Download PDF Manual


Off


Off*2 or flashing*3
Deactivated


Activated


Front passenger knee airbag


Deactivated


Front passenger’s seat belt pretensioner


Activated


“AIR BAG ON” and “AIR BAG OFF”


indicator lights


“AIR BAG OFF”


SRS warning light


Seat belt reminder light


Off


Front passenger airbag


Deactivated


Devices


Side airbag


on the front passenger seat


Curtain shield airbag


in the front passenger side


Activated


Front passenger knee airbag


Deactivated


Front passenger’s seat belt pretensioner


Activated


AVALON (U)_(01999-07001)


1-1. For safe use


49


■ There is a malfunction in the system


Indicator/


warning light


“AIR BAG ON” and “AIR BAG OFF”


indicator lights


“AIR BAG OFF”


SRS warning light


Seat belt reminder light


On


Front passenger airbag


Deactivated


Devices


Side airbag


on the front passenger seat


Curtain shield airbag


in the front passenger side


Activated


Front passenger knee airbag


Deactivated


Front passenger’s seat belt pretensioner


Activated


*1: The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may not recognize him/ her as an adult depending on his/her physique and posture.


*2: In the event the front passenger is wearing a seat belt. *3: In the event the front passenger does not wear a seat belt *4: For some children, child in seat, child in booster seat or child in convertible seat, the system may not recognize him/her as a child. Factors which may affect this can be the physique or posture.


*5: Never install a rear-facing child restraint system on the front passenger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (P. 53)


*6: In case the indicator light is not illuminated, consult this manual on how to


install the child restraint system properly. (P. 57)


AVALON (U)_(01999-07001)


50


1-1. For safe use


WARNING


■Front passenger occupant classification system precautions


Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ●Wear the seat belt properly. ●Make sure the front passenger’s seat belt plate has not been left inserted


into the buckle before someone sits in the front passenger seat.


●Make sure the “AIR BAG OFF” indicator light is not illuminated when using the seat belt extender for the front passenger seat. If the “AIR BAG OFF” indicator light is illuminated, disconnect the extender tongue from the seat belt buckle, and reconnect the seat belt. Reconnect the seat belt extender after making sure the “AIR BAG ON” indicator light is illuminated. If you use the seat belt extender while the “AIR BAG OFF” indicator light is illumi- nated, the SRS airbags for the front passenger will not activate correctly, which could cause death or serious injury in the event of a collision.


●Do not apply a heavy load to the front passenger seat or equipment (e.g.


seatback pockets).


●Do not put weight on the front passenger seat by putting your hands or


feet on the front passenger seat seatback from the rear passenger seat.


●Do not let a rear passenger lift the front passenger seat with their feet or


press on the seatback with their legs.


●Do not put objects under the front passenger seat.


AVALON (U)_(01999-07001)


1-1. For safe use


51


WARNING


■Front passenger occupant classification system precautions


●Do not recline the front passenger seatback so far that it touches a rear seat. This may cause the “AIR BAG OFF” indicator light to be illuminated, which indicates that the SRS airbags for the front passenger will not deploy in the event of a severe accident. If the seatback touches the rear seat, return the seatback to a position where it does not touch the rear seat. Keep the front passenger seatback as upright as possible when the vehicle is moving. Reclining the seatback excessively may lessen the effectiveness of the seat belt system.


●If an adult sits in the front passenger seat, the “AIR BAG ON” indicator light is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask the passenger to sit up straight, well back in the seat, feet on the floor, and with the seat belt worn correctly. If the “AIR BAG OFF” indicator still remains illuminated, either ask the passenger to move to the rear seat, or if that is not possible, move the front passenger seat fully rearward.


●When it is unavoidable to install a forward-facing child restraint system on the front passenger seat, install the child restraint system on the front pas- senger seat in the proper order. (P. 57) ●Do not modify or remove the front seats. ●Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately.


●Child restraint systems installed on the rear seat should not contact the


front seatbacks.


