2013 Honda Pilot Owners Manual

u CHG SETTING appears on the display.

3. Press the SEL/RESET button to go into the

METER SETUP group.

4. Press the SEL/RESET button again.

u LANGUAGE SELECTION appears first

on the display.

Index

Home

94

* Not available on all models

uuGauges and DisplaysuMulti-Information Display*

5. Press the

button until TRIP A

INFO RESET appears on the display, then press the SEL/RESET button. u The display switches to the setup screen,

where you can select with REFUEL, MANUAL ONLY, IGN OFF, or EXIT.

QRG

TOC

6. Press the

button and select with REFUEL, then press the SEL/RESET button. u The with REFUEL setup screen appears, then the display returns to the customize item screen.

7. Press the

button until EXIT

appears on the display, then press the SEL/ RESET button.

8. Repeat Step 7 until you return to the

normal screen.

* Not available on all models

Index

Home

95

QRG

Index

Home

96

QRG

Controls

This chapter explains how to operate the various controls necessary for driving.

Setting the Clock ................................ 98
Locking and Unlocking the Doors

Key Types and Functions .................... 99
Locking/Unlocking the Doors from the Outside .......................................... 101
Locking/Unlocking the Doors from the Inside ............................................. 103
Childproof Door Locks ..................... 104
Auto Door Locking/Unlocking .......... 105
Opening and Closing the Tailgate... 110
Security System ................................ 118
Immobilizer System .......................... 118
Security System Alarm*.................... 118
Opening and Closing the Windows..... 120

Opening and Closing the Moonroof*...... 123
Operating the Switches Around the Steering Wheel Ignition Switch................................. 124
Turn Signals ..................................... 125
Light Switches.................................. 125
Fog Lights* ...................................... 127
Daytime Running Lights ................... 127
Wipers and Washers ........................ 128
Brightness Control ........................... 130
Rear Defogger/Heated Door Mirror* Button ........................................... 131
Driving Position Memory System* .... 132
Adjusting the Steering Wheel........... 134

Adjusting the Mirrors....................... 135
Interior Rearview Mirror ................... 135
Power Door Mirrors ......................... 136
Adjusting the Seats .......................... 137
Adjusting the Seat Positions............. 137

Interior Lights/Interior Convenience Items ................................................ 150
Interior Lights .................................. 150
Interior Convenience Items .............. 152
Climate Control System ................... 165
Using Automatic Climate Control .... 165
Automatic Climate Control Sensors ......170

* Not available on all models

Index

Home

97

Setting the Clock

Clock Models with audio/information screen You can adjust the time in the clock display, using the CLOCK button with the ignition switch in ON (w.

1. Press the CLOCK button to access the clock

adjustment mode screen.

2. Press

to select the item you want to adjust (12/24 hour mode, hour, minute).

3. Rotate 4. Press

to make the adjustment.

to enter your selection. Repeat

steps 2 to 4 to adjust other items.

5. To enter the selection, press

EXIT, then press

and select

1Clock

These indications are used to show how to operate the selector knob. Rotate Press

to select.

to enter.

You can also press the SETUP button to access the clock adjustment mode screen. 1. Press the SETUP button. 2. Rotate screen.

to select CLOCK ADJUST on the

3. Press

, CLOCK ADJUST appears.

Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.

QRG

TOC

Index

Home

98

Locking and Unlocking the Doors

Key Types and Functions This vehicle comes with the following keys:

■ Master Keys

Use the keys to start and stop the engine, and to lock and unlock all the doors and tailgate. You can also use the remote transmitter to lock and unlock the doors and tailgate.

Continued

1Key Types and Functions

All the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.

2 Immobilizer System P. 118

The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: • Do not leave the keys in direct sunlight, or in

locations with high temperature or high humidity. • Do not drop the keys or set heavy objects on them. • Keep the keys away from liquids. • Do not take the keys apart except for replacing the

battery.

If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work.

If the keys do not work properly, have them inspected by a dealer.

