You may also be interested in...
Download PDF Manual

tion if you need to leave the car for any reason. Press on the brake pedal when you are moving the shift lever from Neutral to another gear.



Drive (D ) Use this position for your normal driving. The transmis- sion automatically selects a suitable gear for your speed and acceleration. You may notice the transmission shifting up at higher speeds when the engine is cold. This helps the engine warm up faster.



This position is similar


Drive (D ) to D , except only the first three gears are selected. Use D when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill. D can also keep the transmission from cycling between third and fourth gears in stop-and-go driving.


For faster acceleration when in D or D , you can get the transmission to automatically downshift by pushing the accelerator pedal to the floor. The transmission will shift down one or two gears, depending on your speed.


Automatic Transmission



Second (2) To shift to Second, press the release button on the side of the shift lever. This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop. Second gives you more power when climbing, and increased engine braking when going down steep hills. Use second gear when starting out on a slippery surface or in deep snow. It will help reduce wheelspin.


CONTINUED


Driving


213


Main MenuTable of Contentsst 01/06/13 19:02:25 31S82640_217


Automatic Transmission


First (1) − To shift from Second to First, press the release button on the side of the shift lever. With the lever in this position, the transmission locks in First gear. By upshifting and downshifting through 1, 2, D , and D , you can operate this transmission much like a manual transmission without a clutch pedal.


Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the RPM below the red zone.


Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work.


1.


Set the Parking brake.


2.


Remove the key from the ignition switch.


214


Driving


Main MenuTable of Contentsst 01/06/13 19:02:33 31S82640_218


Automatic Transmission


If you need to use the Shift Lock Release, it means your car is developing a problem. Have the car checked by your Honda dealer.


Driving 215


3.


Put a cloth on the edge of the Shift Lock Release slot cover next to the shift lever. Use a small flat-tipped screwdriver or small metal plate (neither are included in the tool kit) to remove the cover. Carefully pry off the edge of the cover.


4.


Insert the key in the Shift Lock Release slot.


5.


6.


Push down on the key while you press the release button on the shift lever and move the shift lever out of Park to Neutral.


Remove the key from the Shift Lock Release slot, then reinstall the cover. Make sure the notch on the cover is on the left side. Depress the brake pedal and restart the engine.


Main MenuTable of Contentsst 01/06/13 19:02:45 31S82640_219


Parking


Always use the parking brake when you park your car. The indicator on the instrument panel shows that the parking brake is not fully released; it does not indicate that the parking brake is firmly set. Make sure the parking brake is set firmly or your car may roll if it is parked on an incline.


If your car has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the car from moving and putting pressure on the parking mechanism in the transmission making it easier to move the shift lever out of Park when you want to drive away.



216


Driving


If the car is facing uphill, turn the front wheels away from the curb. If you have a manual transmission, put it in first gear.


If the car is facing downhill, turn the front wheels toward the curb. If you have a manual transmission, put it in reverse gear.


Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.


Parking Tips


Make sure the moonroof and the windows are closed.


Turn off the lights.


Place any packages, valuables, etc., in the trunk or take them with you.


Lock the doors.


OnSpecialEdition,EX,andEX-V6
models Lock the doors with the key or the remote transmitter. Check the indicator on the driver’s door to verify that the security system is set.


Never park over dry leaves, tall grass, or other flammable materials. The three way catalytic converter gets very hot, and could cause these materials to catch on fire.


Main MenuTable of Contentsst 01/06/13 19:02:54 31S82640_220


Your Honda is equipped with front disc brakes. The brakes on the rear wheels may be disc or drum, depending on the model. A power assist helps reduce the effort needed on the brake pedal. The ABS (on cars equipped with ABS) helps you retain steering control when braking very hard.


Put your foot on the brake pedal only when you intend to brake. Resting your foot on the pedal keeps the brakes applied lightly, causing them to build up heat. Heat build-up can reduce how well your brakes work. It also keeps your brake lights on all the time, confusing drivers behind you.


Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by downshifting to a lower gear and taking your foot off the accelerator pedal.


Check your brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Since a longer distance is needed to stop with wet brakes, be extra cautious and alert in your driving.


The Braking System


Brake Wear Indicators The front disc brakes on all models have audible brake wear indicators. They are also on the rear brakes of cars equipped with ABS as standard equipment. When the brake pads need replacing, you will hear a distinctive metallic ‘‘screeching’’ sound when you apply the brakes. If you do not have the brake pads replaced, they will begin screeching all the time.


