You can use the remote transmitter or the key to operate the moonroof.
2 Opening the Windows and Moonroof*
with the Remote Transmitter P. 137
2 Opening/Closing the Windows and
Moonroof* with the Key P. 138
139
Open
Tilt
Close
* Not available on all models
Operating the Switches Around the Steering Wheel
Ignition Switch
(0 LOCK: Insert and remove the key in this position.
You cannot take the key out unless the shift lever is in (P.
1Ignition Switch
(q ACCESSORY: Operate the audio system and other accessories in this position.
(w ON: This is the position when driving.
(e START: This position is for starting the engine. The switch returns to ON (w when you let go of the key.
If you open the driver's door when the key is in LOCK (0 or ACCESSORY (q, a warning buzzer will sound to remind you to take the key out. When this happens, the following messages appear on the multi-information display *: • In LOCK (0: REMOVE KEY. • In ACCESSORY (q: REMOVE KEY The buzzer will
stop when you take the key out.
If the key won't turn from LOCK (0 to ACCESSORY (q, turn the key while moving the steering wheel left and right. The steering wheel will unlock, allowing the key to turn.
140
* Not available on all models
Turn Signals
Right Turn
Left Turn
Light Switches ■ Manual Operation
High Beams
Low Beams
Flashing the high beams
Turns on side marker, tail, and rear license plate lights Turns on headlights, parking, side marker, tail, and rear license plate lights
uuOperating the Switches Around the Steering WheeluTurn Signals
The turn signals can be used when the ignition switch is in ON (w.
Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch. ■ High beams Push the lever forward until you hear a click. ■ Low beams When in high beams, pull the lever back to return to low beams. ■ Flashing the high beams Pull the lever back, and release it.
1Light Switches
If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver’s door is opened.
When the lights are on, the lights on indicator in the instrument panel will be on.
2 Lights On Indicator P. 79
Models with high voltage discharge tube bulb Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs. If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.
Do not leave the lights on when the engine is off because it will cause the battery to discharge.
Continued
141
uuOperating the Switches Around the Steering WheeluLight Switches
■ Automatic Lighting Control*
Automatic lighting control can be used when the ignition switch is in ON (w.
When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.
uYou can change the auto light sensitivity
setting.
2 Customized Features P. 101
1Automatic Lighting Control *
We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.
The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.
Light Sensor
■ Automatic Lighting Off Feature The headlights, all other exterior lights, and the instrument panel lights turn off within 15 seconds after you remove the key and close the driver's door.
uYou can change the headlight auto off timer setting.
2 Customized Features P. 101
If you turn the ignition switch to LOCK (0 with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (3 minutes, if the switch is in the AUTO position).
The lights turn on again when you unlock or open the driver's door. If you unlock the door, but do not open it within 15 seconds, the lights go off. If you open the driver's door, you will hear a lights on reminder chime.
Adjust the auto light sensitivity as follows:
Setting
The exterior lights come on when the ambient light is at
MAX HIGH MID LOW MIN
Bright
Dark
142
* Not available on all models
uuOperating the Switches Around the Steering WheeluFog Lights*
Fog Lights*
When the low beam headlights are on, turn the fog light switch on to use the fog lights.
1Fog Lights *
When the fog lights are on, the indicator in the instrument panel will be on.
2 Fog Light Indicator * P. 80
Fog Light Switch
Daytime Running Lights The high beam headlights come on slightly dimmer than normal when the following conditions have been met: • The ignition switch is in ON (w. • The headlight switch is off. • The parking brake is released.
The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.
The high beam headlights return to the original brightness once the headlight switch is turned on.
* Not available on all models
143
uuOperating the Switches Around the Steering WheeluWipers and Washers
Wipers and Washers
The windshield wipers and washers can be used when the ignition switch is in ON (w.
■ MIST The wipers run at high speed until you release the lever.
■ Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.
■ Adjusting the delay Turn the adjustment ring to adjust the wiper delay.
