2010 Toyota RAV4 Owners Manual

c. Select the desired phone name using

STEP 3

Press

or select “Record Name” using

, and say

a new name.

STEP 4

Select “Confirm” using a voice command or

Listing the registered cellular phones

Selecting “List Phones” using a voice command or

causes the

list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”.

while the name of a cellular phone is being read Pressing selects the cellular phone, and the following functions will be avail- able: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete”

286

3-3. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP 1

Select “Delete” using a voice command or

Pattern A

STEP 2

Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or

a. Press phone.

and say the name of the desired cellular

b. Press

and say “List phones”. While the name of the

desired cellular phone is being read aloud, press

Pattern B

STEP 2

Select the desired cellular phone to be deleted using

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

Pattern A

STEP 2

Press

, say a 4 to 8-digit number, and select “Confirm”

using a voice command or

287

3-3. Using the hands-free phone system (for cellular phone)

Pattern B

STEP 2

Select a 4 to 8-digit number using

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

once again.

■The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

288

3-3. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure

● Setting or changing the PIN (Personal Identification Number)

1. “Setup” → 2. “Security” → 3. “Set PIN”

● Locking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Lock”

● Unlocking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”

■ System setup items and operation procedure

● Setting voice guidance volume

1. “Setup” → 2. “System Setup” → 3. “Guidance Vol”

● Initialization

1. “Setup” → 2. “System Setup” → 3. “Initialize”

can only be used for system setup operation.

Setting or changing the PIN

■ Setting a PIN

STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter a PIN using a voice command or

When using

, input the code 1 digit at a time.

■ Changing the PIN

STEP 1

Select “Set PIN” using a voice command or

289

3-3. Using the hands-free phone system (for cellular phone)

STEP 2

Enter the registered PIN using a voice command or

STEP 3

Enter a new PIN using a voice command or

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP 1

Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock

(Phbk Unlock)” using a voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” using a voice command or

a. Press

and say the registered PIN.

b. Input a registered PIN using

Setting voice guidance volume

STEP 1

Select “Guidance Vol” using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

290

3-3. Using the hands-free phone system (for cellular phone)

Initialization

STEP 1

Select “Initialize” and then “Confirm” using

STEP 2

Select “Confirm” using

■Initialization

●The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

●Once the initialization has been completed, the data cannot be restored

to its original state.

■When the phone book is locked

The following functions cannot be used: ●Dialing by inputting a name ●Speed dialing ●Dialing a number stored in the call history memory ●Using the phone book

291

3-3. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

● Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

● Setting speed dial

1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”

● Changing a registered name

1. “Phonebook” → 2. “Change Name”

● Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

● Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial (Del Spd Dial)”

● Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: ● Inputting a phone number using a voice command ● Transferring data from the cellular phone

● Inputting a phone number using

● Selecting a phone number from outgoing or incoming call history

292

3-3. Using the hands-free phone system (for cellular phone)

■ Adding procedure

STEP 1

Select “Add Entry” using a voice command or

STEP 2

Use one of the following methods to input a phone number:

Inputting a phone number using a voice command

STEP2-1:Select “By Voice” using a voice command or

STEP2-2:Press

, say the desired number, and select

“Confirm” using a voice command.

Transferring data from the cellular phone

STEP2-1:Select “By Phone” and then “Confirm” using a voice

command or

STEP2-2:Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3:Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” using a voice command.

b. Select the desired data using

293

3-3. Using the hands-free phone system (for cellular phone)

Inputting a phone number using

STEP2-1:Select “Manual Input” using

STEP2-2:Input a phone number using

Input the phone number 1 digit at a time.

STEP2-3:When the entire number has been input, press

once again.

Selecting a phone number from outgoing or incoming call history

STEP2-1:Select “Call History” using a voice command or

STEP2-2:Select “Outgoing” or “Incoming” using a voice com-

mand or

STEP2-3:Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” using a voice command.

b. Select the desired data using

294

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or

a. Press

and say the desired name.

b. Select “Record Name” using

, and say the desired

name.