Your brakes may sometimes squeal or squeak when you apply them lightly. Do not confuse this with the brake wear indicators. They make a very audible ‘‘screeching.’’


Driving 217


Main MenuTable of Contentsst 01/06/13 19:03:04 31S82640_221


The Braking System


Brake System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.


FFrroonntt


218


Driving


Anti-lock Brakes The EX, and EX-V6 models, the U.S. LX-V6, and the Canadian Special Edition models have an Anti-lock Brake System (ABS) as standard equipment.


ABS helps to prevent the wheels from locking up and skidding during hard braking, allowing you to retain steering control.


When the front tires skid, you lose steering control; the car continues straight ahead even though you turn the steering wheel. The ABS helps to prevent lock-up and helps you retain steering control by pumping the brakes rapidly; much faster than a person can do it.


You should never pump the brake pedal, this defeats the purpose of the ABS. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal as you steer away from the hazard. This is sometimes referred to as ‘‘stompandsteer.’’


You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise. This is normal, it is the ABS rapidly pumping the brakes.


Activation varies with the amount of traction your tires have. On dry pavement, you will need to press on the brake pedal very hard before you activate the ABS. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.


Main MenuTable of Contentsst 01/06/13 19:03:13 31S82640_222


ImportantSafetyReminders ABS does not reduce the time or distance it takes to stop the car, only helps with steering control during braking. You should always maintain a safe following distance from other vehicles.


it


A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti- lock. Slow down and allow a greater distance between vehicles under those conditions.


ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe, prudent speed for the road and weather conditions.


ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your car to veer into oncoming traffic or off the road.


The Braking System


ABSIndicator


AABBSS IINNDDIICCAATTOORR


**


**


UU..SS.. iinnddiiccaattoorr sshhoowwnn


59


The ABS is self-checking. If anything goes wrong, the ABS indicator on the instrument panel comes on (see page ). This means the anti-lock function of the braking system has shut down. The brakes still work like a conventional system without anti- lock, providing normal stopping ability. You should have the dealer inspect your car as soon as possible.


CONTINUED


Driving 219


Main MenuTable of Contentsst 01/06/13 19:03:21 31S82640_223


The Braking System, Traction Control System


OnallV6models The TCS indicator will come on along with the ABS indicator if there is a problem with the anti-lock brake system.


Traction Control System OnallV6models Your Honda is equipped with a Traction Control System (TCS) to assist you in maintaining traction while driving slowly on loose or slippery surfaces. The TCS assists only in low-speed, low-traction conditions; up to approximately 25
mph (40 km/h).


TCS monitors the speed of all four wheels. When it senses a front wheel losing traction, it applies braking to that wheel. The TCS indicator flashes when this occurs.


220


Driving


TTRRAACCTTIIOONN CCOONNTTRROOLL SSYYSSTTEEMM IINNDDIICCAATTOORR


Driving with TCS requires no special skills or technique. The TCS does not control your car’s whole braking system and cannot prevent skidding if you enter a corner too fast. It is still your responsibility to drive at reasonable speeds and to leave a sufficient margin of safety.


Main MenuTable of Contentsst 01/06/13 19:03:51 31S82640_226


Rain, fog, and snow conditions require a different driving technique because of reduced traction and visibility. Keep your car well- maintained and exercise greater caution when you need to drive in bad weather. The cruise control should not be used in these conditions.


Driving in Bad Weather


Exercise extra caution when driving in rain after a long dry spell. After months of dry weather, the first rains bring oil to the surface of the roadway, making it slippery.


− Always drive


Driving Technique slower than you would in dry weather. It takes your car longer to react, even in conditions that may seem just barely damp. Apply smooth, even pressure to all the controls. Abrupt steering wheel movements or sudden, hard appli- cation of the brakes can cause loss of control in wet weather. Be extra cautious for the first few miles (kilometers) of driving while you adjust to the change in driving conditions. This is especially true in snow. A person can forget some snow-driving techniques during the summer months. Practice is needed to relearn those skills.


CONTINUED


Driving 223


Main MenuTable of Contentsst 01/06/13 19:04:00 31S82640_227


Driving in Bad Weather



Being able to see


Visibility clearly in all directions and being visible to other drivers are important in all weather conditions. This is more difficult in bad weather. To be seen more clearly during daylight hours, turn on your headlights.


