Download PDF Manual

Traction control - TC Transmission, automatic Tread wear indicator Trip computer Trip odometer Trunk, loading Trunk divider Trunk lighting, replacing


37
37
110
21
167
47
138
32
113
35
113, 114
86
105
180
46
104
151
37
37
79
126


32
168
195
32
75
138
194
37
130
137
138
126
126
113
108
127
41
32
82
71
169


Trunk, limiting access to Trunk, opening from the inside Trunk, opening mechanically Turn signal bulb, replacing Uniform Tire Quality Grading Unlock (personal settings) Unlocking the fuel filler door Unlocking the fuel filler door manually Valet locking Vanity mirror lighting, replacing Vehicle Event Data Vehicle Identification Number Vehicle loading Volvo and the environment Volvo Customer Care Center, contacting Volvo maintenance Volvo On Call Roadside Assistance W Winter/Wet driving mode Warning flashers Warning symbol Warranties Washer fluid Washing the car Waxing Weight distribution Weights Wheel nuts Wheels, changing Wheels, storing Whiplash Protection System (WHIPS) Wind blocker Windshield washer fluid Windshield wiper blades Windshield wipers Winter/Wet driving mode Wiper blades


89
91
90
167


134
51
38
39


89
169
154
188
133
1, 16, 19
154
195


109
46
32, 33
154
159
148
149
98
189
136
138
126
23
76
159
161
44
109
161


Contents| Top of Page


2 0 0 6 VOLVO


C70


VOLVO OWNER'S MANUAL C70


Introduction


Welcome to the worldwide family of Volvo owners. We hope that you will enjoy many years of safe driving in your Volvo, an automobile designed with your safety and comfort in mind. To help ensure your satisfaction with this vehicle, we encourage you to familiarize yourself with the equipment descriptions, operating instructions and maintenance requirements/recommendations in this manual. We also urge you and your passengers to wear seat belts at all times in this (or any other) automobile. And, of course, please do not operate a vehicle if you may be affected by alcohol, medication or any impairment that could hinder your ability to drive.


Your Volvo is designed to meet all applicable safety and emission standards, as indicated by the certification labels attached to the driver's door opening, and on the underside of the hood.


For further information please contact your retailer, or:


In the USA: Volvo Cars of North America Customer Care Center P.O. Box 914 Rockleigh, New Jersey 07647-0914 1-800-458-1552 http://www.volvocars.us


In Canada: Volvo Cars of Canada Ltd. National Customer Service 175 Gordon Baker Road North York, Ontario M2H 2N7 1-800-663-8255
http://www.volvocanada.com


2005 ©Volvo Cars of North America, LLC


General Information


pg. 2 Introduction


Shiftlock


When your car is parked, the gear selector is locked in the (P)ark position. To release the selector from this position, turn the ignition key to position II (or start the engine), depress the brake pedal, press the button on the front side of the gear selector and move the selector from (P)ark.


Keylock When the ignition is switched off, the gear selector must be in the (P)ark position before the key can be removed from the ignition switch.


Anti-lock Brake System (ABS) The ABS system in your car performs a self-diagnostic test when the vehicle first reaches the speed of approximately 12 mph (20 km/h). The brake pedal will pulsate several times and a sound may be audible from the ABS control module. This is normal.


Fuel filler door Press the button on the light switch panel when the car is at a standstill to open the fuel filler door.


Fuel filler cap After refueling, close the fuel filler cap by turning it clockwise until it clicks into place. If this cap is not closed tightly or if the engine is running when the car is refueled, the Malfunction Indicator Lamp ("Check Engine" light) may indicate a fault.


Points to keep in mind


Before you operate your vehicle for the first time, please familiarize yourself with the new-engine oil consumption


information on page 191. You should also be familiar with the information found in the chapters "Instruments and controls," and "Starting and driving."


Information contained in the balance of the manual is extremely useful and should be read after operating the vehicle


for the first time.


ready access.


The manual is structured so that it can be used for reference. For this reason, it should be kept in the vehicle for


Do not export your Volvo to another country before investigating that country's applicable safety and emission


control requirements. In some cases it may be difficult or impossible to comply with these requirements. Modifications to the emission control system(s) may render your Volvo not certifiable for legal operation in the U.S., Canada and other countries.


All information, illustrations and specifications contained in this manual are based on the latest product information


available at the time of publication. Please note that some vehicles may be equipped differently, depending on special legal requirements. Optional equipment described in this manual may not be available in all markets.


Volvo reserves the right to make model changes at any time, or to change specifications or design without notice and


without incurring obligation.


WARNING!


If your vehicle is involved in an accident, unseen damage may affect its driveability and safety.


Volvo and the environment


Volvo is committed to the well being of its customers. As a natural part of this commitment, we care about the environment in which we all live. Caring for the environment means an everyday involvement in reducing our environmental impact. Volvo's environmental activities are based on a holistic view, which means we consider the overall environmental impact of a product


pg. 3 Introduction


throughout its complete life cycle. In this context, design, production, product use, and recycling are all important considerations. In production, Volvo has partly or completely phased out several chemicals including freons, lead chromates, naphtanates, asbestos, mercury and cadmium; and reduced the amount of chemicals used in our plants 50% since 1991.


Volvo was the first in the world to introduce into production a three-way catalytic converter with a Lambda sond, now called the heated oxygen sensor, in 1976. The current version of this highly efficient system reduces emissions of harmful substances (CO, HC, NOx) from the exhaust pipe by approximately 95% and the search to eliminate the remaining emissions continues. Volvo is the only automobile manufacturer to offer CFC-free retrofit kits for the air conditioning system of all models as far back as the 1975 model 240. Advanced electronic engine controls, refined purification systems and cleaner fuels are bringing us closer to our goal. After Volvo cars and parts have fulfilled their use, recycling is the next critical step in completing the life cycle. The metal content is about 75% of the total weight of a car, which makes the car among the most recycled industrial products. In order to have efficient and well controlled recycling, many Volvo variants have printed dismantling manuals, indicating the weight and material of individual components. For Volvo, all homogeneous plastic parts weighing more than 1.7 oz. (50 grams) are marked with international symbols that indicate how the component is to be sorted for recycling. In addition to continuous environmental refinement of conventional gasoline-powered internal combustion engines, Volvo is actively looking at advanced technology alternative-fuel vehicles.


When you drive a Volvo, you become our partner in the work to lessen the car's impact on the environment. To reduce your vehicle's environmental impact, you can:


Maintain proper air pressure in your tires. Tests have shown decreased fuel economy with improperly inflated tires. Follow the recommended maintenance schedule in your Warranty and Service Records Information booklet. Drive at a constant speed whenever possible. See a trained and qualified Volvo service technician as soon as possible for inspection if the check engine


(malfunction indicator) lamp illuminates, or stays on after the vehicle has started.


Properly dispose of any vehicle-related waste such as used motor oil, used batteries, brake pads, etc. When cleaning your car, use Volvo's own car care products, all of which have systematically been adapted to the


environment.


WARNING!


CALIFORNIA proposition 65
Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the state of California to cause cancer, and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.


pg. 4 Introduction


Important warnings


Accessory installation


We strongly recommend that Volvo owners install only genuine, Volvo-approved accessories, and that accessory


installations be performed only by the factory-trained technicians at your authorized Volvo retailer.


Genuine Volvo accessories are tested to ensure compatibility with the performance, safety, and emission systems in your car. Additionally, your authorized Volvo retailer knows where accessories may and may not be safely installed in your Volvo. In all cases, please consult your authorized Volvo retailer before installing any accessory in or on your car.


Accessories that have not been approved by Volvo may or may not be specifically tested for compatibility with your


car. Additionally, an inexperienced installer may not be familiar with some of your car's systems.


Any of your car's performance and safety systems could be adversely affected if you install accessories that Volvo


has not tested, or if you allow accessories to be installed by someone unfamiliar with your car.


Damage caused by unapproved or improperly installed accessories may not be covered by your new car warranty.


See your Warranty and Service Records Information booklet for more warranty information. Volvo assumes no responsibility for death, injury, or expenses that may result from the installation of non-genuine accessories.


Driver distraction


Driver distraction results from driver activities that are not directly related to controlling the car in the driving environment. Your new Volvo is, or can be, equipped with many feature-rich entertainment and communication systems. These include hands-free cellular telephones, navigation systems, and multipurpose audio systems. You may also own other portable electronic devices for your own convenience. When used properly and safely, they enrich the driving experience. Improperly used, any of these could cause a distraction.


For all of these systems, we want to provide the following warning that reflects the strong Volvo concern for your


Never use these devices or any feature of your vehicle in a way that distracts you from the task of driving safely.


Distraction can lead to a serious accident. In addition to this general warning, we offer the following guidance regarding specific newer features that may be found in your vehicle:


Never use a hand-held cellular telephone while driving. Some jurisdictions prohibit cellular telephone use by a


driver while the vehicle is moving.


If your car is equipped with a navigation system, set and make changes to your travel itinerary only with the vehicle


safety:


parked.


Never program your audio system while the vehicle is moving. Program radio presets with the vehicle parked, and


use your programmed presets to make radio use quicker and simpler.


Never use portable computers or personal digital assistants while the vehicle is moving.


A driver has a responsibility to do everything possible to ensure his or her own safety and the safety of passengers in the vehicle and others sharing the roadway. Avoiding distractions is part of that responsibility.


Contents


pg. 5 Introduction


Contents Instrument overview Safety Instruments and controls Climate Interior Locks and alarm Starting and driving Wheels and tires Vehicle care Maintenance and servicing Audio Specifications Index


pg. 6 Introduction


This page left blank intentionally.


