2007 Ford Ranger Owners Manual

mode, press to play the tracks within the current directory in random order. 7. REPEAT: Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEAT again to deactivate. 8. FF (Fast forward): Press to manually advance in a CD/MP3
track. 9. REW (Rewind): Press to manually reverse in a CD/MP3 track.

REW

10. Memory presets: To set a station: Select frequency band AM/FM; tune to a station, press and hold a preset button until sound returns. To recall a previously set station, press the desired memory preset button briefly. You can save up to 18 stations, six in AM, six in FM1 and FM2. In Satellite Radio mode (if equipped), there are 18 available presets, six each for SAT1, SAT2 and SAT3. To save satellite channels in your memory presets, tune to the desired channel then press and hold a preset control until sound returns. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 11. SEEK/TRACK: Press to access ) strong the previous/next ( station. In CD/MP3 mode, press to advance to the previous/next

) track.

26

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

to seek to the

SEEK

SEEK

SEEK

SEEK

SEEK

TUNE

to select a category.

to select a channel within

to view the previous/additional

to seek to the previous/next channel in to fast seek through

In Satellite Radio mode (if equipped), press previous/next channel. If a specific category is selected, (Jazz, Rock, News, etc.), press the selected category. Press and hold the previous /next channels. In TEXT MODE, press display text. In CATEGORY ALL, press In CATEGORY MODE, press that category. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 12. TEXT/SCAN: In radio and CD mode, press for a brief sampling of radio stations or CD tracks. Press again to stop. In MP3 flat file mode, press and hold to hear a brief sampling of MP3
tracks. In MP3 directory mode, press and hold to hear a brief sampling of all tracks in the current directory. Press and hold again to stop. In MP3 music name/file name mode, press and release to view the next 12 characters in the MP3 music name/file name of the current MP3 track and directory. In Satellite Radio mode (if equipped), press and release to view the Satellite text message. In Satellite Radio mode (if equipped), press and hold to hear a brief sampling of the next channels. Press and hold again to stop. 13. AM/FM: Press to select AM/FM1/FM2 frequency band.

14. AUX: Press to scroll through SAT1, SAT2, SAT3 (Satellite Radio modes, if equipped) and LINE IN (Auxiliary audio mode, if equipped). To return to radio mode, press AM/FM. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability.

27

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

15. ON/OFF/Volume: Press to turn ON/OFF. Turn to increase/decrease volume. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. 16. CD: Press to enter CD/MP3
mode. If a CD/MP3 is already present in the system, the disc will begin to play. 17. CD slot: Insert a CD/MP3 label side up.

CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information.

28

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Premium and Audiophile in-dash CD6/MP3 disc Pioneer audio systems (if equipped)

1. AM/FM: Press to select AM/FM1/FM2 frequency bands.

2. CD: Press to enter CD/MP3
mode. If a CD/MP3 is already in the system, the disc will start playing. 3. EJ (CD eject): To eject an individual CD/MP3, press the eject control and select the correct slot number by pressing the corresponding memory preset. Press and hold to eject all CD/MP3s. 4. CLK (Clock): Press CLK until SELECT HOUR or SELECT MINS is displayed. Press adjust the hours/minutes. Press CLK to display the time when the ignition is off.

MENU

to

29

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

5. MUTE: Press to mute the playing media. Press again to return to the playing media.

to make

6. MENU: Press MENU repeatedly to toggle through the following modes and use adjustment in those modes. Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2 . Press MENU to access. Use When the six strongest stations are filled, the station stored in preset 1
will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets. Bass: Press

to decrease/increase the bass setting.

MENU

MENU

to set.

Treble: Press

MENU

to decrease/increase the treble setting.

MENU

MENU

to go to

to adjust the audio between the left and

to adjust the audio between the front and

Balance: Press right speakers. Fade: Press rear speakers. Next/previous directory: In MP3 mode, press MENU the previous/next directory. Flat file/directory mode: In MP3 mode, press MENU to access this to select flat file mode or directory mode. feature. Use Track #/normal music name/file name: Press MENU to access and use music name or file name). 7. TUNE/DISC: Press to manually go down/up ( frequency, select the previous/next CD or to select various settings in menu mode. 8. TEXT: In MP3 music name/file name mode, press to view the next 12
characters in the MP3 music name/filename of the current MP3 track and directory.

to scroll through MP3 display options (track #, normal

) the radio

MENU

30

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

9. SHUFF (Shuffle): Press to play the tracks on the current CD/MP3 in random order. In MP3 directory mode, press to play the tracks within the current directory in random order. 10. Compression: In CD/MP3
modes, press to bring loud and soft passages together for a more consistent listening level. 11. REPEAT: Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEAT again to deactivate. 12. FF (Fast forward): Press to manually advance in a CD/MP3
track. 13. REW (Rewind): Press to manually reverse in a CD/MP3 track.

