2009 Toyota Tacoma Owners Manual

Headlights

Parking and front side marker lights

Front turn signal lights

Front fog lights

403

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 404 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n Rear bulb locations

High mounted stoplight

Rear turn signal lights

Back-up lights

License plate lights

Replacing light bulbs

n Headlights

Unplug the connector.

404

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 405 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

Remove the rubber cover.

Release spring.

the bulb

retaining

Remove the bulb.

To install a new bulb, align the tabs of the bulb with the cutouts of the mounting hole.

405

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 406 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n Front fog lights (if equipped)

Unplug the connector while pull- ing the lock release.

Turn the bulb counterclockwise.

406

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 407 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n Parking and front side marker lights

Turn the bulb base counterclock- wise.

Remove the light bulb.

407

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 408 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n Front turn signal lights

Turn the bulb base counterclock- wise.

Remove the light bulb.

408

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 409 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n Back-up lights and rear turn signal lights

Remove the bolts and rear com- bination assembly.

Unplug depressing the lock release.

the connector while

Turn the bulb bases counter- clockwise.

Rear turn signal light Back-up light

Remove the light bulb. Rear turn signal light Back-up light

409

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 410 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n High mounted stoplight

Remove the screws and cover.

Remove the light bulbs.

410

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 411 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n License plate lights

Remove the screw and light unit.

Turn the bulb base counterclock- wise.

Remove the light bulb.

411

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 412 Tuesday, April 8, 2008 9:01 AM

4-3. Do-it-yourself maintenance

n Lights other than the above

If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. • Stop/tail lights • Rear side marker lights

n Condensation build-up on the inside of the lens

Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. l Large drops of water are built up on the inside of the lens. l Water has built up inside the headlight.

n LED light bulbs

The stop/tail and rear side marker lights consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. If two or more LEDs in a stop light burn out, your vehicle may not conform to local laws (SAE).

CAUTION

n Replacing light bulbs

l Turn off the headlights. Do not attempt to replace the bulb immediately

after turning off the headlights. The bulbs become very hot and may cause burns.

l Do not touch the glass portion of the light bulb with bare hands. Hold the

bulb by the plastic or metal portion. If the bulb is scratched or dropped it may blow out or crack.

l Fully install light bulbs and any parts used to secure them. Failing to do so may result in heat damage, fire, or water entering the headlight unit. This may damage the headlights or cause condensation to build up on the lens.

n To prevent damage or fire

Make sure bulbs are fully seated and locked.

412

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 414 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information If your vehicle needs to be towed

If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws. The wheels and axle on the ground must be in good condition. If they are damaged, use a towing dolly or flat bed truck.

Before towing

The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. l The engine is running, but the vehicle will not move. l The vehicle makes an abnormal sound.

Emergency towing (4WD models and PreRunner only)

If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet/hook. This should only attempted on hard, surfaced roads for short distances at low speeds. A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition.

Vehicles without off-road package

Towing eyelet

414

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 415 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information

Vehicles with off-road package

Towing hook

n Emergency towing procedure

The engine switch must be in the ACC (engine off) or the ON (engine running) position. 4WD models: Put the front-wheel drive control switch in H2. Put the shift lever in N. Release the parking brake.

CAUTION

n Caution while towing

l Use extreme caution when towing the vehicle.

Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet/hook and the cables or chains. If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult.

415

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 416 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information

NOTICE

n Emergency towing eyelet/hook precautions

l Before emergency towing, check that the eyelet/hook is not broken or

damaged.

l Fasten the towing cable or chain securely to the eyelet/hook. l Do not jerk the eyelet/hook. Apply steady and even force. l To avoid damaging the eyelet/hook, do not pull from the side or at a verti-

cal angle. Always pull straight ahead.

Towing with a sling-type truck

NOTICE

n To prevent body damage

Do not tow with a sling-type truck, either from the front or rear.

