n Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
223
AVALON_U_OM41430U
3-2. Using the audio system
n MP3 and WMA files
MP3 (MPEG Audio LAYER 3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size by using
MP3 compression.
WMA (Windows Media TMAudio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
There is a limit to the MP3 and WMA file standards and to the media/formats
recorded by them that can be used.
l MP3 file compatibility
• Compatible standards
MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)
• Compatible sampling frequencies
MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)
• Compatible bit rates
MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) • MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps) *: Compatible with VBR • Compatible channel modes: stereo, joint stereo, dual channel and
monaural
l WMA file compatibility
• Compatible standards
WMA Ver. 7, 8, 9
• Compatible sampling frequencies
32, 44.1, 48 (kHz)
• Compatible bit rates
Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps) *: Only compatible with 2-channel playback
l Compatible media
Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
224
AVALON_U_OM41430U
3-2. Using the audio system
l Compatible disc formats
The following disc formats can be used.
• Disc formats: CD-ROM Mode 1 and Mode 2
CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 level 1, level 2, (Romeo, Joliet)
MP3 and WMA files written in any format other than those listed above
may not play correctly, and their file names and folder names may not be
displayed correctly.
Items related to standards and limitations are as follows:
• Maximum directory hierarchy: 8 levels
• Maximum length of folder names/file names: 32 characters
• Maximum number of folders: 192 (including the root)
• Maximum number of files per disc: 255
l File names
The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.
l Multi-sessions
As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played. ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.
225
AVALON_U_OM41430U
3-2. Using the audio system
l MP3 and WMA playback
When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnec- essary folders. Discs that contain a mixture of music data and MP3 or WMA format data cannot be played.
l Extensions
If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
l Playback
• To play MP3 files with steady sound quality, we recommend a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc. • There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encod- ing and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all. • When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all. • Microsoft, Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S. and other countries.
226
AVALON_U_OM41430U
3-2. Using the audio system
n CD-R and CD-RW discs
l CD-R/CD-RW discs that have not been subject to the “finalizing process” (a process that allows discs to be played on a conventional CD player) cannot be played. It may not be possible to play CD-R/CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of the unit. It may not be possible to play discs recorded on a personal computer depending on the application settings and the environment. Record with the correct format. (For details, contact the appropriate application manu- facturers of the applications.)
l CD-R/CD-RW discs may be damaged by direct exposure to sunlight, high temperatures or other storage conditions. The unit may be unable to play damaged discs. If you insert a CD-RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD-R disc.
l Recordings on CD-R/CD-RW cannot be played using the DDCD (Double
Density CD) system.
n Unsuitable discs, and player precautions
→P. 218
227
AVALON_U_OM41430U
3-2. Using the audio system Optimal use of the audio system
Displays the current mode Changes the following set- ting • Sound quality and vol-
ume balance (→P. 229)
The sound quality and bal- ance setting can be changed to produce the best sound. • Automatic Sound Level-
izer ON/OFF (→P. 229)
Using the AUDIO CONTROL function
n Changing sound quality modes
selects the mode to be change in the following
Pressing order. “BAS” → “MID”* → “TRE” → “FAD” → “BAL” → “SURROUND”* → “ASL” *: If equipped
228
AVALON_U_OM41430U
3-2. Using the audio system
n Adjusting sound quality
Turning
adjust the level.
Sound quality
mode Bass*
Level
Turn to the left Turn to the right
-5 to 5
Mid-range*
-5 to 5
Low
High
Treble* Front/rear volume balance Left/right volume balance
-5 to 5
F7 to R7
Shifts to rear
Shifts to front
L7 to R7
Shifts to left
Shifts to right
Surround
ON/OFF
OFF
ON
Mode displayed
“BAS” “MID” (if
equipped)
“TRE”
“FAD”
“BAL”
“SUR- ROUND”
(if
mode.
equipped) *: The sound quality level is adjusted individually in each radio mode or CD
n Adjusting the Automatic Sound Levelizer (ASL)
When ASL is selected, turning
to the right turns on the ASL,
and turning
to the left turns off the ASL.
ASL automatically the volume and tone quality according to the vehicle speed.
229
AVALON_U_OM41430U
3-2. Using the audio system Using the AUX adapter
This adapter can be used to connect a portable audio device and lis- ten to it using the vehicle’s speakers.
STEP 1
Connect the portable audio device.
