2011 Honda Odyssey Owners Manual

a message to choose the left or right side of the screen to be displayed will appear. Turn the interface dial and press the ENTER button to set your selection.

CONTINUED

449

2011 Odyssey10/07/17 10:34:32 31TK8600_455

Ultrawide Rear Entertainment System

Thedualscreenmodesare:

Source change

−

Single mode

SINGLE MODE DVD

Press AUX button.

Press AUX button.

AUX-VIDEO

AUX-HDMI

Select ‘‘AUX-VIDEO.’’

Select ‘‘AUX-HDMI.’’

Press SOURCE or SINGLE button.

Select Other Source. (Disc, radio, XM, etc.)

Select ‘‘RIGHT.’’

Select ‘‘AUX-VIDEO.’’

DUAL MODE

DVD

AUX-VIDEO

DUAL MODE

AUX-VIDEO

DVD

Select ‘‘LEFT.’’

Select ‘‘AUX-VIDEO.’’

Single mode to Dual mode

SINGLE MODE DVD

Press DUAL button.

450

2011 Odyssey10/07/17 20:21:28 31TK8600_456

Dual mode to Single mode

DUAL MODE

DVD

AUX1

Press SINGLE button.

Ultrawide Rear Entertainment System

SINGLE MODE DVD

Select ‘‘DVD.’’

AUX-VIDEO

Swap source

DUAL MODE DVD

AUX-VIDEO

Select ‘‘AUX-VIDEO.’’

Press SWAP button.

AUX-VIDEO

DVD

451

2011 Odyssey10/07/17 10:34:48 31TK8600_457

Ultrawide Rear Entertainment System

To Play the Radio from the Rear Control Panel To listen to the radio, press the SOURCE button for the selectable sources to appear in the overhead screen. Turn the interface dial to select ‘‘AM,’’ ‘‘FM1’’ or ‘‘FM2,’’ then press the ENTER button.

Press the MENU button to display the Audio Menu on the overhead screen. You can enter the highlighted function by pressing the ENTER button. These functions have the same features as those of the front audio system. You can press and hold either side (

or

) of the TUNE/SKIP bar to

skip (seek) up/down, and press either side ( ) of the TUNE/SKIP bar to tune up/down.

of

452

OVERHEAD SCREEN

To Play the XM Radio from the Rear Control Panel Press the SOURCE button and turn the interface dial to ‘‘XM1’’ or ‘‘XM2.’’ Press ENTER to listen to the XM Radio. You can press either side bar to scroll up/down and select channels within a category (in CATEGORY mode), or to scroll up/ down and select from among all available channels (in CH mode).

) of the TUNE/SKIP

or

REAR CONTROL PANEL

Press the MENU button to display the audio menu on the overhead screen. You can enter the highlighted function by pressing the ENTER button. These functions have the same features as those of the front audio system.

Pressing and holding the TITLE/ SCROLL button for 5 seconds enables you to switch between search modes.

2011 Odyssey10/07/17 10:34:57 31TK8600_458

Ultrawide Rear Entertainment System

To Play a Disc, HDD, USB, or iPod from the Rear Control Panel Use the interface dial to highlight REPEAT, RANDOM (or SHUFFLE if your source is iPod), or SCAN on the screen. You can enter the highlighted function by pressing the ENTER button. These functions have the same features as those of the front audio system.

When the TITLE/SCROLL button is pressed, the title scrolls for about 10
seconds. When it is pushed again, scrolling stops.

To Play a DVD from the Rear Control Panel The video screen is for use by rear seat passengers only. The driver and front seat passenger should not try to view the screen while driving.

Open the overhead screen by pushing the OPEN button. The screen will swing down part-way. Pivot the screen the rest of the way. If you pivot the screen too far forward, past the second detent. The display will turn off. Pivot the screen back to the second or first detent to turn the display back on. To close the screen, pivot it up until it latches.

Press the want to pause the DVD. Press this button again to go back to PLAY.

button when you

Press the button to skip to the beginning of the next chapter. Press the beginning of the current chapter.

button to return to the

Press the to go to the previous chapter.

button again quickly

To move rapidly within a chapter, press and hold the

or

button. The system will continue to move through the chapter. Press the move forward, or the button to move backward. Release the button when the system reaches the point you want.

button to

To select the menu on the DVD, press the MENU button. Use the interface dial to turn to the desired menu selection, then press the ENTER button to enter your selection.