QRG

TOC

Index

Home

99

uuLocking and Unlocking the DoorsuKey Types and Functions

QRG

■ Valet Key

Can be used to start and stop the engine, and lock and unlock driver's door.

1Valet Key

When you need to leave a key with a third party, leave the valet key.

■ Key Number Tag

Contains a number that you will need if you purchase a replacement key.

1Key Number Tag

Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.

If you lose your key and you cannot start the engine, contact a dealer.

TOC

Index

Home

100

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

Locking/Unlocking the Doors from the Outside ■ Using the Remote Transmitter

LED

Unlock Button

■ Locking the doors Press the lock button. Once:

Lock Button

u Some exterior lights flash, all the doors

and tailgate lock, and the security system sets.

Twice (within five seconds after the first push):

u A beeper sounds and verifies the security

system is set.

■ Unlocking the doors Press the unlock button. Once:

u Some exterior lights flash twice, and the

driver's door unlocks.

Twice:

u The remaining doors and tailgate unlock.

Continued

1Using the Remote Transmitter

If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors will automatically relock.

Models with multi-information display You can change the relock timer setting.

2 Customized Features P. 90

If the interior light switch is in the door activated position, the interior lights come on when you press the unlock button. No doors opened: The lights fade out after 30 seconds. Doors relocked with the remote: The lights go off immediately.

2 Interior Lights P. 150

The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.

The remote will not lock the vehicle when a door or the tailgate is open.

If the distance at which it works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.

2 Replacing the Button Battery P. 424

Models with multi-information display You can customize the door unlock mode setting.

2 Customized Features P. 90

QRG

TOC

Index

Home

101

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

■ Locking/Unlocking the Doors Using a Key

Fully insert the key and turn it.

Lock

Unlock

■ Locking a Door Without Using a Key

■ Locking the driver's door Push the lock tab rearward a or push the master door lock switch in the lock direction b, and close the door.

■ Locking the passenger's doors Push the lock tab rearward and close the door.

■ Lockout prevention system The doors and the tailgate cannot be locked when the key is in the ignition switch, and any door or the tailgate is open.

QRG

TOC

Index

Home

102

1Locking/Unlocking the Doors Using a Key

When you lock the driver's door with a key, all of the other doors and tailgate lock at the same time. When unlocking, the driver's door unlocks first. Turn the key a second time within a few seconds to unlock the remaining doors and the tailgate.

Models with multi-information display You can customize the door unlock mode setting.

2 Customized Features P. 90

1Locking a Door Without Using a Key

When you lock the driver's door, all the other doors and tailgate lock at the same time. Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside

Locking/Unlocking the Doors from the Inside ■ Using the Lock Tab

To Lock

Lock Tab

To Unlock

■ Locking a door Pull the lock tab.

■ Unlocking a door Push the lock tab in.

■ Using the Master Door Lock Switch

To Lock

Press the master door lock switch in as shown to lock or unlock all doors and the tailgate.

To Unlock

Master Door Lock Switch

1Using the Lock Tab

When you lock/unlock either front door using the master door lock switch, tailgate, glass hatch, and all the other doors lock/unlock at the same time.

1Using the Master Door Lock Switch

When you lock/unlock the driver's door using the master door lock switch, all the other doors and the tailgate lock/unlock at the same time.

The front passenger's door also has the master door lock switch.

QRG

TOC

Index

Home

103

1Childproof Door Locks

To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position, lower the rear window, put your hand out of the window, and pull the outside door handle.

uuLocking and Unlocking the DoorsuChildproof Door Locks

QRG

Childproof Door Locks The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.

■ Setting the Childproof Door Locks

Slide the lever in the rear door to the lock position, and close the door.

■ When opening the door Open the door using the outside door handle.

Unlock

Lock

TOC

Index

Home

104

uuLocking and Unlocking the DoorsuAuto Door Locking/Unlocking

Auto Door Locking/Unlocking Your vehicle locks all doors and unlocks the driver’s door automatically when a certain condition is met.

■ Auto Door Locking ■ Drive lock mode All doors and the tailgate lock when the vehicle’s speed reaches about 10 mph (15 km/h).

