2012 Nissan Murano Owners Manual

Download PDF Manual
SAA2517 Automatic Recording: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When this item is turned on, the Music Box® hard drive/flash memory automatically starts recording when a CD is inserted. Delete Songs from Music Box: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Deletes the current song, selected songs or albums by choosing from the list, or all songs/ albums in the Music Box®. Recording Quality: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Set the recording quality of 105 kbps or 132 kbps. The default is set to 105 kbps (models with navigation system). Set the recording quality of 96 kbps, 128 kbps or 192 kbps. The default is set to 128 kbps (models without navigation system). End-User License Agreement USE OF THIS PRODUCT IMPLIES ACCEP- TANCE OF THE TERMS BELOW. Gracenote® MusicID® Terms of Use This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this appli- cation to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Grace- note Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-77 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Models without navigation system SAA2438 Black plate (284,1) to assign, copy, and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not transfer or transmit the Gracenote Software or any Grace- note Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACE- NOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license termi- nates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Soft- ware, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identi- fier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Grace- note service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no representations or warran- ties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or functioning of Gracenote Software or Gracenote Servers will be unin- terrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTI- CULAR PURPOSE, TITLE, AND NON-INFRIN- G E M E N T. G R A C E N OT E D O E S N OT that 4-78 Monitor, heater, air conditioner, audio, phone and voice recognition systems WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACE- NOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. Copyright: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Music recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technol- ogy and related content delivery. For more information, please visit www.gracenote.com. CD and music-related data from Gracenote, Inc., copyright *C 2000-2009 Gracenote. Gracenote Software, copyright *C 2000-2009 Gracenote. This product and service may practice one or more of the following U.S. P a t e n t s : # 5 , 9 8 7 , 5 2 5 ; # 6 , 0 6 1 , 6 8 0 ; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent: #6,304,523. Gracenote and CDDB are registered trade- marks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote. [ Edit: 2011/ 7/ 18 Model: Z51-D ] . Red - right channel audio input Before connecting a device to a jack, turn off the power of the portable device. With a compatible device connected to the jacks, push the DISC·AUX or AUX button repeatedly until the display switches to the AUX mode. Black plate (285,1) Models with navigation system SAA2496 Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-79 Models without navigation system SAA1567 [ Edit: 2011/ 7/ 18 Model: Z51-D ] SAA3342 AUXILIARY INPUT JACKS (if so equipped) GUID-031E6845-355E-4B94-AB0A-BC5D7A96E419 The auxiliary input jacks are located in the center console. NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary jacks. Compatible audio devices, such as some MP3 players, can also be connected to the system through the auxiliary jacks. The auxiliary jacks are color coded for identifica- tion purposes. . Yellow - video input . White - left channel audio input Black plate (286,1) . A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. USB memory GUID-0EB7000F-0BEB-4820-848A-B72225B4910E . Never touch the terminal portion of the USB memory. . Do not place heavy objects on the USB memory. . Do not store the USB memory in highly humid locations. . Do not expose the USB memory to direct sunlight. . Do not spill any liquids on the USB memory. Refer to the USB memory Owner’s Manual for the details. AUX Menu GUID-281DDB8B-E18B-41B6-9B6D-F3679632BC95 When the “Menu” key on the display is selected while in the AUX mode, the menu screen will be displayed. Display Mode: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Choose the display mode from the following items. . Normal . Wide . Cinema Volume Settings (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Choose the volume setting from the following items. . Medium . High Low Display (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Adjust the image quality of the screen, select the preferred adjustment items. SAA0451 CD/DVD/USB MEMORY CARE AND CLEANING GUID-D99C5681-CCB2-4546-A032-DDF98A984F2C CD/DVD GUID-76BF0595-4A07-4E1D-8EC4-AE66DFAB6A04 . Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the disc. . Always place the discs in the storage case when they are not being used. To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. Do not use a conventional record cleaner or alcohol intended for industrial use. 4-80 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (287,1) STEERING-WHEEL-MOUNTED CON- TROLS FOR AUDIO (if so equipped) GUID-22E2AF45-BCF1-486C-9E1E-D414FA4A5EDE Menu control switch (models with navi- gation system) or audio tuning switch (models without navigation system) GUID-E19332CA-2DD3-40B8-A8C1-5572B6D8E8E7 While the display is showing a MAP (navigation systems only), STATUS or Audio screen, tilt the switch upward or downward to select a station, track, CD or folder. For most audio sources, tilting the switch up/down for more than 1.5 seconds provides a different function than tilting up/down for less than 1.5 seconds. AM and FM radio: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the preset stations. Tilting up/down for more than 1.5 seconds will seek up or down to the next station. With navigation system Without navigation system SAA1854 . Pushing the menu control switch will show SAA1855 the list of preset stations. 1. 2. 3. 