453

2011 Odyssey10/07/17 10:35:07 31TK8600_459

Ultrawide Rear Entertainment System

TITLE/SCROLL Button

MENU Button

Top Menu

When you press the TITLE/ SCROLL button while a DVD is playing, the current status of title, chapter, elapsed time, angle, subtitle, audio, and sound characteristics are displayed. To return to the DVD video screen, press the TITLE/ SCROLL button again.

When you press the MENU button while a DVD is playing, the DVD Menu appears. The menu options are TOP MENU, MENU, PLAY MODE, SEARCH/NUMINPUT, REPEAT, PAUSE/PLAY, and STOP.

To go to your selected menu, use the interface dial to highlight the icon and press the ENTER button. To return to the DVD video screen, select RETURN.

454

When you select ‘‘TOP MENU,’’ the screen changes to the DVD’s title menu. This menu also appears when you press the MENU button while a DVD is not playing. To go back to play, press the MENU or CANCEL button.

2011 Odyssey10/07/17 10:35:16 31TK8600_460

Menu

Play Mode

‘‘Audio’’

Ultrawide Rear Entertainment System

When you select ‘‘MENU’’ with the interface dial, the screen changes to the DVD’s title menu.

When you select ‘‘PLAY MODE’’ with the interface dial, you can change the DVD’s Audio, Subtitle or Angle setting.

or

▼ ▲

To change the Audio setting, highlight ‘‘Audio’’ from the play mode menu with the button. A submenu of the dubbed language appears. You can select another language by turning the interface dial. The sound characteristics (Dolby Digital, LPCM, MPEG Audio, dts) recorded with the selected language are also displayed next to the language.

CONTINUED

455

2011 Odyssey10/07/17 10:35:24 31TK8600_461

Ultrawide Rear Entertainment System

The selectable languages vary from DVD to DVD, and this feature may not be available on some DVDs.

To go back to play, press the MENU or CANCEL button.

‘‘Subtitle’’

‘‘Angle’’

To change the DVD’s subtitle, highlight ‘‘Subtitle’’ from the play mode menu with the You can see the available subtitles with the interface dial.

▼ ▲

or

button.

To change the view angle, highlight ‘‘Angle’’ from the play mode menu with the the available angle options with the interface dial.

button. You can see

▼ ▲

or

To go back to play, press the MENU or CANCEL button.

If there are no multiple angles available on the DVD, you cannot change from ‘‘Angle 1.’’

To go back to play, press the MENU or CANCEL button.

456

2011 Odyssey10/07/17 10:35:34 31TK8600_462

Search

‘‘Title/ChapterSearch’’

NumInput

Ultrawide Rear Entertainment System

Highlight ‘‘SEARCH’’ with the interface dial to select ‘‘Title,’’ ‘‘Chapter,’’ or ‘‘NumInput’’ and press ENTER.

With ‘‘Title’’ highlighted, use the interface dial to jump to your desired title and press the ENTER button. When ‘‘Chapter’’ is highlighted, follow the same procedure for the chapter search.

A numerical command can be issued to a DVD by inputting a three digit number, and a button number can be selected on the screen.

Highlight ‘‘NumInput’’ with the button. Press the

or

ENTER button to go to the NumInput selection screen.

CONTINUED

457

2011 Odyssey10/07/17 10:35:43 31TK8600_463

Ultrawide Rear Entertainment System

Repeat

SETUP Button

Rotate the interface dial to select each number, then press the ENTER button. Press the you have finished inputting the number. If you want to delete a number, press the button.

button when

To go back to the DVD screen, press the MENU or CANCEL button or select RETURN and press the ENTER button.

458

REPEAT ICON

With ‘‘Repeat’’ highlighted, each time you press and release the ENTER button, the repeat mode changes from chapter repeat to title repeat, and to repeat off.

When you press the SETUP button while a DVD is playing, the setup menu appears. The menu options are ‘‘Brightness,’’ ‘‘Display Adjust,’’ ‘‘Aspect Ratio,’’ ‘‘Appearance,’’ ‘‘PERSONAL SURROUND,’’ and ‘‘Language.’’ To change a setup, use the interface dial to highlight your selection and press the ENTER button. To return to the DVD video screen, press the SETUP or CANCEL button.

2011 Odyssey10/07/17 10:35:50 31TK8600_464

Brightness

To adjust the brightness of the display, highlight ‘‘Brightness’’ from the setup menu with the interface dial and press the ENTER button. Adjust the setting by turning the interface dial.

To go back to play, press the MENU or CANCEL button.

