lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.
See page steering wheel.
69
for how to adjust the
Main MenustTable of Contents03/07/17 08:46:39 31S5B620 0020
In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag. Being struck by an inflating side airbag can possibly result in serious injuries.
Sitting improperly or out of position can result in serious injury or death.
Always sit upright, well back in the seat, with your feet on the floor.
Advice for Pregnant Women
If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt, and keep the lap part of the belt as low as possible across the hips.
Protecting Adults and Teens
When driving, remember to sit upright and adjust the seat as far back as possible while allowing full control of the vehicle. When riding as a front passenger, adjust the seat as far back as possible.
This will reduce the risk of injuries to both you and your unborn child that can be caused by a crash or an inflating front airbag.
Each time you have a check-up, ask your doctor if it’s okay for you to drive.
Driver and Passenger Safety
17
Main MenustTable of Contents03/07/17 08:46:46 31S5B620 0021
Protecting Adults and Teens
Donotplacehardorsharpobjects betweenyourselfandafront Carrying hard or sharp airbag. objects on your lap, or driving with a pipe or other sharp objects in your mouth, can result in injuries if your front airbag inflates.
Donotattachorplaceobjectson Objects on thefrontairbagcovers. the covers marked ‘‘SRS AIRBAG’’ could interfere with the proper operation of the airbags or if be propelled inside the vehicle and hurt someone if the airbags inflate.
If a side airbag
Onmodelswithsideairbags,do notattachhardobjectsonornear afrontdoor. inflates, a cup holder or other hard object attached on or near the door could be propelled inside the vehicle and hurt someone.
Keepyourhandsandarmsaway If your fromtheairbagcovers. hands or arms are close to an airbag cover, they could be injured if the airbag inflates.
Additional Safety Precautions
Twopeopleshouldneverusethe sameseatbelt. could be very seriously injured in a crash.
If they do, they
Donotputanyaccessoriesonseat Devices intended to improve belts. occupant comfort or reposition the shoulder part of a seat belt can reduce the protective capability of the seat belt and increase the chance of serious injury in a crash.
18
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:46:58 31S5B620 0022
Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all five seating positions. The front seat belts are also equipped with automatic seat belt tensioners.
The seat belt system includes an indicator on the
instrument panel and a beeper to remind you and your passengers to fasten your seat belts.
If you turn the ignition switch to ON (II) before fastening your belt, the beeper sounds and the indicator flashes. If you do not fasten your seat belt before the beeper stops, the indicator stops flashing but remains on.
If you continue driving without fastening your seat belt, the beeper sounds and the indicator flashes again at regular intervals.
Additional Information About Your Seat Belts
Lap/Shoulder Belt The lap and shoulder belt goes over your shoulder, across your chest, and across your hips.
To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page for how to properly position the belt).
14
To unlock the belt, push the red PRESSbuttononthebuckle.Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.
All seat belts have an emergency locking retractor. In normal driving, the retractor lets you move freely in your seat while it keeps some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body.
The seat belts in all positions except the driver’s have an additional locking mechanism that must be activated to secure a child seat (see page 40).
If the shoulder part of the belt is pulled all the way out, the locking mechanism will activate. The belt will retract, but it will not allow the passenger to move freely.
CONTINUED
Driver and Passenger Safety
19
Main MenustTable of Contents03/07/17 08:47:08 31S5B620 0023
Additional Information About Your Seat Belts
To deactivate the locking mechanism, unlatch the buckle, and let the seat belt fully retract. To refasten the belt, pull it out only as far as needed.
Automatic Seat Belt Tensioners
For added protection, the front seat belts are equipped with automatic seat belt tensioners. When activated, the tensioners immediately tighten the belts to help hold the driver and a front passenger in place.
20
Driver and Passenger Safety
The tensioners are designed to activate primarily in frontal collisions, and they should activate in any collision severe enough to cause front-airbag inflation.
However, the tensioners can be activated during a collision where the front airbags do not deploy. In this case, the airbags would not be needed, but the additional restraint could be helpful.
When the tensioners are activated, the seat belts will remain tight until they are unbuckled in the normal manner.
Main MenustTable of Contents03/07/17 08:47:15 31S5B620 0024
Additional Information About Your Seat Belts
If a seat belt is worn during a crash, it must be replaced by the dealer. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced.
Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.
Check your seat belts regularly and have any problem corrected as soon as possible.
Seat Belt Maintenance For safety, you should check the condition of your seat belts regularly.
Pull each belt out fully and look for frays, cuts, burns, and wear. Check that the latches work smoothly and the belts retract easily. Any belt that is not in good condition or not working properly will not provide good protection and should be replaced as soon as possible.
Honda provides a lifetime warranty on seat belts for U.S. models. See your HondaWarrantyInformation booklet for details.