Long delay
Short delay
■ Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.
1Wipers and Washers
NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.
NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.
If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. When the vehicle speeds up, the wiper operation’s shortest delay setting ( the same.
) and the LO setting become
Turn the washers off if no washer fluid comes out. The pump may get damaged.
Pull to use washer.
Intermittent Time Adjustment Ring
MIST OFF INT: Low speed with intermittent LO: Low speed wipe HI: High speed wipe
144
uuOperating the Switches Around the Steering WheeluWipers and Washers
■ Rear Wiper/Washer
1Rear Wiper/Washer
The rear wiper and washer can be used when the ignition switch is in ON (w.
If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place:
■ Wiper switch (OFF, ON) The wiper operates intermittently after completing a few sweeps.
Rotate the wiper switch to OFF, and turn the ignition switch to ACCESSORY (q or LOCK (0, then remove the obstacle.
The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes, once the circuit has returned to normal.
ON: Intermittent OFF Washer
■ Washer ( Sprays while you rotate the switch to this position. Hold it to activate the wiper and to spray the washer. Once released, it stops operating after a few more sweeps.
■ Operating in reverse When you shift the transmission to (R with the front wiper activated, the rear wiper operates automatically as follows even if its switch is off.
Front Wiper Position
INT (Intermittent)
LO (Low speed wipe) HI (High speed wipe)
Rear Wiper Operation
Intermittent
Continuous
145
uuOperating the Switches Around the Steering WheeluBrightness Control
Brightness Control
When the ignition switch is in ON (w, you can use the brightness control knob to adjust instrument panel brightness. Brighten: Turn the knob to the right. Dim: Turn the knob to the left.
1Brightness Control
Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.
Control Knob
On multi-information display
You will hear a beeper when the brightness reaches minimum or maximum. The information display */multi-information display * will return to its original state several seconds after you adjust the brightness.
■ Brightness level indicator The brightness level is shown on the information display */multi-information display * while you are adjusting it.
Pressing the (Select/Reset) knob or the (information) button * switches the display.
If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the exterior lights are on.
On information display
146
* Not available on all models
Rear Defogger/Heated Door Mirror* Button
uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror* Button
Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON (w.
Models with heating and cooling system The rear defogger and heated door mirrors * automatically switch off after 20 minutes.
Models with climate control system The rear defogger and heated door mirrors automatically switch off after 10-30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, they do not automatically switch off.
1Rear Defogger/Heated Door Mirror * Button
NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.
This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long period when the engine is idling. This may weaken the battery, making it difficult to start the engine.
* Not available on all models
147
uuOperating the Switches Around the Steering WheeluDriving Position Memory System*
Driving Position Memory System* You can store two driver’s seat and outside mirrors position with the driving position memory system. When you unlock and open the driver’s door with a remote transmitter, the seat and outside mirrors adjust automatically to one of the two preset positions.
The multi-information display shows you which remote transmitter you used to unlock the vehicle when you enter. • DRIVER 1 transmitter is linked to memory button 1. • DRIVER 2 transmitter is linked to memory button 2.
DRIVER 1
DRIVER 2
1Driving Position Memory System *
Using the multi-information display, you can disable the automatic seat adjustment function.
2 Customized Features P. 101
148
* Not available on all models
uuOperating the Switches Around the Steering WheeluDriving Position Memory System*
■ Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
1. Adjust the driver’s seat and the outside
mirrors to the desired position, and turn the ignition switch to ON (w.
2. Press the SET button.
uYou will hear the beeper, and the
memory button indicator light will blink. 3. Press and hold memory button (1 or (2
within five seconds of pressing the SET button. uOnce the seat and the outside mirrors
position has been memorized, the indicator light on the button you pressed stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation will be canceled when: • You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You readjust the outside mirrors. • You turn the ignition switch to any position except
ON (w.
■ Recalling the Stored Position
Memory
Button 1
Memory
Button 2
SET Button
1. Move the shift lever to (P. 2. Apply the parking brake. 3. Press a memory button ((1 or (2).
uYou will hear the beeper, and the
indicator light will blink.
