of the slot are flashing. After the disc is loaded, the shutter of the slot will close and the indicators will stop flashing. If no compact disc is inserted, the shutter will close after 15 seconds.
from
range
the knob
to adjust
is also used
the display. Then
Sound balance adjustment function— This knob the sound balance between the front and rear, and the right and left speakers. For front/rear adjustment, push “CONTROL / MODE” repeatedly until “FAd” appears on turn to adjust the front/rear balance. The display will show the “FAd−F7” to “FAd−R7”. For left/right adjustment, push “CONTROL / MODE” repeatedly until “BAL” appears on to turn adjust the left/right balance. The display will show “BAL−L7” to “BAL−R7”. DISC ƝƜ By using this button, you can select a disc you wish to listen to. Push either side of the button until the number of the disc you want to listen to appears on the display.
the display. Then
the knob
range
from
the
142
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Loading multiple compact discs— To load multiple compact discs, push and hold (until you hear a beep when the au- dio system is on). After pushing the but- ton, insert the first compact disc. At this time, the indicators on both sides of the slot are flashing. After the disc is loaded, the shutter of the slot will close and the indicators will stop flashing. After a few seconds, the shutter will automatically open again so the next disc can be in- serted. The same process can be applied for loading the rest of the discs. If no compact disc is inserted, the shutter will close after 15 seconds. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random): Compact Disc Player There are two random features—you can either listen to the tracks on all the com- pact discs in the magazine in random or- der, or only tracks on a specific compact disc in random order.
listen
the
to
in
the
and
push
in the
tracks
release
the tracks
To randomly play the tracks on a disc: Quickly “RAND”. “ ” will appear on the display. The disc you are listening to will play in ran- dom order. If you hear a beep, you held the button too long, and the player will play all the magazine in random order. To turn off the random fea- ture, push this button again. To randomly play all magazine: Push and hold “RAND” until you hear a beep. “ ” will appear on the display and the player will perform all the tracks on all the discs in the magazine in ran- dom order. To turn off the random feature, push this button again. RPT (Repeat) Cassette Player is playing. Push “RPT” while “ ” will appear on the display. When the it will automatically be track ends, rewound and replayed. This process will be continued until you push the button again to turn off the repeat feature. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly.
track
the
Compact Disc Player There are two repeat features—You can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” while the track is playing. “ ” will appear on the display. If you hear a beep, you held the button too long, and the player will repeat the whole disc. When the track ends, it will automatically be replayed. This pro- cess will be continued until you push the button again to turn off the repeat feature. Repeating a disc: Push and hold “RPT” until you hear a beep. “ ” will appear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the top track of the disc and replay. This process will be continued until you push the button again to turn off the re- peat feature.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
143
’03 HIGHLANDER_U (L/O 0208)
SCAN
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold “SCAN” until you hear a
beep. The radio will tune in the next pres-
et station up the band, stay there for 5
seconds, and then move to the next pre-
set station. To select a station, push
“SCAN” again.
To scan all the frequencies:
Quickly push and release “SCAN”. If you
hear a beep, you held the button too long,
and the radio will scan the preset sta-
tions. The radio will find the next station
up the station band, stay there for 5 se-
conds, and then scan again. To select a
station, push “SCAN” again.
Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are listening to. If you hear a beep, you held the button too long, and the player will scan the first track of all the discs in the magazine. To select a track, push “SCAN” again. If the player scanned all the tracks on the disc, it will stop scan- ning. Scanning the first track of all the discs in the magazine: “SCAN” until you hear a beep. Push “ ·SCAN” will appear on the display and the player will perform the first track of the next disc. To select a disc, push the “SCAN” again. If the player has scanned all the discs, it will stop scanning.
the seek mode,
the radio finds and the next station up or down the
SEEK (Seeking) Radio In plays station band. To seek a station, quickly push and re- lease the “Ɯ” or “Ɲ” under the “SEEK”. Do this again to find another station. Cassette Player By using this button, you can skip up or down to a different track. You can skip up to nine tracks at a time. Push the up or down side of the button. “FF 1” or “REW 1” will appear on the display. Next, push either side of the track button until the number on the display reaches the number of tracks you want to skip. If you push the button ten times, the skip feature will be turned off. When counting the number of tracks you want to rewind, remember to count the current track as well. For example, if you want to rewind to a song that is two be- fore the song you are listening to, push on the down side of the button until “REW 3” appears on the display.