REW

14. Memory presets: To set a station: Select frequency band AM/FM; tune to a station, press and hold a preset button until sound returns. To select a preset station, press the desired memory preset. 15. SEEK/TRACK: In radio, CD and MP3 flat file mode, press to access the previous/next strong station or track. In MP3 directory mode, press to select the next/previous track in the current directory. 16. SCAN: In radio, CD and MP3
flat file mode, press for a brief sampling of radio stations or CD/MP3 tracks. In MP3 directory mode, press to hear a brief sampling of all tracks in the current directory. Press again to stop. 17. ON/OFF/Volume: Press to turn ON/OFF. Turn to increase/decrease volume. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

31

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

18. LOAD: Press to load a CD/MP3. To load a CD/MP3 disc to a specific slot, press LOAD and select the slot number by pressing the corresponding memory preset. Press and hold LOAD to autoload up to six discs. 19. CD slot: Insert a CD/MP3, label side up. CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information. Premium and Audiophile In-dash CD6/MP3 disc satellite compatible audio systems (if equipped)

32

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

1. AM/FM: Press to select AM/FM1/FM2 frequency bands.

2. CD: Press to enter CD/MP3
mode. If a CD/MP3 is already in the system, the disc will start playing. 3. AUX: Press AUX to cycle through SAT1, SAT2, SAT3 (Satellite radio modes, if equipped) and LINE IN (Auxiliary audio mode, if equipped). To return to radio mode, press AM/FM. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 4. EJ (CD eject): To eject an individual CD/MP3, press the eject control and select the correct slot number by pressing the corresponding memory preset. Press and hold to eject all loaded CDs. 5. CLK (Clock): Press CLK until SELECT HOUR or SELECT MINS is displayed. Press adjust the hours/minutes. Press CLK to display the time when the ignition is off. 6. MUTE: Press to mute the playing media. Press again to return to the playing media.

MENU

to

to make

7. MENU: Press MENU repeatedly to toggle through the following modes and use adjustment in those modes. CATEGORY (Satellite Radio if equipped): Press MENU until the currently active category appears in the display (CATEGORY ALL). In CATEGORY ALL, press Sirius Categories (Pop, Rock, News, etc.) Press or SCAN to select the channels within each category. After a category is selected, press SEEK to search for that specific channel. To select a different

to scroll through the list of available

SEEK

33

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

to select a different category.

category, press MENU until CATEGORY ALL appears in the display. Press Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2 . Press MENU to access. Use When the six strongest stations are filled, the station stored in preset 1
will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets. Bass: Press

to decrease/increase the bass setting.

MENU

MENU

to set.

Treble: Press

MENU

to decrease/increase the treble setting.

to go to

MENU

MENU

MENU

to adjust the audio between the left and

to adjust the audio between the front and

to scroll through MP3 display options (track #, normal

Balance: Press right speakers. Fade: Press rear speakers. Next/previous directory: In MP3 mode, press MENU the previous/next directory. Flat file/directory mode: In MP3 mode, press MENU to access this feature. Use to select flat file mode or directory mode. Track #/ normal music name/file name: Press MENU to access and use music name or file name). 8. TUNE/DISC: In radio mode, press to manually go down/up ) the radio frequency, or to access another CD. Also use in menu mode to select various settings. In CATEGORY ALL, press SIRIUS channel categories (Pop, Rock, News, etc.). Refer to Category Mode under Menu for further information. 9. SHUFF (Shuffle): Press to play the tracks on the current CD/MP3 in random order. In MP3 directory mode, press to play the tracks within the current directory in random order.

to scroll through the list of available

34

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

10. COMP (Compression): In CD/MP3 modes, press to bring loud and soft passages together for a more consistent listening level. 11. REPEAT: Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEAT again to deactivate. 12. FF (Fast forward): Press to manually advance in a CD/MP3
track. 13. REW (Rewind): Press to manually reverse in a CD/MP3 track.

