2002 Mercedes-benz CL Class Owners Manual

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

304

DISPLAY DEFECTIVE (engine control unit)

DISPLAY DEFECTIVE (several systems)

Line 1

Line 2

DISPLAY DEFECTIVE

VISIT WORKSHOP!

C*

Line 1

Line 2

DISPLAY DEFECTIVE

VISIT WORKSHOP!

C*

* C = Category, see page 303

* C = Category, see page 303

This message is displayed to indicate that the information being relayed by the engine control unit is no longer complete. The display for coolant temperature gauge, tachometer, or the cruise control may have failed.

The displays for several systems have failed. Some systems themselves may also have failed.

J_OM_215.book Seite 305 Mittwoch, 30. Mai 2001 2:01 14

BATTERY /ALTERNATOR

Line 1

Line 2

BATTERY/ALTERNATOR

VISIT WORKSHOP!

C*

* C = Category, see page 303

This message indicates a malfunction which must be repaired immediately. It may indicate that the poly-V-belt has broken. Should this condition occur, the poly-V-belt must be replaced before continuing to operate the vehicle. Otherwise, the engine will overheat due to an inoperative water pump which may result in damage to the engine. Do not continue to drive the vehicle with this message displayed. Doing so could result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty.

Malfunction and warning messages

305

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 306 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

306

ENTRY POSITION

BRAKE ASSIST

Line 1

Line 2

ENTRY POSITION

DO NOT DRIVE!

C*

Line 1

Line 2

BRAKE ASSIST

VISIT WORKSHOP!

C*

* C = Category, see page 303

* C = Category, see page 303

Wait until the seat and steering wheel have moved to their driving positions. The display will clear when they have done so. See also page 66 for easy-entry/exit feature.

A malfunction has been detected in the system. The brake system functions in the usual manner, but without brake assist system (BAS). See page 275 for notes on the brake assist system (BAS).

J_OM_215.book Seite 307 Mittwoch, 30. Mai 2001 2:01 14

BRAKE PAD WEAR

BRAKE FLUID

Line 1

Line 2

BRAKE PAD WEAR

VISIT WORKSHOP!

C*

Line 1

Line 2

BRAKE FLUID

VISIT WORKSHOP!

C*

* C = Category, see page 303

* C = Category, see page 303

When this message appears during braking, it indicates that the brake pads are worn down. Have the brake system checked at your authorized Mercedes-Benz Center as soon as possible.

Warning! Driving with this message displayed can result in an accident. Have your brake system checked immediately. Don’t add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. You can be seriously burned.

Malfunction and warning messages

307

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 308 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

308

PARKING BRAKE

TRUNK OPEN

Line 1

Line 2

C*

Line 1

Line 2

PARKING BRAKE

RELEASE PARKING BRAKE!

TRUNK OPEN!

C*

* C = Category, see page 303

* C = Category, see page 303

J_OM_215.book Seite 309 Mittwoch, 30. Mai 2001 2:01 14

ELEC. STABIL. PROG. (Electronic stability program)

Line 1

Line 2

DISPLAY DEFECTIVE

VISIT WORKSHOP!1

ESP

VISIT WORKSHOP!2, 3, 4

C*

* C = Category, see page 303

1 The display or the system is malfunctioning.

2 A malfunction has been detected in the system. Only partial engine

output will be available.

3 The enhanced vehicle stability offered by ESP and the torque

reduction feature are unavailable.

4 This message may be displayed if the power supply was

interrupted (battery disconnected or empty). Synchronize ESP, see page 279.

Malfunction and warning messages

309

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 310 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

310

COOLANT (coolant level)

Line 1

COOLANT

Line 2

CHECK LEVEL!

C*

* C = Category, see page 303

The low engine coolant level warning should not be ignored. Extended driving with the symbol displayed may cause serious engine damage not covered by the Mercedes-Benz Limited Warranty. In cases of major or frequent minor coolant loss, have the cooling system checked at your authorized Mercedes-Benz Center as soon as possible.

Notes: Do not drive without coolant in the cooling system. The engine will overheat causing major engine damage. Monitor the coolant temperature gauge while driving, see page 117. See page 339 for instructions on topping up the coolant.

When this message appears while driving, the coolant level has dropped below the required level. If no leaks are noticeable and the engine temperature does not increase, continue to drive to the nearest service station and have coolant added to the coolant system.

