Download PDF Manual


Auxiliary box ∗ P. 272


Power outlet P. 279


Manual transmission


Manual transmission shift lever P. 137


Cup holder P. 270


Parking brake lever P. 139


12


Pictorial index


Instrument panel


Gauges and meters Multi-information display ∗


P. 141
P. 149


Headlight switch Turn signal lever Fog light switch ∗


P. 152
P. 138
P. 156


Outside rear view mirror switches P. 66


P. 277


Clock Security indicator


P. 77, 79


Emergency flasher switch


Audio system P. 201
Navigation system *1


Fuel filler door opener


P. 73


Trunk opener P. 46


Hood lock release lever P. 313


Auxiliary box P. 272


Tire pressure warning reset switch P. 336
Windshield wiper and washer switch P. 157


Tilt and telescopic steering control lever P. 63
Parking brake pedal ∗ P. 139
∗: If equipped *1: Refer to “Navigation System Owner’s Manual”.


13


Pictorial index


Instrument panel


Automatic air conditioning system


Air conditioning system P. 186


Rear window and outside rear view mirror defogger switch P. 199


Manual air conditioning system


Air conditioning system P. 194


Rear window defogger switch Outside rear view mirror defogger switch ∗


P. 199


P. 199


14


B


Type A


“DISP” switch ∗ P. 150


Audio remote control *2
switches


P. 229


Air conditioning remote control switches ∗ P. 191


Telephone switches ∗


P. 236


*2


Engine switch (vehicles without smart key system) P. 130
Talk switch ∗


P. 236


*2


Cruise control switch P. 159


“ENGINE START STOP” switch (vehicles with smart key system) P. 126


∗: If equipped *2: For vehicles with a navigation system, refer to “Navigation System Owner’s Manual”.


15


Pictorial index


Instrument panel


Type B


Audio remote control *2
switches


P. 229


Engine switch (vehicles without smart key system) P. 130


Telephone switches P. 236


*2


Cruise control switch P. 159


Talk switch ∗


P. 236


*2


16


C


Power outlet P. 279


AUX adapter P. 228


Cable pass-through P. 274


Seat heater switches ∗ P. 281


∗: If equipped *2: For vehicles with a navigation system, refer to “Navigation System Owner’s Manual”.


17


1-1. Key information Keys


The following keys are provided with the vehicle.


Vehicles with smart key system


Electronic keys • Operating the smart key


system (→P. 26)


• Operating


the wireless


remote control function (→P. 37)


Mechanical keys Key number plate


Vehicles without smart key system (type A)


Master keys Operating the wireless remote control function (→P. 37) Valet key Key number plate


Vehicles without smart key system (type B)


Master keys Valet key Key number plate


24


1


1-1. Key information


Using the mechanical key (vehicles with smart key system)


Take out the mechanical key.


After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key. (→P. 415)


n When required to leave a key to the vehicle with a parking attendant


Lock the glove box and the trunk storage extension (if equipped) as circum- stances demand. Set the luggage security system. (→P. 47, 268, 285) Vehicles with smart key system: Remove the mechanical key for your own use and provide the attendant with the electronic key only. Vehicles without smart key system: Carry the master key for your own use and leave the valet key only with the attendant.


n Key number plate


Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 414)


NOTICE


n To prevent key damage


l Do not subject the keys to strong shocks, expose them to high tempera-


tures by placing them in direct sunlight, or get them wet.


l Do not expose the keys to electromagnetic materials or attach any mate-


rial that blocks electromagnetic waves to the key surface.


l Do not disassemble the electronic key.


25


1-2. Opening, closing and locking the doors and trunk Smart key system (if equipped)


The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.)


Locks and unlocks the doors (→P. 27) Unlocks the trunk (→P. 27) Starts the engine (→P. 126)


26


1-2. Opening, closing and locking the doors and trunk


Locking and unlocking the doors (front door handles only)


Press the lock button to lock the door.


Unlocking the trunk


Grip the handle to unlock the door.


Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after is locked.


the door


Press the button to unlock the trunk.