REW

FF

REW

COMP

SHUFF

REPEAT

14. Memory presets: To set a station: Select frequency band AM/FM; tune to a station, press and hold a preset button until sound returns. To select a preset station, press the desired memory preset. You can save up to 18 stations, six in AM, six in FM1 and FM2. In Satellite Radio mode (if equipped), there are 18 available presets, six each for SAT1, SAT2 and SAT3. To save satellite channels in your memory presets, tune to the desired channel then press and hold a preset control until sound returns. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 15. SEEK/TRACK: In radio, CD and MP3 flat file mode, press previous/next strong station or track. In MP3 directory mode, press to select the next/previous track in the current directory. In Satellite Radio mode (if equipped), press previous/next channel. If a specific category is selected, (Jazz, Rock, News, etc.), press the selected category. Press and hold the previous /next channels.

to seek to the previous/next channel in to fast seek through

to seek to the

to access the

SEEK

SEEK

SEEK

35

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

SEEK

SEEK

TUNE

to select a category.

to select a channel within

to view the previous/additional

In TEXT MODE, press display text. In CATEGORY ALL, press In CATEGORY MODE, press that category. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 16. TEXT/SCAN: In radio and CD mode, press for a brief sampling of radio stations or CD tracks. Press again to stop. In MP3 flat file mode, press and hold to hear a brief sampling of MP3
tracks. In MP3 directory mode, press and hold to hear a brief sampling of all tracks in the current directory. Press and hold again to stop. In MP3 music name/file name mode, press and release to view the next 12 characters in the MP3 music name/file name of the current MP3 track and directory. In Satellite Radio mode (if equipped), press and release to view the Satellite text message. In Satellite Radio mode (if equipped), press and hold to hear a brief sampling of the next channels. Press and hold again to stop. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 17. ON/OFF/Volume: Press to turn ON/OFF. Turn to increase/decrease volume. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. 18. LOAD: Press to load a CD/MP3. To load a CD/MP3 disc to a specific slot, press LOAD and select the slot number by pressing the memory preset buttons. Press and hold LOAD to autoload up to six discs.

36

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

19. CD slot: Insert a CD/MP3, label side up.

CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information.

Tremor IV CD/MP3 audio system (if equipped)

1. EJ (CD eject): To eject an individual CD, press the eject control and select the correct slot number by pressing the corresponding memory preset. Press and hold to eject all loaded CDs.

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

37

Entertainment Systems

2. CD: Press to enter CD/MP3
mode. If a CD/MP3 is already present in the system, the disc will begin play.

3. CLK (Clock): Press CLK until SELECT HOUR/SELECT MINUTE is displayed. Press TUNE ( to adjust the hours/minutes. Press CLK to display the time when the ignition is off. 4. TUNE: In radio mode, press to manually go up or down the radio frequency, or to access another CD. Also use in menu mode to select various settings. 5. TEXT: In MP3 music name/file name mode, press to view the next 12 characters in the MP3 music name/file name of the current MP3 track and directory. 6. SHUFF (Shuffle): Press to play the tracks on the current CD/MP3 in random order. In MP3 directory mode, press to play the tracks within the current directory in random order. 7. COMP (Compression): In CD/MP3 modes, press to bring soft and loud passages together for a more consistent listening level. 8. MENU: Press MENU to toggle through the following modes to make and adjustments in these modes. Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2. Press MENU to access, use stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets. Press

to set. When the six strongest

again to disengage.

TUNE

TUNE

TUNE

BASS: Press

TUNE

to decrease/increase the bass levels.

38

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

to select

to go to

TUNE

TUNE

TUNE

TUNE

TUNE

to adjust the audio between the front and

to adjust the audio between the

to decrease/increase the treble

TREB (treble): Press levels. BAL (Balance):Press left and right speakers. FADE: Press TUNE rear speakers. Next/previous directory: In MP3 mode, press the previous/next directory. Flat file/directory mode: In MP3 mode, press Flat file mode or Directory mode. Track number/normal music name/file name: Press view by track number, music name or file name. 9. ON/OFF/VOL (Volume): Press to turn the system ON/OFF. Turn to adjust the volume levels. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition is turned back on. 10. SCAN: In radio, CD and MP3
flat file mode, press for a brief sampling of radio stations or CD/MP3 tracks. In MP3 directory mode, press to hear a brief sampling of all tracks in the current directory. Press again to stop. 11. REPEAT: Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEAT again to deactivate. 12. FF (fast forward): Press to manually advance in a CD/MP3
track.

to

39

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

13. Memory presets: To set a station: Select frequency band AM/FM; tune to a station, press and hold a preset button until sound returns. To select a preset station, press the desired memory preset button. 14. MUTE: Press to mute the playing media. Press again to return to the playing media. 15. REW (rewind): Press to manually reverse a CD/MP3 track.

16. SEEK: In radio, CD and MP3
to flat file mode, press access the previous/next strong station or track. In MP3 directory mode, press to select the next/previous track in the current directory. 17. AM/FM: Press to select AM/FM1/FM2 frequency band.

18. LOAD: To load a CD/MP3 disc to a specific slot, press LOAD and select the slot number by pressing the Memory Preset buttons. Press and hold LOAD to autoload up to six discs. 19. CD slot: Insert a CD/MP3, label side up.