■ Auto Door Unlocking ■ Park unlock mode The driver’s door unlocks when the shift lever is moved into (P with the brake pedal depressed.

QRG

1Auto Door Locking/Unlocking

Models without multi-information display You can turn off or change to another auto door locking/unlocking setting using the master door lock switch.

2 Customizing the Auto Door Locking/

Unlocking Setting* P. 106

Models with multi-information display You can turn off or change to another auto door locking/unlocking setting using the multi-information display.

2 Customized Features P. 90

TOC

* Not available on all models

Index

Home

105

uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*

QRG

Customizing the Auto Door Locking/Unlocking Setting* You can customize the auto door locking/unlocking setting to your liking using the master door lock switch.

■ List of the Auto Door Locking/Unlocking Customizable Options ■ Auto door locking

Mode

Description

Drive Lock Mode*1

All doors and the tailgate lock when the vehicle’s speed reaches about 10 mph (15 km/h).

Park Lock Mode

All doors and the tailgate lock when the shift lever is moved out of (P with the brake pedal depressed.

Off

The auto door locking is deactivated all the time.

Description

Driver’s door unlocks.*1

All doors and the tailgate unlock.

When the shift lever is moved into (P with the brake pedal depressed.

Driver’s door unlocks.

All doors and the tailgate unlock.

When the ignition switch is moved out of ON (w.

The auto door unlocking is deactivated all the time.

■ Auto door unlocking

Mode

Park Unlock Mode

Ignition Switch Unlock Mode

Off

*1: Default setting

* Not available on all models

TOC

Index

Home

106

uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*

■ Customizing Flow for Auto Door Locking Options

Steps

Drive Lock Mode*1

Park Lock Mode

Off

Apply the parking brake. Make sure the shift lever is in (P.

Turn the ignition switch to ON (w.

The driver’s door must be closed at this stage.

Open the driver’s door.

Move the shift lever out of (P with the brake pedal depressed.

−

Press and hold the front of the master door lock switch on the driver’s door for more than five seconds. Release the switch after you hear a click twice.

Press and hold the front of the master door lock switch on the driver’s door for more than five seconds. Release the switch after you hear one click.

Turn the ignition switch to ACCESSORY (q within 20 seconds.

Move the shift lever to (P.

−

−

Turn the ignition switch to LOCK (0 within 20 seconds.

u Customization is completed.

Turn the ignition switch to LOCK (0 within 20 seconds.

u Customization is completed.

Turn the ignition switch to LOCK (0 within 20 seconds.

u Customization is completed.

*1: Default setting

QRG

TOC

Index

Home

Continued

107

uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*

■ Customizing Flow for Auto Door Unlocking Options

Ignition Switch Unlock Mode

Park Unlock Mode

Steps

To unlock driver’s

door

To unlock all doors

and the tailgate

To unlock driver’s

door*1

To unlock all doors

and the tailgate

Off

Apply the parking brake. Make sure the shift lever is in (P.

Turn the ignition switch to ON (w.

The driver’s door must be closed at this stage.

Move the shift lever out of (P with the brake pedal depressed.

Open the driver’s door.

−

Press and hold the rear of the master door lock switch on the driver’s door for more than five seconds. You will hear a click twice.

Release the switch.

*1: Default setting

Keep pressing the switch for another five seconds to hear one more click.

Release the switch.

Keep pressing the switch for another five seconds to hear one more click.

Release the switch.

QRG

TOC

Index

Home

108

uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*

Ignition Switch Unlock Mode

Park Unlock Mode

Steps

To unlock driver’s door

To unlock all doors and

the tailgate

To unlock driver’s door*1

To unlock all doors and the tailgate

Off

Turn the ignition switch to ACCESSORY (q within 20 seconds.

u Customization is completed.

Move the shift lever to (P.

−

−

Turn the ignition switch to LOCK (0 within 20 seconds.

u Customization is completed.

Turn the ignition switch to LOCK (0 within 20 seconds.

u Customization is completed.