●Do not use a seat accessory, such as a cushion and seat cover, that cov-


ers the seat cushion surface.


●Do not modify or replace the upholstery of the front seat.


AVALON (U)_(01999-07001)


52


1-1. For safe use


Safety information for children


Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.


● It is recommended that children sit in the rear seats to avoid acci-


dental contact with the shift lever, wiper switch etc.


● Use the rear door child-protector lock or the window lock switch to avoid children opening the door while driving or operating the power window accidentally.


● Do not let small children operate equipment which may catch or pinch body parts, such as the power window, hood, trunk, seats etc.


WARNING


Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure themselves by playing with the windows, the moon roof or other features of the vehicle. In addition, heat build-up or extremely cold temperatures inside the vehicle can be fatal to children.


AVALON (U)_(01999-07001)


1-1. For safe use


53


Child restraint systems


A child restraint system for a small child or baby must itself be properly restrained on the seat with the LATCH anchors or the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.


Points to remember Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat. ● Choose a child restraint system that suits your vehicle and is appro-


priate to the age and size of the child.


● For installation details, follow the instructions provided with the child


restraint system. General installation instructions are provided in this manual. (P. 57)


AVALON (U)_(01999-07001)


54


1-1. For safe use


Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child:  Rear facing  Infant seat/con-


 Forward facing  Convertible


vertible seat


seat


 Booster seat


■Selecting an appropriate child restraint system


●Use a child restraint system appropriate for the child until the child becomes


large enough to properly wear the vehicle’s seat belt.


●If the child is too large for a child restraint system, sit the child on a rear seat


and use the vehicle’s seat belt. (P. 28)


AVALON (U)_(01999-07001)


1


1-1. For safe use


55


WARNING


■Child restraint precautions


●For effective protection in automobile accidents and sudden stops, a child must be properly restrained, using a seat belt or child restraint system depending on the age and size of the child. Holding a child in your arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. ●Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.


●Never install a rear-facing child restraint system on the front passenger


seat even if the “AIR BAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front pas- senger airbag can cause death or serious injury to the child if the rear-fac- ing child restraint system is installed on the front passenger seat.


●A forward-facing child restraint system may be installed on the front pas- senger seat only when it is unavoidable. A child restraint system that requires a top tether strap should not be used in the front passenger seat since there is no top tether strap anchor for the front passenger seat. Adjust the seatback as upright as possible and always move the seat as far back as possible even if the “AIR BAG OFF” indicator light is illumi- nated, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously injured.


●Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of an accident.


●Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front and rear pillars or roof side rails from which the SRS side airbags or SRS curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the SRS side airbags and curtain shield airbags inflate, and the impact could cause death or serious injury to the child.


●Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop, sudden swerve or accident.


AVALON (U)_(01999-07001)


56


1-1. For safe use


WARNING


■When children are in the vehicle


Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.


■When the child restraint system is not in use


●Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the child restraint system unsecured in the pas- senger compartment.


●If it is necessary to detach the child restraint system, remove it from the vehicle or store it securely in the trunk. This will prevent it from injuring passengers in the event of a sudden stop, sudden swerve or accident.


AVALON (U)_(01999-07001)


1-1. For safe use


57


Installing child restraints


Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.


Child restraint LATCH anchors


LATCH anchors are provided for the outboard rear seats. (Buttons displaying the anchors are attached to the seats.)


location of


the


CTY11AX014


Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt) (P. 30)


Anchor brackets (for top tether strap)


An anchor bracket is provided for each rear seat.


AVALON (U)_(01999-07001)


58


1-1. For safe use


Installation with LATCH system


Adjust the head restraint to the downmost position. (P. 126) Widen the gap between the seat cushion and seatback slightly. Rear left seat only: Slide the rear center seat belt to the side to prevent from getting pinched in the lower anchor- age.


it


 Type A


the


onto


Latch the hooks of the lower straps LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.


Canada only


AVALON (U)_(01999-07001)


4


the buckles onto


 Type B the Latch LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.