Driver and Passenger Safety
21
Main MenustTable of Contents03/07/17 08:47:27 31S5B620 0025
Additional Information About Your Airbags
Airbag System Components Your airbag system includes:
Two SRS (Supplemental Restraint System) front airbags. The driver’s airbag is stored in the center of the steering wheel; the front passenger’sairbagisstoredinthe dashboard. Both are marked ‘‘SRS AIRBAG.’’
Onmodelsequippedwithsideairbags,
one for the driver and one for a
front passenger. The airbags are
stored in the outer edges of the
seat-backs. Both are marked
‘‘SIDE AIRBAG’’ (see page
25
).
Automatic seat belt tensioners (see page
20
).
Sensors that can detect a moderate to severe frontal impact or side impact in models equipped with side airbags.
22
Driver and Passenger Safety
How Your Front Airbags Work
A sophisticated electronic system that continually monitors and records information about the sensors, the control unit, the airbag activators, and driver and frontpassengerseatbeltusewhen the ignition is in the ON (II) position.
An indicator on the instrument panel that alerts you to a possible problem with your airbags (see page
26
).
Onmodelsequippedwithsideairbags, an indicator on the dashboard that alerts you that the passenger’s side airbag has been turned off (see page
27
).
Emergency backup power in case your vehicle’s electrical system is disconnected in a crash.
If you ever have a moderate to severe frontal collision, sensors will detect the vehicle’s rapid deceleration. If the rate of deceleration is high enough, the control unit will instantly inflate the driver’s and front passenger’s front airbags, at the time and with the force needed.
Main MenustTable of Contents03/07/17 08:47:36 31S5B620 0026
Additional Information About Your Airbags
During a frontal crash, your seat belt restrains your lower body and torso, and the airbag helps protect your head and chest.
Although both airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy.
This can happen if the severity of a collision is at the margin, or threshold, that determines whether or not the airbags will deploy. In such cases, the seat belt will provide sufficient protection, and the supplemental protection offered by the airbag would be minimal.
After inflating, the front airbags immediately deflate, so they won’t interfere with the driver’s visibility, or the ability to steer or operate other controls.
The total time for inflation and deflation is one-tenth of a second, so fast that most occupants are not aware that the airbags deployed until they see them lying in their laps.
After a crash, you may see what looks like smoke. This is actually powder from the airbag’s surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so.
CONTINUED
Driver and Passenger Safety
23
Main MenustTable of Contents03/07/17 08:47:47 31S5B620 0027
Additional Information About Your Airbags
Dual-StageAirbags Your front airbags are dual-stage airbags. This means they have two inflation stages that can be ignited sequentially or simultaneously, depending on crash severity.
moresevere
In a crash, both stages will ignite simultaneously to provide the quickest and greatest protection.
lesssevere
crash, one stage will
In a ignite first, then the second stage will ignite a split second later. This provides longer airbag inflation time with a little less force.
Dual-ThresholdAirbags Your front airbags are also dual- threshold airbags. Airbags with this feature have two deployment thresholds that depend on whether or not the occupant is wearing a seat belt.
notlatched
If the occupant’s belt is the airbag will deploy at the same threshold as a conventional airbag, because the occupant would need extra protection.
islatched
If the occupant’s belt , the airbag will inflate at a slightly higher threshold, when the airbag would be needed to supplement the protection provided by the seat belt.
24
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:47:57 31S5B620 0028
Additional Information About Your Airbags
How Your Side Airbags Work (On models equipped)
If you ever have a moderate to severe side impact, the sensors will detect rapid deceleration and signal the control unit to instantly inflate either the driver’s or the passenger’s side airbag. Only one airbag will deploy during a side impact. If the impact is on the passenger’s side, the passenger’s side airbag will deploy even if there is no passenger.
To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats.
The passenger’s side airbag has a
cutoff system designed to turn off
the passenger’s front airbag if a
child’s head is in the airbag’s
deployment path (see page
27
).
If the side airbag off indicator comes on, have the passenger sit upright. Once the passenger is out of the deployment path of the side airbag, the system will turn the airbag back on and the indicator will go out.
A front seat passenger should not use a cushion or other object as a backrest. It may prevent the cutoff system from working properly.
Driver and Passenger Safety
25
Main MenustTable of Contents03/07/17 08:48:08 31S5B620 0029
Additional Information About Your Airbags
If the indicator comes on at any other time, or does not come on at all, you should have the system checked by your dealer. For example:
If the SRS indicator does not come on after you turn the ignition switch to ON (II).
If the indicator stays on after the engine starts.
If the indicator comes on or flashesonandoffwhileyoudrive.
If you see any of these indications, the airbags and seat belt tensioners may not work properly when you need them.
Ignoring the SRS indicator light can result in serious injury or death if the airbag systems, or tensioners do not work properly.
Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.
How the SRS Indicator Works The SRS indicator alerts you to a potential problem
with your front airbags, see side airbags, or front seat belt tensioners (see page
53
).
