2010 Toyota RAV4 Owners Manual

The XM® antenna is not connected. Check whether the XM® antenna cable is attached securely. There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. You have not subscribed to the XM® Satellite Radio. The radio is being updated with the latest encryption code. Contact the XM® Satellite Radio for subscription information. When a contract is canceled, you can choose the “CH000” and all free-to-air channels. The premium channel you selected is not autho- rized. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. If you want to listen to the premium chan- nel, contact the XM® Satellite Radio. The XM® signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program information. Wait until the unit has received the information. The channel you selected is not broadcasting any programming. Select another channel. There is no song/program title or artist name/fea- ture associated with the channel at that time. No action is needed.

243

3-2. Using the audio system

“---”

The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel.

Contact the XM® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada).

■Certifications for the radio tuner

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by trying one or more of the following: ●Reorienting or relocating the receiving antenna. ●Increasing the separation between the equipment and receiver. ●Connecting the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consulting the dealer or an experienced radio/TV technician for help.

NOTICE

■To prevent damage, remove the antenna in the following cases.

●The antenna will touch the ceiling of a garage. ●A cover will be put on the vehicle.

244

3-2. Using the audio system Using the CD player

Power Volume

CD slot

Playback

CD insert (type B and C)

Displaying text messages

Fast-forward

Reverse

CD selection (with a CD changer)

CD eject

Track selection Search playback

Random playback

Repeat play

Loading CDs

■ Loading a CD

Type A Insert a CD. Type B and C

STEP 1

STEP 2

Press “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”.

245

3-2. Using the audio system

■ Loading multiple CDs (type B and C)

STEP 1

STEP 2

STEP 3

until you hear a beep.

Press and hold “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”. The indicator on the slot turns to amber when the CD is inserted. Insert the next CD when the indicator on the slot turns from amber to green again. Repeat the procedure for the remaining CDs. To stop the operation, press

Ejecting CDs

■ Ejecting a CD

Type A Press Type B and C

and remove the CD.

STEP 1

STEP 2

(∨) or To select the CD to be ejected, press The number of the CD selected is shown on the display. Press

and remove the CD.

(∧).

■ Ejecting all the CDs (type B and C)

Press and hold the CDs.

Selecting a track

until you hear a beep, and then remove

Press “∧” to move up or “∨” to move down using

until the

desired track number is displayed.

246

3-2. Using the audio system

Fast-forwarding and reversing tracks

To fast-forward or reverse, press ward).

(reverse) or

(fast-for-

Scanning tracks

STEP 1

STEP 2

Press The first ten seconds of each track will be played. Press

again when the desired track is reached.

Selecting a CD (with a CD changer)

■ To select a CD to play

To select the desired CD, press

(∨) or

(∧).

STEP 1

■ To scan loaded CDs Press and hold The first 10 seconds of the first track on each CD will be played. Press

again when the desired CD is reached.

until you hear a beep.

STEP 2

Repeat play

■ To repeat a track

Press

(RPT).

■ To repeat all of the tracks on a CD (with a CD changer)

Press and hold

(RPT) until you hear a beep.

247

3-2. Using the audio system

Random playback

■ Current CD

Press Tracks are played in a random order until

(RAND).

■ All CDs (with a CD changer)

is pressed once more.

Press and hold Tracks on all loaded CDs are played in a random order until pressed once more.

(RAND) until you hear a beep.

is

Switching the display

Press

Each time no./Elapsed time→CD title→Track name.

is pressed, the display changes in the order of Track

■Display

Up to 12 characters can be displayed at a time. If there are 13 characters or more, pressing and holding second or more will display the remaining characters. A maximum of 24 characters can be displayed. If for 6 seconds or more, the display will return to the first 12 characters. Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all.

is pressed for 1 second or more again or has not been pressed

for 1

248

3-2. Using the audio system

■Canceling random, repeat and scan playback

Press

(RAND),

(RPT) or

again.