144
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
TAPE Push “TAPE” to switch from radio or com- pact disc operation to cassette operation. If the audio system is off, you can turn on the cassette player by pushing “TAPE”. In both cases, a cassette must already be loaded in the player. TRACK (Track up/down button): Compact disc player By using this button, you can skip up or down to a different track. Push either side of the track button until the number of the track you want to listen to appears on the display. If you want to return the current track, push the down side of the button one time, quickly. TUNE (Tuning) Turn the knob clockwise to step up the frequency. Turn the knob counterclockwise to step down the frequency.
the beginning of
to
If you have pushed the track button more than you wanted to, push the other side of the button. The track number will be reduced. The track number you select is not valid if it is higher than the number of tracks remaining on the current cassette side. D After tape
the beginning of
is the player will automatically
reached, start playing the same side.
the
D After the end of the tape is reached, the player will automatically reverse sides and start playing the other side. There must be at least 3 seconds of blank space between tracks for the track button to work correctly. In addition, the feature may not work well with some spoken word, live, or classical recordings. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion.
Car audio system operating hints
NOTICE
To ensure correct audio system op- erations: z Be careful not to spill beverages
over the audio system.
z Do not put anything other than a cassette tape or Compact Disc into the slot.
z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the au- dio system which you are listening to. However, this does not indicate a malfunction.
RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio—it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. conditions change constantly as your vehicle moves.
In addition,
reception
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
145
’03 HIGHLANDER_U (L/O 0208)
signals are
Here are some common reception prob-
lems that probably do not indicate a prob-
lem with your radio:
FM
Fading and drifting stations—Generally, the
effective range of FM is about 40 km (25
miles). Once outside this range, you may
notice fading and drifting, which increase
with the distance from the radio transmit-
ter. They are often accompanied by distor-
tion.
Multi−path—FM
reflective,
making it possible for two signals to reach
your antenna at the same time.
If this
happens, the signals will cancel each oth-
er out, causing a momentary
flutter or
loss of reception.
Static and
fluttering—These occur when
signals are blocked by buildings, trees, or
other large objects. Increasing the bass
level may reduce static and fluttering.
the FM signal you
Station swapping—If
are
interrupted or weak-
is
ened, and there is another strong station
nearby on the FM band, your radio may
tune in the second station until the origi-
nal signal can be picked up again.
listening to
they can
AM Fading—AM broadcasts are reflected by the upper atmosphere–especially at night. These reflected signals can interfere with those received directly from the radio sta- tion, causing the radio station to sound alternately strong and weak. Station interference—When a reflected sig- nal and a signal received directly from a radio station are very nearly the same frequency, interfere with each other, making it difficult to hear the broad- cast. Static—AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electri- cal motors. This results in static. CARING FOR YOUR CASSETTE PLAYER AND TAPES For the best performance for your cas- sette player and tapes: Clean the tape head and other parts regu- larly. D A dirty
tape head or tape path can decrease sound quality and tangle your cassette to clean them is by using a cleaning tape. (A wet type is recommended.)
tapes. The easiest way
Use high−quality cassettes. D Low−quality cassette tapes can cause many problems, including poor sound, inconsistent and constant auto−reversing. They can also get stuck or tangled in the cassette player.
playing
speed,
D Do not use a cassette if it has been damaged or tangled or if its label is peeling off.
D Do not leave a cassette in the player if you are not listening to it, especially if it is hot outside.
D Store cassettes in their cases and out
of direct sunlight.
D Avoid using cassettes with a total play-
ing time longer than 100 minutes (50
minutes per side). The tape used in
these cassettes is thin and could get
stuck or tangled in the cassette player.
146
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
CARING FOR YOUR COMPACT DISC PLAYER AND DISCS D Your compact disc player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.
D Bumpy roads or other vibrations may
make your compact disc player skip.
D If moisture gets into your compact disc player, you may not hear any sound even though your compact disc player appears the disc from the player and wait until it dries.
to be working. Remove
CAUTION
Compact disc players use an invisible laser beam which could cause hazard- ous if directed outside the unit. Be sure to operate the player correctly.
radiation exposure
Special shaped discs
D Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM
Low quality discs
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
147
’03 HIGHLANDER_U (L/O 0208)
Labeled discs
NOTICE
To prevent damage to the player or changer, do not use special shaped, low quality or labeled discs such as those shown in the illustrations.