416

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 417 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information

Towing with a wheel lift-type truck from the front

Vehicles with an automatic trans- mission: Use a towing dolly under the rear wheels. 2WD models with a manual transmission: We recommend to use a towing dolly under the rear wheels.

When not using a towing dolly, release the parking brake and shift the shift lever to N.

4WD models with a manual transmission: We recommend to use a towing dolly under the rear wheel.

When not using a towing dolly, release the parking brake, shift the shift lever to N and put the front-wheel drive control switch in H2.

NOTICE

n To prevent causing serious damage to the transmission (vehicles with

an automatic transmission) Never tow this vehicle wheels on the ground.

417

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 418 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information

Towing with a wheel lift-type truck from the rear

2WD models

Turn the engine switch to the ACC position.

4WD models

We recommend to use a towing dolly under the front wheels.

When not using a towing dolly, turn the engine switch to the ACC position, shift the shift lever to N and put the front-wheel drive con- trol switch in H2.

NOTICE

n To prevent damaging the vehicle

l Do not tow the vehicle with the key removed or in the LOCK position.

The steering lock mechanism is not strong enough to hold the front wheel straight.

l When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.

418

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 419 Tuesday, April 8, 2008 9:01 AM

Using a flat bed truck

Front

5-1. Essential information

If your Toyota is transported by a flat bed truck, it should be tied down at the locations shown in the illustration.

If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. Apply the parking brake firmly.

419

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 420 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information If you think something is wrong

If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. n Visible symptoms

l Fluid leaks under the vehicle

(Water dripping from the air conditioning after use is normal.)

l Flat-looking tires or uneven tire wear l Engine coolant temperature gauge needle continually points

higher than normal n Audible symptoms

l Changes in exhaust sound l Excessive tire squeal when cornering l Strange noises related to the suspension system l Pinging or other noises related to the engine

n Operational symptoms

l Engine missing, stumbling or running rough l Appreciable loss of power l Vehicle pulls heavily to one side when braking l Vehicle pulls heavily to one side when driving on a level road l Loss of brake effectiveness, spongy feeling, pedal almost

touches the floor

420

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 421 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information Fuel pump shut off system

To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine.

Follow the procedure below to restart the engine after the system is activated.

Turn the engine switch to the ACC or LOCK position. Restart the engine.

NOTICE

n Before starting the engine

Inspect the ground under the vehicle. If you find that fuel has leaked onto the ground, the fuel system has been damaged and is in need of repair. Do not restart the engine.

421

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 422 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information Event data recorder

Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.

In a crash or a near car crash event

The SRS airbag sensor assembly contains the EDR. In a crash or a near car crash event, this device may record some or all of the follow- ing information: l Engine speed l Whether the brake pedal was applied or not l Vehicle speed l To what extent the accelerator pedal was depressed l Position of the transmission shift lever l Whether the driver and front passenger wore seat belts or not l Driver’s seat position l SRS airbag deployment data l SRS airbag system diagnostic data l Front passenger’s occupant classification The information above is intended to be used for the purpose of improving vehicle safety performance. Unlike general data recorders, the EDR does not record sound data such as conversation between passengers.

422

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 423 Tuesday, April 8, 2008 9:01 AM

5-1. Essential information

Disclosure of the data

Toyota will not disclose the data recorded in an EDR to a third party except when: l An agreement from the vehicle’s owner (or the leasing company for

a leased vehicle) is obtained

l Officially requested by the police or other authorities l Used as a defense for Toyota in a law suit l Ordered by a court of law However, if necessary Toyota will: l Use the data for research on Toyota vehicle safety performance l Disclose the data to a third party for research purposes without dis- closing details of the vehicle owner, and only when it is deemed necessary

l Disclose summarized data cleared of vehicle identification informa-

tion to a non-Toyota organization for research purposes

423

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 424 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds...

Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system.

Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.

The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer.