■Error messages

“ERROR”:

“WAIT”:

This indicates a problem either with the CD or inside the player. The CD may be dirty, damaged or inserted upside down. Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back.

■Discs that can be used

Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration.

CDs with copy-protect features may not be used.

■CD player protection feature

To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used.

■If CDs are left inside the CD player or in the ejected position for

extended periods CDs may be damaged and may not play properly.

■Lens cleaners

Do not use lens cleaners. Doing so may damage the CD player.

249

3-2. Using the audio system

NOTICE

■CDs that cannot be used

Do not use the following types of CDs or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function.

●Type A: CDs that have a diameter other

than 4.7 in. (12 cm) or 3 in. (8 cm)

●Type B and C: CDs that have a diame-

ter that is not 4.7 in. (12 cm)

●Low-quality and deformed CDs

●CDs with a transparent or translucent

recording area

●CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off

250

3-2. Using the audio system

NOTICE

■CD player precautions

Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ●Do not insert anything other than CDs into the CD slot. ●Do not apply oil to the CD player. ●Store CDs away from direct sunlight. ●Never try to disassemble any part of the CD player.

●Do not insert more than one CD at a

time.

251

3-2. Using the audio system Playing back MP3 and WMA discs

Power Volume

CD slot

Fast-forward

CD insert (type B and C)

CD eject

File selection

Search playback

File selection

Folder selection

Displaying text messages

Random playback Repeat play

Playback

Reverse CD selection (with a CD changer)

Loading and ejecting MP3 and WMA discs

→P. 245

Selecting an MP3 and WMA disc (with a CD changer)

→P. 247

252

3-2. Using the audio system

Selecting and scanning a folder

■ Selecting folders one at a time

Press “∧” or “∨” on

to select the desired folder.

■ Selecting the desired folder by cueing the first file of each

folder Press and hold folder is reached, press

until you hear a beep. When the desired

once again.

■ Returning to the first folder

Press and hold “∨” on

until you hear a beep.

Selecting and scanning files

■ Selecting one file at a time

Turn

or press “∧” or “∨” on

to select the desired file.

■ Selecting the desired file by cueing the files in the folder

Press When the desired file is reached, press

once again.

Fast-forwarding and reversing files

To fast-forward or reverse, press ward).

(reverse) or

(fast-for-

253

3-2. Using the audio system

Repeat play

■ To repeat a file

Press

(RPT).

■ To repeat all of the files in a folder

Press and hold

(RPT) until you hear a beep.

Random playback

■ To play files from a particular folder in random order

Press

(RAND).

■ To play all of the files on a disc in random order

Press and hold

(RAND) until you hear a beep.

Switching the display

Press

Each time is pressed, the display changes in the order of Folder no./File no./Elapsed time→Folder name→File name→Album title (MP3 only)→Track title→Artist name.

254

3-2. Using the audio system

■Display →P. 248

■Canceling random, repeat and scan playback

→P. 249

■Error messages

“ERROR”:

“WAIT”:

This indicates a trouble either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down. Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back.

“NO MUSIC”: This indicates that the MP3/WMA file is not included in the

CD.

■Discs that can be used

→P. 249

■CD player protection feature

→P. 249

■If CDs are left inside the CD player or in the ejected position for

extended periods →P. 249

■Lens cleaners

→P. 249

255

3-2. Using the audio system

■MP3 and WMA files

MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded. ●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz) • Compatible bit rates (compatible with VBR)

MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates (only compatible with 2-channel playback)

Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)

●Compatible media

Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible if the CD-R or CD-RW is not finalized. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.

256

3-2. Using the audio system

●Compatible disc formats

The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2

CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels • Maximum length of folder names/file names: 32 characters • Maximum number of folders: 192 (including the root) • Maximum number of files per disc: 255

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●Multi-sessions

As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3 and WMA playback

When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnec- essary folders. If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.

257

3-2. Using the audio system

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 file with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• CD-R or CD-RW playback may not be possible in some instances,

depending on the characteristics of the disc.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S. and other countries.