1-1. For safe use


59


Canada only


AVALON (U)_(01999-07001)


60


1-1. For safe use


Installing child restraints using a seat belt (child restraint lock function belt) ■ Rear-facing  Infant seat/convertible seat


Place the child restraint sys- tem on the rear seat facing the rear of the vehicle.


Run the seat belt through the child restraint system and insert the buckle. Make sure that the belt is not twisted.


the plate


into


Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.


AVALON (U)_(01999-07001)


1-1. For safe use


61


rear seat, allow


While pushing the child restraint system down into the the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.


■ Forward-facing Convertible seat


Adjust the head restraint to the downmost position. (P. 126) Place the child restraint sys- tem on the seat facing the front of the vehicle.


Run the seat belt through the child restraint system and insert the buckle. Make sure that the belt is not twisted.


the plate


into


AVALON (U)_(01999-07001)


62


1-1. For safe use


Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.


retract until


While pushing the child restraint system into the rear seat, allow the shoulder belt to the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (P. 64)


AVALON (U)_(01999-07001)


1


■ Booster seat


1-1. For safe use


63


Place the child restraint sys- tem on the seat facing the front of the vehicle.


the plate


Sit the child in the child restraint system. Fit the seat belt to the child restraint sys- tem according to the manu- instructions and facturer’s insert the buckle. Make sure that the belt is not twisted. Check that the shoulder belt is correctly positioned over the child’s shoulder and that the lap belt is as low as possible. (P. 28)


into


Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt.


AVALON (U)_(01999-07001)


64


1-1. For safe use


Child restraint systems with a top tether strap


Adjust the head restraint to the downmost position. (P. 126) Secure the child restraint sys- tem using the seat belt or LATCH anchors.


Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.


■Laws and regulations pertaining to anchorages


The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819.


AVALON (U)_(01999-07001)


1-1. For safe use


65


WARNING


■When installing a booster seat


To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (P. 30)


■When installing a child restraint system


Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of a sudden braking or an accident. ●If the driver’s seat interferes with the child restraint system and prevents it from being attached correctly, attach the child restraint system to the right-hand rear seat.


●Adjust the front passenger seat so that it does not interfere with the child restraint system.


●Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint system on the front pas- senger seat, move the seat as far back as possible even if the “AIR BAG OFF” indicator light is illuminated. Failure to do so may result in death or serious injury if the airbags deploy (inflate).


AVALON (U)_(01999-07001)


66


1-1. For safe use


WARNING


■When installing a child restraint system


●When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder. Failing to do so may result in death or serious injury in the event of an accident or a sudden braking.


●Ensure that the belt and plate are securely locked and the seat belt is not


twisted.


●Shake the child restraint system left and right, and forward and backward


to ensure that it has been securely installed.


●After securing a child restraint system, never adjust the seat. ●Follow all installation instructions provided by the child restraint system


manufacturer.


●When securing some types of child restraint systems in rear seats, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effectiveness. Be sure your seat belt fits snugly across your shoulder and low on your hips. If it does not, or if it interferes with the child restraint, move to a different position. Failure to do so may result in death or serious injury.


■Do not use a seat belt extender


If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of a sud- den braking, sudden swerving or an accident.


■To correctly attach a child restraint system to the anchors


When using the LATCH anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system. Make sure the child restraint system is securely attached, or it may cause death or serious injury to the child or other passengers in the event of a sudden braking or an accident.


AVALON (U)_(01999-07001)


1-1. For safe use


67


Exhaust gas precautions


Harmful substance to the human body is included in exhaust gases if inhaled.


WARNING


Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases to enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard. ■Important points while driving


●Keep the trunk lid closed. ●If you smell exhaust gases in the vehicle even when the trunk lid is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible.


■When parking


●If the vehicle is in a poorly ventilated area or a closed area, such as a


garage, stop the engine.


●Do not leave the vehicle with the engine on for a long time.