Warning! Do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn if it comes into contact with hot engine parts. You can be seriously burned.

J_OM_215.book Seite 311 Mittwoch, 30. Mai 2001 2:01 14

COOLANT (coolant temperature)

Line 1

COOLANT

COOLANT

Line 2

STOP, ENGINE OFF!1

VISIT WORKSHOP!2

C*

* C = Category, see page 303

1 This may indicate that the poly-V-belt has broken. Should this

condition occur, the poly-V-belt must be replaced before continuing to operate the vehicle. Otherwise, the engine will overheat due to an inoperative water pump which may result in damage to the engine. Do not continue to drive the vehicle with this message displayed. Doing so could result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty.

2 The cooling fan for the coolant is faulty. Observe the coolant

temperature gauge. See page 117

During severe operating conditions and stop-and-go city traffic, the coolant temperature may rise close to the red marking. The engine should not be operated with the coolant temperature in the red zone. Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty.

Warning! Driving when your engine is badly overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated engine can cause serious burns and can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it. Turn off the engine, get out of the vehicle and do not stand near the vehicle until it cools down.

Malfunction and warning messages

311

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 312 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

312

LIGHTING SYSTEM

Line 1

Line 2

C*

Line 1

LOW BEAM,L

LOW BEAM,R

Line 2

CHECK LAMPS!

CHECK LAMPS!

DISPLAY DEFECTIVE

VISIT WORKSHOP!1

TURN SIGNAL LR

CHECK LAMPS!

TURN SIGNAL RR

CHECK LAMPS!

* C = Category, see page 303

TURN SIGNAL IN MIRROR, L CHECK LAMPS!

TURN SIGNAL IN MIRROR, R CHECK LAMPS!

TURN SIGNAL LF

CHECK LAMPS!

TURN SIGNAL RF

CHECK LAMPS!

BRAKE LIGHT2

VISIT WORKSHOP!

C*

BRAKE LAMP, L3

CHECK LAMPS!

BRAKE LAMP, R3

CHECK LAMPS!

3RD BRAKE LAMP3

CHECK LAMPS!

HIGH BEAM, L

HIGH BEAM, R

CHECK LAMPS!

CHECK LAMPS!

LICENSE PLATE LAMP, L

CHECK LAMPS!

LICENSE PLATE LAMP, R

CHECK LAMPS!

TURN OFF LAMPS!

FRONT FOG LAMPS, L

CHECK LAMPS!

J_OM_215.book Seite 313 Mittwoch, 30. Mai 2001 2:01 14

Line 1

Line 2

C*

FRONT FOGLAMP, R

CHECK LAMPS!

REAR FOGLAMP

CHECK LAMPS!

REVERSE LAMP, L

CHECK LAMPS!

REVERSE LAMP, R

CHECK LAMPS!

TAIL LAMP, L

TAIL LAMP, R

STANDING LAMP, L

STANDING LAMP, R

CHECK LAMPS! SUBSTITUTE LAMP ON!4

CHECK LAMPS! SUBSTITUTE LAMP ON!4

CHECK LAMPS! SUBSTITUTE LAMP ON!4

CHECK LAMPS! SUBSTITUTE LAMP ON!4

In the case of bulb failures in certain lamps, other lamps will substitute. See page 360 for instructions on replacing bulbs.

* C = Category, see page 303

1 The display or the system is malfunctioning.

2 The brake lamps are switching on after a delay or are permanently

on – visit workshop immediately.

3 The brake lamps comprise several light emitting diodes. The

warning message will only appear if all light emitting diodes have stopped working.

4 Other bulbs will be brought into use as replacements when certain

lamps blow.

Malfunction and warning messages

313

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 314 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

314

LAMP SENSOR

SEAT BELT SYSTEM

Line 1

Line 2

LAMP SENSOR

VISIT WORKSHOP!

C*

Line 1

Line 2

SEAT BELT SYSTEM

VISIT WORKSHOP!

C*

* C = Category, see page 303

* C = Category, see page 303

The headlamps will be switched on automatically if the light sensor malfunctions. To deactivate the daylight running lamp mode, see the individual setting menu “LIGHTING” – “LAMP CIRCUIT HEADLAMP” on page 144. It will then be possible to switch the headlamps on and off using the exterior lamp switch. See page 159 for notes on the exterior lamp switch.