Warning light

Warning light/Details

Brake system warning light (warning buzzer)* • Low brake fluid • Malfunction in the brake system This light also comes on when the parking brake is not released. If the light turns off after the parking brake is fully released, the system is operating nor- mally.

*: Parking brake engaged warning buzzer:

The buzzer sounds to indicate that parking brake is still engaged (with the vehicle having reached a speed of 3 mph [5 km/h])

424

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 425 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Stop the vehicle immediately.

The following warnings indicate the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer.

Warning light

Warning light/Details

Charging system warning light Indicates a malfunction in the vehicle’s charging sys- tem.

Low engine oil pressure warning light Indicates that the engine oil pressure is too low*.

*: The light may come on when the oil level is extremely low. It is not designed to indicate low oil level, and the oil level must be checked using the engine oil level dipstick.

Have the vehicle inspected immediately.

Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately.

Warning light

Warning light/Details

Malfunction indicator lamp Indicates a malfunction in: • The electronic engine control system; • The electronic throttle control system; • The electronic automatic transmission control sys- tem; or • Emission control system.

425

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 426 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Warning light

Warning light/Details

SRS warning light Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; • The passenger airbag off switch (Access Cab mod- els); or • The seat belt pretensioner system.

ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system.

(U.S.A.)

(Canada)

Slip indicator light The indicator light comes on to indicate a malfunc- tion in: • The VSC; • The TRAC; • The active traction control system (if equipped); • The AUTO LSD; • The downhill assist control system (if equipped); or • The hill-start assist control system (if equipped). Automatic transmission fluid temperature warn- ing light Indicates that the automatic transmission fluid tem- perature is too high.

(if equipped)

426

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 427 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Follow the correction procedures.

After taking the specified steps to correct the suspected problem, check that the warning light turns off.

Warning light

Warning light/Details

Correction procedure

(On the instrument

cluster)

(On the center panel)

Open door warning light Indicates that a door is not fully closed. Driver’s seat belt reminder light (warning buzzer)*1
Warns the driver to fas- ten his/her seat belt. Front passenger’s seat belt reminder light (warning buzzer)*2
Warns the front passen- ger to fasten his/her seat belt. Tire pressure warning light • When the light comes on: Low tire inflation pres- sure. • When the light stays on after blinking for 1 minute: Malfunction in the tire pressure warning system.

Low fuel level warning light Low level of fuel.

Check that all doors are closed.

Fasten the seat belt.

Fasten the seat belt.

Adjust the tire inflation pressure.

Have the system checked by your Toyota dealer.

Refuel the vehicle.

427

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 428 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Warning light

Warning light/Details

Correction procedure

(U.S.A.)

Engine oil replacement reminder light • Illuminates for about 3 seconds and then flashes for about 12 seconds: Indi- cates that the engine oil is scheduled to be changed. • Comes on and remains: Indicates that the engine oil should be changed.

Check the engine oil, and change if neces- sary.

Check and change the engine oil.

*1: Driver’s seat belt reminder:

The driver’s seat belt reminder sounds to alert the driver that his or her seat belt is not fastened. Once the engine switch is turned to the ON or START position, the buzzer sounds for 6 seconds. If the vehicle has reached a speed of at least 12 mph (20 km/h), the buzzer sounds intermittently for 10
seconds. Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds.

*2: Front passenger’s seat belt reminder:

The front passenger’s seat belt reminder sounds to alert the front passenger that his or her seat belt is not fastened. The buzzer sounds intermittently for 10 seconds after the vehicle has reached a speed of at least 12 mph (20 km/ h). Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds.

428

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 429 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

n Key reminder buzzer

The buzzer indicates that the key has not been removed (with the engine switch in the ACC or LOCK position and the driver’s door opened).

n If the malfunction indicator lamp comes on while driving

First check the following:

Is your vehicle low on gas? If it is, refuel the vehicle immediately. Is the fuel tank cap loose? If it is, tighten it securely.