The seat and the outside mirrors will automatically move to the memorized position. When it has finished moving, you will hear the beeper, and the indicator light stays on.
1Recalling the Stored Position
The seat and the outside mirrors will stop moving if you: • Press the SET button, or a memory button ((1 or
(2).
• Adjust the seat position. • Adjust the outside mirrors. • Shift into any position except (P.
149
uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel
Adjusting the Steering Wheel The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.
To adjust
Lever
To lock
1. Push the steering wheel adjustment lever
down. u The steering wheel adjustment lever is
under the steering column.
2. Move the steering wheel up or down, and
in or out. u Make sure you can see the instrument
panel gauges and indicators.
3. Pull the steering wheel adjustment lever up
to lock the steering wheel in position. u After adjusting the position, make sure
you have securely locked the steering wheel in place by trying to move it up, down, in, and out.
1Adjusting the Steering Wheel
3WARNING
Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.
Make any steering wheel adjustments before you start driving.
150
Adjusting the Mirrors
Interior Rearview Mirror Adjust the angle of the rearview mirror when you are sitting in the correct driving position.
■ Rearview Mirror with Day and Night Positions*
Tab
Up
Flip the tab to switch the position. The night position will help to reduce the glare from headlights behind you when driving after dark.
Daytime Position
Down
Night Position
■ Automatic Dimming Rearview Mirror*
When driving after dark, the automatic dimming rearview mirror always reduces the glare from headlights behind you, based in inputs from the mirror sensor. This feature is always active.
Sensor
* Not available on all models
1Adjusting the Mirrors
Keep the inside and outside mirrors clean and adjusted for best visibility.
Adjust the mirrors before you start driving.
2 Adjusting the Seat Positions P. 153
1Automatic Dimming Rearview Mirror *
The auto dimming function cancels when the shift position is in (R.
151
uuAdjusting the MirrorsuPower Door Mirrors
Power Door Mirrors
You can adjust the door mirrors when the ignition switch is in ON (w.
■ Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position. Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.
If activated, either side door mirror automatically tilts downward when you put the shift lever in (R; this improves close-in visibility on the selected side of the vehicle when backing up. The mirror automatically returns to its original position when you shift out of (R.
To activate this feature, turn the ignition switch to ON (w and slide the selector switch to the left or right side.
Adjustment Switch
Selector Switch
■ Reverse Tilt Door Mirror
Slide the selector switch to left or right to tilt down either side door mirror.
152
Adjusting the Seats
Adjusting the Seat Positions
Allow sufficient space.
Adjust the driver's seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passenger's seat should be adjusted in a similar manner, so that it is as far back from the front airbag in the dashboard as possible.
1Adjusting the Seats
3WARNING
Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.
Always sit as far back from the front airbags as possible while maintaining control of the vehicle.
Move back.
■ Adjusting the front driver’s and passenger’s power seat(s) *
Horizontal Position Adjustment
Height Adjustment (Driver’s seat only) *
The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.
Always make seat adjustments before driving.
Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position.
Lumbar Support Adjustment (Driver’s seat only) *
Seat-back Angle Adjustment
* Not available on all models
Continued
153
uuAdjusting the SeatsuAdjusting the Seat Positions
■ Adjusting the passenger’s manual seats The front * and second row outer
Seat-back Angle Adjustment Pull up the lever to change the angle.
The second row center seat
The third row Seat-back Angle Adjustment Pull up strap on the right to change the angle of the right halves of the seat- back, and left for the left halves.
Horizontal Position Adjustment Pull up the bar to move the seat, then release the bar.
Seat-back Angle Adjustment Pull the strap to change the angle.
154
* Not available on all models
■ Adjusting the Seat-Backs
Adjust the driver's seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.
The front seat passenger should also adjust their seat-back to a comfortable, upright position.
Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.
uuAdjusting the SeatsuAdjusting the Seat Positions
1Adjusting the Seat-Backs
3WARNING
Reclining the seat-back too far can result in serious injury or death in a crash.
Adjust the seat-back to an upright position, and sit well back in the seat.
Do not put a cushion, or other object, between the seat-back and your back.
Doing so may interfere with proper seat belt or airbag operation.
If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.
Continued
155
uuAdjusting the SeatsuAdjusting the Seat Positions
■ Adjusting the Head Restraints
Your vehicle is equipped with head restraints in all seating positions.
Head restraints are most effective for protection against whiplash and other rear- impact crash injuries when the center of the back of the occupant's head rests against the center of the restraint. The tops of the occupant's ears should be level with the center height of the restraint.
Position head in the center of the head restraint.
1Adjusting the Head Restraints
3WARNING
Improperly positioning head restraints reduces their effectiveness and increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
156
uuAdjusting the SeatsuAdjusting the Seat Positions
■ Adjusting the front and second row outer and third row outer head
restraint positions
To raise the head restraint: Pull it upward. To lower the head restraint: Push it down while pressing the release button.
Continued
157
uuAdjusting the SeatsuAdjusting the Seat Positions
■ Changing the Second Row*/Third Row Center Seat Head
Restraint Positions
A passenger sitting in the second row/third row center seating position should adjust the height of their head restraint to an appropriate position before the vehicle begins moving. To raise the head restraint: Pull it upward. To lower the head restraint: Push it down while pressing the release button.
■ Removing and Reinstalling the Head Restraints Head restraints can be removed for cleaning or repair.
To remove a head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out.
To reinstall a head restraint: Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button. Pull up on the restraint to make sure it is locked in position.
1Removing and Reinstalling the Head Restraints 3WARNING
Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.
Always replace the head restraints before driving.
To remove the third row seat outer head restraints, fold down the seat-back first.
2 Adjusting the passenger’s manual seats
P. 154
158
* Not available on all models
■ Maintain a Proper Sitting Position After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off.
Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.
In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.
uuAdjusting the SeatsuAdjusting the Seat Positions
1Maintain a Proper Sitting Position
3WARNING
Sitting improperly or out of position can result in serious injury or death in a crash.
Always sit upright, well back in the seat, with your feet on the floor.
Continued
159
uuAdjusting the SeatsuAdjusting the Seat Positions
■ Active Head Restraints The driver’s and front passenger’s seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward. This reduces the distance between the restraint and the occupant’s head, which helps reduce the likelihood of whiplash and injuries to the neck and upper spine.
1Active Head Restraints
In order for the active head restraints to operate properly: • Do not hang any items on the head restraints, or
from the restraint legs.
• Do not place any objects between an occupant and
the seat-back.
• Install each restraint in its proper location.
After a collision, the activated restraint should return to its normal position. If the restraint does not return to its normal position, or in the event of a severe collision, have the vehicle inspected by a dealer.
160
Rear Seats ■ Third Row Seat Access
Strap
Lever
Pull up on the seat-back angle adjustment lever, or pulling the release strap tilts the second row outer seat’s seat-back forward.
Slide the whole seat forward.
uuAdjusting the SeatsuRear Seats
1Third Row Seat Access
When you enter the third row seat, be careful not to trip over the second row seat belt. If necessary, move the seat forward after tilting the seat-back forward.
Continued
161
uuAdjusting the SeatsuRear Seats
■ Removing a Second Row Outer Seat
Seat-back Angle adjustment Lever
1. Lower the head restraint to its lowest
position.
Handle
Lock Release Lever
2. Move the seat to its rearmost position. 3. Fold the seat-back down. 4. Pull the lock release lever, and lift the rear
of the seat. u To lift the seat, grab the handle under
the rear side of the seat cushion.
5. Pull the seat-back slightly, then pivot it
upward. u This unhooks the front of the seat from
the floor.
1Removing a Second Row Outer Seat
Do not remove the seat while driving.