Ultrawide Rear Entertainment System

Display Adjust To adjust the display, highlight ‘‘Display Adjust’’ from the setup menu with the interface dial and press the ENTER button. You can adjust these display settings:

Contrast Black Level Color Tint Reset

Select the quality you want to adjust by turning the interface dial. Adjust the setting by turning the interface dial. To go back to the Display Adjust screen, press the ENTER or CANCEL button.

CONTINUED

459

2011 Odyssey10/07/17 10:35:59 31TK8600_465

Ultrawide Rear Entertainment System

Aspect Ratio Select the ‘‘Aspect Ratio’’ by turning the interface dial, then press the ENTER button. You can choose between ‘‘Wide’’ or ‘‘Zoom.’’ The following settings are available:

Wide

Normal Full Super Full Ultra Full

Zoom

Super Zoom Ultra Zoom

If you want to set the display to the default setting, select ‘‘Reset’’ by turning the interface dial, and then pressing the ENTER button.

The display changes as shown above.

Select ‘‘Yes,’’ and press the ENTER button. You will see the message ‘‘Default display settings applied’’ on the display for a few seconds.

460

2011 Odyssey10/07/17 10:36:07 31TK8600_466

Wide

Zoom

Ultrawide Rear Entertainment System

The selected setting will be highlighted in blue for 1 second, and the screen returns to the play mode in the selected setting.

Select ‘‘Wide’’ by turning the interface dial then press the ENTER button. The available settings are displayed, and the current setting is highlighted in blue. Select the desired setting by turning the interface dial, then press the ENTER button.

Select ‘‘Zoom’’ by turning the interface dial then press the ENTER button. The available settings are displayed, and the current setting is highlighted in blue. Select the desired setting by turning the interface dial, then press the ENTER button.

CONTINUED

461

2011 Odyssey10/07/17 10:36:13 31TK8600_467

Ultrawide Rear Entertainment System

The selected setting will be highlighted in blue for 1 second, and the screen returns to the play mode in the selected setting.

Appearance

Personal Surround

You can change the color of the menu screen to white, black, blue, brown, or red. It can be also synchronized with the front navigation system. Rotate the interface dial to the setting you want, then press the ENTER button.

To change the personal surround setting, highlight ‘‘Personal Surround’’ from the setup menu with the interface dial and press the ENTER button. The effect selection appears.

462

2011 Odyssey10/07/17 10:36:22 31TK8600_468

Select ‘‘Music,’’ ‘‘Cinema,’’ or ‘‘Voice’’ by turning the interface dial, and enter your selection by pressing the ENTER button.

If you select ‘‘Off,’’ there will be no special sound effect.

Ultrawide Rear Entertainment System

Language

INITIAL SETTINGS Menu

You can change the display language to English, French, or Spanish. Rotate the interface dial to the setting you want, then press the ENTER button.

When you press the MENU button on the rear control panel when a DVD is not playing, the ‘‘INITIAL SETTINGS’’ menu is displayed.

There are three selectable menus: ‘‘Language Settings,’’ ‘‘Dynamic Range,’’ and ‘‘Angle Mark.’’

CONTINUED

463

2011 Odyssey10/07/17 10:36:32 31TK8600_469

Ultrawide Rear Entertainment System

INITIALSETTINGS(Language)

Menu Language

To select the language used in the DISC menus, select ‘‘Menu Language’’ by pressing the button.

▼ ▲

or

Select the desired language by turning the interface dial, and then pressing the ENTER button.

The selectable languages are, English, French, Spanish, Arabic, German, Italian, Dutch, Chinese, Korean, Thai, Japanese or others.

If you want another language than those listed, you need to enter the code number of the desired language. Select ‘‘other,’’ and press the ENTER button. The display changes as shown in the next column.

When you select ‘‘Language Settings’’ with the interface dial, the menu shown above appears.

To return to the stop or previous screen, press the CANCEL button.

Because the priority language is determined by each disc you insert, you might not be able to set a selected item.

464

2011 Odyssey10/07/17 10:36:40 31TK8600_470

Ultrawide Rear Entertainment System

If you select ‘‘No,’’ and press the ENTER button, the display returns to the initial screen of the ‘‘Language Settings’’ menu.

If you select ‘‘Yes,’’ the display changes to the language code input mode. Select the first digit using the interface dial, and press the ENTER button to enter it. Repeat this until all four digits are filled. Press the

button on the control panel to

enter the new language code.

If you made a mistake entering a number digit, press the button on the control panel. Then select and enter the correct digit as described. The display returns to the initial ‘‘Language Settings’’ menu screen.

