Download PDF Manual

Selecting a folder (CD player without changer only)


STEP 1


STEP 2


Press the “MODE” switch to select the CD mode. Press and hold the “∨ ∧” switch until you hear a beep.


230


3-2. Using the audio system


Selecting a disc in the CD player (CD player with changer only)


STEP 1


STEP 2


Press the “MODE” switch to select the CD mode. Press and hold the “∨ ∧” switch until you hear a beep.


CAUTION


n To reduce the risk of an accident


Exercise care when operating the audio switches on the steering wheel.


231


3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features (CD player with changer only)


This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.


Title


Using the hands-free phone system Making a phone call Setting a cellular phone Security and system setup Using the phone book


Page P. 235
P. 244
P. 248
P. 253
P. 257


n Conditions affecting operation


The hands-free phone system may not operate normally in the following situ- ations: l The cellular phone is turned off, or located outside the service area. l The cellular phone has a low battery. l The cellular phone is not connected to the system. l The cellular phone is behind the seat or in the glove box, or metal mate-


rial covers or touches the phone.


n When transferring ownership of the vehicle


Be sure to initialize the system to prevent personal data from being improp- erly accessed.


n Required profiles for the cellular phone


l HFP (Hands Free Profile) Ver. 1.0
l OPP (Object Push Profile) Ver. 1.1


232


3-3. Using the hands-free phone system (for cellular phone)


n Trademark owned by Bluetooth SIG. Inc.


n Certification for the hands-free phone system


FCC ID: HYQBTAU01A IC ID: 1551A-BTAU01A MADE IN JAPAN


NOTE: This device complies with Part 15 of the FCC Rules and RSS-210 of industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired oper- ation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Connect the equipment into an outlet on a circuit different from that to


Increase the separation between the equipment and receiver.


which the receiver is connected.


l Consult the dealer or an experienced radio/TV technician for help.


233


3-3. Using the hands-free phone system (for cellular phone)


FCC WARNING: Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive expo- sure evaluation (MPE). But it is desirable that it should be installed and oper- ated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.


CAUTION


n Caution while driving


Do not use a cellular phone, or connect the Bluetooth® phone.


NOTICE


n To prevent damage to a cellular phone


Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.


234


3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)


n Audio unit


Displays such items as message, name, and phone number


Lower-case characters and special characters, such as an umlaut, can- not be displayed.


Press and hold: Displays information that is too long to be displayed at one time on the screen Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Displays Bluetooth® con- nection condition


If BT is not displayed, the hands-free phone sys- tem cannot be used.


Displays the reception level


235


3-3. Using the hands-free phone system (for cellular phone)


n Steering wheel


Type A


Volume


The voice guidance vol- ume cannot be adjusted by using this button.


Hands-free phone system off/ends a call/refuses a call (on-hook switch) Hands-free phone system on/starts a call (off-hook switch) Press: Voice command sys- tem on Press and hold: Voice com- mand system off (talk switch)


236


3-3. Using the hands-free phone system (for cellular phone)


Type B


n Microphone


Volume


The voice guidance vol- ume cannot be adjusted by using this button.


Hands-free phone system on/starts a call (off-hook switch) Hands-free phone system off/ends a call/refuses a call (on-hook switch) Press: Voice command sys- tem on Press and hold: Voice com- mand system off (talk switch)


237


3-3. Using the hands-free phone system (for cellular phone)


Operating the system by using a voice command


By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands-


free phone system without checking the display or operating


n Operation procedure when using a voice command


Press the talk switch and say the command for a desired function. (→P. 240)


n Auxiliary commands when using a voice command


The following auxiliary commands can be used when operating the system using a voice command: Cancel: Exits the hands-free phone system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function


238


3-3. Using the hands-free phone system (for cellular phone)


Using the hands-free phone system for the first time


Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1
The introductory guidance and phone name registration instructions are heard. STEP 2


Register a phone name by either of the following methods.


Press the off-hook switch or the talk switch.


a. Select “Record Name” by using


, and say a name to


be registered.


b. Press the talk switch and say a name to be registered.


A voice guidance instruction to confirm the input is heard.


STEP 3


Select “Confirm” by using a voice command or


A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 4


Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.


Guidance for registration completion is heard.