J_OM_215.book Seite 315 Mittwoch, 30. Mai 2001 2:01 14

TELEPHONE – FUNCTION

CRUISE CONTROL

Line 1

FUNCTION

Line 2

NOT AVAILABLE!

C*

Line 1

Line 2

CRUISE CONTROL

VISIT WORKSHOP!1

C*

* C = Category, see page 303

The display appears if button í or ì on the multifunction steering wheel is pressed and the vehicle is not equipped with a telephone.

* C = Category, see page 303.

1 Cruise control is malfunctioning.

Malfunction and warning messages

315

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 316 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

316

ACTIVE BODY CONTROL (ABC)

2 The capability of the system is restricted.

Important! When the message “ACTIVE BODY CONTROL – DRIVE CAREFULLY!” appears, do not exceed a speed of 50 mph (80 km/h). The vehicle driving characteristics are changed due to a noticeably softer suspension. In this case visit your Mercedes-Benz Center as soon as possible. Do not continue to drive if loss of hydraulic fluid or leaks are noticed. Doing so could result in subsequent damage that is not covered by the Mercedes-Benz Limited Warranty.

Line 1

Line 2

DISPLAY DEFECTIVE

VISIT WORKSHOP!1

ACTIVE BODY CONTROL

DRIVE CAREFULLY!2

ACTIVE BODY CONTROL

STOP, CAR TOO LOW!3

ACTIVE BODY CONTROL

VISIT WORKSHOP!4

C*

* C = Category, see page 303

1 The display or the system is malfunctioning.

J_OM_215.book Seite 317 Mittwoch, 30. Mai 2001 2:01 14

3 The ABC is defective. Stop the vehicle.

Press upper half of level control switch, see page 283 - system selects raised level mode. The vehicle chassis is raised depending on the kind of defect.

Important! The wheels may not have sufficient clearance when the steering wheel is turned beyond a certain angle if the “ACTIVE BODY CONTROL – STOP, CAR TOO LOW!” message appears. The front fenders will be damaged if the steering wheel is turned too far. Watch and listen for scraping noises. Do not exceed a speed of 50 mph (80 km/h). Visit your Mercedes-Benz Center as soon as possible.

4 The capability of the system is restricted.

Important! When the message “ACTIVE BODY CONTROL – VISIT WORKSHOP!” appears, do not exceed a speed of 50 mph (80 km/h). Visit your Mercedes-Benz Center as soon as possible.

Malfunction and warning messages

317

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 318 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

318

TIRE PRESSURE

TIRE PRESSURE, RF

CAUTION, TIRE DEFECT!1

TIRE PRESSURE, LR

CAUTION, TIRE DEFECT!1

TIRE PRESSURE, RR

CAUTION, TIRE DEFECT!1

TIRE PRESSURE, LF

CHECK TIRES!2

TIRE PRESSURE, RF

CHECK TIRES!2

TIRE PRESSURE, LR

CHECK TIRES!2

Line 1

Line 2

C*

TIRE PRESSURE, RR

CHECK TIRES!2

* C = Category, see page 303.

LR: left rear; LF: left front;

RR: right rear; RF: right front;

TIRE PRESSURE

CAUTION, TIRE DEFECT!1

TIRE PRESSURE

CHECK TIRES!2, 3

TIRE PRESSURE

CHECK TIRES!4

TIRE PRESS. CONTROL ACTIVATED

PRESS DISPLAY AFTER DRIVING A FEW MINS.3

TIRE PRESS. MONITOR

REACTIVATE!3, 5

TIRE PRESS. MONITOR

CURRENTLY INACTIVE!6

TIRE PRESS. MONITOR

VISIT WORKSHOP!7

TIRE PRESSURE, LF

CAUTION, TIRE DEFECT!1

J_OM_215.book Seite 319 Mittwoch, 30. Mai 2001 2:01 14

Warning! Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You may lose control of the vehicle. Continued driving with a flat tire will cause excessive heat build-up and possibly a fire.

1 One or more tires is or has deflated rapidly. Carefully bring the

vehicle to a halt, avoiding abrupt steering and braking maneuvers. For reference on changing wheels, see page 343.

2 The tire pressure on one or more tires is already below minimum

value. Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers. For reference on changing wheels, see page 343.