Turn the ignition switch to LOCK (0 within 20 seconds.

u Customization is

completed.

*1: Default setting

QRG

TOC

Index

Home

109

Opening and Closing the Tailgate

QRG

Precautions for Opening/Closing the Tailgate Always make sure individuals and objects are clear of the tailgate before opening or closing it.

■ Opening the tailgate • Open the tailgate all the way.

u If it is not fully opened, the tailgate may come down accidentally by its

own weight.

• Be careful when it is windy. The wind may cause the tailgate to close.

■ Closing the tailgate Keep the tailgate closed while driving to:

u Avoid possible damage. u Prevent exhaust gas from leaking into the vehicle. 2 Carbon Monoxide Gas P. 65

TOC

Index

Home

110

1Precautions for Opening/Closing the Tailgate

Models with power tailgate

3WARNING

Closing a power tailgate while anyone is in the path of the tailgate can cause serious injury.

Make sure everyone is clear before closing the tailgate.

Be careful not to hit your head on the tailgate or to put your hands between the tailgate and the cargo area when closing the tailgate.

When operating the power tailgate, make sure there is enough space around your vehicle. People near the tailgate may be seriously hurt if the tailgate hits or closes on their heads. Be especially cautious if children are around.

When you are storing or picking up luggage from the cargo area while the engine is idling, do not stand in front of the exhaust pipe. You may get burned.

Do not allow any passenger in the cargo space. They may get hurt during hard braking, a sudden acceleration, or a crash.

uuOpening and Closing the TailgateuOpening/Closing the Tailgate Using the Tailgate Release Button

Opening/Closing the Tailgate Using the Tailgate Release Button

When all the doors are unlocked, the tailgate is unlocked. Press the tailgate release button and lift open the tailgate.

Tailgate Release Button

Inner Handle

To manually close the tailgate, grab the inner handle, pull the tailgate down, and push it closed from outside.

QRG

TOC

Index

Home

111

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate *

QRG

Opening/Closing the Power Tailgate* The power tailgate can be operated by pressing the power tailgate button on the remote transmitter, pressing the power tailgate button on the driver's door, or pressing the button on the tailgate.

■ The power tailgate can be opened when: • The tailgate and glass hatch are fully closed.

• The shift lever is in (P.

TOC

• The key is not in the ignition switch when using the remote transmitter.

• You have changed the PTG KEYLESS OPEN MODE setting to WHEN

UNLOCKED, you need to unlock the tailgate before you press the tailgate button to open it.

2 Customized Features P. 90

■ The power tailgate can be closed when: • The tailgate is fully open.

• The key is not in the ignition switch when using the remote transmitter.

1Opening/Closing the Power Tailgate *

The power tailgate may not open or close under the following conditions: • The vehicle is parked on a steep hill. • The vehicle is swayed in a strong wind. • The tailgate or the roof is covered with snow or ice.

If you close the power tailgate when all the doors are locked, the power tailgate locks automatically.

If you replace the battery or the power tailgate fuse while the tailgate is open, the power tailgate may be disabled. The power tailgate resumes once you manually close the tailgate.

Installing aftermarket components other than genuine Honda accessories on the power tailgate may prevent it from fully opening or closing.

Make sure the power tailgate is fully open before you get your luggage in and out.

Make sure the power tailgate is fully closed before you start the vehicle.

Index

Home

112

* Not available on all models

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*

1Opening/Closing the Power Tailgate *

If the power tailgate meets resistance while opening or closing, the auto reverse feature reverses the direction. Three beeps sound.

The auto reverse function stops sensing when the tailgate is almost closed to make sure that it fully closes.

Do not touch the sensors located on both sides of the tailgate. The power tailgate does not close if you touch either sensor when you are trying to close the tailgate.

Be careful not to scratch the sensors with a sharp object. If scratched, they can be damaged, and the power tailgate closing feature malfunctions.

■ Remote Transmitter

Power Tailgate Button

Press the power tailgate button for more than one second to operate.