4. Source select switch Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) Volume control switch BACK switch XM Satellite Radio: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the preset channels. Tilting up/down for more than 1.5 seconds will go to the next or previous category. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-81 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (288,1) Volume control switches GUID-EB0D7B9F-6B05-45AE-9781-0D587A85C8F6 Push the upper (+) or lower (−) side switch to increase or decrease the volume. Source select switch GUID-39EFE205-E1D7-4D56-AEC0-06037C87BC14 Push the audio source switch to change the mode as follows. . Models with navigation system AM ? FM ? XM ? CD/DVD ? Music Box® ? USB/iPod® ? Bluetooth® Audio . Models without navigation system AM ? FM ? CD ? Music Box® ? USB/ iPod® ? XM Media not connected/inserted will be skipped. . Pushing the menu control switch will show the XM Menu. Tilting up/down for more than 1.5 seconds will skip up or down through the folders. iPod®: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the tracks. . Pushing the menu control switch will show the iPod Menu. CD: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the tracks. Tilting up/down for more than 1.5 seconds will skip up or down through the folders (if playing compressed audio files). . Pushing the menu control switch will show the CD Menu. DVD (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the tracks. Tilting up/down for more than 1.5 seconds will skip up or down through the titles. . Pushing the menu control switch will select an item from the DVD display. . When the transparent operation menu ap- pears, the switch will control the menu. USB: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the tracks. . Pushing the menu control switch will show the USB Menu. Music Box®: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the tracks. Tilting up/down for more than 1.5 seconds will skip up or down through the albums (folders) number (if playing compressed audio files). . Pushing the menu control switch will show the Music Box® Menu. Bluetooth® Audio (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Tilting up/down for less than 1.5 seconds will skip up or down through the tracks. BACK switch (models with navi- gation system) GUID-D26A857B-F9ED-42BC-B015-30869C5C67C8 Push this switch to go back to the previous screen or cancel is not completed. the selection if it 4-82 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (289,1) CAUTION To avoid damaging or deforming the antenna, be sure to remove the antenna under the following condi- tions. — The vehicle enters an automatic car wash (for Hardtop models). — The vehicle enters a garage with a low ceiling. — The vehicle is covered with a car cover. . Always properly tighten the antenna rod during installation. Otherwise, the antenna rod may break during vehicle operation. ANTENNA GUID-5D62EC7D-99A1-4040-9B31-8ACB3AC0CE76 Window antenna (for Hardtop models) GUID-CB119597-8559-44D0-B2B0-9B0667D091D0 The antenna pattern is printed inside the rear window. CAUTION . Do not place metalized film near the rear window glass or attach any metal parts to it. This may cause poor reception or noise. . When cleaning the inside of the rear window, be careful not to scratch or damage the rear window antenna. Lightly wipe along the antenna with a dampened soft cloth. SAA2102 Roof antenna (for Hardtop models) and trunk mounted antenna (for CrossCab- riolet models) GUID-8AAFB5F9-D133-44F8-9018-430C3B61453D GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Removing the antenna: You can remove the antenna if necessary. Hold the bottom of the antenna and remove by turning counterclockwise. To install the antenna, turn the antenna clock- wise and tighten. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-83 [ Edit: 2011/ 7/ 18 Model: Z51-D ] CAR PHONE OR CB RADIO GUID-2FDA1809-0AE0-4716-B007-03F1D8BBE2C5 When installing a car phone or a CB radio in your vehicle, be sure to observe the following cautions, otherwise the new equipment may adversely affect the electronic control modules and electronic control system harness. WARNING . A cellular phone should not be used for any purpose while driving so full attention may be given to vehicle operation. Some jurisdictions prohi- bit the use of cellular phones while driving. If you must make a call while your vehicle is in motion, the hands-free cellular phone operational mode (if so equipped) is highly recom- mended. Exercise extreme caution at all times so full attention may be given to vehicle operation. If a conversation in a moving vehicle requires you to take notes, pull off the road to a safe location and stop your vehicle before doing so. Black plate (290,1) Bluetooth® HANDS-FREE PHONE SYSTEM (models with navigation system) GUID-046E2123-C218-461B-98FE-4E62F9A355CF CAUTION WARNING . Keep the antenna as far away as possible from the electronic control modules. . Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness. . Adjust the antenna standing-wave ratio as recommended by the man- ufacturer. . Connect the ground wire from the CB radio chassis to the body. . For details, consult a NISSAN deal- er. . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so. CAUTION To avoid draining the vehicle battery, use a phone after starting the engine. Your NISSAN is equipped with Bluetooth® Hands-Free Phone System. If you are an owner of a compatible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless tech- nology, you can make or receive a telephone call with your cellular phone in your pocket. 4-84 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Once a cellular phone is connected to the in- vehicle phone module, no phone connecting procedure is required anymore. Your phone is automatically connected with the in-vehicle phone module when the ignition switch is pushed to the ON position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth® cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time. The NISSAN Voice Recognition system sup- ports the phone commands, so dialing a phone number using your voice is possible. For more details, see “NISSAN voice recognition system (models with navigation system)” later in this section; page 4-108. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. . Wireless LAN (Wi-Fi) and the Bluetooth® functions share the same frequency band (2.4 GHz). Using the Bluetooth® and the wireless LAN functions at the same time may slow down or disconnect the communica- tion and cause undesired noise. is recommended that you turn off the wireless LAN (Wi-Fi) when using the Bluetooth® functions. It . Set up the wireless connection between a compatible cellular phone and the in-vehicle phone module before using the Bluetooth® Hands-Free Phone System. . Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module. Please visit www.nissanusa.com/bluetooth for a recom- mended phone list. . You will not be able to use a hands-free phone under the following conditions: — Your vehicle is outside of the telephone service area. — Your vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall building or in a mountainous area. — Your cellular phone is locked in order not to be dialed. . When the radio wave reception is not ideal it may be or ambient sound is too loud, difficult for the other party to hear your voice during a call. Please close the windows if possible. Immediately after pushed to the ON position, impossible to receive a call period of time. the ignition switch is it may be for a short Black plate (291,1) . Do not place the cellular phone in an area surrounded by metal or far away from the in- vehicle phone module to prevent tone quality degradation and wireless connection dis- ruption. . While a cellular phone is connected through the the cellular phone may the Bluetooth® wireless connection, battery power of discharge quicker than usual. If the Bluetooth® Hands-Free Phone System seems to be malfunctioning, please visit www.nissanusa.com/bluetooth for trouble- shooting help. . Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. . Refer to the cellular phone Owner’s Manual regarding the telephone pairing procedure specific to your phone, battery charging, cellular phone antenna, etc. The antenna display on the monitor will not coincide with the antenna display of some cellular phones. . Keep the interior of the vehicle as quiet as possible to hear the caller’s voice clearly as well as to minimize its echoes. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-85 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (292,1) SAA3556 CONTROL BUTTONS 1. PHONE button 2. TALK /PHONE SEND button GUID-D680FAE6-FA84-4969-8AAB-FFD5526FA772 Bluetooth trademark: Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and li- censed to Clarion Co., Ltd. VOICE COMMANDS GUID-95F93972-653C-4AF6-9A16-78918A2B2EB1 You can use voice commands to operate various Bluetooth® Hands-Free Phone System features using the NISSAN Voice Recognition system. For more details, see “NISSAN voice recogni- tion system (models with navigation system)” later in this section; page 4-108. If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity. REGULATORY INFORMATION GUID-637CD407-3A96-45DC-9EC2-138DF3AB3D59 FCC Regulatory information GUID-980C0581-DEF4-49FF-B0B6-96D2C40F63F5 . CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. . Operation is subject to the following two 1. 2. conditions: this device may not cause interference and this device must accept any interference, including interference that may cause un- desired operation of the device IC Regulatory information GUID-01079428-1F15-46E5-849E-359B827B5F0D . Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. 4-86 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (293,1) PHONE SELECTION GUID-8BA5FDCF-9589-4449-AFFB-E0894E8FE4FA Up to 5 cellular phones can be registered to the system. To switch to connect another cellular phone, push PHONE button and select the “Connected Phones” key. The registered cellular If you select a phones are shown on the list. cellular phone that is different from the one currently connected, the newly selected phone will be connected to the system. VEHICLE PHONEBOOK GUID-68E4156D-4E14-426F-984D-7A594DCD82E8 This vehicle has two phonebooks available for hands-free use. Depending on the phone, the system may automatically download the entire cell phone’s phonebook into the “Handset Phonebook”. For the details about downloading a phonebook, see “Phone setting” later in this section. If a phonebook does not automatically download, the vehicle phonebook may be set for up to 1,000 entries. This phonebook allows the recording of a name to speak while using voice recognition. SAA2519 SAA2520 CONNECTING PROCEDURE 1. Push the PHONE button or the GUID-9BEACCEF-0959-46FA-A2F0-DCD12A86A6F3 button, and select the “Connect Phone” key. 2. When a PIN code appears on the screen, operate the compatible Bluetooth® cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for the details. You can also visit www.nissanusa.com/bluetooth or call NISSAN Consumer Affairs Department for instructions on pairing NISSAN recom- mended cellular phones. When the connection process is completed, the screen will return to the Phone menu display. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-87 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (294,1) SAA2521 SAA2522 SAA2523 1. Push the PHONE button and select the “Vehicle Phonebook” key. 2. Select the “Add New” key at the top of the 3. Choose the method for entering the phone- book entry. For this example, select “Enter Number by Keypad”. 5. Select the “Voicetag” key to record a name to speak when using the NISSAN Voice Recognition system. screen. 4. Enter the digits and select the “OK” key. (See “How to use touch screen (models with navigation system)” earlier in this section.) 6. Select the “Store” key and prepare to speak the name after the tone. 7. When the voicetag is successfully saved, select the “OK” key to save the phonebook entry. 