3 For tire inflation pressure monitor, see page 153.

4 Tire pressure in one or more tires is low. Check and correct tire pressure according to the label affixed inside the fuel filler flap. For tire inflation pressure, see page 351. The tire inflation pressure monitor must be activated again after the tire inflation pressure has been corrected, see page 153.

5 When the message appears after starting the engine, the tire inflation pressure on all road wheels should be checked and corrected according to the label affixed inside the fuel filler flap. For tire inflation pressure, see page 351. The tire inflation pressure monitor must be activated again after the tire inflation pressure has been corrected, see page 153.

6 The tire inflation pressure monitor system is unable to monitor the

tire pressure due to the presence of several wheel electronics in the vehicle (e.g. a deflated road wheel in the trunk), or nearby radio interference source, or excessive wheel sensor temperatures, or unrecognized wheel sensors mounted.

7 The tire inflation pressure monitor is defective or a wheel without proper sensor was installed. Visit your authorized Mercedes-Benz Center.

Malfunction and warning messages

319

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 320 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

320

ENGINE OIL LEVEL

Line 1

Line 2

ENGINE OIL LEVEL

CHECK LEVEL!1

ENGINE OIL LEVEL

STOP, ENGINE OFF!2

ENGINE OIL LEVEL

REDUCE OIL LEVEL3

ENGINE OIL

VISIT WORKSHOP!4

ENGINE OIL LEVEL

VISIT WORKSHOP!5

C*

* C = Category, see page 303.

1 The engine oil level must be checked immediately. See Engine oil

level indicator on page 157.

2 There is no oil in the engine. There is a danger of engine damage.

3 There is a risk of damaging the engine or catalytic converter. The engine oil level must be checked immediately. See Engine oil level indicator on page 157.

4 The engine oil level has dropped to a critical level.

Check the engine oil level immediately. See Engine oil level indicator on page 157 and check the engine for visible leakage (loss of oil). It may be that there is water in the engine oil. Have the engine oil checked.

5 The measuring system is malfunctioning.

When the “ENGINE OIL LEVEL – CHECK LEVEL” message appears while the engine is running and at operating temperature, the engine oil level has dropped to approximately the minimum mark on the dipstick. When this occurs, the warning will first come on intermittently and then stay on if the oil level drops further. If no oil leaks are noted, continue to drive to the nearest service station where the engine oil should be topped to the “full” mark on the dipstick with an approved oil. The engine oil level warnings should not be ignored. Extended driving with the symbol displayed could result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty.

J_OM_215.book Seite 321 Mittwoch, 30. Mai 2001 2:01 14

SEAT BACKREST

Line 1

Line 2

SEAT BEACKREST, LEFT

LOCK!

SEAT BEACKREST, RIGHT

LOCK!

* C = Category, see page 303.

C*

Warning! The seat belts provide protection only with the backrest locked in place and, therefore, must be locked in place with the vehicle in motion. Do not drive the vehicle when the backrest is not locked in place. If the warning message “SEAT BACKREST, LEFT – LOCK!” or “SEAT BACKREST, RIGHT – LOCK!” is displayed in the multifunction display, then the respective backrest is not engaged in its lock. Carefully slow down, and drive with caution to an area which is in a safe distance from the roadway. Always provide sufficient room behind the backrest and fold the backrest all the way back until it locks in place. The warning message is no longer displayed as soon as the backrest is locked in place. If both backrests are locked in place and the warning message is still displayed, have the system checked at your authorized Mercedes-Benz Center immediately.

Malfunction and warning messages

321

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 322 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

KEY

322

DOOR

P54.30-2245-21

Line 1

Line 2

REPLACE KEY1

VISIT WORKSHOP!

AUTOM. LIGHT ON

REMOVE KEY!

C*

* C = Category, see page 303.

1 Key needs possibly to be replaced.

Line 1

DOOR OPEN!

Line 2

C*

* C = Category, see page 303.

J_OM_215.book Seite 323 Mittwoch, 30. Mai 2001 2:01 14

HOOD

TELE AID

Line 1

Line 2

HOOD OPEN!

C*

Line 1

TELE AID

Line 2

VISIT WORKSHOP!1

C*

* C = Category, see page 303.

See page 334 for hood.

1 The Tele Aid system consists of three types of response; automatic and manual emergency, roadside assistance and information. With this message displayed, one or more functions may not be available.

See page 216 for notes on the Tele Aid.