Correct
Wrong
inserting
D Handle compact discs carefully, espe- them. cially when you are them on the edge and do not Hold them. Avoid getting fingerprints bend on them, particularly on the shiny side. D Dirt, scrapes, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.)
D Remove discs from the compact disc player when you are not listening to them. Store them in their plastic cases away from moisture, heat, and direct sunlight.
To clean a compact disc: Wipe it with a soft, lint−free cloth that has been damp- ened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti−static device.
148
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
SECTION 1− 8
OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Manual air conditioning system
Controls Air flow selector settings Operating tips
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
150
153
153
Automatic air conditioning system
Controls Air flow selector settings Operating tips
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side vents
156
160
160
163
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
149
Manual air conditioning system— —Controls
’03 HIGHLANDER_U (L/O 0208)
1. Air intake selector 2. “A/C” button 3. Air flow selector 4. Temperature selector 5. Fan speed selector
150
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
Fan speed selector Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. Temperature selector Turn the knob to adjust the temperature— to the right to warm, to the left to cool.
’03 HIGHLANDER_U (L/O 0208)
This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again.
5. Windshield—Air flows mainly from the
to
flow selector
windshield vents. Turning the the air windshield position turns on the defog- ging function with the purpose of clear- ing the front view. This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again.
For details about air flow selector settings, see flow selector settings” de- scribed blow.
“—Air
Air flow selector Turn the knob to select the vents used for air flow. 1. Panel—Air
flows mainly
from
the
instrument panel vents.
2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor
vents.
the
4. Floor/Windshield—Air
flows mainly floor vents and windshield
from vents. the Turning floor/windshield position the defogging function with the purpose of clearing the front view.
to turns on
flow selector
the air
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
151
’03 HIGHLANDER_U (L/O 0208)
Air intake selector The air intake selector button is used to switch the air intake FRESH mode that the system and draws outside air into RECIRCULATED mode that recirculates the air inside vehicle. To turn the air source to RECIRCULATED mode, press the button. The indicator will come on. To turn the air source to FRESH mode, press the button again. The indica- tor will go off. To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system. “A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again. If the “A/C” button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your ve- hicle to a Toyota dealer for service.
152
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
—Air flow selector settings
’03 HIGHLANDER_U (L/O 0208)
—Operating tips D To cool off your Toyota after
it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).
D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.
D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.
for a minute
D On cold days, set the fan speed to high the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.
to help clear
D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except “OFF”.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
153
’03 HIGHLANDER_U (L/O 0208)
D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.
Heating For best results, set controls to:
Air conditioning For best results, set controls to:
Fan speed—Any setting except “OFF” Temperature—Towards WARM
Fan speed—Any setting except “OFF” Temperature—Towards COLD
(red zone)
Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF
(blue zone)
Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON
for a
few minutes. To keep
D For quick heating, select recirculated air the windows from fogging, select fresh af- ter interior has been warmed.
the vehicle
D For quick cooling, select recirculated
air for a few minutes.
Ventilation For best results, set controls to:
D Press the “A/C” button on for dehumidi-
fied heating.
Fan speed—Any setting except “OFF” Temperature—Towards COLD
D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield.
(blue zone)
Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF
154
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Defogging The inside of the windshield For best results, set controls to:
Defrosting The outside of the windshield For best results, set controls to:
Fan speed—Any setting except “OFF” Temperature—Towards WARM
Fan speed—Any setting except “OFF” Temperature—Towards WARM
(red zone) to heat; COLD (blue zone) to cool
Air intake—FRESH (outside air) Air flow—WINDSHIELD
Turning the air flow selector to the wind- shield or floor/windshield position turns on the defogging function with the purpose of clearing the front view. When turning the air flow selector to wind- shield or floor/windshield position, the air intake selects FRESH automatically. This is to clean up the front view more quickly. If you want to RECIRCULATE mode, press the air intake selector button once again. D On humid days, do not blow cold air on the windshield—the difference be- tween the outside and inside tempera- tures could make the fogging worse.