NOTICE

■CDs that cannot be used

→P. 250

■CD player precautions

→P. 251

258

3-2. Using the audio system Optimal use of the audio system

Displays the current mode Changes the following set- ting ● Sound quality and vol-

ume balance (→P. 260) The sound quality and bal- be ance changed the best sound.

can to produce

setting

● Volume and tone quality level (Automatic Sound Levelizer) (→P. 261)

259

3-2. Using the audio system

Using the audio control function

■ Changing sound quality modes

Pressing

selects the mode to be changed in the following

order. “BAS”→“MID”*→“TRE”→“FAD”→“BAL”→“ASL”

*: Type C only

■ Adjusting sound quality

Turning

adjusts the level.

Mode displayed “BAS”*

“MID”*

“TRE”*

“FAD”

“BAL”

Sound qual-

ity mode

Bass

Mid-range (type C only)

Treble

Front/rear volume balance Left/right volume balance

Turn to the

left

Turn to the

right

Low

High

Level

-5 to 5

-5 to 5

-5 to 5

R7 to F7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each radio mode or

CD mode.

260

3-2. Using the audio system

■ Adjusting the Automatic Sound Levelizer (ASL)

Type A and B

When “ASL” is selected, turning

to the right changes the

“ASL” level in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed. Type C

When “ASL” is selected, turning

to the right turns “ASL” on,

and turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to the noise level as you drive your vehicle.

■Trademark owned by SRS Labs, Inc. (type A)

The audio systems utilize SRS FOCUS® and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.

FOCUS, TruBass, SRS and Inc. FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.

symbols are trademarks of SRS Labs,

261

3-2. Using the audio system Using the AUX adapter

This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers.

STEP 1

Open the cover and connect the portable audio device.

STEP 2

Press

■Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself.

■When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

262

3-2. Using the audio system Using the steering wheel audio switches∗

Some audio features can be controlled using the switches on the steering wheel.

Volume Radio: Selects radio sta- tions CD: Selects (MP3 and WMA) and discs Turns the power on, selects audio source

tracks,

files

Turning on the power

Press

when the audio system is turned off. The audio system can be turned off by holding beep.

down until you hear a

Changing the audio source

when the audio system is turned on. The audio source

Press changes as follows each time Type A:

is pressed.

FM1→FM2→CD→AUX→AM→SAT1→SAT2→SAT3

Type B and C:

FM1→FM2→CD changer→AUX→AM→SAT1→SAT2→SAT3

∗: If equipped 263

3-2. Using the audio system

Adjusting the volume

Press “+” on

to increase the volume and “-” to decrease the vol-

ume.

Press and hold

to continue increasing or decreasing the volume.

Selecting a radio station

STEP 1

Press

to select the radio mode.

STEP 2

Press “∧” or “∨” on

to select a preset station.

To scan for receivable stations, press and hold beep.

until you hear a

Selecting a track/file

STEP 1

Press

to select the CD mode.

STEP 2

Press “∧” or “∨” on

to select the desired track/file.

Selecting a folder (type A)

STEP 1

Press

to select the CD mode.

STEP 2

Press and hold “∧” or “∨” on

until you hear a beep.

Selecting a disc in the CD player (with a CD changer)

STEP 1

Press

to select the CD mode.

STEP 2

Press and hold “∧” or “∨” on

until you hear a beep.

264

3-2. Using the audio system

CAUTION

■To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

265

3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗

This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.

Title

Using the hands-free phone system (for cellular phone) Making a phone call Setting a cellular phone Security and system setup Using the phone book

Page

P. 270

P. 278
P. 284
P. 289
P. 292

■Conditions affecting operation

The hands-free phone system may not operate normally in the following situ- ations: ●The cellular phone is turned off, or located outside the service area. ●The cellular phone has a low battery. ●The cellular phone is not connected to the system. ●The cellular phone is behind the seat or in the glove box, or metal mate-

rial covers or touches the phone.