To reverse direction while the power tailgate is in operation, press the button again. The beeper sounds three times and the tailgate reverses direction.

■ Customizing when to open the tailgate ANYTIME: The power tailgate unlocks and opens at the same time. This is the default setting. WHEN UNLOCKED: The tailgate opens when all doors are unlocked. Models with multi-information display

2 Customized Features P. 90

Models without multi-information display To change the setting, do the following: 1. Apply the parking brake. 2. Turn the ignition switch to ON (w. 3. Press and hold the power tailgate button in the driver' s door until you

hear a beep.

4. Turn the ignition switch to OFF (0.

u When ANYTIME is set, you hear one long beep. u When WHEN UNLOCKED is set, you hear three short beeps.

* Not available on all models

Continued

QRG

TOC

Index

Home

113

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate *

■ Power Tailgate Button

Power Tailgate Button

To open or close the power tailgate, press the tailgate button in the driver's door for about one second. The beeper sounds and some exterior lights flash.

To reverse direction while the power tailgate is in operation, press the button again. The beeper sounds three times and the tailgate reverses direction.

■ Power Tailgate Close Button

Power Tailgate Close Button

Press the button on the tailgate to close the power tailgate. If you press the button again while the power tailgate is closing, it stops and reverses direction.

1Power Tailgate Close Button

If you push the power tailgate close button while the tailgate is automatically opening or closing, the power tailgate operation stops. Use caution if the tailgate stops in the middle of either operation. It may suddenly swing up or down.

* Not available on all models

QRG

TOC

Index

Home

114

■ Auto-Closer If you manually close the power tailgate, it latches automatically.

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*

1Auto-Closer

The auto-closer feature does not activate if you push the tailgate release button while the power tailgate is closing.

Do not put any force on the tailgate while the power tailgate is latching.

Keep your hands away from the tailgate when you manually close the tailgate and let it latch automatically. It is dangerous to put your hands around the tailgate as it starts to latch itself.

■ Power Tailgate Fail-safe Mode The power tailgate fail-safe mode detects if there is an extra load on the tailgate (for example, it is covered with snow). If an extra load is detected, the tailgate opens completely then lowers to the close position.

1Power Tailgate Fail-safe Mode

If you try to manually close the power tailgate immediately after it fully opens, the power tailgate fail-safe mode may activate.

Once the power tailgate fail-safe mode activates, wait until the power tailgate fully closes. Keep away from the power tailgate when it is in motion.

If the power tailgate fail-safe mode constantly activates, consult at a dealer.

QRG

TOC

Index

Home

115

uuOpening and Closing the TailgateuOpening/Closing the Glass Hatch

QRG

Opening/Closing the Glass Hatch The glass hatch can be operated by pressing the glass hatch release button * on the remote transmitter, pressing the glass hatch release button on the driver's door, or pressing the button on the tailgate.

1Opening/Closing the Glass Hatch

The rear wiper does not operate with the glass hatch open.

■ Opening the glass hatch • Open the glass hatch all the way.

TOC

u If it is not fully opened, the glass hatch may come down accidentally by

its own weight.

• Be careful when it is windy. The wind may cause the glass hatch to close.

■ Closing the glass hatch • To close the glass hatch, lower it and press on the handle until it latches.

• Keep the glass hatch closed while driving to:

u Avoid possible damage. u Prevent exhaust gas from leaking into the vehicle.

2 Carbon Monoxide Gas P. 65

Index

Home

116

* Not available on all models

uuOpening and Closing the TailgateuOpening/Closing the Glass Hatch

■ Remote Transmitter*

Glass Hatch Release Button

Press the glass hatch release button for more than one second to operate.

■ Glass Hatch Release Button*

To open the glass hatch, press the glass hatch release button in the driver' s door or press the button on the tailgate for about one second.

u The beeper sounds and some exterior

lights flash.

Glass Hatch Release Button

* Not available on all models

QRG

TOC

Index

Home

117

Security System

QRG

Immobilizer System The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key.

Pay attention to the following when inserting the key into the ignition switch: • Do not allow objects that emit strong radio waves near the ignition switch.