Chapter 1 - Instrument overview


pg. 7 Instrument overview


pg. 8 Instrument overview


Page 46
157


40
38
93
93
59


1. Steering wheel adjustment 2. Hood opener 3. Controls in driver's door (see inset illustration below) 4. Left steering wheel lever 5. Lighting panel, fuel filler door opener 6. Door open handle, and locking button 7. Lock indicator light 8. Climate system air vent 9. Side window air vent 10. Cruise control 11. Horn, airbag 12. Main instrument panel 13. Audio controls 14. Right steering wheel lever 15. Ignition switch 16. Rear-view mirror and optional compass 17. Seat belt reminder 18. Driver's side reading light 19. Movement detector (option), alarm sensor 20. Courtesy lighting switch 21. Position for accessory switch 22. Passenger's side reading light 77
23. Display for climate control, personal settings, and audio system 51


42
14
32
176
44
104
49
13
77
95
77


24. Controls for personal settings and audio system 25. Controls for climate system 26. Hazard warning flashers 27. Door open handle, and locking button 28. Glove compartment 29. Gear selector, manual/ 29. Gear selector, automatic 30. Parking brake 31. 12-volt socket 32. Switches for raising/lowering the power retractable hard top


51 / 176
60
46
93
90
107
108
47
47
72


Page 48
1. All windows up/down 48
2. Power windows 50
3. Door mirror button, driver's side 4. Door mirror adjustment control 50
5. Door mirror button, passenger's side 50


Contents | Top of Page


2 0 0 6
VOLVO


C70


Chapter 2 - Safety


pg. 9 Safety


10
Occupant safety 11
Seat belts 14
Supplemental Restraint System (SRS) Front airbags 15
Occupant Weight Sensor - disabling the passenger's side front airbag 18
21
Side impact protection (SIPS) airbags 22
Door Mounted Inflatable Curtain (DMIC) Whiplash Protection System (WHIPS) 23
25
Roll-over Protection system (ROPS) 26
Collision status Inspecting SRS system components 27
28
Child safety


pg. 10 Safety


Occupant safety


Volvo's concern for safety Safety is Volvo's cornerstone. Our concern dates back to 1927 when the first Volvo rolled off the production line. Three-point seat belts (a Volvo invention), safety cages, and energy-absorbing impact zones were designed into Volvo cars long before it was fashionable or required by government regulation. We will not compromise our commitment to safety. We continue to seek out new safety features and to refine those already in our cars. You can help. We would appreciate hearing your suggestions about improving automobile safety. We also want to know if you ever have a safety concern with your car. Call us in the U.S. at: 1-800-458-1552 or in Canada at: 1-800-663-8255.


Occupant safety reminders How safely you drive doesn't depend on how old you are but rather on:


How well you see. Your ability to concentrate. How quickly you make decisions under stress to avoid an accident.


The following suggestions are intended to help you cope with the ever changing traffic environment.


Never drink and drive. If you are taking any medication, consult your physician about its potential effects on your driving abilities.


Take a driver-retraining course. Have your eyes checked regularly. Keep your windshield and headlights clean. Replace wiper blades when they start to leave streaks. Take into account the traffic, road, and weather conditions, particularly with regard to stopping distance.


Reporting safety defects in the U.S. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Volvo Cars of North America. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your retailer, or Volvo Cars of North America. To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) or write to: NHTSA, U.S. Department of Transportation, Washington D.C. 20590. You can also obtain other information about motor vehicle safety from the Hotline. Volvo strongly recommends that if your vehicle is covered under a service campaign, safety or emission recall or similar action, it should be completed as soon as possible. Please check with your local retailer or Volvo Cars of North America, LLC if your vehicle is covered under these conditions.


NHTSA can be reached at: Internet: http://www.nhtsa.gov Telephone: 1-888-DASH-2-DOT (1-888-327-4236).


pg. 11 Safety


Seat belts


Using seat belts Volvo, the inventor of the three-point seat belt, urges you and all occupants of your vehicle to wear seat belts and ensure that children are properly restrained, using an infant, car, or booster seat determined by age, weight and height. Volvo also believes no child should sit in the front seat of a vehicle. Most states and provinces make it mandatory for occupants of a vehicle to use seat belts.


Seat belt tensioners The front and rear seat belts are equipped with tensioners that reduce slack in the belts. These tensioners are triggered in situations where the airbags deploy. The front seat belts also include a tension reducing device which, in the event of a collision, limits the peak forces exerted by the seat belt on the occupant.


Buckling a seat belt Pull the belt out far enough to insert the latch plate into the receptacle until a distinct click is heard. The seat belt retractor is normally "unlocked" and you can move freely, provided that the shoulder belt is not pulled out too far. The retractor will lock up as follows:


if the belt is pulled out rapidly during braking and acceleration if the vehicle is leaning excessively when driving in turns


When wearing the seat belt remember:


The belt should not be twisted or turned. The lap section of the belt must be positioned low on the hips (not pressing against the abdomen). Make sure that the shoulder belt is rolled up into its retractor and that the shoulder and lap belts are taut.


Unbuckling the seat belt


To remove the seat belt, press the red section on the seat belt receptacle. Before exiting the vehicle, check that the


seat belt retracts fully after being unbuckled. If necessary, guide the belt back into the retractor slot.


WARNING!


Never use a seat belt for more than one occupant. Never wear the shoulder portion of the belt under the arm, behind the back or otherwise out of position. Such use could cause injury in the event of an accident. As seat belts lose much of their strength when exposed to violent stretching, they should be replaced after any collision, even if they appear to be undamaged.


pg. 12 Safety


Seat belts


WARNING!


Never repair the belt yourself; have this work done by a trained and qualified Volvo service technician only. Any device used to induce slack into the shoulder belt portion of the three-point belt system will have a


detrimental effect on the amount of protection available to you in the event of a collision.


The seat back should not be tilted too far back. The shoulder belt must be taut in order to function properly. Do not use child safety seats or child booster cushions/backrests in the front passenger's seat. We also recommend


that children who have outgrown these devices sit in the rear seat with the seat belt properly fastened.


Seat belt use during pregnancy The seat belt should always be worn during pregnancy. But it is crucial that it be worn in the correct way. The diagonal section should wrap over the shoulder then be routed between the breasts and to the side of the belly. The lap section should lay flat over the thighs and as low as possible under the belly. It must never be allowed to ride upward. Remove all slack from the belt and insure that it fits close to the body without any twists. As a pregnancy progresses, pregnant drivers should adjust their seats and steering wheel such that they can easily maintain control of the vehicle as they drive (which means they must be able to easily operate the foot pedals and steering wheel). Within this context, they should strive to position the seat with as large a distance as possible between their belly and the steering wheel.


Child seats Please refer to page 30 for information on securing child seats with the seat belts.


pg. 13 Safety


Seat belts


Seat belt reminder The seat belt reminder consists of an audible signal, an indicator light above the rearview mirror, and a symbol in the instrument panel (see page 35 ) that alert the driver and front seat passenger if their seat belts are not fastened.


NOTE: The function is active for a total of 6 minutes from the time the ignition is switched on.


During the first minute: The seat belt reminder function only reacts if the driver has not fastened his/her seat belt.


The indicator light above the mirror and the symbol in the instrument panel will light up and stay lit until the seat


belt has been fastened.


A chime will sound for 6 seconds. The frequency of the chiming increases with the speed of the car.


After one minute has elapsed: The seat belt reminder reacts if the driver and/or the front seat passenger have not fastened their seat belts.


The indicator light above the mirror and the symbol in the instrument panel will light up and stay lit until the seat


belt(s) have been fastened, or until the remaining 5 minutes of the 6-minute cycle have elapsed.


The chime will sound for 6 seconds, at 30-second intervals. The frequency of the chiming increases with the speed


of the car. After 6 minutes, the chime will no longer sound and the indicator lights will go out.


Seat belt maintenance Check periodically that the seat belts are in good condition. Use water and a mild detergent for cleaning. Check seat belt mechanism function as follows: attach the seat belt and pull rapidly on the strap.


pg. 14 Safety


Supplemental Restraint System (SRS)


Supplemental Restraint System As an enhancement to the three-point seat belts, your Volvo is equipped with a Supplemental Restraint System (SRS). Volvo's SRS consists of seat belt tensioners, front airbags, side impact airbags, the occupant weight sensor, and inflatable curtains. All of these systems are monitored by the SRS control module. An SRS warning light in the instrument panel (see the illustration above) illuminates when the ignition key is turned to position I, II, or III, and will normally go out after approximately 7 seconds if no faults are detected in the system. Where applicable, a text message will also be displayed when the SRS warning light illuminates. If this warning symbol is not functioning properly, the general warning symbol


illuminates and a text message will be displayed.


WARNING!


If the SRS warning light stays on after the engine has started or if it illuminates while you are driving, have the


vehicle inspected by a trained and qualified Volvo service technician as soon as possible.


Never try to repair any component or part of the SRS yourself. Any interference in the system could cause


malfunction and serious injury. All work on these systems should be performed by a trained and qualified Volvo service technician.


WARNING!


If your vehicle has been subjected to flood conditions (e.g. soaked carpeting/ standing water on the floor of the vehicle) or if your vehicle has become flood-damaged in any way, do not attempt to start the vehicle or put the key in the ignition before disconnecting the battery (see below). This may cause airbag deployment which could result in personal injury. Have the vehicle towed to a trained and qualified Volvo service technician for repairs.


Automatic transmission: Before attempting to tow the vehicle, use the following procedure to override the shiftlock system to move the gear selector to the neutral position:


Switch off the ignition for at least 10 minutes and disconnect the battery Wait at least one minute. Insert the key in the ignition and turn it to position II. Press firmly on the brake pedal. Move the gear selector from (P)ark to the (N)eutral position. See page 110 for information on manually overriding


the shiftlock system.


pg. 15 Safety


Front airbags


The front airbag system The front airbags supplement the three-point seat belts. For these airbags to provide the protection intended, seat belts must be worn at all times. The front airbag system includes gas generators (1) surrounded by the airbags (2) and a deceleration sensor (3) that activates the gas generators, causing the airbags to be inflated with nitrogen gas.