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed.

266

∗: If equipped

3-3. Using the hands-free phone system (for cellular phone)

■Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1
If your cellular phone does not support HFP, the Bluetooth® phone cannot be entered and OPP serviced cannot be provided separately.

■Trademark owned by Bluetooth SIG. Inc.

■Certification for the hands-free phone system

FCC ID: ACJ932C5ZZZ035 IC ID: 216J-C5ZZZ035 MADE IN JAPAN/MEXICO NOTE: This device complies with Part 15 of the FCC Rules and RSS-210. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

267

3-3. Using the hands-free phone system (for cellular phone)

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio fre- quency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

268

3-3. Using the hands-free phone system (for cellular phone)

CAUTION

■Caution while driving

Do not use a cellular phone or connect the Bluetooth® phone.

NOTICE

■To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.

269

3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)∗

■ Audio unit

Displays such messages, phone number

items as and

name,

Lower-case characters and special characters, such as an umlaut, cannot be dis- played.

Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Press and hold: Displays information that is too long to be displayed at one time on the screen Selects speed dials Displays the reception level Displays Bluetooth® con- nection condition

If “BT” is not displayed, the hands-free phone system cannot be used.

270

∗: If equipped

3-3. Using the hands-free phone system (for cellular phone)

■ Steering wheel telephone switches

Volume

The voice guidance volume cannot be adjusted using this button.

Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys- tem on Press and hold: Voice com- mand system off

■ Microphone

271

3-3. Using the hands-free phone system (for cellular phone)

Operating the system using a voice command

By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands-

free phone system without checking the display or operating

■ Operation procedure when using a voice command

and say a command for a desired function.

Press (→P. 274)

■ Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the system using a voice command: Cancel: Exits the hands-free phone system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function

272

3-3. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone:

STEP 1

Press

or

The introductory guidance and phone name registration instructions are heard.

STEP 2

Register a phone name by either of the following methods.

a. Select “Record Name” using

, and say a name to be

registered.

b. Press

and say a name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 3

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard.

STEP 4

Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

Guidance for registration completion is heard.

273

3-3. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

■ Normal operation

First menu

Second menu

Third menu

Operation detail

Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory

Dialing by inputting a number

Dialing by inputting a name registered in the phone book Adding a new number Changing a name in the phone book

Deleting the phone book data

Deleting a registered speed dial

Listing the phone book data

Registering a speed dial

Add Entry Change Name Delete Entry Delete Speed Dial (Del Spd Dial) List Names Set Speed Dial (Speed Dial)

Callback

Redial

Dial by number Dial by name

Phonebook

274

3-3. Using the hands-free phone system (for cellular phone)

First menu

Second menu

Third menu

Operation detail

Security

Setup

Phone Setup

System Setup

Set PIN Phonebook Lock Phonebook Unlock

Pair Phone

Change Name

Delete

List Phones

Select Phone

Set Passkey Guidance Vol- ume (Guidance Vol) Initialize

Setting a PIN code

Locking the phone book

Unlocking the phone book

Registering the cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey

Setting voice guidance vol- ume

Initialization

275

3-3. Using the hands-free phone system (for cellular phone)

■ Using a short cut key

First menu

Second menu

Operation detail

Dial “XXX (name)”

Phone book add entry

Phone book change name

Phone book delete entry Phone book list names Phone book set speed dial Phone book delete speed dial

Phonebook

Dialing a number registered in the phone book

Adding a new number

Changing the name of a phone number in the phone book

Deleting phone book data

Listing the phone book data

Registering a speed dial

Deleting a speed dial

Phonebook Unlock Phonebook Lock

Unlocking the phone book Locking the phone book

276

3-3. Using the hands-free phone system (for cellular phone)

■Automatic adjustment of volume

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

■When using a voice command

●For numbers, say a combination of single digits from zero to nine, #

(pound), ∗ (star), and + (plus).