STEP 4

Select “Confirm” using a voice command or

STEP 3

In firm” registers the newly added phone number as a speed dial.

, selecting “Set Speed Dial (Speed Dial)” instead of “Con-

Setting speed dials

STEP 1

Select “Set Speed Dial (Speed Dial)” using a voice command

or

STEP 2

Select the data to be registered as a speed dial by one of the following methods:

a. Press

, say desired name, and select “Confirm”

using a voice command or

295

3-3. Using the hands-free phone system (for cellular phone)

b. Press

, and say “List names”. While the desired

name is being read aloud, press

, and select “Con-

firm” using a voice command or

c. Select the desired data using

STEP 3

Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” using

a voice command or

b. Press and hold the desired preset button.

Changing a registered name

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name to be changed by one of the following meth- ods.

a. Press

, say desired name, and select “Confirm”

using a voice command or

296

3-3. Using the hands-free phone system (for cellular phone)

b. Press

, and say “List names”. While the desired

name is being read aloud, press

, and select “Con-

firm” using a voice command or

c. Select the desired name using

STEP 3

Press

or select “Record Name” using

, and say

a new name.

STEP 4

Select “Confirm” using a voice command or

Deleting registered data

STEP 1

Select “Delete Entry” using a voice command or

Pattern A

STEP 2

Select the data to be deleted by either of the following meth-

ods, and select “Confirm” using a voice command or

a. Press

, and say the name of the desired phone

number to be deleted.

297

3-3. Using the hands-free phone system (for cellular phone)

b. Press

, say “List phones”. While the name of the

desired phone number is being read aloud, press

Pattern B

STEP 2

Select the data to be deleted using

Deleting speed dials

STEP 1

Select “Delete Speed Dial (Del Spd Dial)” using a voice com-

mand or

STEP 2

Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” using a voice command or

Listing the registered data

Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”.

while the desired data is being read aloud selects

Pressing the data, and the following function will be available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Set Speed Dial (Speed Dial)”

298

3-3. Using the hands-free phone system (for cellular phone)

■Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

299

3-4. Using the interior lights Interior lights list

Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration (except the luggage com- partment light) automatically turn on/off according to the presence of the electronic key (vehicles with smart key system), whether the doors are locked/unlocked, whether the doors are opened/closed, and the “ENGINE START STOP” switch mode or the engine switch position. The luggage compartment light turns on/off according to whether the back door is opened/closed.

Interior light (→P. 302) Personal/interior lights (→P. 301) Engine switch light Foot lights (if equipped) Luggage compartment light (turns on/off according to whether the back door is opened/closed)

300

Personal/interior light main switch and personal/interior lights

3-4. Using the interior lights

Personal/interior light main switch

Type A

Door position The personal lights and interior light come on when a door is opened. They go off when the doors are closed. Off The personal lights and interior light can be individually turned on or off.

Type B

Personal/interior lights

Type A

On/off

301

3-4. Using the interior lights

Personal/interior lights and interior light and luggage compartment light

Type B

On/off

Interior light

Luggage compartment light

Door position Off On

On Off

302

3-4. Using the interior lights

Luggage compartment light

■To prevent battery discharge (excluding luggage compartment light)

If the lights remain on when a door is not fully closed and the personal/inte- rior light main switch is in door position, the lights will go off automatically after 20 minutes.

■Customization that can be configured at Toyota dealer

Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features →P. 488)

303

3-5. Using the storage features List of storage features

Cup holders Bottle holders Auxiliary box Glove box Overhead console Console box

304

Glove box

3-5. Using the storage features

Glove box

Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Lock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Open (pull lever)

CAUTION

■Caution while driving

Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.

305

3-5. Using the storage features

Console box

Upper tray

Lift the lid.

Console box

Lower box

Pull the lever up and lift the lid.

CAUTION

■Caution while driving

Keep the console box closed. Injuries may result in the event of an accident or sudden braking.