• Make sure the key is not covered by or touching a metal object.

• Do not bring a key from another vehicle's immobilizer system near the

ignition switch.

1Immobilizer System

NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle. Always take the ignition key with you whenever you leave the vehicle unattended.

Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.

Security System Alarm* The security system alarm activates when the doors, tailgate, glass hatch, or hood is opened without the key, or remote transmitter.

1Security System Alarm

The security alarm continues for a maximum of two minutes until the security system alarm deactivates.

■ When the security system alarm activates The horn sounds intermittently, and all the exterior lights flash.

■ To deactivate the security system alarm Unlock the vehicle using the key or remote transmitter. The system, along with the horn and flashing lights, is deactivated.

* Not available on all models

TOC

Index

Home

118

uuSecurity SystemuSecurity System Alarm*

■ Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: • The ignition switch is in LOCK (0, and the key has been removed from the

ignition switch.

• The hood and tailgate are closed. • All doors, the tailgate, and the glass hatch are locked with the key or the

remote transmitter.

■ When the security system alarm sets The security system alarm indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system alarm is set.

■ To cancel the security system alarm The security system alarm is canceled when the vehicle is unlocked using the key or remote transmitter. The security system alarm indicator goes off at the same time.

1Security System Alarm*

Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when: • Unlocking the door with the lock tab or the master

door lock switch.

If the battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key or remote transmitter.

Do not attempt to alter this system or add another device to it.

■ Panic Mode

PANIC Button

■ The PANIC button on the remote

transmitter

If you press the PANIC button for approximately one second, the following will occur for about 30 seconds: • The horn sounds. • Some exterior lights flash.

■ Canceling panic mode Press any button on the remote transmitter, or turn the ignition switch to ON (w. * Not available on all models

QRG

TOC

Index

Home

119

Opening and Closing the Windows

QRG

Opening/Closing the Power Windows The power windows can be opened and closed when the ignition switch is in ON (w, using the switches on the doors. The driver side switches can be used to open and close all of the windows.

The power window lock button on the driver side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the driver's seat.

When the power window lock button is pushed in, the indicator comes on and you can only operate the driver's window. Turn the power window lock button on when children are in the vehicle.

■ Opening/Closing Windows with Auto-Open/Close Function

ON OFF

Power Window Lock Button

Indicator Front Passenger’s Window Switch

Driver’s Window Switch

■ Automatic operation To open: Push the switch down firmly. To close: Pull the switch up firmly.

The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

■ Manual operation To open: Push the switch down lightly. To close: Pull the switch up lightly.

Release the switch when the window reaches the desired position.

TOC

Index

Home

120

1Opening/Closing the Power Windows

3WARNING

Closing a power window on someone's hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

The power windows can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.

Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.

The driver’s window auto reverse function is disabled when you continuously pull up the switch.

The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

■ Opening/Closing Windows without Auto-Open/Close Function

To open: Push the switch down. To close: Pull the switch up.

Release the switch when the window reaches the desired position.

Close

Open

■ Opening the Windows and Moonroof* with the Remote

Transmitter

To open: Press the unlock button twice within 10 seconds and hold it down for the second time. If the windows stop midway, repeat the procedure.

Unlock Button

* Not available on all models

Continued

QRG

TOC

Index

Home

121

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

■ Opening/Closing the Windows and Moonroof* with the Key

Close

Open

To open: Unlock the driver’s door with the key. Within 10 seconds of returning the key to the central position, turn the key in the unlock direction and hold it there.

To close: Lock the driver’s door with the key. Within 10 seconds of returning the key to the central position, turn the key in the lock direction and hold it there.

Release the key to stop the windows/ moonroof at the desired position. If you want further adjustment, repeat the same operation.

* Not available on all models

QRG

TOC

Index

Home

122

Opening and Closing the Moonroof *

■ Opening/Closing the Moonroof You can only operate the moonroof when the ignition switch is in ON (w. Use the switch in the front of the ceiling to open and close the moonroof.