the setting
return
to
(red zone)
Air intake—FRESH (outside air) Air flow—WINDSHIELD
Turning the air flow selector to the wind- shield or floor/windshield position turns on the defrosting function with the purpose of clearing the front view. When turning the air flow selector to wind- shield or floor/windshield position, the air intake selects FRESH automatically. This is to clean up the front view more quickly. If you want to RECIRCULATE mode, press the air intake selector button once again. D To heat the vehicle interior while de- choose
the setting
windshield,
return
frosting floor/windshield air flow.
the
to
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
155
Automatic air conditioning system— —Controls
’03 HIGHLANDER_U (L/O 0208)
1. Air intake selector 2. “MODE” button (air flow selector) 3. Fan speed selector 4. “A/C” button 5. “OFF” button 6. Windshield air flow button 7. “AUTO” button 8. Temperature selector
156
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Temperature selector Turn the knob to adjust the temperature— to the right to warm, to the left to cool. “OFF” button Push the button to turn off the air condi- tioning system.
to select
the “MODE” button
“MODE” button (air flow selector) Push vents used for air flow. In automatic operation, you do not have to select the air flow unless you desire another air flow mode. 1. Panel—Air
flows mainly
from
the
the
instrument panel vents.
2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor
vents.
“AUTO” button For automatic operation of the air condi- tioning, press the “AUTO” button. An indi- cator light will illuminate to show that the automatic operation mode has been se- lected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on−off of the air conditioning according to the tem- perature. You may use manual controls if you want to select your own settings. To turn off the automatic operation, press the “OFF” button. Fan speed selector Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. In automatic operation, you do not have to adjust the fan speed unless you desire another fan speed mode.
4. Floor/Windshield—Air
flows mainly floor vents and windshield
the
from vents.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
157
’03 HIGHLANDER_U (L/O 0208)
When the “A/C” button is not pressed in, pressing another air flow button turns off the air conditioning. For details about air flow selector settings, see flow selector settings” de- scribed below.
“—Air
Air intake selector The air intake selector button is used to switch the air intake FRESH mode that the system and draws outside air into RECIRCULATED mode that recirculates the air inside vehicle. To turn the air source to RECIRCULATED mode, press the button. The indicator will come on. To turn the air source to FRESH mode, press the button again. The indica- tor will go off. If the engine coolant temperature becomes extremely high, RECIRCULATE mode will automatically be selected. This is not a malfunction. When the engine coolant tem- perature is the previous mode will resume. To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system.
lowered,
to
return
this button
is pressed, air
Windshield air flow button When flows mainly from the windshield vents and the FRESH mode is automatically set. This setting clears the front view more quickly. If you want to RECIRCULATE mode, press the air intake selector button once again. Pressing the button once again returns the air flow mode to the last one used. Pressing flow button turns on the defroster−linked air condition- ing. This is to clean up the front view more quickly.
the windshield air
the setting
158
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
“A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again. If the “A/C” button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your ve- hicle to a Toyota dealer for service.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
159
—Air flow selector settings
’03 HIGHLANDER_U (L/O 0208)
—Operating tips D To cool off your Toyota after
it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).
D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.
D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.
for a minute
D On cold days, set the fan speed to high the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.
to help clear
160
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except “OFF”.
’03 HIGHLANDER_U (L/O 0208)
D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.
Heating For best results, set controls to: For automatic operation—
Press in the “AUTO” button. Temperature—To the desired
temperature
Air intake—FRESH (outside air) Air conditioning—OFF
Air conditioning For best results, set controls to: For automatic operation—
Press in the “AUTO” button. Temperature—To the desired
temperature
Air intake—FRESH (outside air) Air conditioning—ON
For manual operation—
For manual operation—
Fan speed—To the desired fan speed Temperature—Towards WARM
Fan speed—To the desired fan speed Temperature—Towards COLD
(to the right)
Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF
(to the left)
Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON
for a
few minutes. To keep
D For quick heating, select recirculated air the windows from fogging, select fresh af- ter interior has been warmed.
the vehicle
D For quick cooling, select recirculated
air for a few minutes.
D Press the “A/C” button on for dehumidi-
fied heating.