To reinstall the seat, hook the front of the seat to the floor first. Pushing the rear of the seat-back locks the seat in place. Make sure the seat is latched before driving.
162
■ Sliding the Second Row Outer Seats Outward
1. Lower the head restraint to its lowest
position.
2. Move the seat to its rearmost position. 3. Fold the seat-back down. 4. Pull the lock release lever, and lift the rear
of the seat. u To lift the seat, grab the handle under
the rear side of the seat cushion.
5. With the front of the seat hooked to the floor, slide the seat laterally to the outer position until it stops.
6. Lower the seat and push the rear of the
seat-back until it locks. Make sure the seat is latched before driving.
Handle
Slide
uuAdjusting the SeatsuRear Seats
1Sliding the Second Row Outer Seats Outward
When the second row outer seats are in the original (center) position, passengers have easier access to the third row seats. When they are in the outer position, you can install two or three child seats in the second row seats.
Continued
163
1Removing the Second Row Center Seat*
Do not remove the seat while driving.
The multi-functional center seat can be used as the beverage holder when folded down.
2 Beverage Holders P. 173
To reinstall the seat, hook the front of the seat to the floor first. Pushing the rear of the seat-back locks the seat in place. Make sure the seat is latched before driving.
uuAdjusting the SeatsuRear Seats
■ Removing the Second Row Center Seat* Your vehicle’s multi-functional second row center seat is removable. Adjustment Strap
1. Store the center seat belt first. Insert a key
into the slot on the side of the anchor buckle.
Lock Release Strap
2. Retract the seat belt into the holder on the
ceiling.
2 Seat Belt with Detachable Anchor P. 35
3. Pull up the adjustment strap, and fold down
the seat-back.
4. Pull the lock release strap under the seat
cushion, and lift the rear of the seat. u To lift the seat, hold the seat-back.
5. Pull the seat-back slightly, then pivot it
upward. u This unhooks the front of the seat from
the floor.
164
* Not available on all models
■ Tucking away the One-Motion Third row magic Seat®
1. Store the center seat belt first. Insert a key
into the slot on the side of the anchor buckle.
2. Retract the seat belt into the holder on the
ceiling.
2 Seat Belt with Detachable Anchor P. 35
3. Lower the head restraints to their lowest
position.
4. The right and left halves can be tucked
away separately. Pull either strap to release the front leg lock of the third row seat.
5. Continue pulling the strap to tuck the seat
and strap away into the cargo area.
Straps
uuAdjusting the SeatsuRear Seats
1Tucking away the One-Motion Third row magic Seat®
Remove any items from the cargo area before you tuck away the third row seat.
The instruction label is attached at the back of the third row seat-back.
When you tuck away one side of the third row seats and use the non-recessed part of the cargo area, make sure to secure the cargo. Loose items can fly forward and cause injury if you have to brake hard.
Continued
165
uuAdjusting the SeatsuRear Seats
■ To return the seat to the upright position:
1. Grab the handle from outside.
Pull up the folded seat and pivot it forward.
1To return the seat to the upright position:
Make sure the seat is latched before driving.
Straps
Handle
2. The front leg automatically latches.
Pull the strap to put the seat-back(s) upright.
166
uuAdjusting the SeatsuArmrest
Armrest ■ Using the Front and Second Row Outer Seat Armrest
Pull down the armrest.
Front seat with adjustable armrest Pivot down the armrest all the way, then pull it up to a desired angle.
■ Using the Second and Third Row Seat Armrest*
Pull down the armrest of the center seat-back.
* Not available on all models
167
Interior Lights/Interior Convenience Items
Interior Lights ■ Interior Light Switches
Off
On
Door Activated Position
■ ON The interior lights come on regardless of whether the doors or the tailgate are open or closed.
■ Door activated The interior lights come on in the following situations: Front: • When any of the doors or the tailgate are
opened.
• You unlock the driver's door. • You remove the key from the ignition switch.