CONTINUED

465

2011 Odyssey10/07/17 10:36:48 31TK8600_471

Ultrawide Rear Entertainment System

Audio Language

Subtitle Language

Dynamic Range ‘‘Dynamic Range’’ reduces the differences between the loud and quiet sound levels throughout the disc. When this is on, the louder sounds are lowered, and quieter sounds are increased.

You can select the dubbed language before playing DVDs. Select ‘‘Audio Language’’ by pressing the

button.

▼ ▲

or

You can select the subtitle language before playing DVDs. Select ‘‘Subtitle Language’’ by pressing the button.

▼ ▲

or

Follow the same instructions you used to set the menu language.

Follow the same instructions you used to set the menu language.

466

2011 Odyssey10/07/17 10:36:56 31TK8600_472

Ultrawide Rear Entertainment System

Angle Mark

ANGLE MARK

Select the ‘‘Dynamic Range’’ by turning the interface dial.

To turn ‘‘Dynamic Range’’ on or off, select ‘‘ON’’ or ‘‘OFF’’ by turning the interface dial, and then press the ENTER button.

When you switch to another angle while playing a DVD, the angle mark is displayed in the lower right corner of the screen.

You can set the system to display or not display this angle mark.

Select the ‘‘Angle Mark’’ by turning the interface dial. If you want the angle mark to be displayed, select ‘‘ON’’ by turning the interface dial, and then press the ENTER button.

467

2011 Odyssey10/07/17 10:30:33 31TK8600_427

Ultrawide Rear Entertainment System

The DVD player can also play discs recorded in MP3/WMA/AAC formats and DTS CDs.

Those packages or jackets should also bear the designation of ‘‘1’’ or ‘‘ALL’’ region. DVD-ROMs cannot be played in this system.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.

Playable DVDs

There are various types of DVDs available. Some of them are not compatible with your system.

The DVD player in your rear entertainment system can play DVDs and CDs bearing the above marks on their packages or jackets.

468

＃

’s: 5,451,942; 5,956,674;

Manufactured under license under U.S. Patent 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the the Symbol are registered trademarks and DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.

Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Protecting DVDs The tips on how to handle and protect DVDs are basically the same as those for compact discs. Refer to ‘‘Protecting Your CDs’’ on page 352

2011 Odyssey10/07/17 10:37:14 31TK8600_474

DVD Player Error Messages Onvehicleswithnavigationsystem The chart on the right explains the error messages you may see in the display while playing a disc.

If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.

The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc.

Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

Ultrawide Rear Entertainment System

Error Message

Cause

Solution

DISC ERROR

FOCUS Error

MECH ERROR

Mechanical Error

HEAT ERROR

High Temperature

REGION ERR

UNSUPPORTED

Invalid region code DVD format not supported

PUSH EJECT

BAD DISC

PLEASE CHECK

Mechanical Error

OWNERS MANUAL

Press the disc eject button, and remove the disc. Check for an error indication. Insert the disc again. If the code does not disappear, consult your dealer. Will disappear when the temperature returns to normal. The disc is not playable in this unit. Eject the disc, and insert a disc compatible with this system. Press the EJECT button and pull out the disc. Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 353). Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player.

469

2011 Odyssey10/07/17 10:37:23 31TK8600_475

Ultrawide Rear Entertainment System

Remote Control

Replacing the Remote Control Batteries

COVER

RELEASE BUTTON

The rear control panel can be detached from the ceiling unit and used as a remote control. To remove it from the ceiling unit, press the release button. The control panel will swing down partway. Pivot it down further past the detent until it detaches from the hinge. To reinstall it, reverse the procedure.

470

If it takes several pushes on the button to operate the rear entertainment system, have your dealer replace the batteries as soon as possible. Battery type: BR3032
An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

2011 Odyssey10/07/17 10:37:29 31TK8600_476

Wireless Headphones

Ultrawide Rear Entertainment System

To use the headphones, pivot the earpieces outward. This turns them on. To adjust the volume, turn the dial on the bottom of the right earpiece. When you remove the headphones, the earpieces automatically pivot inward, and the headphones turn off. When not in use, store the headphones in the pocket of either front seat.

VOLUME DIAL

Some state and local government agencies prohibit the use of headphones by the driver of a motor vehicle. Always obey applicable laws and regulations.

The audio for the rear entertainment system is sent to the wireless headphones that come with the system. When using the headphones, make sure you wear them correctly: L (left) and R (right) are marked on the sides of the frame. Wearing the headphones backwards may affect audio reception, limiting the sound quality and range.

CONTINUED

471

2011 Odyssey10/07/17 10:37:38 31TK8600_477

Ultrawide Rear Entertainment System

ChangingtheSoundSource In the dual screen mode, you can switch the sound source of the headphones between the left and right side screens.

