Login- Download PDF Manual
-
72
12 CR-Z-31SZT610.book 73 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message
High Temperature Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w.
● Blinks when the engine coolant temperature goes up, and stays on if the temperature continues to rise.
● Blinks while driving - Drive slowly to
prevent overheating.
● Stays on while driving - Immediately stop in a safe place and allow the engine to cool.
2 Overheating P. 297
IMA System Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w.
● Comes on if there is a problem
● Remains on or does not come on at all - Avoid high speed driving and have the vehicle checked by a dealer as soon as possible.
with the IMA system.
● Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
● Comes on along with a beep
when a problem is detected. A system message on the multi- information display appears at the same time.
System Message Indicator
2 If the IMA Indicator Comes On
P. 303
● While the indicator is on, press the
(information) button to see the
message again.
● Refer to the Indicators information in this chapter when a system message appears on the multi-information display. Take the appropriate action for the message. ● The multi-information display does not return to the normal screen unless the warning is canceled, or the
button is pressed.
—
Continued
73
12 CR-Z-31SZT610.book 74 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message
Low Temperature Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w.
● Comes on when the engine coolant temperature is low.
● If the indicator stays on after the engine
has reached normal operating temperature, there may be a problem with the temperature sensors. Have the vehicle inspected by a dealer.
U.S.
Canada
Side Airbag Off Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
● Comes on when the passenger
side airbag system is automatically shut off.
● It does not mean there is a problem with
your side airbags.
● Comes on when nobody is sitting in the passenger seat - Have the vehicle checked by a dealer.
● Comes on when someone is sitting in
the seat - Have the passenger sit properly.
—
U.S.
Canada
High Beam Indicator
● Comes on when the high beam
headlights are on.
—
—
74
12 CR-Z-31SZT610.book 75 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message
● The turn signal indicators blink
● Does not blink or blinks rapidly - A
when you operate the turn signal lever.
turn signal light bulb has blown. Change the bulb immediately.
● If you press the hazard warning button, both indicators and all turn signals blink at the same time.
2 Replacing Light Bulbs
P. 262, 263
● Comes on whenever the light
switch is on, or in AUTO when the exterior lights are on.
● If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver's door is opened.
● Comes on when the fog lights are
on.
● Indicates in which position your
shift lever is.
—
2 Shifting P. 203
● Comes on when the 7-speed shift
mode is applied.
2 7-Speed Manual Shift Mode P. 205
—
—
—
—
—
Turn Signal Indicators
Lights On Indicator
Fog Light Indicator *
Shift Lever Position Indicator *
M (7-speed manual shift mode) Indicator/Shift Indicator *
* Not available on all models
Continued
75
12 CR-Z-31SZT610.book 76 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message
● Comes on briefly when you turn the ignition switch to ON (w, then goes off.
● Comes on if the immobilizer
system cannot recognize the key information.
Immobilizer System Indicator
● Blinks - You cannot start the engine.
Turn the ignition switch to LOCK (0, pull the key out, and then insert the key and turn it to ON (w again.
● Repeatedly blinks - The system may be
malfunctioning. Have the vehicle checked by a dealer.
● Do not attempt to alter this system or
add other devices to it. Electrical problems can occur.
Security System Alarm Indicator
Indicator
● Blinks when the Security System
Alarm has been set.
2 Security System Alarm P. 105
CRUISE MAIN Indicator
● Comes on when you press the
CRUISE button.
2 Cruise Control P. 212
CRUISE CONTROL Indicator
● Comes on if you have set a speed
for cruise control.
2 Cruise Control P. 212
Auto Idle Stop Indicator
● Blinks when Auto Idle Stop is in
operation. The engine automatically shuts off.
2 Auto Idle Stop P. 225, 228
—
—
—
—
—
76
12 CR-Z-31SZT610.book 77 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message
Shift Up Indicator *
Shift Down Indicator *
SPORT Mode Indicator*1
NORMAL Mode Indicator*1
ECON Mode Indicator*1
● Comes on briefly when you turn
the ignition switch to ON (w. ● Comes on when shifting up is
recommended.
● Comes on briefly when you turn
the ignition switch to ON (w.
● Comes on when shifting down is
recommended.
● Comes on for a few seconds when you turn the ignition switch to ON (w.
● Comes on when you press the
SPORT mode button.