Cargo area: When the tailgate is open.
■ OFF The interior lights remain off regardless of whether the doors or the tailgate are open or closed.
Off
168
Door Activated Position
On
1Interior Light Switches
In the door activated position, the interior lights fade out and go off about 30 seconds after the doors are closed. The lights go off after 30 seconds in the following situations: • When you unlock the driver's door but do not open
it.
• When you remove the key from the ignition switch
but do not open a door.
Models with multi-information display You can change the interior light dimming time.
2 Customized Features P. 101
All models The interior lights go off immediately in the following situations: • When you lock the driver's door. • When you close the driver's door with the key in
the ignition switch.
• When you turn the ignition switch to ON (w.
If you leave any of the doors open without the key in the ignition switch, the interior lights go off after about 15 minutes.
If you leave the tailgate open without the key in the ignition switch, the cargo area light goes off after about 30 minutes.
uuInterior Lights/Interior Convenience Items uInterior Lights
■ Map Lights
■ Front The map lights can be turned on and off by pressing the lenses.
1Map Lights
When the front interior light switch is in the door activated position and any door is open, the map light will not go off when you press the lens.
■ Second and third row The map lights can be turned on and off by pressing the lenses when the front interior light switch is in the door activated position.
169
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
Interior Convenience Items ■ Glove Box
Pull the handle to open the glove box. You can lock the glove box with the master key.
■ Removable Center Console*
Lever
Pull up on the lever to open the console compartment.
■ Removing the center console Pull up the handle on the front lower side and unlock the console from the floor. Raise it forward to remove.
Handle
1Glove Box
3WARNING
An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.
Always keep the glove box closed while driving.
1Removable Center Console*
When you reinstall the center console, place the rear side on the floor first, and align the marks on the sides with the marks on the floor. Push the center console down and lock it. Make sure it is securely latched before driving.
170
* Not available on all models
Marks
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Flip-up Trash Bag Ring*
Tab
Pull up the ring until it clicks, and lift the tab. Put a plastic bag in the ring. Push the tab down to hold the bag.
1Flip-up Trash Bag Ring *
The ring is designed to hold light items only. Store the ring when it is not in use.
Ring
* Not available on all models
Continued
171
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Center Pocket
Press the button to open the center pocket.
Button
■ Using the center pocket as a cool box *
1Using the center pocket as a cool box *
While the air conditioner is in use, you can store items in the center pocket to keep them cool.
Press the COOL BOX button to cool inside the center pocket (indicator on).
NOTICE Do not put opened cans, or uncovered containers with loose ice inside the cool box. Spilled liquids can damage the upholstery and electrical components in and around the cool box.
The cool box is not a refrigerator. It only keeps chilled beverages cool.
The climate control system continues to cool the cool box when the heater is turned on.
Pressing the COOL BOX button automatically turns on the air conditioning system.
The cool box automatically turns off if:
• The air conditioning system is turned off
• You turn the ignition switch to LOCK (0
172
* Not available on all models
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Beverage Holders
Holder Arm
■ Front panel beverage holder Pull the beverage holder arm inside the front panel tray until the arm contacts the tray front.
1Beverage Holders
NOTICE Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior.
Be careful when you are using the beverage holders. Hot liquid can scald you.
Tray
■ Removable center console beverage
holders *
■ Front seat beverage holders *
* Not available on all models
Continued
173
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Second row seat beverage holders* To use the beverage holder, fold the seat- back.
2 Using the Second and Third Row Seat
Armrest* P. 167
■ Third row seat beverage holders
174
* Not available on all models
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Accessory Power Sockets The accessory power sockets can be used when the ignition switch is in ACCESSORY (q or ON (w.
■ Accessory power socket(s) (console
panel)
Open the cover to use it.
■ Accessory power socket (cargo area) Open the cover to use it.
1Accessory Power Sockets
NOTICE Do not insert an automotive type cigarette lighter element. This can overheat the power socket.
The accessory power socket is designed to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps).