Inspect your windshield wipers and washers frequently. Keep the wind- shield washer reservoir full of the proper fluid. Have the windshield wiper blades replaced if they start to streak the windshield or leave parts unwiped. Use the defroster and air conditioning to keep the windows from fogging up on the inside (see pages


and


121


113


).


224


Driving



Traction Check your tires frequently for wear and proper pressure. Both are important in preventing ‘‘hydroplaning’’ (loss of traction on a wet surface). In the winter, mount snow tires on all four wheels for the best handling.


Watch road conditions carefully, they can change from moment to moment. Wet leaves can be as slip- pery as ice. ‘‘Clear’’ roads can have patches of ice. Driving conditions can be very hazardous when the outside temperature is near freezing. The road surface can become covered with areas of water puddles mixed with areas of ice, so your traction can change without warning.


Be careful when downshifting. If traction is low, you can lock up the drive wheels for a moment and cause askid.


Be very cautious when passing, or being passed by other vehicles. The spray from large vehicles reduces your visibility, and the wind buffeting can cause you to lose control.


Main MenuTable of Contentsst 01/06/13 19:04:08 31S82640_228


Load Limits


Your Honda has been designed primarily to carry passengers and their cargo. You can use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section.


Towing a Trailer


The total


Total Trailer Weight: weight of the trailer and everything loaded in it must not exceed 1,000 lbs (450 kg). Towing a load that is too heavy can seriously affect your vehicle’s handling and performance. It can also damage the engine and drivetrain.


The weight that


Tongue Load: the tongue of a fully-loaded trailer puts on the hitch should be approximately 10 percent of the trailer weight. Too little tongue load can make the trailer unstable and cause it to sway. Too much tongue load reduces front-tire traction and steering control.


CONTINUED


Driving 225


Main MenuTable of Contentsst 01/06/13 19:04:17 31S82640_229


Towing a Trailer


To achieve a proper tongue load, start by loading 60 percent of the load toward the front of the trailer and 40 percent toward the rear, then re-adjust the load as needed.


Gross Axle Weight Rating (GAWR): The total weight of the vehicle, all occupants, all cargo, and the tongue load must not exceed:


Gross Vehicle Weight Rating (GVWR): The total weight of the vehicle, all occupants, all cargo, the tongue load must not exceed:


and


(Special Edition and U.S. LX) 3,990 lbs (1,810 kg) (EX) 4,035 lbs (1,830 kg) (LX-V6, EX-V6) 4,235 lbs (1,920 kg)


(Special Edition and U.S. LX) 2,160 lbs (980 kg) (EX) 2,185 lbs (990 kg) (Special Edition and U.S. LX-V6, EX-V6) 2,315 lbs (1,050 kg) on the front axle


(Special Edition and U.S. LX) 1,895 lbs (860 kg) (EX) 1,920 lbs (870 kg) (LX-V6, EX-V6) 1,940 lbs (880 kg) on the rear axle


226


Driving


Exceeding load limits or improperly loading your vehicle and trailer can cause a crash in which you can be seriously injured or killed.


Check the loading of your vehicle and trailer carefully before starting to drive.


Main MenuTable of Contentsst 01/06/13 19:04:29 31S82640_230


Checking Loads The best way to confirm that vehicle and trailer weights are within limits is to have them checked at a public scale.


Using a suitable scale or a special tongue load gauge, check the tongue load the first time you set up a towing combination (a fully-loaded vehicle and trailer), then recheck the tongue load whenever the conditions change.


Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, and how much load you are towing.


Discuss your needs with your trailer sales or rental agency, and follow the guidelines in the rest of this section. Also make sure that all equipment is properly installed and that it meets federal, state, province, and local regulations.


Hitches Any hitch used on your vehicle must be properly bolted to the underbody.


Towing a Trailer


SafetyChains Always use safety chains. Make sure they are secured to both the trailer and hitch, and that they cross under the tongue so they can catch the trailer if it becomes unhitched. Leave enough slack to allow the trailer to turn corners easily, but do not let the chains drag on the ground.