● Comes on for a few seconds when you turn the ignition switch to ON (w.
● Comes on when you press the
NORMAL mode button.
● Comes on for a few seconds when you turn the ignition switch to ON (w.
● Comes on when you press the
ECON mode button.
2 Shift Up/Down Indicators P. 209
—
2 3-Mode Drive System P. 211
2 3-Mode Drive System P. 211
2 3-Mode Drive System P. 211
*1:The driving mode message on the multi-information display appears for a few seconds when you press the appropriate mode button.
* Not available on all models
77
12 CR-Z-31SZT610.book 78 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsuMulti-Information Display Warning and Information Messages
Multi-Information Display Warning and Information Messages The following messages appear only on the multi-information display. Press the with the system message indicator on.
(information) button to see the message again
Message
Condition
Explanation
● Appears when the fuel fill cap is loose or is not
installed.
2 Tighten Fuel Cap Message P. 301
● Appears if there is a problem with the DRL system.
● Have your vehicle checked by a dealer.
2 Daytime Running Lights P. 112
Canadian models
● Appears when washer fluid gets low.
● Refill washer fluid.
2 Refilling Window Washer Fluid P. 257
● Appears when the scheduled maintenance is due
soon.
● Consequently, SERVICE DUE NOW and SERVICE
PAST DUE follow.
2 Maintenance Minder Messages on the Multi-
Information Display P. 241
● Appears when you open the driver’s door while the
● Turn the ignition switch to LOCK (0, then remove the
ignition key is in ACCESSORY (q.
key.
78
12 CR-Z-31SZT610.book 79 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsuMulti-Information Display Warning and Information Messages
Message
Condition
● Appears when the ignition key is turned to
ACCESSORY (q from ON (w. (The driver’s door is closed.)
Explanation
—
● Appears when you open the driver’s door while the
● Remove the key from the ignition switch.
ignition key is in LOCK (0.
● Appears if the clutch pedal is not fully depressed while
● Fully depress the clutch pedal.
the Auto Idle Stop is in operation, and the engine is ready to restart.
2 Auto Idle Stop P. 228
● Appears when the shift lever is in any forward gear position, and the Auto Idle Stop operating time has continued for a while.
● Shift to (N.
2 Auto Idle Stop P. 228
● Appears when the engine does not automatically
● Manually start the engine.
restart for the following reasons while the Auto Idle Stop is in operation. • The IMA battery charge is low. • There is a problem with the system.
2 Starting the Engine P. 198
Continued
79
12 CR-Z-31SZT610.book 80 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuIndicatorsuMulti-Information Display Warning and Information Messages
Message
Condition
Explanation
● Appears while you are customizing the settings for the
following reasons: Automatic transmission (CVT) models The shift lever is moved out of (P. Manual transmission models The parking brake is released.
2 Customized Features P. 90
80
12 CR-Z-31SZT610.book 81 ページ ２０１１年８月２９日 月曜日 午後８時８分
Gauges and Multi-Information Display
Gauges Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON (w.
1Gauges
■ Speedometer Displays your driving speed in mph or km/h.
■ Tachometer Shows the number of engine revolutions per minute.
■ Fuel Gauge Displays the amount of fuel left in the fuel tank.
Press and hold the kmh/mph change button until you hear a beep. The speedometer reading and the displayed measurements switch between mph and km/h. The display change message appears for a few seconds.
1Fuel Gauge
NOTICE You should refuel when the reading approaches Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
The actual amount of remaining fuel may differ from the fuel gauge reading.
■ Instant Fuel Economy Gauge Shows the instant fuel economy as a bar graph in mpg or l/100km.
1Instant Fuel Economy Gauge
Press and hold the km/mpg change button to switch the measurement.
Continued
81
12 CR-Z-31SZT610.book 82 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuGauges
■ IMA Battery Charge Level Indicator
IMA Battery Charge Level Indicator
The remaining battery charge level is displayed as a bar graph.
1IMA Battery Charge Level Indicator
The IMA battery charge level may decrease rapidly under the following conditions: • When the 12 volt battery has been replaced. • When the IMA battery has been disconnected. • When the IMA battery control system is correcting
its reading.
The charge level reading will be corrected automatically while driving.
CHRG Indicator ASST Indicator
■ Electric Motor Assist Indicator (ASST) The degree to which the electric motor is assisting the engine is displayed by the ASST indicator bar.
