2011 Subaru Forester Owners Manual

. A cell phone registered in the Hands- free system is called . The update for satellite radio starts. . The update for satellite radio stops.

the following operations is the screensaver turns off. the operation screen will not

If one of performed, However, be displayed. . Operate any button or any dial in a condition other than the following condi- tions

button while a than the CD mode is

– Pressing the mode other selected – Pressing the volume control buttons of the audio control buttons

Black plate (240,1)

– Pressing the power switch

. Insert a CD (except reloading a CD) . Connect a USB storage device or an iPod® NOTE The screensaver is not displayed under the following conditions. . While the ignition switch is in the “LOCK” position . While the audio is OFF . While the screen is OFF . While talking on a cell phone regis- tered in the Hands-free system . While setting the audio . While seek tuning, PTY group tun- ing, scan tuning or auto-storing while the FM/AM radio is on. . While in the category search mode of the satellite radio . While the rear view camera is being used

& Downloading picture Perform the following procedure to down- load a picture to be used as screensaver. 1. Connect a USB storage device. Refer to “Connecting USB storage device / iPod®” F5-34. 2. Select the “Picture Download” menu by operating the “TUNE/TRACK/CH” dial.

For details, refer to “Audio settings (type D audio)” F5-10. 3. Select operating the “TUNE/TRACK/CH” dial. 4. Select “Wide” or “Normal” by operating the “TUNE/TRACK/CH” dial.

the preferred JPEG file by

NOTE . JPEG files that are 10 MB or less can be saved. . If the file name is too long, the file may not be saved. . Up to two JPEG files can be saved in the in-vehicle equipment. . If the aspect ratio of the displayed picture is 16:9, “Wide” cannot be selected. . If the aspect ratio of the displayed picture is 4:3, “Normal” cannot be selected. & Selecting picture the “Picture Select” menu by 1. Select operating the “TUNE/TRACK/CH” dial. For details, refer to “Audio settings (type D audio)” F5-10. If no pictures are saved, “No Data” is displayed. Press the button to return to the “Screen Saver” mode. 2. Select the preferred picture by operat- ing the “TUNE/TRACK/CH” dial.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

& Erasing picture the “Picture Erase” menu by 1. Select operating the “TUNE/TRACK/CH” dial. For details, refer to “Audio settings (type D audio)” F5-10. If no pictures are saved, “No Data” is displayed. Press the button to return to the “Screen Saver” mode. 2. Select the preferred picture by operat- ing the “TUNE/TRACK/CH” dial. 3. Operate the “TUNE/TRACK/CH” dial to select “OK” to erase the picture or “Cancel” to cancel the operation.

Black plate (241,1)

Audio 5-57

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (2,1)

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Left Page

Model "ALL_MODEL_MEMO" EDITED: 2007/ 6/ 22

Black plate (11,1)

Interior equipment

Ashtray (if equipped)......................................... Floor mat ............................................................ Shopping bag hook ........................................... Coat hook........................................................... Cargo area cover (dealer option)...................... Using the cover ................................................. To remove the cover .......................................... To install the cover housing ............................... Cargo tie-down hooks ....................................... Under-floor storage compartment

(if equipped) .................................................... Rear view camera (if equipped) ........................ How to use the rear view camera ....................... Viewing range on the screen.............................. Help line............................................................

6-11
6-12
6-13
6-13
6-13
6-13
6-14
6-15
6-15

6-16
6-17
6-18
6-18
6-20

Interior lights ....................................................... Dome light .......................................................... Cargo area light .................................................. Map light............................................................. Sun visors ........................................................... Vanity mirror ....................................................... Storage compartment ......................................... Glove box ........................................................... Center console.................................................... Overhead console ............................................... Rear seat center table (if equipped) ..................... Coin tray............................................................. Cup holders ......................................................... Front passenger cup holder................................. Rear passenger cup holder (if equipped).............. Bottle holders ...................................................... Accessory power outlets....................................

6-2
6-2
6-3
6-3
6-4
6-5
6-5
6-5
6-5
6-7
6-7
6-7
6-8
6-8
6-8
6-9
6-9
Use with a cigarette lighter (dealer option) .......... 6-10

北米Model "A8160BE-B" EDITED: 2010/ 9/ 14

6-2 Interior equipment

Interior lights

When leaving your vehicle, make sure the lights are turned off to avoid battery discharge.

& Dome light

Type A

Type B 1) ON 2) DOOR 3) OFF

The dome light switch has the following three positions.

ON: The light remains on continuously. OFF: The light remains off. DOOR: The dome light illuminates auto- matically in the following cases. . Any of the doors or the rear gate is opened. . The doors or the rear gate are un- locked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.

Black plate (244,1)

The automatically illuminated dome light remains on for several seconds and then gradually turns off after all doors and the rear gate are closed.

While the light is illuminated, if any of the following operations are performed, the dome light turns off immediately. . The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position. . All doors and the rear gate are locked using the remote keyless entry transmitter.

The setting of the period for which the light remains on (OFF delay timer) can be changed as follows. . Models with genuine SUBARU navi- gation system: The setting can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the navigation system. Also, the setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details. . Models without genuine SUBARU navigation system: The setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

& Cargo area light

& Map light

! Door interlock switch

Black plate (245,1)

Interior equipment 6-3

1) DOOR 2) OFF 3) ON

The cargo area light switch has the following positions.

DOOR: The light illuminates when the rear gate is opened. The light remains illumi- nated for several seconds and turns off after the rear gate is closed. OFF: The light remains off. ON: The light remains on continuously.

1) Map light switch (lens)

1) Door interlock switch

To turn on the map light, push the lens. To turn it off, push the lens again.

When leaving the vehicle, make sure the lights are turned off to avoid battery discharge.