WiredHeadphones

WIRED HEADPHONES INDICATOR

WIRED HEADPHONES

If you connected a set of wired headphones, you can switch the sound source from the setup menu.

When you press the SETUP button while the overhead screen is in the dual mode, the setup menu appears. Turn the interface dial to select ‘‘Wired Headphones.’’ Press the ENTER button.

The screen changes to the wired headphones setup menu. Select ‘‘Left’’ or ‘‘Right’’ and press the ENTER button to switch the sound source. The wired headphones indicator appears on the selected side screen.

TAB

Slide the tab to ‘‘L’’ for the left side, ‘‘R’’ for the right side.

472

2011 Odyssey10/07/17 10:37:46 31TK8600_478

ReplacingBatteries

COVER

Auxiliary Input Jacks

Ultrawide Rear Entertainment System

COIN

Each headphone uses one AAA battery. The battery is under the cover on the left earpiece. To remove the cover, insert a coin in the slot and twist it slightly to pry the cover away from the earpiece. Pull the cover outward, and pivot it out of the way.

BATTERY

Remove the battery. Install the new battery in the earpiece as shown in the diagram next to the battery slot. Slide the cover back into place on the earpiece, then press down on the back edge to lock it in place.

An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.

Auxiliary input jacks and headphone connectors for the rear entertainment system are above the third row seat armrest on the driver’s side.

CONTINUED

473

2011 Odyssey10/07/17 10:37:53 31TK8600_479

Ultrawide Rear Entertainment System

VOLUME DIALS

HDMI Input Jack

AUXILIARY INPUT JACKS

HEADPHONE CONNECTORS

The system will accept auxiliary inputs from standard video games and video equipment. Some video game power supplies may cause poor picture quality.

There are two headphone connectors for the third row seat passengers. Each connector has its own volume control.

V = Video jack L = Left audio jack R = Right audio jack

474

There is an HDMI input jack above the third row seat armrest on the passenger’s side. The system will accept HDMI input from video games and video equipment which are equipped with an HDMI jack.

To use the HDMI input jack, open the outlet cover and insert the cable.

2011 Odyssey10/07/19 15:54:24 31TK8600_480

OnEXandEX-Lmodelswithout navigationsystem Compass Operation Compass operation can be affected by driving near power lines or stations, across bridges, through tunnels, over railroad crossings, past large vehicles, or driving near large objects that can cause a magnetic disturbance. It can also be affected by accessories such as antennas and roof racks that are mounted by magnets.

When you turn the ignition switch to the ON (II) position, the compass is self-calibrating, then the compass display is shown in the display.

Compass

Compass Calibration

U.S. EX models

U.S. EX models

EX-L and Canadian EX models

EX-L and Canadian EX models

The compass may need to be manually calibrated after exposure to a strong magnetic field. If the compass seems to be continually showing the wrong direction and is not self-calibrating, or the compass display is blinking with the CAL indicator on, do the following procedure.

Do this procedure in an open

NOTE: area, away from buildings, power lines, and other vehicles.

1.

Turn the ignition switch to the ON (II) position.

2.

Press and hold the SETUP button for about 5 seconds. The display shows you the compass setting menu items.

CONTINUED

475

2011 Odyssey10/07/19 15:54:33 31TK8600_481

Compass

U.S. EX models

U.S. EX models

EX-L and Canadian EX models

EX-L and Canadian EX models

3.

Turn the selector knob to select ‘‘CALIBRATION.’’

4.

Press the selector knob to enter your selection. The display shows you ‘‘PUSH CAL START’’ or ‘‘Start Calibration.’’

While setting the compass, press the RETURN button to go back to the previous display. Pressing the SETUP button will cancel the compass setting mode.

476

5.

Press the selector knob. The compass display is blinking and the CAL indicator is shown.

6.

Drive the vehicle slowly in two complete circles.

When the calibration is successfully completed, the CAL indicator goes off and the compass display will stop blinking and show an actual heading.

The audio system is not related to the compass system. Even if the compass system is calibrating, the display returns to the normal display which you last selected.

2011 Odyssey10/07/19 15:54:44 31TK8600_482

Compass Zone Selection In most areas, there is a variation between magnetic north and true north. Zone selection is required so the compass can compensate for this variation. To check and select the zone, do this:

1.

Turn the ignition switch to the ON (II) position.

2.

3.

Press and hold the SETUP button for about 5 seconds. The display shows you the compass setting menu items.