27


1-2. Opening, closing and locking the doors and trunk


Antenna location and effective range


n Antenna location


Antennas outside the cabin Antenna outside the trunk Antenna inside the trunk Antennas inside the cabin


28


1


1-2. Opening, closing and locking the doors and trunk


n Effective range (areas within which the electronic key is


detected)


(Only


When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles. the doors detecting the key can be operated.) When starting the engine or changing “ENGINE START STOP” switch modes The system can be operated when the electronic key is inside the vehicle. When unlocking the trunk The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the trunk release button.


29


1-2. Opening, closing and locking the doors and trunk


n Operation signals


A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice)


n Conditions affecting operation


The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly. (Ways of coping: →P. 415) l When the electronic key battery is depleted l Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electri- cal noise


l When carrying a portable radio, cellular phone, cordless phone or other


wireless communication devices


l When the electronic key has come into contact with, or is covered by, a


metallic object


l When multiple electronic keys are in the vicinity l When carrying or using the electronic key together with the following


devices that emit radio waves • Another vehicle’s electronic key • A wireless key that emits radio waves • Personal computer If window tint with a metallic content or metallic objects are attached to the rear window


30


1-2. Opening, closing and locking the doors and trunk


n Switching the door unlock function


It is possible to set which doors the entry function unlocks. STEP 1


Turn the “ENGINE START STOP” switch OFF.


STEP 2


When hold


the


indicator on


, or


the key surface


is off, press and for approximately 5 seconds while


pressing the


button on the key.


The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)


Multi-information


display


Unlocking doors


Beep


Hold the driver's door han- dle to unlock only the driver's door. Hold the front passenger's door handle except the driver’s door handle to unlock all doors Hold the front passenger's door handle to unlock all doors


Exterior: Beeps three times Interior: Pings once


Exterior: Beeps twice Interior: Pings once


STEP 3


Unlock the doors using the electronic key and open one of the doors. If a door is not opened within 60 seconds after doors will be locked again and the alarm will automatically be set. In case that the alarm is triggered, immediately stop the alarm. (→P. 79)


is pressed, the


31


1-2. Opening, closing and locking the doors and trunk


n Battery-saving function


In the following circumstances, the entry function is disabled in order to pre- vent the vehicle and electronic key batteries from discharging. l When the entry function has not been used for 2 weeks or more l When the electronic key has been left within approximately 7 ft. (2 m) of


the vehicle for 10 minutes or more


The system will resume operation when... l The vehicle is locked using the door handle lock switch. l The vehicle is locked/unlocked using the wireless remote control func-


tion. (→P. 37)


l The vehicle is locked/unlocked using the mechanical key. (→P. 415)


n Electronic key battery depletion


l The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted. Replace the battery when necessary. (→P. 353)


l To avoid serious deterioration, do not leave the electronic key within 3 ft.


(1 m) of the following electrical appliances. • TVs • Personal computers • Recharging cellular phones or cordless phones • Table lamps


n To operate the system properly


Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door lock prevention may not func- tion.)


32


1


1-2. Opening, closing and locking the doors and trunk


n Note for the smart key system


l Even when the electronic key is within the effective range (detection


areas), the system may not operate properly in the following cases. • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.


• The electronic key is near the ground or in a high place, or too close to


the rear bumper center when the trunk is unlocked.


• The electronic key is on the instrument panel, package tray, floor, or in the auxiliary box of the driver's side instrument panel or glove box when the engine is started or “ENGINE START STOP” switch modes are changed.


l As long as the electronic key is within the effective range, the doors may


be locked or unlocked by anyone.


l Even if the electronic key is not inside the vehicle, it may be possible to


start the engine if the electronic key is near the window.


l The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.)


l Gripping the door handle when wearing a glove may not unlock the door. If the wireless remote control is used to lock the doors when the elec- tronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.)


n When the vehicle is not driven for extended periods


To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2
m) of the vehicle. n Security feature


If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.


n Alarms and warning indicators


A combination of exterior and interior alarms as well as warning messages shown on the multi-information display are used to reduce the chance of vehicle theft and accidents resulting from erroneous operation. Take appro- priate measures according to the warning message on the multi-information display. (→P. 391)


33


1-2. Opening, closing and locking the doors and trunk


The following table describes circumstances and correction procedures when only alarms are sounded.