As the movement of the seats' occupants compresses the airbags, some of the gas is expelled at a controlled rate to provide better cushioning. Both seat belt tensioners also deploy, minimizing seat belt slack. The entire process, including inflation and deflation of the airbags, takes approximately one fifth of a second. The location of the front airbags is indicated by "SRS AIRBAG" embossed on the steering wheel pad and above the glove compartment, and by decals on both sun visors and on the front and far right side of the dash.


The driver's side front airbag is folded and located in the steering wheel hub. The passenger's side front airbag is folded behind a panel located above the glove compartment.


WARNING!


housing.


The airbags in the vehicle are designed to be a SUPPLEMENT to-not a replacement for-the three-point seat belts.


For maximum protection, wear seat belts at all times. Be aware that no system can prevent all possible injuries that may occur in an accident.


Never drive a vehicle with a steering wheel-mounted airbag with your hands on the steering wheel pad/airbag


The front airbags are designed to help prevent serious injury. Deployment occurs very quickly and with


considerable force. During normal deployment and depending on variables such as seating position, one may experience abrasions, bruises, swellings, or other injuries as a result from deployment of one or both of the airbags. When installing any accessory equipment, make sure that the front airbag system is not damaged. Any interference


in the system could cause malfunction.


pg. 16 Safety


Front airbags


Front airbag deployment


The front airbags are designed to deploy during certain frontal or front-angular collisions, impacts, or decelerations, depending on the crash severity, angle, speed and object impacted. The airbags may also deploy in certain non-frontal collisions where rapid deceleration occurs.


The SRS sensors, which trigger the front airbags, are designed to react to both the impact of the collision and the


inertial forces generated by it, and to determine if the intensity of the collision is sufficient for the seat belt tensioners and/or airbags to be deployed.


However, not all frontal collisions activate the front airbags.


If the collision involves a nonrigid object (e.g., a snow drift or bush), or a rigid, fixed object at a low speed, the


front airbags will not necessarily deploy.


Front airbags do not normally deploy in a side impact collision, in a collision from the rear or in a rollover situation. The amount of damage to the bodywork does not reliably indicate if the airbags should have deployed or not.


NOTE:


Deployment of front airbags occurs only one time during an accident. In a collision where deployment occurs, the airbags and seat belt tensioners activate. Some noise occurs and a small amount of powder is released. The release of the powder may appear as smoke-like matter. This is a normal characteristic and does not indicate fire.


Volvo's dual-threshold, dual-stage front airbags use special sensors that are integrated with the front seat buckles.


The point at which the airbag deploys is determined by whether or not the seat belt is being used, as well as the severity of the collision.


Collisions can occur where only one of the airbags deploys. If the impact is less severe, but severe enough to present a clear injury risk, the dual-stage airbags are triggered at 70% of their total capacity. If the impact is more severe, the dual-stage airbags are triggered at full capacity.


Should you have questions about any component in the SRS system, please contact a trained and qualified Volvo service technician or Volvo Customer Support:


In the USA Volvo Cars of North America Customer Care Center P.O. Box 914 Rockleigh, New Jersey 07647-0914
1-800-458-1552
http://www.volvocars.us


In Canada Volvo Cars of Canada Ltd. National Customer Service 175 Gordon Baker Road North York, Ontario M2H 2N7
1-800-663-8255
http://www.volvocanada.com


WARNING!


Do not use child safety seats or child booster cushions/backrests in the front passenger's seat. We also recommend that occupants under 4 feet 7 inches (140 cm) in height who have outgrown these devices sit in the rear seat with the seat belt fastened(a).


Never drive with the airbags deployed. The fact that they hang out can impair the steering of your vehicle. Other


safety systems can also be damaged.


prolonged exposure.


The smoke and dust formed when the airbags are deployed can cause skin and eye irritation in the event of


a. See also the Occupant Weight Sensor information on page 18.


pg. 17 Safety


WARNING!


Children must never be allowed in the front passenger's seat. Volvo recommends that ALL occupants (adults and children) shorter than 4 feet 7 inches (140 cm) be seated in the back seat of any vehicle with a passenger-side front airbag. See page 30 for guidelines.


Occupants in the front passenger's seat must never sit on the edge of the seat, sit leaning toward the instrument


The occupant's back must be as upright as comfort allows and be against the seat back with the seat belt properly


panel or otherwise sit out of position.


fastened.


Feet must be on the floor, e.g., not on the dash, seat or out of the window.


WARNING!


No objects or accessory equipment, e.g. dashboard covers, may be placed on, attached to, or installed near the air bag hatch (the area above the glove compartment) or the area affected by airbag deployment (see the illustration on page 14).


There should be no loose articles, e.g. coffee cups, on the floor, seat, or dashboard area. Never try to open the airbag cover on the steering wheel or the passenger's side dashboard. This should only be


done by a trained and qualified Volvo service technician.


Failure to follow these instructions can result in injury to the vehicle occupants.


pg. 18 Safety


Occupant Weight Sensor - disabling the passenger's side front airbag


Disabling the passenger's side front airbag Volvo recommends that ALL occupants (adults and children) shorter than 4 feet 7 inches (140 cm) be seated in the back seat of any vehicle with a front passenger side airbag, and be properly restrained for their size and weight. See also the child safety recommendations on page 30.


The passenger's side front airbag is automatically enabled/disabled by the Occupant Weight Sensor (OWS), a system that monitors the weight of the person or object in the front passenger's seat. The system consists of a silicone-filled bag located under the padding in the front passenger's seat cushion, a control module located under this seat, and a seat belt tension sensor, located on the outboard side of the seat.


The OWS system continuously monitors the pressure on the front passenger's seat cushion and the tension applied to the seat belt. Based on this data, OWS assesses the weight of the occupant or object in the front passenger's seat. This information is transmitted to the SRS system control module, which enables or disables the passenger's side front airbag accordingly, as indicated in the table on the following page. If the system is functioning normally, the status of the front passenger's side airbag (enabled/disabled) will be shown by the OWS indicator light as explained in the table on the following page. The OWS indicator light is separate and in addition to the SRS warning light in the instrument panel.


NOTE: When the ignition is switched on, the OWS indicator light will go on for up to 10 seconds while the system performs a self-diagnostic test. The light will then go out unless the seat is occupied by a low weight occupant/object. However, if a fault is detected in the system:


The OWS indicator light will stay on


The SRS warning light (see page 14) will come on and stay on The message PASS. AIRBAG OFF SERVICE URGENT will be displayed in the information display.


WARNING!


If a fault in the system is detected and indicated as explained on the preceding page, be aware that the passenger's side front airbag will not deploy in the event of a collision. In this case, the SRS system and Occupant Weight Sensor should be inspected by a trained and qualified Volvo service technician as soon as possible.


WARNING!


Never try to open, remove, or repair any components in the OWS system. This could result in system malfunction.


Maintenance or repairs should only be carried out by an a trained and qualified Volvo service technician.


The front passenger's seat should not be modified in any way. This could reduce pressure on the seat cushion,


which might interfere with the OWS system's function.


pg. 19 Safety


Occupant Weight Sensor - disabling the passenger's side front airbag


a. Volvo recommends that children always be properly restrained in appropriate child restraints in the rear seats. In rare situations when the seat belt is not latched, some child restraint systems may not be detected by the OWS because there is very little weight on the vehicle seat cushion. In these cases the airbag may be turned off but the "passenger airbag off" indicator would not be lit. DO NOT assume the front passenger airbag is turned off unless the indicator is lit. Make sure the child restraint is properly belted and that the indicator is lit, or move the child restraint to the rear seat.


Modifications If you are considering modifying your vehicle in any way to accommodate a disability, for example by altering or adapting the driver's or front passenger's seat(s) and/or airbag systems, please contact Volvo at:


In the USA Volvo Cars of North America Customer Care Center P.O. Box 914 Rockleigh, New Jersey 07647-0914
1-800-458-1552


In Canada Volvo Cars of Canada Ltd. National Customer Service 175 Gordon Baker Road North York, Ontario M2H 2N7
1-800-663-8255


pg. 20 Safety


Occupant Weight Sensor - disabling the passenger's side front airbag


WARNING!


No objects that add to the total weight on the seat should be placed on the front passenger's seat. If a child is seated in the front passenger's seat with any additional weight, this extra weight could cause the OWS system to enable the airbag, which might cause it to deploy in the event of a collision, thereby injuring the child.


The seat belt should never be wrapped around an object on the front passenger's seat. This could interfere with the


OWS system's function.


The front passenger's seat belt should never be used in a way that exerts more pressure on the passenger than


normal. This could increase the pressure exerted on the weight sensor by a child, and could result in the airbag being enabled, which might cause it to deploy in the event of a collision, thereby injuring the child.


WARNING!


Keep the following points in mind with respect to the OWS system. Failure to follow these instructions could adversely affect the system's function and result in serious injury to the occupant of the front passenger's seat:


The full weight of the front seat passenger should always be on the seat cushion. The passenger should never lift him/herself off the seat cushion using the armrest in the door or the center console, by pressing the feet on the floor, by sitting on the edge of the seat cushion, or by pressing against the backrest in a way that reduces pressure on the seat cushion. This could cause OWS to disable the front, passenger's side airbag.


Do not place any type of object on the front passenger's seat in such a way that jamming, pressing, or squeezing


occurs between the object and the front seat, other than as a direct result of the correct use of the ALR/ELR seat belt (see page 30).


No objects should be placed under the front passenger's seat. This could interfere with the OWS system's function.


pg. 21 Safety


Side impact protection (SIPS) airbags


Side impact airbags - front seats only As an enhancement to the structural side impact protection built into your car, the car is also equipped with Side Impact Protection System (SIPS) airbags. The SIPS airbag system is designed to help increase occupant protection in the event of certain side impact collisions. The SIPS airbags are designed to deploy only during certain side-impact collisions, depending on the crash severity, angle, speed and point of impact.


NOTE: SIPS airbag deployment (one airbag) occurs only on the side of the vehicle affected by the impact. The airbags are not designed to deploy in all side impact situations.


Components in the SIPS airbag system This SIPS airbag system consists of a gas generator (1), the side airbag modules built into the outboard sides of both front seat backrests (2), and electronic sensors/wiring (3).


