Login- Download PDF Manual
-
previous folder.
USB Indicator Comes on when a USB flash drive is connected.
Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.
(Power) Button
Press to turn the audio system ON and OFF.
Press
SEEK Buttons or
to change files.
SCAN Button You will get a 10-second sampling of each file. ● Press to sample all files in the current folder. ● Press two times to sample the first file in each of
the main folders.
● To turn off scan, press and hold the button.
*1:Only AAC format files recorded with iTunes® are playable on this unit.
AUX Button Press to select USB flash drive (if connected).
TITLE Button Press to display the text data.
RDM (Random) Button ● Press to play all files in random order. ● Press two times to play all files in the
current folder in random order.
● To turn off random, press and hold
the button.
RPT (Repeat) Button ● Press to replay a file continuously. ● Press two times to replay all files in the current folder. ● To turn off repeat, press and hold the button.
Continued
149
1Playing a USB Flash Drive
Use the recommended USB flash drives.
2 USB Flash Drives P. 171
Files in WMA format protected by digital rights management (DRM) are not played. The audio system displays “UNPLAYABLE FILE,” and then skips to the next file.
If there is a problem, you may see an error message on the display.
2 iPod®/USB Flash Drive P. 168
12 CR-Z-31SZT610.book 150 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio without Navigation SystemuPlaying a USB Flash Drive
■ How to Select a File from a Folder with the Selector Knob 1. Press 2. Rotate uPress
button to play the first file on the selected folder.
to switch the display to a folder list.
to select a folder.
3. Press 4. Rotate
to change the display to a list of files in that folder.
to select a file, then press
150
12 CR-Z-31SZT610.book 151 ページ ２０１１年８月２９日 月曜日 午後８時８分
Audio with Navigation System *
Audio System Basic Operation To use the audio system function, the ignition switch must be in ACCESSORY (q or ON (w.
■ Operation with the Control Icons To operate the audio system, press the control buttons on the side of the screen or touch the control icons on the audio screen.
Press the AUDIO button to show the audio screen.
To select any function, touch the appropriate icon on the screen.
AUDIO Button
■ How to access the disc slot or PC card slot
Press the OPEN button.
The screen folds back, and the CD and PC card slots appears.
* Not available on all models
Continued
1Audio System Basic Operation
Voice Control System The audio system is voice operable. See the navigation system manual for details.
1Operation with the Control Icons
AUDIO INFO Icon
On the navigation screen, touch the AUDIO INFO icon to see the selected audio information. Press any of the audio buttons to display the audio status bar at the bottom of the screen.
151
12 CR-Z-31SZT610.book 152 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uAudio System Basic Operation
PC Card Slot
(CD Eject) Button
Press to eject a CD.
Push the CLOSE button to return the screen to the upright position.
CD Slot
CLOSE Button
(PC Card Eject) Button
Press to eject a PC card.
■ Adjusting the sound
1Operation with the Control Icons
If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.
Do not use the folded down screen as a tray.
Press the AUDIO button, then touch the Sound icon.
1Adjusting the sound
When the adjustment level reaches the center, you will see "C" in the display.
Adjustable Settings:
Sound Mode
Sound Icon
Speaker Setting
The SVC has four modes: OFF, LOW, MID, and HIGH. SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.
The system automatically returns to the selected audio mode several seconds after you stop adjusting a setting.
Bass/Treble Setting
Speed-sensitive Volume Compensation
To adjust each setting, touch any setting icon such as FR or RR on the fader setting.
152
12 CR-Z-31SZT610.book 153 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uAudio System Basic Operation
■ Selecting the Background There are three backgrounds to choose from when displaying sound levels: Level: The sound level is shown with the vertical bars.
Spectrum Analysis: The sound level appears as ripples of water.
Off
Each time you touch the Background icon, the screen changes.
■ Operation with the Joystick
Joystick
Use the joystick to select an icon on the screen and access some audio functions.
Push left, right, up, or down to select an item.
Press to set your selection.
153
12 CR-Z-31SZT610.book 154 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying the AM/FM Radio
Playing the AM/FM Radio
VOL/PWR (Volume/Power) Knob Press to turn the audio system ON and OFF. Turn to adjust the volume.
FM1/FM2/AM Icon Touch to select a band.
Navigation Display
Joystick
AUTO SEL (Auto Select) Button Touch to scan both bands and store the strongest station in each preset. To turn off auto select, touch it again. This restores the presets you originally set.