■ Battery Charge in Progress (CHRG) The degree to which the IMA battery is being charged is displayed by the CHRG indicator bar.
1Electric Motor Assist Indicator (ASST)
If the IMA battery is too hot or too cool, the IMA battery’s output power is limited to protect the battery. This disables the IMA assist and auto idle stop, even though the battery is well-charged.
It takes a short time to normalize the IMA battery’s output power depending on the weather.
82
12 CR-Z-31SZT610.book 83 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
Multi-Information Display The multi-information display shows the odometer, trip meter, outside temperature, and other gauges. It also displays important messages such as warnings and other helpful information.
■ Switching the Display
Press the display.
(information) button or the SEL/RESET button to change the
Eco Guide feedback with Eco Drive Bar
Average Fuel Economy Records
Average Fuel Economy A
Range
OFF
HFL *
Shown when Bluetooth® HandsFreeLink® is activated.
Elapsed Time
(Information) Button
SEL/RESET Button
* Not available on all models
Customizable Setting Entry
Engine Oil Life
Power Flow Monitor
Average Vehicle Speed
Continued
83
12 CR-Z-31SZT610.book 84 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
Odometer Outside temperature
Trip A
Trip B
■ Odometer Shows the total number of miles or kilometers that your vehicle has accumulated.
■ Trip Meter Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure 2 separate trips.
1Trip Meter
Switch between trip meter A and trip meter B by pressing the SEL/RESET button.
■ Resetting a trip meter To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to “0.0”.
84
12 CR-Z-31SZT610.book 85 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Outside Temperature Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■ Adjusting the outside temperature display Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.
2 Customized Features P. 90
1Outside Temperature
The temperature sensor is in the front bumper.Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be updated after the temperature reading has stabilized.
Use the multi-information display’s customized features to correct the temperature.
■ Range Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your trips in the past.
■ Elapsed Time Shows the time during one drive cycle.
1Elapsed Time
You can change the elapsed time reset criteria.
2 Customized Features P. 90
■ Average Speed Shows the average speed in mph or km/h since the last time Trip A was reset.
Continued
85
I
12 CR-Z-31SZT610.book 86 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Eco Assist Scoring (Real-Time Score)/Eco Guide Feedback
Leaf ICON
1st Stage
2nd Stage
3rd Stage
■ Real-Time score The Eco assist scoring system is a point system you can use to monitor your driving style and its impact on fuel economy. Points are represented by leaf icons on the multi- information display. Leaves are: • Accumulated when your driving style is fuel
efficient.
• Deducted when your style is not fuel
efficient.
■ Reset the system To clear all leaves and lifetime points, complete the following steps within 30 seconds, and do not run the engine. 1. Automatic transmission (CVT) models The shift lever must be in (P. Manual transmission models The parking brake must be set.
2. Turn the ignition switch to ON (w. 3. Make sure the NORMAL mode is selected. 4. Depress the brake pedal twice.
u The ambient meter color changes from blue to green. u When the METER COLOR CHANGE setting on the multi-information display is
1Reset the system
If the ECON mode is on in step 2, press the NORMAL mode button. Turn the ignition switch to LOCK (0, then go to step 1.
off, the color stays in blue. 5. Press the ECON mode button. 6. Press the NORMAL mode button.
u The ambient meter color turns off. 7. Turn the ignition switch to LOCK (0.
86
12 CR-Z-31SZT610.book 87 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Eco guide feedback with eco drive bar The bar extends to the right or left of the center line while driving. The more aggressive the acceleration is, the further the bar extends to the right. The more aggressive the deceleration is, the further the bar extends to the left. Keep the bar near the center line for better fuel economy while driving.
1Eco guide feedback with eco drive bar
Automatic transmission (CVT) models The ambient meter color changes corresponding to the level of eco drive bar extension.
Deceleration
Acceleration
High Fuel Economy
High Fuel Economy
Moderate Deceleration
Moderate Acceleration
Aggressive Deceleration
Aggressive Acceleration
Continued
87
12 CR-Z-31SZT610.book 88 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Average Fuel Economy Records
Latest Average Fuel Economy
Shows the average fuel economy for the last three driving cycles (1-3), and the current driving cycle (0) in mpg or l/100 km.
Each time you turn the ignition switch to ON (w, the display is updated, and the oldest record is deleted.