■ Automatic operation To open: Pull the switch back firmly, then release. To close: Push the switch forward firmly, then release.

The moonroof will automatically open or close all the way. To stop the moonroof midway, touch the switch briefly.

■ Manual operation To open: Pull the switch back, and hold it until the desired position is reached. To close: Push the switch forward, and hold it until the desired position is reached.

■ Tilting the moonroof up To tilt: Push on the center of the moonroof switch. To close: Push the switch forward firmly, then release.

Open

Tilt

Close

* Not available on all models

1Opening/Closing the Moonroof

3WARNING

Opening or closing the moonroof on someone's hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the moonroof before opening or closing it.

NOTICE Opening the moonroof in below freezing temperature or when it is covered with snow or ice can damage the moonroof panel or motor.

The power moonroof can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.

When resistance is detected, the auto reverse function causes the moonroof to change directions, then stop. Auto reverse stops sensing when the moonroof is almost closed to ensure that it fully closes. Make sure that all objects, including fingers, are clear of the moonroof. You can use the remote transmitter or the key to operate the moonroof.

2 Opening the Windows and Moonroof*

with the Remote Transmitter P. 121
2 Opening/Closing the Windows and

Moonroof* with the Key P. 122

QRG

TOC

Index

Home

123

Operating the Switches Around the Steering Wheel

QRG

Ignition Switch

(0 LOCK: Insert and remove the key in this position.

(q ACCESSORY: Operate the audio system and other accessories in this position.

(w ON: This is the position when driving.

(e START: This position is for starting the engine. The switch returns to ON (w when you let go of the key.

1Ignition Switch

You cannot take the key out unless the shift lever is in (P.

If you open the driver's door when the key is in LOCK (0 or ACCESSORY (q, a warning buzzer will sound to remind you to take the key out. When this happens, the following messages appear on the multi-information display *: • In LOCK (0: REMOVE KEY • In ACCESSORY (q: REMOVE KEY The buzzer will

stop when you take the key out.

If the key won't turn from LOCK (0 to ACCESSORY (q, turn the key while moving the steering wheel left and right. The steering wheel will unlock, allowing the key to turn.

TOC

Index

Home

124

* Not available on all models

Turn Signals

Right Turn

Left Turn

Light Switches ■ Manual Operation

High Beams

Flashing the high beams

Low Beams

Turns on parking, side marker, tail, and rear license plate lights

Turns on headlights, parking, side marker, tail, and rear license plate lights

uuOperating the Switches Around the Steering WheeluTurn Signals

The turn signals can be used when the ignition switch is in ON (w.

1Light Switches

If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver’s door is opened.

Do not leave the lights on when the engine is off because it will cause the battery to discharge.

Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch. ■ High beams Push the lever forward until you hear a click. ■ Low beams When in high beams, pull the lever back to return to low beams. ■ Flashing the high beams Pull the lever back, and release it.

Continued

QRG

TOC

Index

Home

125

uuOperating the Switches Around the Steering WheeluLight Switches

■ Automatic Lighting Control

Automatic lighting control can be used when the ignition switch is in ON (w.

When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.

u You can change the auto light sensitivity

setting.

2 Customized Features P. 90

1Automatic Lighting Control

We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.

The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.

Light Sensor

■ Automatic Lighting Off Feature The headlights, all other exterior lights, and the instrument panel lights turn off within 15 seconds after you remove the key and close the driver's door.

u You can change the headlight auto off timer setting. 2 Customized Features P. 90

If you turn the ignition switch to LOCK (0 with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (three minutes, if the switch is in the AUTO position).

The lights turn on again when you unlock or open the driver's door. If you unlock the door, but do not open it within 15 seconds, the lights go off. If you open the driver's door, you will hear a lights on reminder chime.

Adjust the auto light sensitivity as follows:

Setting

The exterior lights come on when the ambient light is at

MAX HIGH MID LOW MIN

Bright

Dark

QRG

TOC

Index

Home

126

uuOperating the Switches Around the Steering WheeluFog Lights*

When the low beam headlights are on, turn the fog light switch on to use the fog lights.

