Before driving
Introduction
Instrumentation
Controls and features
Seating and safety restraints
Starting and driving
Starting
Driving
Roadside emergencies
Servicing
Maintenance and care
Capacities and specifications
Customer assistance
Reporting safety defects
Index
Contents
14
61
83
89
105
123
174
181
193
194
All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company.
Copyright r 1998 Ford Motor Company
Introduction
ICONS Indicates a safety alert. Read the following section on Warnings.
Indicates vehicle information related to recycling and other environmental concerns will follow. Correct vehicle usage and the authorized disposal of waste cleaning and lubrication materials are significant steps towards protecting the environment. Indicates a message regarding child safety restraints. Refer to Seating and safety restraints for more information.
Indicates that this Owner Guide contains information on this subject. Please refer to the Index to locate the appropriate section which will provide you more information.
WARNINGS Warnings provide information which may reduce the risk of personal injury and prevent possible damage to others, your vehicle and its equipment.
BREAKING-IN YOUR VEHICLE There are no particular breaking-in rules for your vehicle. During the first 1 600 km (1 000 miles) of driving, vary speeds frequently. This is necessary to give the moving parts a chance to break in.
INFORMATION ABOUT THIS GUIDE The information found in this guide was in effect at the time of printing. Ford may change the contents without notice and without incurring obligation.
Instrumentation
Instrumentation
Foglamp control *
(pg. 44)
Instrument cluster
(pg. 6)
Headlamp
control (pg. 42)
MIRROR
50
80
40
60
70
100
120
80
90
140
30
60
0 0 0 1 1 3
160
100
4 5
RPMx1000
THEFT
1 2/
FUEL FILL
LOW FUEL
Power side view mirrors*
(pg. 14)
Speed control*
(pg. 44)
Instrument panel dimmer switch
(pg. 14)
*if equipped
Driver side air bag
(pg. 71)
Instrumentation
Passenger side air bag
(pg. 71)
TAPE CD
Windshield wiper/
washer control
(pg. 49)
I N
M I S T O F F
SEEK TRACK
TUNE DISCS
AM FM
SCAN
VOL PUSH ON
EJ
PREMIUM SOUND
REW
FF
DOLBY B NR
SIDE 1-2
LO
HI
COMP
SHUF
OFF
A/C
MAX A/C
BASS
TREB
BAL
FADE
R.DEF
Climate control system
(pg. 37)
Electronic sound system
(pg. 15)
Instrumentation
WARNING LIGHTS AND CHIMES
Base instrument cluster
1 2/
FUEL FILL
SERVICE ENGINE SOON
LOW FUEL
ABS
BRAKE
50 60 70
80
100
120
0 0 0 0 0
40
30
60
40
20
10 20
0 0 0
MPH km/h
80
140
90
100
160
110
180
120
200
–
THEFT
Sport instrument cluster
1 2/
FUEL FILL
SERVICE ENGINE SOON
LOW FUEL
ABS
BRAKE
50 60 70
80
100
120
0 0 0 0 0
40
30
60
40
20
10 20
0 0 0
MPH km/h
80
140
90
100
160
110
180
120
200
4 5
RPMx1000
–
THEFT
ZX2 coupe instrument cluster
1 2/
FUEL FILL
50
80
40
60
70
100
120
80
140
90
30
60
0 0 0 0 0
160
100
20
40
10 20
MPH
0 0 0
km/h
180
110
120
4 5
RPMx1000
THEFT
LOW FUEL
SERVICE ENGINE SOON
BRAKE
–
ABS
Instrumentation
SERVICE ENGINE SOON
LOW FUEL
Low fuel Illuminates as an early reminder of a low fuel condition indicated on the fuel gauge. The light comes on when there is approximately 1/16th of a tank indicated on the fuel gauge (refer to Fuel gauge in this chapter for more information). The ignition must be in the ON position for this lamp to illuminate. The lamp will also illuminate for several seconds after the ignition is turned to the ON position regardless of the fuel level. Service engine soon Your vehicle is equipped with a computer that monitors the engine’s emission control system. This system is commonly known as the On Board Diagnostics System (OBD II). The OBD II system protects the environment by ensuring that your vehicle continues to meet government emission standards. The OBD II system also assists the service technician in properly servicing your vehicle. The Service Engine Soon indicator light illuminates when the ignition is first turned to the ON position to check the bulb. If it comes on after the engine is started, one of the engine’s emission control systems may be malfunctioning. The light may illuminate without a driveability concern being noted. The vehicle will usually be drivable and will not require towing. WhatyoushoulddoiftheServiceEngineSoonlightilluminates Light turns on solid: This means that the OBD II system has detected a malfunction. Temporary malfunctions may cause your Service Engine Soon light to illuminate. Examples are: 1. The vehicle has run out of fuel. (The engine may misfire or run poorly.) 2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with good quality fuel and/or properly installing and securely tightening the gas cap. After three driving cycles without these or any other
Instrumentation
temporary malfunctions present, the Service Engine Soon light should turn off. (A driving cycle consists of a cold engine startup followed by mixed city/highway driving.) No additional vehicle service is required. If the Service Engine Soon light remains on, have your vehicle serviced at the first available opportunity. Light is blinking: Engine misfire is occurring which could damage your catalytic converter. You should drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced at the first available opportunity.
Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire.
Air bag readiness Momentarily illuminates when the ignition is turned ON. If the light fails to illuminate, continues to flash or remains on, have the system serviced immediately.
Safety belt Momentarily illuminates when the ignition is turned to the ON position to remind you to fasten your safety belts. For more information, refer to the Seating and safety restraints chapter.
Brake system warning Momentarily illuminates when the ignition is turned to the ON position, the engine is off and the parking brake is engaged. If the brake warning lamp does not illuminate at this time, seek service immediately. Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately.
BRAKE
Instrumentation
Shift indicator light (if equipped) To maximize fuel economy, the shift indicator light illuminates when the manual transmission should be shifted to the next highest gear.
Anti-lock brake system (ABS) (If equipped) Momentarily illuminates when the ignition is turned on and the engine is off. If the light does not illuminate momentarily at start up, remains on or continues to flash, the ABS needs to be serviced. With the ABS light on, the anti-lock brake system is disabled and normal braking is still effective unless the brake warning light also remains illuminated with parking brake released.
ABS
Turn signal Illuminates when the left or right turn signal or the hazard lights are turned on. If one or both of the indicators stay on continuously or flash faster, check for a burned-out turn signal bulb. Refer to Exterior bulbs in the Maintenance and care chapter.
High beams Illuminates when the high beam headlamps are turned on.
Anti-theft system (if equipped) Refer to SecuriLocky passive anti-theft system in the Controls and features chapter.
THEFT
Instrumentation
Charging system Illuminates when the ignition is turned to the ON position and the engine is off. The light also illuminates when the battery is not charging properly, requiring electrical system service.
Engine oil pressure Momentarily illuminates when the ignition is turned to the ON position and the engine is off. Illuminates when the oil pressure falls below the normal range. Stop the vehicle as soon as safely possible and switch off the engine immediately. Check the oil level and add oil if needed. Refer to Engine oil in the Maintenance and Care chapter.
Liftgate ajar (if equipped) Illuminates when the ignition is in the ON position and the liftgate is open.
Safety belt warning chime Chimes to remind you to fasten your safety belts. For information on the safety belt warning chime, refer to the Seating and safety restraints chapter.
Supplemental restraint system (SRS) warning chime For information on the SRS warning chime, refer to the Seating and safety restraints chapter.
Key-in-ignition warning chime Sounds when the key is left in the ignition in the OFF/LOCK or ACC position and the driver’s door is opened.
Headlamps on warning chime Sounds when the headlamps or parking lamps are on, the ignition is off (and the key is not in the ignition) and the driver’s door is opened.
10
Instrumentation
GAUGES
Base instrument cluster gauges
1 2/
FUEL FILL
SERVICE ENGINE SOON
LOW FUEL
ABS
BRAKE
50 60 70
80
100
120
0 0 0 0 0
40
30
60
40
20
10 20
0 0 0
MPH km/h
80
140
90
100
160
110
180
120
200
–
THEFT
Sport instrument cluster gauges
1 2/
FUEL FILL
SERVICE ENGINE SOON
LOW FUEL
ABS
BRAKE
50 60 70
80
100
120
0 0 0 0 0
40
30
60
40
20
10 20
0 0 0
MPH km/h
80
140
90
100
160
110
180
120
200
4 5
RPMx1000
–
THEFT
ZX2 coupe instrument cluster gauges
50
80
40
60
70
100
120
80
140
90
30
60
0 0 0 0 0
160
100
20
40
10 20
MPH
0 0 0
km/h
180
110
120
1 2/
FUEL FILL
LOW FUEL
SERVICE ENGINE SOON
BRAKE
–
ABS
4 5
RPMx1000
THEFT
11
Instrumentation
FUEL FILL
1 2/
Fuel gauge Displays approximately how much fuel is in the fuel tank (when the key is in the ON position). The fuel gauge may vary slightly when the vehicle is in motion. The ignition should be in the OFF position while the vehicle is being refueled. When the gauge first indicates empty, there is a small amount of reserve fuel in the tank. When refueling the vehicle from empty indication, the amount of fuel that can be added will be less than the advertised capacity due to the reserve fuel. Engine coolant temperature gauge Indicates the temperature of the engine coolant. At normal operating temperature, the needle remains within the normal area (the area between the “H” and “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine immediately and let the engine cool. Refer to Engine coolant in the Maintenance and care chapter.