CONTINUED


Driving 227


Main MenuTable of Contentsst 01/06/13 19:04:38 31S82640_231


Towing a Trailer


TrailerBrakes Honda recommends that any trailer having a total weight of 1,000 lbs (450 kg) or more be equipped with its own electric or surge-type brakes.


If you choose electric brakes, be sure they are electronically actuated. Do not attempt to tap into your vehicle’s hydraulic system. No matter how successful it may seem, any attempt to attach trailer brakes to your vehicle’s hydraulic system will lower braking effectiveness and create a potential hazard.


228


Driving


TrailerLights


GGRROOUUNNDD ((BBLLAACCKK))


BBAACCKK--UUPP LLIIGGHHTT ((GGRREEEENN//BBLLAACCKK))


LLEEFFTT TTUURRNN SSIIGGNNAALL ((GGRREEEENN//BBLLUUEE))


RRIIGGHHTT TTUURRNN SSIIGGNNAALL ((GGRREEEENN//YYEELLLLOOWW))


BBRRAAKKEE LLIIGGHHTT ((WWHHIITTEE//BBLLAACCKK))


TTAAIILLLLIIGGHHTT ((RREEDD//BBLLAACCKK))


Your car has a trailer lighting connector located in the trunk by the left taillight. Refer to the drawing above for the wiring color code and purpose of each pin.


Since lighting and wiring vary in trailer type and brand, you should also have a qualified mechanic install a suitable connector between the vehicle and the trailer.


If you use a converter, you can get the connector and pins that mate with the connector in your car from your Honda dealer.


Main MenuTable of Contentsst 01/06/13 19:04:49 31S82640_232


AdditionalTrailerEquipment Many states and Canadian provinces require special outside mirrors when towing a trailer. Even if they don’t, you should install special mirrors if you cannot clearly see behind you, or if the trailer creates a blind spot.


Ask your trailer sales or rental agency if any other items are recommended or required for your towing situation.


Towing a Trailer


Your vehicle tires and spare are properly inflated (see page ), 283
and the trailer tires and spare are inflated as recommended by the trailer maker.


Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following:


The vehicle has been properly serviced, and the tires, brakes, suspension, and cooling system are in good operating condition.


All weights and loads are within ). limits (see pages


and


225


226


The hitch, safety chains, and any other attachments are secure.


All items on and in the trailer are properly secured and cannot shift while you drive.


The lights and brakes on your vehicle and the trailer are working properly.


Driving 229


Main MenuTable of Contentsst 01/06/13 19:05:02 31S82640_233


Towing a Trailer


Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques.


For your safety and the safety of others, take time to practice driving maneuvers before heading for the open road, and follow the guidelines discussed below.


TowingSpeedsandGears Drive slower than normal in all driving situations, and obey posted speed limits for vehicles with trailers. If you have an automatic transmission, use the D position when towing a trailer on level roads. D is the proper shift lever position to use when towing a trailer in hilly terrain. (See ‘‘ DrivingonHills next column for additional gear information.)


’’ in the


230


Driving


If you must stop when facing uphill, use the foot brake or parking brake. Do not try to hold the vehicle in place by pressing on the accelerator, as this can cause the automatic transmission to overheat.


When driving down hills, reduce your speed and shift down to 2nd gear. Do not ‘‘ride’’ the brakes, and remember it will take longer to slow down and stop when towing a trailer.


MakingTurnsandBraking Make turns more slowly and wider than normal. The trailer tracks a smaller are than your vehicle, and it can hit or run over something the vehicle misses. Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over.


DrivingonHills When climbing hills, closely watch your temperature gauge. If it nears the red (Hot) mark, turn the air conditioning off, reduce speed and, if necessary, pull to the side of the road to let the engine cool.


If the automatic transmission shifts frequently between 3rd and 4th gears while going up a hill, shift to D .


Main MenuTable of Contentsst 01/06/13 19:05:09 31S82640_234


Towing a Trailer


HandlingCrosswindsandBuffeting Crosswinds and air turbulence caused by passing trucks can disrupt your steering and cause trailer swaying. When being passed by a large vehicle, keep a constant speed and steer straight ahead. Do not try to make quick steering or braking corrections.


Parking Follow all normal precautions when parking, including firmly setting the parking brake and putting the transmission in Park (automatic) or in 1st or Reverse (manual). Also, place wheel chocks at each of the trailer’s tires.