If such a situation cannot be avoided, park the vehicle in an open space and ensure that exhaust fumes do not enter the vehicle interior.


●Do not leave the engine running in an area with snow build-up, or where it is snowing. If snowbanks build up around the vehicle while the engine is running, exhaust gases may collect and enter the vehicle.


■Exhaust pipe


The exhaust system needs to be checked periodically. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer.


AVALON (U)_(01999-07001)


68


1-2. Theft deterrent system


Engine immobilizer system


The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.


The indicator light flashes after the engine switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the engine switch has been turned to ACCESSORY or IGNI- TION ON mode to indicate that the system has been canceled.


■System maintenance


The vehicle has a maintenance-free type engine immobilizer system.


■Conditions that may cause the system to malfunction


●If the grip portion of the key is in contact with a metallic object ●If the key is in close proximity to or touching a key to the security system


(key with a built-in transponder chip) of another vehicle


AVALON (U)_(01999-07001)


1-2. Theft deterrent system


69


■Certifications for the engine immobilizer system


 For vehicles sold in the U.S.A. FCC ID: NI4TMIMB-3
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.  For vehicles sold in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.


WARNING


■Certifications for the engine immobilizer system


Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.


NOTICE


■To ensure the system operates correctly


Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.


AVALON (U)_(01999-07001)


70


1-2. Theft deterrent system


Alarm


The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door or trunk is unlocked or opened in any way other than using the entry function, wireless remote control or mechanical key.


● The hood is opened. ● Some models: The window is tapped or broken.


Setting the alarm system Close the doors, trunk and hood, and lock all the doors. The system will be set automatically after 30
seconds.


The indicator light changes from being on to flashing when the sys- tem is set.


Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarms: ● Unlock the doors or open the trunk. ● Turn the engine switch to ACCESSORY or IGNITION ON mode, or start the engine. (The alarm will be deactivated or stopped after a few seconds.)


AVALON (U)_(01999-07001)


1-2. Theft deterrent system


71


■System maintenance


The vehicle has a maintenance-free type alarm system.


■Items to check before locking the vehicle


To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ●Nobody is in the vehicle. ●The windows and moon roof are closed before the alarm is set. ●No valuables or other personal items are left in the vehicle.


■Triggering of the alarm


The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ●A person inside the vehicle opens a


door, the trunk or hood.


●The battery is recharged or replaced


when the vehicle is locked.


■Alarm-operated door lock


●When the alarm is operating, the doors are locked automatically to prevent


intruders.


●Do not leave the key inside the vehicle when the alarm is operating, and make sure the key is not inside the vehicle when recharging or replacing the battery.


NOTICE


■To ensure the system operates correctly


Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.


AVALON (U)_(01999-07001)


72


1-2. Theft deterrent system


Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recov- ery of parts from stolen vehicles. Do not remove under penalty of law.


AVALON (U)_(01999-07001)


Instrument cluster


2.


73


Instrument cluster Warning lights and indicators .......................... 74
Gauges and meters ............ 79
Multi-information display ..... 82
Fuel consumption information ........................ 89


AVALON (U)_(01999-07001)


74


2. Instrument cluster


Warning lights and indicators


The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.


The units used on the speedometer and some indicators may differ depending on where the vehicle is sold.


AVALON (U)_(01999-07001)


2. Instrument cluster


75


Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems.


Brake system warning light (P. 386)


*1


Slip indicator (P. 388)


Brake system warning light (P. 386)


Open door warning light (P. 388)


*1 Charging system warn-


ing light (P. 386)


Low fuel level warning light (P. 388)


Malfunction lamp (P. 386)


indicator


Seat belt reminder light (P. 388)


*1


(U.S.A.) *1


(Canada)


*1


(U.S.A.) *1


(Canada)


*1


Low engine oil pressure warning light (P. 386)


*1 Electric power steering


system warning light (P. 387)


*1, 2, 3


*2, 4


PCS warning light (P. 387)


LDA (Lane Departure Alert with steering con- trol) indicator (P. 388)


Malfunction lamp (P. 386)


indicator


*1 SRS warning light


(P. 387)


*1


(U.S.A.) *1


(Canada)


ABS warning light (P. 387)


ABS warning light (P. 387)


AVALON (U)_(01999-07001)


76


2. Instrument cluster


*1


Tire pressure warning light (P. 389)


*1 Master warning light


(P. 389)


*1: These lights turn on when the engine switch is turned to IGNITION ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a mal- function in a system if the light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer.