306

3-5. Using the storage features

Overhead console

Overhead console

The overhead console is useful for temporarily storing sunglasses and similar small items.

Press in the lid.

CAUTION

■Items that should not be left in the overhead console

Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.

■Caution while driving

Keep the overhead console closed. Injuries may result in the event of an accident or sudden braking.

■Items unsuitable for storing

Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the overhead console to open and the items inside may fall out, resulting in an accident.

307

3-5. Using the storage features

Cup holders

Type A

Cup holders

Removing the adapters changes the size. (→P. 308)

Type B

To use the cup holders, pull the strap forward and fold down the center seatback.

■Adjusting size of the cup holders (type A only)

Remove the adapters.

308

3-5. Using the storage features

Cup holders and bottle holders

CAUTION

■Items unsuitable for the cup holder

Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.

Bottle holders

Front seat

Second seat

309

3-5. Using the storage features

Third seat

Bottle holders

CAUTION

■Items unsuitable for the bottle holder

Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.

NOTICE

■Items that should not be stowed in the bottle holders

Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.

310

Auxiliary box

3-5. Using the storage features

Auxiliary box

To open and close the auxiliary box, press the button.

CAUTION

■Caution while driving

Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking.

NOTICE

■Operating the auxiliary box

If it is difficult to open or close the auxiliary box on a steep hill, move the vehicle to a level place. To avoid damage to the auxiliary box, do not apply excessive force to operate it.

311

3-6. Other interior features Sun visors

Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards.

312

3-6. Other interior features Vanity mirrors

Slide the cover.

The light turns on when the cover is opened.

313

3-6. Other interior features Clock

Vehicles with a manual air conditioning system

to

Adjusts the hours. Adjusts the minutes. Rounds hour.* *: e.g. 1:00 to 1:29 → 1:00
1:30 to 1:59 → 2:00

the nearest

Vehicles with an automatic air conditioning system

to

Adjusts the hours. Adjusts the minutes. Rounds hour.* *: e.g. 1:00 to 1:29 → 1:00
1:30 to 1:59 → 2:00

the nearest

■The clock is displayed when

Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

Vehicles with smart key system

The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.

■When disconnecting and reconnecting battery terminals

The time display will automatically be set to 1:00.

314

3-6. Other interior features Power outlets

The power outlet can be used for a following component.

12 V: Accessories that run on less than 10 A. 120 VAC: Accessories that use less than 100 W.

■ 12 V

Type A

Type B

Type C

315

3-6. Other interior features

■ 120 VAC (if equipped)

Main switch To use the power outlet, turn on the main switch. Power outlet socket

■The power outlet can be used when

12V

●Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

●Vehicles with smart key system

The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. 120 VAC

●Vehicles without smart key system

The engine switch is in the “ON” position.

●Vehicles with smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

316

3-6. Other interior features

NOTICE

■To avoid damaging the power outlet

Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.

■To prevent the fuse from being blown

12V Do not use an accessory that uses more than 12 V 10 A. 120 VAC Do not use a 120 VAC appliance that requires more than 100 W. If a 120 VAC appliance that consumes more than 100 W is used, the pro- tection circuit will cut the power supply.

■To prevent battery discharge

Do not use the power outlet longer than necessary when the engine is not running.

■Appliances that may not operate properly (120 VAC)

The following 120 VAC appliances may not operate properly even if their power consumption is under 100 W. ●Appliances with high initial peak wattage ●Measuring devices that process precise data ●Other appliances that require an extremely stable power supply

317

3-6. Other interior features Seat heaters∗

Heats the driver’s seat Heats the front passenger’s seat The indicator light is on while the seat heater is operating. Push the switch once again to turn off the seat heater.

■The seat heaters can be used when Vehicles without smart key system

The engine switch is in the “ON” position.

Vehicles with smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

CAUTION

■Burns

●Use caution when seating the following persons in a seat with the seat

heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping

drugs, cold remedies, etc.)