Although the map light switches (lenses) are in the OFF position (manually off), the map lights can be set to illuminate auto- matically in conjunction with the opening of the doors by use of the door interlock switch. The door interlock switch has the following positions.

OFF: The map lights do not illuminate automatically in conjunction with the open- ing of the doors. But, the lights can be turned on manually by pushing the map light switches (lenses). DOOR: The map lights illuminate auto- matically in the following cases. . Any of the doors other than the rear gate is opened. (The map lights do not – CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

6-4 Interior equipment

illuminate when only the rear gate is opened.) . The doors are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.

The automatically illuminated map lights remain on for several seconds and then gradually turn off after all doors are closed. While the lights are on, if any of the following operations are performed, the map lights turn off immediately. . The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position. . All doors and the rear gate are locked using the remote keyless entry transmitter.

the period for which the The setting of lights remain on (OFF delay timer) can be changed as follows. . Models with genuine SUBARU navi- gation system: The setting can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the navigation system. Also, the setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.

Black plate (246,1)

. Models without genuine SUBARU navigation system: The setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.

Sun visors

To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

& Vanity mirror

Storage compartment

& Glove box

Black plate (247,1)

Interior equipment 6-5

CAUTION

Keep the vanity mirror cover closed while the car is being driven to avoid being temporarily blinded by the glare of bright light.

CAUTION

. Always keep the storage com- partment closed while driving to reduce the risk of injury in the event of a sudden stop or an accident.

. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.

To use the vanity mirror, swing down the sun visor and open the vanity mirror cover.

Lock

1) 2) Unlock

To open the glove box, pull the handle. To close it, push the lid firmly upward.

To lock the glove box, insert the key and turn it clockwise. To unlock the glove box, insert the key and turn it counterclockwise.

& Center console The center console box provides a sto- rage space. the the top of console can be used as an armrest.

In addition,

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

6-6 Interior equipment

To use as an armrest:

1. Tip the console top forward from its vertical position.

driving position. Make sure the armrest is securely retained. To return the console top to the vertical position, raise the console top.

CAUTION

Do not step or sit on the armrest, and do not place heavy objects on it. The armrest could break, and you could get hurt.

To use as storage space:

Raise the console top to the vertical position.

2. Push the armrest part of the console top forward to the desired position. Adjust the position of to suit your

the armrest

Black plate (248,1)

1) Pocket console

The pocket console can be used to store small items.

CAUTION

Be careful not to trap your hands between the console top and con- sole box when raising and tipping the console top.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (249,1)

& Overhead console

& Rear seat center table (if

equipped)

cup holders.

Interior equipment 6-7

CAUTION

. Do not step or sit on the rear seat center table, and do not place heavy objects on it. The rear seat center table could break, and you could get hurt.

. When pulling out or returning the rear seat center table, make sure not to pinch fingers or other body parts.

To use the rear seat center table, pull the strap up.

& Coin tray

To open the console, push on the console lid lightly and the lid will automatically open.

CAUTION

When your vehicle is in the sun or on a warm day, the inside of the overhead console heats up. Avoid storing plastic or other heat-vulner- able or flammable articles such as a lighter in the overhead console.

The rear seat center table can be used as a storage space and as rear passenger’s

A coin tray is built in the center console.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (250,1)

& Rear passenger cup holder (if

equipped)

6-8 Interior equipment

Cup holders

CAUTION

Take care to avoid spills. Beverages, if hot, might burn you or your passengers. Spilled beverages may also damage upholstery, carpets or audio equipment.

& Front passenger cup holder

CAUTION

A dual cup holder is built in the center console, beside the parking brake lever.

Do not pick up a cup from the cup holder or put a cup in the holder while you are driving, as this may distract you and lead to an accident.

A dual cup holder is located on the rear seat center table.

The cup holder rear partition can be removed and placed on the front partition. This space can be used to store small items.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Bottle holders

trim can be used to hold beverage bottles and other items.

Accessory power outlets

Black plate (251,1)

Interior equipment 6-9

CAUTION

. Do not pick up a bottle from the bottle holder or put a bottle in the holder while you are driving, as this may distract you and lead to an accident.

. When placing a beverage in a door pocket, make sure it is capped. Otherwise, the beverage could spill when opening/closing the door or while driving and, if the beverage is hot, it could scald you.

The door pocket equipped on each door

Power outlet below the climate controls

Power outlet in the center console

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (252,1)

6-10 Interior equipment

Power outlet in the cargo area

(12V DC)

Accessory power outlets are provided below the climate controls, in the center console and in the cargo area. Electrical power from the battery is available at any of the outlets when the ignition switch is in either the “Acc” or “ON” position. You can use an in-vehicle electrical appliance by connecting it to an outlet. The maximum power rating of an appli- ance that can be connected is 120W. Do not use an appliance which exceeds the indicated wattage for each outlet. When using appliances connected to two or more outlets simultaneously, the total power consumed by them must not exceed 120W.

CAUTION

. Do not attempt to use a cigarette lighter in the accessory power outlets.

. Do not place any foreign objects, especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Al- ways put the cap on the acces- sory power outlet when it is not in use.

. Use only electrical appliances which are designed for 12V DC. The maximum power rating of an appliance that can be connected is 120W. Do not use an appliance which exceeds the indicated wat- tage for each outlet. When using appliances con- nected to two or more outlets simultaneously, the total power consumed by them must not exceed 120W. Overloading the accessory power outlet can cause a short circuit. Do not use double adapters or more than one electrical appliance.

. If the plug on your electric appli- ance is either too loose or too

tight for the accessory power outlet, this can result in a poor contact or cause the plug to get stuck. Only use plugs that fit properly.

