manual Transmission Depressing the clutch pedal will disengage the speed control. A slight increase in engine RPM before the speed control disengages is normal. Vehicles equipped with manual transmissions may need to be shifted into a lower gear to climb hills without speed loss.

WARNING!

Speed Control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105

ESP (Electronic Stability Program). All five of these systems work together to enhance vehicle stability and control in various driving conditions. ABS (Anti-Lock Brake System)

This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lock-up and help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System” in Section 5 of this manual for more information about ABS.

To Accelerate For Passing Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using Speed Control On Hills NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain and/or more frequent downshifts (auto transmission only) may occur so it may be preferable to drive without speed control.

ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system that includes ABS (Anti-Lock Brake System), TCS (Traction Control System), BAS (Brake Assist System), ERM (Electronic Roll Mitigation), and

106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!

ABS (Anti-Lock Brake System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. The capabilities of an ABS- equipped vehicle must never be exploited in a reck- less or dangerous manner which could jeopardize the user’s safety or the safety of others.

TCS (Traction Control System)

This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) to provide enhanced acceleration and stability. A feature of the TCS system functions similar to a limited slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if TCS and ESP are in either the “Partial Off” or “Full Off” modes. Refer to “ESP (Electronic Stability Program)” in this section.

BAS (Brake Assist System) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the anti-lock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance. To receive the benefit of the system, you must apply continuous brak- ing pressure during the stopping sequence. Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the BAS is deactivated.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107

WARNING!

BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent acci- dents. The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.

108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

ERM (Electronic Roll Mitigation) This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicles speed are sufficient to potentially cause wheel lift, it applies the appropriate brake and may reduce engine power to lessen the chance that wheel lift will occur. ERM will only intervene during very severe or evasive driving maneu- vers. ERM can only reduce the chance of wheel lift occurring during severe or evasive driving maneuvers. It cannot prevent wheel lift due to other factors such as road conditions, leaving the roadway or striking objects or other vehicles.

NOTE: Anytime the ESP system is in the “Full Off” mode, ERM is disabled. Refer to ESP (Electronic Stability Program) for a complete explanation of the available ESP modes.

WARNING!

Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur. ERM cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe, attentive, and skillful driver can prevent accidents. The capabilities of an ERM-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopar- dize the user’s safety or the safety of others.

ESP (Electronic Stability Program)

This system enhances directional control and stability of the vehicle under various driving conditions. ESP cor- rects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counter- acting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path. ESP uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle. When the actual path does not match the intended path, ESP applies the brake of the appropri- ate wheel to assist in counteracting the oversteer or understeer condition.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109

• Oversteer - when the vehicle is turning more than • Understeer - when the vehicle is turning less than

appropriate for the steering wheel position.

appropriate for the steering wheel position.

The ESP/TCS Indicator Light (located in the instrument cluster), starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS Indi- cator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during accelera- tion, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!

ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. The capabilities of an ESP- equipped vehicle must never be exploited in a reck- less or dangerous manner which could jeopardize the user’s safety or the safety of others.

The ESP system has three available operating modes in 4H range. The system has one operating mode in 4L range. 2WD vehicles and 4WD vehicles in 2H range have two operating modes.

4H Range (4WD Models) or 2WD Models

On This is the normal operating mode for ESP in 4H and 2WD vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4L range or NEUTRAL back to 4H range, the ESP system will be in this mode. This mode should be used for most all driving situations. ESP should only be turned to “Partial Off” or “Full Off” for specific reasons as noted below. Partial Off This mode is entered by momentarily depressing the ESP OFF switch. When in ⬙Partial Off⬙ mode, the TCS portion of ESP has been disabled and the ESP/TCS Indicator Light will be illuminated. All other stability features of ESP function normally. This mode is intended to be used if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin than ESP would normally allow is

required to gain traction. To turn ESP on again, momen- tarily depress the ESP OFF switch. This will restore the normal “ESP On” mode of operation.