●Say a command correctly and clearly.

■The system may not recognize your voice in the following situations:

●When driving on a rough road ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

■The following cannot be performed while driving:

●Operating the system with

●Registering a cellular phone to the system

■Changing the passkey

→P. 287

277

3-3. Using the hands-free phone system (for cellular phone) Making a phone call

■ Making a phone call

● Dialing by inputting a number

“Dial by number”

● Dialing by inputting a name

“Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory

“Redial”

● Dialing a number stored in the incoming history memory

“Call back”

■ Receiving a phone call ● Answering the phone ● Refusing the call ■ Transferring a call ■ Using the call history memory

● Dialing ● Storing data in the phone book ● Deleting

278

3-3. Using the hands-free phone system (for cellular phone)

Dialing by inputting a number

STEP 1

Press

and say “Dial by number”.

STEP 2

Press

and say the phone number.

STEP 3

Dial by one of the following methods:

a. Press

b. Press

and say “Dial”.

c. Select “Dial” using

279

3-3. Using the hands-free phone system (for cellular phone)

Dialing by inputting a name

STEP 1

Press

and say “Dial by name”.

STEP 2

Select a registered name to be input by either of the following methods:

a. Press

and say a registered name.

b. Press

and say “List names”. Press

while the

desired name is being read aloud. Dial by one of the following methods:

STEP 3

a. Press

b. Press

and say “Dial”.

c. Select “Dial” using

Speed dialing

STEP 1

Press

STEP 2

Press the preset button in which the desired number is regis- tered.

STEP 3

Press

280

3-3. Using the hands-free phone system (for cellular phone)

When receiving a phone call

■ Answering the phone

Press

■ Refusing the call

Press

Transferring a call

A call can be transferred between the cellular phone and system while dialing or receiving a call, or during a call. Use one of the follow- ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

b. Press

*1.

c. Press

and say “Call Transfer” *2.

*1: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

*2: While the vehicle is in motion, a call cannot be transferred from

the system to the cellular phone.

281

3-3. Using the hands-free phone system (for cellular phone)

Using the call history memory

Follow the procedure below to use a number stored in the call history memory:

STEP 1

STEP 2

Press and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-

played.

b. Select the desired number using

The following operations can be performed:

Dialing: Press

or select “Dial” using a voice command or

Storing the number in the phone book: Select “Store” using a voice

command or

Deleting: Select “Delete” using a voice command or

282

3-3. Using the hands-free phone system (for cellular phone)

■Call history

Up to 5 phone numbers can be stored in each of the outgoing and incoming call history memories.

■When talking on the phone

●Do not talk simultaneously with the other party. ●Keep the volume of the received voice down. Otherwise, voice echo will

increase.

283

3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a

voice command or

● Registering a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”

● Selecting the cellular phone to be used

1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”

● Changing a registered name

1. “Setup” → 2. “Phone Setup” → 3. “Change Name”

● Listing the registered cellular phones

1. “Setup” → 2. “Phone Setup” → 3. “List Phones”

● Deleting a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Delete”

● Changing the passkey

1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”

Registering a cellular phone

Select “Pair Phone” using a voice command or

, and do the

procedure for registering a cellular phone. (→P. 273)

284

3-3. Using the hands-free phone system (for cellular phone)

Selecting the cellular phone to be used

STEP 1

Select “Select Phone” using a voice command or

Pattern A

STEP 2

Select the cellular phone to be used by either of the following methods, and select “Confirm” using a voice command or

a. Press

and say the desired phone name.

b. Press

and say “List phones”. While the name of the

desired cellular phone is being read aloud, press

Pattern B

STEP 2

Select the cellular phone to be used using

Changing a registered name

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name of the cellular phone to be changed by one of the following methods:

a. Press

and say the desired phone name, and select

“Confirm” using a voice command or

285

3-3. Using the hands-free phone system (for cellular phone)

b. Press

and say “List phones”. While the desired

phone name is being read aloud, press