TUNE Bar ● Press either side to select a station. ● Press and hold to search up and down the selected band for a station with a strong signal.
Preset Buttons (1-6) To store the station: 1. Tune to the selected station. 2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select a band, then press the preset button.
AM/FM Button Press to select a band. AUDIO Button Press to display the audio mode on the navigation screen.
SCAN Button Press to sample each of the strongest stations on the selected band for 10 seconds. To turn off scan, press the button again.
154
12 CR-Z-31SZT610.book 155 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying the AM/FM Radio
■ Auto Select Use the auto select feature to scan both bands and store the strongest station in each preset.
1Playing the AM/FM Radio
The STEREO indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available.
Touch AUTO SEL to activate the feature.
To turn off auto select, touch AUTO SEL again.
Switching the Audio Mode Press the MODE button on the steering wheel.
2 Audio Remote Controls P. 140
You can store six AM stations and twelve FM stations into the preset button memory. FM1 and FM2 let you store six stations each.
Auto Select function scans and stores up to six AM stations and twelve FM stations with a strong signal into the preset button memory.
If you do not like the stations auto select has stored, you can manually store your preferred frequencies.
155
12 CR-Z-31SZT610.book 156 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying a CD
Playing a CD Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3 or WMA format. With the CD loaded, press the CD/AUX button or touch the CD icon.
VOL/PWR (Volume/Power) Knob Press to turn the audio system ON and OFF. Turn to adjust the volume.
CD Icon Touch to play a CD.
Navigation Display
Joystick
CD/AUX Button Press to play a CD. AUDIO Button Press to display the audio mode on the navigation screen.
SCAN Button You will get a 10-second sampling of each song. ● Press to sample all tracks on
the CD (all files in the current folder in MP3 or WMA).
● Press two times to sample the first file in each folder on the CD (MP3 or WMA).
● To turn off scan, press and
hold the button.
156
(Rewind/Fast
Forward) Buttons Press and hold to move rapidly within a track/file.
Press to change tracks (files in MP3 or WMA).
(Skip) Buttons or
RDM (Random) Button ● Press to play all tracks/files on a CD
in random order.
● Press and hold to play all files in
the current folder (MP3 or WMA) in random order.
● To turn off random, press the
button again.
RPT (Repeat) Button ● Press to replay a track/file
continuously.
● Press and hold to replay all
files in the current folder (MP3 or WMA).
● To turn off repeat, press the
button again.
FOLDER Bar to skip to the Press next folder, and to skip to the beginning of the previous folder in MP3 or WMA.
12 CR-Z-31SZT610.book 157 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying a CD
■ How to Select a File from a List
1Playing a CD
NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.
WMA files protected by digital rights management (DRM) cannot be played. The audio system displays FILE ERROR, then skips to the next file.
1. Touch Track List to display a folder list.
Track List Icon
Folder List
2. Touch
3 4
to scroll through the list, and
touch an icon to select a folder.
Folder Icon
3. Scroll through the list and touch an icon to
select a file. uTouch Return to go back to the previous
screen.
uTouch the folder icon on the upper left to
move to the parent folder.
Return Icon
• Any songs not in a folder will automatically be added to the “Root” folder, which
is then displayed at the top of the Folder List.
• If the root folder has some additional folders in the lower layer, they will be listed
on the screen.
• To exit the list, press the AUDIO button.
157
12 CR-Z-31SZT610.book 158 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying a PC Card
Playing a PC Card Your audio system reads and plays audio files on a PC card in either MP3 or WMA format. Insert a PC card into the PC card slot, then press the CD/AUX button, or touch the AUX icon.
2 How to access the disc slot or PC card slot P. 151
VOL/PWR (Volume/Power) Knob Press to turn the audio system ON and OFF. Turn to adjust the volume.
Navigation Display
CD/AUX Button Press to play the PC card. AUDIO Button Press to display the audio mode on the navigation screen.
SCAN Button You will get a 10-second sampling of each song. ● Press to sample all files. ● Press and hold to sample the first file in each folder/artist/ album.
● To turn off scan, press the
button.
158
AUX Icon Touch to play the PC card.
PLAY MODE Icon Touch to select any of three modes (FOLDER, ARTIST, ALBUM).
Joystick
(Rewind/Fast
Forward) Buttons Press and hold to move rapidly within a track/file.
Press files.
(Skip) Buttons or
to change
RPT (Repeat) Button ● Press to replay a file
continuously.
● Press and hold to replay all
files in the current folder.
● To turn off repeat, press the
button again.