When you turn the ignition to ON (II), this indicator will light briefly then go out. This tells you that the system is working properly.
26
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:48:17 31S5B620 0030
Additional Information About Your Airbags
How the Side Airbag Off Indicator Works (Onmodelsequipped)
This indicator alerts you that the passenger’s side airbag has been automatically shut off. It does mean there is a problem with your side airbags.
not
To reduce the risk of injury from an inflating side airbag, your vehicle has an automatic cutoff system for the passenger’s side airbag.
Although Honda does not encourage children to ride in front, this system is designed to shut off the side airbag if a child leans sideways and the child’s head is in the side airbag deployment path.
If a short adult leans sideways, or a larger adult slouches and leans sideways into the side airbag deployment path, the system may also shut off the side airbag.
To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats.
When you turn the ignition switch to ON (II), the indicator should light briefly and go out. If it doesn’t light, stays on, or comes on while driving without a passenger in the front seat, have the system checked.
Driver and Passenger Safety
27
Main MenustTable of Contents03/07/17 08:48:27 31S5B620 0031
Additional Information About Your Airbags
Improperly
Donotcoverorreplacefrontseat- backcoverswithoutconsultinga Hondadealer. replacing or covering front seat- back covers can prevent your side airbags from inflating during a side impact.
Additional Safety Precautions
Donotattempttodeactivateyour airbags. seat belts provide the best protection.
Together, airbags and
Donottamperwithairbag componentsorwiringforany Tampering could cause reason. the airbags to deploy, possibly causing very serious injury.
Donotexposethefrontseat-backs If water or another liquid toliquid. soaks into a seat-back, it can prevent the side airbag cutoff system from working properly.
Airbag Service Your airbag systems are virtually maintenance-free, and there are no parts you can safely service. However, you must have your vehicle serviced if:
Any airbag
Anairbageverinflates. that has deployed must be replaced along with the control unit and other related parts. If a front airbag inflates the seat belt tensioners must also be replaced. Do not try to remove or replace any airbag by yourself. This must be done by a Honda dealer or a knowledgeable body shop.
TheSRSindicatoralertsyoutoa Take your vehicle to an problem. authorized Honda dealer as soon as possible. If you ignore this indication, your airbags may not operate properly.
28
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:48:35 31S5B620 0032
Protecting Children General Guidelines
−
Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.
Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt and use a booster if necessary.
Children depend on adults to protect them. However, despite their best intentions many adults do not know how to properly protect child passengers.
If you have children, or if you ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children, and larger children.
All Children Must Be Restrained Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of death of children ages 12 and under.
To reduce the number of child deaths and injuries, every state and Canadian province requires that infants and children be properly restrained when they ride in a vehicle.
CONTINUED
Driver and Passenger Safety
29
Main MenustTable of Contents03/07/17 08:48:49 31S5B620 0033
Protecting Children General Guidelines
−
Infantsandsmallchildrenmustbe restrainedinanapprovedchildseat thatisproperlysecuredtothe vehicle
(see pages
34
35
).
−
Largerchildrenmustberestrained withalap/shoulderbeltandrideon aboosteruntiltheseatbeltfitsthem properly
(see pages
42
45
).
−
All Children Should Sit in the Back Seat According to accident statistics, children of all ages and sizes are safer when they are restrained in the back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in the back seat.
30
Driver and Passenger Safety
Children who ride in back are less likely to be injured by striking interior vehicle parts during a collision or hard braking. Also, children cannot be injured by an inflating airbag when they ride in the back.
The Passenger’s Front Airbag Can Pose Serious Risks Front airbags have been designed to help protect adults in a moderate to severe frontal collision. To do this the passenger’s front airbag is quite large and it can inflate with enough force to cause very serious injuries.
Infants Neverputarear-facingchildseatin thefrontseatofavehicleequipped If withapassenger’sfrontairbag. the airbag inflates, it can hit the back of the child seat with enough force to kill or very seriously injure an infant.
Small Children Placingaforward-facingchildseatin thefrontseatofavehicleequipped withpassenger’sfrontairbagcanbe hazardous. far forward, or the child’s head is thrown forward during a collision, an inflating front airbag can strike the child with enough force to kill or very seriously injure a small child.
If the vehicle seat is too
Whenever possible,
Larger Children Childrenwhohaveoutgrownchild seatsarealsoatriskofbeinginjured orkilledbyaninflatingpassenger’s frontairbag. larger children should sit in the back seat, in a booster seat if needed, and be properly restrained with a seat belt (see page information about protecting larger children).
for important
42
Main MenustTable of Contents03/07/17 08:49:07 31S5B620 0034
Protecting Children General Guidelines
−
U.S.Models To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in the back seat, your vehicle has warning labels on the dashboard and on the driver’s and front passenger’s visors. Please read and follow the instructions on these labels.