ESP OFF Switch

NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off”

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111

mode by pressing the ESP OFF switch. Once the situation requiring ESP to be switched to the “Partial Off” mode is overcome, turn ESP back on by momentarily depressing the ESP OFF switch. This may be done while the vehicle is in motion. ESP Off (4H Range Only) This mode is intended for off-highway or off-road use when ESP stability features could inhibit vehicle maneu- verability due to trail conditions. This mode is entered by depressing and holding the ESP OFF switch for five seconds when the vehicle is stopped and the engine is running. In this mode, all ESP and TCS stability features are turned off except for the “limited slip” feature de- scribed in the TCS section. After five seconds, a chime will sound, the ESP/TCS Indicator Light will illuminate, and the “ESP OFF⬙ message will appear in the odometer. Refer to “Compass and Mini-Trip Computer — If Equipped” in Section 4 of this manual. To turn ESP on

112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

again, momentarily depress the ESP OFF switch. This will restore the normal “ESP On” mode of operation. NOTE: The ESP system will change to “Partial Off” mode if the vehicle speed exceeds 40 mph (64 km/h). After the vehicle speed is reduced below 35 mph (56
km/h), the ESP system will return to “Full Off” mode. NOTE: The “ESP OFF” message will display and the audible chime will sound when the shift lever is placed in the PARK position from any position other than PARK, and then moved out of the PARK position. This will occur even if the message was previously cleared.

WARNING!

With the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver, the ESP and ERM systems will not engage to assist in maintaining stability. The “Full Off” ESP mode is intended for off-road use only.

4L Range (4WD Models)

ESP Off This is the normal operating mode for ESP in 4L range. Whenever the vehicle is started in 4L range, or the transfer case (if equipped) is shifted from 4H range or NEUTRAL to 4L range, the ESP system will be in this mode. In 4L range, ESP and TCS, except for the “limited slip” feature described in the TCS section, are turned off until the vehicle reaches a speed of 40 mph (48 km/h). At

40 mph (48 km/h), the normal ESP stability function returns but TCS remains off. When the vehicle speed drops below 35 mph (40 km/h), the ESP system shuts off. ESP is off at low vehicle speeds in 4L range so that it will not interfere with off-road driving, but the ESP function returns to provide the stability feature at speeds above 40
mph (48 km/h). The ESP/TCS Indicator Light will al- ways be illuminated in 4L range when ESP is off. NOTE: The “ESP OFF” message will display and the audible chime will sound when the shift lever is placed in the PARK position from any position other than PARK, and then moved out of the PARK position. This will occur even if the message was previously cleared.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113

WARNING!

With the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver, the ESP and ERM systems will not engage to assist in maintaining stability. The “Full Off” mode is intended for off- road use only.

Disabling ESP for Modified Vehicles (4WD Models Only) Vehicles modified with larger tires and/or suspension lifts may experience early ESP activations as compared to a non-modified production vehicle depending on lift size, tire size, suspension changes and/or driving habits. If early ESP activations are experienced while driving a modified vehicle, the additional ability to permanently turn off ESP is available. A steering wheel/ESP button

114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

maneuver must be performed to permanently disable ESP and defeat the functionality of the ESP switch. Repeating the procedure will return the system to normal ESP operation and restore ESP switch functionality al- lowing ESP “Partial” or “Off” modes.

WARNING!

With ESP in the permanent disable mode, enhanced vehicle stability offered by the ESP and ERM sys- tems is unavailable. In an emergency evasive maneu- ver, the ESP and ERM systems will not engage to assist in maintaining stability. This disabled mode is intended for off-highway or off-road use only. Ve- hicle modifications requiring the owner to configure the vehicle in the ESP disabled mode, will seriously affect the vehicles roadworthiness and safety and may lead to loss of control and/or accident resulting in possible serious or fatal injuries.

The following procedure will disable (or re-enable) ESP functionality in the vehicle. 1. Shift the transfer case into the 4H range position. 2. Turn the steering wheel until it is centered and the wheels are pointed straight ahead. 3. Cycle the ignition key OFF to ON. 4. Wait approximately five seconds for the system bulb check. 5. Turn and hold the steering wheel one-half turn to the right (clockwise). 6. Press and hold the ESP OFF button for seven seconds. 7. Turn the steering wheel back to center, and turn and hold an additional one-half turn to the left (counterclock- wise). 8. Press and hold the ESP OFF button for seven seconds.

9. Turn the steering wheel back to center. 10. Press and hold the ESP OFF button for seven seconds. 11. Cycle the ignition key to OFF. After performing the ESP disable procedure correctly, “ESP OFF” will be displayed in the odometer for approxi- mately 12 seconds each time the ignition is moved to ON. Repeating the ESP disable procedure will re-enable nor- mal ESP operation. ESP/BAS Warning Light

The malfunction indicator lamp for the ESP is combined with the BAS indicator. The ESP/ BAS Warning Light in the instrument cluster comes on when the ignition switch is turned to the “ON” position. It should go out with the engine running.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115

If the ESP/BAS Warning Light comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both. If this light remains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30
mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. NOTE: • ⬙The ESP/BAS Warning Light comes on momentarily • Each time the ignition is turned ON, the ESP System • The ESP Control System will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESP becomes inactive following the maneuver that caused the ESP activation.

will be ON even if it was previously turned off.

each time the ignition switch is turned ON.