Alarm


Situation


Exterior alarm sounds once for 2 seconds


Exterior alarm sounds once for 10 seconds


Exterior alarm sounds once for 60 seconds


Interior alarm sounds continu- ously


Interior alarm beeps repeatedly


Tried to lock the doors using the entry function while the electronic key is still inside the passenger compartment Closed the trunk while the electronic key is still inside the trunk and all doors are locked Tried to lock the vehicle using the entry function while a door is open Tried to exit the vehicle with the electronic key and lock the doors without first turning the “ENGINE START STOP” switch OFF Tried to open the door and exit the vehicle without shifting the shift lever to P Turned the “ENGINE START STOP” switch to ACCESSORY mode while the driver's door is open (Opened the driver's door when the “ENGINE START STOP” switch is in ACCESSORY mode.) Turned the “ENGINE START STOP” switch OFF while the driver's door is open


Correction procedure Retrieve the elec- tronic key from the passenger compart- ment and lock the doors again. Retrieve the elec- tronic key from the trunk and close the trunk lid. Close all of the doors and lock the doors again.


Turn the “ENGINE START STOP” switch OFF and lock the doors again.


Shift the shift lever to P.


Turn the “ENGINE START STOP” switch OFF and close the driver's door.


Close the driver's door.


34


1


1-2. Opening, closing and locking the doors and trunk


n If the smart key system does not operate properly


l Locking and unlocking the doors and trunk: Use the mechanical key.


(→P. 415)


l Starting the engine: →P. 416


n When the electronic key battery is fully depleted


→P. 353


n Customization that can be configured at Toyota dealer


It is possible to deactivate the smart key system, etc. (Customizable features →P. 454)


n Certification for the smart key system


For vehicles sold in the U.S.A.


FCC ID: NI4TMLF-3


NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:


35


1-2. Opening, closing and locking the doors and trunk


l Reorient or relocate the receiving antenna. l Connect the equipment into an outlet on a circuit different from that to


Increase the separation between the equipment and receiver.


which the receiver is connected.


l Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.


For vehicles sold in Canada


NOTE: Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.


CAUTION


n Caution regarding interference with electronic devices


l People with implanted pacemakers or cardiac defibrillators should main- tain a reasonable distance between themselves and the smart key system antennas. (→P. 28) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.


l User of any electrical medical device other than implanted pacemakers and implanted cardiac defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.


Ask your Toyota dealer for details for disabling the entry function.


36


1


1-2. Opening, closing and locking the doors and trunk Wireless remote control (if equipped)


The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle.


Vehicles with smart key system


Vehicles without smart key system


Locks all doors Unlocks all doors Unlocks the trunk (press and hold) Sounds an alarm (press and hold)


Locks all doors Sounds an alarm (press and hold) Unlocks all doors Unlocks the trunk (press and hold)


n 2-step unlocking function


When you press the the button again within 3 seconds unlocks the other doors.


button, the driver's door is unlocked. Pressing


n Operation signals


Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice)


Trunk: A buzzer sounds to indicate that the trunk has been unlocked.


37


1-2. Opening, closing and locking the doors and trunk


n Door lock buzzer


If a door is not fully closed, a buzzer sounds continuously for 10 seconds if an attempt to lock the door is made. Fully close the door to stop the buzzer, and lock the vehicle once more.


n Panic mode


Vehicles with smart key system


When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the electronic key.


Vehicles without smart key system


When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the wireless remote control.


n Key battery depletion


Vehicles with smart key system


→P. 32


Vehicles without smart key system


The standard battery life is 1 to 2 years. (The battery becomes depleted even if the key is not used.) If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 353)


38


1-2. Opening, closing and locking the doors and trunk


n Security feature


If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.


n When the electronic key battery is fully depleted (vehicles with smart


key system) →P. 353


n Conditions affecting operation Vehicles with smart key system


→P. 30


Vehicles without smart key system


The wireless remote control function may not operate normally in the follow- ing situations. l Near a TV tower, radio station, electric power plant, airport or other facil-


ity that generates strong radio waves


l When carrying a portable radio, cellular phone or other wireless commu-


nication devices


l When multiple wireless keys are in the vicinity l When the wireless key has come into contact with, or is covered by, a


metallic object


l When a wireless key (that emits radio waves) is being used nearby l When the wireless key has been left near an electrical appliance such as


a personal computer


39


1-2. Opening, closing and locking the doors and trunk


n Customization that can be configured at Toyota dealer


Settings (e.g. trunk unlocking function) can be changed. (Customizable fea- tures →P. 454)


n Certification for wireless remote control


For vehicles sold in the U.S.A.


NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Connect the equipment into an outlet on a circuit different from that to


Increase the separation between the equipment and receiver.


which the receiver is connected.


l Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.


For vehicles sold in Canada


NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.


40


1-2. Opening, closing and locking the doors and trunk Doors


The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. n Entry function (vehicles with smart key system)


→P. 26


n Wireless remote control (if equipped)


→P. 37


n Key


Vehicles with smart key system The doors can also be locked and unlocked with the mechanical key. (→P. 415) Vehicles without smart key system


Locks all doors Unlocks all doors Turning the key unlocks the driver's door. Turning the key again unlocks the other doors.


n Door lock switch


Locks all doors Unlocks all doors


41


1-2. Opening, closing and locking the doors and trunk


n Inside lock button


Unlocks the door Locks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.


Locking the front doors from the outside without a key


Vehicles with smart key system The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle. Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked. Vehicles without smart key system The door cannot be locked if either of the front doors is open and the key is in the engine switch.


Rear door child-protector lock


The door cannot be opened from inside the vehicle when the locks are set.


These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.


42


1-2. Opening, closing and locking the doors and trunk


Automatic door locking and unlocking systems


The following functions can be set or cancelled:


Operation


Function


Shift position linked door locking function* Shift position linked door unlocking func- tion* Speed linked door lock- ing function


Driver's door linked door unlocking function


Shifting the shift lever out of P locks all doors.


Shifting the shift lever to P unlocks all doors.


All doors are locked when the vehicle speed is approximately 12 mph (20 km/h) or higher.


Vehicles with smart key system


All doors are unlocked when the driver's door is opened within 10 seconds after turning the “ENGINE START STOP” switch to ACCES- SORY mode or OFF.


Vehicles without smart key system


All doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch to “ACC” or “LOCK”.


*: Vehicles with an automatic transmission only


43


1-2. Opening, closing and locking the doors and trunk


n Setting and canceling the functions


To switch between set and canceled, follow the procedure below:


STEP 1


STEP 2


Vehicles with smart key system: Close all the doors and switch the “ENGINE START STOP” switch to IGNITION ON mode. (Perform the step 2 within 10
seconds.) Vehicles without smart key system: Close all the doors and switch the engine switch to “ON” posi- tion. (Perform step 2 within 10 seconds.)


Shift the shift lever to P or N, and press and hold the driver's door lock switch ( ) for approx- imately 5 seconds and then release.


or


corresponding


The shift lever and switch posi- tions the desired function to be set or can- celed are shown as follows.


to


Function


Shift lever position


Switch position


Shift position linked door lock- ing function* Shift position linked door unlocking function* Speed linked door locking func- tion Driver's door linked door unlock- ing function *: Vehicles with an automatic transmission only When the setting or canceling operation is complete, all doors are locked and then unlocked.


44


1-2. Opening, closing and locking the doors and trunk


n Customization that can be configured at Toyota dealer


Settings (e.g. unlocking function using a key) can be changed. (Customiz- able features →P. 454)


CAUTION


n To prevent an accident


Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. l Always use a seat belt. l Always lock the doors. l Ensure that all doors are properly closed. l Do not pull the inside handle of either of the front doors while driving. l Set the rear door child protector locks when children are seated in the rear


seat.


45


1-2. Opening, closing and locking the doors and trunk Trunk


The trunk can be opened using the key, trunk opener, entry function or wireless remote control. n Entry function (vehicles with smart key system)


→P. 26


n Wireless remote control (if equipped)


→P. 37


n Key


Vehicles with smart key system The trunk can be opened using the mechanical key. (→P. 415) Vehicles without smart key system


Turn the master key clockwise to release the trunk lid.


n Trunk opener


Release the trunk lid.


46


1-2. Opening, closing and locking the doors and trunk


Luggage security system


To protect luggage stored in the trunk against theft, do the following procedure.