CanadianModels To remind you of the front airbag hazards, your vehicle has warning labels on the driver’s and front passenger’s visors. Please read and follow the instructions on these labels.
Driver and Passenger Safety
31
Main MenustTable of Contents03/07/17 08:49:17 31S5B620 0035
Protecting Children General Guidelines
−
If a Child Requires Close Attention Many parents say they prefer to put an infant or small child in the front passenger seat so they can watch the child, or because the child requires attention.
Placing a child in the front seat exposes the child to hazards in a frontal collision, and paying close attention to a child distracts the driver from the important tasks of driving, placing both of you at risk.
If a child requires physical attention or frequent visual contact, we strongly recommend that another adult ride with the child in the back seat. The back seat is far safer for a child than the front.
If You Must Drive with Several Children Your vehicle has three seating positions in the back seat where children can be properly restrained. If you ever have to carry four children, and a child must ride in front:
Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page
42
).
Move the vehicle seat as far to the rear as possible (see page
11
).
Have the child sit upright and well back in the seat (see page
30
).
Make sure the seat belt is properly
positioned and secured (see page
14
).
32
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:49:28 31S5B620 0036
Additional Safety Precautions
Neverholdaninfantorchildon your lap. If you are not wearing a seat belt in crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt the child can be torn from your arms and be seriously hurt or killed.
Never put a seat belt over yourself and a child. During a crash, the belt could press deep into the child and cause serious or fatal injuries.
Never let two children use the same seat belt. If they do, they could be very seriously injured in a crash.
Use childproof door locks to prevent children from opening the doors. This can prevent children from accidentally falling out.
Protecting Children General Guidelines
−
Do not leave children alone in a vehicle. Leaving children without adult supervision is illegal in most states and Canadian provinces, and can be very hazardous. For example, infants and small childrenleftinavehicleonahot day can die from heatstroke. A child left alone with the key in the ignition can accidentally set the vehicle in motion, possibly injuring themselves or others.
Keep vehicle keys and remote transmitters out of the reach of children. Even very young children learn how to unlock vehicle doors, turn on the ignition, and open the trunk, which can lead to accidental injury or death.
Lock all doors and trunk when your vehicle is not in use. Children who play in vehicles can accidentally get trapped inside the trunk. Teach your children not to play in or around vehicles. Know how to operate the emergency trunk opener and decide if your children should be shown how to use this feature (see page
74
).
Driver and Passenger Safety
33
Main MenustTable of Contents03/07/17 08:49:41 31S5B620 0037
Protecting Infants and Small Children
Protecting Infants ChildSeatType
Only a rear-facing child seat provides proper support for a baby’s head, neck, and back.
An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat and the child is at least one year old.
34
Driver and Passenger Safety
Placing a rear-facing child seat in the front seat can result in serious injury or death if the passenger’s front airbag inflates.
Always place a rear-facing child seat in the back seat, not the front.
Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rear- facing, reclining mode.
Donotputarear-facingchildseatin If placed aforward-facingposition. facing forward, an infant could be very seriously injured during a frontal collision.
ChildSeatPlacement In this vehicle, a rear-facing child seat can be placed in any seating position in the back seat, but not in the front. Never put a rear-facing child seat in the front seat. If the passenger’s front airbag inflates, it can hit the back of the child seat with enough force to kill or seriously injure an infant.
When properly installed, a rear- facing child seat may prevent the driver or a front passenger from moving the seat as far back as recommended, or from locking the seat-back in the desired position. In either of these situations, we strongly recommend that you install the child seat directly behind the front passenger seat, move the front seat as far forward as needed, and leave it unoccupied. Or you may wish to get a smaller child seat that allows you to safely carry a front passenger.
Main MenustTable of Contents03/07/17 08:49:51 31S5B620 0038
Protecting Infants and Small Children
We also recommend that a small child stay in the child seat as long as possible, until the child reaches the weight or height limit for the seat.
ChildSeatPlacement We strongly recommend placing a forward-facing child seat in a back seat, not the front.
If the vehicle seat is too
Placingaforward-facingchildseatin thefrontseatofavehicleequipped withapassenger’sairbagcanbe hazardous. far forward, or the child’s head is thrown forward during a collision, an inflating airbag can strike the child with enough force to cause very serious or fatal injuries.
If it is necessary to put a forward- facing child seat in the front, move the vehicle seat as far to the rear as possible, be sure the child seat is firmly secured to the vehicle, and the child is properly strapped in the seat.
Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.
If you must place a forward- facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.
Protecting Small Children ChildSeatType
A child who is at least one year old, and who fits within the child seat maker’s weight and height limits, should be restrained in a forward- facing, upright child seat.
Of the different seats available, we recommend those that have a five- point harness system as shown.