116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

ELECTRICAL POWER OUTLET This vehicle has two auxiliary power outlets that can provide up to 20 Amps of current for accessories de- signed for use with the standard power outlet adapters. The outlet located in the lower portion of the instrument panel has a snap-on plastic cap so that it can be covered when not in use. As a safety precaution, the outlet in the instrument panel only operates with the ignition switch ON. When the optional cigar lighter heating element is used, it heats when pushed in and pops out automati- cally when ready for use. To preserve the heating element, do not hold the lighter in the heating position. The right side outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting.

The left side outlet has power available only when the ignition is on. This outlet will also operate a conventional cigar lighter unit.

Power Outlets

Electrical Outlet Use With Engine Off

CUPHOLDERS

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117

WARNING!

• Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge suffi- ciently to degrade battery life and/or prevent engine starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the battery even more quickly. Only use these intermittently and with greater caution. • After the use of high-power draw accessories, or long periods of the vehicle not being started (with acces- sories still plugged in), the vehicle must be driven a sufficient length of time to allow the alternator to recharge the vehicle’s battery. • Power outlets are designed for accessory plugs only. Do not hang any type of accessory or accessory bracket from the plug.

Front Cupholders The front cupholders are located in the center console. NOTE: The front cupholder insert is removable for cleaning.

Front Cupholders

118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Rear Cupholders The rear cupholders are located on the back of the center console.

STORAGE

Console Storage Compartment To lock or unlock, insert ignition key and turn. To open, press the latch and lift cover.

Rear Cupholders

Center Console

Rear Storage Compartment The rear storage compartment cover is held by a spring- loaded latch. In order to remove the rear storage com- partment cover, use the following procedure: NOTE: The rear storage compartment latch should not be used as cargo tie-down. 1. Flip up pull loop so it is perpendicular (straight up) to the top surface of the tray. 2. Pull up on loop and twist 90 degrees, so it is parallel to the slotted hole in tray. 3. Open rear compartment cover.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119

Rear Storage Cover

120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

DUAL TOP — IF EQUIPPED If your vehicle is equipped with a Dual Top, you must remove one of the tops from the vehicle. If the soft top is removed, the pivot brackets must also be removed from the sport bar. The soft top was installed at the factory for shipping purposes only. The soft top and the hard top are to be used independently. Removal is mandatory to prevent any possible wear and tear on the soft top. Your vehicle warranty will not cover damage resulting from both tops remaining on the vehicle at the same time for extended periods of time. Removing The Soft Top

1. Locate and remove the two boxes that contain the following items:

• Right and left door frames • Door frame attachment knobs (four for two-door models, six for four-door models) • Right and left quarter windows • Rear window • Two rear window roll up straps • Two Sunrider secure straps (If Equipped) • Two rear swing gate brackets 2. Remove the hard top. Refer to “Freedom Top Three- Piece Modular Hard Top — Front/Rear Panel Removal” later in this section.

3. Remove the soft top bow assembly pivot bracket screws (two per side) using a #T30 Torx威 head driver.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121

4. Using a rubber mallet, carefully tap the knuckles from the left and right metal pivot brackets. Remove the soft top from the vehicle and store in a clean, dry location.

122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

5. Unzip the zipper on the sport bar cover to expose the pivot brackets. Remove the brackets using a #T30 Torx威 head driver. Recover and re-zip the sports bar cover. Store pivot brackets and screws in a safe place.

6. Reinstall the hard top. Refer to “Freedom Top Three- Piece Modular Hard Top — Front/Rear Panel Installa- tion” later in this section.

Installing the Soft Top

NOTE: The following procedures are for first time set up only. For future soft top procedures, refer to “Soft Top” in this section. 1. Locate and remove the following items prior to hard top removal: • Right and left door frames • Door frame attachment knobs (four for two-door models, six for four-door models) • Right and left quarter windows • Rear window 2. Remove the hard top. Refer to “Freedom Top Three- Piece Modular Hard Top — Front/Rear Panel Removal” later in this section.

3. Install the door frames. Refer to “Door Frame” in this section. 4. If the soft top has been removed, follow these steps to reinstall the soft top. If the soft top is on the vehicle, proceed to step #5.

a. If the pivot brackets have been removed, unzip the sport bar covers and attach the pivot brackets to the sports bar with the four screws that were removed using a #T30 Torx威 head driver. Re-cover and re-zip sport bar covers.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123

b. Lay the soft top into the rear of the vehicle with the bows pointing forward and the curved portion of the bows facing upward.