●Do not cover the seat with anything when using the seat heater.

Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.

318

∗: If equipped

3-6. Other interior features

NOTICE

■To prevent seat heater damage

Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.

■To prevent battery discharge

Turn the switches off when the engine is not running.

319

3-6. Other interior features Armrest

To use the armrest, pull the strap forward and fold down the center seatback.

NOTICE

■To prevent damage to the armrest

Do not place too much strain on the armrest.

320

3-6. Other interior features Coat hooks

CAUTION

■Items that must not be hung on the hook (vehicles with SRS curtain

shield airbags) Do not hang a coat hanger or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles that cause death or serious injury.

NOTICE

■To prevent damage to the coat hook

Do not place too much load on the coat hook.

321

3-6. Other interior features Floor mat

Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.

Fix the floor mat in place using the retaining hooks (clips) pro- vided.

For details, refer to the floor mat retention clip installation instructions supplied with the clips.

CAUTION

Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. ■When installing the driver's floor mat

●Do not use floor mats designed for other models or different model year

vehicles, even if they are Toyota Genuine floor mats.

●Only use floor mats designed for the driver's seat. ●Always install the floor mat securely using the retaining hooks (clips) pro-

vided.

●Do not use two or more floor mats on top of each other. ●Do not place the floor mat bottom-side up or upside-down.

■Before driving

●Check that the floor mat is securely fixed in the right place with all the pro- vided retaining hooks (clips). Be espe- cially careful to perform this check after cleaning the floor.

●With the engine stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not inter- fere with the floor mat.

322

3-6. Other interior features Luggage compartment features

■ Cargo hooks

Cargo hooks are provided for securing loose items.

■ Grocery bag hooks

■ Storage box (vehicles without third seats)

Type A

The rear deck board can be folded up into two positions.

STEP 1

Lift the rear deck board.

323

3-6. Other interior features

STEP 2

Type B

Fold up the deck board. The lid can be removed.

Lift the front deck board.

324

■ Luggage cover (if equipped)

STEP 1

3-6. Other interior features

Attach the hooks to the head restraints.

If necessary, move the second seats the hook engagement.

to enable

STEP 2

Pull out the luggage cover and hook onto the anchors.

Removing the luggage cover (if equipped)

The luggage cover can be removed by following the procedure below.

STEP 1

Detach the hooks of the luggage cover.

STEP 2

Compress the end of the lug- gage cover and lift the luggage cover up.

325

3-6. Other interior features

Stowing the luggage cover (if equipped)

STEP 1

Open the rear deck board and remove the deck side cover.

Insert the right end of the lug- gage cover into the recess, then compress the left end of the lug- gage cover and insert it into the recess.

STEP 2

326

3-6. Other interior features

CAUTION

■When the cargo hooks are not in use

To avoid injury, always return the cargo hooks to their stowed positions.

■Caution while driving

●Do not drive with any of the deck boards opened. Items may fall out and

cause injury.

●Do not place anything on the luggage cover to avoid death or serious

injury.

■When installing/stowing the luggage cover

Make sure that the luggage cover is securely installed/stowed. Failure to do so may result in serious injury in the event of sudden braking or a collision.

NOTICE

■To prevent damage to the grocery bag hooks

Do not hang heavy loads on the hooks.

327

3-6. Other interior features

328

4-1. Maintenance and care Cleaning and protecting the vehicle exterior

Perform the following to protect the vehicle and maintain it in prime condition.

● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. Wash the vehicle body using a sponge or soft cloth, such as a chamois.

● For hard-to-remove marks, use car wash soap and rinse thor-

oughly with water.

● Wipe away any water. ● Wax the vehicle when the waterproof coating deteriorates. If water does not bead on a clean surface, apply wax when the vehicle body is cool.

■Automatic car washes

●Before washing the vehicle, do the following.

• Fold the mirrors back. • Remove the antenna.