D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
161
’03 HIGHLANDER_U (L/O 0208)
Ventilation For best results, set controls to: For automatic operation—
Press in the “AUTO” button. Temperature—Towards COLD
(to the left)
Air intake—FRESH (outside air) Air conditioning—OFF
For manual operation—
Fan speed—To the desired fan speed Temperature—Towards COLD
(to the left)
Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF
Defogging and defrosting— —The inside of the windshield For best results, set controls to: For automatic operation—
Temperature—Towards WARM
(to the right) to heat; COLD (to the left) to cool
Air intake—FRESH (outside air) Air flow—WINDSHIELD
For manual operation—
Fan speed—To the desired fan speed Temperature—Towards WARM
(to the right) to heat; COLD (to the left) to cool
Air intake—FRESH (outside air) Air flow—WINDSHIELD
Pressing the windshield button turns on the defroster−linked air conditioning. This is to clean up the front view more quickly. When the “A/C” button is not pressed in, pressing another air flow button turns off the air conditioning. D On humid days, do not blow cold air on the windshield—the difference be- tween the outside and inside tempera- tures could make the fogging worse.
—The outside of the windshield For best results, set controls to: For automatic operation—
Temperature—Towards WARM
(to the right)
Air intake—FRESH (outside air) Air flow—WINDSHIELD
When pressing the windshield air flow but- ton, the air intake selects FRESH auto- matically. This is to clean up the front view more quickly. If you want to to RECIRCULATE mode, press the air intake selector button once again.
the setting
return
162
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
For manual operation—
Side vents
Fan speed—To the desired fan speed Temperature—Towards WARM
(to the right)
Air intake—FRESH (outside air) Air flow—WINDSHIELD
return
the setting
When pressing the windshield air flow but- ton, the air intake selects FRESH auto- matically. This is to clean up the front view more quickly. If you want to to RECIRCULATE mode, press the air intake selector button once again. Pressing the windshield button turns on the defroster−linked air conditioning. This is to clean up the front view more quickly. When the “A/C” button is not pressed in, pressing another air flow button turns off the air conditioning. D To heat the vehicle interior while de- choose
windshield,
frosting floor/windshield air flow.
the
If air flow control is not satisfactory, check the side vents. The side vents may be opened or closed as shown.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
163
’03 HIGHLANDER_U (L/O 0208)
164
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
SECTION 1− 9
OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Multi−information display Clock Cigarette lighter and ashtrays Power outlets Glove box Garage door opener Auxiliary boxes Container Cup holderss Bottle holderss Tie−down hooks Luggage cover Roof luggage carrier Floor mat
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
166
167
168
169
170
170
173
174
175
177
177
178
179
181
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
165
’03 HIGHLANDER_U (L/O 0208)
Multi−information display
Air conditioning system on—
Air conditioning system off—
The multi−information display indicates the following information. 1. Outside temperature 2. Average vehicle speed 3. Average fuel consumption 4. Instantaneous fuel consumption 5. Driving time 6. Air conditioning system on—The air
conditioned temperature is displayed. Air conditioning system off—The air conditioned is not dis- played.
temperature
Every time you push the “INFO” button, the display toggles through this informa- tion. The displayed values in the multi−informa- tion display indicate general driving condi- tions. Accuracy varies with driving habits and road conditions. You can adjust the air conditioned temper- ature while the multi−information is operat- ing. 5 seconds has been passed after ad- justing the temperature or pushing “INFO” button, to the multi−information display.
the display will be back
1. Outside temperature
(“OUTSIDE TEMP”)
from
indi-
temperature
The outside temperature display cates the outside air temperature. The displayed ranges −22_F (−30_C) up to 122_F (50_C). If there is some abnormality in the con- nection of the outside air temperature sen- sor, “−−_F” (“−−_C”) will appear on the display. If “−−_F” (“−−_C”) appears on the display, contact your Toyota dealer. There may be a case that “−−_F” (“−−_C”) appears momentarily when the ignition is quickly turned to “ON”. It is normal if it goes out soon. 2. Average vehicle speed
(“AVG MPH” or “AVG km/h”)
Average vehicle speed is calculated and
displayed based on total driving dis-
tance and total driving time with the
engine running.
The displayed value is updated every 10
seconds.
To reset the calculation, push the “INFO”
button for more than 1 second.
166
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Clock
The calculation is reset when the ignition switch is turned off. 5. Driving time
(“E/T”)
The elapsed time after the engine starts
is displayed.
When the engine is started, driving time
is counted from 0:00. Up to 11:59 (11
hours, 59 minutes) can be displayed.
When the driving time exceeds 11:59, the
counter returns to 0:00.
The calculation is reset when the ignition
switch is turned off.