. Use of an electric appliance in the accessory power outlet for a long period of time while the engine is not running can cause battery discharge.

. Before driving your vehicle, make sure that the plug and the cord on your electrical appliance will not interfere with your shifting gears and operating the accel- erator and brake pedals. If they do, do not use the electrical appliance while driving.

& Use with a cigarette lighter

(dealer option)

To use the accessory power outlet as a cigarette lighter socket, purchase the cigarette lighter plug, which is an optional accessory. A cigarette lighter plug is available from your SUBARU dealer. The cigarette lighter operates only when the ignition switch is in the “ON” or “Acc” position.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

To use the cigarette lighter, push in the knob and wait a few moments. It will automatically spring up when ready for use.

power a plug-in accessory. Doing so may cause the plug to stick and overheat, creating a potential fire hazard.

WARNING

To avoid being burned, never grasp the lighter by the end with the heating element. Doing so could result in injury and could also damage the heating element.

CAUTION

. Do not hold the lighter pushed in,

because it will overheat.

. Do not use a non-genuine cigar- ette lighter plug in the socket. Doing so may cause a short- circuit and overheating, resulting in a fire.

. If the socket is ever used for a plug-in accessory such as a cell phone, that may damage the portion of the socket’s internal mechanism that causes a cigar- ette lighter plug to “pop out” after its lighter element is heated. Therefore, do not place a cigar- ette lighter plug in a socket that has been used, even once, to

Black plate (253,1)

Interior equipment 6-11

Ashtray (if equipped)

CAUTION

. Do not use ashtrays as waste receptacles or leave a lighted cigarette in an ashtray. This could cause a fire.

. Always extinguish matches and cigarettes before putting them into the ashtray, and then close the ashtray securely. If you keep the ashtray open, the fire on the cigarette tip may spread to an- other cigarette butt and start a fire.

. Do not put flammable material in

the ashtray.

. Do not leave a lot of cigarette

butts in the ashtray.

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (254,1)

6-12 Interior equipment

Floor mat

The portable ashtray can be installed in each cup holder. For the locations of the cup holders, refer to “Cup holders” F6-8. When using the ashtray, open the lid of the ashtray. When removing the ashtray from a cup holder, pull the ashtray upwards. Fully close the lid after using the ashtray to help reduce residual smoke. NOTE Particles of ash and tobacco will accu- mulate around the hinges of the ash- tray’s inner lid. Clean them off using a toothbrush or another narrow-ended implement.

Retaining pins are located on the driver’s side floor. The floor mat is secured using the built-in grommets, by placing the grommets over the pins and pushing them downward.

CAUTION

Make sure the driver’s floor mat is placed back in its proper location and correctly secured on its retain- ing pins. Also, do not use more than one floor mat. If the floor mat slips forward and interferes with the movement of the pedals during driving, it could cause an accident.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Shopping bag hook

Coat hook

CAUTION

Do not hang items on the shopping bag hook that weigh 6 lbs (3 kg) or more.

A shopping bag hook is attached to each side of the cargo area.

A coat hook is attached to each side of the cargo area.

CAUTION

. Never hang anything on the coat hook that might obstruct the driver’s view or that could cause injury in sudden stops or in a collision.

. Do not hang items on the coat hook that weigh 6 lbs (3 kg) or more.

Black plate (255,1)

Interior equipment 6-13

Cargo area cover (dealer op- tion)

The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo.

& Using the cover

To extend the cover, pull the end of the cover out of the housing, then insert its hooks into the catches as shown. To rewind it, unhook it from the catches and it will rewind automatically. You should hold on to the cover and guide it back into the cover housing while it is rewinding.

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

6-14 Interior equipment

the front cover behind the rear

Install seatback.

WARNING

Do not place anything on the ex- tended cover. Putting excessive weight on the extended cover can break it and an object on the cover could tumble forward in the event of a sudden stop or collision. This could cause serious injury.

CAUTION

. Be careful not to scratch the rear gate stays while extending and rewinding the cover. Scratches on the stays could cause leakage

Black plate (256,1)

& To remove the cover 1. Rewind the cover.

of gas from the stays, which may result in their inability to hold the rear gate open.

. If the vehicle is equipped with a reclining rear seatback feature, when reclining the rear seatback, move the front cover backward so that the cover is not damaged.

2. Push the switch that is next to the right end of the cover housing. 3. Take it off the retainer.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

& To install the cover housing

both ends of the sleeve into the recesses of the retainers.

Cargo tie-down hooks

Black plate (257,1)

Interior equipment 6-15

1. Remove the cover of the retainers by prying on the edge with a flat-head screwdriver.

2.

Insert the projections located on the

The cargo area is equipped with four tie- down hooks so that cargo can be secured with a cargo net or ropes. When using the tie-down hooks, turn them down out of the storing recesses. When not the hooks up into the in use, put storing recesses.

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (258,1)

6-16 Interior equipment

CAUTION

The cargo tie-down hooks are de- signed only for securing light cargo. Never try to secure cargo that exceeds the capacity of the hooks. The maximum load capacity is 44
lbs (20 kg) per hook.

Under-floor storage compart- ment (if equipped)

. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.

The storage compartment is located under the floor of the cargo area, and it can be used to store small items. To open the lid, pull the tab up.

CAUTION

. Always keep the lids closed while driving to reduce the risk of injury in the event of a sudden stop or an accident.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Rear view camera (if equipped)

A rear view camera is attached to the rear gate. When the ignition switch is “ON” and the shift lever (MT models) or select lever (AT models) is set to “R”, the rear view camera automatically displays the rear view image from the vehicle on the navigation monitor.