WARNING!


The SIPS airbag system is a supplement to the structural Side Impact Protection System and the three-point seat belt system. It is not designed to deploy during collisions from the front or rear of the car or in rollover situations.


The use of seat covers on the front seats may impede SIPS airbag deployment. No objects, accessory equipment or stickers may be placed on, attached to or installed near the SIPS airbag system


or in the area affected by SIPS airbag deployment.


Never try to open or repair any components of the SIPS airbag system. This should be done only by a trained and


qualified Volvo service technician.


position with the seat belt properly fastened.


In order for the SIPS airbag to provide its best protection, both front seat occupants should sit in an upright


Failure to follow these instructions can result in injury to the occupants of the vehicle in the event of an accident.


pg. 22 Safety


Door Mounted Inflatable Curtain (DMIC)


The Door Mounted Inflatable Curtain system The DMIC is a supplement to the structural side impact protection. These inflatable curtains are concealed in the upper section of the driver and passenger doors.


The Inflatable Curtain (DMIC) and the Side Impact Airbag System (SIPS-bag) will both deploy in certain side


impacts.


In certain situations in which there is a roll-over risk, only the inflatable curtain (DMIC) may deploy.


NOTE:


DMIC deployment can occur regardless of whether the power retractable hard top is up or down. If the inflatable curtain deploys, it remains inflated for approximately 5 seconds.


WARNING!


The DMIC system is a supplement to the Side Impact Protection System. It is not designed to deploy during


collisions from the front or rear of the car. It only provides protection for the occupants of the front seats.


Never install or mount any equipment on the insides of the doors, door pillars, or side panels. This could impede


the function of the DMIC system.


qualified Volvo service technician.


Never try to open or repair any components of the DMIC system. This should be done only by a trained and


WARNING!


In order for the DMIC to provide its best protection, both front seat occupants should sit in an upright position with the seat belt properly fastened; adults using the seat belt and children using the proper child restraint system. Only adults should sit in the front seats. Children must never be allowed in the front passenger seat. See page 30 for guidelines. Failure to follow these instructions can result in injury to the vehicle occupants in an accident.


pg. 23 Safety


Whiplash Protection System (WHIPS)


Whiplash Protection System (WHIPS) - front seats only The WHIPS system consists of specially designed hinges and brackets on the front seat backrests designed to help absorb some of the energy generated in a collision from the rear (when the vehicle is "rear-ended"). In the event of a collision of this type, the hinges and brackets of the front seat backrests are designed to change position slightly to allow the backrest/head restraint to help support the occupant's head before moving slightly rearward. This movement helps absorb some of the forces that could result in whiplash.


WARNING!


The WHIPS system is designed to supplement the other safety systems in your car. For this system to function


properly, the three-point seat belt must be worn. Please be aware that no system can prevent all possible injuries that may occur in an accident.


The WHIPS system is designed to function in certain collisions from the rear, depending on the crash severity,


angle and speed.


WARNING!


Occupants in the front seats must never sit out of position. The occupant's back must be as upright as comfort allows and be against the seat back with the seat belt properly fastened.


WARNING!


If your car has been involved in a rearend collision, the front seat backrests must be inspected by a trained and qualified Volvo service technician, even if the seats appear to be undamaged. Certain components in the WHIPS system may need to be replaced.


Do not attempt to service any component in the WHIPS system yourself.


pg. 24 Safety


Whiplash Protection System (WHIPS)


WARNING!


Boxes, suitcases, etc. wedged behind the front seats could impede the function of the WHIPS system.


pg. 25 Safety


Roll-over Protection system (ROPS)


Roll-over Protection system (ROPS) The ROPS system consists of two roll bars located behind the rear seat head restraints, and a sensor that monitors the roll or pitch angle of the car. If the car rolls or pitches beyond a preset angle, the roll bars are automatically deployed (raised).


NOTE:


The ROPS system is designed to function regardless of whether the power retractable hard top is up or down. By


design, the tops of the roll bars are equipped with a point in order to pierce the rear window if the top is up.


If ROPS has deployed, the system should be inspected and repaired if necessary by a trained and qualified Volvo


service technician.


WARNING!


The rear seat of the Volvo C70 is intended for two occupants, and only two rear seat belts are provided. The center


section of the seat should never be used to seat a passenger.


No objects should be placed over the roll bars or behind the rear seat head restraints. All repairs or maintenance to the ROPS system should only be performed by a trained Volvo service technician.


pg. 26 Safety


Collision status


Driving after a collision If the car has been involved in a collision, the text CRASH STATUS SEE MANUAL may appear in the information display. This indicates that the car's functionality has been reduced.


NOTE: This text can only be shown if the display is undamaged and the car's electrical system is intact.


COLLISION STATUS is a feature that is triggered if one or more of the safety systems (e.g. front or side airbags, an inflatable curtain, or one or more of the seat belt tensioners) has deployed. The collision may have damaged an important function in the car, such as the fuel lines, sensors for one of the safety systems, the brake system, etc.


WARNING!


Never attempt to repair the car yourself or to reset the electrical system after the car has displayed CRASH


STATUS SEE MANUAL. This could result in injury or improper system function.


Restoring the car to normal operating status should only be done by a trained and qualified Volvo service


technician.


After CRASH STATUS SEE MANUAL has been displayed, if you detect the odor of fuel vapor, or see any signs


of fuel leakage, do not attempt to start the car. Leave the car immediately.


Attempting to start the car If damage to the car is minor and there is no fuel leakage, you may attempt to start the car. To do so:


Remove the ignition key. Reinsert the key in the ignition switch. The car will then attempt to reset COLLISION STATUS to normal status. Try to start the car.


Moving the car If the electrical system is able to reset system status to normal (CRASH STATUS SEE MANUAL will no longer be shown in the display), the car may be moved carefully from its present position, if for example, it is blocking traffic. It should, however, not be moved farther than is absolutely necessary.


WARNING!


Even if the car appears to be drivable after COLLISION STATUS has been set, it should not be driven or towed (pulled by another vehicle). There may be concealed damage that could make it difficult or impossible to control. The car should be transported on a flatbed tow truck to a trained and qualified Volvo service technician for inspection/repairs.


pg. 27 Safety


Inspecting SRS system components


Inspection date 1. Driver's side airbag 2. Passenger's side airbag 3. Side airbag on the driver's side 4. Side airbag on the passenger's side 5. Driver's side inflatable curtain 6. Passenger's side inflatable curtain


WARNING!


There is no owner maintenance that can be performed on the SRS system. The month and year shown on the decal to the right (located on door pillar) indicate when you should contact your Volvo retailer for specific servicing or replacement of airbag system components. This service must be performed by a trained and qualified Volvo service technician.


pg. 28 Safety


Child safety


Children should be seated safely Volvo recommends the proper use of restraint systems for all occupants including children. Remember that, regardless of age and size, a child should always be properly restrained in a car.


Your car is also equipped with ISOFIX/ LATCH attachments, which make it more convenient to install child seats.


Some restraint systems for children are designed to be secured in the vehicle by lap belts or the lap portion of a lap- shoulder belt. Such child restraint systems can help protect children in cars in the event of an accident only if they are used properly. However, children could be endangered in a crash if the child restraints are not properly secured in the vehicle. Failure to follow the installation instructions for your child restraint can result in your child striking the vehicle's interior in a sudden stop.


Holding a child in your arms is NOT a suitable substitute for a child restraint system. In an accident, a child held in a person's arms can be crushed between the vehicle's interior and an unrestrained person. The child could also be injured by striking the interior, or by being ejected from the vehicle during a sudden maneuver or impact. The same can also happen if the infant or child rides unrestrained on the seat. Other occupants should also be properly restrained to help reduce the chance of injuring or increasing the injury of a child.


All states and provinces have legislation governing how and where children should be carried in a car. Find out the regulations existing in your state or province. Recent accident statistics have shown that children are safer in rear seating positions than front seating positions when properly restrained. A child restraint system can help protect a child in a vehicle. Here's what to look for when selecting a child restraint system:


It should have a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213) - or


in Canada, CMVSS 213.


Make sure the child restraint system is approved for the child's height, weight and development - the label required


by the standard or regulation, or instructions for infant restraints, typically provide this information.


In using any child restraint system, we urge you to carefully look over the instructions that are provided with the restraint. Be sure you understand them and can use the device properly and safely in this vehicle. A misused child restraint system can result in increased injuries for both the infant or child and other occupants in the vehicle.


When a child has outgrown the child safety seat, you should use the rear seat with the standard seat belt fastened. The best way to help protect the child here is to place the child on a cushion so that the seat belt is properly located on the hips. Legislation in your state or province may mandate the use of a child seat or cushion in combination with the seat belt, depending on the child's age and/or size. Please check local regulations.


A specially designed and tested booster cushion (not available in Canada) can be obtained from your Volvo retailer for children weighing 33 - 80 lb. (15 - 36 kg) and 38-54 inches (97 - 137 cm) in height.


pg. 29 Safety


Child safety


WARNING!


Do not use child safety seats or child booster cushions/backrests in the front passenger's seat. We also recommend that children under 4 feet 7 inches (140 cm) in height who have outgrown these devices sit in the rear seat with the seat belt fastened. Keep vehicle doors and trunk locked and keep keys out of a child's reach. Unsupervised children could lock themselves in an open trunk and risk injury. Children should be taught not to play in vehicles. On hot days, the temperature in the trunk or vehicle interior can rise very quickly. Exposure to these high temperatures for even a short period of time can cause heat-related injury or death. Small children are particularly at risk.


ISOFIX/LATCH anchors Lower anchors for ISOFIX-equipped child seats are located in the rear seats, hidden below the backrest cushions. Symbols on the seat back upholstery mark the anchor positions as shown. To access the anchors, kneel on the seat cushion and locate the anchors by feel. Always follow your child seat manufacturer's installation instructions.


pg. 30 Safety


Child safety


Automatic Locking Retractor/ Emergency Locking Retractor To make child seat installation easier, each seat belt (except for the driver's belt) is equipped with a locking mechanism to help keep the seat belt taut.