The digital clock indicates the time. The key must be in the “ACC” or “ON” position. To reset the hour: Push the “H” button. To reset the minutes: Push the “M” button. If the electrical power source has been disconnected from the clock, the time dis- play will automatically be set to 1:00 (one o’clock).
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
167
3. Average fuel consumption
(“AVG MPG” or “AVG L/100 km”)
total
Average fuel consumption is calculated
and displayed based on total driving
distance and
fuel consumption
with the engine running.
The displayed value is updated every 10
seconds.
To reset the calculations, push the “INFO”
button for more than 1 second.
4. Instantaneous fuel consumption
(“MPG” or “L/100 km”)
The instantaneous fuel consumption is
calculated and displayed based on dis-
tance and fuel consumption for 1 sec-
onds with the engine running.
The displayed value is updated every 2
seconds.
Note that an accurate figure may not be
shown in the following cases.
D When the vehicle is stopped with the
engine running, the display will indicate
the extremely high fuel consumption.
D When
the vehicle
is driving down a long slope, applying the engine brake, the display will indicate the extremely low fuel consumption.
’03 HIGHLANDER_U (L/O 0208)
Cigarette lighter and ashtrays
CIGARETTE LIGHTER To use the cigarette lighter, press it in. After it finishes heating up, it automati- cally pops out ready for use. If the engine is not running, the key must be in the “ACC” position. Do not hold the cigarette lighter pressed in. Use a Toyota genuine cigarette lighter or equivalent for replacement. ASHTRAYS Front ashtray (type A) and rear ashtray: To use the ashtray, pull it out. When finished with your cigarette, thor- oughly extinguish it in the ashtray to pre- vent other cigarette butts from catching fire. After using the ashtray, push it back in completely. To remove the ashtray, press down on the lock spring plate and pull out. Front ashtray (type B): To use the ash- tray, open the lid. When finished with your cigarette, thor- oughly extinguish it in the ashtray to pre- vent other cigarette butts from catching fire. After using the ashtray, push it back in completely.
Cigarette lighter
Front ashtray (type B)
Front ashtray (type A)
Rear ashtray
168
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
Power outlets
To remove the ashtray, pull the lid and pull it out.
CAUTION
To reduce the chance of in case of an accident or sudden stop while driving, always completely close the ashtray after use.
injury
’03 HIGHLANDER_U (L/O 0208)
The power outlets are designed power supply for car accessories. The key must be in the “ACC” or “ON” position for the power outlets to be used.
for
NOTICE
the
z To prevent
fuse
from being blown, do not use the electricity over the total vehicle capacity of 12V/120W (front and rear outlets to- gether).
Front
Rear
z To prevent the battery from being discharged, do not use the power outlets longer than necessary when the engine is not running.
z Close the power outlet
lids when the power outlets are not in use. Inserting a foreign object other than the appropriate plug that fits the outlet, or allowing any liquid into the outlet may cause electrical fail- ure or short circuits.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
169
’03 HIGHLANDER_U (L/O 0208)
Glove box
Garage door opener
transmitter prior
(a) Programming the HomeLinkR
The HomeLinkR in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
HomeLinkR, install a new battery in the
hand−held
to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away
the
HomeLinkR during the programming pro-
cess.
For Canadian users, follow the procedure
“Programming an entrance gate/Pro-
in
gramming all devices
the Canadian
market”.
1. Decide which of 3 HomeLinkR buttons
from
in
you want to program.
2. Place your hand−held garage transmit- ter 25 to 75 mm (1 to 3 in.) away from the surface of the HomeLinkR.
Keep the indicator light on the HomeLinkR in view while programming.
The garage door opener (HomeLinkR Universal Transceiver) is manufactured under license from HomeLinkR and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc.
To use the glove box, do this. To open: Pull the lever. With the instrument panel lights on, the glove box light will come on when the globe box is open. To lock: Insert the master key and turn it clockwise.
CAUTION
To reduce the chance of in case of an accident or a sudden stop, always keep the glove box door closed while driving.
injury
170
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
3. Simultaneously press and hold
the hand−held garage transmitter button along with the selected HomeLinkR but- ton.
4. When
the
indicator
the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons.
light on
5. Test the operation of the HomeLinkR by pressing the newly programmed button. If programming a garage door opener, check to see if the garage door opens and closes.