WARNING

. Since the rear view camera uses a wide-angle lens, the image on the monitor is different from the actual view in terms of distance. . Since the range of the image on the monitor is limited, you should

always check the rear view and the surrounding area with your eyes and mirrors, and move backward at a slow speed. Mov- ing backward only by checking the monitor could cause an acci- dent.

. Do not disassemble or modify the camera, switch or wiring. If smoke comes out or you smell a strange odor, stop using the rear view camera immediately. Contact your SUBARU dealer for an inspection. Continued use may result fire or electric shock.

in accident,

CAUTION

. If your vehicle is washed with a high-pressure washer, do not allow water to contact the camera directly. Entry of water in the camera lens may result in con- densation, malfunction, fire or electric shock.

. Since the camera is a precision device, do not subject it to strong impacts. Otherwise, malfunction, fire or electric shock may occur. . If mud or snow sticks to or is

Black plate (259,1)

Interior equipment 6-17

frozen on the camera, you must be very careful removing it. Otherwise, damage done to the camera may cause a fire or electric shock. Pour water or lukewarm water over the camera to remove mud and ice, and wipe it with a soft, dry cloth.

. Do not put a flame close to the camera or wiring. Otherwise, da- mage or fire may occur.

. When replacing the fuse, be sure to use a fuse with the specified rating. Use of a fuse with a different rating may result in a malfunction.

. If the rear view camera is used for a long time while the engine is not operated, the battery may become completely discharged.

NOTE . Do not wipe the camera with alcohol, benzine or paint thinner. Otherwise, discoloration may occur. To remove contamination, wipe the camera with a cloth moistened with a diluted neutral detergent and then wipe it with a soft, dry cloth. . When waxing the vehicle, be careful not to apply the wax to the camera. If it – CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

6-18 Interior equipment

comes in contact with the camera, moisten a clean cloth with a diluted neutral detergent to remove the wax. . The camera lens has hard coating to help prevent scratches. However, when washing the vehicle or cleaning the camera lens, be careful not to scratch the camera lens. Do not use a washing brush directly on the camera lens. The monitor screen may be adversely af- fected. . Strong light shined on the camera lens may develop white light stripes around the light source. This is not a malfunction. . Under fluorescent light, the display may flicker. However, this is not a malfunction. . The image of the rear view camera may be slightly different from the actual color of the objects.

& How to use the rear view

camera

When the shift lever or select lever is set to “R”, the rear view camera automatically displays the rear view image from the vehicle. When the lever is set to other positions, the image before setting to “R” is displayed. 1. Set the ignition switch to “ON”. 2. Set the shift lever or select lever to “R”.

NOTE . For models with the genuine SUBARU navigation system, the image of the rear view camera has priority over other screen displays. Therefore, while the rear view camera is in opera- tion, the operations of other screens are disabled. To operate other screens, set the shift lever or select lever to a position other than “R”. . The image of the rear view camera is horizontally reversed as is the case with the vehicle rearview mirror or the side view mirror. . It may be difficult to see the image of the rearview camera in the following cases. This is not a malfunction of the camera.

– The vehicle is in a dark place (at night, in a tunnel, etc.). – The vehicle is in an extremely hot or cold place. – An object (such as raindrops, snow, dirt, etc.) that disturbs the view of the rear view camera sticks to the lens of the camera. – Strong light shined directly on the camera lens (occasionally, there are vertical lines on the screen).

Black plate (260,1)

& Viewing range on the screen

Range of view

Range of view

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (261,1)

Interior equipment 6-19

tion cannot be seen on the screen.

CAUTION

The range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.

Image from camera

Range of view

The area from the rear end of the bumper can be viewed. Areas at both ends of the bumper and areas just under the bumper cannot be viewed. Also, the image from the rear view camera looks shorter than the actual distance.

CAUTION

The range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.

Image from camera

The area above the camera cannot be viewed. If there is an object that has a wide projection on its upper part such as a sign pole behind the vehicle, the projec-

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

6-20 Interior equipment

& Help line The help line (distance marker and vehicle width line) is a guide to help you realize the actual distance from the screen.

1) Vehicle width line (oblique vertical line) 2) Approx. 10 feet (3 m) from the bumper

(green horizontal line)

3) Approx. 6.5 feet (2 m) from the bumper

(green horizontal line)

4) Approx. 3 feet (1 m) from the bumper

(yellow horizontal line)

5) Approx. 1.5 feet (0.5 m) from the bumper

(red horizontal line)

6) Vehicle centerline

When the shift lever or select lever is set to position “R”, the monitor screen dis- plays the help lines together with the rear view image.

CAUTION

. When moving backward, always check the back with your eyes without relying on the help lines. . The actual position may be dif- ferent from the indication of the help lines.

. Differences may occur due to number of passengers or loaded cargo.

. When the vehicle is on a slope or when the vehicle is inclined against the road, the indication is different from the actual posi- tion.

! Difference between screen and ac-

tual road

The distance markers show the distance for a level road when the vehicle is not loaded. It may be different from the actual distance depending on the loading condi- tions or road conditions.

Black plate (262,1)

! When there is an upward slope at the

back

1)

3 feet (1 m)

The distance on the screen looks farther than the actual distance.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

! When there is a downward slope at

the back

! Feature of distance marker

1)

3 feet (1 m)

The distance on the screen looks nearer than the actual distance. NOTE When cargo is loaded, the rear view distance on the screen looks farther than the actual distance as in an upward slope.

1) 2) 3)

3 feet (1 m) line 6.5 feet (2 m) line 10 feet (3 m) line

The distance marker shows the distance on the road. If there is a car or other object close behind, distance cannot be correctly displayed.