Never remove the coolant reservoir cap while the engine is running or hot.
This gauge indicates the temperature of the engine coolant, not the coolant level. If the coolant is not at its proper level the gauge indication will not be accurate.
12
Speedometer Indicates the current vehicle speed.
Odometer Registers the total kilometers (miles) of the vehicle.
Trip odometer Registers the kilometers (miles) of individual journeys. To reset, depress the control.
Tachometer (if equipped) Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer in the red zone may damage the engine.
Instrumentation
50
80
40
60
70
100
120
80
140
90
30
60
0 0 0 0 0
160
100
20
40
10 20
MPH
0 0 0
km/h
180
110
120
50
80
40
60
70
100
120
80
140
90
30
60
0 0 0 0 0 0
160
100
20
40
10 20
MPH
0 0 0
km/h
180
110
120
50
80
40
60
70
100
120
80
140
90
30
60
0 0 0 0 0 0
160
100
20
40
10 20
MPH
0 0 0 0
km/h
180
110
120
4 5
RPMx1000
THEFT
13
Controls and features
PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel during headlamp and parklamp operation. Coupe † Rotate up to brighten. † Rotate down to dim.
Sedan/Wagon † Rotate left to brighten. † Rotate right to dim.
POWER SIDE VIEW MIRRORS (IF EQUIPPED) The ignition must be in ACC or ON position to adjust the power side view mirrors. To adjust your mirrors: 1. Select L to adjust the left mirror or R to adjust the right mirror.
MIRRORS L R
14
Controls and features
2. Move the control in the direction you wish to tilt the mirror.
MIRRORS L R
3. Return to the center position to lock mirrors in place.
TRUNK REMOTE CONTROL Press the remote trunk release control on the instrument panel to open the trunk.
USING YOUR AUDIO SYSTEM AM/FM stereo
SEEK
TUNE
AM
SCAN
VOL PUSH ON
LO
N K R ELEA
NK
RELEA
FM
BASS
TREB
BAL
FADE
HI
OFF
R.DEF
A/C
MAX A/C
15
Controls and features
Volume/powercontrol Press the control to turn the audio system on or off.
VOL PUSH ON
Turn control to raise or lower volume.
VOL PUSH ON
If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. If you wish to maintain your preset volume level, turn the audio system off with the power control before switching off the ignition. AM/FMselect The AM/FM select control works in radio mode.
AM
FM
AM/FMselectinradiomode
This control allows you to select AM
or FM frequency bands. Press the
control to switch between AM, FM1
or FM2 memory preset stations.
AM
FM
16
Controls and features
Tuneadjust The tune control works in radio mode.
Tuneadjustinradiomode † Press the
to move to the next
frequency down the band (whether or not a listenable station is located there). Hold the
to move through the
frequencies quickly.
† Press the
to move to the next frequency up the band (whether or not a listenable station is located there). Hold the
for quick movement.
Seekfunction The seek function control works in radio mode.
Scanfunction The scan function works in radio mode.
SEEK
TUNE
SEEK
TUNE
SEEK
TUNE
SEEK
TUNE
SCAN
17
Controls and features
Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control.
AM
FM
2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected. Bass/trebleadjust † The bass adjust control allows you to increase or decrease the audio system’s bass output. † The treble adjust control allows you to increase or decrease the audio system’s treble output.
BASS
–
TREB
BAL
FADE
18
Speakerbalance/fadeadjust † Speaker sound distribution can be
adjusted between the right and left speakers. † Press the BAL control. Toggle
between the + and — control to adjust the speaker sound. † Speaker sound can be adjusted
between the front and rear speakers.
Controls and features
BASS
TREB
–
BAL
FADE
† Press the FADE control. Toggle between the + and — control to
adjust the speaker sound.