239


3-3. Using the hands-free phone system (for cellular phone)


Menu list of the hands-free phone system


n Normal operation


First menu


Second menu


Third menu


Operation detail


Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory


Dialing by inputting a number


Dialing by inputting a name registered in the phone book Adding a new number Changing a name in the phone book Deleting the phone book data


Deleting a registered speed dial


Listing the phone book data


Registering a speed dial


Add Entry Change Name Delete Entry Delete Speed Dial (Del Spd Dial) List Names Set Speed Dial (Speed Dial)


Callback


Redial


Dial by number Dial by name


Phonebook


240


3-3. Using the hands-free phone system (for cellular phone)


First menu


Second menu


Third menu


Operation detail


Security


Setup


Phone Setup


System Setup


Set PIN Phonebook Lock Phonebook Unlock


Pair Phone


Change Name


Delete


List phones


Select phone


Set Passkey Guidance Vol- ume (Guidance Vol) Initialize


Setting a PIN code Locking the phone book


Unlocking the phone book


Registering the cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey


Setting voice guidance vol- ume


Initialization


241


3-3. Using the hands-free phone system (for cellular phone)


n Using a short cut key


First menu


Second menu


Operation detail


Dial “XXX (name)”


Phone book add entry


Phone book change name


Phone book delete entry Phone book set speed dial Phone book delete speed dial


Phonebook


Dialing a number registered in the phone book


Adding a new number


Changing the name of a phone number in the phone book


Deleting phone book data


Registering a speed dial


Deleting a speed dial


Phonebook Unlock Phonebook Lock


Unlocking the phone book Locking the phone book


242


3-3. Using the hands-free phone system (for cellular phone)


n Automatic adjustment of volume


When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.


n When using a voice command


For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say a command correctly and clearly.


n The system may not recognize your voice in the following situations:


l When driving on a rough road l When driving at high speeds l When air is blowing out of the vents onto the microphone l When the air conditioning fan emits a loud noise


n The following cannot be performed while driving:


l Operating the system with


l Registering a cellular phone to the system


n Changing the passkey


→P. 251


243


3-3. Using the hands-free phone system (for cellular phone) Making a phone call


n Making a phone call


l Dialing by inputting a number


“Dial by number”


l Dialing by inputting a name


“Dial by name” l Speed dialing l Dialing a number stored in the outgoing history memory


“Redial”


l Dialing a number stored in the incoming history memory


“Call back”


n Receiving a phone call l Answering the phone l Refusing the call n Transferring a call n Using the call history memory


l Dialing l Storing data in the phone book l Deleting


Dialing by inputting a number


STEP 1


STEP 2


STEP 3


Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number. Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.


c. Select “Dial” by using


244


3-3. Using the hands-free phone system (for cellular phone)


Dialing by inputting a name


STEP 1


STEP 2


Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk


switch while the desired name is being read aloud.


STEP 3


Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.


c. Select “Dial” by using


Speed dialing


STEP 1


STEP 2


STEP 3


Press the off-hook switch. Press the preset button in which the desired number is regis- tered. Press the off-hook switch.


When receiving a phone call


n Answering the phone


Press the off-hook switch.


n Refusing the call


Press the on-hook switch.


245


3-3. Using the hands-free phone system (for cellular phone)


Transferring a call


A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:


a. Operate the cellular phone.


Refer to the manual that comes with the cellular phone for the oper- ation of the phone.


b. Press the off-hook switch*1. c. Press the talk switch and say “Call Transfer”*2. *1: This operation can be performed only when transferring a call


from the cellular phone to the system during a call.


*2: While the vehicle is in motion, a call cannot be transferred from


the system to the cellular phone.


Using the call history memory


Follow the procedure below to use a number stored in the call history memory: STEP 1


Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-


played.


b. Select the desired number by using


STEP 2


246


3-3. Using the hands-free phone system (for cellular phone)


The following operations can be performed:


Dialing: Press the off-hook switch or select “Dial” by using a voice


command or


Storing the number in the phone book: Select “Store” by using a


voice command or


Deleting: Select “Delete” by using a voice command or


n Call history


Up to 5 numbers can be stored in each of the outgoing and incoming call his- tory memories.


n When talking on the phone


l Do not talk simultaneously with the other party. l Keep the volume of the received voice down. Otherwise, voice echo will


increase.