4-88 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] There are different methods to input a phone number. Select one of the following options 8. After the phonebook entry is saved, it will show a screen that the number. Press the BACK button to return to the Vehicle Phonebook. is ready to call instead of “Enter Number by Keypad” in step 3. . Copy from Call History incoming, The system will show a list of outgoing or missed calls that were down- loaded from the connected cellular phone (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook. . Copy from the Handset The system will show the connected cellular phone’s phonebook that was downloaded (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook. Black plate (295,1) SAA2620 SAA2523 Editing the Vehicle Phonebook 1. Push the PHONE button and select GUID-38365816-D70D-4632-A234-FBF33135EF7E the “Vehicle Phonebook” key. 2. Select the desired entry from the displayed list. 3. Select the “Edit” key. 4. Select the desired item to change. The following editing items are available: . Entry # Changes the displayed number of selected entry. the . Name Edit the name of the entry using the keypad displayed on the screen. . Number Edit the phone number using the keypad displayed on the screen. Type Select an icon from the icon list. . Voicetag Confirm and store the voicetag. Voicetags Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-89 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (296,1) allow easy dialing using the NISSAN Voice Recognition system. (See “NISSAN voice recognition system (models with navigation system)” later in this section.) To delete an entry, select the “Delete” key at step 3. SAA2524 SAA2621 GUID-268C7F12-43F5-442D-8D30-D077AC39D5F3 MAKING A CALL To make a call, follow this procedure. 1. Push the PHONE button on the instrument panel or the button on the steering wheel. The “PHONE” screen will appear on the display. 2. Select the “Handset Phonebook” key on the “PHONE” menu. 3. Select the desired entry from the list. 4. Confirm the correct entry by selecting for the correct number from the list. 5. Select the “Call” key to start dialing the number. There are different methods to make a call. Select one of the following options instead of “Handset Phonebook” in step 2 above. . Vehicle Phonebook Select an entry stored in the Vehicle’s Phonebook. . Call History Select an outgoing, incoming or missed call downloaded from your cell phone (depend- ing on your phone’s compatibility). . Dial Number Input the phone number manually using the 4-90 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] keypad displayed on the screen. (See “How to use touch screen (models with navigation system)” earlier in this section.) Black plate (297,1) . Hold Call Put an incoming call on hold. . Reject Call Reject an incoming call. To finish the call, perform one of following procedures listed below. the 1. Select the “Hang up” key. 2. Push the PHONE button on the instrument panel. 3. Push the button on the steering wheel. SAA2525 RECEIVING A CALL GUID-42653916-6D28-452E-955E-41B0F21185E9 When you hear a phone ring, the display will change to the incoming call mode. To receive a call, perform one of the following procedures listed below. 1. Select the “Answer” key. 2. Push the PHONE button on the instrument panel. 3. Push the button on the steering wheel. There are some options available when receiving a call. Select one of the following displayed on the screen. . Answer Accept an incoming call to talk. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-91 [ Edit: 2011/ 7/ 18 Model: Z51-D ] . Cancel Mute This will appear after “Mute” is selected. Mute will be canceled. . Switch Call* Select "Switch Call" to answer another incoming call. By selecting “Hang up”, you can end a call and can speak to a caller who is on hold again. * This function may not be usable, depend- ing on the model of phone. To adjust the person’s voice to be louder or quieter, push the volume control switch (+ or −) on the steering wheel or turn the volume control knob on the instrument panel while talking on the phone. This adjustment is also available in the SETTING mode. Black plate (298,1) SAA2527 PHONE SETTING GUID-D54425C1-1203-405E-B905-91EAE449EB16 To set up the Bluetooth® Hands-Free Phone System to your preferred settings, push the SETTING button on the instrument panel and select the “PHONE” key. Edit Vehicle Phonebook GUID-21A81C5C-FE0F-4748-BF7D-BEDE2E950243 To edit the vehicle phonebook, use the same procedure as described in “Vehicle phonebook” earlier in this section. SAA3587 DURING A CALL GUID-D5E534B4-79AD-47EE-A712-C875FB7D0D2E There are some options available during a call. Select one of the following displayed on the screen if necessary. . Hang up Finish the call. . Use Handset Transfer the call to the cellular phone. . Mute Mute your voice to the person. . Keypad Using the touch tone, send digits to the connected party for using services such as voicemail. 4-92 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (299,1) Auto Download GUID-E06F2D7C-62BE-4F19-B524-E8D96A701FD2 When this item is activated, the phonebook of a hands-free phone is automatically downloaded at the same time that the hands-free phone is connected. Delete Phonebook GUID-B23F862F-A65E-4F95-84BC-9789833A1AA6 The vehicle phonebook entries can be deleted all at the same time or one by one. Download Handset Phonebook GUID-AE3AE8DD-860B-4FC7-8661-BD338EBFDC9F Download the contacts registered in a Blue- tooth® cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies according to each cellular phone. See cellular phone Owner’s Manual for details. Volume GUID-7FCE50D7-0C2F-486D-8F1D-A438FEC3D023 The following kinds of phone volume can be set. Pushing the PHONE button and selecting the “Volume” key can also operate the same settings. . Ringtone/Incoming Call/Outgoing Call To increase or decrease the volume, select the “Ringtone”, “Incoming Call” or “Out- going Call” key and adjust it with the multi- function controller. . Automatic Hold When this function is activated, an incoming phone call is automatically held. . Vehicle Ringtone When this function is activated, a specific ringtone that is different from the cellular phone will sound when receiving a call. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-93 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (300,1) TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. GUID-641DC97D-3665-4758-84C7-C9304D0F4562 Symptom Solution System fails to interpret the command correctly. The system consistently selects the wrong voicetag. The system cannot be operated. 1. Ensure that the command is valid. (See “NISSAN voice recognition system (models with navigation system)” later in this section; page 4-108.) 2. Ensure that the command is spoken after the tone. 3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle. 4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized. 5. If more than one command was said at a time, try saying the commands separately. 