1Fog Lights*

When the fog lights are on, the indicator in the instrument panel will be on.

Fog Lights*

Fog Light Switch

Daytime Running Lights The high beam headlights come on slightly dimmer than normal when the following conditions have been met: • The ignition switch is in ON (w.

• The headlight switch is off, or in

• The parking brake is released.

The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.

The high beam headlights return to the original brightness once the headlight switch is turned on.

* Not available on all models

QRG

TOC

Index

Home

127

uuOperating the Switches Around the Steering WheeluWipers and Washers

QRG

Wipers and Washers ■ Front Wiper/Washer

The windshield wipers and washers can be used when the ignition switch is in ON (w.

■ MIST The wipers run at high speed until you release the lever.

■ Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.

■ Adjusting the delay Turn the adjustment ring to adjust the wiper delay.

Long delay

Short delay

■ Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.

Pull to use washer.

Intermittent Time Adjustment Ring

TOC

MIST OFF INT: Low speed with

intermittent

LO: Low speed wipe HI: High speed wipe

Index

Home

128

1Wipers and Washers

NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.

NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.

Turn the washers off if no washer fluid comes out. The pump may get damaged.

If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. When the vehicle speeds up, the wiper operation’s shortest delay setting ( the same.

) and the LO setting become

uuOperating the Switches Around the Steering WheeluWipers and Washers

■ Rear Wiper/Washer

1Wipers and Washers

INT: Intermittent ON: Continuous wipe OFF Washer

The rear wiper and washer can be used when the ignition switch is in ON (w.

If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place.

■ Wiper switch (OFF, INT, ON) Change the wiper switch setting according to the amount of rain.

Rotate the wiper switch to OFF, and turn the ignition switch to ACCESSORY (q or LOCK (0, then remove the obstacle.

■ Washer ( Sprays while you rotate the switch to this position. Hold it to activate the wiper and to spray the washer. Once released, it stops operating after a few more sweeps.

The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes, once the circuit has returned to normal.

■ Operating in reverse When you shift the transmission to (R with the front wiper activated, the rear wiper operates automatically as follows even if its switch is off.

Front Wiper Position

Rear Wiper Operation

INT (Intermittent)

LO (Low speed wipe) HI (High speed wipe)

Intermittent

Continuous

QRG

TOC

Index

Home

129

When the ignition switch is in ON (w, you can use the brightness control knob to adjust instrument panel brightness. Brighten: Turn the knob to the right. Dim: Turn the knob to the left.

You will hear a beep when the brightness reaches minimum or maximum. The information display */multi-information display * will return to its original state several seconds after you adjust the brightness.

1Brightness Control

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

Pressing the (Select/Reset) knob or the (information) button * switches the display.

If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the exterior lights are on.

uuOperating the Switches Around the Steering WheeluBrightness Control

QRG

Brightness Control

Control Knob

TOC

Index

Home

130

On multi-information display

■ Brightness level indicator The brightness level is shown on the information display */multi-information display * while you are adjusting it.

On information display

* Not available on all models

uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror* Button

Rear Defogger/Heated Door Mirror* Button Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON (w.

The rear defogger and heated door mirrors automatically switch off after 15 minutes.

1Rear Defogger/Heated Door Mirror * Button

NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.

This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long period when the engine is idling. This may weaken the battery, making it difficult to start the engine.

* Not available on all models

QRG

TOC

Index

Home

131

1Driving Position Memory System*

Using the multi-information display, you can disable the automatic seat adjustment function.

2 Customized Features P. 90

The customize setting is also stored by the Driver 1 and 2 transmitters. What setting is recalled next time depends on which transmitter you use to unlock and open the driver's door.

uuOperating the Switches Around the Steering WheeluDriving Position Memory System*

QRG

Driving Position Memory System* You can store two driver’s seat and door mirror positions with the driving position memory system.

When you unlock and open the driver’s door with a remote transmitter, the seat and door mirrors adjust automatically to one of the two preset positions.