When attaching the seat belt to a child seat:


Attach the seat belt to the child seat according to the child seat manufacturer's instructions. Pull the seat belt out as far as possible. Insert the seat belt latch plate into the buckle (lock) in the usual way. Release the seat belt and pull it taut around the child seat.


A sound from the seat belt retractor will be audible at this time and is normal. The belt will now be locked in place. This function is automatically disabled when the seat belt is unlocked and the belt is fully retracted.


Volvo's recommendations Why does Volvo believe that no child should sit in the front seat of a car? It's quite simple really. A front airbag is a very powerful device designed, by law, to help protect an adult. Because of the size of the airbag and its speed of inflation, a child should never be placed in the front seat, even if he or she is properly belted or strapped into a child safety seat. Volvo has been an innovator in safety for over seventy- five years, and we'll continue to do our part. But we need your help. Please remember to put your children in the back seat, and buckle them up.


WARNING!


Do not use child safety seats or child booster cushions/backrests in the front passenger's seat. We also recommend that children who have outgrown these devices sit in the rear seat with the seat belt properly fastened.


Volvo has some very specific recommendations:


Always wear your seat belt. Airbags are a SUPPLEMENTAL safety device which, when used with a three-point seat belt can help reduce serious


injuries during certain types of accidents. Volvo recommends that you do not disconnect the airbag system in your vehicle.


Volvo strongly recommends that everyone in the vehicle be properly restrained. Volvo recommends that ALL occupants (adults and children) shorter than 4 feet 7 inches (140 cm) be seated in the


back seat of any vehicle with a front passenger side airbag.


Drive safely!


Contents | Top of Page


2 0 0 6
VOLVO


C70


Chapter 3 - Instruments and controls


pg. 31 Instruments and controls


32
Instrument panel 33
Indicator and warning symbols 34
Symbols on the left side of the instrument panel 35
Symbols on the right side of the instrument panel 36
Symbols on the center of the instrument panel 37
Information display 38
Lighting panel 39
Manually unlocking the fuel filler door 40
Left-side steering wheel lever 41
Trip computer 42
Cruise control 44
Right-side steering wheel lever Rain sensor 45
Steering wheel adjustment, Hazard warning flashers 46
47
Parking brake, 12 volt sockets 48
Power windows Mirrors 49
51
Personal settings Home Link® Universal Transceiver (option) 53


pg. 32 Instruments and controls


Instrument panel


1. Speedometer


2. Turn signal, left


3. Warning symbol See the next page for additional information.


4. Information display The display presents information and warning messages, the ambient temperature, and the clock, etc. When the ambient temperature is between 23° and 36°F (-5° and +2°C), a snowflake symbol is shown in the display. This symbol serves as a warning for possible slippery road surfaces. Please note that this symbol does not indicate a fault with your car. At low speeds, or when the car is not moving, the temperature readings may be slightly higher than the actual ambient temperature.


5. Information symbol See the next page for additional information.


6. Turn signal, right


7. Tachometer The tachometer shows engine speed in thousands of revolutions per minute (rpm). Do not drive continuously with the needle in the red area of the dial, which indicates maximum allowable engine rpm range. Instead, shift to a higher gear or slow the vehicle down. The engine management system will automatically prevent excessively high engines speeds. This will be noticeable as a pronounced unevenness in engine speed.


8. Indicator and warning symbols


9. Fuel gauge The fuel tank holds approximately 16.3 US gallons (62 liters). When a warning light in the gauge comes on, there are approximately 2.1 US gallons (8 liters) of fuel remaining in the tank.


10. Trip odometer reset button The trip odometers are used to measure short distances. Press the button briefly to switch between the odometer for the car's total mileage and the two trip odometers, T1 and T2. A long press (more than 2 seconds) resets the currently selected trip odometer.


11. Function display This window displays information on functions such as the odometer, trip odometers, optional rain sensor, and cruise control.


12. High beam indicator


13. Clock setting button Turn the button to set the time.


14. Temperature gauge The gauge indicates the temperature of the engine cooling system. If the temperature is abnormally high and the needle enters the red zone, a message is shown in the display. Bear in mind that auxiliary lamps in front of the air intake reduce the cooling capacity at high outside temperatures and high engine loads.


15. Indicator and warning symbols


pg. 33 Instruments and controls


Indicator and warning symbols


Function check The indicator and warning symbols light up when you turn the ignition key to the driving position (position II) before starting. This shows that the symbols are functioning. When the engine starts, all symbols go out. If the engine is not started within 5 seconds, all of the symbols except CHECK ENGINE and will go out. Certain symbols may not have their functions illustrated, depending on the car's equipment. The PARK BRAKE symbol will not go out until the parking brake has been released.


Symbols in the center of the instrument panel


Warning symbol


The red warning symbol lights up to indicate a fault that could affect the car's driveability. A text explaining the nature of the fault will also be shown in the information display. The symbol and accompanying text will remain on until the fault has been corrected. This symbol may also light up in combination with other indicator or warning symbols.


If the red warning symbol lights up:


1. Stop the car as soon as possible in a suitable location. 2. Read the message in the information display. 3. Follow the instructions provided, or contact a trained and qualified Volvo service technician.


Information symbol


The yellow information symbol lights up to alert the driver to a message in the information display. The message can be erased by pressing the READ button (see page 37), or will disappear automatically after two minutes. When the message "TIME FOR REGULAR SERVICE" is displayed, the text can be erased and the information symbol light can be turned off by pressing the READ button. The text will disappear and the symbol light will go out automatically after two minutes.


When the message "TIME FOR REGULAR SERVICE" is displayed, the text can be erased and the information symbol light can be turned off by pressing the READ button. The text will disappear and the symbol light will go out automatically after two minutes.


This symbol may also light up in combination with other indicator or warning symbols.


NOTE: The car can still be driven after the information symbol has come on. The car can be driven for 1-2 weeks after service-related information has been displayed.


pg. 34 Instruments and controls


Symbols on the left side of the instrument panel


Symbols - left side of instrument panel


1. Malfunction indicator light


As you drive, a computer called On-Board Diagnostics II (OBDII) monitors your car's engine, transmission,


electrical and emission systems. The CHECK ENGINE light will light up if the computer senses a condition that potentially may need correcting. When this happens, please have your car checked by a trained and qualified Volvo service technician as soon as possible.


A CHECK ENGINE light may have many causes. Sometimes, you may not notice a change in your car's behavior. Even so, an Symbols on the left side of the instrument panel uncorrected condition could hurt fuel economy, emission controls, and driveability. Extended driving without correcting the cause could even damage other components in your car. Canadian models are equipped with this symbol


2. Anti-lock Brake system (ABS)


If the warning light comes on, there is a malfunction of the ABS system (the standard braking system will still


function). The vehicle should be driven to a trained and qualified Volvo service technician for inspection. See page 111 for additional information. Canadian models are equipped with this symbol


3. Rear fog light


This symbol indicates that the rear fog light (located in the driver's side tail light cluster) is on.


4. Dynamic Stability and Traction Control system (DSTC)


This indicator symbol flashes when the DSTC (Dynamic Stability and Traction control system) is actively


working to stabilize the car. See page 113 for more detailed information.


5. Not in use


6. Fuel level warning light


When this light comes on, there are approximately 2.1 US gallons (8 liters) of fuel remaining in the tank.


pg. 35 Instruments and controls


Symbols on the right side of the instrument panel


Symbols - right side of instrument panel


1. Turn signal indicator for trailer (certain models)


If you are towing a trailer, this light will flash simultaneously with the turn signals on the trailer. If the light


does not flash when signaling, one of the turn signals on the trailer or on the car are not functioning properly.


2. Parking brake applied


This light is on when the parking brake (hand brake) is applied. The parking brake lever is situated between


the front seats. Always pull up this lever as far as possible when applying the parking brake. Canadian models are equipped with this symbol


3. SRS warning light


If this light comes on while the car is being driven, or remains on for longer than approximately 10 seconds


after the car has been started, the SRS system's diagnostic functions have detected a fault in a seat belt lock or tensioner, a front airbag, side impact airbag, and/or an inflatable curtain. Have the system(s) inspected by a trained and qualified Volvo service technician as soon as possible.


4. Oil pressure warning light


If the light comes on while driving, stop the car, stop the engine immediately, and check the engine oil level. If


the oil level is normal and the light stays on after restart, have the car towed to the nearest trained and qualified Volvo service technician. After hard driving, the light may come on occasionally when the engine is idling. This is normal, provided it goes off when the engine speed is increased.


5. Seat belt reminder


See page 13 for detailed information.


6.Generator warning light


If the light comes on while the engine is running, have the charging system checked by a trained and qualified


Volvo service technician.


7. Brake failure warning light


If this light comes on while driving or braking, stop the car as quickly as possible in a safe place, open the


hood, and check the brake fluid level in the reservoir. See page 157 for the location of the reservoir. Canadian models are equipped with this symbol


WARNING!


If the fluid level is below the MIN mark in the reservoir or if a "Brake failure - Service urgent" message is displayed in the information display: DO NOT DRIVE. Have the car towed to a trained and qualified Volvo service technician and have the brake system inspected.


pg. 36 Instruments and controls


Symbols on the center of the instrument panel


If the BRAKE and ABS warning lights come on at the same time, this could indicate a fault in the brake system.


In this case: 1. Stop the car in a suitable place and switch off the engine. 2. Restart the engine. 3. If both warning lights go off, no further action is required and the car can be driven. 4. If both lights remain on after the engine has been restarted, switch off the engine again and check the brake fluid level. See page 157 for the location of the reservoir.


Door open warning The driver will be alerted if one of the doors, the hood, or the trunk lid are open or ajar.


At low speeds


If the car is moving at a speed of less than approximately 4 m.p.h. (7 km/h), the Information symbol in the


instrument panel will light up and a message will be shown in the information display indicating which door(s), etc is not completely closed.