BackingUp Always drive slowly and have someone guide you when backing up. Grip the wheel; then turn the wheel to the left to get the trailer to move to the left, and turn the wheel right to move the trailer to the right.


of the steering


bottom


Driving 231


Main MenuTable of Contentsst 01/06/13 19:05:18 31S82640_236


This section explains why it is important to keep your car well maintained and to follow basic maintenance safety precautions.


This section also includes Maintenance Schedules for normal driving and severe driving conditions, a Maintenance Record, and instruc- tions for simple maintenance tasks you may want to take care of yourself.


If you have the skills and tools to per- form more complex maintenance tasks on your Honda, you may want to purchase the Service Manual. See page for information on how to obtain a copy, or see your Honda dealer.


361


Maintenance Safety


...................... . 234
Important Safety Precautions . 235
................. . 236
Maintenance Schedule Required Maintenance Record . 243
...


Owner Maintenance Checks Fluid Locations Engine Oil


Adding Oil Recommended Oil Synthetic Oil Additives Changing the Oil and Filter


....... .............................. ...................................... .................................. .................... .............................. .................................... ..... ............................. ............ ....... .................... .......................


Adding Engine Coolant Replacing Engine Coolant


Windshield Washers Transmission Fluid


Cooling System


. 245
. 246
. 248
. 248
. 248
. 250
. 250
. 250
. 253
. 253
. 255
. 260
. 261


.........................


. 261


Automatic


Transmission 5-speed Manual Transmission


Brake and Clutch Fluid


......................... ................ ............................ ........................... .............................. ..................... ....................................


. 263
. 264
. 264
. 265
. 266
. 267
. 269


Brake System Clutch System


Power Steering Air Cleaner Element Hood Latch Spark Plugs


(4-cylinder Models)


.............. ..............................


. 269
. 269


Replacement


Maintenance


............................


. 270


Specifications


Spark Plugs


(6-cylinder Models)


Replacement Specifications


Battery Wiper Blades Air Conditioning System Dust and Pollen Filter Drive Belts Timing Belt Tires


.............. .............................. ............................ ........................................... ................................. .............. ................. ..................................... .................................... ............................................... ...................................... .................................. .............................. ............................. ... ...................... .......................... ............................. ............................ ............................................. ..................... ........................ ...........................


Inflation Inspection Maintenance Tire Rotation Replacing Tires and Wheels Wheels and Tires Winter Driving


Headlight Aiming Replacing Bulbs Storing Your Car


Snow Tires Tire Chains


Lights


. 271
. 271
. 273
. 274
. 277
. 279
. 280
. 280
. 281
. 282
. 282
. 283
. 284
. 285
. 285
. 286
. 286
. 287
. 287
. 288
. 290
. 290
. 301


Maintenance 233


Main Menu 01/06/13 19:05:25 31S82640_237


Maintenance Safety


Regularly maintaining your car is the best way to protect your investment. Proper maintenance is essential to your safety and the safety of your passengers. It will also reward you with more economical, trouble-free driving and help reduce air pollution.


This section includes instructions for simple maintenance tasks, such as checking and adding oil. Any service items not detailed in this section should be performed by a Honda technician or other qualified mechanic.


Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.


Improperly maintaining this car or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.


Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.


234


Maintenance


Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.


Always follow the procedures and precautions in this owner’s manual.


Main MenuTable of Contentsst 01/06/13 19:05:34 31S82640_238


Maintenance Safety


Important Safety Precautions Before you begin any maintenance, make sure your car is parked on level ground and that the parking brake is set. Also, be sure the engine is off. This will help to eliminate several potential hazards:


Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine.


Burns from hot parts. Let the engine and exhaust system cool before touching any parts.


Injury from moving parts. not run the engine unless in- structed to do so.


Do


Read the instructions before you begin, and make sure you have the tools and skills required.


To reduce the possibility of fire or explosion, be careful when working around gasoline or batteries. Use a commercially available degreaser or parts cleaner, not gasoline, to clean parts. Keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.


You should wear eye protection and protective clothing when working near the battery or when using compressed air.


Maintenance


235


Main MenuTable of Contentsst 01/06/13 19:05:44 31S82640_239


Maintenance Schedule


The Maintenance Schedule specifies how often you should have your car serviced and what things need attention. It is essential that you have your car serviced as scheduled to retain its high level of safety, dependability, and emissions control performance.