Past Average Fuel Economy
■ Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, its average fuel economy is also reset at the same time.
1Average Fuel Economy
You can choose whether to reset trip A and average fuel economy A when you refuel. 2 Customized Features P. 90
■ Engine Oil Life Shows the remaining oil life and Maintenance Minder ™.
2 Maintenance Minder™ P. 241
■ Bluetooth® HandsFreeLink® Shows your paired cell phone’s information.
2 Bluetooth® HandsFreeLink®
* P. 173
88
* Not available on all models
12 CR-Z-31SZT610.book 89 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Power Flow Monitor Displays engine and electric motor power flow – whether the system is assisting the engine or charging the battery.
1Power Flow Monitor
The displayed power flow may not correspond to the ASST/CHRG indicators directly.
2 Electric Motor Assist Indicator (ASST) P. 82
2 Battery Charge in Progress (CHRG) P. 82Power Flow
Engine Operation Icon
Operating
Not operating
Power is supplied with the engine and the electric motor is assisting the engine.
The electric motor is charging the IMA battery.
Power is supplied with only the engine.
Power is supplied with only the engine and the electric motor is charging the IMA battery.
Continued
89
12 CR-Z-31SZT610.book 90 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Customized Features Use the multi-information display to customize certain features. ■ How to customize Select the CUSTOMIZE SETTING screen by pressing the button while the ignition switch is in ON (w, the vehicle is at a complete stop, and the shift lever is in (P (CVT), and the parking brake is set (manual transmission). Press the SEL/RESET button to select CHG SETTING screen.
1Customized Features
To customize other features, press the SEL/RESET button on the CHG SETTING screen, then press the
button.
2 List of customizable options P. 92
2 Example for customizing settings P. 94When you customize settings: Automatic transmission (CVT) models Shift to (P.
Manual transmission models Set the parking brake.
Button
Press to change the customize menus and items.
SEL/RESET Button Press to set your selection.
90
12 CR-Z-31SZT610.book 91 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Customization flow Press the
button. CUSTOMIZE SETTINGS
SEL/RESET
CHG SETTING
SEL/RESET
METER SETUP
SEL/RESET
LANGUAGE SELECTION
DEFAULT ALL
ADJUST OUTSIDE TEMP. DISPLAY
TRIP A RESET with REFUEL
ELAPSED TIME RESET HOLD ECON MODE
METER COLOR CHANGE
DISPLAY KM/MILES
EXIT
LIGHTING SETUP
SEL/RESET
INTERIOR LIGHT DIMMING TIME
DOOR SETUP
SEL/RESET
SEL/RESET
EXIT
AUTO LIGHT SENSITIVITY*
Auto Light Sensitivity *
AUTO DOOR LOCK
AUTO DOOR UNLOCK
DOOR LOCK MODE
KEYLESS LOCK ACKNOWLEDGMENT
SECURITY RELOCK TIMER
* Not available on all models
Continued
91
12 CR-Z-31SZT610.book 92 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ List of customizable options
Setup Group
Customizable Features
Description
Language Selection
Changes the displayed language.
Adjust outside temp. display
Adjusts the temperature reading by a few degrees.
Selectable settings
English*1, French, Spanish
-5°F ~ ±0°F*1 ~ +5°F (U.S.)
-3°C ~ ±0°C*1 ~ +3°C (Canada)
Trip A Reset with Refuel
Sets Trip A and the average fuel economy to reset when you refuel.
ON, OFF*1
Meter Setup
Elapsed Time Reset
Changes the resetting conditions of the elapsed time.
IGN OFF*1, Trip A, Trip B
Hold ECON Mode
Maintains ECON mode.
Meter Color Change
Turns the ambient meter feature on and off.
ON, OFF*1
ON*1, OFF
Display Km/Miles
Changes the displayed measurement on the multi- information display.
AUTO*1, KM, MILES
Interior Light Dimming Time Changes the length of time the interior lights stay on
after you close the doors.
60 sec, 30 sec*1, 15 sec
Auto Light Sensitivity*2
Changes the timing for the headlights to come on. Max, High, Mid*1, Low, Min
Lighting Setup
*1: Default Setting *2: If equipped
92
12 CR-Z-31SZT610.book 93 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
Setup Group
Customizable Features
Description
Selectable settings
Auto Door Lock
Auto Door Unlock
Changes the setting for the automatic locking feature.