(on
light
indicator
If the garage door does not operate, iden- tify if your garage transmitter is of the “Rolling Code” type. Press and hold the programmed HomeLinkR button. The ga- rage door has the rolling code feature if the HomeLinkR) the flashes rapidly and then remains lit after 2 seconds. If your garage transmitter is the “Rolling Code” type, proceed to the heading “Programming a rolling code sys- tem”. 6. Repeat steps 2 through 5 for each re- maining HomeLinkR button to program another device.
it
is
to
is necessary
Programming a rolling code system “Rolling Code” If your device follow equipped, steps 1 through 4 under the heading “Programming the HomeLinkR” before proceeding with the steps listed below. 1. Locate the “training” button on the ceil- ing mounted garage door opener motor. The exact the button may vary by brand of garage door opener. Refer the owner’s guide supplied by the garage door opener manufacturer for the location of this “training” button.
location and color of
to
2. Press the “training” button on the ceil- ing mounted garage door opener motor. Following this step, you have 30 seconds in which to initiate step 3 below. 3. Press and release the vehicle’s pro- grammed HomeLinkR button twice. The garage door may open. the door does open, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door.
If
now
should
recognize
The ceiling mounted garage door opener motor the HomeLinkR unit and be able activate the garage door up/down. 4. Repeat steps 1 through 3 for each re- maining HomeLinkR button to program another rolling code system.
Programming an entrance gate/Program- ming all devices in the Canadian market 1. Decide which of the 3 HomeLinkR but-
2. Place
your
tons you want to program. hand−held
gate/device transmitter 25 to 75 mm (1 to 3 in.) away the HomeLinkR.
surface
from
the
of
Keep the indicator light on the HomeLinkR in view while programming. 3. Press
selected
hold
and
the
HomeLinkR button.
4. Continuously press and release (cycle)
transmitter
the hand−held gate/device
button every two seconds until step 5
is complete.
the
the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons.
light on
5. When
indicator
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
171
’03 HIGHLANDER_U (L/O 0208)
6. Test the operation of the HomeLinkR by pressing the newly programmed button. Check to see if the gate/device oper- ates correctly.
7. Repeat steps 1 through 6 for each re- maining HomeLinkR button to program another device.
Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. Reprogramming a button buttons cannot be Individual HomeLinkR erased, however, to reprogram a single button, follow the procedure “Programming the HomeLinkR”. (b) Operating the HomeLinkR To operate the appropriate HomeLinkR button to activate the programmed device. The HomeLinkR indicator light should come on. The HomeLinkR continues to send the signal for up the button is pressed.
the HomeLinkR, press
to 20 seconds as
long as
(c) Erasing
the
entire HomeLinkR
memory (all three programs)
To erase all previously programmed codes
at one time, press and hold down the 2
outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase
the programs stored
the HomeLinkR
memory.
in
CAUTION
D When programming the HomeLinkR Universal Transceiver, you may be operating a garage door or other device. Make sure people and ob- jects are out of the way of the ga- rage door or other device to pre- vent potential harm or damage.
D Do not use this HomeLinkR Univer- sal Transceiver with any garage door opener that lacks the safety stop and reverse feature as re- quired by federal safety standards. (This includes any garage door opener model manufactured before April 1, 1982.) A garage door open- er which cannot detect an object (signaling the door to stop and re- verse), does not meet current feder- al safety standards. Using a garage door opener without these features increases risk of serious injury or death.
172
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
following
This device complies with Part 15 of the FCC Rules and with RSS−210 of the Industry Canada. Operation is subject to the two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including in- terference that may cause undesired op- eration. WARNING: This transmitter has been tested and complies with FCC and Industry Canada DOC/MPAC rules. Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the use’s authority to operate the device.
Auxiliary boxes To use the auxiliary boxes, open the lids as shown in the following illustra- tions.
CAUTION
D To reduce the chance of injury in case of an accident or sudden stop, always keep the auxiliary box closed while driving.
D Type C—It is designed for holding a light objects, do not place any heavy objects in it. Heavy objects may cause the holder to open and contents to fly out resulting in inju- ries.
NOTICE
Type C—During hot weather, the inte- rior of the vehicle becomes very hot. Do not leave anything flammable or deformable such as a lighter, glasses, etc. inside.