●Brushes used in automatic car washes may scratch the vehicle surface

and harm your vehicle’s paint.

■High pressure car washes

●Do not allow the nozzles of the car wash to come within close proximity

of the windows.

●Before car wash, check that the fuel filler door on your vehicle is closed

properly.

330

4-1. Maintenance and care

■Aluminum wheels

●Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint.

●Do not use detergent on the wheels when they are hot, for example after

driving for long distance in the hot weather.

●Wash detergent from the wheels immediately after use.

■Bumpers

Do not scrub with abrasive cleaners.

CAUTION

■Caution about the exhaust pipe

Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.

331

4-1. Maintenance and care

NOTICE

■To prevent paint deterioration and corrosion on the body and compo-

nents (aluminum wheels etc.) ●Wash the vehicle immediately in the following cases:

• After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface • If you see dead insects or insect droppings on the paint • After driving in an area contaminated with soot, oily smoke, mine dust,

iron powder or chemical substances

• If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface

●If the paint is chipped or scratched, have it repaired immediately. ●To prevent the wheels from corroding, remove any dirt and store in a place

with low humidity when storing the wheels.

■Cleaning the exterior lights

●Wash carefully. Do not use organic substances or scrub with a hard brush.

This may damage the surfaces of the lights.

●Do not apply wax on the surfaces of the lights.

Wax may cause damage to the lenses.

■Antenna installation and removal precautions

●Before driving, ensure that the antenna is installed. ●When the antenna is removed, such as before entering an automatic car wash, make sure to store it in a suitable place so as not to lose it. Also, before driving, make sure to reinstall the antenna in its original position.

■To prevent damage to the windshield wiper arms

When lifting the wiper arms away from the windshield, pull the driver side wiper arm upward first, and repeat for the passenger side. When returning the wipers to their original position, do so from the passenger side first.

332

4-1. Maintenance and care Cleaning and protecting the vehicle interior

The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior

Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.

■ Cleaning the leather areas

● Remove dirt and dust using a vacuum cleaner. ● Wipe any excess dirt and dust with a soft cloth dampened with

diluted detergent. Use a diluted water solution of approximately 5% neutral wool deter- gent.

● Wring out any excess water from the cloth and thoroughly

wipe off all remaining traces of detergent.

● Wipe the surface with a dry, soft cloth to remove any remain- ing moisture. Allow the leather to dry in a shaded ventilated area.

■ Synthetic leather areas

● Remove loose dirt using a vacuum cleaner. ● Apply a mild soap solution to the synthetic leather. ● Allow the solution to soak in for a few minutes. Remove the

dirt and wipe off the solution with a clean, damp cloth.

333

4-1. Maintenance and care

■Caring for leather areas

Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior.

■Shampooing the carpets

There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. Excellent results are obtained by keeping the carpet as dry as possi- ble.

■Seat belts

Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts.

CAUTION

■Water in the vehicle

●Do not splash or spill liquid in the vehicle. Doing so may cause electrical

components etc. to malfunction or catch fire.

●Do not get any of the SRS components or wiring in the vehicle interior wet.

(→P. 98) Electrical malfunction may cause the airbags to deploy or not function properly, resulting in death or severe injury.

■Cleaning the interior (especially instrument panel)

Do not use polish wax or polish cleaner. The instrument panel may reflect off the windshield, obstructing the driver's view and leading to an accident, resulting in death or serious injury.

334

4-1. Maintenance and care

NOTICE

■Cleaning detergents

●Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces.

●Do not use polish wax or polish cleaner. The instrument panel's or other

interior part’s painted surface may be damaged.

■Preventing damage to leather surfaces

Observe the following precautions to avoid damage to and deterioration of leather surfaces. ●Remove any dust or dirt on leather surfaces immediately. ●Do not expose the vehicle to direct sunlight for extended periods of time.

Park the vehicle in the shade, especially during summer.

●Do not place items made of vinyl, plastic, or that contain wax on the uphol- stery, as they may stick to the leather surface if the vehicle interior heats up significantly.