236


Maintenance


Which Schedule to Follow: Service your car according to the time and mileage periods on one of the Maintenance Schedules on the following pages. Select the schedule for ‘‘Severe Conditions’’ if most of your driving is done under one or more of the conditions listed on that page. Otherwise, follow the schedule for ‘‘Normal Conditions.’’


The services and time or distance intervals shown in the maintenance schedule assume you will use your car as normal transportation for passengers and their possessions. You should also follow these recommendations:


Avoidexceedingyourcar’sload limit.Thisputsexcessstresson the engine, brakes, and many other parts of your car. The load limit is shown on the label on the driver’s doorjamb.


Operate your car on reasonable roads within the legal speed limit.


Drive your car regularly over a distance of several miles (kilometers).


Always use unleaded gasoline with the proper octane rating (see page 192


).


Main MenuTable of Contentsst 01/06/13 19:05:51 31S82640_240


Your authorized Honda dealer knows your car best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Keep all the receipts as proof of completion, and have the person who does the work fill out the Maintenance Record. Check your warranty booklet for more information.


We recommend the use of genuine Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high- quality standards as the original components, so you can be confident of their performance and durability.


U.S. Cars: Maintenance, replacement or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.


Maintenance Schedule



According to state and federal regulations, failure to perform maintenance on the items marked with will not void your emissions warranties. However, Honda recommends that all maintenance services be performed at the recommended time or mileage period to ensure long-term reliability.


Maintenance


237


Main MenuTable of Contentsst 01/06/13 19:06:12 31S82640_241



Service at the indicated distance or time whichever comes first. Replace engine oil Replace engine oil filter Check engine oil and coolant Replace air cleaner element Inspect valve clearance Replace spark plugs Replace timing belt, balancer belt * water pump Inspect and adjust drive belts Inspect idle speed Replace engine coolant


Replace transmission fluid


MT AT


Inspect front and rear brakes Replace brake fluid Check parking brake adjustment Replace dust and pollen filter Rotate tires (Check tire inflation and condition at least once per month)


miles x 1,000
km x 1,000
months


15
24
12


, and inspect


30
105
48
168
24
84
Replace every 7,500 miles (12,000 km) or 1 year


75
120
60


90
144
72


45
72
36


60
96
48


120
192
96


Check oil and coolant at each fuel stop


Adjust only if noisy


120,000 miles (192,000 km) or 10 years, then every 60,000 miles


(96,000 km) or 5 years


Every 120,000 miles (192,000 km) or 6 years


120,000 miles (192,000 km) or 6 years, then every


90,000 miles (144,000 km) or 5 years


Every 3 years (independent of mileage)


Rotate tires every 7,500 miles (12,000 km)


U.S. Owners Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.


NOTE: If you only drive under a OCCASIONALLY ‘‘severe’’ condition, you should follow the Normal Conditions Maintenance Schedule.


Canadian Owners Follow the Maintenance Schedule for Severe Conditions.



1 :



Balancer belt applies to 4-cylinder models only. See information on maintenance and emissions warranty, last column, page 237


Visually inspect the following items:


Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS) All fluid levels and condition of fluids Cooling system hoses and connections Exhaust system # Fuel lines and connections #


238


Maintenance


Main MenuTable of Contentsst 01/06/13 19:06:22 31S82640_242


Service at the indicated distance or time, whichever comes first. Do the items in U.S. Owners Canadian Owners


Use the Maintenance Schedule for Severe Conditions.


to determine which schedule to use.


Refer to page


238




A, B, C, D


as required for each distance/time interval.


7,500 mi/12,000 km 15,000 mi/24,000 km/1 yr 22,500 mi/36,000 km 30,000 mi/48,000 km/2 yrs 37,500 mi/60,000 km 3 yrs (independent of mileage) 45,000 mi/72,000 km/3 yrs 52,500 mi/84,000 km 60,000 mi/96,000 km/4 yrs 67,500 mi/108,000 km 75,000 mi/120,000 km/5 yrs 82,500 mi/132,000 km 90,000 mi/144,000 km/6 yrs 6 yrs (independent of mileage) 97,500 mi/156,000 km 105,000 mi/168,000 km/7 yrs


112,500 mi/180,000 km 120,000 mi/192,000 km/8 yrs 120,000 mi/192,000 km/10 yrs then replace every 60,000 mi/ 96,000 km/5 yrs 120,000 mi/192,000 km/6 yrs 120,000 mi/192,000 km/6 yrs then replace every 90,000 mi/ 144,000 km/5 yrs


Do items in A. Do items in A, B. Do items in A. Do items in A, B, C. Do items in A. Do item in D. Do items in A, B. Do items in A. Do items in A, B, C. Do items in A. Do items in A, B. Do items in A. Do items in A, B, C. Do item in D. Do items in A. □ water pump. □ □ □ Do items in A, B. Do items in A. Do items in A, B, C. □


Check idle speed. Inspect valve clearance. Replace spark plugs.