247


3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone


Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: n Functions and operation procedures To enter the menu for each function, follow the steps below by


using a voice command or


l Registering a cellular phone


1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”


l Selecting the cellular phone to be used


1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”


l Changing a registered name


1. “Setup” → 2. “Phone Setup” → 3. “Change Name”


l Listing the registered cellular phones


1. “Setup” → 2. “Phone Setup” → 3. “List Phones”


l Deleting a cellular phone


1. “Setup” → 2. “Phone Setup” → 3. “Delete”


l Changing the passkey


1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”


Registering a cellular phone


Select “Pair Phone” by using a voice command or procedure for registering a cellular phone. (→P. 239)


, and do the


248


3-3. Using the hands-free phone system (for cellular phone)


Selecting the cellular phone to be used


STEP 1


Select “Select Phone” by using a voice command or


Pattern A


STEP 2


Select the cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or


a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.


Pattern B


STEP 2


Select the cellular phone to be used by using


Changing a registered name


STEP 1


Select “Change Name” by using a voice command or


STEP 2


Select the name of the cellular phone to be changed by either of the following methods: a. Press the talk switch and say the desired phone name, and


select “Confirm” by using a voice command or


b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.


c. Select the desired phone name by using


249


3-3. Using the hands-free phone system (for cellular phone)


STEP 3


Press the talk switch or select “Record Name” by using


, and say a new name.


STEP 4


Select “Confirm” by using a voice command or


Listing the registered cellular phones


causes


Selecting “List Phones” by using a voice command or the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete”


250


3-3. Using the hands-free phone system (for cellular phone)


Deleting a cellular phone


STEP 1


Select “Delete” by using a voice command or


Pattern A


STEP 2


Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” by using a voice command


or


a. Press the talk switch and say the name of the desired cellu-


lar phone.


b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.


Pattern B


STEP 2


Select the desired cellular phone to be deleted by using


Changing the passkey


STEP 1


Select “Set Passkey” by using a voice command or


Pattern A


STEP 2


Press the talk switch, say a 4 to 8-digit number, and select


“Confirm” by using a voice command or


251


3-3. Using the hands-free phone system (for cellular phone)


Pattern B


STEP 2


Select a 4 to 8-digit number by using


The number should be input 1 digit at a time. When the entire number to be registered as a passkey has


STEP 3


been input, press


once again.


n The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.


252


3-3. Using the hands-free phone system (for cellular phone) Security and system setup


To enter the menu of each setting, follow the steps below: n Security setting items and operation procedure


l Setting or changing the PIN (Personal Identification Number)


1. “Setup” → 2. “Security” → 3. “Set PIN”


l Locking the phone book


1. “Setup” → 2. “Security” → 3. “Phonebook Lock”


l Unlocking the phone book


1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”


n System setup items and operation procedure


l Setting voice guidance volume


1. “Setup” → 2. “System Setup” → 3. “Guidance Vol” Initialization 1. “Setup” → 2. “System Setup” → 3. “Initialize”


can only be used for system setup operation.


Setting or changing the PIN


n Setting a PIN


STEP 1


Select “Set PIN” by using a voice command or


STEP 2


Enter a PIN by using a voice command or


When using


, input the code 1 digit at a time.


253


3-3. Using the hands-free phone system (for cellular phone)


n Changing the PIN


STEP 1


Select “Set PIN” by using a voice command or


STEP 2


Enter the registered PIN by using a voice command or


STEP 3


Enter a new PIN by using a voice command or


When using


, input the code 1 digit at a time.


Locking or unlocking the phone book


STEP 1


Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock


(Phbk Unlock)” by using a voice command or


STEP 2


Input the PIN by either of the following methods and select


“Confirm” by using a voice command or


a. Press the talk switch and say the registered PIN.


b. Input a new PIN by using


254


3-3. Using the hands-free phone system (for cellular phone)


Setting voice guidance volume


STEP 1


Select “Guidance Vol” by using


STEP 2


Change the voice guidance volume.


To decrease the volume: Turn


counterclockwise.


To increase the volume: Turn


clockwise.


Initialization


STEP 1


Select “Initialize” and then “Confirm” by using


STEP 2


Select “Confirm” by using


255


3-3. Using the hands-free phone system (for cellular phone)


n Initialization


l The following data in the system can be initialized:


• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code


l Once the initialization has been completed, the data cannot be restored


to its original state.


n When the phone book is locked


The following functions cannot be used: l Dialing by inputting a name l Speed dialing l Dialing a number stored in the call history memory l Using the phone book


256


3-3. Using the hands-free phone system (for cellular phone) Using the phone book


To enter the menu of each setting, follow the steps below:


l Adding a new phone number


1. “Phonebook” → 2. “Add Entry”


l Setting speed dial


1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”


l Changing a registered name


1. “Phonebook” → 2. “Change Name”


l Deleting registered data


1. “Phonebook” → 2. “Delete Entry”


l Deleting speed dial


1. “Phonebook” → 2. “Delete Speed Dial (Del Spd Dial)”


l Listing the registered data


1. “Phonebook” → 2. “List Names”