RDM (Random) Button ● Press to play all files in the current
folder in random order.
● Press and hold to play all files in
each folder/artist/album in random order.
● To turn off random, press the
button again.
FOLDER Bar to skip to the Press next folder, and to skip to the beginning of the previous folder.
12 CR-Z-31SZT610.book 159 ページ ２０１１年８月２９日 月曜日 午後８時８分
■ How to Select a Play Mode
PLAY MODE Icon
1. Touch PLAY MODE.
Folder mode is shown.
There are three play modes: Folder mode: Plays files in the order they are recorded to the PC card. Artist mode: Plays files in alphabetical order, by artist and song title. Album mode: Plays albums (folders) in alphabetical order.
2. Touch the play mode icon.
3. Touch either playing menu.
u Continue playing the current song goes into the selected play mode after playing the current file.
uuAudio with Navigation System *uPlaying a PC Card
1How to Select a Play Mode
Pressing the CANCEL button goes back to the previous screen. To exit the play mode screen, press the AUDIO button.
WMA format protected by digital rights management (DRM) cannot be played. The audio system skips to the next file.
If there is a problem with the PC card player, see a dealer.
Continued
159
12 CR-Z-31SZT610.book 160 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying a PC Card
■ How to Select a File from a List
1. Touch Track List.
1How to Select a File from a List
In artist mode, artist name list is shown.
Track List Icon
Folder mode is shown.
2. Touch an icon to select a file.
uTouch Return to go back to the previous
In album mode, album name list is shown.
screen.
uIn folder mode, touch the folder icon on
the upper left to move to the parent folder. uTouch
to scroll through the list.
3 4
160
12 CR-Z-31SZT610.book 161 ページ ２０１１年８月２９日 月曜日 午後８時８分
■ Song search You can search for a file with any of three modes: Title by Keyword, Artist, and Album. 1. Touch Song Search.
uuAudio with Navigation System *uPlaying a PC Card
1Song search
• Touch Return to go back to the previous screen. • In folder mode, touch the folder icon on the upper
left to move to the parent folder.
• Touch
3 4
to scroll through the list.
Folder mode is shown.
Return Icon Song Search Icon
In Title by Keyword mode, touch the letter icons to enter the title name or any keyword. Touch List to begin the song search.
2. Touch any icon from the three song search
items.
3. Select a song from the list, then touch an
icon.
Delete icon: Touch to cancel the selected letter. More icon: Touch to show the other character list.
Press the CANCEL button to exit the song search mode.
161
12 CR-Z-31SZT610.book 162 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying an iPod®
Playing an iPod® Connect the iPod® using your dock connector to the USB adapter cable, then press the CD/AUX button or touch the USB icon.
2 USB Adapter Cable P. 137
VOL/PWR (Volume/Power) Knob Press to turn the audio system ON and OFF. Turn to adjust the volume.
CD/AUX Button Press to play an iPod®. AUDIO Button Press to display the audio mode on the navigation screen. The display shows the current file number and total of playable files.
USB Icon Touch to play an iPod®.
Navigation Display
Joystick
(Rewind/Fast
Forward) Buttons Press and hold to move rapidly within a track/file.
Press files.
(Skip) Buttons or
to change
RPT (Repeat) Button ● Press to replay a file continuously. ● To turn off repeat, press the
button again.
RDM (Random) Button ● Press to play all available files in a selected list
(playlists, artists, albums or songs) in random order.
● Press and hold to play all available albums in a
selected list (playlists, artists, albums or songs) in random order.
● To turn off shuffle mode, press the button again.
162
12 CR-Z-31SZT610.book 163 ページ ２０１１年８月２９日 月曜日 午後８時８分
■ How to Select a File from the iPod Menu 1. Touch iPod MENU.
iPod MENU Icon
2. Touch any of the mode icons (Playlists,
Artists, Albums, and Songs).
uuAudio with Navigation System *uPlaying an iPod®
1Playing an iPod®
Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.
If there is a problem, you may see an error message on the display.
2 iPod®/USB Flash Drive P. 168
Voice Control System You can select the AUX mode by using the navigation system voice control buttons, but you cannot operate the play mode functions by voice.
Pressing the CANCEL button goes back to the previous screen. To exit the play mode screen, press the AUDIO button.
3. Touch an item on the displayed list.
uTouch Return to go back to the previous
screen. uTouch
3 4
to scroll through the list.