40

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Tremor IV CD/MP3 satellite compatible audio system (if equipped)

Entertainment Systems

1. EJ (CD eject): To eject an individual CD/MP3, press the eject control and select the correct slot number by pressing the corresponding memory preset. Press and hold to eject all loaded CD/MP3s. 2. CD: Press to enter CD/MP3
mode. If a CD/MP3 is already present in the system, the disc will begin play.

3. CLK (Clock): Press CLK until SELECT HOUR/SELECT MINUTE is displayed. Press TUNE ( to adjust the hours/minutes. Press CLK to display the time when the ignition is off.

41

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

to scroll through the list of available

4. TUNE: In radio mode, press to manually go up or down the radio frequency, or to access another CD. Also use in menu mode to select various settings. In CATEGORY ALL, press Sirius channel Categories (Pop, Rock, News, etc.). Refer to Category Mode under Menu for further information. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 5. SHUFF (Shuffle): Press to play the tracks on the current CD/MP3 in random order. In MP3 directory mode, press to play the tracks within the current directory in random order. 6. COMP (Compression): In CD/MP3 modes, press to bring soft and loud passages together for a more consistent listening level. 7. MENU: Press MENU to toggle through the following modes and to make adjustments in these modes. CATEGORY (Satellite Radio if equipped): Press MENU until the currently active category appears in the display (CATEGORY ALL). In to scroll through the list of available CATEGORY ALL, press Sirius Categories (Pop, Rock, News, etc.) Press or SCAN to select the channels within each category. After a category is selected, press SEEK to search for that specific channel. To select a different category, press MENU until CATEGORY ALL appears in the display. Press Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2. Press MENU to access, use stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets. Press

to set. When the six strongest

to select a different category.

again to disengage.

TUNE

TUNE

TUNE

SEEK

42

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

BASS: Press

TUNE

to decrease/increase the bass levels.

Entertainment Systems

to

TUNE

TUNE

TUNE

TUNE

TUNE

to go to

to select

to decrease/increase the treble

to adjust the audio between the

to adjust the audio between the front and

TREB (treble): Press levels. BAL (Balance):Press left and right speakers. FADE: Press TUNE rear speakers. Next/previous directory: In MP3 mode, press the previous/next directory. Flat file/directory mode: In MP3 mode, press Flat file mode or Directory mode. Track number/normal music name/file name: Press view by track number, music name or file name. 8. ON/OFF/VOL (Volume): Press to turn the system ON/OFF. Turn to adjust the volume levels. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition is turned back on. 9. TEXT/SCAN: In radio and CD mode, press for a brief sampling of radio stations or CD tracks. Press again to stop. In MP3 flat file mode, press and hold to hear a brief sampling of MP3
tracks. In MP3 directory mode, press and hold to hear a brief sampling of all tracks in the current directory. Press and hold again to stop. In MP3 music name/file name mode, press and release to view the next 12 characters in the MP3 music name/file name of the current MP3 track and directory. In Satellite Radio mode (if equipped), press and release to view the Satellite text message. In Satellite Radio mode (if equipped), press and hold to hear a brief sampling of the next channels. Press and hold again to stop.

43

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 10. REPEAT: Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEAT again to deactivate. 11. FF (fast forward): Press to manually advance in a CD/MP3
track. 12. Memory presets: To set a station: Select frequency band AM/FM; tune to a station, press and hold a preset button until sound returns. To select a preset station, press the desired memory preset button. In Satellite Radio mode (if equipped), there are 18 available presets, six each for SAT1, SAT2 and SAT3. To save satellite channels in your memory presets, tune to the desired channel then press and hold a preset control until sound returns. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 13. MUTE: Press to mute the playing media. Press again to return to the playing media. 14. REW (rewind): Press to manually reverse a CD/MP3 track.

15. SEEK: In radio, CD and MP3
to flat file mode, press access the previous/next strong station or track. In MP3 directory mode, press to select the next/previous track in the current directory. In Satellite Radio mode (if equipped), press previous/next channel. If a specific category is selected, (Jazz, Rock, News, etc.), press the selected category. Press and hold the previous /next channels.

to seek to the previous/next channel in to fast seek through

to seek to the

SEEK

SEEK

SEEK

44

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

SEEK

TUNE

to view the previous/additional

In TEXT MODE, press display text. In CATEGORY ALL, press In CATEGORY MODE, press that category. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 16. AM/FM: Press to select AM/FM1/FM2 frequency band.

to select a channel within

to select a category.

SEEK

17. AUX: Press to cycle through SAT1, SAT2, SAT3 (Satellite radio modes, if equipped) and LINE IN (Auxiliary audio mode, if equipped). To return to radio mode, press AM/FM. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability. 18. LOAD: To load a CD/MP3 disc to a specific slot, press LOAD and select the slot number by pressing the Memory Preset buttons. Press and hold LOAD to autoload up to six discs. 19. CD slot: Insert a CD/MP3, label side up.