If a malfunction is indicated as outlined above, have the system checked at the nearest Mercedes-Benz Center as soon as possible.

Malfunction and warning messages

323

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 324 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

324

CHIP-CARD (KEYLESS-GO)

1 Check battery of KEYLESS-GO-card, see page 372.

2 The KEYLESS-GO-card cannot be recognized by the running

engine (e.g. strong radio-frequency interference) or the card is not in the vehicle. Stop immediately and search for the KEYLESS-GO-card or continue to operate the vehicle with the electronic key, otherwise the vehicle cannot be centrally locked or the engine started again after the engine stops automatically. See page 37.

3 The KEYLESS-GO-card was momentarily not recognized. If

message repeats, place card in a different position or continue to operate the vehicle with the electronic key, see page 37.

4 A KEYLESS-GO-card left inside the vehicle has been recognized

while locking the vehicle from the outside, see page 37.

5 The message appears for a maximum 60 seconds each time the

driver’s door is opened, as long as no electronic key is in the starter switch. The message appears regardless of the past operation method (electronic key or KEYLESS-GO-card), see page 37.

Line 1

CHIP CARD

CHIP CARD

CHIP CARD

CHIP CARD

CHIP CARD

Line 2

CHECK BATTERY!1

NOT RECOGNIZED!2

NOT RECOGNIZED!3

STILL IN VEHICLE!4

DO NOT FORGET!5

C*

* C = Category, see page 303.

J_OM_215.book Seite 325 Mittwoch, 30. Mai 2001 2:01 14

SELECTOR LEVER (Vehicles with KEYLESS-GO only)

AIR CLEANER

Place selector lever in position “P”. The message appears when attempting to turn off the engine while the selector lever is in any other position than “P”, see page 234.

Line 1

Line 2

REPLACE AIR CLEANER

VISIT WORKSHOP!

C*

* C = Category, see page 303.

Malfunction and warning messages

325

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 326 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Malfunction and warning messages

326

WASHER FLUID

Line 1

Line 2

WASHER FLUID

CHECK LEVEL!

C*

* C = Category, see page 303.

When this message appears while the engine is running, the level of the reservoir has dropped to approximately 1/3 of the total volume. The reservoir should be refilled with the prescribed mixture of MB Windshield washer concentrate and water or the concentrate and commercially available premixed windshield washer solvent/antifreeze, depending on ambient temperature, at the next opportunity. The reservoir for the windshield and headlamp washer systems is located in the engine compartment. See windshield and headlamp washer system on page 340 for instructions on topping up the washer fluid.

1 Due to the presence of electro-magnetic radiation, the system is presently unavailable. After a short period of time try to activate the system again.

2 Distronic is automatically switched off.

Distronic sensor in hood grille needs cleaning, see page 384.

3 The display or the system is malfunctioning.

4 Distronic is non operational.

J_OM_215.book Seite 327 Mittwoch, 30. Mai 2001 2:01 14

DISTRONIC (DTR)

Line 1

Line 2

DISTRONIC EXTERNAL MALFUNCTION!1

REACTIVATE!

DISTRONIC MALFUNCTION CLEAN SENSOR!2

SEE OWNER’S MAN.

DISTRONIC

VISIT WORKSHOP!3

SPEEDTRONIC

VISIT WORKSHOP!4

C*

* C = Category, see page 303.

Malfunction and warning messages

327

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 328 Mittwoch, 30. Mai 2001 2:01 14

J_OM_215.book Seite 329 Mittwoch, 30. Mai 2001 2:01 14

Practical hints

First aid kit .....................................330
Fuses ................................................331
Shelf below rear window ..............333
Hood .................................................334
Checking engine oil level .............337
Automatic transmission

fluid level ...................................338

Active body control

(ABC) fluid level ........................338
Coolant level ...................................339
Adding coolant ...........................339

Windshield and headlamp

washer system ...........................340
Windshield and headlamp washer fluid mixing ratio .........340

Spare wheel, vehicle tools, storage

compartment ............................. 341
Jack .................................................. 342
Wheels ............................................ 343
Tire Replacement ....................... 343
Rotating wheels ......................... 344
Spare wheel .................................... 344
Changing wheels ........................... 346
Tire inflation pressure ................. 351
Battery ............................................. 352
Jump starting ................................. 355
Towing the vehicle ........................ 357
Exterior lamps ............................... 360
Headlamp assembly .................. 361
Taillamp assemblies .................. 364
Standby bulb function .................. 367

Changing batteries

in the electronic key .................369
Synchronizing remote control ............................ 371

Changing batteries in

the KEYLESS-GO-card ..............372
Emergency engine shut-down ..... 374
Fuel filler flap,

manual release .......................... 374

Emergency operation of

sliding/pop-up roof ...................375
Replacing wiper blades ................. 376
Roof rack .........................................378

Contents - Practical hints

329

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 330 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

First aid kit

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

330

First aid kit

The first aid kit is located in the rear seat armrest (1).