Turn the master key (vehicles without smart key system) or mechanical key (vehicles with smart key system) counterclock- wise to lock the trunk opener fea- ture.


The trunk lid cannot be opened even with the wireless remote control or the entry function.


the glow-in-the-dark


The trunk lid can be opened by pulling down on lever located on the inside of trunk lid. The lever will continue to glow for some time after the trunk lid is closed.


n Internal trunk release lever


n Trunk light


The trunk light turns on when the trunk is opened.


47


1-2. Opening, closing and locking the doors and trunk


CAUTION


n Caution while driving


Keep the trunk lid closed. This not only keeps personal belongings from being thrown out, but also pre- vents exhaust gases from entering the vehicle.


n When children are in the vehicle


Never leave children unattended in the vehicle as they may lock themselves in the vehicle or trunk, which could cause the child to overheat or suffocate, resulting in death or serious injury.


48


1-3. Adjustable components (seats, mirrors, steering wheel) Front seats


Power seat


Seat position switch Seatback angle switch Seat cushion (front) angle switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumbar support switch (driver’s side only)


49


1-3. Adjustable components (seats, mirrors, steering wheel)


Manual seat


Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only)


CAUTION


n Seat adjustment


l Do not recline the seat more than necessary when the vehicle is in motion


to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.


l Manual seat only: After adjusting the seat, make sure that the seat is


locked in position.


50


1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats


n Adjusting the rear seat (if equipped)


Pull up the seatback angle adjustment lever until the lock is completely released.


51


1-3. Adjustable components (seats, mirrors, steering wheel)


n Folding down rear seatbacks (if equipped)


Pull the seatback lever in the trunk for the seatback you wish to fold down.


CAUTION


n After returning the seatback to the upright position


Observe the following precautions. Failure to do so may result in death or serious injury. l Make sure the seatback is securely locked by pressing forward and rear-


ward on the top of the seatback.


l Check that the seat belts are not twisted or caught in the seatback.


NOTICE


n When right seatback is folded down


Make sure the luggage loaded in the enlarged trunk will not damage the webbing of the rear center seat belt.


52


1


1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints


Lock release button


Vertical adjustment Push and hold the lock release button when lowering the head restraint. Removal Pull the head restraint up while pressing the lock release but- ton.


n Adjusting the height of the head restraints


Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.


n Adjusting the rear center seat head restraint


Always raise the head restraint one level from the stowed position when using.


53


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Head restraint precautions


Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. l Use the head restraints designed for each respective seat. l Adjust the head restraints to the correct position at all times. l After adjusting the head restraints, push down on them and make sure


they are locked in position.


l Do not drive with the head restraints removed.


54


1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts


Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. n Correct use of the seat belts


l Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoul- der.


l Position the lap belt as low


as possible over the hips.


l Adjust the position of the seatback. Sit up straight and well back in the seat. l Do not twist the seat belt.


n Fastening and releasing the seat belt


Fastening the belt Push the tab into the buckle until a clicking sound is heard. Releasing the belt Press the release button.


Release button


55


1-3. Adjustable components (seats, mirrors, steering wheel)


n Adjusting the height of the belt (front seats)


Down Up Move the height adjuster up and down as needed until you hear a click.


Seat belt comfort guide (outside rear seat)


If the shoulder belt sits close to a person's neck, use the seat belt comfort guide.


Pull out the comfort guide from the pocket.


Slide the belt past the slot of the guide.


The elastic cord must be behind the seat belt.


STEP 1


STEP 2


56


1-3. Adjustable components (seats, mirrors, steering wheel)


STEP 3


Buckle, position and release the seat belt.


Seat belt pretensioners (front seats)


The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.


The pretensioner may not acti- vate in the event of a minor frontal impact, a side impact or a rear impact.


57


1-3. Adjustable components (seats, mirrors, steering wheel)


n Emergency locking retractor (ELR)


The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.


n Automatic locking retractor (ALR)


When a passenger's shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (→P. 105)


n Pregnant women


Obtain medical advice and wear the seat belt in the proper way. (→P. 55) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. Extend the shoulder belt com- pletely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only a pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a collision.


n People suffering illness


Obtain medical advice and wear the seat belt in the proper way.