45

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Auxiliary input jack (if equipped) Your vehicle may be equipped with an Auxiliary Input Jack (AIJ). The Auxiliary Input Jack provides a way to connect your portable music player to the in-vehicle audio system. This allows the audio from a portable music player to be played through the vehicle speakers with high fidelity. To achieve optimal performance, please observe the following instructions when attaching your portable music device to the audio system. Required equipment: 1. Any portable music player designed to be used with headphones 2. An audio extension cable with stereo male 1/8 in. (3.5 mm) connectors at each end To play your portable music player using the auxiliary input jack: 1. Begin with the vehicle parked and the radio turned off. 2. Ensure that the battery in your portable music player is new or fully charged and that the device is turned off. 3. Attach one end of the audio extension cable to the headphone output of your player and the other end of the audio extension cable to the AIJ in your vehicle. 4. Turn the radio on, using either a tuned FM station or a CD loaded into the system. Adjust the volume to a comfortable listening level. 5. Turn the portable music player on and adjust the volume to 1/2 the volume. 6. Press AUX on the vehicle radio repeatedly until LINE IN appears in the display. You should hear audio from your portable music player although it may be low. 7. Adjust the sound on your portable music player until it reaches the level of the FM station or CD by switching back and forth between the AUX and FM or CD controls.

46

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Troubleshooting: 1. Do not connect the audio input jack to a line level output. Line level outputs are intended for connection to a home stereo and are not compatible with the AIJ. The AIJ will only work correctly with devices that have a headphone output with a volume control. 2. Do not set the portable music player’s volume level higher than is necessary to match the volume of the CD or FM radio in your audio system as this will cause distortion and will reduce sound quality. Many portable music players have different output levels, so not all players should be set at the same levels. Some players will sound best at full volume and others will need to be set at a lower volume. 3. If the music sounds distorted at lower listening levels, turn the portable music player volume down. If the problems persists, replace or recharge the batteries in the portable music player. 4. The portable music player must be controlled in the same manner when it is used with headphones as the AIJ does not provide control (play, pause, etc.) over the attached portable music player. 5. For safety reasons, connecting or adjusting the settings on your portable music player should not be attempted while the vehicle is moving. Also, the portable music player should be stored in a secure location, such as the center console or the glove box, when the vehicle is in motion. The audio extension cable must be long enough to allow the portable music player to be safely stored while the vehicle is in motion.

GENERAL AUDIO INFORMATION Radio frequencies: AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.7, 87.9–107.7, 107.9 MHz Radio reception factors: There are three factors that can affect radio reception: • Distance/strength: The further you travel from an FM station, the • Terrain: Hills, mountains, tall buildings, power lines, electric fences, traffic lights and thunderstorms can interfere with your reception. • Station overload: When you pass a broadcast tower, a stronger signal may overtake a weaker one and play while the weak station frequency is displayed.

weaker the signal and the weaker the reception.

47

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

CD/CD player care

Do:• Handle discs by their edges only. Never touch the playing surface. • Inspect discs before playing. Clean only with an approved CD cleaner

and wipe from the center out.

of time.

Don’t: • Expose discs to direct sunlight or heat sources for extended periods • Clean using a circular motion. CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information. Audio system warranty and service Refer to the Warranty Guide for audio system warranty information. If service is necessary, see your dealer or qualified technician.

Satellite radio information (if equipped) Satellite radio channels: SIRIUS broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SIRIUS satellite radio channels, visit www.sirius.com in the United States, www.sirius-canada.ca in Canada, or call SIRIUS at 1–888–539–7474. Satellite radio reception factors: To receive the satellite signal, your vehicle has been equipped with a satellite radio antenna located on the roof of your vehicle. The vehicle roof provides the best location for an unobstructed, open view of the sky, a requirement of a satellite radio system. Like AM/FM, there are several factors that can affect satellite radio reception performance: • Antenna obstructions: For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible.

48

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freeway

overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception. • Station overload: When you pass a ground based broadcast repeating tower, a stronger signal may overtake a weaker one and result in an audio mute.

Unlike AM/FM audible static, you will hear an audio mute when there is a satellite radio signal interference. Your radio display may display NO SIGNAL to indicate the interference. SIRIUS satellite radio service: SIRIUS Satellite Radio is a subscription based satellite radio service that broadcasts music, sports, news and entertainment programming. A service fee is required in order to receive SIRIUS service. Vehicles that are equipped with a factory installed SIRIUS Satellite Radio system include: • Hardware and limited subscription term, which begins on the date of • Online media player providing access to all 65 SIRIUS music channels

sale or lease of the vehicle.

over the internet (U.S. customers only).