The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible.

n Front passenger detection sensor and passenger seat belt reminder

If luggage or other load is placed on the front passenger seat, depending on its weight, the reminder light to flash and buzzer to sound.

n When the tire pressure warning light comes on

Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire pressure warning reset switch does not turn off the tire pressure warning light.

n The tire pressure warning light may turn on due to natural causes

The tire pressure warning light may turn on due to natural causes such as natural air leaks or tire inflation pressure changes caused by temper- ature. In this case, adjusting the tire inflation pressure will turn off the warning light (after a few minutes).

n When a tire is replaced with a spare tire

The temporary spare tire is not equipped with the tire pressure warning valve and transmitter. If a tire goes flat, the tire pressure warning light will not turn off even though the flat tire is replaced with the temporary spare tire. Replace the temporary spare tire with the repaired tire and adjust the proper tire inflation pressure. The tire pressure warning light will turn off after a few minutes.

429

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 430 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

n If the tire pressure warning system is inoperative

The tire pressure warning system will be disabled in the following condi- tions: (When the condition becomes normal, the system will work properly.)

If tires not equipped with tire pressure warning valves and transmit- ters are used. If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer. If the tire inflation pressure is 73 psi (500 kPa, 5.1 kgf/cm2 or bar) or higher.

The tire pressure warning system may be disabled in the following condi- tions: (When the condition becomes normal, the system will work properly.)

If electronic devices or facilities using similar radio wave frequencies are nearby. If a radio set at similar frequencies is in use in the vehicle. If a window tint that affects the radio wave signals is installed. If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) If tire chains are used.

n If the tire pressure warning light comes on after blinking for 1

minute frequently If the tire pressure warning light comes on after blinking for 1 minute fre- quently when the engine switch is turned to the ON position, have it checked by your Toyota dealer.

n After changing the engine oil (U.S.A. only)

Make sure to reset the oil maintenance data. (→P. 361)

n Customization that can be configured at Toyota dealer

The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features →P. 493)

430

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 431 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

CAUTION

n If the tire pressure warning light comes on

Be sure to observe the following precautions. Failure to do so could cause loss of vehicle control and result in death or serious injury. l Stop your vehicle in a safe place as soon as possible. Adjust the tire

inflation pressure immediately. If the tire pressure warning light comes on even after tire inflation pres- sure adjustment, it is probable that you have a flat tire. Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer.

l Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate,

you could lose control of the steering wheel or the brakes.

n If a blowout or sudden air leakage should occur

The tire pressure warning system may not activate immediately.

n Maintenance of the tire

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a differ- ent size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (tire pressure warning light) illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under- inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.

431

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 432 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

CAUTION

Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light). Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illumi- nated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illumi- nated, the system may not be able to detect or signal low tire pressure as intended. TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly. Always check the TPMS (tire pres- sure warning system) malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alter- nate tires and wheels allow the TPMS (tire pressure warning system) to continue to function properly.

NOTICE

n Precaution when installing a different tire

When a tire of a different specification or maker is installed, the tire pres- sure warning system may not operate properly.

432

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 433 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If you have a flat tire

Remove the flat tire and replace it with the spare provided. n Before jacking up the vehicle

l Stop the vehicle on a hard, flat surface. l Set the parking brake. l Shift the shift lever to P (automatic transmission) or R (manual

transmission).

l Stop the engine. l Turn on the emergency flashers.

n Location of the spare tire

n Location of the jack and tools

Regular Cab models

Jack

Tool bag

433

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 434 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Access Cab models

Tool bag

Jack

Double Cab models

Tool bag

Jack

Taking out the jack and tool bag

Regular Cab models

Pull the lever and fold down the seatback.

434

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 435 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Unhook the strap and remove the tool bag.

Loosen and remove the jack.

Loosen Tighten

Access Cab models

Pull up the lever Raise the bottom cushion up.