58


1


1-3. Adjustable components (seats, mirrors, steering wheel)


n Child seat belt usage


The seat belts of your vehicle were principally designed for persons of adult size. l Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle's seat belt. (→P. 101) l When the child becomes large enough to properly wear the vehicle's seat


belt, follow the instructions on P. 55 regarding seat belt usage. n Replacing the belt after the pretensioner has been activated


The seat belts cannot be used after a pretensioner has been activated. After an accident, have the pretensioners inspected by your Toyota dealer. Make sure the pretensioners are replaced if they have been activated.


n Seat belt extender


If your seat belts cannot be fastened securely because long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.


they are not


Use the seat belt after passing it through the guide if the seat belt comes free from the guide.


n Rear seat belt


59


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Wearing a seat belt


Observe the following precautions to reduce the risk of injury in the event of sudden braking or an accident. Failing to do so may cause death or severe injury. l Ensure that all passengers wear a seat belt. l Always wear a seat belt properly. l Each seat belt should be used by one person only. Do not use a seat belt


for more than one person at once, including children.


l Toyota recommends that children be seated in the rear seat and always


use a seat belt and/or an appropriate child restraint system.


l Do not recline the seat any more than necessary to achieve a proper seat- ing position. The seat belt is most effective when the occupants are sitting up straight and well back in the seats.


l Do not wear the shoulder belt under your arm. l Always wear your seat belt low and snug across your hips.


n Seat belt pretensioners


Do not place anything, such as a cushion, on the front passenger's seat. Doing so will disperse the passenger's weight, which prevents the sensor from detecting the passenger's weight properly. As a result, the seat belt pre- tensioner for the front passenger's seat may not activate in the event of a collision.


60


1


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Seat belt damage and wear


l Do not damage the seat belts by allowing the belt, plate, or buckle to be


jammed in the door. Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belts cannot protect an occupant from death or serious injury.


l Ensure that the belt and tab are locked and the belt is not twisted.


If the seat belt does not function correctly, immediately contact your Toyota dealer.


l Replace the seat assembly, including the belts, if your vehicle has been


involved in a serious accident, even if there is no obvious damage.


l Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury.


l Always make sure the shoulder belt passes through the guide when using the seat belt. Failure to properly position the belt may reduce the amount of protection in an accident and could lead to serious injures in a collision or sudden stop.


l Always make sure that the seat belt is not twisted, does not get caught in


the guide or the seatback and is arranged in the proper position.


n Using a seat belt comfort guide


l Make sure the belt is not twisted and that it lies flat. The elastic cord must


be behind the belt and the guide must be on the front.


l To reduce the chance of injury in case of an accident or a sudden stop while driving, remove and store the comfort guide in its pocket when it is not in use.


l Always make sure the shoulder belt is positioned across the center of the shoulder. The belt should be kept away from the neck, and should not fall off the shoulder. Failure to observe these precautions could reduce the effectiveness of the seat belt in an accident, causing death or serious injury.


61


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n Using a seat belt extender


l Do not wear the seat belt extender if you can fasten the seat belt without


the extender.


l Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or injury in the event of a collision.


l The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended.


NOTICE


n When using a seat belt extender


When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.


62


1


1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel


The steering wheel can be adjusted to a comfortable position.


STEP 1


STEP 2


STEP 3


the


Hold steering wheel and press the lever down. Adjust ideal to position by moving the steering wheel hori- zontally and vertically. Pull the lever up.


the


CAUTION


n Caution while driving


Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury.


n After adjusting the steering wheel


Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.


63


1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror


Glare from the headlights of vehicles behind can be reduced by using the following functions.


Manual anti-glare inside rear view mirror


Normal position Anti-glare position


Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.


Turns automatic mode on/off


START


The indicator comes on when automatic mode is turned on. Vehicles with smart key sys- tem: The mirror will revert to the automatic mode each time the “ENGINE STOP” switch is turned to IGNITION ON mode. Vehicles without smart key system: The mirror will revert to the automatic mode each time the engine switch is turned to “ON” position.


64


1-3. Adjustable components (seats, mirrors, steering wheel)


n To prevent sensor error


To ensure that the sensors operate prop- erly, do not touch or cover them.


CAUTION


n Caution while driving


Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.