Driver and Passenger Safety
35
Main MenustTable of Contents03/07/17 08:50:01 31S5B620 0039
Selecting a Child Seat
When buying a child seat, you need to choose between a conventional child seat, or one designed for use with the Lower Anchors and Tethers for Children (LATCH) system.
Conventional child seats must be secured to a vehicle with a seat belt, whereas LATCH-compatible seats are secured by attaching the seat to hardware built into the two outer rear seats.
Since LATCH-compatible child seats are easier to install and reduce the possibility of improper installation, we recommend selecting this style.
We also recommend selecting a LATCH-compatible seat with a rigid, rather than a flexible, anchor (see page
39
).
36
Driver and Passenger Safety
Before purchasing a conventional child seat, or using a previously purchased one, we recommend that you test the seat in the specific vehicle seating position, or positions, where the seat will be used.
In seating positions and vehicles not equipped with LATCH, a LATCH- compatible child seat can be installed using a seat belt.
Whatever type of seat you choose, to provide proper protection, a child seat should meet three requirements:
1.
ThechildseatshouldmeetU.S.or CanadianMotorVehicleSafety Look for FMVSS Standard213. 213 or CMVSS 213 on the box.
2.
Thechildseatshouldbeofthe propertypeandsizetofitthechild. Rear-facing for infants, forward- facing for small children.
3.
Thechildseatshouldfitthe vehicleseatingposition(or positions)whereitwillbeused.
Main MenustTable of Contents03/07/17 08:50:10 31S5B620 0040
After selecting a proper child seat, and a good place to install the seat, there are three main steps in installing the seat:
1.
Properlysecurethechildseatto All child seats must be thevehicle. secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for Children) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash.
2.
After installing a child
Makesurethechildseatisfirmly secured. seat, push and pull the seat forward and from side to side to verify that it is secure.
Installing a Child Seat
The following pages provide guidelines on how to properly install a child seat. A forward-facing child seat is used in all examples, but the instructions are the same for a rear- facing child seat.
A child seat secured with a seat belt should be installed as firmly as possible. However, it does not need to be ‘‘rock solid’’. Some side-to-side movement can be expected and should not reduce the child seat’s effectiveness.
If the child seat is not secure, try installing it in a different seating position, or use a different style of child seat that can be firmly secured.
3.
Securethechildinthechildseat. Make sure the child is properly strapped in the child seat according to the child seat maker’s instructions. A child who is not properly secured in a child seat can be seriously injured in a crash.
Driver and Passenger Safety
37
Main MenustTable of Contents03/07/17 08:50:18 31S5B620 0041
Installing a Child Seat
Installing a Child Seat Using LATCH Your vehicle is equipped with LATCH (Lower Anchors and Tethers for Children) at the outer rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH.
MARKS
LOWER ANCHORS
Small marks are positioned to indicate the locations of each anchor point.
38
Driver and Passenger Safety
To install a LATCH-compatible child seat: 1.
Move the seat belt buckle or tongue away from the lower anchors. Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and anchors.
2.
Main MenustTable of Contents03/07/17 08:50:30 31S5B620 0042
Installing a Child Seat
TETHER STRAP HOOK
Front
ANCHORAGE POINT
6.
Attach the tether strap hook to the tether anchor, then tighten the strap as instructed by the child seat maker.
7.
Push and pull the child seat forward and from side-to-side to verify that it is secure.
Driver and Passenger Safety
39
Rigid type
3.
Place the child seat on the vehicle seat, and attach the seat to the lower anchors according to the child seat maker’s instructions.
Some LATCH-compatible seats have a rigid-type connection as shown above.
Flexible type Other LATCH-compatible seats have a flexible-type connection as shown above.
4.
5.
Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit.
Lift the rear head restraint, then route the tether strap over the seat-back between the legs of the head restraint, making sure the strap is not twisted.
Main MenustTable of Contents03/07/17 08:50:40 31S5B620 0043
Installing a Child Seat
Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt.
In addition, the lap/shoulder belts in the back seating positions, and in the front passenger seat, have a locking mechanism that must be activated to secure a child seat.
1.
With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle.
2.
3.
To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor.
After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked and you will need to repeat these steps.
40
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:50:51 31S5B620 0044
Installing a Child Seat
Installing a Child Seat with a Tether
COVER
ANCHORAGE POINT
A child seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points shown above.
Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. (Tethers are required in Canada.)
Driver and Passenger Safety
41
4.
After confirming that the belt is locked, then grab the shoulder part of the belt near the buckle and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt.
5.
Push and pull the child seat forward and from side to side to verify that it is firmly secured. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.
To deactivate the locking mechanism and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.
Main MenustTable of Contents03/07/17 08:51:06 31S5B620 0045
Installing a Child Seat, Protecting Larger Children
Using an Outer Anchorage Point
TETHER STRAP HOOK
Front
Using the Center Anchorage Point
TETHER STRAP HOOK
Front
ANCHORAGE POINT
1.