Continued
163
12 CR-Z-31SZT610.book 164 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying an iPod®
■ How to Select a File from a Track List
1. Touch Track List.
2. Touch an item on the displayed list.
uTouch Return to go back to the previous
screen. uTouch
3 4
to scroll through the list.
Track List Icon
164
12 CR-Z-31SZT610.book 165 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying a USB Flash Drive
Playing a USB Flash Drive Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC*1 format. Connect your USB flash drive to the USB adapter cable, then press the CD/AUX button or touch the USB icon. 2 USB Adapter Cable P. 137
VOL/PWR (Volume/Power) Knob Press to turn the audio system ON and OFF. Turn to adjust the volume.
Navigation Display
CD/AUX Button Press to play a USB flash drive. AUDIO Button Press to display the audio mode on the navigation screen.
SCAN Button You will get a 10-second sampling of each song. ● Press to sample all files in the
current folder.
● Press to sample the first file in
main folder.
● To turn off scan, press the
button again.
USB Icon Touch to play a USB flash drive.
Joystick
(Rewind/Fast
Forward) Buttons Press and hold to move rapidly within a track/file.
Press files.
(Skip) Buttons or
to change
RDM (Random) Button ● Press to play all files in random order. ● Press and hold to play all files in the
current folder in random order.
● To turn off random, press the button
again.
RPT (Repeat) Button ● Press to replay a file
continuously.
● Press and hold to replay all
files in the current folder.
● To turn off repeat, press the
button again.
FOLDER Bar to skip to the Press next folder, and to skip to the beginning of the previous folder.
*1: Only AAC format files recorded with iTunes® are playable on this unit.
Continued
165
1Playing a USB Flash Drive
Use the recommended USB flash memory devices.
2 USB Flash Drives P. 171
Files in WMA format protected by digital rights management (DRM) are not played. The audio system displays UNPLAYABLE FILE, and then skips to the next file.
If there is a problem, you may see an error message on the display.
2 iPod®/USB Flash Drive P. 168
12 CR-Z-31SZT610.book 166 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio with Navigation System *uPlaying a USB Flash Drive
■ How to Select a File from a List
1. Touch Track List.
Track List Icon
Folder List
2. Touch
3 4
to scroll through the list, and
touch an icon to select a folder.
Folder List
3. Scroll through the list and touch an icon to
select a file. uTouch Return to go back to the previous
screen.
uTouch the folder icon on the upper left to
move to the parent folder.
Return Icon
• If a song is not in a folder, it automatically goes to a “Root” folder, which is at the
top of the Folder List.
• If the root folder has additional folders in the lower layer, they will be listed on the
screen.
• To exit the list, press the AUDIO button.
166
12 CR-Z-31SZT610.book 167 ページ ２０１１年８月２９日 月曜日 午後８時８分
Audio Error Messages
CD Player If a disc error occurs, you may see the following error messages.
Error Message
Cause
Solution
HEAT ERROR
High temperature
UNSUPPORTED
Track/file format not supported
BAD DISC PLEASE CHECK OWNERS MANUAL PUSH EJECT
MECH ERROR
Mechanical error
CHECK DISC
Disc error
● Turn the audio system off and allow the player to cool down until
the error message is cleared.
● Current track/file will be skipped. The next supported track/file
plays automatically.
● Press the
(eject) button and remove the disc, and check that the
error message is cleared.
● Check that the disc is not damaged or deformed, and insert the
disc again.
2 Protecting CDs P. 170
● If the error message reappears, press the
button, and pull out
the disc.
● Insert a different disc.
If the new disc plays, there is a problem with the first disc.
● If the error message repeats, or the disc cannot be removed,
contact your dealer. Do not try to force the disc out of the player.
● Check that the disc is not damaged or deformed.
2 Protecting CDs P. 170
167
12 CR-Z-31SZT610.book 168 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuAudio Error MessagesuiPod®/USB Flash Drive
iPod®/USB Flash Drive If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.
Error Message
USB ERROR
BAD USB DEVICE PLEASE CHECK OWNERS MANUAL
iPod NO SONG
UNSUPPORTED VER.
Solution
Appears when there is a problem with the USB adapter unit. Check if the device is compatible with the USB adapter unit.
Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.
Appears when the iPod® is empty. Check that compatible files are stored on the device.
Appears when an unsupported iPod® is connected. If it appears when a supported iPod® is connected, update the iPod® software to the newer version.
CONNECT RETRY
Appears when the system does not acknowledge the iPod®. Reconnect the iPod®.