To prevent battery drain, only use the power socket with the engine run.
When each socket is being used simultaneously, the combined power rating of the accessories should not exceed 120 watts (10 amps).
Continued
175
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ AC Power Outlet* The AC power outlet can be used when the engine is running.
Open the cover to use it. Plug in the appliance slightly, turn it 90° clockwise, then push it all the way.
1AC Power Outlet *
NOTICE Do not use the AC power outlet for electric appliances that require high initial peak wattage, such as cathode-ray tube type televisions, refrigerators, electric pumps, etc. It is not suitable for devices that process precise data, such as medical equipment, and that require an extermely stable power supply, such as microcomputer-controlled electric blankets, touch sensor lamps, etc.
The AC power outlet is designed to supply power for up to 115 volt appliances that are rated 150 watts or less.
176
* Not available on all models
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Coat Hooks
Second row
There are coat hooks on the both side of the grab handle and the window frame. Pull it down to use it.
1Coat Hooks
The coat hooks are not designed for large or heavy items.
Third row
■ Cargo Hooks
Use the floor cargo hooks to secure luggage in the cargo area.
Continued
177
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Grocery Bag Hooks
■ Front Pull out the hook on the instrument panel from the side.
1Grocery Bag Hooks
The hooks are designed to hold light items. Heavy objects may damage the hook.
Hook
■ Rear
Hooks
178
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Sunglasses Holder
To open the sunglasses holder, push and release the indent. To close, push it again until it latches.
Push
You can store eyeglasses and other small items in this holder.
1Sunglasses Holder
Keep the holder closed while driving except when accessing stored items.
■ Conversation mirror * The sunglasses holder comes with a mirror. Open the sunglasses holder fully, then push it back to the first detent. You can use the mirror to view the rear seats.
* Not available on all models
Continued
179
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Seat Heaters*
The ignition switch must be in ON (w to use the seat heaters. The HI setting heats the seats faster than the LO setting.
There is no heater in the passenger's seat- back due to the side airbag cutoff system.
The appropriate indicator will be on while the seat heater is on. Each time you press the switch, the mode changes to HI, LOW and OFF.
1Seat Heaters*
3WARNING
Heat induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.
Do not use the seat heaters even in LO when the engine is off. Under such conditions, the battery may be weakened, making the engine difficult to start.
180
* Not available on all models
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
■ Integrated Sunshades*
Second Row
Hooks
■ Second row sunshades Pull the tab and roll up the sunshade all the way. Use the hooks to hang it.
Use the sunshades only when the windows are fully closed. Using the shade while a window is open can unhook and blow off the shade, hitting and hurting anyone sitting near the window.
1Integrated Sunshades *
■ Third row sunshades Pull the tab and roll up the sunshade all the way. Attach the tab to the hook.
Tab
Third Row Hook
Tab
* Not available on all models
181
Heating and Cooling *
Using Vents, Heating and A/C
Fan Control Dial Adjusts the fan speed.
Dashboard vents
Dashboard and floor vents
Floor vents
Floor and defroster vents
Temperature Control Dial Adjusts the interior temperature.
(On/Off) Button
A/C Button Press to cool the interior or dehumidify while heating.
MODE Button Change airflow.
Button
Turns on the A/C, selects airflow from the dashboard vents, and switches the mode to recirculation.
182
* Not available on all models
(Recirculation) Button
button and switch
Press the the mode depending on environmental conditions.
Recirculation Mode (indicator on): Recirculates air from the vehicle’s interior through the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in fresh air mode in normal situations.
Windshield Defroster Button Turns on the A/C, selects airflow from the defroster vents at the base of the windshield, and switches the mode to fresh air.
■ Heating
The heater uses heat from the engine coolant to warm the air. 1. Adjust the fan speed using the fan control
dial.
2. Press the mode button to select 3. Adjust the temperature using the
temperature control dial.