2.
3.
34
), lift the head restraint, then
After securing the child seat in the
desired position (see pages
and
35
route the tether strap over the top
of the seat-back and through the
head restraint legs.
Lift the anchor point lid, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
42
Driver and Passenger Safety
ANCHORAGE POINT
1.
2.
After properly securing the child seat with the lap/shoulder belt (see page ), route the tether strap over the top of the seat-back.
40
Attach the tether strap hook to the anchor, making sure the strap is not twisted, then tighten the strap according to the seat-maker’s instructions.
Protecting Larger Children When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster and wear a lap/shoulder belt. The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must sit in front.
Allowing a large child age 12 or under to sit in front can result in injury or death if the passenger’s front airbag inflates.
If a large child must ride in front, move the vehicle seat as far back as possible, use a booster seat if needed, have the child sit up properly and wear the seat belt properly.
Main MenustTable of Contents03/07/17 08:51:20 31S5B620 0046
3.
Does the shoulder belt cross between the child’s neck and arm?
4.
Is the lap part of the belt as low as possible, touching the child’s thighs?
5.
Will the child be able to stay seated like this for the whole trip?
If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.
Checking Seat Belt Fit
To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself:
1.
Does the child sit all the way back against the seat?
2.
Do the child’s knees bend comfortably over the edge of the seat?
Protecting Larger Children
Using a Booster Seat
A child who has outgrown a forward- facing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster.
CONTINUED
Driver and Passenger Safety
43
Main MenustTable of Contents03/07/17 08:51:28 31S5B620 0047
Protecting Larger Children
Some states also require children to use a booster until they reach a given age or weight (e.g., 6 years or 60 lbs). Be sure to check current laws in the state or states where you intend to drive.
Booster seats can be high-back or low-back. Whichever style you select, make sure the booster meets federal safety standards and that you follow the booster seat maker’s instructions.
If a child who uses a booster must be in front, move the vehicle seat as far back as possible and be sure the child is wearing the seat belt properly.
44
Driver and Passenger Safety
A child may continue using a booster seat until the tops of their ears are even with the top of the vehicle’s or booster’s seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster.
WhenCanaLargerChildSitinFront The National Highway Traffic Safety Administration and Transport Canada recommend that all children ages 12 and under be properly restrained in the back seat.
If the passenger’s front airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position.
The side airbag also poses risks. If any part of a larger child’s body is in the path of a deploying side airbag, the child could receive possibly serious injuries.
Main MenustTable of Contents03/07/17 08:51:46 31S5B620 0048
Of course, children vary widely. And while age may be one indicator of when a child can safely ride in the front. There are other important factors you should consider.
Maturity To safely ride in front, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout a ride.
PhysicalSize Physically, a child must be large enough for the lap/shoulder belt to properly fit (see page belt does not fit properly, with or without the child sitting on a booster, the child should not sit in the front.
). If the seat
43
If you decide that a child can safely ride up front, be sure to:
Carefully read the owner’s manual and make sure you understand all seat belt instructions and all safety information.
Move the vehicle seat to the rear- most position.
Have the child sit up straight, back against the seat, and feet on or near the floor.
Check that the child’s seat belt is properly positioned and secured.
Supervise the child. Even mature children sometimes need to be reminded to fasten the seat belts or sit properly.
Protecting Larger Children
Additional Safety Precautions Donotletachildwearaseatbelt This could result in acrosstheneck. serious neck injuries during a crash.
Donotletachildputtheshoulder partofaseatbeltbehindthebackor underthearm. very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.
This could cause
Twochildrenshouldneverusethe If they do, they could sameseatbelt. be very seriously injured in a crash.
Donotputanyaccessoriesonaseat Devices intended to improve a belt. child’s comfort or reposition the shoulder part of a seat belt can make the belt less effective, and increase the chance of serious injury in a crash.
Driver and Passenger Safety
45
Main MenustTable of Contents03/07/17 08:51:54 31S5B620 0049
Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you.
Avoid any enclosed areas or activities that expose you to carbon monoxide.
High levels of carbon monoxide can collect rapidly in enclosed areas, such as a garage. Do not run the engine with the garage door closed. Even with the door open, run the engine only long enough to move the vehicle out of the garage.
With the trunk lid open, air flow can pull exhaust gas into your vehicle’s interior and create a hazardous condition. If you must drive with the trunk lid open, open all the windows and set the heating and cooling system as shown below.
If you must sit in your parked vehicle, even in an unconfined area, with the engine running, adjust the heating and cooling system as follows:
1. 2. 3. 4.
Select the Fresh Air mode. Select the Turn the fan on high speed. Set the temperature control to a comfortable setting.
mode.