124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

c. Tap the knuckles on the side with a rubber mallet to reattach them to the metal pivot brackets.

d. Screw the pivot screws back into place using a #T30
Torx威 head driver. Secure them until they are snug being careful not to cross-thread the screws or over- tighten.

CAUTION!

Do not overtighten the screws. You can strip the screws if they are overtightened.

5. Unsnap and remove the black boot cover. This cover should be discarded. It was intended as a protective cover for shipping only. NOTE: A visual instruction sheet is enclosed in the dual top wrap. 6. Remove the swing gate bar (black metal bar for bottom of rear window) and set aside. NOTE: Be sure the wire harness in the left rear corner is not tangled in the soft top bows before you lift the top. 7. Put up the soft top. Refer to “Soft Top — Putting Up the Soft Top” in this section.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125

FREEDOM TOP THREE-PIECE MODULAR HARD TOP

CAUTION!

• The hard top is not designed to carry any addi- tional loads such as roof racks, spare tires, build- ing, hunting, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any additional loads other than environmen- tal (rain, snow, etc.).

CAUTION!

Do not move your vehicle until the top has been either fully attached to the windshield frame and bodyside, or fully removed.

126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Front Panel(s) Removal

NOTE: Left panel must be removed before removing right panel. 1. Fold down the sun visor, and move to the side. 2. Turn center L-shaped locks (2) from center of roof panel.

3. Turn rear L-shaped lock (located above shoulder belt anchorage).

4. Turn rear fasteners (knobs) (located on overhead speaker bar assembly) counterclockwise until they can be removed.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127

5. Unlatch the header panel latch located at the top of the windshield.

6. Remove panel. To remove right panel, follow steps above except for step 2.

128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Front Panel(s) Installation

NOTE: The front panel(s) must be positioned properly to ensure sealing. Set the panels on the windshield frame so that there is no overhang. Also, make sure that the panels are sitting flush with the body. 1. Install right panel first, then the left panel. 2. Reinstall panel(s) using the same steps for removal in reverse order. Front Panel(s) Installation Only (With Rear Hard Top Removed)

1. Turn left and right panels over and move spacer block (located on rear of panel) upward 90 degrees.

NOTE: The front panel(s) must be positioned properly to ensure sealing. Set the panels on the windshield frame so that there is no overhang. Also, make sure that the panels are sitting flush with the body. 2. Install right panel first, then the left panel.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129

5. Open swing gate all the way to ensure clearance of the rear window glass. Lift rear window glass.

3. Reinstall panel(s) using the same steps for removal in reverse order. Rear Hard Top Removal

1. Remove both front panels. Refer to “Front Panel(s) Removal” in this section. 2. Open both doors. 3. Remove the two Torx威 head screws that secure the hard top at the B-pillar (near top of door) using a #40
Torx威 head driver (4–Door Only). 4. Remove the six Torx威 head screws that secure the hard top to the vehicle (along the interior bodyside) using a #40 Torx威 head driver.

130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

6. Locate the wiring harness on the left rear inside corner of the vehicle.

7. Disconnect the rear window washer hose and install the tethered cap.

CAUTION!

Make sure storage cap is installed to prevent foreign materials from entering washer tube and clogging system, and also to prevent fluid from being sprayed into the rear of the vehicle.

8. Disconnect the wire harness from the hard top by pressing the tab at the side of the connector and pulling to disconnect. If the red latch on the connector is locked, push NOTE: the red latch to the right until you can only see the latch on one end (right) of the connector. This will unlock the connector tab, allowing the tab to be pressed down and enabling the harness to be disconnected from the hard top.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131

Rear Hard Top Installation

If the door frames are installed from soft top NOTE: usage, they must be removed prior to installation of the hard top. 1. Inspect the hard top seals for damage and replace if necessary. 2. Install the hard top using the same steps for removal in reverse order. NOTE: The hard top must be positioned properly to ensure sealing. Also, make sure that the hard top is sitting flush with the body at the sides and check to ensure that there is a uniform gap between the lift glass and hard top.

9. Close the swing gate. 10. Remove the hard top from the vehicle. Place on a soft surface to prevent damage.

132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

DOOR FRAME

WARNING!

Do not drive your vehicle on pavement with the door frame(s) removed as you will lose the protection that they can provide. This procedure is furnished for use during off-road operation only.

Door Frame Removal (Two-Door Models)

1. Unscrew and remove the door frame attachment knobs (two per side).

WARNING!

Use both hands to remove the door frames. The door frames will fold and could cause injury if both hands are not used.