To open: Press handle (2) upwards and fold the lid (3) up. Remove the first aid kit.

To close: Fold the lid (3) down until it engages.

J_OM_215.book Seite 331 Mittwoch, 30. Mai 2001 2:01 14

Fuses Most of your vehicle’s electrical components are fused with safety fuses. With the exception of the brake lights, all individual lighting system components are electronically fused. Before replacing a blown safety fuse, determine the cause of the short circuit. Always observe amperage and color of fuse. The circuit for components is protected by a cycled circuit breaker interrupted if too much current is being drawn. The circuit closes automatically after a short time; the circuit is broken again if the malfunction reoccurs. Always use a new fuse for replacement. Never attempt to repair or bridge a blown fuse. A fuse chart, spare fuses and a fuse extractor are located in the vehicle tool kit in the luggage bowl under the trunk floor. See page 341 for notes on the vehicle tool kit.

Fuse boxes in the engine compartment

1 Fuse box in engine compartment, left-hand side

P54.15-2064-26

3 Tabs

Fuses

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

331

J_OM_215.book Seite 332 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Fuses

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

332

To close the fuse box: Ensure that the sealing rubber is properly positioned when you replace the cover. Press the cover down by hand. Slide both tabs (3) back to the ‹ symbol on the fuse box.

Note: The fuse box cover must be properly positioned and both tabs pushed forward to prevent moisture entering the fuse box.

P54.15-2065-26

2 Fuse box in engine compartment, right-hand side 3 Tabs

To gain access to fuse box: Slide both tabs (3) on fuse box forward to the Πsymbol and remove the cover.

J_OM_215.book Seite 333 Mittwoch, 30. Mai 2001 2:01 14

Auxiliary fuse box below rear seat

Shelf below rear window

Warning! The shelf below the rear window should not be used to carry objects. This will avoid such objects from being thrown about and injuring vehicle occupants during an accident or sudden maneuver. The trunk is the preferred place to carry objects.

4 Auxiliary fuse box below right rear seat.

To open: Remove the cover.

To close: Press the cover on.

Fuses

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

333

J_OM_215.book Seite 334 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Engine compartment

Hood

334

Warning! To help prevent personal injury, stay clear of moving parts when the hood is open and the engine is running. Be sure the hood is properly closed before driving. When closing hood, use extreme caution not to catch hands or fingers. The radiator fan may continue to run for approximately 30 seconds or even restart after the engine has been turned off. Stay clear from fan blades. If you see flames or smoke coming from the engine compartment, or if the coolant temperature gauge indicates that the engine is overheated, do not open the hood. Move away from vehicle and do not open the hood until the engine has cooled. If necessary, call a fire department.

The engine is equipped with a transistorized ignition system. Because of the high voltage it is dangerous to touch any components (ignition coils, spark plug sockets, diagnostic socket) of the ignition system

• with the engine running, • while starting the engine, • if ignition is “on” and the engine is turned

manually.

J_OM_215.book Seite 335 Mittwoch, 30. Mai 2001 2:01 14

To open: To unlock the hood, pull release lever (1) under the driver’s side of the instrument panel. At the same time a handle will extend out of the radiator grill.

Pull handle (2) to its stop out of radiator grill and open hood (do not pull up on the handle).

Note: To avoid damage to the windshield wipers or hood, open the hood only with the wipers in the parked position.

Engine compartment

335

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 336 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Engine compartment

336

To close: Lower the hood and let it drop into lock from a height of approx. 1 ft. (30 cm), assisting with hands placed flat on edges of hood (3). To avoid hood damage, please make sure that hood is fully closed. If not, repeat closing procedure. Do not push down on hood to attempt to fully close it.