Turn the knob counterclockwise.

435

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 436 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Open the lid. Press the lid against the bot- tom of the lower cushion until it is supported by the hook- and-loop fastener. Make sure that the lid is sup- ported to prevent it from closing unexpectedly.

Unhook the strap and remove the tool bag.

Loosen and remove the jack.

Loosen Tighten

Double Cab models

Swing the bottom cushion up by pulling the lock release strap.

436

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 437 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Turn the knob counterclock- wise. Open the lid.

Unhook the strap and remove the tool bag.

Loosen and remove the jack.

Loosen Tighten

437

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 438 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Assemble the jack handle (in the tool bag)

Assemble the jack handle exten- sion as shown. Be sure to tighten each screw securely.

Taking out the spare tire

Insert the end of the jack handle extension lowering screw and turn it counterclock- wise.

into

the

After the tire is lowered com- pletely to the ground, remove the holding bracket.

438

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 439 Tuesday, April 8, 2008 9:01 AM

Replacing a flat tire

5-2. Steps to take in an emergency

Chock the tires.

Flat tire

Front

Rear

Left- hand side

Right- hand side

Left- hand side

Right- hand side

Wheel chock

positions Behind the rear right- hand side tire Behind the rear left- hand side tire In front of the front right-hand side tire In front of the front left-hand side tire

439

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 440 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Remove the wheel ornament using the wheel nut wrench as shown. To protect the wheel and wheel ornament, place a rag between the wrench and the wheel ornament, as shown in the illustration.

Type A

Type B

Type C

440

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 441 Tuesday, April 8, 2008 9:01 AM

Front

TACOMA_U_(L/O_0805)

5-2. Steps to take in an emergency

Slightly loosen the wheel nuts (one turn).

Position the jack at the correct jack point as shown.

Front Rear Make sure the jack is positioned on a level and solid place.

Raise the vehicle until the tire is slightly raised off the ground.

When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing.

Remove all the wheel nuts and the tire.

When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.

441

TACOMA_U.book Page 442 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Installing the tire

Remove any dirt or foreign mat- ter from the wheel contact sur- face.

If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.

Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.

Replacing a steel wheel with a steel wheel

Tapered portion

Tighten the nuts until the tapered portion comes into loose contact with the disc wheel sheet.

Disc wheel sheet

Replacing an aluminum wheel with a steel wheel

Tapered portion

Tighten the nuts until the tapered portion comes into loose contact with the disc wheel sheet.

Disc wheel sheet

442

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 443 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

Replacing an aluminum wheel with an aluminum wheel

Washer

Tighten the nuts until the washer of the nut comes into loose con- tact with the disc wheel.

Disc wheel

Lower the vehicle.

Firmly tighten each nut two or three times in the order shown in the illustration.

Tightening torque: 85 ft·lbf (113 N·m, 11.5 kgf·m)

2WD models except PreRunner

443

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 444 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

4WD models and PreRunner

Stowing the flat tire, jack and all tools

Lay down the tire with the outer side facing up, and install the holding bracket. Then secure the tire, taking care that the tire goes straight up without catching on any other part, to prevent it from flying for- ward during a collision or sudden braking. Keep winding until three clicks are heard. Stow the tools and jack securely.

n After completing the tire change

The tire pressure warning system must be reset. (→P. 374)

n When using the temporary spare tire

As the temporary spare tire is not equipped with the tire pressure warn- ing valve and transmitter, low inflation pressure of the spare tire will not be warned. Also, if you replace the temporary spare tire after the tire pressure warning light comes on, the light remains on.

444

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 445 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

CAUTION

n Using the jack

Improper use of the jack may lead to death or injuries due to the vehicle suddenly falling off the jack. l Do not use the jack for any purpose other than replacing tires or install-

ing and removing tire chains.

l Only use the jack that comes with this vehicle for replacing a flat tire.