2. Place one hand on the upper rear and one hand on the front of the door frame. 3. Pull the frame towards you with your rearward hand to remove the frame from the vehicle.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133

4. Screw the knobs back into the door frame and fold for storage. Store in a secure location.

WARNING!

Never store the door frames in your vehicle. In an event of an accident, a loose door frame many cause personal injury. If removed, always store the door frames outside of the vehicle.

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Door Frame Installation (Two-Door Models)

1. Unfold door frame and unscrew thumbscrews. 2. Set the door frame pin into the hole on top of the body side, behind the door opening.

3. After the door frame pin has been set into the body side hole, carefully set the front of the door frame into the rubber seal at the top of the windshield. 4. Starting with the front of the door frame, clip it over the metal side bar and then clip the rear, making sure that the material for the side bar covers is not pinched by the door frame.

5. Starting with the front knob, screw in and tighten both knobs. Repeat on the other side.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135

Door Frame Removal (Four-Door Models)

1. Unscrew and remove the two forward most door frame attachment knobs.

136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!

Use both hands to remove the door frames. The door frames will fold and could cause injury if both hands are not used.

2. Place one hand on the upper rear and one hand on the upper front of the front door frame.

3. Pull the frame towards you with your front hand to remove the frame from the vehicle.

4. Unscrew and remove the remaining door frame at- tachment knob on the rear door frame.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137

5. Place one hand on the upper rear and one hand on the upper front of the rear door frame. Pull the frame towards you with your rear hand to remove the frame from the vehicle.

138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

6. Screw the knob back into the door frame and fold for storage. Store in a secure location.

WARNING!

• Never store the door frames in your vehicle. In an event of an accident, a loose door frame many cause personal injury. If removed, always store the door frames outside of the vehicle.

Door Frame Installation (Four-Door Models)

1. Install the rear door frame first. 2. Set the door frame pin into the hole on top of the body side, just behind the rear door opening.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139

3. Position the top of the door frame against the metal sport bar and press onto the side bar making sure not to pinch the material of the sports bar covers and to ensure it is properly positioned on the seal above the front of the rear door.

4. Loosely install the rear knob (long knob) to hold the door rail in position.

140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

5. Carefully set the front of the front door frame in the rubber seal at the top of the windshield. Then, clip the front of the door rail over the side bar making sure that the material for the side bar cover is not pinched by the door frame. Position the rear of the front door frame to lay on top of the front of the rear door frame.

6. Loosely install both knobs beginning with the front knob (long knob). Then, install the middle knob (short knob) through the front and rear door frames and screw into the top of the B-pillar. 7. Tighten the front knob, then the rear most knob, and then the middle knob. Repeat this procedure for the other side.

SOFT TOP (TWO-DOOR MODELS)

CAUTION!

• The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any additional loads other than environmental (rain, snow, etc.).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141

If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl coating on the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains.

142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CAUTION!

41°F (5°C). Damage to the top may result.

• Do not run a fabric top through an automatic car wash. Window scratches and wax build up may result. • Do not lower the top when the temperature is below • Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. • Do not lower the top with the windows installed. • Refer to “Appearance Care for Fabric Top Models” in Section 7 of this manual. It contains important infor- mation on cleaning and caring for your vehicle’s fabric top. • Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top frame- work when opening or closing. Damage to the top may result.

Window and top damage may occur.

WARNING!

• Do not drive vehicle with rear window curtain up unless side curtains are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. • The fabric upper doors and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts.

Folding Down The Soft Top

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143

1 — Header Bow 2 — 2–Bow 3 — 3–Bow 4 — Sail Panel 5 — Plastic Retainer

6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window

144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145

2. Insert finger behind the plastic retainer. Pull down and roll the retainer out of the channel. Repeat this on the opposite side.

NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available through your authorized dealer. 1. If your vehicle has half doors, remove each half door window by opening the door and lifting the half door window out. NOTE: Stow half door windows carefully outside of the vehicle, never inside to avoid scratches.

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

3. Unclip and move the sun visors to the side. 4. Release the header latches and leave the hooks in the loops on the windshield.

5. Open the swing gate. 6. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearward out of the swing gate brackets.

• Unzip the rear window starting at the right lower corner of the window. Pull the zipper up, across the top and down to the left lower corner. Zipper pulls will stay on the rear window. Pull down on the rear window to disengage from the zipper on the top cover. Stow the windows carefully to avoid scratch- ing.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147

7. Undo the Velcro威 that runs along the top and rear edge of the side window. 8. Beginning from the rear lower corner, completely unzip the window.