Settingtheclock To set the hour, press the hour (h) control and press: † (+) to increase hour and † (−) to decrease hour
To set the minute, press the minute (m) control and press: † (+) to increase minutes and † (−) to decrease minutes
12:
:01
19
Controls and features
AM/FM Stereo/Cassette
SEEK
TUNE
AM FM
SCAN
VOL PUSH ON
EJ
SIDE 1-2
LO
HI
TAPE
REW
FF
DOLBY B NR
BASS
TREB
BAL
FADE
OFF
R.DEF
A/C
MAX A/C
Volume/powercontrol Press the control to turn the audio system on or off.
VOL PUSH ON
Turn control to raise or lower volume.
VOL PUSH ON
If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. If you wish to maintain your preset
20
Controls and features
volume level, turn the audio system off with the power control before switching off the ignition. AM/FMselect The AM/FM select control works in radio modes.
AM
FM
AM/FMselectinradiomode
This control allows you to select AM
or FM frequency bands. Press the
control to switch between AM, FM1
or FM2 memory preset stations.
AM
FM
AM/FMselectintapemode Press this control to stop tape play and begin radio play. Tuneadjust The tune control works in radio mode.
SEEK
Tuneadjustinradiomode † Press the
to move to the next
frequency down the band (whether or not a listenable station is located there). Hold the
to move through the
frequencies quickly.
† Press the
to move to the next frequency up the band (whether or not a listenable station is located there). Hold
for quick movement.
TUNE
SEEK
TUNE
21
Controls and features
Seekfunction The seek function control works in radio or tape mode.
SEEK
TUNE
to find the next listenable station down the frequency band. to find the next listenable station up the frequency band.
to listen to the previous selection on the tape. to listen to the next selection on the tape.
Seekfunctioninradiomode † Press † Press Seekfunctionintapemode † Press † Press Scanfunction The scan function works in radio or tape mode.
SEEK
TUNE
SCAN
Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2).
22
Controls and features
Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control.
AM FM
SIDE 1-2
2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected. Bass/trebleadjust † The bass adjust control allows you to increase or decrease the audio system’s bass output. † The treble adjust control allows you to increase or decrease the audio system’s treble output.
BASS
–
TREB
Speakerbalance/fadeadjust † Speaker sound distribution can be
adjusted between the right and left speakers. † Press the BAL control. Toggle
between the + and — control to adjust the speaker sound. † Speaker sound can be adjusted
between the front and rear speakers.
† Press the FADE control. Toggle between the + and — control to
adjust the speaker sound.
BAL
FADE
BASS
TREB
–
BAL
FADE
23
Controls and features
DOLBY B NR
FF
EJ
REW
Insertingatape Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. You can switch from radio to tape play by inserting a tape into the cassette deck. Tapeplayselect Insert a tape to begin tape play. Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. Rewind The rewind control works in tape mode. † In tape mode, radio play will
REW
FF
continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached.
Fastforward The fast forward control works in tape mode. † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.
Tapesideselect Press this control to play the alternate side of a tape.
REW
FF
SIDE 1-2
24
Controls and features
Ejectfunction Press the control to stop and eject a tape.
EJ
REW
FF
DOLBY B NR
DolbyT noisereduction Dolbyt noise reduction manufactured under license from Dolby Laboratories Licensing Corporation operates only in tape mode. Dolbyt reduces the amount of hiss and static during tape playback. Press the button to activate (and deactivate) Dolbyt noise reduction.
Settingtheclock To set the hour, press the hour (h) control and press: † (+) to increase hour and † (−) to decrease hour
To set the minute, press the minute (m) control and press: † (+) to increase minutes and † (−) to decrease minutes
12:
:01
25
Controls and features
Premium AM/FM Stereo/Cassette/ Premium Sound (Radio Controlled CD Changer Compatible)
SEEK TRACK
TUNE DISCS
AM FM
SCAN
VOL PUSH ON
TAPE CD
BASS
TREB
BAL
FADE
R.DEF
EJ
PREMIUM SOUND
REW
FF
DOLBY B NR
SIDE 1-2
LO
HI
COMP
SHUF
OFF
A/C
MAX A/C
Volume/powercontrol Press the control to turn the audio system on or off.
VOL PUSH ON
Turn control to raise or lower volume.
VOL PUSH ON
If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the
26
Controls and features
ignition switch is turned back on. If you wish to maintain your preset volume level, turn the audio system off with the power control before switching off the ignition. AM/FMselect The AM/FM select control works in radio, tape and CD modes (if equipped).
