Login- 2005 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2007 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2012 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2009 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2004 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2011 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2003 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2010 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- 2006 Nissan Murano Owners Manuals
- Nissan Murano Owners Manuals
- Download PDF Manual
-
WARNING
When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Battery saver system GUID-A19290B7-AD6C-4095-AB12-FAB3BC8E2D05
A chime will sound when the driver side door is opened with the light switch in the or position and the ignition switch in theor
ACC, OFF or LOCK position. When the headlight switch is in the position while the ignition switch is in the ON position, the lights will automatically turn off 5
minutes after the ignition switch has been pushed to the OFF position. When the headlight switch remains in the or off, switch is pushed to the ON position.position after the lights automatically turn turn on when the ignition
the lights will
CAUTION
. When you turn on the headlight switch again after the lights auto- matically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, other- wise the battery will be discharged. . Never leave the light switch on when the engine is not running for extended periods of time even if the
2-38 Instruments and controls
Black plate (127,1)
HAZARD WARNING FLASHER SWITCH
GUID-6A75B42D-D28E-4CDF-84D2-DC5652B93673
SIC3671
SIC3672
SIC2574
GUID-05BFC159-21E8-4470-8F9F-A8F1315EF7D5
TURN SIGNAL SWITCH *1 Turn signal GUID-B3C07939-E89F-428A-BA7C-0BA5D82E2BAF Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. *2 Lane change signal GUID-8FD0B298-53B2-4596-8590-D033172CF1AF To indicate a lane change, move the lever up or down to the point where lights begin flashing.
FOG LIGHT SWITCH (if so equipped) GUID-B77E006A-B448-42A0-B9EB-E9953893F221
To turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. To turn them off, turn the switch to the OFF position. The headlights must be on for the fog lights to operate.Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash.
WARNING
If stopping for an emergency, be sure to move the vehicle well off the road.
. Do not use the hazard warning flashers while moving on the high- way unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.
Instruments and controls 2-39
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
.
Turn signals do not work when the hazard warning flasher lights are on.
The flasher can be actuated with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving.
Black plate (128,1)
HORN
HEATED STEERING WHEEL (if so equipped)
GUID-76AEBFE4-FB9E-4225-A909-4F10E8A5C7A6
GUID-158A9409-77D0-4867-8A63-D9F0D56BF7B6
SIC3586
To sound the horn, push the pad area *A of the steering wheel.WARNING
Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tampering with the supplemental front air bag system may result in serious personal injury.
SIC4401
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 688F (208C). Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light *1 on the switch will illuminate. If the surface temperature of the steering wheel is below 688F (208C), the system will heat the steering wheel and cycle off and on to maintain a temperature above 688F (208C). The indicator light will remain on as long as the system is on. Push the switch again to turn the heated steering wheel system off manually. The indica- tor light will turn off.
2-40 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
NOTE:
If the surface temperature of the steering wheel is above 688F (208C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction.
Black plate (129,1)
damage to the heater.
. Any liquid spilled on the heated seat should be removed immediately with a dry cloth.
. When cleaning the seat, never use gasoline, thinner, or any similar materials.
If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by a NISSAN dealer.
Instruments and controls 2-41
HEATED SEATS (if so equipped)
GUID-633E2177-1D7D-44F5-94F5-0C74D026B322
WARNING
Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat tempera- tures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in serious injury.
CAUTION
The battery could run down if the seat heater is operated while the engine is not running.
. Do not use the seat heater for extended periods or when no one is using the seat.
. Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated.
. Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (130,1)
CLOCK
GUID-53AD618D-9089-48A6-866B-1B418BEC8B62
MODELS WITH COLOR DISPLAY GUID-9BC2B067-0CB2-4D68-A1A5-7BFFBFAD895C To adjust the clock on the front color display, use the SETTING button on the center multi- function control panel. See “How to use SETTING button” in the “4. Monitor, heater, air conditioner, audio, phone and voice recognition systems” section. The clock settings display cannot be operated while driving. Stop the vehicle in a safe place and apply the parking brake before setting the clock. MODELS WITHOUT COLOR DISPLAY GUID-8DDA095F-EC3A-4CDC-BF15-CE4DA0C40D53
The digital clock (in the audio unit) displays the time when the ignition switch is in the ACC or ON position. To adjust the clock, see “FM-AM radio with Compact Disc (CD) changer” in the “Monitor, heater, air conditioner, audio, phone and voice recognition systems” section.light goes off. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn off the switch.
SIC2770
The seats are warmed by built-in heaters. The switches located on the center console and rear doors (if so equipped for rear seats) can be operated independently of each other. 1. Start the engine. 2. Select heat range.
*1 For high heat, push the HI (High) side of the switch. *2 For low heat, push the LO (Low) side of the switch. The indicator light in the switch *3 will illuminate when the heater is on.
3. To turn off the heater, return the switch to the level position. Make sure the indicator
2-42 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (131,1)
VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH
POWER OUTLET
GUID-6C21F80D-D0C6-473F-BAEB-444C091BCCDE
GUID-6E6BB70A-A5D0-4C05-9E0F-176C7AC9D46F
SSD1153
SIC3587
SIC3652
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF switch. The Push the VDC OFF switch again or restart the engine to turn on the system. (See “Vehicle Dynamic Control (VDC) system” in the “5. Starting and driving” section.)
indicator will illuminate.