J_OM_215.book Seite 337 Mittwoch, 30. Mai 2001 2:01 14

Checking engine oil level

CL 500

1 Dipstick

P18.40-0287-26

P18.40-2067-26

Model CL 600: The dipstick is omitted. Engine oil level can be checked via the engine oil level indicator, see page 157.

2 Oil filler cap

CL 600

Model CL 500 and CL 55 AMG To check the engine oil level, park vehicle on level ground, with engine at normal operational temperature. Check engine oil level approximately 5 minutes after stopping the engine, allowing for the oil to return to the oil pan.

Engine compartment

337

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 338 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Engine compartment

338

The engine oil level can be checked by either the oil dipstick or via the multifunction display in the instrument cluster, see page 157. Wipe the oil dipstick clean prior to checking the engine oil level. Fully insert dipstick in tube, and remove after three seconds to obtain accurate reading.

See malfunction and warning messages on page 303 if an engine oil level display appears on the multifunction display when the engine is running.

Note: See page 157 for engine oil level indicator.

The oil level must be between the lower mark (min) and the upper mark (max) on the oil dipstick.

Unscrew the oil filler cap and add oil carefully if you need to top up the oil. CL 500 and CL 55 AMG: Fill quantity between upper and lower dipstick marking level is approximately 2.1 US qt (2.0 l). CL 600: Follow the message appearing on the engine oil level indicator display (page 157) as to quantity to be added. Re-install oil filler cap. Do not overfill the engine. Excessive oil must be drained or siphoned. It could cause damage to engine and catalytic converter not covered by the Mercedes-Benz Limited Warranty.

Automatic transmission fluid level The transmission has a permanent fill of automatic transmission fluid. Regular automatic transmission fluid level checks and changes are not required. For this reason the dipstick is omitted. If you notice fluid leaks or gear shifting malfunctions, have your authorized Mercedes-Benz Center check the transmission fluid level.

Active body control (ABC) fluid level Regular fluid level check is not required. If you notice fluid leaks or malfunctions, have your authorized Mercedes-Benz Center check the ABC-system.

J_OM_215.book Seite 339 Mittwoch, 30. Mai 2001 2:01 14

Coolant level

1 Coolant expansion tank

To check the coolant level, the vehicle must be parked on level ground and the engine stopped. Check coolant level only when coolant is cold. The coolant level should reach the black top part of the reservoir. See page 403 for antifreeze/anticorrosion mixture.

Adding coolant If coolant has to be added, a 50/50 mixture of water and MB anticorrosion/antifreeze should be added.

Warning!

• In order to avoid possibly serious burns:

Use extreme caution when opening the hood if there are any signs of steam or coolant leaking from the cooling system, or if the coolant temperature gauge indicates that the coolant is overheated.

• Do not remove pressure cap on coolant

reservoir if engine temperature is above 194°F (90°C). Allow engine to cool down before removing cap. The coolant reservoir contains hot fluid and is under pressure.

• Using a rag, slowly open cap approximately 1/2

turn to relieve excess pressure. If opened immediately, scalding hot fluid and steam will be blown out under pressure.

• Do not spill antifreeze on hot engine parts.

Antifreeze contains ethylene glycol which may burn if it comes into contact with hot engine parts.

Engine compartment

339

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

J_OM_215.book Seite 340 Mittwoch, 30. Mai 2001 2:01 14

Instruments and controls

Operation

Driving

Instrument cluster display

Practical hints

Car care

Technical

data

Index

Engine compartment

340

Windshield and headlamp washer system

1 Windshield and headlamp washer fluid reservoir

The reservoir should be refilled with MB Windshield Washer Concentrate and water (or concentrate commercially available premixed windshield washer solvent/antifreeze, depending on ambient temperatures). Capacity approx. 7.1 US qt (6.7 l).

Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/antifreeze on hot engine parts, because it may burn. You can be seriously burned.

Windshield and headlamp washer fluid mixing ratio For temperatures above freezing: MB Windshield Washer Concentrate “S” and water. 1 part “S” to 100 parts water (40 ml “S” to 1 gallon water). For temperatures below freezing: MB Windshield Washer Concentrate “S” and commercially available premixed windshield washer solvent/antifreeze. 1 part “S” to 100 parts solvent (40 ml “S” to 1 gallon solvent).

J_OM_215.book Seite 341 Mittwoch, 30. Mai 2001 2:01 14

Spare wheel, vehicle tools, storage compartment