Turn the selector knob to select ‘‘ZONE’’ or ‘‘Zone Adjust.’’ Press the selector knob to enter your selection. The display shows you the currently selected zone number.

Compass

U.S. EX models

U.S. EX models

EX-L and Canadian EX models

EX-L and Canadian EX models

4.

Find the zone for your area on the map (see page ). If the correct zone is not shown, turn the selector knob to cycle the zone lists up or down.

478

If necessary, press the RETURN button to return to the previous display. Pressing the SETUP button will cancel the compass setting mode.

5.

Once the correct zone is displayed, press the selector knob. The display then returns to normal.

CONTINUED

477

2011 Odyssey10/07/17 10:38:31 31TK8600_483

Compass

The audio system is not related to the compass system. Even if the compass system is in the zone setting mode, the display returns to the normal display which you last selected.

Zone Map

478

2011 Odyssey10/07/17 10:38:38 31TK8600_484

OnallmodelsexceptLX The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights, and taillights flash if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then the system resets. To reset an activated system before the 2
minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and the tailgate. For the system to activate, you must lock the doors and the tailgate from the outside with the key, driver’s lock tab, door lock master switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.

Security System

The alarm will also be activated if a passenger inside the locked vehicle turns the ignition switch on.

The security system will not set if the hood, tailgate, or any door is not fully closed. Before you leave the vehicle, make sure the doors, tailgate, and hood are securely closed.

To see if the system is set

NOTE: after you exit the vehicle, press the LOCK button on the remote transmitter within 5 seconds. If the system is set, the horn will beep once.

Do not attempt to alter this system or add other devices to it.

479

SECURITY SYSTEM INDICATOR

Once the security system is set, opening any door, the tailgate, or the hood without using the key or the remote transmitter, will cause it to alarm. It also alarms if the audio unit is removed from the dashboard or the wiring is cut.

2011 Odyssey10/07/17 10:38:46 31TK8600_485

Cruise Control

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

480

Using Cruise Control

CRUISE BUTTON

RES/ACCEL BUTTON

CANCEL BUTTON

SET/DECEL BUTTON

1.

Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

3.

Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

Cruise control may not hold the set speed when you are going up and down hills. If your vehicle speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on.

2011 Odyssey10/07/17 10:38:55 31TK8600_486

Changing the Set Speed You can increase the set speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired speed, release the button.

Push on the accelerator pedal. Accelerate to the desired cruising speed, then press the SET/ DECEL button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h).

You can decrease the set speed in any of these ways:

If you need to decrease your NOTE: speed quickly, use the brakes as you normally would.

Press and hold the SET/DECEL button. Release the button when you reach the desired speed.

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Tap the brake pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel will go out. When the vehicle slows to the desired speed, press the SET/ DECEL button.

Cruise Control

Even with cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set speed.

Resting your foot on the brake pedal causes cruise control to cancel.

481

2011 Odyssey10/07/17 10:39:02 31TK8600_487

Cruise Control

Canceling Cruise Control You can cancel cruise control in any of these ways:

Tap the brake pedal. Push the CANCEL button on the steering wheel. Push the CRUISE button on the steering wheel.

The cruise control will be canceled when the vehicle speed reaches about 25 mph (40 km/h) or less.

Resuming the Set Speed When you push the CANCEL button or tap the brake pedal, the system remembers the previously set speed. To return to that speed, accelerate to above 25 mph (40 km/h), then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on. The vehicle accelerates to the same speed as before.

Pressing the CRUISE button turns the system completely off and erases the previous set speed.

482

2011 Odyssey10/07/17 10:39:12 31TK8600_488

HomeLink Universal Transceiver

OnallmodelsexceptLX The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

General Information Before programming your HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an ‘‘electronic eye,’’ or other safety and reverse stop features.

If your garage door was manufactured before April 1, 1982, you may not be able to program HomeLink to operate it. These units do not have safety features that cause the motor to stop and reverse it if an obstacle is detected during closing, increasing the risk of injury.

Do not use HomeLink with any garage door opener that lacks safety stop and reverse features.

Units manufactured between April 1, 1982 and January 1, 1993 may be equipped with safety stop and reverse features. If your unit does not have an external entrapment protection system, an easy test to confirm the function and performance of the safety stop and reverse feature is to lay a 2
under the closing door. The door should stop and reverse upon contacting the piece of wood. As an additional safety feature, garage door openers manufactured after January 1, 1993 are required to have external entrapment protection systems, such as an electronic eye, which detect an object obstructing the door.