Carbon Monoxide Hazard
Your vehicle’s exhaust contains carbon monoxide gas. You should have no problem with carbon monoxide entering the vehicle in normal driving if you maintain your vehicle properly. Have the exhaust system inspected for leaks whenever:
The vehicle is raised for an oil change. You notice a change in the sound of the exhaust. The vehicle was in an accident that may have damaged the under- side.
46
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:52:12 31S5B620 0050
Safety Labels
These labels are in the locations shown. They warn you of potential hazards that could cause serious injury. Read these labels carefully. If a label comes off or becomes hard to read, contact your Honda dealer for a replacement.
DASHBOARD U.S.modelsonly
SUN VISOR U.S.models
Canadianmodels
RADIATOR CAP
CONTINUED
Driver and Passenger Safety
47
Main MenustTable of Contents03/07/17 08:52:22 31S5B620 0051
Safety Labels
HOOD Onmodelswithoutsideairbags
Onmodelswithsideairbags
48
Driver and Passenger Safety
Main MenustTable of Contents03/07/17 08:52:27 31S5B620 0052
Instruments and Controls
This section gives information about the controls and displays that contribute to the daily operation of your Honda. All the essential controls are within easy reach.
Control Locations Instrument Panel Gauges
........................... ............................ ............................................. ..................................... ................................... ................. ................................
Odometer Trip Meter Current Fuel Mileage Trip Mileage Turning Off the Mileage
. 50
. 51
. 59
. 60
. 60
. 60
. 60
Display
Fuel Gauge IMA Battery Level Gauge Charge/Assist Gauge Temperature Gauge
..................................... .................................. ......... ................ ...................
. 61
. 61
. 62
. 63
. 63
Controls Near the Steering
Wheel
...........................................
. 64
Windshield Wipers and Washers . 65
. 66
Turn Signal and Headlights
...........
. 67
Instrument Panel Brightness
........
. 67
Hazard Warning Button
.................
.................
Rear Window Defogger
. 68
. 69
Steering Wheel Adjustment
..........
. 70
Keys and Locks
...............................
. 71
Immobilizer System
........................
................................
Ignition Switch
. 72
Door Locks
Door Locks Power Door Locks Childproof Door Locks Trunk Emergency Trunk Opener
...................................... .................................. ...................... .............. ........................................... ........ ....................... ................................................. .............................. ............................................. ................................. ................................. ........... ....................... .......... .................................... ...............
Remote Transmitter Seats Power Windows Mirrors Parking Brake Interior Lights Interior Convenience Items
Beverage Holders Accessory Power Sockets Glove Box Console Compartment
. 73
. 73
. 73
. 73
. 74
. 74
. 75
. 77
. 79
. 81
. 82
. 83
. 84
. 85
. 85
. 85
. 85
Instruments and Controls
49
Main Menust03/07/17 08:52:34 31S5B620 0053
Control Locations
POWER DOOR LOCK SWITCH (P. 73)
CRUISE CONTROL MASTER SWITCH (P. 109)
POWER WINDOW SWITCHES (P. 79)
MIRROR CONTROLS (P. 81)
HEATING/COOLING CONTROLS (P. 88)
AUDIO SYSTEM (P. 94) DIGITAL CLOCK (P. 108)
ACCESSORY POWER SOCKET (P. 85)
FUEL FILL DOOR RELEASE (P. 115) TRUNK RELEASE (P. 74)
HOOD RELEASE HANDLE (P. 117)
CRUISE CONTROL SWITCHES (P. 109)
AT model is shown.
50
Instruments and Controls
Main MenustTable of Contents03/07/17 08:52:42 31S5B620 0054
Automatic Transmission(CVT)
HIGH BEAM INDICATOR (P. 56)
CRUISE CONTROL INDICATOR (P. 56)
SEAT BELT INDICATOR (P. 53) SIDE AIRBAG OFF INDICATOR (P. 53)
SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR (P. 53)
CHARGING SYSTEM INDICATOR (P. 54, 191)
AUTO IDLE STOP INDICATOR (P. 137) IMMOBILIZER SYSTEM INDICATOR (P. 55)
MALFUNCTION INDICATOR LAMP (P. 192)
Instrument Panel
PARKING BRAKE AND BRAKE SYSTEM INDICATOR * (P. 54)
MAINTENANCE REQUIRED INDICATOR (P. 58)
ANTI-LOCK BRAKE SYSTEM INDICATOR (P. 54)
LOW FUEL INDICATOR (P. 56)
IMA SYSTEM INDICATOR (P. 55)
SHIFT LEVER POSITION INDICATOR (P. 133)
TRUNK-OPEN INDICATOR (P. 56)
LOW OIL PRESSURE INDICATOR (P. 54, 190)
ELECTRIC POWER STEERING(EPS) INDICATOR (P. 55)
*The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.