STEP 2
Press
n Operating portable audio devices connected to the audio system
The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio device itself.
230
AVALON_U_OM41430U
3-2. Using the audio system Using the steering wheel audio switches
Some audio features can be controlled using the switches on the steering wheel.
Volume Radio: Select radio stations files CD: Select (MP3 and WMA) and discs
tracks,
Power on, select audio source
Turning on the power
Press
when the audio system is turned off.
The audio system can be turned off by holding the switch down for 1 sec- ond or more.
Changing the audio source
Press when the audio system is turned on. The audio source changes as follows each time the button is pressed. If a CD is not inserted, that mode will be skipped.
“FM1” → “FM2” → “CD player” → “AUX” → “AM” → “SAT1” → “SAT2” → “SAT3”
231
AVALON_U_OM41430U
3-2. Using the audio system
Adjusting the volume
Press “+” on volume.
to increase the volume and “-” to decrease the
Press and hold the button to continue increasing or decreasing the vol- ume.
Selecting a radio station
STEP 1
STEP 2
to select the radio mode.
Press Press “∧” or “∨” on To scan for receivable stations, press and hold the button until you hear a beep.
to select a radio station.
Selecting a track/file
STEP 1
STEP 2
Press Press “∧” or “∨” on
to select the CD mode.
to select the desired track/file.
Selecting a disc in the CD player
Press Press and hold “∧” or “∨” on
to select the CD mode.
until you hear a beep.
STEP 1
STEP 2
232
AVALON_U_OM41430U
3-2. Using the audio system
n Canceling automatic selection of a radio station
Push the same switch.
CAUTION
n To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.
233
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone) Hands-free system (for cellular phone) (if equipped)
This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Title
Using the hands-free system Making a phone call Setting a cellular phone Security and system setup Using the phone book
Page
P. 237
P. 245
P. 250
P. 255
P. 258
n Conditions under which the system will not operate
If using a cellular phone that does not support Bluetooth®. If the cellular phone is switched off. If you are outside service range. If the cellular phone is not connected. If the cellular phone’s battery is low.
n When transferring ownership of the vehicle
Be sure to initialize the system to prevent the personal data from being improperly accessed.
n About Bluetooth®
Bluetooth is a registered trademark of Bluetooth SIG. Inc.
234
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
n Compatible models
Compatible with HFP (Hands Free Profile) Ver. 1.0 and OPP (Object Push Profile) Ver. 1.1. If your cellular phone does not support HFP, you cannot enter the Bluetooth® phone, and take OPP service individually. n Certification for the hands-free system
FCC ID: HYQBTAU01A IC ID: 1551A-BTAU01A MADE IN JAPAN
NOTE: This device complies with Part 15 of the FCC Rules and RSS-210. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Connect the equipment into an outlet on a circuit different from that to
Increase the separation between the equipment and receiver.
which the receiver is connected.
l Consult the dealer or an experienced radio/TV technician for help.
235
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth, for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive expo- sure evaluation (MPE). But it is desirable that it should be installed and oper- ated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
CAUTION
n While driving
Do not use a cellular phone, or connect the Bluetooth® phone.
NOTICE
n To prevent damage to a cellular phone
Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.
236
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone) Using the hands-free system
n Audio unit
Displays such items as message, name, and phone number
Lower-case characters and special characters, such as an umlaut, cannot be dis- played.
Displays Bluetooth® con- nection condition
If “BT” is not displayed, the hands-free system cannot be used.
Displays the reception level Selects speed dials Push and hold: Displays information that is too long to be displayed at one time on the display Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item
237
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
n Steering wheel
n Microphone
Volume End call Sending/Receiving Press: Voice command sys- tem on Press and hold: Voice com- mand system off
238
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Operating the system by using a voice command
By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands-
free system without checking the display or operating
n Operation procedure
and say a command for a desired function.
Press (→P. 241)
n Auxiliary commands
The following auxiliary commands can be used: Cancel: Exits the hands-free system Go back: Returns to the previous procedure
239
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Using the hands-free system for the first time Before using the hands-free system, it is necessary to register a cel- lular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone:
STEP 1
Press
or
The introductory guidance and phone name registration instructions
are heard.
STEP 2
Register a phone name by either of the following methods.
a. Select “Record Name” by using
, and say a name to
be registered.
b. Press
and say a name to be registered.
Voice guidance instruction to confirm the input is heard.