Center console
Console box — Type A
Cargo area (Hardtop models)
Console box — Type B
SIC3651
SIC3653
Instruments and controls 2-43
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (132,1)
CIGARETTE LIGHTER AND ASHTRAY (if so equipped)
GUID-4C7EBD79-5E6D-4E92-9577-71A7BEE6B260
SIC3588
To open the ashtray lid, push the lid down and release it *1 . To empty the ashtray, pull out *2 . The cigarette lighter operates when the ignition switch is in the ON position. Push the lighter in all the way *3 , then release it. When the lighter is heated, it will spring out. Return the lighter to its original position after use.
CAUTION
The cigarette lighter socket is a power source for the cigarette light-
To use the power outlet, pull illustrated.
the cover as
. When not in use, be sure to close the cap. Do not allow water to contact the outlet.
CAUTION
The outlet and plug may be hot during or immediately after use.
. Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. . Use power outlet with the engine running to avoid discharging the vehicle battery.
. Avoid using power outlet when the air conditioner, headlights or rear window defroster is on.
This power outlet is not designed for use with a cigarette lighter unit. . Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal tem- perature fuse may open.
. Before inserting or disconnecting a plug, be sure the electrical acces- sory being used is turned OFF.
2-44 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
er element only. The use of the cigarette lighter socket as a power source for any other accessory is not recommended.
. Do not use any other power outlet
for an accessory lighter.
Black plate (133,1)
STORAGE
CUP HOLDERS
GUID-86E3CA2B-BC40-4857-A4C1-B3487E3BB786
GUID-4F3D35E7-AF46-473C-BC0C-F0EE7C53FAAC
CAUTION
. Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger.
. Use only soft cups in the cup holder. Hard objects can injure you in an accident.
SIC3118
Front
GUID-B482EF25-AADD-4164-87B3-E8C8642A9631
Front To open the cup holder, push the lid *1 . To remove the inner tray for cleaning, pull it up as illustrated *2 .
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-45
Black plate (134,1)
SIC3042
SIC4742
SIC3589
Hardtop models
CrossCabriolet models
Rear Pull the armrest forward until it is horizontal.
GUID-D403F1AF-3B46-4568-9E5A-F5957C8699C4
The cup holders are located on the center of rear seat.
SUNGLASSES HOLDER (Hardtop models)
GUID-53F668A0-3562-4634-B37B-CFE15C4C94BD
WARNING
Keep the sunglasses holder closed while driving to prevent an accident.
To open the sunglasses holder, push *1 .
CAUTION
. Do not use for anything other than
glasses.
2-46 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (135,1)
. Do not leave glasses in the sun- glasses holder while parking in direct sunlight. The heat may da- mage the glasses.
GLOVE BOX
GUID-D5755917-EFBF-415E-AE59-B43411F701B6
SIC3590
WARNING
Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
To open the glove box, pull the handle *1 . To close, push the lid in until the lock latches. To lock *2 /unlock *3
the glove box, use the mechanical key. For the mechanical key usage, see “Keys” in the “3. Pre-driving checks and adjustments” section.[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-47
Black plate (136,1)
SIC3654
SIC3591
Rear Rear (Hardtop models) To open, push the knob *1 and pull out *2 .
GUID-92205B1E-0645-4A20-A11C-FD29D6989A28
Front
GUID-5C4739C0-4DF5-44A9-B5FD-FBFAAABBD011
GUID-DD4ABB5A-EB54-4D5E-B3ED-627D92BFD082
CONSOLE BOX Front When the lever *A (driver’s seat side) is pulled, the upper case is available for storing some small items. When the lever *B (front passen- ger’s seat side) is pulled, the bottom case is available for storing some larger ones.
2-48 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (137,1)
SIC3593
SIC3655
SIC3656
GUID-A2B41DF3-66C9-4356-B69B-5EF4B1E23F3B as
STORAGE BOX (if so equipped) To open, push the storage box lid *1
illustrated. The inner tray can be removed *2 as illustrated. Do not place valuable items in the storage box.Do not use the storage box as an ashtray.
Type A
Type B
CARGO FLOOR BOX (Hardtop models)
GUID-22855E8F-5045-4BAA-A462-88723F2D13B2
Type A GUID-D8151D1B-506A-40B8-A864-5F630B4E8E0B 1. To open the cargo floor box, pull the strap
*A .
2. Remove the strap *B from the back side of the board and hang it on the lip of the lift gate.
GUID-4B77D327-C009-48B6-8B7B-1FC4BF4CC444
Type B To open the cargo floor box, push *A . To close, push the lid until the lock latches. The net partitions can be removed *B to make a larger storage space. The cargo floor box needs to be removed when you need a spare tire. (See “Flat tire” in the “6. In case of emergency” section.)
CAUTION
To avoid damage, do not load more than 22 lbs (10 kg) of cargo into the
Instruments and controls 2-49
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (138,1)
cargo floor box.
SIC3594
LUGGAGE SIDE BOX (Hardtop mod- els) GUID-9D068CD2-3E85-4F54-A788-DBF041E5F1B2
To open the luggage side box, pull up the strap.SIC3595
CARGO COVER (if so equipped for Hardtop models) GUID-3641C44E-8123-4F91-B5B7-07B068F6D402
The cargo cover keeps the contents in the cargo area hidden from the outside. To use the cargo cover, pull it out and hang both sides on the hooks *1 .2-50 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (139,1)
restraint top tether strap is da- maged.
— If the cargo cover contacts the top tether strap when it is at- tached to the top tether anchor, remove the cargo cover from the vehicle or secure it on the cargo floor below its attachment loca- tion. If the cargo cover is not removed, it may damage the top tether strap during a collision.