AM FM
AM/FMselectinradiomode
This control allows you to select AM
or FM frequency bands. Press the
control to switch between AM, FM1
or FM2 memory preset stations.
AM FM
AM/FMselectintapemode Press this control to stop tape play and begin radio play. AM/FMselectinCDmode Press this control to stop CD play and begin radio play. You can switch from CD play to tape play by simply inserting a tape into the cassette deck. Tuneadjust The tune control works in radio or CD mode (if equipped).
SEEK TRACK
TUNE DISCS
27
SEEK TRACK
TUNE DISCS
SEEK TRACK
TUNE DISCS
Controls and features
Tuneadjustinradiomode † Press the
to move to the next
frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.
† Press the right side of the control to move to the next frequency up the band (whether or not a listenable station is located there). Hold for quick movement.
TuneadjustforCDmode(ifequipped) † Press the
to select the
previous disc in the CD changer. (Play will begin on the first track of the disc unless the CD changer is in shuffle mode. Refer to Shuffle feature for more information. Hold the control to continue reversing through the disc. † Press
to select the next disc in the CD changer. Hold the control
to fast-forward through the remaining discs.
Seekfunction The seek function control works in radio, tape or CD mode (if equipped).
SEEK TRACK
TUNE DISCS
Seekfunctioninradiomode † Press band. † Press
to find the next listenable station down the frequency
to find the next listenable station up the frequency band.
28
Controls and features
Seekfunctionintapemode † Press † Press SeekfunctioninCDmode(ifequipped) † Press
to listen to the previous selection on the tape. to listen to the next selection on the tape.
to seek to the previous track of the current disc. If a
selection has been playing for three seconds or more and you press , the CD changer will replay that selection from the beginning.
† Press
to seek forward to the next track of the current disc. After
the last track has been completed, the first track of the current disc will automatically replay.
Scanfunction The scan function works in radio, tape or CD mode (if equipped).
SEEK TRACK
TUNE DISCS
SCAN
Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. ScanfunctioninCDmode(ifequipped) Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2).
29
Controls and features
Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control.
AM FM
2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.
COMP
SIDE 1-2
SHUF
Bass/trebleadjust † The bass adjust control allows you to increase or decrease the audio system’s bass output. † The treble adjust control allows you to increase or decrease the audio system’s treble output.
Speakerbalance/fadeadjust † Speaker sound distribution can be
adjusted between the right and left speakers. † Speaker sound can be adjusted
between the front and rear speakers.
30
BASS
TREB
–
BAL
FADE
BASS
TREB
–
BAL
FADE
Controls and features
DOLBY B NR
FF
EJ
REW
Insertingatape Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. You can switch from CD (if equipped) to tape play by inserting a tape into the cassette deck. Tapeplayselect Insert a tape to begin tape play. Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. Rewind The rewind control works in tape and CD modes (if equipped). † In tape mode, radio play will
REW
FF
continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached.
† In CD mode, pressing the REW control for less than three seconds
results in slow rewind. Pressing the control for more than three seconds results in fast rewind.
Fastforward The fast forward control works in tape and CD modes (if equipped). † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.
REW
FF
† In CD mode, pressing the control for less than three seconds results in slow forward action. Pressing the control for more than three seconds results in fast forward action.
31
Controls and features
Tapesideselect Press this control to play the alternate side of a tape.
SIDE 1-2
Ejectfunction Press the control to stop and eject a tape.
EJ
REW
FF
DOLBY B NR
DolbyT noisereduction Dolbyt noise reduction manufactured under license from Dolby Laboratories Licensing Corporation operates only in tape mode. Dolbyt reduces the amount of hiss and static during tape playback. Press the button to activate (and deactivate) Dolbyt noise reduction.
Compressionadjust Compression adjust works in CD mode (if equipped), and brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust.
32
COMP
Shufflefeature The shuffle feature operates in CD mode (if equipped) and plays all tracks on the current disc in random order. If equipped with the CD changer, the shuffle feature continues to the next disc after all tracks are played. Press the SHUFFLE control to start this feature. Random order play will continue until the SHUFFLE control is pressed again. Settingtheclock To set the hour, press the hour (h) control and press: † (+) to increase the hour and † (−) to decrease the hour
To set the minute, press the minute (m) control and press: † (+) to increase the minute and † (−) to decrease the minute
Controls and features
SHUF