Type A (instrument panel)
Type B (luggage compartment)
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
173
’03 HIGHLANDER_U (L/O 0208)
Container
Type C (ceiling)
Type E (rear console)
This container can be used as an auxil- iary holder.
Type D (rear console)
174
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Cup holders
CAUTION
Do not put objects in the container which can shift, roll out or be thrown out in the event of sudden stops or accidents. Objects which come out of the container can create a safety haz- ard due to interference with pedal op- eration or driver distraction. D Do not store drinks or cans which
could easily roll out.
D Do not store objects which are higher than the lower edge of the container.
D Do not store objects which are larg- er than the width of the container.
Type A (with rear console)
Type B (without rear console)
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
175
’03 HIGHLANDER_U (L/O 0208)
The cup holders are designed for hold- ing cups or drink−cans securely. Type A—To use the holder, open the lid. Type B—To use the holder, pull it out.
CAUTION
D Do not place anything else other than cups or drink−cans in the cup items may be holder, as such thrown about in the compartment and possibly injure people in the vehicle during sudden braking or in an accident.
D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the cup holder closed when it is not in use.
Type A only— The cup holder can be adjustable to the size of the cups or drink−cans by changing the holder position.
176
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Bottle holders
Tie−down hooks
CAUTION
Do not attempt to use the holder for any other purpose for which it was intended. Inappropriately sized or shaped objects may be thrown about in the compartment and possibly in- jure people in the vehicle during a sudden braking or an accident.
The bottle holders are designed to hold bottles securely.
NOTICE
When using the bottle holder, put the bottle with a cap. Otherwise, the liq- uid will spill over when opening or closing the door.
To secure your luggage, use the tie−down hooks as shown above. See “Luggage stowage precautions” on page 195 in Section 2 for precautions in loading luggage.
CAUTION
To avoid personal injury, keep the tie− down hooks folded in place on the floor when not in use.
NOTICE
Do not use the seat anchors instead of the tie−down hooks.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
177
’03 HIGHLANDER_U (L/O 0208)
Luggage cover
USING LUGGAGE COVER To use the luggage cover: 1. Hang the front hooks of the luggage cover to the claws on the back of the rear seats.
2. Pull out the rear luggage cover and
hook it on the anchors.
CAUTION
Do not place anything on the luggage cover. Such thrown about and possibly injure people in the vehicle during sudden braking or an accident.
items may be
from
REMOVING LUGGAGE COVER To remove the luggage cover, detach its hooks the back of rear seats. Then, retract and release both ends, and lift the luggage cover out. After you remove the luggage cover, place it somewhere other the passenger compartment. This will prevent passengers from injury in the event of a sudden stop or accident.
than
178
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
’03 HIGHLANDER_U (L/O 0208)
Roof luggage carrier
Cross rails
Side knobs
Upper knob
Roof rails
The roof roof rails and sliding cross rails.
luggage carrier consists of
ADJUSTING THE POSITION OF CROSS RAILS: 1. Turn the upper and side knobs coun- the cross
loosen
to
terclockwise rails.
2. Slide the cross rails to the appropri- ate position for loading the luggages and turn the side knobs clockwise to tighten the cross rails securely.
Vehicles with electric moon roof—There are cross rail stoppers on the roof rails the cross rails which help you prevent being the tilted up moon roof.
touched with
NOTICE
Vehicles with electric moon roof only—Do not remove the cross rail stoppers, or the moon roof may be damaged when it is tilted.
2003 HIGHLANDER from Aug. ’02 Prod. (OM48441U)
179
’03 HIGHLANDER_U (L/O 0208)
Follow the manufacture’s instructions and precautions when the attach- ments or their equivalent.
installing
CAUTION
When you load cargo on the roof lug- gage carrier, observe the following: D Place the cargo so that its weight is distributed evenly between the front and rear axles.
D If driving for a long distance, on rough roads, or at high speeds, stop the vehicle now and then dur- ing the trip to make sure the cargo remains in its place.
D Do not exceed 45 kg (100 lb.) cargo weight on the roof luggage carrier.
NOTICE
When loading the luggages, be careful not the moon roof.
the surface of
to scratch
3. In order to fix the cross rails to the appropriate the upper knobs clockwise after tightening all of the side knobs.
length, turn
CAUTION
them. Failure
Make sure the cross rails are fixed securely by pushing forward and rear- ward to do so may cause an unexpected accident or se- vere injury in the event of emergency