9. Once unzipped, remove side window retainers from the door channel and body side channel. Repeat this step on the opposite side.

148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

10. Finish releasing the sail panel retainers from the body side channel at the rear corners of the vehicle.

11. As you begin to lower the top, fold the sail panels so that they rest on top of the soft top.

NOTE: When releasing the sail panel retainers, it is helpful to pull down on the rear roof bow.

12. The swing gate brackets do not need to be removed unless the hard top is being installed. To remove the swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in towards the vehicle to disengage.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149

13. Completely release the latches from the loops on the windshield frame. If your vehicle is not equipped with the Sunrider package, proceed to Step 16.

150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

14. Make sure the plastic sleeves are slid forward over the Sunrider link (Sunrider Models Only).

15. Unlatch the side bows from both door rails (Sunrider Models Only).

16. Before lowering the top, open the swing gate to prevent possible damage to the rear center high-mounted brake lamp. Move to the front of the vehicle. Grasp the side bow behind the header and lift the top, folding it toward the rear of the vehicle.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151

portion of the top from flapping outside of the vehicle. When the top is completely down, position the drip rails so they make a “v-shape”, this prevents damage to the soft top material.

17. Tuck the fabric and the check straps between the bows and as far inward as possible. This will keep any

18. Close front header latches. 19. Remove door frames, Frame” in this section.

if desired. Refer to “Door

152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Putting Up The Soft Top

1 — Header Bow 2 — 2– Bow 3 — 3–Bow 4 — Sail Panel 5 — Plastic Retainer

6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153

1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels

154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1. Unclip and move the sun visors to the side. 2. Install door frames, if removed. Refer to “Door Frame” in this section. 3. Make sure the plastic sleeve is slid rearward over Sunrider link (Sunrider Models Only).

4. Standing on the side of the vehicle, lift the top by the side bow and the 2–bow (middle bow) up and over the sports bar until the header rests on the top of the windshield frame.

5. Before attaching the header latches, be sure that the top retainers above the door are not trapped between the top and the door frame.

6. Make sure the Sunrider bracket on the side bows latches to the door rails (Sunrider Models Only). 7. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155

8. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it rearward and over the channel until it snaps onto the exterior part of the rail. To be properly located, the bracket must only be clipped to the shortened rail edge.

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

9. Move to the rear of the vehicle and gently pull the sail panels over the rear roof bow.

10. Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) towards the rear window loose (on both sides). Pulling down on the rear roof bow (3–bow) will aid to reach the channel with the retainers.

11. To install the side windows, affix the window tem- porarily by attaching to the Velcro威 in the rear corner. Start the zipper but close only about 1 in (2.5 cm).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157

12. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window.

158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

13. Continue closing the zipper only along the top edge of the window.

14. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the Velcro威 along the top and rear of the window. Repeat this step for the opposite side.

15. Locate the black swing gate bar. Slide the swing gate bar over the receiver at the bottom inside of the rear window. The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed.

16. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159

17. Run the zipper fully around to the right side of the window.

160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

18. Grasp the swing gate bar and position it into the swing gate brackets.

20. Open the doors and insert the roof retainers into the channels above the door, starting at the front and work- ing rearward.

19. Apply downward pressure on the top corner of the rear soft top bow (3–bow), then complete attaching the sail panel retainers into the body side channel.

21. Close the header latches and return the sun visors to their secured position.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161

To Open 1. Insert finger behind the plastic retainer. Pull down and roll the retainer out of the channel. Repeat this on the other side.

SUNRIDER (TWO-DOOR MODELS) — IF EQUIPPED

If you are going to be driving faster than 40 mph NOTE: (64 km/h) with the Sunrider feature open, it is recom- mended that you remove the rear window of the vehicle.

162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

2. Unclip and move the sun visors to the side. 3. Release the header latches from the loops on the windshield frame.

4. Slide the plastic sleeve forward.

5. Grasp the header and lift the top back. Make sure the material is folded back as shown. NOTE: The Sunrider latch on the door rail should not be activated for Sunrider use. If activated, the soft top must be reinstalled starting from the sail panels.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163

6. Locate straps to secure side bows. Wrap straps around bows as shown. Repeat on the other side.

7. Reposition sun visors.

164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Close 1. Remove straps from side bows. 2. Unclip and move sun visors to the side. 3. Grasp the front header and pull to the front of the vehicle. 4. Hook header latches to the loops on the windshield frame, close latches, and return sun visor’s to their original position. 5. Slide plastic sleeve rearward over Sunrider link. 6. Tuck drip rail retainers into door frame slots.