Replace engine coolant.


Replace timing belt, balancer belt , and inspect





□ □ □ □ □ □ □ □ □ □


□ □ □ □ □ □ □


Replace engine oil. Rotate tires (follow pattern on page 267 ). Replace engine oil filter. Inspect front and rear brakes. Check parking brake adjustment. Inspect tie rod ends, steering gear box and boots. Inspect suspension components. Inspect driveshaft boots. Inspect brake hoses and lines (including ABS). Check all fluid levels, condition of fluids, and check for leaks. Inspect cooling system hoses and connections. Inspect exhaust system. # Inspect fuel lines and connections. # Replace air cleaner element. Inspect and adjust drive belts. Replace dust and pollen filter. Replace brake fluid every 3 years (independent of mileage).


See information on maintenance and emissions warranty, last column, page Balancer belt applies to 4-cylinder models only.


237


□ □


Replace manual transmission fluid. Replace automatic transmission fluid.


NOTE: · ·


Check engine oil and coolant at each fuel stop. Check and adjust valve clearance, cold engine, only if noisy.


Maintenance 239


Main MenuTable of Contentsst miles x 1,000
km x 1,000
months


15
24
12


30
48
24


45
72
36


60
96
48


75
120
60


90
144
72


105
168
84


120
192
96


Replace every 3,750 miles (6,000 km) or 6 months


Check oil and coolant at each fuel stop


Adjust only if noisy


120,000 miles (192,000 km) or 10 years, then every 60,000


miles (96,000 km) or 5 years


Every 60,000 miles (96,000 km) or 3 years


60,000 miles (96,000 km) or 3 years, then every 30,000 miles (48,000 km) or 2 years


Inspect every 7,500 miles (12,000 km) or 6 months


Every 3 years (independent of mileage)


Rotate tires every 7,500 miles (12,000 km)


Visually inspect the following items:


Every 7,500 miles (12,000 km) or 6 months


01/06/13 19:06:47 31S82640_243


Use normal schedule except in dusty


) air cleaner element



) or replace (


Service at the indicated distance or time whichever comes first. Replace engine oil and oil filter Check engine oil and coolant Clean ( − conditions Inspect valve clearance Replace spark plugs Replace timing belt # inspect water pump Inspect and adjust drive belts Inspect idle speed Replace engine coolant



, balancer belt


* *


1,


, and


Replace transmission fluid


MT AT


Inspect front and rear brakes Replace brake fluid Check parking brake adjustment Replace dust and pollen filter Lubricate all hinges, locks, and latches Rotate tires (Check tire inflation and condition at least once per month)



Tie rod ends, steering gear box, and boots Suspension components, Driveshaft boots Brake hoses and lines (including ABS) All fluid levels and conditions of fluids Cooling system hoses and connections Exhaust system, Fuel lines and connections # Lights and controls, Vehicle underbody * 1 : * 2 : * 3 : 240


See timing belt on page Balancer belt applies to 4-cylinder models only. See dust and pollen filter on page


Maintenance


281


280



for replacement information under special driving conditions.


for replacement information under special driving conditions.


U.S. Owners Follow the Severe Conditions Maintenance Schedule if you drive your car under one or more of the following conditions:


MAINLY


Driving less than 5 miles (8
km) per trip or, in freezing temperatures, driving less than 10 miles (16 km) per trip. Driving in extremely hot [over 90°F (32°C)] conditions. Extensive idling or long periods of stop-and-go driving. Trailer towing, driving with a roof rack, or driving in mountainous conditions. Driving on muddy, dusty, or de-iced roads.


Canadian Owners Follow the Maintenance Schedule for Severe Conditions.