STEP 3
Press
and say “Confirm”, or select “Confirm” by using
A passkey is displayed and heard, and voice guidance instruction for
inputting the passkey into the cellular phone is heard.
STEP 4
Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.
Guidance for registration completion is heard.
240
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Menu list of the hands-free system
n Normal operation
First menu
Callback
Redial
Dial by number Dial by name
Phone- book
Second menu
Third menu
Operation detail
⎯
⎯
⎯
⎯
Add Entry Change Name Delete Entry Delete Speed Dial (Delete Spd Dial) List Names Set Speed Dial (Set Spd Dial)
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Dialing a number stored in the incoming history memory Dialing a number stored in the outgoing history memory
Dialing by inputting a number
Dialing by inputting a name registered in the phone book Adding a new number Changing a name in the phone book Deleting the phone book data
Deleting a registered speed dial
List the phone book data
Registering speed dial
241
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
First menu
Second menu
Third menu
Operation detail
Security
Setup
Phone Setup
System Setup
Set PIN Phonebook Lock Phonebook Unlock
Pair Phone
Change Name
Delete
List phones
Select phone
Set Passkey Guidance Volume (Guidance Vol) Initialize
Setting a PIN code Locking the phone book
Unlocking the phone book
Registering a cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey
Setting voice guidance volume
Initialization
242
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
n Using a short cut key
First menu
Dial “XXX (name)”
Phone book add entry Phone book change name Phone book delete entry Phone book set speed dial Phone book delete speed dial
Phonebook
Second menu
⎯
⎯
⎯
⎯
⎯
⎯
Operation detail
Dialing a number registered in the phone book
Adding a new number
Changing a name of a phone number in the phone book
Deleting phone book data
Registering speed dial
Deleting speed dial
Phonebook Unlock Phonebook Lock
Unlocking the phone book Locking the phone book
243
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
n Automatic adjustment of volume
When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.
n When using a voice command
l For numbers, say a combination of single digits from zero to nine, #
(pound), ∗ (star), and + (plus).
l Say a command correctly and clearly.
n The system may not recognize your voice in the following situations:
l When driving on unsealed roads l When driving at high speeds
If the window is open If the air conditioning is blowing directly on the microphone If the air conditioning is set too high
n The following cannot be performed while driving:
l Operating the system with
l Registering a cellular phone to the system
n Changing the passkey
→P. 254
244
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone) Making a phone call
n Making a phone call
l Dialing by inputting a number
1. “Dial by number”
l Dialing by inputting a name
1. “Dial by name”
l Speed dialing l Dialing a number stored in the outgoing history memory
1. “Redial”
l Dialing a number stored in the incoming history memory
1. “Call back”
n Receiving a phone call l Answering the phone l Refusing the call n Transferring a call n Using a call history memory
l Dialing l Storing data in the phone book l Deleting
Dialing by inputting a number
STEP 1
Press
and say “Dial by number”.
STEP 2
Press
and say the phone number.
245
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
STEP 3
Dial by one of the following methods:
a. Press
b. Press
and say “Dial”.
c. Select “Dial” by using
Dialing by inputting a name
STEP 1
Press
and say “Dial by name”.
STEP 2
Select a registered name to be input by either of the following methods:
a. Press
and say a registered name.
b. Press
and say “List names”. Press
while the
desired name is being read aloud. Dial by one of the following methods:
STEP 3
a. Press
b. Press
and say “Dial”.
c. Select “Dial” by using
246
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Speed dialing
STEP 1
STEP 2
Press Press the preset button in which the desired number is regis- tered.
STEP 3
Press
When receiving a phone call
n Answering the phone
Press
n Refusing the call
Press
247
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:
a. Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the oper- ation of the phone.
b. Press
*1.
c. Press
and say “Call Transfer” *2.
*1: This operation can be performed only when transferring a call
from the cellular phone to the system during a call.
*2: While the vehicle is in motion, a call cannot be transferred from
the system to the cellular phone.
Using a call history memory Follow the procedure below to use number stored in call history memory:
STEP 1
STEP 2
Press and say “Redial” (when using a number stored in the outgoing history memory) or “Callback” (when using a number stored in the incoming history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is
displayed.
b. Select the desired number by using
248
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
The following operations can be performed:
Dialing: Press
or select “Dial” by using a voice command
or
Storing the number in the phone book: Select “Store” by using a
voice command or
Deleting: Select “Delete” by using a voice command or
n Call history
Up to 5 numbers can be stored in each of the outgoing and incoming history memories.
n When talking on the phone
l Do not talk simultaneously with the other party. l Keep the volume of the receiving voice down. Otherwise, voice echo will
increase.