■ To rapidly warm up the interior 1. Set the fan to the maximum speed. 2. Select 3. Set the temperature to maximum heat. 4. Press the
button (indicator on).
uuHeating and Cooling *uUsing Vents, Heating and A/C
1Heating
When you select switches to fresh air.
, the mode automatically
1To rapidly warm up the interior
Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode.
■ To dehumidify the interior When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up. 1. Adjust the fan speed using the fan control dial. 2. Press the A/C button to turn on the air conditioning. 3. Select 4. Adjust the temperature using the temperature control dial.
Continued
183
uuHeating and Cooling *uUsing Vents, Heating and A/C
■ Cooling
1. Adjust the fan speed using the fan control
dial.
2. Press the mode button to select 3. Adjust the temperature using the
temperature control dial.
4. Press the A/C button (indicator on).
■ To rapidly cool down the interior 1. Set the fan to the maximum speed. 2. Set the temperature to maximum cool. 3. Press the
button (indicator on).
1To rapidly cool down the interior
If the interior is very warm, you can cool it down more rapidly by partially opening the windows.
■ Defrosting the Windshield and Windows
button turns the air
Pressing the conditioning system on and automatically switches the system to fresh air mode.
■ To rapidly defrost the windows 1. Set the fan to the maximum speed. 2. Press the 3. Press the 4. Set the temperature to maximum heat.
button. button.
1Defrosting the Windshield and Windows
For your safety, make sure you have a clear view through all the windows before driving. Do not set the temperature near the upper or lower limit. When cold air hits the windshield, the outside of the windshield may fog up. If the side windows fog up, adjust the vents so that the air hits the side windows.
1To rapidly defrost the windows
After defrosting the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.
184
uuHeating and Cooling *uRear A/C Controls
Rear A/C Controls
Rear ceiling vents
Rear floor vents
Rear ceiling vents and floor vents
Rear Temperature Control Button
Rear Temperature Control Button
Mode Button
(Rear On/Off)
Button
(Rear
Fan Control) Buttons
Use the system when the engine is running. 1. Press the 2. Adjust the temperature and the fan speed using the appropriate buttons. Select
button.
the air flow to the rear passenger compartment using the mode button.
3. To turn off the rear A/C, press the
button again.
185
Climate Control System *
Using Automatic Climate Control The automatic climate control system maintains the interior temperature you select. The system also selects the proper mix of heated or cooled air that raises or lowers the interior temperature to your preference as quickly as possible.
Floor and defroster vents
Floor vents
Dashboard and floor vents
Dashboard vents
MODE Button
AUTO Button
Driver’s Side Temperature Control Dial
SYNC (Synchronized) Button
(On/Off) Button
(Recirculation) Button Passenger’s Side Temperature Control Dial (Windshield
Defroster) Button A/C (Air Conditioning) Button (Fan Control) Buttons
button to cancel.
Use the system when the engine is running. 1. Press the AUTO button. 2. Adjust the interior temperature using the temperature control dial. 3. Press the ■ Switching between the recirculation and fresh air modes Press the button and switch the mode depending on environmental conditions. Recirculation Mode (indicator on): Recirculates air from the vehicle’s interior through the system. Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in fresh air mode in normal situations.
186
* Not available on all models
1Using Automatic Climate Control
If any buttons are pressed while using the climate control system in auto, the function of the button that was pressed will take priority. The AUTO indicator will go off, but functions unrelated to the button that was pressed will be controlled automatically.
The compressor may turn on to prevent window fogging, even if the display reads A/C OFF.
To prevent cold air from blowing in from outside, the fan may not start immediately when the AUTO button is pressed.
Once you have set the desired temperature, do not use the temperature control dials more than necessary. Doing so may delay the time it takes to reach the set temperature.
If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning the system on auto, and setting the temperature to low. Change the fresh air mode to recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper limit, Lo or Hi is displayed.
button switches the climate
Pressing the control system between on and off. When turned on, the system returns to your last selection.
■ Defrosting the Windshield and Windows
button turns the air