SUNRIDER (FOUR-DOOR MODELS) — IF EQUIPPED

If you are going to be driving faster than 40 mph NOTE: (64 km/h) with the Sunrider feature open, it is recom- mended that you remove the rear window of the vehicle. To Open 1. Above the front of the rear door, place finger up into the cutout in the plastic retainer and pull down, rolling both the front and rear retainers out of the door frame. Repeat this on the other side. NOTE: All plastic retainers must be removed from the door rail prior to the operation of the Sunrider.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165

3. Release the header latches from the loops on the windshield frame.

2. Unclip and move the sun visors to the side.

166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

4. Grasp the front side bow behind the header, and lift the top.

5. Fold back the front section of the top, and gently rest the header on top of the rear portion of the deck.

6. Fold the top material so that the plastic retainers form a “W” as shown. Enter the vehicle, and move the material into two folds. Ensure that the straps are securely stowed.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167

7. Close the front header latches. 8. Secure the top by using the two provided straps. Each strap will wrap around the side bow and Velcro威 to itself, use one strap on each side of the vehicle.

To Close Perform the above steps in the opposite order.

168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

SOFT TOP (FOUR-DOOR MODELS)

CAUTION!

• The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any additional loads other than environmental (rain, snow, etc.).

If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl coating on the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be snapped into place. If temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains.

CAUTION!

WARNING!

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169

may scratch the window.

(5°C). Damage to the top may result.

Window scratches and wax build-up may result.

• Do not run a fabric top through an automatic car wash. • Do not lower the top when the temperature is below 41°F • Do not lower the top when the windows are dirty. Grit • Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. • Do not lower the top with the windows installed. Win- • Refer to “Appearance Care for Fabric Top Models” in Section 7 of this manual. It contains important informa- tion on cleaning and caring for your vehicle’s fabric top. • Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result.

dow and top damage may occur.

• Do not drive vehicle with rear window curtain up unless side curtains are also open. Dangerous exhaust gases which can kill could enter the ve- hicle. • The fabric upper doors and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts.

170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Folding Down The Soft Top

1 — Header Bow 2 — 2–Bow 3 — 3–Bow 4 — 4–Bow 5 — Sail Panel

6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window

11 — Plastic Retainer

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171

1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels

172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available through your authorized dealer. 1. If your vehicle has half-doors, remove each half-door window by opening the door and lifting the half-door window out. NOTE: Stow half-door windows carefully outside of the vehicle, never inside to avoid scratches. 2. Above the front of the rear door, place finger up into the cutout in the plastic retainer and pull down, rolling both the front and rear retainers out of the door frame. Repeat this on the other side.

3. Unclip and move the sun visors to the side.

4. Release the header latches and hooks from the loops on the windshield frame.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173

5. Open the swing gate. 6. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearward out of the swing gate brackets.

174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• Unzip the rear window starting at the right lower corner of the window. Pull the zipper up, across the top and down to the left lower corner. Zipper pulls will stay on the rear window. Pull down on the rear window to disengage from the zipper on the top cover. Stow the windows carefully to avoid scratch- ing.

7. Undo the Velcro威 that runs along the top and rear edge of the side window. 8. Beginning from the rear lower corner, completely unzip the window.

9. Once unzipped, remove side window retainers from the door channel and body side channel. Repeat this step on the opposite side.

10. Finish releasing the sail panel retainers from the body side channel at the rear corners of the vehicle.

11. Fold the sail panels so that they rest on top of the soft top.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175

NOTE: When releasing the sail panel retainers, it is helpful to pull down on the rear roof bow.

176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

12. The swing gate brackets do not need to be removed unless the hard top is being installed. To remove the swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in towards the vehicle to disengage.

13. Grasp the front side bow behind the header, and lift the top.

14. Fold back the front section of the top, and gently rest the header on top of the rear portion of the deck.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177

15. Fold the top material so that the plastic retainers form a “W” as shown. Enter the vehicle, and move the material into two folds.

178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

16. Release the side bows by pressing down on the latch above the front of the rear door. Push the top rearward to disengage. Repeat this step on the other side.

17. Grasp the folded side bows and slide the top along the door frame track to the rear door frame.

18. Before lowering the top, open the swing gate to prevent possible damage to the rear center high-mounted brake lamp. Gently slide the side bows off the door frame track and lower the top down into the vehicle.

20. Once the top is fully down, use the Velcro straps provided to secure the top to the vehicle by wrapping the strap around the side bows and through the slot on the body.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179

19. Tuck the fabric and the check straps between the bows as far inside as possible. This will keep any portion of the top from flapping outside of the vehicle.