UNPLAYABLE FILE
USB NO SONG
UNSUPPORTED
Appears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about 3 seconds, then plays the next song.
Appears when the USB flash drive is empty or there are no MP3, WMA, or AAC files in the USB flash drive. Check that compatible files are stored on the device.
Appears when an unsupported device is connected. If it appears when the supported device is connected, reconnect the device.
168
12 CR-Z-31SZT610.book 169 ページ ２０１１年８月２９日 月曜日 午後８時８分
General Information on the Audio System
Recommended CDs • Use only high-quality CD-R or CD-RW discs labeled for audio use. • Use only CD-R or CD-RW discs on which the recordings are closed. • Play only standard round-shaped CDs.
The CD packages or jackets should have one of these marks.
■ CDs with MP3 or WMA files • Some software files may not allow for audio play or text data display. • Some versions of MP3 or WMA formats may be unsupported.
1Recommended CDs
A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.
Continued
169
12 CR-Z-31SZT610.book 170 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGeneral Information on the Audio SystemuRecommended CDs
■ Protecting CDs Follow these precautions when handling or storing CDs: • Store a CD in its case when it is not being played. • When wiping a CD, use a soft clean cloth from the center to the outside edge. • Handle a CD by its edge. Never touch either surface. • Never insert foreign objects into the CD player. • Keep CDs out of direct sunlight and extreme heat. • Do not place stabilizer rings or labels on the CD. • Avoid fingerprints, liquids, and felt-tip pens on the CD.
1Protecting CDs
NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.
Examples: ● Bubbled, wrinkled, labeled, and
excessively thick CDs
Bubbled/ Wrinkled
With Label/ Sticker
Using Printer Label Kit
170
Sealed
With Plastic Ring
● Damaged CDs
● Poor quality
CDs
Warped
Burrs
Chipped/ Cracked
● Small CDs
3-inch (8-cm) CD
12 CR-Z-31SZT610.book 171 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGeneral Information on the Audio SystemuCompatible iPod® and USB Flash Drives
Compatible iPod® and USB Flash Drives ■ iPod® Model Compatibility
Model
iPod ® (5th generation)
iPod classic ® 80GB/160GB
iPod classic ® 120GB
iPod classic ® 160GB (launch in 2009)
iPod nano ® iPod touch ®
1iPod® Model Compatibility
This system may not work with all software versions of these devices.
■ USB Flash Drives • Use a recommended USB flash drive of 256 MB or higher. • Some digital audio players may not be compatible. • Some USB flash drives (e.g., a device with security lockout) may not work. • Some software files may not allow for audio play or text data display. • Some versions of MP3, WMA, or AAC formats may be unsupported.
1USB Flash Drives
Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.
171
12 CR-Z-31SZT610.book 172 ページ ２０１１年８月２９日 月曜日 午後８時８分
uuGeneral Information on the Audio SystemuRecommended PC Card
Recommended PC Card Based on PCMCIA 2.1/JEIDA 4.2: CompactFlash Flash ATA SD memory card
Always use the recommended memory card with the appropriate adapter (if an adapter is needed). Some memory cards will not work in this unit.
■ Protecting PC card • Do not leave the PC card in the vehicle. Direct sunlight and high temperatures
may damage it.
• Make sure to put a PC card straight into the slot. • Do not insert anything other than a PC card into the slot. • Do not close the screen (move it to the upright position) until the PC card is
inserted all the way into its slot or is removed.
• We recommend backing up your data before using the device in your vehicle. • Never insert foreign objects into the PC card slot.
172
12 CR-Z-31SZT610.book 173 ページ ２０１１年８月２９日 月曜日 午後８時８分
Bluetooth® HandsFreeLink®
Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle's audio system, without handling your cell phone.
Using HFL ■ HFL Buttons
Volume up
Volume down
(HFL Talk) Button
(HFL Back) Button
Navi Voice Control Buttons
Microphone
Button: Press to give a command or answer a call. Button: Press to end a call, go back to the previous command, or cancel a
command.
* Not available on all models
Continued
1Bluetooth® HandsFreeLink®
To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • U.S.: Visit www.handsfreelink.honda.com, or call
(888) 528-7876.
• Canada: Visit www.handsfreelink.ca, or call (888)
9-HONDA-9.
Voice control tips • Adjust or close the vents and all windows, as noise
coming from them may interfere with the microphone.
• Press and release the
button before giving a
command. Speak clearly and naturally after a beep. • If the microphone picks up voices other than yours,
the command may be misinterpreted.