1. Ensure that the voicetag requested matches what was originally stored. (See “Vehicle phonebook” earlier in this section.) 2. Replace one of the names being confused with a new name. Close the soft top (for CrossCabriolet models). 4-94 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Bluetooth® HANDS-FREE PHONE SYSTEM (models without navigation system) (if so equipped) GUID-2E3BF6A6-4523-4285-8F92-0F4C9B6526E1 WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so. CAUTION To avoid draining the vehicle battery, use a phone after starting the engine. Your vehicle is equipped with Bluetooth® Hands-Free Phone System. If you are an owner of a Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology, you can make or receive a telephone call with your cellular phone in your pocket. Once your cellular phone is paired to the in- vehicle phone module, no phone connecting procedure is required. Your phone is automati- cally connected with the in-vehicle phone module when the ignition switch is pushed to the “ON” position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth® cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time. When a call is active, the audio system and microphone (located in the ceiling in front of the rearview mirror) are used for the handsfree communications. If the audio system is being used at the time, the audio mode will mute and will stay muted until the active call is ended. The NISSAN Voice Recognition system sup- ports the phone commands, so dialing a phone number using your voice is possible. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. . Wireless LAN (Wi-Fi) and the Bluetooth® functions share the same frequency band (2.4 GHz). Using the Bluetooth® and the wireless LAN functions at the same time may slow down or disconnect the communica- tion and cause undesired noise. is It Black plate (301,1) recommended that you turn off the wireless LAN (Wi-Fi) when using the Bluetooth® functions. . Set up the wireless connection between a cellular phone and the in-vehicle phone module before using the Bluetooth ® Hands-Free Phone System. . Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module. . You will not be able to use a hands-free phone under the following conditions: — Your vehicle is outside of the telephone service area. — Your vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall building or in a mountainous area. — Your cellular phone is locked in order not to be dialed. . When the radio wave condition is not ideal it may be to hear the other person’s voice or ambient sound is too loud, difficult during a call. the ignition switch is Immediately after it may be pushed to the “ON” position, impossible to receive a call for a short period of time. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-95 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (302,1) IC Regulatory information GUID-E1B77E88-A855-4E2C-B642-6ECCDD8F6A9E . Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. Bluetooth trademark: Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and li- censed to Visteon Corporation. volume may improve the clarity. This wireless hands free car kit is based on Bluetooth® technology, — Frequency: 2402 MHz - 2480 MHz — Output Power: 4.14 dBm E.I.R.P — Modulation: FHSS GFSK 8DPSK, p/ 4DQPSK — Number of Channel: 79 — This wireless equipment can’t be used for any services related to safety because there is the possibility of radio interfer- ence. REGULATORY INFORMATION GUID-9DE078EF-726D-49EF-B39D-BF1565AB6772 FCC Regulatory information GUID-FE63010D-70A5-414E-BEF2-21944E3AAE2E . CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. . Operation is subject to the following two conditions: 1) 2) this device may not cause interference and this device must accept any interference, including interference that may cause undesired operation of the device . Do not place the cellular phone in an area surrounded by metal or far away from the in- vehicle phone module to prevent tone quality degradation and wireless connection dis- ruption. . While a cellular phone is connected through the the cellular phone may the Bluetooth® wireless connection, battery power of discharge quicker than usual. If the Bluetooth® Hands-Free Phone System seems to be malfunctioning, please contact a NISSAN dealer. . Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. . Refer to the cellular phone Owner’s Manual regarding the telephone pairing procedure specific to your phone, battery charging, cellular phone antenna, etc. The antenna display on the monitor will not coincide with the antenna display of some cellular phones. . Keep the interior of the vehicle as quiet as possible to hear the caller’s voice clearly as well as to minimize its echoes. If reception between callers is unclear, adjusting the incoming or outgoing call 4-96 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] VOICE RECOGNITION SYSTEM GUID-9B7C908B-6C37-4AF6-881B-ED74B9733676 You can also use the Bluetooth® hands-free phone system with Voice Recognition System. INFO The available voice commands are only applicable to the relevant language set in the LANGUAGE setting screen. (See “How to use SETTING button” earlier in this section.) If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation. The voice recognition system cannot be operated when the soft top (CrossCabriolet models) is open. Manual command selection GUID-7A9C0620-4464-41D4-A48F-87414C8E0577 Commands can be selected manually. While the commands are displayed on the screen, select a command by operating the Tune switch, and then push the PHONE SEND button. Once a command is manually selected, the voice command function is cancelled. To return to voice command mode, push the PHONE END button to cancel the current operation, and then perform the first procedure of voice command. SAA1858 CONTROL BUTTONS 1. PHONE SEND button GUID-97C1E7DF-2E99-4A06-9A42-9D6CE21376A6 Push the button to initiate a VR session or answer an incoming call. You can also use the button to skip through system feedback and to enter commands during a call. 2. PHONE END button Push the button to cancel a VR session or end a call. Black plate (303,1) Using system GUID-971AC84E-9C3B-4FD1-B89A-CAAB5B8FF18C Initialization: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the ignition switch is pushed to the ON position, Voice Recognition System is initialized, which may take up to one minute. When completed, the system is ready to accept voice commands. switch on the steering wheel is pushed before the initialization com- pletes, the system will not accept any command. If the Before starting: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 To get the best performance out of the Voice Recognition System, observe the following: . Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands cor- rectly. . Wait until a tone sounds before speaking a command. . Speak a voice command within 5 seconds after the beep sound. If no voice command the system will ask you for a is given, number. If no further command is given, the session ends. . Speak in a natural voice without pausing between words. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-97 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (304,1) 4. The system acknowledges the command and announces the next set of available commands. 5. After the tone sounds, speak the phone number. 6. When you have finished speaking the phone the system repeats it back and number, announces the available commands. 7. After system responds, speak “Dial” and the system dials the spoken numbers. Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . Voice commands cannot be accepted when the command is not the icon is If the system announces, “Please say again”. Repeat the command in a clear voice. recognized, . Push the switch or the BACK button once to return to the previous screen. If you want to cancel the command, push the switch. The message “Voice input is canceled” will be announced. If you want to adjust the volume of the system feedback, push the volume control buttons [+] or [−] on the steering wheel or use the audio system volume knob while the system is making an announcement. SAA1858 SAA2574 Giving voice command: 1. Push and release the GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 switch located on the steering wheel. 2. A list of commands appears on the screen, and the system announces, “Please say a command after the beep. Available com- mands are: Call, Phonebook, Recent Calls, Connect Phone or Help”. to 3. After the tone sounds and the icon on the screen changes from , speak a command. See the “Using system” later in this section for the voice command list. Speak “Call” for example. INFO Voice commands cannot be recognized as long as the screen icon is not in the command recognition mode 4-98 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (305,1) is classified as one in the phonebook. If the system cannot understand your command, repeat it according to the re- commendations mentioned in “Using sys- tem” earlier in this section. If the given name (voice tag) is correct, the phone system will dial the number registered for “John”. 4. INFO To end the voice command phase at any stage of the procedure, push the switch once in order to activate the cancel command. How to speak commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The Voice Recognition System requires a certain way to speak voice commands. Speak the normally and clearly in the direction of microphone (located in front of the rearview mirror). Every digit of the number must be spoken individually and in a normal manner. The hands-free mode will work best when the telephone number is spoken in blocks of three to five digits. After each spoken block is termi- nated, the system will repeat the three to five digits and wait for you to speak the next digit or block of digits required for the telephone number. See “Using system” later in this section for the appropriate commands that can be spoken for the hands-free mode system. Example: In order to initiate a call, speak “Phonebook”. INFO If you are controlling the telephone system by voice command for the first time or do not know the appropriate voice command, speak “Help”. The system announces the available commands. . When you speak numbers, you can speak both “zero” or “oh” for “0”. Personal vocabulary (voicetags): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Voice Recognition System is equipped with the function called “voicetags”, which can be associated with the phone number and name in the phonebook. Using the voice tag will automatically generate a speed dial to the registered number. See “Phonebook registration” earlier section. You can call the identified number using the following command: “Dial” followed by the voice tag. in this Dialling a name with a voice tag: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 It is possible to call up a name via a voice tag instead of a number, provided the name and number of your correspondent has been pre- viously stored in the phonebook. Dial via a voice tag, according to the following procedure. 1. Push the 2. The system replies “please say a command after the beep. Available commands are: Call, Phonebook, Recent Calls, Connect Phone or Help”. switch. 3. Give your instructions to the system by saying: “Dial John” for example (“John” must have been previously set as a voice tag for John’s phone number) or “Dial One” if John Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-99 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (306,1) List of voice commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 COMMAND “Call/Dial” “” “Call/Dial” “Redial” “Call” "Number"“” “Phonebook” “” “Phonebook” “List Names” “Phonebook” “Transfer Entry” “Phonebook” “Delete Entry” “Connect Phone” “Add Phone” “Connect Phone” “Select Phone” “Connect Phone” “Delete Phone” “Connect Phone” “Bluetooth Off” “Connect Phone” “Replace Phone” “Connect Phone” “Delete Phone” “All Phones” “Connect Phone” “Delete Phone” “List Phones” ACTION Dials the specified . Dials the last number. Dials the specified . Displays the specified in the phonebook. Displays all the names in the phonebook. Transfers the phonebook data to the system. Deletes the phonebook registered in the system. Connects a cellular phone to the system. Selects a registered cellular phone. Deletes a registered cellular phone. Turns the Bluetooth® connection off. Changes the registered order of the cellular phones. Deletes all registered cellular phones. Selects a registered cellular phone and deletes it. 4-100 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (307,1) SAA2575 SAA2576 SAA2577 GUID-8FE25643-A97E-4548-872E-CB0777617257 PAIRING PROCEDURE Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the available com- mands. 