See information on maintenance and emissions warranty, last column, page 237


Main MenuTable of Contentsst 01/06/13 19:07:01 31S82640_244


Service at the indicated distance or time, whichever comes first. Do the items in U.S. Owners Canadian Owners


Use the Maintenance Schedule for Severe Conditions.


to determine which schedule to use.


Refer to page


240




A, B, C, D, E


as required for each distance/time.


3,750 mi/6,000 km 7,500 mi/12,000 km 11,250 mi/18,000 km 15,000 mi/24,000 km/1 yr


18,750 mi/30,000 km 22,500 mi/36,000 km 26,250 mi/42,000 km 30,000 mi/48,000 km/2 yrs 33,750 mi/54,000 km 37,500 mi/60,000 km 41,250 mi/66,000 km 45,000 mi/72,000 km/3 yrs


3 yrs (independent of mileage) 48,750 mi/78,000 km 52,500 mi/84,000 km 56,250 mi/90,000 km 60,000 mi/96,000 km/4 yrs


60,000 mi/96,000 km/3 yrs 60,000 mi/96,000 km/3 yrs then replace every 30,000 mi/ 48,000 km/2 yrs 63,750 mi/102,000 km 67,500 mi/108,000 km 71,250 mi/114,000 km


Clean air cleaner element.


Do items in A. Do items in A, B. Do items in A. □ Do items in A, B, C. Do items in A. Do items in A, B. Do items in A. Do items in A, B, C, D. Do items in A. Do items in A, B. Do items in A. □ Do items in A, B, C, E. Do item in E. Do items in A. Do items in A, B. Do items in A. □ # inspect water pump. Do items in A, B, C, D. □ □


Clean air cleaner element.


Replace timing belt *


, balancer belt


* *


1,


, and


Replace MT fluid. Replace automatic transmission fluid.


□ □


□ □ □ □ □ □ □ □


Replace engine oil and filter. Inspect front and rear brakes. Rotate tires (follow pattern on page 267 ). Inspect tie rod ends, steering gear box and boots. Inspect suspension components. Inspect driveshaft boots. Check parking brake adjustment. Lubricate all hinges, locks, and latches with multipurpose grease. Inspect brake hoses and lines (including ABS). Check all fluid levels, condition of fluids, and check for leaks. Inspect cooling system hoses and connections. □ Inspect exhaust system. □ # Inspect fuel lines and connections. □ # Check all lights. □ Inspect the underbody. □ Replace air cleaner element. □ Inspect and adjust drive belts. □ Replace dust and pollen filter . □ * Replace brake fluid every 3 years (independent of □ mileage).


Do items in A. Do items in A, B. Do items in A.


NOTE: · ·


Check engine oil and coolant at each fuel stop. Check and adjust valve clearance, cold engine, only if noisy.


for replacement information under special driving conditions.


* * *


1 : 2 : 3 :



281


See timing belt on page Balancer belt applies to 4-cylinder models only. See dust and pollen filter on page conditions. See information on maintenance and emissions warranty, last column, page


280


for replacement information under special driving


237


CONTINUED Maintenance 241


Main MenuTable of Contentsst 01/06/13 19:07:08 31S82640_245


75,000 mi/120,000 km/5 yrs


78,750 mi/126,000 km 82,500 mi/132,000 km 86,250 mi/138,000 km 90,000 mi/144,000 km/6 yrs 90,000 mi/144,000 km/5 yrs 6 yrs (independent of mileage) 93,750 mi/150,000 km 97,500 mi/156,000 km 101,250 mi/162,000 km 105,000 mi/168,000 km/7 yrs


108,750 mi/174,000 km 112,500 mi/180,000 km 116,250 mi/186,000 km 120,000 mi/192,000 km/8 yrs


120,000 mi/192,000 km/10 yrs then replace every 60,000 mi/ 96,000 km/5 yrs 120,000 mi/192,000 km/6 yrs 120,000 mi/192,000 km/7 yrs


242


Maintenance



1 :


* *


2 : 3 :



281


for replacement information under


See timing belt on page special driving conditions. Balancer belt applies to 4-cylinder models only. See dust and pollen filter on page under special driving conditions. See information on maintenance and emissions warranty, last column, page


237


280


for replacement information


NOTE: · ·


Check engine oil and coolant at each fuel stop. Check and adjust valve clearance, cold engine, only if noisy.


1,


, and * *


Loading...
x