Instruments and Controls
51
Main MenustTable of Contents03/07/17 08:52:49 31S5B620 0055
Instrument Panel
Manual Transmission
HIGH BEAM INDICATOR (P. 56)
CRUISE CONTROL INDICATOR (P. 56)
SEAT BELT INDICATOR (P. 53) SIDE AIRBAG OFF INDICATOR (P. 53)
SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR (P. 53)
CHARGING SYSTEM INDICATOR (P. 54, 191)
AUTO IDLE STOP INDICATOR (P. 132) IMMOBILIZER SYSTEM INDICATOR (P. 55)
MALFUNCTION INDICATOR LAMP (P. 192)
PARKING BRAKE AND BRAKE SYSTEM INDICATOR (P. 54)
MAINTENANCE REQUIRED INDICATOR (P. 58)
ANTI-LOCK BRAKE SYSTEM INDICATOR (P. 54)
LOW FUEL INDICATOR (P. 56)
IMA SYSTEM INDICATOR (P. 55)
SHIFT UP/SHIFT DOWN INDICATORS (P. 132)
TRUNK-OPEN INDICATOR (P. 56)
LOW OIL PRESSURE INDICATOR ELECTRIC POWER STEERING(EPS) (P. 54, 190)
INDICATOR (P. 55)
52
Instruments and Controls
Main MenustTable of Contents03/07/17 08:53:03 31S5B620 0056
Supplemental Restraint System Indicator
This indicator comes on when you
turn the ignition switch to ON (II). If
it comes on at any other time, it
indicates a potential problem with
your front airbags. This indicator will
also alert you to a potential problem
with your side airbags, passenger’s
side airbag automatic cutoff system,
or automatic seat belt tensioners.
For more information, see page
26
The instrument panel has many indicators to give you important information about your vehicle.
Seat Belt Indicator
The seat belt system includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts.
If you turn the ignition switch to ON (II) before fastening your belt, the beeper sounds and the indicator flashes. If you do not fasten your seat belt before the beeper stops, the indicator stops flashing but remains on.
If you continue driving without fastening your seat belt, the beeper sounds and the indicator flashes again at regular intervals.
Instrument Panel
Side Airbag Off Indicator
Only on models equipped with side airbags This indicator comes on when you turn the ignition switch to ON (II). If it comes on at any other time, it indicates that the passenger’s side airbag has automatically shut off. For more information, see page
27
Instruments and Controls
53
Main MenustTable of Contents03/07/17 08:53:16 31S5B620 0057
Instrument Panel
U.S.
Canada
Parking Brake and Brake System Indicator
This indicator has two functions:
1.
2.
Itcomesonwhenyouturnthe ignition switch to ON (II). It is a reminder to check the parking brake. Driving with the parking brake not fully released can damage the brakes and tires.
If it remains lit after you have fully released the parking brake while the engine is running, or if it comes on while driving, there could be a problem with the brake system. For complete information, see page
193
Anti-lock Brake System (ABS) Indicator
Ifequipped This indicator normally comes on for a few seconds when you turn the ignition switch to ON (II), and when the ignition switch is turned to START (III). If it comes on at any other time, there is a problem in the ABS. If this happens, have your vehicle checked at a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock. For complete information, see page
141
Charging System Indicator
If this indicator comes on when the engine is running, the 12 volt battery is not being charged. For complete information, see page
191
Low Oil Pressure Indicator
The engine can be severely damaged if this indicator flashes or stays on when the engine is running. For complete information, see page
190
Malfunction Indicator
Lamp
192
See page
54
Instruments and Controls
Main MenustTable of Contents03/07/17 08:53:27 31S5B620 0058
Electric Power Steering (EPS) Indicator
This indicator normally comes on when you turn the ignition to ON (II) and goes off after the engine starts. If it comes on at any other time, there is a problem in the Electric Power Steering system. If this happens, stop the vehicle in a safe place and turn off the engine. Reset the system by restarting the engine. The indicator will not turn off immediately. If it does not go off after driving a short distance, or comes back on again while driving, take the vehicle to your dealer to have it checked. With the indicator on, the EPS may be turned off, making the vehicle harder to steer.
If the power steering system overheats while driving, the assisting power is reduced and steering may feel slightly harder.
If you drive with the system overheated continuously or repeatedly, this can damage the power steering system.
Immobilizer System Indicator
This indicator comes on for a few seconds when you turn the ignition switch to ON (II). It will then go off if you have inserted a properly-coded ignition key. If it is not a properly- coded key, the indicator will blink and the engine will not start (see page
71
).
Instrument Panel
IMA System Indicator
This indicator normally comes on for a few seconds when you turn the ignition switch to ON (II). If it comes on at any other time, it indicates a problem in the Integrated Motor Assist (IMA) system. With the IMA indicator on, the vehicle may not accelerate as it normally does. Have the vehicle checked by the dealer as soon as possible.
Auto Idle Stop Indicator See pages
and
132
137