For information on extended subscription terms, contact SIRIUS at 1–888–539–7474. Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes. Satellite Radio Electronic Serial Number (ESN): This 12–digit Satellite Serial Number is needed to activate, modify or track your satellite radio account. You will need this number when communicating with SIRIUS. While in Satellite Radio mode, you can view this number on the radio display by pressing AUX and Preset 1 control simultaneously.

49

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Radio Display

Condition

ACQUIRING

SAT FAULT

Radio requires more than two seconds to produce audio for the

selected channel. Internal module or

system failure

present.

Action Required No action required. This message should

disappear shortly.

If this message does

not clear within a short period of time, or with an ignition key cycle, your receiver may have

a fault. See your

authorized dealer for

service.

INVALID CHNL

Channel no longer

This previously

available.

UNSUBSCRIBED

Subscription not available for this

channel.

available channel is no longer available. Tune to another channel. If the channel was one of your presets, you may choose another channel for that preset button.

Contact SIRIUS at 1–888–539–7474 to

subscribe to the channel or tune to another channel.

NO TEXT

Artist information not

available.

Artist information not available at this time on

this channel. The system is working

properly.

50

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Radio Display

Condition

NO TEXT

Song title information

not available.

NO TEXT

Category information

not available.

Action Required

Song title information not available at this time on this channel. The system is working

properly.

Category information not available at this time on this channel. The system is working

properly.

NO SIGNAL

Loss of signal from

the SIRIUS satellite or SIRIUS tower to the

vehicle antenna.

You are in a location that is blocking the SIRIUS signal (i.e., tunnel, under an

overpass, dense foliage,

etc). The system is

working properly. When you move into an open area, the signal should

return.

UPDATING

CALL SIRIUS 1–888–539–7474

Update of channel programming in

No action required. The process may take up to

progress.

Satellite service has been deactivated by

SIRIUS Satellite

Radio.

three minutes. Call SIRIUS at

1–888–539–7474 to re-activate or resolve subscription issues.

51

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

HEATER ONLY SYSTEM (IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of air circulated in the vehicle. 2. Temperature selection: Controls the temperature of the airflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control. : Distributes outside air through the instrument panel vents.

OFF: Outside air is shut out and the fan will not operate.

: Distributes outside air through the instrument panel vents and the

floor vents.

: Distributes outside air through the floor vents. : Distributes outside air through the windshield defroster vents and

floor vents.

: Distributes outside air through the windshield defroster vents.

position.

the air flow selector in the

Operating tips • To reduce fog build up on the windshield during humid weather, place • To reduce humidity build up inside the vehicle during cold or warm weather, do not drive with the air flow selector in the OFF position. • Under normal weather conditions, do not leave the air flow selector in OFF when the vehicle is parked. This allows the vehicle to “breathe” using the outside air inlet vents. • Do not put objects under the front seats that will interfere with the air • Remove any snow, ice or leaves from the air intake area at the base of

flow to the back seats.

the windshield.

52

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

To aid in side window defogging/demisting in cold weather: 1. Select 2. Adjust the temperature control to maintain comfort. 3. Set the fan speed to the highest setting. 4. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel.

Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

MANUAL HEATING AND AIR CONDITIONING SYSTEM (IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of air circulated in the vehicle. 2. Temperature selection: Controls the temperature of the airflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control. MAX A/C: Uses recirculated air to cool the vehicle. Air flows from the instrument panel vents only. Temperature of airflow not adjustable. A/C: Uses outside air to cool the vehicle. Air flows from the instrument panel vents only.

: Distributes outside air through the instrument panel vents.

OFF: Outside air is shut out and the fan will not operate.

: Distributes outside air through the instrument panel vents and the

floor vents.

: Distributes outside air through the floor vents. : Distributes outside air through the windshield defroster vents and

floor vents.

: Distributes outside air through the windshield defroster vents.

53

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

position.

the air flow selector in the

air flow selector in the OFF position.

Operating tips • To reduce fog build up on the windshield during humid weather, place • To reduce humidity build up inside the vehicle: do not drive with the • Under normal weather conditions, do not leave the air flow selector in MAX A/C or OFF when the vehicle is parked. This allows the vehicle to “breathe” using the outside air inlet vents. • Do not put objects under the front seats that will interfere with the • Remove any snow, ice or leaves from the air intake area at the base of

airflow to the back seats.

the windshield.

To aid in side window defogging/demisting in cold weather: 1. Select 2. Adjust the temperature control to maintain comfort. 3. Set the highest fan speed. 4. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel.

Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

54

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps.