Black plate (263,1)

Interior equipment 6-21

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (2,1)

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Left Page

Model "ALL_MODEL_MEMO" EDITED: 2007/ 6/ 22

Fuel ...................................................................... Fuel requirements ............................................... Fuel filler lid and cap........................................... State emission testing (U.S. only)...................... Preparing to drive ............................................... Starting the engine.............................................. MT models .......................................................... AT models........................................................... Stopping the engine............................................ Remote engine start system (dealer option) .....

7-2
7-2
7-3
7-6
7-7
7-7
7-7
7-8
7-9
7-9
Starting your vehicle .......................................... 7-10
Remote start safety features ............................... 7-10
Entering the vehicle while it is running via remote

start................................................................. 7-10

Entering the vehicle following remote engine start

shutdown......................................................... 7-10

Pre-heating or pre-cooling the interior of the

vehicle ............................................................. Service mode ..................................................... Remote transmitter programming and

7-11
7-11

programmable feature option............................

7-11
System maintenance .......................................... 7-12
Manual transmission.......................................... 7-13
Shifting speeds .................................................. 7-14
Driving tips ........................................................ 7-14
Automatic transmission..................................... 7-15
Select lever ........................................................ 7-16
Shift lock function .............................................. 7-17
Selection of manual mode .................................. 7-19
Driving tips ........................................................ 7-20

Black plate (13,1)

Starting and operating

SPORT mode..................................................... Power steering................................................... Braking ............................................................... Braking tips....................................................... Brake system .................................................... Disc brake pad wear warning indicators ............. ABS (Anti-lock Brake System).......................... ABS system self-check ...................................... ABS warning light..............................................

Electronic Brake Force Distribution (EBD)

system ............................................................. Steps to take if EBD system malfunctions .......... Vehicle Dynamics Control system.................... Vehicle Dynamics Control system monitor.......... Vehicle Dynamics Control OFF switch ................

Tire pressure monitoring system (TPMS)

(U.S.-spec. models)......................................... Parking your vehicle ......................................... Parking brake .................................................... Parking tips ....................................................... Hill start assist system (MT models)................ Hill start assist warning light.............................. Cruise control .................................................... To set cruise control .......................................... To temporarily cancel the cruise control ............. To turn off the cruise control.............................. To change the cruising speed ............................ Cruise control indicator light.............................. Cruise control set indicator light ........................

7-20
7-21
7-22
7-22
7-22
7-23
7-23
7-23
7-23

7-24
7-24
7-25
7-26
7-27

7-28
7-29
7-29
7-30
7-31
7-32
7-32
7-33
7-34
7-34
7-35
7-36
7-36

北米Model "A8160BE-B" EDITED: 2010/ 9/ 14

Black plate (266,1)

7-2 Starting and operating

Fuel

CAUTION

Use of a fuel which is low in quality or use of an inappropriate fuel additive may cause engine damage.

& Fuel requirements ! Non-turbo models The engine is designed to operate using unleaded gasoline with an octane rating of 87 AKI (90 RON) or higher. ! Turbo models The engine is designed to operate using premium unleaded gasoline with an octane rating of 91 AKI (95 RON) or higher. If premium unleaded gasoline is not available, regular unleaded gasoline with an octane rating of 87 AKI (90 RON) or higher may be temporarily used. For optimum engine performance and drive- ability, it is required that you use premium grade unleaded gasoline. NOTE Be sure to use premium unleaded gasoline of 91 AKI (95 RON) or higher for turbo engine models. If other gaso-

line (lower than 91 AKI (95 RON)) is used, knocking, reduced output and poor accelerator response will result. ! Fuel octane rating This octane rating is the average of the Research Octane and Motor Octane numbers and is commonly referred to as the Anti Knock Index (AKI). Using a gasoline with a lower octane rating can cause persistent and heavy knocking, which can damage the engine. Do not be concerned if your vehicle sometimes knocks lightly when you drive up a hill or when you accelerate. Contact your SUBARU dealer if you use a fuel with the specified octane rating and your vehicle knocks heavily or persistently. ! Unleaded gasoline The neck of the fuel filler pipe is designed to accept only an unleaded gasoline filler nozzle. Under no circumstances should leaded gasoline be used because it will damage the emission control system and may impair driveability and fuel economy. ! Gasoline for California-certified

LEV

If your vehicle was certified to California’s low emission vehicle (LEV) standards as indicated on the underhood tune-up label, it is designed to optimize engine and

emission performance with gasoline that meets the clean burning low-sulfur Cali- fornia gasoline specifications. If you live in any other state than California, your vehicle will operate on gasoline meeting Federal specifications. Gasoline sold out- side California is permitted to have higher sulfur levels, which may affect the perfor- mance of your vehicle’s catalytic converter and may produce a sulfur exhaust odor or smell. SUBARU recommends that you try a different brand of unleaded gasoline having lower sulfur to determine if the problem is fuel related before returning your vehicle to an authorized dealer for service. ! MMT Some gasoline contains an octane-en- hancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). If you use such fuels, your emission control system performance may deteriorate and the CHECK ENGINE warning light/Mal- function indicator lamp may turn on. If this happens, return to your authorized SUBARU Dealer is determined that the condition is caused by the type of fuel used, repairs may not be covered by your warranty.

for service.

If

it

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

! Gasoline for cleaner air Your use of gasoline with detergent additives will help prevent deposits from forming in your engine and fuel system. This helps keep your engine in tune and your emission control system working properly, and is a way of doing your part for cleaner air. If you continuously use a high quality fuel with the proper detergent and other additives, you should never need to add any fuel system cleaning agents to your fuel tank.

Many gasolines are now blended with materials called oxygenates. Use of these fuels can also help keep the air cleaner. Oxygenated blend fuels, such as MTBE (Methyl Tertiary Butyl ether) or ethanol (ethyl or grain alcohol) may be used in your vehicle, but should contain no more than 15% MTBE or 10% ethanol for the proper operation of your SUBARU.