×

Important Safety Precautions Refer to the safety information that

came with your garage door opener to test that the safety features are functioning properly. If you do not have this information, contact the manufacturer of the equipment. Before programming HomeLink to a garage door or gate opener, make sure that people and objects are out of the way of the device to prevent potential injury or damage. When programming a garage door opener, park just outside the garage.

−

If you just

Training HomeLink Beforeyoubegin received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button. To do this, press and hold the two outside buttons on the HomeLink transceiver for about 20 seconds, until the red indicator flashes. Release the buttons, then proceed to step 1. CONTINUED

483

2011 Odyssey10/07/17 10:39:24 31TK8600_489

HomeLink Universal Transceiver

If you are training the second or third buttons, go directly to step 1.

484

2011 Odyssey10/07/17 10:39:29 31TK8600_490

HomeLink is a registered trademark of Johnson Controls, Inc.

HomeLink Universal Transceiver

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

485

2011 Odyssey10/07/19 15:58:31 31TK8600_491

Parking Sensor System

OnTouringmodelsandCanadianEX-L models Your vehicle has a parking sensor system. The system lets you know the approximate distance between your vehicle and most obstacles while you are parking. When the system is on and your vehicle is nearing an obstacle, you will hear a beeping and see parking sensor indicators on the multi-information display or the instrument panel, depending on models.

486

All obstacles may not always be sensed. Even when the system is on, you should look for obstacles near your vehicle to make sure it is safe to park.

The system has two front corner sensors, two rear corner sensors, and two rear center sensors.

The rear center sensors work when the shift lever is in reverse (R), and the vehicle speed is less than 5 mph (8 km/h).

The corner sensors work only when the shift lever is in any position other than P and the vehicle speed is less than 5 mph (8 km/h).

PARKING SENSOR SYSTEM SWITCH

To activate the system, push the switch on the dashboard with the ignition in the ON (II) position. The indicator in the switch comes on when the system is on. To turn the system off, push the switch again.

2011 Odyssey10/07/19 15:58:37 31TK8600_492

Indicators and Beeper Operation on the Multi-Information Display/Instrument Panel/Audio Screen

Multi-Information Display

When you turn the system on, a beeper sounds once.

Parking Sensor System

Instrument Panel

Audio Screen

When the system senses an obstacle, the appropriate indicator comes on, and a beeper sounds as shown in the following tables.

The parking sensor indicators are automatically displayed on the audio screen when an obstacle is detected.

CONTINUED

487

2011 Odyssey10/07/19 15:58:45 31TK8600_493

Parking Sensor System

CornerSensorOperation Example shown: Obstacle is at the left front of the vehicle.

About 18-24 in (45-60 cm)

About 14-18 in (35-45 cm)

About 14 in (35 cm) or less

Distance

Indicator

Beeper

Audio Screen Indicator Color

488

Upper left indicator stays on.

Indicator blinks. INDICATOR

INSTRUMENT PANEL

MULTI-INFORMATION DISPLAY

AUDIO SCREEN

Short beeps

Very short beeps

Amber

Continuous beeps

Red

2011 Odyssey10/07/19 15:58:53 31TK8600_494

RearCenterSensorOperation

About 28-43 in (70-110 cm)

About 22-28 in (55-70 cm)

About 18-22 in (45-55 cm)

About 18 in (45 cm) or less

Parking Sensor System

Distance

Indicator

Beeper

Audio Screen Indicator Color

Bottom indicator stays on.

Indicator blinks.

INSTRUMENT PANEL

MULTI-INFORMATION DISPLAY

AUDIO SCREEN

INDICATOR

Long beeps

Short beeps

Very short beeps

Yellow

Amber

Continuous beeps

Red

CONTINUED 489

2011 Odyssey10/07/19 15:58:59 31TK8600_495

Parking Sensor System

Onmodelswithmulti-information display If the system develops a problem, you will see a ‘‘CHECK PARKING SENSOR SYSTEM’’ message on the multi-information display, and a beeper sounds continuously.

CanadianEX-Lmodels If the system develops a problem, you will see all parking sensor indicators on the instrument panel, and a beeper sounds continuously.

If there is a problem with any of the operational sensors, the indicators for these sensors will appear constantly in red.

Very often, a sensor covered with mud, ice, snow, etc. is the cause of this display. Check the sensors first. If the indicators stay on or the beeper does not stop, have the system checked by your dealer.

490

2011 Odyssey10/07/17 10:40:15 31TK8600_496

Within about 24 in (60 cm)

Within about 43 in (1.1 m)

The range of the corner sensors and the rear center sensor are limited. Each corner sensor is capable of sensing an obstacle only when your vehicle is 24 in (60 cm) or closer. The rear center sensor senses an obstacle that is behind your vehicle 43 in (1.1 m) or closer.