2. Speak: “Connect Phone”. The system ac- knowledges the command and announces the next set of available commands. 3. Speak: “Add Phone”. The system acknowl- edges the command and asks you to initiate connecting from the phone handset. INFO: The Add Phone command is not available when the vehicle is moving. 4. When asked to enter a PIN code to connect a Bluetooth® cellular phone, enter the code “1234”. The code is always “1234” regardless of the number of phones paired. The connecting procedure of a cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for more information. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-101 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (308,1) SAA2578 SAA2579 SAA2580 5. The system asks the user to speak a name for the phone. Speak: “Yes”. The system acknowledges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again. Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells the user, then prompts the user for name again. logs and missed call PHONEBOOK REGISTRATION GUID-988012A4-F298-499C-94C3-CA027FD21350 When the cellular phone is connected to the in- vehicle module, the data stored in the cellular logs, phone such as phonebook, outgoing call incoming call logs is automatically transferred and registered to the system. The availability of this function depends on each cellular phone. The copying procedure also varies according to each cellular phone. See cellular phone Owner’s Manual for more infor- mation. Up to 1,000 phone numbers per registered cellular phone can be stored in the phonebook. 4-102 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] MAKING A CALL To make a call, follow the procedures below. 1. Push the button on the steering wheel. GUID-C1569C46-BBE4-417E-B708-C72FDA167413 A tone will sound. 2. Speak: “Call”. The system acknowledges the command and announces the next set of available commands. 3. Speak the registered person’s name. The system acknowledges the command and announces the next set of available com- mands. 4. Speak: “Yes”. The system acknowledges the command and makes the call. 5. Once the call has ended, press the button on the steering wheel. RECEIVING A CALL GUID-57B1C05B-C025-45A4-B4FF-608E19809C7D When the ring tone is heard, press the button on the steering wheel. Once the call has ended, press the button on the steering wheel. NOTE: To reject a call when the ring tone is heard, press the button on the steering wheel. Black plate (309,1) “Mute on/off” — Use the Mute command to mute the user’s voice so the other party cannot hear it. Use the mute command again to unmute the user’s voice. “Transfer Handset” — Use the Transfer Handset command to transfer the call from the Bluetooth® Hands-Free Phone System to a cellular phone when privacy is desired. The system announces, “Transfer Handset. The call is transferred to the handset only.” The system then ends the VR session. The Transfer Call command can also be issued again to return to a hands-free call through the vehicle. “Help” — The system announces the avail- able commands. NOTE: If the other party ends the call or the cellular phone network connection is lost while the Mute feature is on, the Mute feature may need to be reset to “off.” SAA2581 DURING A CALL GUID-CE0CDD4C-6CBD-4C98-8B4D-19A60317ACF1 During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter commands. “(digits)” — Use the Send command to enter numbers during a call. For example, if directed to dial an extension by an auto- mated system: Speak: “Sending one two three four.” The system acknowledges the command and sends the tones associated with the numbers. The system then ends the VR session and returns to the call. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-103 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Once the name and location are confirmed, the system begins the call. . Number When prompted by the system, speak the number to call. . Redial Use the Redial command to call the last number of outgoing calls. The system acknowledges the command, repeats the If a redial number and begins dialing. number does not exist, the system an- nounces, “There is no number to redial” and ends the VR session. . Callback Use the Callback command to call the last number in incoming calls. The system acknowledges the command, repeats the number and begins dialing. If an incoming the system call number does not exist, announces, “There is no number to call back” and ends the VR session. . Help The system announces the available com- mands. Black plate (310,1) SAA2583 GUID-C6D88EE2-4E10-450C-AF7B-CA5CCEC51006 Phonebook (a name) Use the name command to seek the name and locations registered in the phonebook in alphabetical order. When the system ac- knowledges the alphabet the user spoke, the system announces all registered names and locations beginning with that alphabet. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session. List Names Use the List Names command to hear the names and locations registered in the PHONE SETTINGS GUID-7D12ECFD-12D0-4255-AC95-BD224A6B95B9 SAA2582 Call GUID-C20D857F-9EF4-45A2-8963-CA14A72B48D5 (a name) If there are entries stored in the Phone Book, a number associated with a name and location can be dialed. See “Phone book registration” in this section to learn how to store entries. When prompted by the system, say the name of the phone book entry to call. The system acknowledges the name. If there are multiple locations associated with the name, the system asks the user to choose the location. 4-104 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (311,1) specific number or all numbers in the phonebook. The system announces the names of the phone numbers already stored in the system. The system then gives the option to delete a specific number or all numbers. Once the user chooses to delete a number or all numbers, the system asks the user to confirm. . Help The system announces the available com- mands. phonebook. When the system acknowl- edges the command, the system announces all voicetags registered in the system. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session. Transfer Entry Use the Transfer Entry command to transfer the phonebook data stored in a cellular phone to the system. The system acknowledges the command and asks the user to initiate a transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via a Bluetooth® communication link. The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for more information. The system repeats the number and prompts the user for the next command. After entering numbers, choose “Store.” The system confirms the name, location and number. The system then asks if the user would like to store another location for the same name. If the user does not wish to store another location, the system ends the VR session. . Delete Entry Use the Delete Entry command to delete a SAA2584 GUID-09D30387-1DD9-49C9-9D99-152A26416184 Recent Calls Incoming Use the Incoming command to make a call viewing the list of incoming calls. . Missed Use the Missed command to make a call viewing the list of missed calls. . Outgoing Use the Outgoing command to make a call viewing the list of outgoing calls. . Redial Use the Redial command to dial the last outgoing call. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-105 [ Edit: 2011/ 7/ 18 Model: Z51-D ] Black plate (312,1) already been connected to the vehicle system, the system announces the name the phone is already using. The that connecting procedure will then be can- celled. The Add Phone command is not available when the vehicle is moving. . Select Phone Use the Select Phone command to select a phone of lesser priority when two or more phones connected with Bluetooth® Hands- Free Phone System are in the vehicle at the same time. The system asks the user to name the phone and confirm the selection. Once the selection is confirmed, the se- lected phone remains active until the ignition switch is placed in the OFF position or a new phone is selected. . Delete Phone Use the Delete Phone command to delete a specific phone or all phones from Blue- tooth® Hands-Free Phone System. The system announces the names of the phones already paired with the system and their priority level. The system then gives the option to delete a specific phone, all phones or listen to the list again. Once the user chooses to delete a phone or all phones, the . Callback Use the Callback command to dial the last incoming call. . Help The system announces the available com- mands. SAA2585 Connect Phone . Add Phone GUID-2F3EEA09-0D60-44B2-B20E-4F833581CE6D Use the Pair Phone command to connect a compatible phone to the Bluetooth® Hands- Free Phone System. When asked to enter a PIN code to connect a Bluetooth® cellular phone, enter the code “1234”. The code is always “1234” regardless of the number of phones connected. Up to 5 phones can be connected. If the user tries to connect a sixth phone, the system announces that the user must first delete one phone or replace an existing phone. If the user tries to connect a phone that has 4-106 Monitor, heater, air conditioner, audio, phone and voice recognition systems [ Edit: 2011/ 7/ 18 Model: Z51-D ] system asks the user to confirm. . Bluetooth On/Off NOTE: When the user deletes a phone, the associated phone book for that phone will also be deleted. . Replace Phone Use the Replace Phone command to change the priority level of the active phone. The priority level determines which phone is active when more than one paired Blue- tooth® phone is in the vehicle. The system states the priority level of the active phone and asks for a new priority level (1, 2, 3, 4, 5). If the new priority level is already being used for another phone, the two phones will swap priority levels. For example, if the current priority levels are: . Priority Level 1 = Phone A . Priority Level 2 = Phone B . Priority Level 3 = Phone C and you change the priority level of Phone C to Level 1, then: . Priority Level 1 = Phone C . Priority Level 2 = Phone B . Priority Level 3 = Phone A Use the Bluetooth On/Off command to turn on/off Bluetooth® Hands-Free Phone Sys- tem. . Help The system announces the available com- mands. VOICE ADAPTATION MODE GUID-EB7B2DD6-433A-4FB9-B38D-E7A89A3FA23D The Voice Adaptation mode allows up to two users with different dialects to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each con- nected phone. Training procedure GUID-03C15AD1-22AD-4FC7-BA0F-5E4D948295C9 1. Position the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver’s seat with the engine the parking brake on, and the running, transmission in Park. button. 3. Press the 4. Speak: “Help”. The system acknowledges the command and announces the next set of available commands. Black plate (313,1) 5. Speak: "Voice Adaptation". The system acknowledges the command and displays the voice adaptation mode screen. 6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions pro- vided by the system. 7. When preparation is complete and you are ready to begin, press the button. 8. The voice adaptation mode will be ex- plained. Follow the instructions provided by the system. 9. When training is finished, the system will tell you an adequate number of phrases have been recorded. 10. The system will ask you to say your name. Follow the instructions to register your name. 11. The system will announce that voice adapta- tion has been completed and the system is ready. The voice adaptation mode will stop if: button is pressed in voice adapta- The tion mode. The vehicle is driven during voice adaptation mode. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-107 [ Edit: 2011/ 7/ 18 Model: Z51-D ] . The ignition switch is placed in the OFF or LOCK position. Black plate (314,1) the voice commands for Alternate Command Mode be turned off and Standard Mode be used for the best recognition performance. For the navigation system, refer to the Navigation System Owner’s Manual of your vehicle. For CrossCabriolet models: The voice recognition system cannot be oper- ated when the soft top is open. NISSAN VOICE RECOGNITION STANDARD MODE GUID-E030B25F-1CD2-4F18-B605-1529B5C7136E The following section is applicable when the Standard Mode is activated. The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and also are announced by the system. NISSAN VOICE RECOGNITION SYSTEM (models with navigation system) GUID-A30474D6-0723-412B-94D9-B6E7FA3EE8EF

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2012 Nissan Murano Owners Manual