Adding a new phone number


The following methods can be used to add a new phone number: l Transferring data from the cellular phone


Inputting a phone number by using a voice command


Inputting a phone number by using


l Selecting a phone number from outgoing or incoming call history


257


3-3. Using the hands-free phone system (for cellular phone)


n Adding procedure


STEP 1


Select “Add Entry” by using a voice command or


STEP 2


Use one of the following methods to input a telephone num- ber:


Inputting a telephone number by using a voice command


STEP2-1 Select “By Voice” by using a voice command or


STEP2-2 Press the talk switch, say the desired number, and


select “Confirm” by using a voice command.


Transferring data from the cellular phone


STEP2-1 Select “By Phone” and then “Confirm” by using a


voice command or


STEP2-2 Transfer the data from the cellular phone.


Refer to the manual that comes with the cellular phone for the details of transferring data.


STEP2-3 Select the data to be registered by either of the fol-


lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice command.


b. Select the desired data by using


258


3-3. Using the hands-free phone system (for cellular phone)


Inputting a phone number by using


STEP2-1 Select “Manual Input” by using


STEP2-2 Input a phone number by using


, and press


once again.


Input the phone number 1 digit at a time.


Selecting a phone number from outgoing or incoming call history


STEP2-1 Select “Call History” by using a voice command or


STEP2-2 Select “Outgoing” or “Incoming” by using a voice


command or


STEP2-3 Select the data to be registered by either of the fol-


lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using a voice command.


b. Select the desired data by using


259


3-3. Using the hands-free phone system (for cellular phone)


STEP 3


Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or


a. Press the talk switch and say the desired name.


b. Select “Record Name” by using


, and say the


desired name.


STEP 4


Select “Confirm” by using a voice command or


STEP 3


In firm” registers the newly added phone number as a speed dial.


, selecting “Set Speed Dial (Speed Dial)” instead of “Con-


Setting speed dials


STEP 1


Select “Set Speed Dial (Speed Dial)” by using a voice com-


mand or


STEP 2


Select the data to be registered as a speed dial by either of the following methods: a. Press the talk switch, say desired number, and select “Con-


firm” by using a voice command or


b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,


and select “Confirm” by using a voice command or


c. Select the desired data by using


260


3-3. Using the hands-free phone system (for cellular phone)


STEP 3


Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by


using a voice command or


b. Press and hold the desired preset button.


Changing a registered name


STEP 1


Select “Change Name” by using a voice command or


STEP 2


Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select “Con-


firm” by using a voice command or


b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,


and select “Confirm” by using a voice command or


c. Select the desired name by using


STEP 3


Select “Record Name” with


or the talk switch.


STEP 4


Say a new name, and select “Confirm” by using a voice com-


mand or


261


3-3. Using the hands-free phone system (for cellular phone)


Deleting registered data


STEP 1


Select “Delete Entry” by using a voice command or


Pattern A


STEP 2


Select the data to be deleted by either of the following meth- ods, and select “Confirm” by using a voice command or


a. Press the talk switch, and say the name of the desired


phone number to be deleted.


b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.


Pattern B


STEP 2


Select the data to be deleted by using


Deleting speed dials


STEP 1


Select “Delete Speed Dial (Del Spd Dial)” by using a voice


command or


STEP 2


Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” by using a voice command or


262


3-3. Using the hands-free phone system (for cellular phone)


Listing the registered data


Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Set Speed Dial (Speed Dial)”


n Limitation of number of digits


A phone number that exceeds 24 digits cannot be registered.


263


3-4. Using the interior lights Interior lights list


Personal lights (→P. 266) Interior light (→P. 265) Engine switch light (vehicles without smart key system) Front door courtesy light


264


3-4. Using the interior lights


Interior light


n Illuminated entry system


The interior light (with the switch in the “DOOR” position) and engine switch light (vehicles without smart key system) automatically turn on/off according to “ENGINE START STOP” switch mode (vehicles with smart key system) or engine switch position (vehicles without smart key system), the presence of the electronic key (vehicles with smart key system), whether the doors are locked/unlocked and whether the doors are open/closed.


n To prevent the battery from being discharged


If the interior light and engine switch light (vehicles without smart key sys- tem) remain on when the door is not fully closed and the interior light switch is in the “DOOR” position, the lights will go off automatically after 20 minutes.


n Customization that can be configured at Toyota dealer


Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 454)


Interior light


Vehicles without moon roof


Door position Off On


265


3-4. Using the interior lights


Vehicles with moon roof


Interior light and personal lights


Door position Off On


Personal lights


Front


On/off


Rear (vehicles with moon roof)


On/off


When either of the rear side doors is opened, the light on that side turns on automatically. Clos- ing the rear side doors will turn the lights off.