— Do not allow cargo to contact the top tether strap when it is attached to the top tether an- chor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or that con- tacts the top tether strap may damage the top tether strap during a collision.
To use the sub cover, hang the straps on the back of the headrest *2 . To stow the cargo cover, remove it from the hooks and hold until it is retracted. To remove the cargo cover, stow the cover and pull the left side of the holder to the opposite side *3 .
WARNING
. Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop.
. Close the cargo cover when folding
the rear seat.
. Do not leave the cargo cover in the vehicle with it disengaged from the holder.
. Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unse- cured cargo could cause personal injury.
. Your child could be seriously injured or killed in a collision if the child
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
LUGGAGE HOOKS (Hardtop models)
GUID-A76D431E-5514-466D-8503-9352D8CBD662
SIC3596
WARNING
. Always make sure that the cargo is properly secured. Use the suitable ropes and hooks.
Instruments and controls 2-51
Black plate (140,1)
WARNING
. Do not place anything over the luggage cover during soft top op- eration.
. Do not place or leave objects under the cover that may push the cover up.
. Do not place items on sides that
intrude into luggage cover area.
. Unsecured cargo can become dan- gerous in an accident or sudden stop.
CAUTION
Do not apply a total load of more than 22 lb (10 kg) *A or 7 lb (3 kg) *B to a single hook.
SIC4744
LUGGAGE COVER (CrossCabriolet models) GUID-6FCB585A-E72B-4BA2-A8FD-8ADDC214EFA2
A luggage cover is used to separate the trunk and the top storage area. To use the luggage cover, pull it out and hang both sides on the hooks *1 . To stow the luggage cover, remove it from the hooks and hold it until it is retracted. The luggage cover must be pulled out and hung on hooks *1
for the soft top to oparate. (See “Soft top (CrossCabriolet models)” in the “3. Pre-driving checks and adjustments” section.)2-52 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (141,1)
CAUTION
Use care when placing or removing items from the roof rack. If you cannot comfortably lift the items onto the roof rack from the ground, use a ladder or stool.
information regarding GVWR and GAWR, see “Vehicle loading information” in the “9. Technical and consumer information” section.
WARNING
. Drive extra carefully when the vehi- cle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack.
. Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sud- den or unusual handling maneuvers. . Roof rack load should be evenly
distributed.
. Do not exceed maximum roof rack
load weight capacity.
. Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.
SIC3597
ROOF RACK (if so equipped for Hard- top models) GUID-75E038EF-E93A-4F7C-AC23-5CF5D424F222
Always distribute the luggage evenly on the roof rack. Do not load more than 165 lb (75 kg) (black) or 220 lb (100 kg) (silver) on the roof rails. Observe the maximum load limit shown on the crossbars or roof carriers when you attach them on the roof rails. Contact a NISSAN dealer for crossbar or other equipment information. Be careful that your vehicle does not exceed the Gross Vehicle Weight Rating (GVWR) or its Gross Axle Weight Rating (GAWR front and rear). The GVWR and GAWR are located on the F.M.V.S.S. or C.V.M.S.S. certification label (lo- cated on the driver’s door pillar). For more[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-53
Black plate (142,1)
WINDOWS
POWER WINDOWS
GUID-F440431D-2466-4C69-98F0-4066DC360F6E
GUID-B224B039-2B26-4B2E-990E-61770AE48A00
SIC3505
COAT HOOKS (Hardtop models) GUID-81FB43A8-33F0-4D0C-8696-020589E0AB14
The coat hooks are equipped beside the rear personal lights.CAUTION
Do not place items which are more than 2 lb (1 kg) on the hook.
WARNING
. Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the win- dow lock switch to prevent unex- pected use of the power windows.
. Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols and become trapped in the window. Unattended children could become involved in serious acci- dents.
If
the driver’s or
The power windows operate when the ignition switch is in the ON position or for about 45
seconds after the ignition switch is pushed to the OFF position. front passenger’s door is opened during this period of about 45 seconds, power to the windows is canceled. The power window switches will be deactivated during soft top operation (CrossCabriolet mod- els).SIC3283A
Driver side window Front passenger side window Rear left passenger side window Rear right passenger side window
1. 2. 3. 4. 5. Window lock button Main power window switch (driver’s side) To open or close the window, push down *A or pull up *B the switch and hold it. The main switch (driver side switches) will open or close all the windows.
GUID-26DFB0BE-6989-43F9-8167-0F6C3694B624
2-54 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (143,1)
GUID-16F0A2BC-0A92-4EBF-AEF9-3903882D9E1D
Locking passengers’ windows When the lock button *C is pushed in, only the driver side window can be opened or closed. Push it in again to cancel.
SIC3336
SIC3285
Passenger side power window switch GUID-4D77BC1E-53A2-4A38-9A39-222E83528CCC The passenger side switch will open or close only the corresponding window. To open or close the window, push down or pull up the switch and hold it.
Hardtop models
SIC4743
CrossCabriolet models
Instruments and controls 2-55
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (144,1)
Auto reverse function
GUID-19580295-1D80-4877-93A6-203373FD0AB2
WARNING
There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., in- side the vehicle before closing the window.
If the control unit detects something caught in the window as it is closing, the window will be immediately lowered. The auto reverse function can be activated when the window is closed by automatic operation when the ignition switch is in the ON position or for 45 seconds after the ignition switch is pushed to the OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the window occurs.