*2: If equipped *3: The light flashes to indicate a malfunction. *4: This light illuminates on the multi-information display.


AVALON (U)_(01999-07001)


2. Instrument cluster


77


Indicators The indicators inform the driver of the operating state of the vehicle’s various systems.


Turn signal indicator (P. 169)


*1, 2


Slip indicator (P. 249)


Headlight indicator (P. 171)


Tail light indicator (P. 171)


(U.S.A.)


(Canada)


*1 VSC OFF indicator


(P. 250)


*1, 3


AIR BAG


“AIR BAG ON/OFF” indi- cator (P. 46)


Headlight high beam indicator (P. 171)


*5 Cruise control set indica-


tor (P. 220, 233)


*3 Security indicator


(P. 68, 70)


*4, 5 Radar cruise control


indicator (P. 220)


*1 Eco Driving Light (P. 81)


Indicator


*4, 5 Cruise control indicator


(P. 233)


*4 Automatic high beam


indicator (P. 174)


*1, 4, 6 PCS warning light


(P. 200)


Eco drive mode indicator (P. 246)


*4, 5


LDA (Lane Departure Alert with steering con- trol) indicator (P. 209)


Sport mode indicator (P. 246)


AVALON (U)_(01999-07001)


78


2. Instrument cluster


*1: These lights turn on when the engine switch is turned to IGNITION ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a mal- function in a system if the light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer.


*2: The light flashes to indicate that the system is operating. *3: This light illuminates on the center panel. *4: If equipped *5: This light illuminates on the multi-information display. *6: The light turns on when the system is off.


WARNING


■If a safety system warning light does not come on


Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.


AVALON (U)_(01999-07001)


Gauges and meters


2. Instrument cluster


79


The units used on the speedometer may differ depending on where the vehicle is sold. Tachometer Displays the engine speed in revolutions per minute Multi-information display Presents the driver with a variety of driving-related data (P. 82) Speedometer Displays the vehicle speed Fuel gauge Displays the quantity of fuel remaining in the tank Trip meter reset knob/instrument panel light control knob P. 80
Odometer and trip meter display Odometer: Displays the total distance the vehicle has been driven Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Shift position and shift range Displays the selected shift position or selected shift range (P. 165) Engine coolant temperature gauge Displays the engine coolant temperature


AVALON (U)_(01999-07001)


80


2. Instrument cluster


Changing the trip meter display Switches between trip meter “A” and “B” displays. When the trip meter is displayed, pressing and holding the knob will reset the trip meter.


Instrument panel light control The brightness of the instrument panel lights can be adjusted.


Darker Brighter


AVALON (U)_(01999-07001)


■Eco-friendly driving


(Eco During Eco-friendly acceleration driving), Eco Driving Indicator Light will turn on. If the acceleration exceeds the Eco driving accelerator upper limit, or the vehicle is stopped, the light turns off. Eco Driving Indicator Light will not operate in the following conditions: ●The shift lever is in anything other than


D.


●The paddle shift switch is used. ●The vehicle is in sport mode. ●The vehicle speed is approximately 80


mph (130 km/h) or higher.


2. Instrument cluster


81


■The meters and display illuminate when


The engine switch is in IGNITION ON mode.


■The brightness of the instrument panel lights


●When the headlight switch is turned to on, the brightness will be reduced


slightly unless the control knob is turned fully clockwise.


●When the knob is turned fully clockwise, the display audio/navigation sys- tem screen will always be in day mode regardless of the headlight switch position.