■Water on the floor

Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components under the floor of the vehicle, and may also cause the body to rust.

■Cleaning the inside of the rear window

●Do not use glass cleaner to clean the rear window, as this may cause damage to the rear window defogger heater wires. Use a cloth dampened with lukewarm water to gently wipe the windows clean. Wipe the windows in strokes running parallel to the heater wires.

●Be careful not to scratch or damage the heater wires.

335

4-2. Maintenance Maintenance requirements

To ensure safe and economical driving, day-to-day care and regular maintenance is essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance. ■ General maintenance

General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer.

■ Scheduled maintenance

Scheduled maintenance should be performed at specified inter- vals according to the maintenance schedule. For details about maintenance items and schedules, refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.

■ Do-it-yourself maintenance

You can perform some maintenance procedures yourself. Please be aware that do-it-yourself maintenance may affect war- ranty coverage. The use of Toyota Repair Manuals is recommended. For details about warranty coverage, see the separate “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement”.

■Repair and replacement

It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.

336

4-2. Maintenance

■Allow inspection and repairs to be performed by a Toyota dealer

●Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.

●Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.

CAUTION

■Warning in handling of battery

●Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.

●Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of Califor- nia to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.

●Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling. (→P. 360)

337

4-2. Maintenance General maintenance

Listed below are the general maintenance items that should be per- formed at the intervals specified in the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice.

Engine compartment

Items

Check points

Battery Brake fluid Engine coolant Engine oil Exhaust system

Radiator/condenser/hoses

Washer fluid

(→P. 360) Maintenance-free. (→P. 358) At the correct level? At the correct level? (→P. 357) At the correct level? (→P. 353) No fumes or strange sounds? Not blocked with foreign matter? (→P. 358) At the correct level? (→P. 364)

338

4-2. Maintenance

Vehicle interior

Items

Check points

Accelerator pedal

Automatic transmission “Park” mechanism

Brake pedal

Brakes

Head restraints

Indicators/buzzers

Lights

Parking brake

Seat belts

Seats

Steering wheel

• Moves smoothly (without uneven pedal effort or catching)? • Can the vehicle be held securely on an incline with the shift lever in P? • Moves smoothly? • Does it have appropriate clear- ance and correct amount of free play? • Not pull to one side when applied? • Loss of brake effectiveness? • Spongy feeling brake pedal? • Pedal almost touches floor? • Move smoothly and lock securely? • Function properly? • Do all the lights come on? • Headlights aimed correctly? • Moves smoothly? • Can hold the vehicle securely on an incline? • Does the seat belt system oper- ate smoothly? • Are the belts undamaged? • Do the seat controls operate properly? • Moves smoothly? • Has correct free play? • No strange noises?

339

4-2. Maintenance

Vehicle exterior

Doors Engine hood

Fluid leaks

Tires

Items

Check points

• Operate smoothly? • The lock system works properly? • Is there any leakage after park- ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? • Tires rotated according to the maintenance schedule? • Wheel nuts are not loose?

CAUTION

■If the engine is running

Turn the engine off and ensure that there is adequate ventilation before per- forming maintenance checks.

340

4-2. Maintenance Emission inspection and maintenance (I/M) programs

Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system moni- tors the operation of the emission control system. ■ If the malfunction indicator lamp comes on

The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.

■ Your vehicle may not pass the I/M test:

● When the battery is disconnected or discharged

Readiness codes that are set during ordinary driving are erased. Also, depending on your driving habits, the readiness codes may not be completely set.

● When the fuel tank cap is loose

The malfunction indicator lamp comes on as a temporary mal- function and your vehicle may not pass the I/M test.

■ When the malfunction indicator lamp goes off after several

driving trips The error code in the OBD system will not be cleared unless the vehicle is driven 40 or more times.

■ If your vehicle does not pass the I/M test

Contact your Toyota dealer to prepare the vehicle for re-testing.