Do not use it on other vehicles, and do not use other jacks for replac- ing tires on this vehicle.

l Always check that the jack is securely set to the jack point. l Do not put any part of your body under the vehicle supported by a jack. l Do not start or run the engine while your vehicle is supported by the

jack.

l Do not raise the vehicle while someone is in it. l When raising the vehicle, do not put an object on or under the jack. l Do not raise the vehicle to a height greater than that required to

replace the tire.

l Use a jack stand if it is necessary to get under the vehicle. Take particular care when lowering the vehicle to ensure that no one working on or near the vehicle will be injured.

n Using the jack handle

Tighten all the screws securely to prevent the extension parts from com- ing apart unexpectedly.

n Replacing a flat tire

Observe the following precautions to reduce the risk of death or serious injury. l Lower the spare tire completely to the ground before removing it from

under the vehicle.

l Do not try to remove the wheel ornament by hand. Take due care in

handling the ornament to avoid unexpected personal injury.

445

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 446 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

CAUTION

n Replacing a flat tire

l Never use oil or grease on the wheel bolts or wheel nuts.

The oil or grease can cause the wheel nuts to loosen, causing a seri- ous accident. Remove any oil or grease on the wheel bolts or wheel nuts.

l Have the wheel nuts tightened with a torque wrench to 85 ft·lbf (113

N·m, 11.5 kgf·m) as soon as possible after changing wheels. Failure to follow these precautions could cause the nuts to loosen and the wheels may fall off, which could lead to an accident causing death or serious injury.

l Do not attach a heavily damaged wheel ornament, as it may fly off the

wheel while the vehicle is moving.

n When using the temporary spare tire

l Remember that your temporary spare tire is specifically designed for use with your vehicle. Do not use your temporary spare tire on another vehicle.

l Do not use two temporary spare tires simultaneously. l Replace the temporary spare tire with a standard tire as soon as possi-

ble.

l Avoid sudden acceleration, deceleration and braking, as well as sharp

cornering.

n Speed limit when using the temporary spare tire

Do not drive at speeds in excess of 50 mph (80 km/h) when a temporary spare tire is installed on the vehicle. The temporary spare tire is not designed for driving at high speeds. Fail- ing to observe this precaution may lead to an accident causing death or serious injury.

n Driving with tire chains and the temporary spare tire

Do not fit tire chains to the temporary spare tire. Tire chains may damage the vehicle body and adversely affect driving performance.

446

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 447 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

CAUTION

n When the spare tire is attached

The vehicle speed may not be correctly detected, and the following sys- tems may not operate correctly: l ABS & Brake assist VSC l TRAC l Active traction control system (if equipped) l Hill-start assist control system (if equipped) l Downhill assist control system (if equipped) l AUTO LSD l Cruise control Also, not only can the following system not be utilized fully, it may actu- ally negatively effect the drive-train components: l 4WD system

447

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 448 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

NOTICE

n Do not drive the vehicle with a flat tire.

Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.

n When stowing the flat tire

Ensure that there is no object caught between the tire and the vehicle underbody.

n When replacing the tires

l When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled cor- rectly.

l Replace the grommets for the tire pressure warning valves and trans-

mitters as well.

n To avoid damaging the tire pressure warning valves and transmit-

ters Do not use liquid sealants on flat tires.

448

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 449 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If the engine will not start

If the engine still does not start after following the correct starting procedure (→P. 138) or releasing the steering lock (→P. 139), confirm the following points. n The engine will not start even when the starter motor oper-

ates normally. One of the following may be the cause of the problem. l There may not be sufficient fuel in the vehicle’s tank.

Refuel the vehicle.

l The engine may be flooded.

Try to restart the engine once more following correct starting procedures.

l There may be a malfunction in the engine immobilizer system.