■Customization


Theinstrument panel light auto dimmer control can be changed. (Customizable feature: P. 449)


NOTICE


■To prevent damage to the engine and its components


●Do not let the indicator needle of the tachometer enter the red zone, which


indicates the maximum engine speed.


●The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 417)


AVALON (U)_(01999-07001)


82


2. Instrument cluster


Multi-information display


Display contents The multi-information display presents the driver with a variety of driv- ing-related data. ● Trip information (P. 83)


Displays the following items: • Distance to empty • Average fuel economy • Current fuel economy • ECO Drive Level • Turn-by-turn


navigation (vehicles with a navigation system)


● Settings (P. 85) ● Warning messages and reminder messages (P. 394) ● Automatically displayed when a malfunction occurs in one of the vehicle’s systems or when a reminder message is required. The display returns to the previous screen by pressing the “DISP” but- ton. (P. 83)


● Cruise control display (if equipped) (P. 233) ● Dynamic radar cruise control display (if equipped) (P. 220) ● LDA (Lane Departure Alert with steering control) display (if


equipped) (P. 209)


● PCS (Pre-Collision System) display (if equipped) (P. 196) ● Tire pressure warning system display (P. 341)


AVALON (U)_(01999-07001)


Trip information ■ Switching the display


displayed


Items can switched by pressing “DISP” button.


be the


■ Distance to empty


2. Instrument cluster


83


Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.


• When only a small amount of fuel is added to the tank, the display may


not be updated. When refueling, turn the engine switch off. If the vehicle is refueled with- out turning the engine switch off, the display may not be updated.


■ Digital speedometer


Displays the current vehicle speed.


■ Average fuel economy


Displays the average fuel consumption since the function was reset. • The function can be reset by pressing and holding the “DISP” button


when the average fuel consumption is displayed.


• Use the displayed average fuel consumption as a reference.


■ Current fuel economy


Displays the current rate of fuel consumption.


AVALON (U)_(01999-07001)


84


2. Instrument cluster


■ ECO Drive Level


level


Suggests Eco driving based on acceleration.


All green suggests the status of the most Eco-friendly driv- ing. All blue suggests the status of the least Eco-friendly driv- ing.


■ Sway warning (if equipped)


Detects the sway of the vehicle within a lane, which is often associ- ated with a decrease in the driver’s attention level, and displays the decrease in attention using a segment display. The fewer segments lit, the more the driver may need to rest.


This display is a part of the LDA (Lane Departure Alert with steering control) system. The display is enabled when the operating conditions of the vehicle sway warning are met. (P. 209)


■ Turn-by-turn navigation (vehicles with a navigation system)


Displays information from the navigation system about the next turn on the guidance route.


AVALON (U)_(01999-07001)


Setting up the displays ◆ Customizable items ■ Meter settings


Item


Digital Speed


Units (vehicles without a navigation system)


Turn-by-Turn (vehicles with a navigation system)


ECO Indicator


Settings


ON OFF English Metric ON OFF OFF ON


2. Instrument cluster


85


Details


Select to enable/disable the digital speedometer.


Select to change the units of mea- sure displayed.


Select to enable/disable the Turn- by-turn navigation.


Select to enable/disable the Eco Driving Indicator Light.



LDA (Lane Departure Alert with steering control) (if


equipped) (P. 209) The following LDA system settings can be changed:


Item


Steering Assist


Settings


ON OFF


Details


Select to enable/disable steering wheel assistance.


Standard Select to set the warning sensitiv-


ity.


High ON OFF


Standard


Low High


Select to enable/disable the vehi- cle sway warning.


Select to set the vehicle sway warning sensitivity.


Sensitivity


Alert


Sensitivity


AVALON (U)_(01999-07001)


86


2. Instrument cluster


◆ Changing the settings


While the vehicle is stopped, press the “DISP” button until the screen appears.


“Settings”


Press and hold the “DISP” button while the “Settings” screen is displayed.


Press the “DISP” button to highlight the desired item.