• A command that consists of several words can be spoken together. For example, say "Call 123-456- 7890" at once.
• When HFL is in use, navigation voice commands
cannot be recognized.
• To change the volume level, use the audio system's volume knob or the remote audio controls on the steering wheel.
173
12 CR-Z-31SZT610.book 174 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uUsing HFL
■ Help Features • To hear general HFL information and help, say “Tutorial.” • Say “Hands-free help” or “Help” any time to get help or hear a list of commands.
The multi-information display notifies you when there is an incoming call.
■ HFL Status Display
Signal Strength
HFL Mode
Battery Level Status
Roam Status
Phone Dialing
1Bluetooth® HandsFreeLink®
Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
1HFL Status Display
The information that appears on the multi- information display varies between phone models.
You can change the system language to English, French, or Spanish.
2 Customized Features P. 90
174
* Not available on all models
12 CR-Z-31SZT610.book 175 ページ ２０１１年８月２９日 月曜日 午後８時８分
HFL Menus The ignition switch must be in ACCESSORY (q or ON (w to use HFL.
uu Bluetooth® HandsFreeLink®
*uHFL Menus
1HFL Menus
To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.
Continued
175
12 CR-Z-31SZT610.book 176 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
176
12 CR-Z-31SZT610.book 177 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ Phone Setup ■ To pair a cell phone 1. If no phone has been paired to the system before, HFL gives you information
about how to pair the first phone. If a phone has already been paired: say “Phone Setup” and “Pair” after the HFL prompts.
2. Follow the HFL prompts and put your phone in discovery or search mode.
u HFL gives you a four-digit code and begins searching for your phone.
3. When your phone finds a Bluetooth® device, select HFL from the options and
enter the four-digit code.
4. Follow the HFL prompts and name the newly paired phone.
■ To rename a paired phone 1. Say “Phone Setup.” 2. Say “Edit” after the prompts. 3. Follow the HFL prompts and rename the phone.
u If there is more than one phone paired to the system, HFL asks you which
phone’s name you want to change.
1Phone Setup Press the giving a command.
button and wait for a beep before
Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.
Phone Pairing Tips: • You cannot pair your phone while the vehicle is
moving.
• Your phone must be in the discoverable or search
mode when pairing the phone. Refer to your phone's manual.
• Up to six phones can be paired. • Your phone's battery may drain faster when it is
paired to HFL.
• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.
■ To delete a paired phone 1. Say “Phone Setup.” 2. Say “Delete” after the prompts. 3. Follow the HFL prompts.
u HFL asks you which phone you want to delete.
Continued
177
12 CR-Z-31SZT610.book 178 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ To hear the name of all paired phone 1. Say “Phone Setup.” 2. Say “List” after the prompts. 3. HFL reads out all the paired phone’s names.
■ To hear which paired phone is currently linked 1. Say “Phone Setup.” 2. Say “Status” after the prompts. 3. HFL tells you which phone is linked with the system.
1Phone Setup
If no other phones are found or paired when trying to switch to another phone, HFL informs you that the original phone is linked again.
The “Status” and “Next Phone” commands use: Only one paired phone at a time can be linked to HFL. When there are two or more paired phones in the vehicle, the first paired phone that the system finds is linked.
■ To change the currently linked phone 1. Say “Phone Setup.” 2. Say “Next Phone” after the prompts. 3. HFL disconnects the current phone, and searches for another paired phone. 4. Once another phone is found, it is connected to the system. HFL informs you
which phone is now linked.
■ To change the pairing code setting 1. Say “Phone Setup.” 2. Say “Set Pairing Code” after the prompts. 3. If you want HFL to create a random code each time you pair a phone, say
“Random.” If you want to create your own four-digit code, say “Fixed.”
4. Follow the HFL prompts.
178
12 CR-Z-31SZT610.book 179 ページ ２０１１年８月２９日 月曜日 午後８時８分
■ Making a Call You can make calls using any phone number or a name in the HFL phonebook, and redial the last number called. Models with navigation system You can make calls using the Cellular Phonebook (if your phone is compatible with this feature), or entering the phone number on the screen.
■ Direct dialing a phone number 1. Say “Call” or “Dial.” 2. Say the number you want to dial after the prompts. 3. Say “Call” or “Dial” after the prompts.
■ From the HFL phonebook 1. Say “Call” or “Dial.” 2. Say the name stored in the HFL phonebook after the prompts. 3. Follow the HFL prompts.
■ To redial the last number called by HFL Say “Redial.”