Shift from (P (A/T only), With VEH SPD*1, OFF
Changes the setting for when the doors and the hatch unlock automatically.
Shift to (P *2, IGN off*3, OFF
Driver Door*1, All Doors
Door Setup
Door Lock Mode
Sets up either the driver’s door or both doors and the hatch to unlock on the first push of the remote.
Key Lock Acknowledgment
LOCK/UNLOCK - The exterior lights flash LOCK (2nd push) - The beeper sounds
Driver Door*1
All Doors
ON*1, OFF
Security Relock Timer
Changes the time it takes for the doors and the hatch to relock and the security system to set after you unlock the vehicle without opening either door or the hatch.
90 sec, 60 sec, 30 sec*1
Default All
Sets/Cancels all the customized settings as default.
Set, Cancel
*1: Default Setting *2: Default Setting on automatic transmission (CVT) models *3: Default Setting on manual transmission models
Continued
93
12 CR-Z-31SZT610.book 94 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Example for customizing settings The steps for changing TRIP A RESET with REFUEL setting to ON are shown below. The default setting for TRIP A RESET with REFUEL is OFF.
button until
1. Press the
CUSTOMIZE SETTINGS appears on the display, then press the SEL/RESET button.
2. Press the SEL/RESET button.
3. Press the SEL/RESET button again.
94
12 CR-Z-31SZT610.book 95 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGauges and Multi-Information DisplayuMulti-Information Display
4. Press the
button until TRIP A
RESET with REFUEL appears on the display, then press the SEL/RESET button.
5. Press the
button and select ON,
then press the SEL/RESET button.
6. Press the
button until EXIT
appears in the display, then press the SEL/ RESET button.
7. Repeat step 6 until you return to the normal
screen.
95
12 CR-Z-31SZT610.book 96 ページ ２０１１年８月２９日 月曜日 午後８時８分
96
12 CR-Z-31SZT610.book 97 ページ ２０１１年８月２９日 月曜日 午後８時８分
This chapter explains how to operate the various controls necessary for driving.
Controls
Setting the Clock ................................ 98
Locking and Unlocking the DoorsKey Types and Functions .................... 99
Locking/Unlocking the Doors from the Outside .......................................... 100
Locking/Unlocking the Doors from the Inside ............................................. 102
Auto Door Locking/Unlocking .......... 103
Opening and Closing the Hatch....... 104
Security SystemImmobilizer System .......................... 105
Security System Alarm...................... 105
Opening and Closing the Windows..... 107Operating the Switches Around the Steering Wheel Ignition Switch................................. 109
Turn Signals ..................................... 110
Light Switches.................................. 110
Fog Lights* ...................................... 112
Daytime Running Lights ................... 112
Wipers and Washers ........................ 113
Brightness Control ........................... 115
Rear Defogger/Heated Door Mirror* Button ........................................... 116
Adjusting the Steering Wheel........... 117Adjusting the Mirrors
Interior Rearview Mirror ................... 118
Power Door Mirrors ......................... 118Adjusting the Seats
Adjusting the Seat Positions............. 119
Interior Lights/Interior Convenience Items Interior Lights .................................. 124
Interior Convenience Items .............. 125Climate Control System
Using Automatic Climate Control .... 132
Automatic Climate Control Sensors ......134* Not available on all models
97
12 CR-Z-31SZT610.book 98 ページ ２０１１年８月２９日 月曜日 午後８時８分
Setting the Clock
Clock Models without navigation system You can adjust the time in the clock display, using the CLOCK (AM/FM) button with the ignition switch in ON (w.
■ Adjusting the Time
(1 Button
(2 Button
(3 Button
Clock Display
CLOCK Button
1. Press and hold the CLOCK button until the clock display begins to blink. 2. Press the (1 (Hour) button to change the hours. 3. Press the (2 (Minute) button to change the minutes. 4. Press the CLOCK button to go back to the normal display.
98
1Clock
To set the time to the nearest hour: Press and hold the CLOCK button until the clock display begins to blink, then press the (3 (Reset) button.