65


1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors


Mirror angle can be adjusted using the switch.


STEP 1


Select a mirror to adjust.


Left Right


STEP 2


Adjust the mirror.


Up Right Down Left


n Mirror angle can be adjusted when


Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system The engine switch is in “ACC” or “ON” position.


n When the mirrors are fogged up (vehicles with mirror defoggers)


Turn on the mirror defoggers to defog the mirrors. (→P. 199)


66


1


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


n When driving the vehicle


Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. l Do not adjust the mirrors while driving. l Both the driver and passenger side mirrors must be properly adjusted


before driving.


n When the mirror defoggers are operating (if equipped)


Do not touch the surface of the mirror, as it may be hot.


67


1-4. Opening and closing the windows Power windows


The power windows can be opened and closed using the following switches.


Close One-touch close (driver’s window on some models only)* Opening One-touch open window only)*


(driver’s


*: Pressing


the switch


the opposite direction will stop win- dow travel partway.


in


Press the switch down to lock passenger window switches.


Use this switch to prevent chil- dren from accidentally opening or closing a passenger window.


Lock switch


68


1


1-4. Opening and closing the windows


n The power windows can be operated when


Vehicles with smart key system


The “ENGINE START STOP” switch is in IGNITION ON mode.


Vehicles without smart key system The engine switch is in “ON” position.


n Operating the power windows after turning the engine OFF


Vehicles with smart key system


The power windows can be operated for approximately 45 seconds after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned OFF. They cannot, however, be operated once either front door is opened.


Vehicles without smart key system


The power windows can be operated for approximately 45 seconds after the engine switch is turned to “ACC” or “LOCK” position. They cannot, however, be operated once either front door is opened.


n Jam protection function (vehicles with one-touch closing operation)


If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.


CAUTION


n Closing the windows


Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their body


in a position where it could be caught when a window is being operated.


l Do not allow children to operate the power windows.


Closing a power window on someone can cause serious injury, and in some instances, even death.


n Jam protection function (vehicles with one-touch closing operation)


l Never try jamming any part of your body to activate the jam protection


function intentionally.


l The jam protection function may not work if something gets caught just


before the window fully closes.


69


1-4. Opening and closing the windows Moon roof (if equipped)


Use the overhead switches to open, close, and tilt the moon roof up and down. n Opening and closing


Open The moon roof stops slightly before the fully open position. Push the switch again to fully open. Close Push the switch in either direc- tion to stop the moon roof part- way.


Tilt up Tilt down Push the switch in either direc- tion to stop the moon roof part- way.


n Tilt up and down


70


1


1-4. Opening and closing the windows


n The moon roof can be operated when


Vehicles with smart key system


The “ENGINE START STOP” switch is in IGNITION ON mode.


Vehicles without smart key system The engine switch is in “ON” position.


n Operating the moon roof after turning the engine OFF


Vehicles with smart key system


The moon roof can be operated for approximately 45 seconds after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned OFF. They cannot, however, be operated once either front door is opened.


Vehicles without smart key system


The moon roof can be operated for approximately 45 seconds after the engine switch is turned to “ACC” or “LOCK” position. It cannot, however, be operated once either front door is opened.


n Jam protection function


If an object is detected between the moon roof and the frame while closing or tilting down, travel is stopped and the moon roof opens slightly.


n To reduce wind noise


Drive with the moon roof opened to slightly before the fully open position as driving with the moon roof opened fully will cause wind noise.


n Sunshade


The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened.


n Moon roof open reminder function


Vehicles with smart key system


An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the “ENGINE START STOP” switch OFF.


Vehicles without smart key system


An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the engine switch OFF.


71


1-4. Opening and closing the windows


CAUTION


n Opening the moon roof


Observe the following precautions. Failing to do so may cause death or serious injury. l Do not allow any passengers to put their hands or heads outside the vehi-


cle while it is moving.


l Do not sit on top of the moon roof.


n Closing the moon roof


Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their bod- ies in a position where they could be caught when the moon roof is being operated.


l Do not allow children to operate the moon roof.


Closing the moon roof on someone can cause death or serious injury.


n Jam protection function


l Never try jamming any part of your body to activate the jam protection

Loading...
x