Press and hold the “DISP” button to change the setting.


AVALON (U)_(01999-07001)


5


the


“EXIT”


To exit the “Settings” screen, press “DISP” button repeatedly until is highlighted and then press and hold the “DISP” button. If the Lane Departure settings screen is displayed, press the “DISP” button repeatedly until “RETURN” is highlighted, then press and hold “DISP” switch to return to the “Settings” screen. The display goes back to step


the


2. Instrument cluster


87


■System check display


After turning the engine switch to IGNITION ON mode, “SYSTEM CHECK” is displayed while system operation is checked.


■Trip summary display


When the engine is turned off, drive infor- mation data since the engine was started is displayed for 3 seconds.


■Setting display automatic cancelation


In the following situations, setting display in which the settings can be changed through the “DISP” button will automatically be turned off. ●When a warning message appears while the setting display is displayed ●When the vehicle begins to move while the setting display is displayed


■Tire inflation pressure


●It may take a few minutes to display the tire inflation pressure after the engine switch is turned to IGNITION ON mode. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted


●“---” may be displayed if the tire information cannot be determined due to


unfavorable radio wave conditions.


●Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.


AVALON (U)_(01999-07001)


88


2. Instrument cluster


■Liquid crystal display


Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.


WARNING


■The information display at low temperatures


Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to down- shift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.


■Cautions during setting up the display


As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.


NOTICE


■During setting up the display


To prevent battery discharge, ensure that the engine is running while setting up the display features.


AVALON (U)_(01999-07001)


2. Instrument cluster


89


Fuel consumption information Fuel consumption information can be displayed on the audio system screen.


Audio system


Trip information Press “APPS” button and select “Eco” to display the “Trip Informa- tion” screen.


If the “Trip Information” screen does not appear, select “Trip Information”.


Average vehicle speed Elapsed time Range Previous fuel consumption per minute Current fuel consumption Reset the trip information data “Past Record” screen appears


These images are examples only, and may vary slightly from actual conditions.


AVALON (U)_(01999-07001)


90


2. Instrument cluster


Past record Press “APPS” button and select “Eco” to display the “Past Record” screen.


If the “Past Record” screen does not appear, select “Past Record”. Previous fuel economy record Current fuel economy Best recorded fuel economy Update the past record data Reset the past record data “Trip appears Average recorded fuel economy These images are examples only, and may vary slightly from actual conditions.


Information”


screen


■Updating the past record data


Selecting “Update” on the “Past Record” screen will update the past record data.


■Resetting the data


Selecting “Clear” on the consumption screen will reset the consumption data. Selecting “Clear” on the “Past Record” screen will reset the past record data.


■Customization


The touch button sensitivity can be changed. (Customizable features: P. 449)


AVALON (U)_(01999-07001)


Operation of each component


91


3-1. Key information


Keys .................................... 92


3-2. Opening, closing and


locking the doors Doors .................................. 97
Trunk................................. 103
Smart key system ............. 108


3-3. Adjusting the seats


Front seats ........................ 119
Driving position memory........................... 121
Head restraints.................. 126


3-4. Adjusting the steering


wheel and mirrors Steering wheel .................. 128
Inside rear view mirror ...... 130
Outside rear view mirrors............................. 132


3-5. Opening, closing the windows and moon roof Power windows ................. 135
Moon roof.......................... 138


AVALON (U)_(01999-07001)


92


3-1. Key information


Keys


The keys The following keys are provided with the vehicle.


Electronic keys • Operating the smart key system


(P. 108)


• Operating the wireless remote


control function Mechanical keys Key number plate


Wireless remote control


Locks all the doors (P. 97) Unlocks all the doors (P. 97) Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors. Unlocks the trunk (press and hold) (P. 103) Sounds the alarm (press and hold) (P. 93)


AVALON (U)_(01999-07001)


3-1. Key information


93


Using the mechanical key To take out the mechanical key, push the release button and take the key out.


The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re-

Loading...
x