249
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone) Setting a cellular phone
Registering a cellular phone in the hands-free system allows the system to function. The following function can be used for regis- tered cellular phones: n Functions and operation procedures
To enter menu for each function, follow the steps below by using
a voice command or
l Registering a cellular phone
1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”
l Selecting a cellular phone to be used
1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”
l Changing a registered name
1. “Setup” → 2. “Phone Setup” → 3. “Change Name”
l Listing the registered cellular phones
1. “Setup” → 2. “Phone Setup” → 3. “List Phones”
l Deleting a cellular phone
1. “Setup” → 2. “Phone Setup” → 3. “Delete”
l Changing the passkey
1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”
Registering a cellular phone
Select “Pair Phone” by using a voice command or
, and do the
procedure for registering a cellular phone. (→P. 240)
250
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Selecting a cellular phone to be used
STEP 1
Select “Select Phone” by using a voice command or
Pattern A
STEP 2
Select a cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or
a. Press
and say the desired phone name.
b. Press
and say “List phones”. While the name of the
desired cellular phone is being read aloud, press
Pattern B
STEP 2
Select a cellular phone to be used by using
251
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Changing a registered name
STEP 1
Select “Change Name” by using a voice command or
STEP 2
Select a name of cellular phone to be changed by either of the following methods:
a. Press
and say the desired phone name, and select
“Confirm” by using a voice command or
b. Press
and say “List phones”. While the desired
phone name is being read aloud, press
c. Select the desired phone name by using
STEP 3
Press
or select “Record Name” by using
, and
say a new name.
STEP 4
Select “Confirm” by using a voice command or
Listing the registered cellular phones
Selecting “List Phones” by using a voice command or
begins
reading aloud the list of the registered cellular phones. When listing is complete, the system returns to “Phone Setup”.
252
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
while a name of cellular phone is being read selects
Pressing the cellular phone, and the following functions will be available: l Selecting a cellular phone: “Select Phone” l Changing a registered name: “Change Name” l Deleting a cellular phone: “Delete”
Deleting a cellular phone
STEP 1
Select “Delete” by using a voice command or
Pattern A
STEP 2
Select a cellular phone to be deleted by either of the following methods and select “Confirm” by using a voice command or
a. Press phone.
and say the name of the desired cellular
b. Press
and say “List phones”. While the name of the
desired cellular phone is being read aloud, press
Pattern B
STEP 2
Select a desired cellular phone to be deleted by using
253
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Changing the passkey
STEP 1
Select “Set Passkey” by using a voice command or
Pattern A
STEP 2
Press
, say a four to eight-digit number, and select
“Confirm” by using a voice command or
Pattern B
STEP 2
Select a four to eight-digit number by using
The number should be input one digit at a time. When the entire number to be registered as a passkey has
STEP 3
been input, press
again.
n The number of cellular phone that can be registered Up to 6 cellular phones can be registered in the system.
254
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone) Security and system setup
To enter the menu of each setting, follow the steps below: n Security setting items and operation procedure
l Setting or changing the PIN (Personal Identification Number)
1. “Setup” → 2. “Security” → 3. “Set PIN”
l Locking the phone book
1. “Setup” → 2. “Security” → 3. “Phonebook Lock”
l Unlocking the phone book
1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”
n System setup items and operation procedure
l Setting voice guidance volume
1. “Setup” → 2. “System Setup” → 3. “Guidance Vol” Initialization 1. “Setup” → 2. “System Setup” → 3. “Initialize”
can only be used for system setup operation.
Setting or changing the PIN
n Setting a PIN
STEP 1
Select “Set PIN” by using a voice command or
STEP 2
Enter a PIN by using a voice command or
When using
, input the code one digit at a time.
255
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
n Changing the PIN
STEP 1
Select “Set PIN” by using a voice command or
STEP 2
Enter the registered PIN by using a voice command or
STEP 3
Enter a new PIN by using a voice command or
When using
, input the code one digit at a time.