Automatic window lowering (CrossCab- riolet models) GUID-68431D2A-45C1-4082-9602-DC8E37328739
When the soft top operating switch is pressed, the power windows will automatically be low- ered completely. The windows do not rise automatically after top open/close operation is completed. Use the power window switches to raise them.the soft
Automatic adjusting function (Cross- Cabriolet models)
GUID-2A57D8B8-D2B5-4017-A2B4-5D5758878B3A
CAUTION
When the battery cable is removed from the battery terminal, do not close either of the front doors. The automatic win- dow adjusting function will not work and the side roof panel may be da- maged.
The power window has an automatic adjusting function. When the door is being opened, the window is automatically lowered slightly to avoid contact between the window and the top side rail. When the door is closed, the window is automatically raised slightly. While the automatic adjusting function does not work, the window will be controlled as follows:
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
mark on its surface.
Automatic operation GUID-3B0158AA-9687-4021-B3A8-12225F5D2198
The automatic function is available for the switch that has an To fully open or close the window, completely push down or pull up the switch and release it; it need not be held. The window will automatically open or close all the way. To stop the window, just push or the switch in the opposite direction. A light push or pull on the switch will cause the window to open or close until the switch is released. The rear window automatic operation is for the opening function only (CrossCabriolet models).lift
Simultaneous operation of all four win- dows (CrossCabriolet models)
GUID-F3222C8C-2BD6-4165-85A5-6DEB6C706AF6
WARNING
Make sure that all passengers have their hands, etc. inside the vehicle before closing the windows.
When the driver’s and passenger’s door window switches (driver’s side) are pushed down or pulled up simultaneously, all four windows are opened or closed.
2-56 Instruments and controls
Black plate (145,1)
AUTOMATIC MOONROOF AND SUN- SHADES GUID-3349AE79-1AF5-473F-9AB7-69A7957FBC85
The moonroof and sunshades only operates when the ignition switch is in the ON position. The automatic moonroof and sunshades are operational for about 45 seconds, even if the ignition switch is pushed to the OFF position. If the driver’s door or the passenger’s door is opened during this period of about 45 seconds, power to the moonroof and sunshades is canceled.MOONROOF (if so equipped for Hardtop models)
GUID-B46D76D1-C71E-43ED-8E5B-5188E0D125CB
WARNING
In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints.
. Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing.
CAUTION
. Remove water drops, snow, ice or sand from the moonroof before opening.
. Do not place any heavy object on the moonroof or surrounding area. . Do not push or pull on the sun- shade. Doing so can damage the sunshade.
. When the door
is opened,
the window
lowers for approximately 0.39 in (10 mm).
. While the door is open, the window cannot
be raised.
If the windows do not close automatically GUID-4DA9302E-1FB0-4884-925F-1A056E33BC0E If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door and soft top (CrossCabriolet
models).
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.
5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
If the power window automatic function does not operate properly after performing the pro- cedure above, have your vehicle checked by a NISSAN dealer.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-57
Black plate (146,1)
operation, push the moonroof switch to either of the OPEN *1 , CLOSE *2 or UP *5 position. Tilting moonroof GUID-5BCB6B6D-1017-4E94-B105-E837913634C6
To tilt up the moonroof, push the moonroof switch to the UP position *5 . To tilt down the moonroof, push the switch to the UP position *5
or push the switch to the CLOSE position *2 . When the moonroof is tilted up, push the moonroof switch to the second detent to the CLOSE position *4 . The moonroof will tilt down and the sunshades will close.Auto reverse function
GUID-07736A6E-057D-4405-B60A-86505A7F3C58
WARNING
There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., in- side the vehicle before closing the moonroof.
If the control unit detects something caught in the moonroof and sunshades when they are closing, the moonroof will be immediately opened.
The auto reverse function can be activated when the moonroof and sunshades are closed by automatic operation when the ignition switch is in the ON position or for about 45 seconds after the ignition switch is pushed to the OFF position. If the moonroof and sunshades cannot be closed automatically when the auto reverse function activates due to a malfunction, push and hold the switch to the CLOSE position *2 . Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the moonroof occurs.
If the moonroof does not operate GUID-55D929EA-1A05-47B0-9DBB-75466D80DB38
If the moonroof does not operate properly, perform the following procedure to initialize the moonroof operation system. 1.If the moonroof is open, close it fully by pushing the switch to the CLOSE position *2 .
2. Push and hold the switch to the CLOSE
position *2 .
3. Release the moonroof switch after
the moonroof or sunshade moves slightly to the closed position.
SIC3801
Sliding sunshade and moonroof GUID-35ECC1C1-78E5-4B3C-860F-E718E2CD552D When the moonroof switch is pushed to the OPEN position *1 , the front and rear sun- shades will fully open. When the switch is pushed again, the moonroof will fully open. When the moonroof switch is pushed to the CLOSE position *2 , the moonroof will auto- matically close. Push the switch again, and the front and rear sunshades will close. When the moonroof switch is pushed to the second detent to the OPEN *3 or CLOSE *4
position, both the sunshade and moonroof will open or close. To stop the sunshades or moonroof during the2-58 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
4. Push and hold the switch to the CLOSE
position *2
for 10 seconds.
5. The moonroof and sunshades will fully open
and then close.
6. Check if normally.
the moonroof switch operates
If the moonroof does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer.