In addition, some gasoline suppliers are now producing reformulated gasolines, which are designed to reduce vehicle emissions. SUBARU approves the use of reformulated gasoline.

If you are not sure what the fuel contains, you should ask your service station operators if their gasolines contain deter- gents and oxygenates and if they have

been reformulated to reduce vehicle emis- sions.

it

As additional guidance, only use fuels suited for your vehicle as explained in the following description. . Fuel should be unleaded and have an octane rating no lower than that specified in this manual. . Methanol (methyl or wood alcohol) is sometimes mixed with unleaded gasoline. Methanol can be used in your vehicle ONLY if it does not exceed 5% of the fuel mixture AND if is accompanied by sufficient quantities of the proper cosol- vents and corrosion inhibitors required to prevent damage to the fuel system. Do not use fuel containing methanol EXCEPT under these conditions. . If undesirable driveability problems are experienced and you suspect they may be fuel related, try a different brand of gaso- line before seeking service at your SUBARU dealer. . Fuel system damage or driveability problems which result from the use of improper fuel are not covered under the SUBARU Limited Warranty.

CAUTION

Do not let fuel spill on the exterior surfaces of the vehicle. Because

Black plate (267,1)

Starting and operating 7-3

fuel may damage the paint, be sure to wipe off any spilled fuel quickly. Paint damage caused by spilled fuel is not covered under the SUBARU Limited Warranty.

& Fuel filler lid and cap ! Refueling Only one person should be involved in refueling. Do not allow others to approach the area of the vehicle near the fuel filler pipe while refueling is in progress. Be sure to observe any other precautions that are posted at the service station.

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

7-4 Starting and operating

1. To open the fuel filler lid, pull the lid release lever up. The lever is on the floor at the left of the driver’s seat.

WARNING

Before opening the fuel filler cap, first touch the vehicle body or a metal portion of the fuel pump or similar object to discharge any static electricity that may be present on your body. If your body is carry- ing an electrostatic charge, there is a possibility that an electric spark could ignite the fuel, which could burn you. To avoid acquiring a new static electric charge, do not get back into the vehicle while refueling is in progress.

1) Open 2) Close

2. Remove the fuel filler cap by turning it slowly counterclockwise.

WARNING

. Gasoline vapor is highly flam- mable. Before refueling, always first stop the engine and close all vehicle doors and windows. Make sure that there are no lighted cigarettes, open flames or electrical sparks in the adja- cent area. Only handle fuel out- doors. Quickly wipe up any spilled fuel.

Black plate (268,1)

. When opening the cap, grasp it firmly and turn it slowly to the left. Do not remove the cap quickly. Fuel may be under pres- sure and spray out of the fuel filler neck, especially in hot weather. If you hear a hissing sound while you are removing the cap, wait for the sound to stop and then slowly open the cap to prevent fuel from spraying out and creating a fire hazard.

3. Hook the cord that is attached to the fuel filler cap onto the hook inside the fuel filler lid.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

WARNING

. When refueling,

insert

the fuel nozzle securely into the fuel filler pipe. If the nozzle is lifted or not fully inserted, its automatic stop- ping mechanism may not func- tion, causing fuel to overflow the tank and creating a fire hazard.

. Stop refueling when the auto- matic stop mechanism on the fuel nozzle activates. If you con- tinue to add fuel, temperature changes or other conditions may cause fuel to overflow from the tank and create a fire hazard.

4. Stop filling the tank after the fuel filler pump automatically stops. Do not add any more fuel. 5. Put the cap back on, turn it clockwise until you hear a clicking noise. Be certain not to catch the tether under the cap while tightening. 6. Close the fuel filler lid completely. If you spill any fuel on the painted surface, rinse it off the painted surface could be damaged.

immediately. Otherwise,

NOTE . You will see the “ ” sign in the fuel gauge. This indicates that the fuel filler door (lid) is located on the right side of the vehicle. . If the fuel filler cap is not tightened until it clicks or if the tether is caught under the cap, the CHECK ENGINE warning light/malfunction indicator lamp may illuminate. Refer to “CHECK ENGINE warning light/Malfunction in- dicator lamp” F3-16.

CAUTION

. Never add any cleaning agents to the fuel tank. The addition of a cleaning agent may cause da- mage to the fuel system.

. After refueling, turn the cap to the right until it clicks to ensure that it is fully tightened. If the cap is not securely tightened, fuel may leak out while the vehicle is being driven or fuel spillage could occur in the event of an accident, creating a fire hazard.

. Do not let fuel spill on the exterior surfaces of the vehicle. Because fuel may damage the paint, be sure to wipe off any spilled fuel quickly. Paint damage caused by

Black plate (269,1)

Starting and operating 7-5

spilled fuel is not covered under the SUBARU Limited Warranty.

filler cap.

. Always use a genuine SUBARU fuel If you use the wrong cap, it may not fit or have proper venting and your fuel tank and emission control system may be damaged. It could also lead to fuel spillage and a fire.

. Immediately put fuel in the tank whenever the low fuel warning light illuminates. Engine misfires as a result of an empty tank could cause damage to the en- gine.

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

7-6 Starting and operating

State emission testing (U.S. only)

At state inspection time, remember to tell your inspection or service station in advance not to place your SUBARU AWD vehicle on a two-wheel dynam- ometer. Otherwise, serious transmis- sion damage will result.