At higher speeds


If the car is moving at a speed above approximately 4 m.p.h. (7 km/h), the Warning symbol in the instrument


panel will light up and a message will be shown in the information display indicating which door(s), etc is not completely closed.


Hood and trunk


If the hood and/or trunk lid is not completely closed, the Information symbol in the instrument panel will light


up and a message will be displayed, regardless of the vehicle's speed.


pg. 37 Instruments and controls


Information display


Messages When an indicator or warning light in the instrument panel comes on, a message is also shown in the information display. To read a message:


Press the READ button (A).


Pressing READ repeatedly enables you to scroll to any other messages that may be stored.


If a message is displayed when e.g. you are using the trip computer, this message must be read before you can access the trip computer.


pg. 38 Instruments and controls


Lighting panel


1. Headlight/parking light switch 2. Instrument panel lighting 3. Front fog lights 4. Fuel filler door unlock button 5. Rear fog light


Parking lights The front and rear parking lights can be turned on even when the ignition is switched off.


Turn switch 1 to position


. The license plate lights also illuminate when the parking lights are switched on.


Headlights


Turn the ignition key to position II. The low beam headlights (daytime running lights) illuminate automatically, except when the light switch (1) is in


position


NOTE: See page 40 for information on switching between high and low beams.


Fog lights Front fog lights (option) The front fog lights can be used in combination with either the headlights or the parking lights.


Turn the ignition key to position II. Press button 3 to turn on the front fog lights.


An indicator light in the button illuminates when the front fog lights are on.


Rear fog light The single rear fog light is located in the driver's side tail light cluster. The rear fog light will only function in combination with the high/low beam headlights or the optional front fog lights.


Turn the ignition key to position II. Press button 5 to turn on the rear fog light.


An indicator light in the button illuminates when the rear fog light is on.


NOTE: The rear fog light is considerably brighter than the normal tail lights and should be used only when conditions such as fog, rain, snow, smoke or dust reduce visibility for other vehicles to less than 500 ft. (150 meters).


Instrument panel lighting The instrument panel lighting illuminates when the ignition key is in position II and the light switch (1) is in either position


or


Move the thumb wheel (2) up to increase brightness or down to decrease brightness.


Unlocking the fuel filler door With the ignition switched off, press button 4 to unlock the fuel filler door. Please note that the fuel filler door will remain unlocked until the car begins to move forward. An audible click will be heard when the fuel filler door re-locks. Please refer to the following page for instructions on manually opening the fuel filler door.


pg. 39 Instruments and controls


Manually unlocking the fuel filler door


Manually unlocking the fuel filler door If it should be necessary to manually unlock the fuel filler door from the trunk, the power retractable hard top should be up.


Remove the panel covering the tail light housing on the right side of the trunk. Pull the cord that is attached to a hook to pop open the fuel filler door.


When the fuel filler door has opened, return the cord to the hook and replace the tail light cover panel.


pg. 40 Instruments and controls


Left-side steering wheel lever


Lever positions 1. Turn signals, lane change position 2. Turn signals, position for normal turns 3. High beam flash 4. Toggle between high and low beams, Home Safe lighting


Turn signals When turning Move the lever as far up or down as possible (to position 2) to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.


When changing lanes The driver can flash the turn signals by moving the turn signal lever up or down to position 1 and releasing it. The turn


signals will flash three times and the lever will automatically return to its initial position.


NOTE: If the turn signal indicator flashes faster than normal, check for a burned-out turn signal bulb.


High/low beam headlights Continuous high beams


Turn the ignition key to position II. With the light switch (1) in position


, (see page 38) pull the turn signal lever toward the steering wheel


(position 4) to toggle between high and low beams.


High beam flash


Turn the ignition key to position II. Pull the turn signal lever to position 3. The high beams will remain on until the lever is released.


Home safe lighting When you leave your car at night, you can make use of the home safe lighting function to illuminate the area in front of the car.


Remove the key from the ignition switch. Pull the direction indicator lever as far as possible towards the steering wheel (to position 4) and release it. Exit the car and lock the doors.


The headlights and parking lights will illuminate and remain on for 301, 60 or 90 seconds. The time interval can be changed according to your preferences by using the Personal Settings function, see page 51 for more information.


1. Factory setting


pg. 41 Instruments and controls


Trip computer


Trip computer The trip computer stores information gathered from several systems in your car and has four menus (five on Canadian models) that can be shown in the information display.


Driving distance on current fuel reserve Average fuel consumption


Current fuel consumption Average speed


NOTE: Current speed in m.p.h. (Canadian models only)


NOTE: Warning messages from the car's monitoring systems will override the trip computer function. If a warning message is shown in the information display while you are using the trip computer, you must acknowledge the message by pressing the READ button (A). Press button A again to return to the trip computer function.


Controls The four trip computer functions (five on Canadian models) can be accessed by twisting INFO (B) one step at a time in either direction. Twisting a fifth time (sixth time on Canadian models) returns you to the original function. The trip computer can be reset (average fuel consumption and average speed will be erased from system memory) by pressing RESET (C) for at least five seconds.


Driving distance on current fuel reserve This function shows the approximate distance that can be driven on the fuel remaining in the tank. This calculation is based on average fuel consumption during the last 20 miles (30 km) of driving and the amount of fuel remaining in the tank when the reading was taken. When the driving distance on current fuel reserve is less than 12 miles (20 km), "---- " will be displayed in the information display.


Average fuel consumption This value indicates fuel consumption since the last time the trip computer was reset (by pressing RESET, button C). When the engine is switched off, information on fuel consumption is stored and remains in system memory until the RESET (button C) is pressed again.


Current fuel consumption This value indicates the current fuel consumption, based on readings taken once per second. When the car is not moving, "----" will be displayed.


Average speed This value indicates average speed since the last time the trip computer was reset (by pressing RESET, button C). When the engine is switched off, information on average speed is stored and remains in system memory until the RESET (button C) is pressed again.


Current speed in m.p.h. (Canadian models only) This function provides the driver with an instantaneous conversion of the car's current speed from km/h to m.p.h.


NOTE: Trip computer readings may vary slightly depending on the circumference of the tires on the car, tire inflation, or driving style.


pg. 42 Instruments and controls


Cruise control


Cruise control


The cruise control buttons are located on the left side of the steering wheel hub.


Engaging the cruise control function 1. Press the CRUISE button. CRUISE will appear in the function display in the center of the instrument panel.


NOTE: This does not set the vehicle's speed. 2. Press + or - to set the current speed. CRUISE ON will be displayed.


Increasing or decreasing speed Use + or - in the following ways to increase or decrease the vehicle's speed:


Press and hold down + or - until the vehicle reaches the desired speed. This will become the set speed when the


Press + or - for approximately a half second and release the button to increase or decrease vehicle speed by


button is released.


approximately 1 mph (1.6 km/h).


NOTE:


Cruise control will not function at speeds below 20 mph. (30 km/h). Momentary acceleration, for less than 1 minute (e.g. when passing another car), does not affect cruise control operation. The car will automatically return to the previously set speed when the accelerator pedal is released.


Temporarily disengaging the cruise control Press 0 to temporarily disengage cruise control. CRUISE will appear in the function display. The currently set speed is stored in the system's memory.


Cruise control is also automatically disengaged:


If the speed drops below approximately 20 mph (30 km/h) when driving uphill. When the brake or clutch pedal is depressed. If the gear selector is moved to position N. During wheel spin or wheel lock-up. If the vehicle's speed is increased by using the accelerator pedal for more than 1 minute.


Returning to the set speed


Press the button to resume the previously set speed.


pg. 43 Instruments and controls


Cruise control


Disengaging cruise control Cruise control can also be disengaged by:


Pressing the CRUISE button (CRUISE ON will no longer be shown in the function display. Putting the gear selector in (N)eutral.


WARNING!


Cruise control should not be used in heavy traffic or when driving on wet or slippery roads. Cruise control may not maintain set speed on steep downgrades.


pg. 44 Instruments and controls


Right-side steering wheel lever


Windshield wipers A. Windshield/headlight washers B. Rain sensor (option) - on/off C. Thumb wheel D. Not in use


Windshield wipers off


The windshield wipers are off when the lever is in position 0


Manual wiper function


From position 0, move the lever upward. The windshield wipers will sweep one stroke at a time for as long as


the lever is held up.


Intermittent wiper function


With the lever in this position, you can set the wiper interval by moving the thumb wheel (C) upward to


increase wiper speed or downward to decrease the speed.


Continuous wiper function


The wipers operate at "normal" speed.


High speed wiper function.


A - Windshield washers Pull the lever toward the steering wheel and release it. The wipers will make 2-3 sweeps across the windshield after the lever has been released.


CAUTION! Use ample washer fluid when washing the windshield to avoid scratching the glass.


Headlight washers (certain models) When the lever has been pulled, high pressure jets mounted in the bumper will spray the headlights. The following applies to conserve washer fluid (see page 38 for information on the light switch positions):


Low/high beam headlights on


The headlights will be washed the first time the windshield is washed. Thereafter, the headlights will only be


washed once for every five times the windshield is washed within a 10-minute period.


Parking lights on


Optional Bi-Xenon headlights will be washed once for every five times the windshield is washed. Normal halogen headlights will not be washed.


pg. 45 Instruments and controls


Rain sensor


B - Rain sensor (option) The rain sensor automatically regulates windshield wiper speed according to the amount of water on the windshield. The sensitivity of the rain sensor is adjusted by moving the thumb wheel (C in the illustration on the previous page) up (the wipers will sweep the windshield more frequently) or down (the wipers will sweep the windshield less frequently).


On/Off To activate the rain sensor: 1. Switch on the ignition. 2. Put the windshield wiper lever in position 0. 3. Press button B (see the illustration on the previous page). The rain sensor symbol will appear in the lower display. The rain sensor can be deactivated by:


Pressing button (B) with the ignition on. or Moving the windshield wiper lever down. If the lever is moved up, the rain sensor function will remain activated.