Black plate (147,1)
INTERIOR LIGHTS
GUID-396974CF-8D5C-4223-9393-BF5087FE27B2
SIC4238
SIC3250
MAP LIGHTS GUID-EACC0B68-0B00-4B4C-B7BA-2C1E9F1879FC Push the button as illustrated to turn the light on or off.
PERSONAL LIGHTS (Hardtop models)
GUID-649CAF7C-2CCF-4E76-A1BD-9F34B3E94A95
Rear GUID-0958BB58-F974-4165-8A79-D4E6DD15AACD Push the button as illustrated to turn the light on or off.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-59
Black plate (148,1)
any door is opened with the ignition switch in any position — remain on while the door
is opened. When the door is closed, the lights go off.
GUID-2E9E6196-2FCF-4993-83DD-8C4EF8E70D73
OFF position When the switch is in the OFF position *3 , the lights will not the condition.
regardless of
illuminate,
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
— remain on for about 15 seconds. doors are unlocked by pushing the UN- LOCK button on the Intelligent Key or door handle request switch with the ignition switch in the LOCK position — remain on for about 15 seconds. any door is opened and then closed with the ignition switch in the LOCK position — remain on for about 15 seconds. any door is opened with the ignition switch in the ACC or ON position — remain on while the door
is opened. When the door is closed, the lights go off.
The lights will also turn off after 15
minutes when the lights remain illumi- nated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming dis- charged. Models with color display: When the auto interior illumination is set to the OFF position (see “Vehicle information and settings” in the “4. Monitor, heater, air condi- tioner, audio, phone and voice recognition systems” section), the lights will illuminate under the following condition:SIC4239
INTERIOR LIGHT CONTROL SWITCH GUID-2A6055BA-7B37-4FE4-B397-77EF5A05A796
The interior light control switch has three positions: ON, DOOR and OFF.ON position When the switch is in the ON position *1
map lights and rear personal nate.GUID-7462AA90-5FAE-4F84-925A-24F0133E09B3
the illumi-lights will
GUID-2534F567-EC7E-4D89-9E58-CCFFC0DDC2B3
DOOR position When the switch is in the DOOR position *2 , the map lights and rear personal lights will illuminate under the following conditions:
ignition switch is switched to the LOCK position
2-60 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (149,1)
MOOD LIGHTS (Hardtop models)
VANITY MIRROR LIGHTS
CARGO LIGHTS (Hardtop models)
GUID-010F00F5-89B1-468A-B28C-562B74BD8B74
GUID-6E431C2A-BCAB-4ED8-9FA7-03F14AE124F0
GUID-AC16BAD8-F320-4304-996B-A0D05319728A
SIC3599
SIC2064
Map lights
or
position.
next to the map lights under the instrument panel under the driver’s power window switch
The mood lights *A located in the following positions will illuminate whenever the headlight switch is in the The brightness of adjusted with the illumination control buttons. See “Instrument brightness control” earlier in this section.
the mood lights can be
The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. When the cover is closed, the light will turn off. The lights will turn off after 15 minutes when the lights remain illuminated to prevent the battery from becoming dis- charged.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SIC2131A When the switch is in the ON position *1 , the light illuminates while the lift gate is opened. When the lift gate is closed, the light will turn off. When the switch is in the OFF position *2 , the light will turn off. The lights will turn off after 15 minutes when the light remain illuminated to pre- vent the battery from becoming dis- charged.
Instruments and controls 2-61
Black plate (150,1)
reverse features as required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982.) A garage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features in- creases the risk of serious injury or death.
. During programming procedure, your garage door or security gate may open or close. Make sure that people and objects are clear of the garage door, gate, etc. that you are programming.
. Your vehicle’s engine should be turned off while programming HomeLink® Universal Transceiver.
TRUNK LIGHT (CrossCabriolet models)
HomeLink® UNIVERSAL TRANSCEIVER (if so equipped)
GUID-F7665349-183E-4013-AA39-F31226267085
The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light will turn off. The light will also turn off after 15 minutes when the light remains illuminated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming discharged.GUID-55E56F2F-00B7-4A2E-969B-A4422F852328
HomeLink® Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink® Universal Transceiver: . Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and security systems. Is powered by your vehicle’s battery. No separate batteries are required. the vehicle’s battery is discharged or is dis- connected, HomeLink® will retain all pro- gramming.If
Once HomeLink® Universal Transceiver is programmed, retain the original transmit- ter for future programming procedures (Example: new vehicle purchases). Upon sale of the programmed HomeLink® Universal Transceiver buttons should be erased for security purposes. For additional information, see “Program- ming HomeLink®” later in this section.
the vehicle,
WARNING
. Do not use HomeLink® Universal Transceiver with any garage door opener that lacks safety stop and
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
2-62 Instruments and controls
Black plate (151,1)
PROGRAMMING HomeLink® GUID-D8C5E61E-41B3-4673-B29E-956822CDD882
To program your HomeLink® Transceiver to operate a garage door, gate, or entry door opener, home or office lighting, you need to be at the same location as the device. Note: Garage door openers (manufactured after 1996) have “rolling code protection”. To pro- gram a garage door opener equipped with “rolling code protection”; you will need to use a ladder to get up to the garage door opener motor to be able to access the “smart or learn” program button.SIC3612
SIC3613
1. To begin, push and hold the 2 outer HomeLink® buttons (to clear the memory) until the indicator light *A blinks (after 20
seconds). Release both buttons.2. Position the end of the hand-held transmitter 1 to 3 in (20 to 70 mm) away from the HomeLink® surface.