Some states have started using dynam- ometers in their state inspection programs in order to meet their obligation under federal law to implement stricter vehicle emission standards to reduce air pollution from vehicles. A dynamometer is a tread- mill or roller-like testing device that allows your vehicle’s wheels to turn while the vehicle remains in one place. Depending on the severity of a state’s air pollution problems, the states must adopt either a “basic” or “enhanced” vehicle emission inspection test. Normally, a portion of the basic emission test consists of an emis- sion inspector inserting an analyzer probe into the exhaust pipe of an idling vehicle for a short period of time. States with more severe air pollution problems are required to adopt an enhanced vehicle emission test. This test simulates actual driving conditions on a dynamometer and permits more accurate measurement of tailpipe emitted pollution than the basic emission

test.

The U.S. Environmental Protection Agency (EPA) and states using two-wheel dynamometers in their emission testing programs have EXEMPTED SUBARU AWD vehicles from the portion of the testing program that involves a two-wheel dynamometer.

There are some states that use four-wheel dynamometers in their testing programs. When properly used, that equipment will not damage a SUBARU AWD vehicle.

Under no circumstances should the rear wheels be jacked off the ground, nor should the driveshaft be disconnected for state emission testing.

WARNING

Testing of an All-Wheel Drive vehicle must NEVER be performed on a single two-wheel dynamometer. At- tempting to do so will result in uncontrolled vehicle movement and may cause an accident or injuries to persons nearby.

Black plate (270,1)

CAUTION

Resultant vehicle damage due to improper testing is not covered under the SUBARU Limited War- ranty and is the responsibility of the state inspection program or its contractors or licensees.

The EPA has issued regulations for inspecting the On-Board Diagnostic (OBD) system as part of the state emis- sions inspection. The OBD system is designed to detect engine and transmis- sion problems that might cause vehicle emissions to exceed allowable limits. These inspections apply to all 1996 model year and newer passenger cars and light trucks. Over 30 states plus the District of Columbia have implemented the OBD system inspection. . The inspection of the OBD system consists of a visual operational check of the “CHECK ENGINE” warning light/mal- function indicator lamp (MIL) and an examination of the OBD system with an electronic scan tool while the engine is running. . A vehicle passes the OBD system inspection if proper the “CHECK ENGINE” warning light/MIL is observed, there are no stored diagnostic

illumination of

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

trouble codes, and the OBD system readiness monitors are complete. . A vehicle fails the OBD inspection if the “CHECK ENGINE” warning light/MIL is not properly operating or there are one or more diagnostic trouble codes stored in the vehicle’s computer with the “CHECK ENGINE” warning light/MIL illuminated. . A state emission inspection may reject (not pass or fail) a vehicle if the number of OBD system readiness monitors “Not Ready” is greater than one. Under this condition, the vehicle operator should be instructed to drive his/her vehicle for a few days to set the monitors and return for an emission re-inspection. . Owners of rejected or failing vehicles should contact their SUBARU Dealer for service.

Black plate (271,1)

Starting and operating 7-7

Preparing to drive

Starting the engine

You should perform the following checks and adjustments every day before you start driving. 1. Check that all windows, mirrors, and lights are clean and unobstructed. 2. Check the appearance and condition of the tires. Also check tires for proper inflation. 3. Look under the vehicle for any sign of leaks. 4. Check that the hood and rear gate are fully closed. 5. Check the adjustment of the seat. 6. Check the adjustment of and outside mirrors. 7. Fasten your seatbelt. Check that your passengers have fastened their seatbelts. 8. Check the operation of the warning and indicator lights when the ignition switch is turned to the “ON” position. 9. Check the gauges, indicator and warn- ing lights after starting the engine.

the inside

NOTE Engine oil, engine coolant, brake fluid, washer fluid and other fluid levels should be checked daily, weekly or at fuel stops.

CAUTION

Do not operate the starter motor continuously for more than 10 sec- onds. If the engine fails to start after operating the starter for 5 to 10
seconds, wait for 10 seconds or more before trying again.

NOTE It may be difficult to start the engine when the battery has been discon- nected and reconnected (for mainte- nance or other purposes). This diffi- culty is caused by the electronically controlled throttle’s self-diagnosis function. To overcome it, keep the ignition switch in the “ON” position for approximately 10 seconds before starting the engine.

& MT models 1. Apply the parking brake. 2. Turn off unnecessary lights and ac- cessories. 3. Press the clutch pedal to the floor and shift the shift lever into neutral. Hold the clutch pedal to the floor while starting the – CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

7-8 Starting and operating

engine. The starter motor will only operate when the clutch pedal is pressed fully to the floor. 4. Turn the ignition switch to the “ON” position and check the operation of the warning and indicator lights. Refer to “Warning and indicator lights” F3-12. 5. Turn the ignition switch to the “START” position without depressing the accelera- tor pedal. Release the key immediately after the engine has started. If following.

the engine does not start,

try the

for at

(1) Turn the ignition switch to the “OFF” position and wait least the 10 seconds. After checking that parking brake is firmly set, turn the ignition switch to the “START” position while depressing the accelerator pedal slightly (approximately a quarter of the full stroke). Release the accelerator pedal as soon as the engine starts. (2) If this fails to start the engine, turn the ignition switch back to the “OFF” position and wait least 10
seconds. Then fully depress the accel- erator pedal and turn the ignition switch to the “START” position. If the engine starts, quickly release the accelerator pedal. (3) If this fails to start the engine, turn

for at

the ignition switch again to the “OFF” position. After waiting for 10 seconds or longer, turn the ignition switch to the “START” position without depressing the accelerator pedal. (4) If the engine still refuses to start, contact your nearest SUBARU dealer for assistance.

6. Confirm that all warning and indicator lights have turned off after the engine has started. The fuel injection system auto- matically lowers the idle speed as the engine warms up.