266


3-5. Using the storage features List of storage features


Auxiliary boxes Glove box Cup holders Console box


267


3-5. Using the storage features


Glove box


Glove box and console box


Open (pull the lever) Lock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem)


n Glove box light


The glove box light turns on when the tail lights are turned on.


CAUTION


n Caution while driving


Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.


Console box


Lift the lid while pulling the lever.


268


3-5. Using the storage features


Console box


n When using the console box lid as an armrest (if equipped)


If necessary, the console box lid can slide forward. Pull the lid forward by grasping the front of the lid.


n Tray in the rear console box


The tray slides forward/backward and can be removed.


CAUTION


n Caution while driving


Keep the console box closed. Injuries may result in the event of an accident or sudden braking.


269


3-5. Using the storage features


Cup holders


Manual transmission


Lift the lid.


Cup holders


Automatic transmission (type A)


Lift the lid.


Automatic transmission (type B)


To open, press down and release the right side of the cup holder lid.


270


3-5. Using the storage features


Cup holders


Rear (type A)


Pull the armrest down.


Rear (type B)


Pull the armrest down and lift the lid.


n Using the cup holder (front) to store small items (automatic transmis-


sion)


Remove the holder.


271


3-5. Using the storage features


Cup holders and auxiliary boxes


CAUTION


n Items unsuitable for the cup holder


Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.


n When not in use


Keep the cup holders closed. Injuries may result in the event of an accident or sudden braking.


Auxiliary boxes


Driver's side instrument panel


Pull the handle.


272


3-5. Using the storage features


Auxiliary boxes


Overhead console


Push the lid.


Front console


Push the lid.


Center console (if equipped)


Push the lid.


273


3-5. Using the storage features


n Cable pass-through


Auxiliary boxes


The auxiliary box of the front console is provided with a hole that allows cables to be passed into the cabin from the power outlet and AUX adapter inside.


Remove the lid. Push out and remove the outer lid.


CAUTION


n Caution while driving


Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.


n Items that should not be left in the overhead console


Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.


274


3-6. Other interior features Sun visors


Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.


275


3-6. Other interior features Vanity mirrors


Slide the cover.


The light turns on when the cover is opened. (if equipped)


276


3-6. Other interior features Clock


Adjusts the hour. Adjusts the minutes.


n The clock is displayed when


Vehicles with smart key system


The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.


Vehicles without smart key system


The engine switch is in “ACC” or “ON” position.


277


3-6. Other interior features Ashtrays (if equipped)


An ashtray can be installed in a cup holder. (→P. 270)


CAUTION


n When not in use


Keep the ashtray closed. Injuries may result in the event of an accident or sudden braking.


n To prevent fire


l Fully extinguish matches and cigarettes before putting them in the ashtray,


then make sure the ashtray is fully closed.


l Do not place paper or any other type of flammable object in the ashtray.


278


3-6. Other interior features Power outlet


The power outlet can be used for 12 V accessories that run on less than 10 A. Type A


Type B


Type C


279


3-6. Other interior features


n The power outlet can be used when


Vehicles with smart key system


The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.


Vehicles without smart key system


The engine switch is in “ACC” or “ON” position.


n Cable pass-through


Connected cables can be passed through the hole in the auxiliary box to the front passenger’s side of the auxiliary box. (→P. 274)


NOTICE


n To avoid damaging the power outlet


Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.


n To prevent the fuse from being blown


Do not use an accessory that uses more than 12 V 10 A.


n To prevent the battery from being discharged


Do not use the power outlet longer than necessary when the engine is not running.


280


3-6. Other interior features Seat heaters (if equipped)


Heats the left front seat Heats the right front seat The indicator light comes on.


n The seat heaters can be used when


Vehicles with smart key system


The “ENGINE START STOP” switch is in IGNITION ON mode.


Vehicles without smart key system The engine switch is in “ON” position.


n When not in use


Turn the seat heater off. The indicator light turns off.


CAUTION


n Burns


l Use caution when seating the following persons in a seat with the seat


heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping


Loading...
x