3. Using both hands, simultaneously push and hold both the HomeLink® button you want to program and the hand-held transmitter button. DO NOT release the buttons until step 4 has been completed.
4. Hold down both buttons until the indicator light on HomeLink® flashes, changing from a “slow blink” to a “rapid blink”. This could take up to 90 seconds. When the indicator light blinks rapidly, both buttons may be released. The rapidly flashing light indicates successful programming. To activate the garage door or other programmed device, push and hold the programmed HomeLink®
Instruments and controls 2-63
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (152,1)
NOTE:
If programming a garage door opener, etc., it is advised to unplug the device during the “cycling” process to prevent possible damage to the garage door opener com- ponents. OPERATING THE HomeLink® UNIVER- SAL TRANSCEIVER GUID-19BE850B-BBDC-470B-9850-DE6B57FF6B98
HomeLink® Universal Transceiver (once pro- grammed) may now be used to activate the garage door, etc. To operate, simply push the appropriate programmed HomeLink® Universal Transceiver button. The red indicator light will illuminate while the signal is being transmitted. PROGRAMMING TROUBLE-DIAGNO- SIS GUID-0B904713-E37A-46A3-9A90-63FADE14E79C If HomeLink® does not quickly learn the hand- held transmitter information:replace the hand-held transmitter batteries with new batteries. position the hand-held transmitter with its battery area facing away from the HomeLink® surface. push and hold both the HomeLink® and hand-held transmitter buttons without inter- ruption. position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink®
5.
button - releasing when the device begins to activate. If the indicator light on HomeLink® blinks rapidly for two seconds and then turns solid, HomeLink® has picked up a “rolling code” garage door opener signal. You will need to proceed with the next steps to train HomeLink®, completing the programming may require a ladder and another person for convenience.
If
6. Push and release the program button located on the garage door opener’s motor to activate the “training mode”. This button is usually located near the antenna wire that hangs down from the motor. the wire originates from under a light lens, you will need to remove the lens to access the training button. NOTE: Once you have pushed and released the training button on the garage door opener’s motor and the “training light” is lit, you have 30 seconds in which to perform step 7. For convenience, use the help of a second person to assist when performing this step.
7. Quickly (within 30 seconds of pushing and releasing the garage door opener training button) and firmly push and release the
2-64 Instruments and controls
HomeLink® button you’ve just programmed. Push and release the HomeLink® button up to three times to complete the training.
8. Your HomeLink® button should now be programmed. To program the remaining HomeLink® buttons for additional door or gate openers, follow steps 2 through 8 only.
NOTE:
Do not repeat step 1 unless you want to “clear” all previously programmed HomeLink® buttons. If you have any questions or are having difficulty programming your HomeLink® buttons, please to the HomeLink® web site at: www. refer homelink.com or call 1-800-355-3515. PROGRAMMING HomeLink® FOR CA- NADIAN CUSTOMERS GUID-8263D00C-5505-4CBD-9B5E-CB372155C17A Prior regulations required hand-held transmitters to stop transmitting after 2 seconds. To program your hand-held trans- mitter to HomeLink®, continue to push and hold the HomeLink® button (note steps 2 through 4
under “Programming HomeLink®”) while you push and re-push (“cycle”) your hand-held transmitter every 2 seconds until the indicator light flashes rapidly (indicating successful pro- gramming).to 1992, D.O.C.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (153,1)
may not cause harmful interference, and (2) this device must accept any interfer- ence received, including interference that may cause undesired operation.
Note: Changes or modifications not ex- pressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For Canada:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: this device may not cause interference, and (2) this device must accept any interfer- ence, including interference that may cause undesired operation of the device.
(1)
surface. Hold the transmitter in that position for up to 15 seconds. If HomeLink® is not programmed within that time, try holding the transmitter in another position - keeping the indicator light in view at all times.
If you continue to have programming difficulties, please contact the NISSAN Consumer Affairs Department. The phone numbers are located in the Foreword of this Owner’s Manual. CLEARING THE PROGRAMMED IN- FORMATION GUID-8C1871E3-C252-465F-A399-47B1EB58E018
Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20
seconds). REPROGRAMMING A SINGLE HomeLink® BUTTON GUID-2BF52974-A0FA-4080-821F-2E188B5DC58B To reprogram a HomeLink® Universal Transcei- ver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed.2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 2 to 5 in (50 to 127
mm) away from the HomeLink® surface.3. Push and hold the hand-held transmitter
button.
4. The HomeLink® indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.
The HomeLink® Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLink® button that was just programmed. This proce- dure will not affect any other programmed HomeLink® buttons. IF YOUR VEHICLE IS STOLEN GUID-464C8E7D-4693-445C-BEED-4B9B07479827
If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink®. Consult the Owner’s Manual of each device or call the manufacturer or dealer of those devices for additional information. When your vehicle is recovered, you will need to reprogram the HomeLink® Univer- sal Transceiver with your new transmitter information.FCC Notice:
For USA:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-65
Black plate (154,1)
MEMO
2-66 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
3 Pre-driving checks and adjustments
Black plate (155,1)
Keys ...
Doors ...
Intelligent Key system ...
Intelligent Key system ... Mechanical key ... Valet hand-off
.............................................................................................. 3-3
......................................................... 3-3
.................................................................... 3-4
... ....................................................................... 3-5
............................................................................................ 3-5
............................................ 3-5Locking with mechanical key ... Opening and closing windows with the mechanical key ... Locking with inside lock knob ... Locking with power door lock switch ... Automatic door locks ... Child safety rear door lock (Hardtop models)
Intelligent Key operating range ... Door locks/unlocks precaution ... Intelligent Key operation ... Battery saver system ... Warning signals ... Troubleshooting guide ...