21. Close the front header latches. 22. Remove door frames, Frame” in this section.

if desired. Refer to “Door

180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Putting Up The Soft Top

1 — Header Bow 2 — 2–Bow 3 — 3–Bow 4 — 4–Bow 5 — Sail Panel

6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window

11 — Plastic Retainer

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181

1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels

182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

NOTE: Be extremely careful when putting up the soft top to prevent the doors from getting scratched. It may be helpful to open the rear doors. 1. Install the door frames, if removed. Refer to “Door Frame” in this section. 2. Undo the straps used to secure the top in the down position and store in secure location. 3. Open the swing gate. 4. Grasp the folded side bows and lift to the top of the rear door frames.

5. Insert the slider feature of the knuckles into the door frame tracks and slide the top forward.

6. Ensure that the top locks into Sunrider locking mecha- nisms that are located above the front of the rear doors.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183

184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

7. Unclip and move the sun visors to the side. 8. Standing on the side of the vehicle, lift the top by the side bow until it rests on the windshield frame.

on the side bows above the front doors. They should cradle the tubing. Finally, make sure that the check strap (the long, woven strap reaching from the rear bow to the 2–bow) does not get entangled in any of the framework when unfolding the top.

9. Before attaching the header latches, be sure the top retainers above the doors do not get trapped between the top and the door frame. Also, make certain the feet at both ends of the 2–bow (forward most bow) seat properly

10. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185

over the channel until it snaps onto the exterior part of the rail. To be properly located, the bracket must only be clipped to the shortened rail edge.

11. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it rearward and

12. Move to the rear of the vehicle and gently pull the sail panels over the rear roof bow (4–bow).

186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

13. Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) towards the rear window loose (on both sides). Pulling down on the rear roof bow (4–bow) will aid to reach the channel with the retainers.

14. To install the side windows, affix the window tem- porarily by attaching to the Velcro威 in the upper rear corner. Start the zipper but close only about 1 in (2.5 cm).

15. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187

16. Continue closing the zipper only along the top edge of the window.

188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

17. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the Velcro威 along the top and rear of the window. Repeat this step for the opposite side.

18. Locate the black swing gate bar. Slide the swing gate bar over the receiver at the bottom inside of the rear window. The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed.

19. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189

21. Grasp the swing gate bar and position it into the swing gate brackets.

20. Run the first zipper fully around to the right side of the window.

22. Complete the installation of the sail panel by insert- ing the rest of the retainer into the body channel.

190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

23. Open the doors and insert the top retainers into the channels in the door frame above the doors, starting at the front and working toward the rear of the vehicle.

24. Ensure plastic retainer is tucked in properly at B-pillar, not pinching the seal.

25. Close the header latches and return the sun visors to their secured position.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191

FOLDING WINDSHIELD The fold-down windshield and removable side bars on your vehicle are structural elements that can provide some protection in some accidents. The windshield also provides some protection against weather, road debris and intrusion of small branches and other objects. Do not drive your vehicle on-road with the windshield down and the side bars removed as you lose the protec- tion these structural elements can provide. If required for certain off-road uses, the side bars can be removed and the windshield folded down. However, the protection afforded by these features is then lost. If you remove the side bars and fold down the windshield, drive slowly and cautiously. It is recommended that the speed of the vehicle be limited to 10 mph (16 km/h), with low range operation preferred, if you are driving off-road with the windshield folded down.

192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Raise the windshield and reinstall the side bars as soon as the task that required their removal is completed and before you return to on-road driving. Both you and your passenger should wear seat belts at all times, on-road and off-road, regardless of whether the windshield is raised or folded down. Outside rearview mirrors are mounted on the doors. If you choose to remove the doors, see your authorized dealer for a replacement cowl-mounted outside mirror. Federal law requires outside mirrors on vehicles for on-road use.

WARNING!

shield down.

times when the windshield is down.

securely fastened, either up or down.

Carefully follow these warnings to help protect against personal injury: • Do not drive your vehicle on-road with the wind- • Do not drive your vehicle unless the windshield is • Eye protection, such as goggles, should be worn at all • Be sure that you carefully follow the instructions for raising the windshield. Make sure that the folding windshield, windshield wipers, side bars, and all associated hardware and fasteners are correctly and tightly assembled before driving your vehicle. Failure to follow these instructions may prevent your vehicle from providing you and your passengers protection in some accidents. • If you remove the doors, store them outside the vehicle. In the event of an accident, a loose door may cause personal injury.

Lowering The Windshield And Removing Side Bars

1. Lower the fabric top or remove the hard top following