Depending on the displayed time, the clock sets forward or backward. Example: 1:06 will reset to 1:00
1:53 will reset to 2:00Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
12 CR-Z-31SZT610.book 99 ページ ２０１１年８月２９日 月曜日 午後８時８分
Locking and Unlocking the Doors
Key Types and Functions This vehicle comes with the following keys:
■ Keys
Key with Remote Transmitter
Use the key to start and stop the engine, and to lock and unlock all the doors and hatch. You can also use the remote transmitter to lock and unlock the doors and hatch.
■ Key Number Tag
Contains a number that you will need if you purchase a replacement key.
1Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
2 Immobilizer System P. 105
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: • Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity. • Do not drop the keys or set heavy objects on them. • Keep the keys away from liquids. • Do not take the keys apart except for replacing the
battery.
If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer.
1Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.
If you lose your key and you cannot start the engine, contact a dealer.
99
12 CR-Z-31SZT610.book 100 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
Locking/Unlocking the Doors from the Outside ■ Using the Remote Transmitter
LED
Unlock Button
Lock Button
■ Locking the doors Press the LOCK button. Once:
uSome exterior lights flash, all the doors and hatch lock, and the security system sets.
Twice (within five seconds after the first push):
uA beeper sounds and verifies the security
system is set.
■ Unlocking the doors Press the UNLOCK button. Once:
uSome exterior lights flash twice, and the
driver's door unlocks.
Twice:
uThe passenger’s door and the hatch
unlock.
100
1Using the Remote Transmitter
If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors and the hatch will automatically relock. You can change the relock timer setting.
2 Customized Features P. 90
If the interior light switch is in the door activated position, the interior lights come on when you press the UNLOCK button. No doors opened: The lights fade out after 30 seconds. Doors relocked with the remote: The lights go off immediately.
2 Interior Lights P. 124
The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.
The remote will not lock the vehicle when a door or the hatch is open.
If the distance at which it works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.
2 Replacing the Battery P. 279
You can customize the door unlock mode setting.
2 Customized Features P. 90
12 CR-Z-31SZT610.book 101 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
■ Locking/Unlocking the Doors Using a Key
Fully insert the key and turn it.
Unlock
Lock
■ Locking a Door Without Using a Key
■ Locking the driver's door Pull the lock tab rearward a or push the master door lock switch in the lock direction b, and close the door.
■ Locking the passenger's door Pull the lock tab rearward and close the door.
1Locking/Unlocking the Doors Using a Key
When you lock the driver's door with a key, all the doors and hatch lock at the same time. When unlocking, the driver's door unlocks first. Turn the key a second time within a few seconds to unlock the passenger’s door and the hatch.
You can customize the door unlock mode setting.
2 Customized Features P. 90
1Locking a Door Without Using a Key
When you lock the driver's door, all the doors and hatch lock at the same time. Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.
■ Lockout prevention system The doors and the hatch cannot be locked when the key is in the ignition switch, and either door or the hatch is open.
101
12 CR-Z-31SZT610.book 102 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside
Locking/Unlocking the Doors from the Inside ■ Using the Lock Tab
To Lock
To Unlock
Lock Tab
■ Locking a door Pull the lock tab.
■ Unlocking a door Push the lock tab in.
1Using the Lock Tab
When you lock the door using the lock tab on the driver's door, the other door and hatch lock at the same time. When you unlock the door using the lock tab on the driver's door, only the driver's door will unlock.
■ Using the Master Door Lock Switch
Press the master door lock switch in as shown to lock or unlock both doors and the hatch.
1Using the Master Door Lock Switch
When you lock/unlock the driver's door using the master lock switch, all the doors and hatch lock/ unlock at the same time.
To Lock
To Unlock
Master Door Lock Switch
102
12 CR-Z-31SZT610.book 103 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuLocking and Unlocking the DoorsuAuto Door Locking/Unlocking
1Auto Door Locking/Unlocking
You can turn off or change to another auto door locking/unlocking setting using the multi-information display.
2 Customized Features P. 90
Auto Door Locking/Unlocking Your vehicle locks all doors and unlocks the driver’s door automatically when a certain condition is met.
■ Auto Door Locking ■ Drive lock mode The auto door lock function automatically locks all the doors and hatch when the vehicle reaches about 10 mph (15 km/h).
■ Auto Door Unlocking Automatic transmission (CVT) models ■ Park unlock mode The driver’s door unlocks when the shift lever is moved into (P with the brake pedal depressed. The settings can be changed to unlock all doors.