..................................................................... 3-6
.......................................... 3-6
............................ 3-7
......................................................... 3-7
............. 3-8
.............................................................. 3-8
..................................... 3-10
..................................... 3-10
................................................. 3-11
....................................................... 3-14
................................................................ 3-14
..................................................... 3-15
............................................. 3-16
.................. 3-17
.......................................................................................... 3-20
.................................................. 3-20
............................................. 3-21
... ............... 3-21Operating manual lift gate ... Operating power lift gate (if so equipped)
How to use remote keyless entry system ...
...
...
Hood ... Lift gate (Hardtop models)
Remote keyless entry system ...
Soft top (CrossCabriolet models)
Trunk lid (CrossCabriolet models)
...
Auto closure ... Lift gate release ...
Trunk lid release switch ... Trunk open request switch ... Trunk button ... Opening with key ... Trunk release power cancel switch ... Interior trunk lid release ...
.................................................................... 3-24
.............................................................. 3-25
.................................... 3-25
................................................ 3-25
.......................................... 3-26
.................................................................... 3-26
........................................................... 3-26
........................... 3-26
................................................ 3-27
.................................... 3-28
... .............................................. 3-28
............................................... 3-31
................................................................ 3-32
.................................................. 3-32
........................................ 3-33
............................................................. 3-33
............................................................... 3-34
............... 3-34
.................................................. 3-35
......... 3-36
.............. 3-41
........................................................................ 3-41
... ... ................................................ 3-41
.................................................................. 3-42Before operating the top ... When operating the top ... Luggage cover Soft top indicator light Automatic window lowering ... Opening the top ... Closing the top ... Opening the top using the intelligent key ... Troubleshooting guide ... If the top does not open or close electrically ... Care of the soft top and the vehicle body ...
Opening fuel-filler door Fuel-filler cap ...
...
...
Fuel-filler door
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Tilt/telescopic steering ...
Manual operation ... Electric operation ...
.......................................................... 3-44
.............................................................. 3-44
............................................................. 3-44
................................................................................ 3-45
................................................................ 3-45
................................................... 3-45Hardtop models ... CrossCabriolet models ...
Sun visors ...
Black plate (156,1)
...
Mirrors ...
Inside mirror Outside mirrors ... Vanity mirror
...................................................................................... 3-46
..................................................................... 3-46
............................................................... 3-47
..................................................................... 3-48
................... 3-49
................................. 3-49
.............................................................. 3-49
........................................................... 3-50Entry/exit function (if equipped) Memory storage ... System operation ...
Automatic drive positioner (if so equipped)
...
...
...
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (157,1)
KEYS
GUID-32E91F93-1BF6-407D-9C4D-E11C706B93DC A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate. A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by a NISSAN dealer.
SPA2406
SPA2865
Type A
Type C
Intelligent Key (2) Mechanical key (inside the key) (2) Key number plate (1)
1. 2. 3. INTELLIGENT KEY SYSTEM GUID-64550E60-3C68-49DC-B450-6EF37FA5B9C2
Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key system components and NISSAN Vehicle Immobilizer System compo- nents. As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent Key system and NISSAN Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent Key compo- Pre-driving checks and adjustments 3-3SPA2431
Type B
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (158,1)
SPA2033
MECHANICAL KEY GUID-3D9FF77C-98B0-40A3-93C5-048839219F68
To remove the mechanical key, release the lock knob at the back of the key. To install the mechanical key, firmly insert it into the key until the lock knob returns to the lock position. Use the mechanical key to lock or unlock the doors and glove box, if they are equipped with a key cylinder. See “Doors” later in this section and “Storage” in the “2. Instruments and controls” section.— Do not change or modify the
Intelligent Key.
— Do not use a magnet key holder.
— Do not place the Intelligent Key near an electric appliance such as a television set, personal computer or cellular phone.
— Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function.
If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key. This will prevent the Intelligent Key from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please con- tact a NISSAN dealer.
nents when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.
CAUTION
. Be sure to carry the Intelligent Key with you when driving. The Intelli- gent Key is a precision device with a built-in transmitter. To avoid dama- ging it, please note the following.
— The Intelligent Key is water resistant; however, wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is com- pletely dry.
— Do not bend, drop or strike it
against another object.
— If the outside temperature is below 148F (−108C), the battery of the Intelligent Key may not function properly.
— Do not place the Intelligent Key for an extended period in a place where temperatures ex- ceed 1408F (608C).
3-4 Pre-driving checks and adjustments
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
DOORS
GUID-A6EDA02E-9855-47C0-A2E8-46DEBDFFD06C
CAUTION
WARNING
. Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders.
. Before opening any door, always look for and avoid oncoming traffic. . Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols. Unattended children could become involved in serious acci- dents.
Always carry the mechanical key in- stalled in the key.
VALET HAND-OFF GUID-EFC63B4C-0F15-4531-AA8B-ACA78CB96860
When you have to leave a key with a valet, give them the Intelligent Key itself after removing the mechanical key to protect your belongings. To prevent the glove box or the trunk (Cross- Cabriolet models) from being opened during valet hand-off, follow the procedures below. 1. Push the trunk release power cancel switchto the OFF side (CrossCabriolet models).