Turns the headlamps on.

or

Foglamp control (if equipped) The foglamps can be turned on when the headlamp control is in position and the the high beams are not turned on. Pull headlamp control towards you to turn foglamps on. The foglamp indicator light control and in the instrument cluster will illuminate.

on the headlamp

High beams Push the lever toward the instrument panel to activate. Pull the lever towards you to deactivate.

55

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

Flash to pass Pull toward you slightly to activate and release to deactivate.

Daytime running lamps (DRL) (if equipped) The daytime running light system turns the headlamps on, with a reduced light output. To activate: • the ignition must be in the ON position and • the headlamp system is in the OFF position or parking lamp position. Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Light (DRL) System

does not activate your tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision.

PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel and all applicable switches in the vehicle during headlamp and parklamp operation. Move the control up or down to adjust the intensity of the panel lighting. Move the control to the full upright position, past detent, to turn on the interior lamps.

56

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed before leaving the assembly plant. If your vehicle is involved in an accident or if you have problems fixing the alignment of your headlamps, have them checked by a qualified service technician.

ground

Headlamp aim adjustment The headlamps are designed to be mechanically aimed, but can also be aimed visually by doing the following: 1. Park your vehicle on a level surface about 25 feet (7.6 meters) away from a vertical plain surface (3). Check your headlamp alignment at night or in a dark area so that you can see the headlamp beam pattern. • (1) 8 feet (2.4 meters) • (2) Center height of lamp to • (3) 25 feet (7.6 meters) • (4) Horizontal reference line • (5) Center of headlamps • (6) Center line of the vehicle 2. The center of the headlamp is marked either on the lens (a circle or cross marker) or on the bulb shield, internal to the lamp (mark or feature). Measure the height from the center of your headlamp to the ground (2) and mark an 8 foot (2.4 meter) long horizontal line on the wall or screen (1) at this height (masking tape works well). 3. Turn on the low beam headlamps and open the hood. 4. Locate the high intensity area of the beam pattern and place the top edge of the intensity zone even with the horizontal reference line (4). If the top edge of the high intensity area is not even with the horizontal line, follow the next step to adjust it.

57

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

5. Locate the vertical adjuster for each headlamp. Adjust the aim by turning the adjuster control either clockwise (to adjust down) or counterclockwise (to adjust up). 6. In addition to the horizontal line marked in step 2, a pair of vertical lines (5) must be marked at the center line of the headlamps on the wall or screen. 7. On the wall or screen, locate the high intensity area of the beam pattern. The left edge of the high intensity area should be even with the vertical line corresponding to the headlamp under adjustment. If the left edge of the high intensity area is not even with the vertical line, follow the next step to adjust it. 8. Locate the horizontal adjuster for each headlamp. Turn it clockwise or counterclockwise, to place the left edge of the high intensity area even with the vertical line corresponding to the headlamp under adjustment.

TURN SIGNAL CONTROL • Push down to activate the left • Push up to activate the right turn

turn signal.

signal.

58

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

INTERIOR LAMPS

Lights

Courtesy/reading lamps (if equipped) The courtesy lamp lights when: • any door is opened. • the instrument panel dimmer

switch is held up until the courtesy lamps come on.

• the remote entry controls are

pressed and the ignition is OFF.

BULB REPLACEMENT

Headlamp Condensation The headlamps are vented to equalize pressure. When moist air enters the headlamp(s) through the vents, there is a possibility that condensation can occur. This condensation is normal and will clear within 45 minutes of headlamp operation.

Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time. Function Park/turn (front) Side marker lamps Headlamps Fog lamps (if equipped) Hi-mount brake lamp Rear stop/turn/tail lamps Rear turn (STX only)

Trade number 3157 A (amber)

9145 or H11 (STX)

Number of bulbs

4157K or 3157K

194 NA

3156

9007

922

59

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

Trade number

194

Number of bulbs

Function Rear license plate lamps Backup lamps Dome lamp Map/dome-SuperCab (if equipped) Map/dome-Regular Cab (if equipped) All replacement bulbs are clear in color except where noted. To replace all instrument panel lights - see your authorized dealer.

904

904

912

3155 or 3156 (STX)

Replacing the interior bulbs Check the operation of all bulbs frequently.

Replacing exterior bulbs Check the operation of all the bulbs frequently. Replacing headlamp bulbs/front park bulbs/turn signal bulbs To remove the bulb(s): 1. Make sure the headlamp switch is in the OFF position, then open the hood. 2. At the back of the headlamp, pry up the two retainer pins to release the headlamp assembly from the vehicle and pull headlamp forward.

3. Disconnect the electrical connector from the bulb by pulling rearward.

60

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

4. Remove the bulb retaining ring by rotating it counterclockwise and slide the ring off the plastic base.

5. Remove the old bulb by pulling it straight out of the lamp.

Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.