Manual transmission models ■ Ignition switch unlock mode The driver’s door unlocks when the ignition switch is moved out of ON (w. The settings can be changed to unlock all doors.
103
12 CR-Z-31SZT610.book 104 ページ ２０１１年８月２９日 月曜日 午後８時８分
Opening and Closing the Hatch
Precautions for Opening/Closing the Hatch ■ Opening the hatch Open the hatch all the way.
u If it is not fully opened, the hatch may come down accidentally by its own
weight.
■ Closing the hatch Keep the hatch closed while driving to:
uAvoid possible damage. uPrevent exhaust gas from leaking into the vehicle. 2 Carbon Monoxide Gas P. 64
Using the Hatch Release Button
Push the release button on the hatch after the doors are unlocked.
1Using the Hatch Release Button
When the driver's door is locked, the hatch will lock when it is closed.
Release Button
104
12 CR-Z-31SZT610.book 105 ページ ２０１１年８月２９日 月曜日 午後８時８分
Security System
Immobilizer System The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key.
Pay attention to the following when inserting the key into the ignition switch: • Do not allow objects that emit strong radio waves near the ignition switch. • Make sure the key is not covered by or touching a metal object. • Do not bring a key from another vehicle's immobilizer system near the ignition
switch.
Security System Alarm The security system alarm activates when the doors, hatch, or hood are opened without the key, or remote transmitter. It also activates if you turn the ignition switch to ON (w after locking the doors and the hatch with the remote transmitter.
■ When the security system alarm activates The horn sounds intermittently, and all of the exterior lights flash.
■ To deactivate the security system alarm Unlock the vehicle using the key or remote transmitter. The system, along with the horn and flashing lights, is deactivated.
1Immobilizer System
NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle. Always take the ignition key with you whenever you leave the vehicle unattended.
Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
1Security System Alarm
The security alarm continues for a maximum of two minutes until the security system alarm deactivates.
Continued
105
1Security System Alarm
Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when unlocking the door with the lock tab or the master door lock switch.
If the 12 volt battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key or remote transmitter.
Do not attempt to alter this system or add another device to it.
12 CR-Z-31SZT610.book 106 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuSecurity SystemuSecurity System Alarm
■ Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: • The ignition switch is in LOCK (0, and the key has been removed from the
ignition switch.
• The hood is closed. • Both doors and the hatch are locked with the key or the remote transmitter.
■ When the security system alarm sets The security system alarm indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system alarm is set.
■ To cancel the security system alarm The security system alarm is canceled when the vehicle is unlocked using the key or remote transmitter. The security system alarm indicator goes off at the same time.
■ Panic Mode
■ The panic button on the remote
transmitter
If you press the panic button for approximately one second, the following will occur for about 30 seconds: • The horn sounds. • Some exterior lights flash.
Panic Button
■ Canceling panic mode Press any button on the remote transmitter, or turn the ignition switch to ON (w.
106
12 CR-Z-31SZT610.book 107 ページ ２０１１年８月２９日 月曜日 午後８時８分
Opening and Closing the Windows
Opening/Closing the Power Windows The power windows can be opened and closed when the ignition switch is in ON (w, using the switches on the doors. The driver side switches can be used to open and close both windows.
The power window lock button on the driver side must be switched off (not pushed in) to open and close the passenger’s window from the passenger's side.
When the power window lock button is pushed in, you can only operate the driver's window. Turn the power window lock button on if a child rides in the passenger’s seat.
■ Opening/Closing Windows with Auto-Open/Close Function
Passenger’s Window Switch Driver’s Window Switch
Power Window Lock Button
ON OFF
■ Automatic operation To open: Push the switch down firmly. To close: Pull the switch up firmly.
The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.
■ Manual operation To open: Push the switch down lightly. To close: Pull the switch up lightly.
Release the switch when the window reaches the desired position.
1Opening/Closing the Power Windows
3WARNING
Closing a power window on someone's hands or fingers can cause serious injury.
Make sure your passenger is away from the window before closing it.
The power windows can be operated for up to 10 minutes after you turn the ignition switch off. Opening either door cancels this function.
Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.
The driver’s window auto reverse function is disabled when you continuously pull up the switch.
The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.
Continued
107
12 CR-Z-31SZT610.book 108 ページ ２０１１年８月２９日 月曜日 午後８時８分