2. Remove the mechanical key from the In-
telligent Key.
3. Lock the glove box with the mechanical key. 4. Hand the Intelligent Key to the valet, keeping the mechanical key in your pocket or bag. Insert the mechanical key into the Intelligent Key when you retrieve your vehicle.
See glove box and “Storage” in the “2. Instru- ments and controls” section and “Trunk lid (CrossCabriolet models)” later in this section.
Black plate (159,1)
SPA2432
LOCKING WITH MECHANICAL KEY GUID-E8E0764D-7E38-467C-AB80-1609CF8DDD47
The power door lock system allows you to lock or unlock all doors simultaneously using the mechanical key.Hardtop models
GUID-0BFF314E-455C-4A8A-9BCF-B9DF3F2390B1
Turning the driver’s door key cylinder to the front of the vehicle *1 will lock all doors. Turning the driver’s door key cylinder once to the rear of the vehicle *2 will unlock the driver’s door. After returning the key to the neutral position *3 , turning it to the rear again within 5 seconds will unlock all doors.[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Pre-driving checks and adjustments 3-5
Black plate (160,1)
key. (See “Remote keyless entry system” later in this section.) To close the windows, turn the driver’s door key cylinder to lock for longer than 1 second. The door is locked and the window keeps closing while turning the key.
Crosscabriolet models
GUID-E42A3CA3-AD22-4044-A8E7-1CE5A91D11A8
Turning the driver’s door key cylinder to the rear of the vehicle *2 will lock all doors. Turning the driver’s door key cylinder once to the front of the vehicle *1 will unlock the driver’s door. After returning the key to the neutral position *3 , turning it to the front again within 5 seconds will unlock all doors.Models with color display: You can switch the lock system to the mode that allows you to open all the doors when the key is turned once. (See “How to use SETTING button” in the “4. Monitor, heater, air conditioner, audio, phone and voice recognition systems” section.) OPENING AND CLOSING WINDOWS WITH THE MECHANICAL KEY GUID-5CA6B107-CCEF-4728-83E6-1D0247152077
The driver’s door key operation also allows you to open and close the window that is equipped with the automatic open/close function. (See “Power windows” in the “2. Instruments and controls” section). To open the windows, turn the driver’s door key cylinder to unlock for longer than 1 second. The door is unlocked and the window keeps opening while turning the key. This function can also be performed by pushing and holding the door UNLOCK button of the3-6 Pre-driving checks and adjustments
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SPA2465
LOCKING WITH INSIDE LOCK KNOB GUID-280B5B43-891E-4CBE-9845-1698016E3BD4
To lock the door individually, move the inside lock knob to the lock position *1
then close the door. To unlock, move the inside lock knob to the unlock position *2 . When locking the door without Intelligent Key, be sure not to leave the Intelligent Key inside the vehicle.Black plate (161,1)
3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than 5
seconds.4. When activated,
the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).
switch to the unlock position *2 . Lockout protection GUID-BB47EDF9-3384-43BF-9799-EA35B33C1506
When the power door lock switch (driver or front passenger) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock automatically and a chime will sound after the door is closed. These functions help to prevent the Intelligent Key from being accidentally locked inside the vehicle. AUTOMATIC DOOR LOCKS GUID-FC92C800-B665-49FF-9CDE-4A1CBC7A147B . All doors will be locked automatically when the vehicle speed reaches 15 MPH (24
km/h).. All doors will be unlocked automatically when the ignition switch is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position.
SPA2300
LOCKING WITH POWER DOOR LOCK SWITCH GUID-DB03598A-E334-478D-9F87-2864156F8581
Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver’s and front passenger’s door armrests. To lock the doors, push the power door lock switch to the lock position *1 with the driver’s or front passenger’s door open, then close the door. When locking the door this way, be certain not to leave the Intelligent Key inside the vehicle. To unlock the doors, push the power door lock[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Pre-driving checks and adjustments 3-7
Black plate (162,1)
INTELLIGENT KEY SYSTEM
GUID-A26B93CD-32CF-44F2-8707-5F0887B9E015
WARNING
CAUTION
. Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight.
The Intelligent Key system can operate all the door (including the lift gate) and the trunk lid locks using the remote keyless function or pushing the request switch on the vehicle without taking the key out from a pocket or purse. The operating environment and/or condi- tions may affect the Intelligent Key system operation. Be sure to read the following before using the Intelligent Key system.
. Be sure to carry the Intelligent Key with you when operating the vehi- cle.
. Never leave the Intelligent Key in the vehicle when you leave the vehicle.
The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions. . When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broad- casting station.
. When in possession of wireless equipment, transceiver,
such as a cellular telephone, and CB radio.
. When the Intelligent Key is in contact with or
covered by metallic materials.
. When any type of radio wave remote control
is used nearby.
. When the Intelligent Key is placed near an electric appliance such as a personal
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SPA2433
CHILD SAFETY REAR DOOR LOCK (Hardtop models) GUID-02E4EA0C-4602-4E41-993C-FC56ED415767
The child safety rear door locks help prevent doors from being opened accidentally, espe- cially when small children are in the vehicle. When the levers are in the lock position *1 , the rear doors can be opened only from the outside. To disengage, move the levers to the unlock position *2 .3-8 Pre-driving checks and adjustments
Black plate (163,1)
. Do not place the Intelligent Key near equipment that produces a mag- netic field, such as a TV, audio equipment, personal computer or cellular phone.
If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of