Do not put any accessories on or around the sensors.

The system may not function properly under these conditions: The sensors are covered with snow, ice, mud, etc. When the vehicle is on a rough road, on grass, or on a hill. After the vehicle has been sitting out in hot or cold weather.

Parking Sensor System

When the system is affected by some electrical equipment or devices generating an ultrasonic wave. When operating the vehicle in bad weather.

The system may not sense thin or low objects, or sonic-absorptive materials such as snow, cotton, or sponge.

The system cannot sense objects directly under the bumper.

CONTINUED

491

2011 Odyssey10/07/17 10:40:23 31TK8600_497

Parking Sensor System

Toturnoffallrearsensors The parking sensor system must be turned off before beginning this procedure.

When you shift to reverse (R), the LED indicator in the switch will blink as a reminder that the rear sensors are disabled.

1.

2.

3.

Press and hold the parking sensor system switch and then turn the ignition switch to the ON (II) position.

To return to the original setting, repeat the procedure. A beeper will sound 3 times to confirm that the rear sensors are now enabled.

Keep pressing the switch for 10
seconds. The LED indicator in the switch will flash.

Press the switch again and the LED indicator will turn off. A beeper will sound twice to confirm that the rear sensors are now disabled.

CanadianOwners: ThisdevicecomplieswithIndustry CanadaStandardRSS-210.Operationis subjecttothefollowingtwoconditions: (1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

ThisISMdevicecomplieswithCanadian ICES-001.

492

2011 Odyssey10/07/17 10:40:30 31TK8600_498

OnCanadianEXandEX-Lwithout navigationsystem

SCREEN DISPLAY

ACTUAL DISTANCE

Whenever you shift to reverse (R) with the ignition switch in the ON (II) position, the rearview is shown on the display.

Rearview Camera and Monitor

The camera display has parking guidelines that indicate distance from your vehicle.

1st Line 2nd Line 3rd Line 4th Line

20 in (0.5 m) 39 in (1 m) 79 in (2 m) 118 in (3 m)

CanadianEX-Lmodels The parking sensor indicators are automatically displayed on the audio screen when an obstacle is detected.

1st Line 2nd Line

3rd Line

4th Line

CONTINUED

493

2011 Odyssey10/07/17 10:40:37 31TK8600_499

Rearview Camera and Monitor

To turn off the guidelines, press and hold the RETURN button for about 3
seconds.

OnmodelswithNavigationSystem Refer to the navigation system manual for operation of the rearview camera.

NOTE:

For the best picture, always keep the rearview camera clean, and do not cover the camera lens. To avoid scratching the lens when you clean it, use a moist, soft cloth. The rearview camera has a unique lens that makes objects appear closer than they actually are. The rearview camera display has a limited coverage, and the size and position of objects may appear different than they actually are. Make sure to check the surrounding area carefully.

494

2011 Odyssey10/07/17 10:40:47 31TK8600_500

Bluetooth HandsFreeLink (Models without navigation system)

HandsFreeLink (HFL)

Bluetooth allows you to place and receive phone calls using voice commands, without handling your cell phone.

Using HFL SelectorKnob

RETURN BUTTON

To use HFL, you need a Bluetooth- compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

In the U.S., visit com

or call (888) 528-7876.

handsfreelink.honda.

In Canada, visit or call (888) 528-7876.

www.handsfreelink.ca,

PHONE BUTTON

U.S. model is shown.

SELECTOR KNOB

Press the PHONE button or PICK- UP button to go to the Phone screen.

Use the selector knob to make menu or list selections.

To select an item on the screen, turn the selector knob left or right to highlight it, and then push the selector knob.

Press the RETURN button to go back to the previous screen.

CONTINUED

495

2011 Odyssey10/07/17 10:40:57 31TK8600_501

Bluetooth HandsFreeLink (Models without navigation system)

HFLButtons

VoiceControlTips

TALK BUTTON

PICK-UP BUTTON

MICROPHONE

Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted. To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

LanguageSelection You can change the system language to English, French, or Spanish (see page

317

).

BACK BUTTON

HANG-UP BUTTON

EX-L model is shown.

−

−

Press and

PICK-UP Button release to answer a call, or press to go directly to the Phone screen. HANG-UP Button Press and release to end or decline a call. TALK Button Press and release to call a number with a stored voice tag. BACK Button to cancel a command.

Press and release