(→P. 76)

n The starter motor turns over slowly, the interior lights and headlights are dim, or the horn does not sound or sounds at a low volume. One of the following may be the cause of the problem. l The battery may be discharged. (→P. 452) l The battery terminal connections may be loose or corroded.

n The starter motor does not turn over, the interior lights and

headlights do not turn on, or the horn does not sound. One of the following may be the cause of the problem. l One or both of the battery terminals may be disconnected. l The battery may be discharged. (→P. 452) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.

449

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 450 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If the shift lever cannot be shifted from P (if equipped)

If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.

Set the parking brake. Turn the engine switch to the ACC or ON position. Depress the brake pedal.

Pry the cover up with a flat- head screwdriver or equiva- lent.

Press the shift lock override button.

The shift lever can be shifted while the button is pressed.

450

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 451 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If you lose your keys

New genuine Toyota keys can be made by your Toyota dealer using the key number stamped on your key number plate. Vehicles with engine immobilizer system, the dealer will also need the master key. (→P. 30)

n If you lose all your master keys. (vehicles with engine immobilizer sys-

tem) You cannot make new keys; the whole engine immobilizer system must be replaced.

451

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 452 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If the vehicle battery is discharged

The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below.

Connect the jumper cables. 2.7 L 4-cylinder (2TR-FE) engine

452

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 453 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

4.0 L V6 (1GR-FE) engine

Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration.

Start the engine of the second vehicle. Increase the engine speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle. Maintain the engine speed of the second vehicle and start the vehicle’s engine. Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected.

Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.

453

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 454 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

n Starting the engine when the battery is discharged (vehicles with an

automatic transmission) The engine cannot be started by push-starting.

n Avoiding a discharged battery

l Turn off the headlights and the audio system while the engine is turned

off.

l Turn off any unnecessary electrical components when the vehicle is run- ning at a low speed for an extended period, such as in heavy traffic, etc.

CAUTION

n Avoiding battery fires or explosions

Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. l Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.

l Do not allow the jumper cables to come into contact with the “+” and “-” ter-

minals.

l Do not smoke, use matches, cigarette lighters or allow open flame near

the battery.

n Battery precautions

The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following pre- cautions when handling the battery. l When working with the battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body.

l Do not lean over the battery.

In the event that battery fluid comes into contact with the skin or eyes, immediately wash the affected area with water and seek medical attention. Place a wet sponge or cloth over the affected area until medical attention can be received.

454

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 455 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

CAUTION

n Battery precautions

l Always wash your hands after handling the battery support, terminals, and

other battery-related parts.

l Do not allow children near the battery.

NOTICE

n To prevent damaging the vehicle (vehicles with a manual transmission) Do not pull- or push-start the vehicle, because the three-way catalytic con- verter may overheat and become a fire hazard.

n When handling jumper cables

Be careful that the jumper cables do not become tangled in the cooling fan or any of the belts when connecting or disconnecting them.

455

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 456 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency If your vehicle overheats

If your engine overheats:

Stop the vehicle in a safe place and turn off the air condi- tioning system. Check to see if steam is coming out from under the hood. If you see steam:

Stop the engine. Carefully lift the hood after the steam subsides and then restart the engine.

If you do not see steam:

Leave the engine running and carefully lift the hood.

Check to see if the cooling fan is operating. If the fan is operating:

Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine.

If the fan is not operating:

Stop the engine immediately and call your local Toyota dealer.

456

TACOMA_U_(L/O_0805)

TACOMA_U.book Page 457 Tuesday, April 8, 2008 9:01 AM

5-2. Steps to take in an emergency

The engine has cooled down sufficiently. The engine coolant temperature gauge indicates C. Check the engine coolant level. Look for obvious coolant leaks from the radiator, hoses and under the vehicle. Note that water draining from the air conditioning is normal if it has been used.

Add engine coolant if required. Water can be used in an emer- gency is unavailable. (→P. 470)

if engine coolant

Have the vehicle checked at your nearest Toyota dealer as soon as possible.

457