■ To end a call Press the
(HFL back) button.
uu Bluetooth® HandsFreeLink®
*uHFL Menus
1Making a Call
Press the giving a command.
button and wait for a beep before
HFL uses a Class 2 Bluetooth, with has a maximum range of about 30 feet (10 meters).
HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle's 12 volt battery.
Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.
Continued
179
12 CR-Z-31SZT610.book 180 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ From the cellular phonebook *
1Making a Call
1. Press the INFO button, then select Cellular
Phonebook.
You need to enter the PIN first if the phonebook is PIN-protected.
2. Select Search Imported Phonebook.
2 PIN P. 187
3. Select a phonebook.
4. Enter the keyword (the first letter) for either the first or last name to search for a specific name in the phonebook, or touch the List icon to list all entries.
List Icon
180
* Not available on all models
12 CR-Z-31SZT610.book 181 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
5. Select a person from the search result list,
1Making a Call
and select the phone number. u If you have stored more than one phone
Once you select the phone number, the system starts dialing it.
number for that person on your cell phone, select the phone number you want to call from the category icons displayed next to the person’s name.
If you choose Store In HandsFreeLink, you can add the number to the HFL phonebook. The number stored in HFL can be dialed by a voice tag.
2 Store a number in HFL P. 186
■ Using a phone number (Navigation screen)
1. Press the INFO button, then select Cellular
Phonebook.
2. Select Dial. 3. Enter a phone number. 4. Select CALL to make the call.
Continued
181
12 CR-Z-31SZT610.book 182 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ Receiving a Call Press the button to hang up. When there is an incoming call, a call notification (if activated) sounds and a message appears on the display.
button to answer the call, or the
1Receiving a Call Call Waiting Press the answer the incoming call.
button to put the current call on hold to
■ Transferring a Call You can transfer a call from HFL to your phone, or from your phone to HFL. Press the
button and say “Transfer.”
■ Muting a Call To mute or unmute your voice during a call, press and release the “Mute.”
button and say
Press the call.
button again to return to the current
Ignore the incoming call if you do not want to answer it.
Press the current and answer the incoming call.
button if you want to hang up the
182
12 CR-Z-31SZT610.book 183 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ Sending Numbers or Name During a Call You can send numbers and names during a call. This is useful when calling a menu- driven phone system.
1Sending Numbers or Name During a Call
Press the
button before a command.
To send a
, say "Pound." To send a
, say "Star."
■ To send a number or name during a call 1. Say “Send.” 2. Say the number or name you want to send after the prompts. 3. Follow the HFL prompts.
■ HFL Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store can be account numbers or passwords. These numbers can be sent to a menu-driven call.
1HFL Phonebook
• Avoid using duplicate name entries. • Avoid using "home" as a name entry. • It is easier for HFL to recognize a multisyllabic or
longer name. For example, use "Peter" instead of "Pete," or "John Smith" instead of "John."
■ To store a phonebook entry 1. Say “Phonebook.” 2. Say “Store” after the prompts. 3. Say a name you want to list as your phonebook entry. 4. Say the number you want to store for the name entry. 5. Follow the HFL prompts and say “Enter” to store the entry.
■ To edit the number stored for a name 1. Say “Phonebook.” 2. Say “Edit” after the prompts. 3. Say a name you want to edit. When asked, say the new number for that name. 4. Follow the HFL prompts and say “Enter” to store the entry.
Continued
183
12 CR-Z-31SZT610.book 184 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ To delete a name 1. Say “Phonebook.” 2. Say “Delete” after the prompts. 3. Say a name you want to delete. 4. Say “Yes,” and follow the HFL prompts.
■ To list all names in the phonebook 1. Say “Phonebook.” 2. Say “List” after the prompts. 3. HFL begins reading the names in the order they were stored. 4. When you hear a name you want to call, say “Call.”
■ To store a specific phone number from your cell phone directly to the HFL
phonebook *
1. Say “Phonebook.” 2. Say “Receive Contact” after the prompts. 3. Follow the HFL prompts, select a number from your cell phone, and send it to HFL.
u If it is not the number you want to store, say “Discard.”
4. Say the name for that number. 5. Follow the HFL prompts to continue.
184
* Not available on all models
12 CR-Z-31SZT610.book 185 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ Cellular Phonebook Option* The cellular phonebook can store around 1,000 names and 10,000 phone numbers imported from a paired cell phone’s phonebook. The amount of names and numbers that can be stored varies by data size.
Press the INFO button, and select Cellular Phonebook. There are five options.