CAUTION! The rain sensor should be deactivated when washing the car in an automatic car wash, etc. If the rain sensor function is left on, the wipers will start inadvertently in the car wash and could be damaged.


The rain sensor is automatically deactivated:


When the key is removed from the ignition. Five minutes after the ignition is switched off if the key is left in the ignition.


C - Thumb wheel The thumb wheel is used to set the wiper interval when intermittent wiping is selected, or the sensitivity to the amount of rain on the windshield when the rain sensor is selected. Move the wheel upward or downward to increase/decrease wiper speed when the intermittent function is selected, or to increase/decrease the optional rain sensor's sensitivity when the this function is activated.


pg. 46 Instruments and controls


Steering wheel adjustment, Hazard warning flashers


Steering wheel adjustment Both the height and the reach of the steering wheel can be adjusted to a comfortable position for the driver. 1. Pull down the lever on the steering column to release the steering wheel. 2. Adjust the steering wheel to a suitable position 3. Press the lever back into place to lock the steering wheel in the new position. If necessary, press the steering wheel slightly while pressing the lever into the locked position. Check that the steering wheel is locked in the new position.


WARNING!


Never adjust the steering wheel while driving.


Hazard warning flashers The four-way flasher should be used to indicate that the vehicle has become a traffic hazard. To activate the flashers, press the triangular button in the center dash. Press the button again to turn off the flashers.


NOTE: Regulations regarding the use of the hazard warning flasher may vary, depending on where you live.


pg. 47 Instruments and controls


Parking brake, 12 volt sockets


Parking brake (hand brake) The parking brake lever is located between the front seats. The parking brake is applied to the rear wheels. The indicator light in the instrument panel lights up when the brake is applied. The indicator light also comes on if the parking brake is only applied "one click" - check that the lever is fully applied. To apply the parking brake: pull up firmly on the lever. To release the parking brake: pull the lever up slightly, press the button, lower the lever and release the button.


12 volt sockets The 12 volt sockets can be used to plug in certain accessories such as cellular telephones, etc. The key must be in position I (or higher) for the auxiliary socket to function.


NOTE:


The cover should be kept on when the auxiliary socket is not in use. Maximum current from the sockets is 10A.


Ashtrays/cigarette lighter The auxiliary sockets can also be used for cigarette lighters. Ashtrays and lighters are available as accessories. Please contact your Volvo retailer.


pg. 48 Instruments and controls


Power windows


Operation The power windows are opened and closed using the buttons in the armrests, or can be opened by pressing the unlock button on the central locking system's remote control (see page 87).


Opening/closing the windows from inside the car


NOTE:


The ignition must be ON (ignition key in position I, II or the engine running) for the power windows to function. The power windows will also function after the ignition has been switched off as long neither of the doors has been


opened.


Opening a window


Lightly press down the front edge of any of the buttons (A or B) to the first detent ("stop") to open a window to the


position of your choice.


WARNING!


Always remove the ignition key when the vehicle is unattended.


Never leave children unattended in the vehicle.


Make sure that the windows are completely unobstructed before raising or lowering them.


Press down the front part of one or both buttons A as far as possible and release to automatically open the front


window(s) completely.


To stop the window at any time, pull the button up.


Closing a window


Lightly pull up the front edge of any of the buttons (A or B) to the first detent ("stop") to close a window to the


Pull up the front part of one or both buttons A as far as possible and release to automatically close the front


position of your choice.


window(s) completely.


All windows Button C can be used to open or close all of the windows at the same time.


Briefly press the right side of the button to automatically open all of the windows. Press and hold down the left side of the button to close all of the windows.


pg. 49 Instruments and controls


Mirrors


Rearview mirror Auto-dim function A sensor at the lower edge of the mirror reacts to headlights from following traffic and automatically reduces glare.


Rearview mirror with compass (option) The upper right-hand corner of the rearview mirror has an integrated display that shows the compass direction toward which the car is pointing. Eight different directions can be displayed: N, NE, E, SE, S, SW, W and NW. The display shows your car's orientation with respect to true north.


Calibrating the compass The compass may need to be calibrated in certain cases. If calibration is required, the character C appears in the mirror's display.


To calibrate the mirror: 1. Stop the car in a large, open area, away from traffic. 2. Start the car. 3. Using a pen or similar object, hold the button (1) depressed for at least six seconds. The character C will be displayed again. 4. Drive slowly in a circle at a maximum speed of 6 m.p.h. (10 km/h) until a compass direction is displayed. Calibration is complete.


pg. 50 Instruments and controls


Mirrors


Adjusting the zone The earth is divided into 15 magnetic zones. The compass is adjusted for the zone to which the car was delivered. Select a different zone as follows: 1. Turn on the ignition. 2. Using a pen or similar object, hold the button (1 in the illustration on the previous page) depressed for at least 3
seconds. The number for the current area is displayed. 3. Press the button repeatedly until the number for the required geographical area (1-15) is displayed.


A few seconds after browsing is complete, the display reverts to the compass direction.


Power door mirrors The mirror control switches are located on the driver's door armrest. To adjust the mirrors: Driver's door mirror: Press the L button (a light in the switch will go on) to activate the adjustment control. Use this control to adjust the driver's door mirror. Passenger's door mirror: Press the R switch (a light in the switch will go on) to activate the adjustment control. Use this control to adjust the passenger's door mirror. After you have adjusted the mirror(s), press the L or R switch again (the LED will go out) to deactivate the adjustment control.


WARNING!


The mirrors should always be adjusted prior to driving. Objects seen in the passenger's side wide-angle door mirror are closer than they appear to be.


Storing the mirrors' position The position of the power door mirrors is stored when the car is locked with the remote control. When the car is unlocked with the same remote control, the mirrors will move to the stored position.


pg. 51 Instruments and controls


Personal settings


Control panel A - Display B - Menu button C - Exit button D - Enter button E - Menu navigation controls Personal settings can be made for some of the car's functions, such as the central locking system, climate control, and the audio system. Please refer to page 185 for more information on the audio functions that can be adjusted. The settings are presented in the display (A). To access the menu and adjust settings: 1. Press MENU (B). 2. Scroll to "Car Settings" using the menu navigation control (E). 3. Press ENTER (D). 4. Select an alternative using the menu navigation control (E). 5. Confirm your selection by pressing ENTER. To exit the menu: Press EXIT (C).


Available settings Lock confirmation light When the car is locked/unlocked with the remote control, the direction indicators can be selected to flash to confirm the action. The alternatives On/Off are available for both locking and unlocking.


Autolock When the car starts to move, the doors and trunk can be locked automatically. The alternatives On/Off are available.


Unlock There are two alternatives for unlocking: 1. Global (All doors) Unlocks all doors and the trunk with one press on the remote control. 2. Two Step (Two-stage unlocking) This alternative unlocks the driver's door with one press on the remote control. A second press unlocks the passenger's door and the trunk.


Approach lighting This alternative determines the length of time for which the car's lights will remain on when the Approach light button


on the central locking system's remote control is pressed. Intervals of 30/60/90 seconds may be selected. See page 87
for more information.


Home safe lighting This alternative determines the length of time for which the car's lights will remain on when the high beam lever on the steering column is pulled toward the wheel with the ignition


pg. 52 Instruments and controls


Personal settings


switched off. Intervals of 30/60/90 seconds may be selected. See page 40 for information on using this function.


Information


VIN number: The VIN (Vehicle Identification Number) is the car's unique identity number. Number of Keys: The number of keys registered for the car is displayed here.


Climate functions


Blower speed in AUTO mode: The blower speed can be set to AUTO mode in models equipped with ECC. Choose


between "Low", "Normal" and "High".


Timer for recirculation: When the timer is active, the air recirculates in the car for 3-12 minutes depending on the


ambient temperature. Select On/Off depending on whether the recirculation timer is to be active or not.


Reset to factory settings Use this alternative to return to the default climate system settings.


pg. 53 Instruments and controls


Home Link® Universal Transceiver (option)


Introduction HomeLink* is an advanced system that can be programmed to learn the codes of three different remote controlled- devices (e.g., garage door openers, remote lighting, entry door lock). HomeLink's sun visor-mounted transceiver, powered by your car's electrical system, may then be used in place of your hand-held remote controls.


NOTE: For your security, the HomeLink Universal Transceiver is designed to not function if you lock your car from the outside.


Programming the transceiver


1. The ignition switch must be turned to the "accessory" position (II) before programming the HomeLink Universal Transceiver.


2. Begin by erasing all 3 factory default channels. Hold down the two outside buttons (the left and right buttons in the illustration) on the HomeLink Universal Transceiver for about 20 seconds, until HomeLink's indicator light begins to flash. Then release the buttons.


3. Hold your hand-held transmitter (garage door opener, for example) 2 to 5 in. (5 to 12 cm) away from the HomeLink surface, keeping the indicator light in view. For placement questions, contact HomeLink toll-free 1-800-355-3515
(Internet: http://www.HomeLink.com).


4. Using two hands, push and hold both your hand-held transmitter's button and the transceiver button you wish to program. The indicator light will flash first slowly, then rapidly. Rapid flashing indicates that the HomeLink button has been successfully programmed. Release both buttons.


5. If you are programming a rolling code-equipped device (e.g., garage door opener or entry door lock), refer to "Programming rolling codes" on the next page to complete the programming process.


6. Repeat steps 3 and 4 to program the other two transceiver buttons. If, after several attempts, you are unable to successfully train the HomeLink Universal Transceiver to learn your hand-held transmitter's signal, contact HomeLink toll-free 1-800-355-3515 (Internet: http://www.HomeLink.com).


* HomeLink is a registered trademark of Johnson Controls, Intl. ©JCI, All rights reserved


WARNING!


If you use HomeLink to open a garage door or gate, be sure no one is near the gate or door while it is in motion. Do not use the HomeLink Universal Transceiver with any garage door opener that lacks safety "stop" and "reverse" features as required by federal safety standards. (This includes any garage door opener model manufactured before April 1, 1982) A garage door opener that cannot "detect" an object, signalling the door to "stop" and "reverse" does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. For more information on this matter, call toll-free 1-800-355-3515.