Locking or unlocking the phone book
STEP 1
Select “Phonebook Lock (Phbk Lock)” or “Phonebook Unlock
(Phbk Unlock)” by using a voice command or
STEP 2
Input the PIN by either of the following methods and select
“Confirm” by using a voice command or
a. Press
and say the registered PIN.
b. Input a new PIN by using
256
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Setting voice guidance volume
STEP 1
Select “Guidance Vol” by using
STEP 2
Change the voice guidance volume.
To decrease the volume: Turn
counterclockwise.
To increase the volume: Turn
clockwise.
Initialization
STEP 1
Select “Initialize” and then “Confirm” by using
STEP 2
Select “Confirm” by using a voice command or
again.
n Initialization
l The following data in the system can be initialized:
• Phone book • Outgoing and incoming history • Speed dial • Registered cellular phone data • Security code
l Once the initialization has been completed, the data cannot be restored
to its original state.
n When the phone book is locked
The following functions cannot be used: l Dialing by inputting a name l Speed dialing l Dialing a number stored in the call history memory l Using the phone book
257
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone) Using the phone book
To enter the menu of each setting, follow the steps below:
l Adding a new phone number
1. “Phonebook” → 2. “Add Entry”
l Setting speed dial
1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”
l Changing a registered name
1. “Phonebook” → 2. “Change Name”
l Deleting registered data
1. “Phonebook” → 2. “Delete Entry”
l Deleting speed dial
1. “Phonebook” → 2. “Delete Speed Dial (Delete Spd Dial)”
l Listing the registered data
1. “Phonebook” → 2. “List Names”
Adding a new phone number The following methods can be used to add a new phone number: l Transferring data from the cellular phone
Inputting a phone number by using a voice command
Inputting a phone number by using
l Selecting a phone number from outgoing or incoming history
258
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
n Adding procedure
STEP 1
Select “Add Entry” by using a voice command or
STEP 2
Use one of the following methods to input a telephone num- ber:
Inputting a telephone number by using a voice command
STEP2-1 Select “By Voice” by using a voice command or
STEP2-2 Press
, say the desired number, and select
“Confirm” by using a voice command.
Transferring data from the cellular phone
STEP2-1 Select “By Phone” and then “Confirm” by using a
voice command or
STEP2-2 Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone for the details of transferring data.
STEP2-3 Select the data to be registered by either of the fol-
lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice
command or
b. Select the desired data by using
259
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Inputting a phone number by using
STEP2-1 Select “Manual Input” by using
STEP2-2 Input a phone number by using
, and press
again.
Input the phone number one digit at a time.
Selecting a phone number from outgoing or incoming history
STEP2-1 Select “Call History” by using a voice command or
STEP2-2 Select “Outgoing” or “Incoming” by using a voice
command or
STEP2-3 Select the data to be registered by either of the fol-
lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using
a voice command or
b. Select the desired data by using
260
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
STEP 3
Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or
a. Press
and say the desired name.
b. Select “Record Name” by using
, and say the
desired name.
STEP 4
Select “Confirm” by using a voice command or
again.
STEP 3
In firm” registers the newly added phone number as speed dial.
, selecting “Set Speed Dial (Speed Dial)” instead of “Con-
261
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Setting speed dial
STEP 1
Select “Set Speed Dial (Speed Dial)” by using a voice com-
mand or
STEP 2
Select the data to be registered as speed dial by either of the following methods:
a. Press
, say desired number, and select “Confirm” by
using a voice command or
b. Press
, and say “List names”. While the desired
name is being read aloud, press
, and select “Con-
firm” by using a voice command or
c. Select the desired data by using
STEP 3
Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by
using a voice command or
b. Press and hold the desired preset button.
262
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Changing a registered name
STEP 1
Select “Change Name” by using a voice command or
STEP 2
Select a name to be changed by either of the following meth- ods.
a. Press
, say desired name, and select “Confirm” by
using a voice command or
b. Press
, and say “List names”. During the desired
name is read aloud, press
c. Select the desired name by using
STEP 3
Select “Record Name” by using a voice command or
STEP 4
Say a new name, and select “Confirm” by using a voice com-
mand or
263
AVALON_U_OM41430U
3-3. Using the hands-free system (for cellular phone)
Deleting registered data
STEP 1
Select “Delete Entry” by using a voice command or
Pattern A
STEP 2
Select data to be deleted by either of the following methods,
and select “Confirm” by using a voice command or
a. Press
, and say the name of the desired phone num-
ber to be deleted.
b. Press
, say “List phones”. While the name of the
desired phone number is being read aloud, press