& AT models 1. Apply the parking brake. 2. Turn off unnecessary lights and ac- cessories. 3. Shift the select lever to the “P” or “N” position (preferably “P” position). The starter motor will only operate when the select lever is at the “P” or “N” position. 4. Turn the ignition switch to the “ON” position and check the operation of the warning and indicator to lights. Refer “Warning and indicator lights” F3-12. 5. Turn the ignition switch to the “START” position without depressing the accelera- tor pedal. Release the key immediately after the engine has started.

Black plate (272,1)

the engine does not start,

If following.

try the

for at

for at

(1) Turn the ignition switch to the “OFF” position and wait least 10 seconds. After checking that the parking brake is firmly set, turn the ignition switch to the “START” position while depressing the accelerator pedal slightly (approximately a quarter of the full stroke). Release the accelerator pedal as soon as the engine starts. (2) If this fails to start the engine, turn the ignition switch back to the “OFF” position and wait least 10
seconds. Then fully depress the accel- erator pedal and turn the ignition switch to the “START” position. If the engine starts, quickly release the accelerator pedal. (3) If this fails to start the engine, turn the ignition switch again to the “OFF” position. After waiting for 10 seconds or longer, turn the ignition switch to the “START” position without depressing the accelerator pedal. (4) If the engine still refuses to start, contact your nearest SUBARU dealer for assistance.

6. Confirm that all warning and indicator lights have turned off after the engine has started. The fuel injection system auto- matically lowers the idle speed as the

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

engine warms up.

Stopping the engine

While the engine is warming up, make sure that the select lever is at the “P” or “N” position and that the parking brake is applied.

The ignition switch should be turned off only when the vehicle is stopped and the engine is idling.

CAUTION

If you restart the engine while the vehicle is moving, shift the select lever into the “N” position. Do not attempt to place the select lever of a moving vehicle into the “P” posi- tion.

WARNING

Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steer- ing and braking more difficult. It could also result in accidental acti- vation of the “LOCK” position on the ignition switch, causing the steering wheel to lock.

Black plate (273,1)

Starting and operating 7-9

Remote engine start system (dealer option)

WARNING

. Do not remote start a vehicle in an enclosed environment (e.g., in a closed garage). Prolonged op- eration of a motor vehicle in an enclosed environment can cause a harmful build-up of Carbon Monoxide. Carbon Monoxide is harmful to your health. Exposure to high levels of Carbon Monox- ide can cause headaches, dizzi- ness or in extreme cases uncon- sciousness and/or death.

. Before performing any servicing of the vehicle, temporarily place the remote engine start system in service mode to prevent the system from unexpectedly start- ing the engine.

– CONTINUED –

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

Black plate (274,1)

7-10 Starting and operating

& Starting your vehicle The remote control start system is acti- vated by pressing the “ ” button twice within 3 seconds on your remote control transmitter. The system will check certain pre-conditions before starting, and if all safety parameters are correct, the engine will start within 5 seconds. While the vehicle is operating via remote engine start, the vehicle’s power window features will be disabled. Also, the system has a timer and will shut down after 15 minutes if you do not operate the vehicle. Press and hold the “ ” button for 2 seconds again to turn the vehicle off. If the vehicle’s starter cranks but does not start or starts and stalls, the remote engine start system will power off then attempt to start the vehicle

an additional four times. If the vehicle fails to start after the additional attempts, the remote engine start system will abort and return to a non-activated state.

& Remote start safety features For safety and security reasons, the system will fail to start and beep the horn twice or shut down the engine during remote start operation if any of the following conditions occur. . The brake pedal is pressed before the vehicle ignition switch is turned “on”. . The key was already in the ignition switch. . The engine hood is opened. . The vehicle’s engine idle speed has reached a level over 3,000 rpm. . The alarm is triggered by opening a door or the rear gate. NOTE . The security indicator light on the dashboard will stop flashing while under remote engine start operation, but the vehicle is still protected. . If the vehicle is entered during remote engine start operation, the system will not record entry in the alarm history.

& Entering the vehicle while it is running via remote start

If

1. Unlock the vehicle doors using the the vehicle’s keyless entry system. doors are unlocked manually using the key, the vehicle’s alarm system will trigger and the remote engine start system will turn off. Inserting the key into the ignition switch and turning it to the “ON” position or pressing the unlock button “ ” on the remote keyless entry transmitter will dis- arm the alarm system. Refer to “Alarm system” F2-15. 2. Enter the vehicle. Do not depress the brake pedal. 3. Insert the key into the ignition switch and turn to the “ON” position. If the ignition switch is accidentally turned to the “START” position, the system’s “starter anti-grind” feature will prevent the starter from re-cranking. 4. Depress the brake pedal. The remote the vehicle’s power starter disengages, window features are re-enabled and the vehicle will operate normally.

& Entering the vehicle follow-

ing remote engine start shut- down

An alarm trigger may occur if the vehicle is opened by the remote keyless entry

北米Model "A8160BE-B" EDITED: 2010/ 10/ 14

transmitter within a few seconds immedi- ately following remote engine start shut- down.

& Pre-heating or pre-cooling the interior of the vehicle

Before exiting the vehicle, set the tem- perature controls to the desired setting and operation. After the system starts the vehicle, the heater or air-conditioning will activate and heat or cool the interior to your setting.

& Service mode In service mode, the remote start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced. ! To engage the service mode Turn the ignition switch to the “ON” position, depress and hold the brake ” pedal, button on the remote control transmitter three times. The system will pause for 1
second and then flash the turn signal lights and honk the horn three times indicating that the system is in service mode. When attempting to activate the remote start system while in service mode, the turn signal lights will flash and the horn will honk two times and will not

then press and release the “

then press and release the “

start. ! To disengage the service mode Turn the ignition switch to the “ON” position, depress and hold the brake ”