(Internet: http://www.HomeLink.com)


pg. 54 Instruments and controls


Home Link® Universal Transceiver (option)


Canadian residents: During programming, your hand-held transmitter may automatically stop transmitting. To successfully train HomeLink, continue to hold the HomeLink button. At the same time, repeatedly press and hold your hand-held transmitter's button at two-second intervals until HomeLink has learned your transmitter's code. The HomeLink indicator light will flash first slowly, and then rapidly to indicate that the button has been successfully programmed.


Determining if your garage door uses a rolling code Determine, in one of the following ways, if your garage door uses a rolling code system and is manufactured after 1996:


Refer to the garage door opener owner's manual for verification.


If your hand-held transmitter appears to program the HomeLink Universal Transceiver but the programmed button


does not activate the garage door, your garage door opener may have a rolling code.


Press the programmed HomeLink button. If the garage door opener has the rolling code feature, the HomeLink


indicator light flashes rapidly and then glows steadily after approximately 2 seconds.


To train a rolling code garage door opener, follow these instructions after programming the desired transceiver button according to "Programming the transceiver." The help of a second person may make training easier. 1. Locate the training button on the garage door opener motor head unit. The location and color of the training button may vary. If you encounter difficulty, refer to the garage door opener owner's manual or call toll-free 1-800-355-3515
(Internet: http://www.HomeLink.com).


2. Press the "training" button on the garage door opener motor head unit until the "training" light comes on.


3. Press and release the programmed HomeLink button. Press and release the programmed HomeLink button a second time to complete the training process.


4. Some garage door openers may require you to do this procedure a third time to complete the training.


5. The programmed button on your HomeLink Universal Transceiver should now operate your garage door opener. The original handheld transmitter can also be used, as desired, to operate the garage door.


The remaining two HomeLink buttons can be programmed in the same way. In the event of any problems in programming the HomeLink Universal Transceiver, call toll-free 1-800- 355-3515 (Internet: http://www.HomeLink.com).


Operating the HomeLink Universal Transceiver


Once programmed, the HomeLink Universal Transceiver can be used in place of your handheld transmitters. To operate, the key must be turned to the "accessory" position (II) or the engine must be running. Press the programmed HomeLink button to activate the garage door, driveway gate, security lightning, home security system etc. Your original hand-held transmitters may, of course, be used at any time.


Erasing programmed buttons Individual buttons cannot be erased, To erase all three programmed buttons: 1. Turn the ignition key to the "accessory" position (II). 2. Hold down the two outside buttons on the HomeLink Universal Transceiver for about 20 seconds, until HomeLink's indicator light begins to flash. 3. Release both buttons.


pg. 55 Instruments and controls


Home Link® Universal Transceiver (option)


The HomeLink buttons can be reprogrammed using the procedures described on the previous page.


Reprogramming a single HomeLink button 1. Press and hold the desired HomeLink button. Do not release the button until step 3 has been completed.


2. When the indicator light begins to flash slowly (after approximately 20 seconds), position your hand-held transmitter 2 to 5 in. (5 to 12 cm) away from the HomeLink surface.


3. Press and hold the hand-held transmitter button. The HomeLink indicator light will flash first slowly, then rapidly. When the indicator light flashes rapidly, release both buttons.


The previously programmed device has now been erased and the new device can be activated by pressing the HomeLink button that has just been programmed. This procedure will not affect any other programmed HomeLink buttons


NOTE:


Retain the original transmitter(s) for future programming procedures (e.g., if you purchase a new vehicle). For your own security, erase all programmed buttons on the HomeLink Universal Transceiver when you sell your


Metallic sun protection films should not be used on any windows in a vehicle equipped with HomeLink Universal


Transceiver. This could interfere with the transceivers function.


vehicle.


pg. 56 Instruments and controls


This page left intentionally blank.


Contents | Top of Page


2 0 0 6
VOLVO


C70


Chapter 4 - Climate


pg. 57 Climate


58
General information Air vents 59
Electronic climate control (ECC) 60
Air distribution 63


pg. 58 Climate


General information


Air conditioning - A/C Your car is equipped with Electronic Climate Control (ECC), which automatically maintains the selected temperature in the passenger compartment and helps dehumidify the air.


NOTE:


The air conditioning system can be switched off, but for optimal air quality in the passenger compartment and to


prevent the windows from fogging, the air conditioning should be left on - even in cool weather.


In warm weather, a small amount of water may accumulate under the car when it has been parked. This water is


condensation from the A/C system and is normal.


Ice and snow Always keep the air intake grille at the base of the windshield free of snow.


Climate control maintenance Special tools and equipment are required to maintain and carry out repairs on the climate system. Work of this type should only be done by a trained and qualified Volvo service technician.


Refrigerant Volvo cares about the environment. The air conditioning system in your car contains a CFC-free refrigerant - R134a. This substance will not deplete the ozone layer. The system contains 1.2 lbs (530 g) R134a (HFC 134a), and uses PAG oil.


Passenger compartment filter Replace the cabin air filter with a new one at the recommended intervals. Please refer to your Warranty and Service Records Information booklet, or consult a trained and qualified Volvo service technician for these intervals. The filter should be replaced more often when driving under dirty and dusty conditions. The filter cannot be cleaned and therefore should always be replaced with a new one.


NOTE: There are different types of cabin air filters. Ensure that the correct type is installed.


Display The display above the climate control panel shows the climate settings that have been made.


Personal settings There are two functions in the climate system that can be set to your preferences:


Blower speed in Auto mode. Timer controlled recirculation of the air in the passenger compartment. For information about how to make these


settings, see the Personal settings section on page 52.


Climate system sensors The sunlight sensor on the upper side of the dashboard and the passenger compartment temperature sensor, located behind the climate system control panel, should not be obstructed.


Acceleration The air conditioning system is temporarily switched off during full throttle acceleration.


pg. 59 Climate


Air vents


Air vents in the dashboard A. Open B. Closed C. Horizontal air flow D. Vertical air flow Direct the outer air vents toward the side windows to defrost.


pg. 60 Climate


Electronic climate control (ECC)


1. Auto - On/Off 2. Blower speed 3. Recirculation 4. Defroster 5. Airflow controls 6. A/C - ON/OFF 7. Heated driver's seat 8. Heated front passenger's seat 9. Rear window and door mirror defrosters 10. Temperature selector


ECC functions


1. Auto -On/Off


The AUTO function automatically regulates climate control to maintain the desired temperature. The


automatic function controls heating, air conditioning, blower speed, recirculation, and air distribution. When the retractable hard top is down, warm or cool air from the climate system is directed downward in the passenger compartment, and the climate system's effect is limited if it is not possible to compensate for the ambient temperature. If you select one or more manual functions, the remaining functions continue to be controlled automatically. All manual settings are switched off when AUTO is switched on. AUTO CLIMATE is shown in the display.


2. Blower speed


The blower speed can be increased or decreased by turning the knob. The blower speed is regulated


automatically if AUTO is selected. The previously set blower speed is disconnected.


NOTE: If the knob is turned counterclockwise and the blower indication in the display goes out, the blower and the air conditioning are switched off. The display shows the blower symbol and OFF.


3. Recirculation


This function can be used to shut out exhaust fumes, smoke, etc from the passenger compartment. The air


in the passenger compartment is then recirculated, i.e. no air from outside the car is taken into the car when this function is activated.


pg. 61 Climate


Electronic climate control (ECC)


If the air in the car recirculates for too long, there is a risk of condensation forming on the insides of the windows, especially in winter.


Timer The timer function minimizes the risk of fogging, or stale air when the recirculation function is selected. See page 52
for information on setting the recirculation timer.


NOTE: Recirculation is always disengaged if the defroster button is engaged to clear ice or condensation from the side windows.


4. Defroster


Directs airflow to the windshield and side windows and increases blower speed. The LED in the defroster


button lights up when this function is activated. The air conditioning system is controlled to provide maximum air dehumidification. The air is not recirculated.


5. Airflow controls


Press one of the three buttons in the illustration to activate the selected airflow. A symbol in the display


above the climate control panel and a lit LED in the selected button indicate that the manual function has been selected. With manually selected airflow both warm and cool air can be selected. See also the table on page 63.


6. Air conditioning On/Off


The air conditioning system is controlled automatically by the system when the ON LED is lit to maintain


the selected temperature. When OFF is selected and the OFF LED is lit, the air conditioning system is deactivated. Other functions are still controlled automatically. When Defroster (4) is selected, the air conditioning system is activated for maximum dehumidifying.


7 and 8. Heated front seats (option)


Maximum heating: Press the button once - both LEDs light up.


Reduced heating: Press the button a second time - one LED lights up. Seat heating off: Press the button a third time - no LEDs are lit.


9. Rear window and door mirror defrosters


Press to defrost the rear window and door mirrors.


The rear window and door mirrors are defrosted simultaneously if the switch is pressed once. The function is active if one LED is lit in the switch. The door mirrors are deactivated automatically after approximately 6 minutes. The rear window is deactivated after approximately 12 minutes. NOTE: This function is automatically switched off when the power retractable hard top is down.


10. Temperature selector


The temperatures on the driver's and passenger's sides can be set separately using the knob (with the


thermometer in it). The temperature can be set for both sides of the car when the ignition is switched on (both LEDs will be on), which means that a temperature setting will apply to both sides of the car. To set the temperature on one side of the car:


pg. 62 Climate


Electronic climate control (ECC)


Press the knob once. The LED for one side of the car will light up. Turn the knob to adjust the temperature. Press the knob a second time to set the temperature on the opposite side of the car. Press the knob a third time to set the temperature on both sides of the car the same time.


NOTE: Selecting a temperature that is higher or lower than necessary will not heat or cool the passenger compartment faster.


pg. 63 Climate


Electronic climate control (ECC)


pg. 64 Climate


This page left intentionally blank.


Loading...
x