1HFL Phonebook
For a list of cell phones that are compatible with this feature: • U.S.: Visit www.handsfreelink.honda.com, or call
(888) 528-7876.
• Canada: Visit www.honda.ca, or call (888)
9-HONDA-9.
■ Import cellular phonebook Once you select this option, the system begins importing the phonebook from the paired cell phone. Select OK after the import is completed.
Imported Phonebook
Pin Icon
■ Search imported phonebook You can search the phone numbers by the person’s name. 1. Select Search Imported Phonebook, and
a list of imported phonebooks appears. 2. Select a phonebook you want to search.
u If the phonebook is PIN-protected, enter
Imported Date
the PIN. 2 PIN P. 187
* Not available on all models
Continued
185
12 CR-Z-31SZT610.book 186 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
3. Enter the keyword (the first letter) for the
1Cellular Phonebook Option *
first or last name. u Touch the List icon to list all entries.
4. Select the person’s name you want to call
and then press the
button.
When you select a person from the list in the cellular phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name.
List Icon
■ Store a number in HFL Numbers in the Cellular Phonebook can be stored in the HFL phonebook with a voice tag. 1. Select Store in HandsFreeLink. 2. Select a number you want to store in the
HFL phonebook.
3. Follow the prompts.
Preference
Home
Mobile
Work
Pager
Fax
Car
Voice
Other
If a name has four or more numbers, ... appears instead of category icons.
■ Delete imported phonebook 1. Select Delete Imported Phonebook, and a list of imported phonebooks
On some phones, it may not be possible to import the category icons to HFL.
appears.
2. Select a phonebook you want to delete.
u If the phonebook is PIN-protected, enter the PIN.
2 PIN P. 187
3. After making a selection, the confirmation screen appears. Select Yes, then OK
to complete the deletion.
186
* Not available on all models
12 CR-Z-31SZT610.book 187 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ PIN Each Cellular Phonebook can be PIN-protected. Select PIN Number to set, change, or delete a PIN.
To set a PIN: 1. Select a phonebook that is not PIN
protected. The Enter your new PIN screen appears.
2. Enter a four-digit PIN. You will have to re-
enter it for confirmation.
To change the PIN to a new PIN: 1. Select a phonebook you want to change
the PIN for.
2. Enter the current PIN. 3. Enter the new PIN. You will have to re-enter
it for confirmation.
To remove the PIN: 1. Select a phonebook you want to remove
the PIN for.
2. Enter the current PIN. 3. Select DO NOT USE PIN.
Continued
187
12 CR-Z-31SZT610.book 188 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ System Setup This command group allows you to change or customize HFL basic settings.
1System Setup
Press the
button before a command.
Once a passcode is set, you are required to enter the passcode with every new key cycle to use HFL. If you forget the code, go to your dealer to have the passcode reset. You can also cancel the passcode by clearing all the data stored in the HFL system.
2 To clear the system P. 189
The default setting of the incoming notification is a prompt.
■ To set a four-digit passcode to lock the HFL system for security 1. Say “System Setup.” 2. Say “Security.” 3. Follow the HFL prompts and say the four-digit number of your choice. 4. Follow the HFL prompts and confirm the number.
■ To change the security passcode 1. Say “System Setup.” 2. Say “Change Passcode” after the prompts. 3. Say the new four-digit passcode after the HFL prompts. 4. Follow the HFL prompts.
■ To select a ring tone or a prompt as the incoming call notification 1. Say “System Setup.” 2. Say “Call Notification” after the prompts. 3. Say “Ring Tone” or “Prompt” after the prompts. For no audible notification, say
“Off.”
188
12 CR-Z-31SZT610.book 189 ページ ２０１１年８月２９日 月曜日 午後８時８分
uu Bluetooth® HandsFreeLink®
*uHFL Menus
■ To activate or deactivate the auto transfer function The call on your cell phone can be automatically transferred to HFL when you get into the vehicle and turn on the ignition.
1System Setup
Press the
button before a command.
You can clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say “System Clear.”
1Change Language*
Press the
button before a command.
Quick Language Selection If you want to change the language, to French for example, say "Français," and follow the prompt.
1. Say “System Setup.” 2. Say “Auto Transfer” after the prompts. HFL lets you know the current status. 3. Follow the HFL prompts to change the setting.
■ To clear the system Paired phones, all stored or imported phonebook data, and any passcodes are erased.
1. Say “System Setup.” 2. Say “Clear” after the prompts.