Install the new bulb(s) in reverse order. Replacing front sidemarker bulbs 1. Turn the headlamp switch to the OFF position and then open the hood. 2. At the back of the headlamp, pry up the two retainer pins to release the headlamp assembly from the vehicle and pull headlamp forward.

61

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

3. Remove screw(s) from lamp assembly and disengage lamp assembly (it has a snap fit).

4. Rotate bulb socket counterclockwise and remove from lamp assembly. 5. Carefully pull bulb straight out of socket and push in the new bulb. 6. Install the bulb socket in lamp assembly by turning clockwise.

Install the new bulb in reverse order.

62

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

Replacing tail lamp/backup lamp bulbs 1. Make sure the headlamp switch is in the OFF position and the open the tailgate to expose the lamp assemblies. 2. Remove the four screws and the lamp assembly from vehicle.

3. Rotate bulb socket counterclockwise turn and remove from lamp assembly. 4. Carefully pull the bulb straight out of the socket

Install the new bulb(s) in reverse order.

63

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Lights

Replacing foglamp bulbs (if equipped) 1. Make sure the headlamp switch is in the OFF position and remove the bulb socket from the foglamp by turning counterclockwise. 2. Disconnect the electrical connector.

Install the new bulb in reverse order. Replacing high-mount brakelamp bulb 1. Make sure the headlamp switch is in the OFF position and remove the two screws and lamp assembly from vehicle. 2. Remove the bulb socket from lamp assembly by rotating it counterclockwise. 3. Carefully pull bulb straight out of socket. Install the new bulb in reverse order. Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the OFF position and reach behind the rear bumper to locate the bulb socket. 2. Twist the socket counterclockwise and remove. 3. Carefully pull the bulb straight out of the socket.

Install the new bulb(s) in reverse order.

64

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you to increase the speed of the wipers (from desired interval to low or high speed position); rotate towards you to decrease the speed of the wipers.

Windshield washer: Push the end of the stalk: • briefly: causes a single swipe of the wipers without washer fluid. • a quick push and hold: the wipers

will swipe three times with washer fluid.

• a long push and hold: the wipers and washer fluid will be activated for up to ten seconds.

Note: Do not operate the washer when the washer reservoir is empty. This may cause the washer pump to overheat. Check the washer fluid level frequently. Do not operate the wipers when the windshield is dry. This may scratch the glass, damage the wiper blades and cause the wiper motor to burn out. Before operating the wiper on a dry windshield, always use the windshield washer. In freezing weather, be sure the wiper blades are not frozen to the windshield before operating the wipers.

65

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

TILT STEERING WHEEL (IF EQUIPPED) To adjust the steering wheel: 1. Pull and hold the steering wheel release control toward you. 2. Move the steering wheel up or down until you find the desired location. 3. Release the steering wheel release control. This will lock the steering wheel in position.

Never adjust the steering wheel when the vehicle is moving.

CENTER CONSOLE (IF EQUIPPED) Your vehicle may be equipped with a variety of console features. These include: • Utility compartment with • Cupholders • Flip up armrest

cassette/compact disc storage

Use only soft cups in the cupholder. Hard objects can

injure you in a collision.

AUXILIARY POWER POINT (12VDC) Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty.

66

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

The auxiliary power points are located on the instrument panel. Do not use the power point for operating the cigarette lighter element (if equipped). To prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of 12 VDC/180W. Refer to Passenger Compartment Fuse Panel in the Roadside Emergencies chapter for fuse ratings in your vehicle. To prevent the battery from being discharged, do not use the power point longer than necessary when the engine is not running. Always keep the power point caps closed when not being used. Cigar/Cigarette lighter (if equipped) Do not plug optional electrical accessories into the cigarette lighter socket. Do not hold the lighter in with your hand while it is heating, this will damage the lighter element and socket. The lighter will be released from its heating position when it is ready to be used. Improper use of the lighter can cause damage not covered by your warranty.

POWER WINDOWS (IF EQUIPPED)

Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure

themselves.

When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in

the proximity of the window openings.

Press and hold the bottom part of the rocker switch to open the window. Press and hold the top part of the rocker switch to close the window.

67

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

One touch down Allows the driver’s window to open fully without holding the control down. Press completely down on AUTO and release quickly. Press again to stop.

EXTERIOR MIRRORS

to adjust the left to adjust the right

Power side view mirrors (if equipped) To adjust your mirrors: 1. Select mirror or mirror. 2. Move the control in the direction you wish to tilt the mirror. 3. Return to the center position to lock mirrors in place.

Fold-away mirrors Pull the side mirrors in carefully when driving through a narrow space, like an automatic car wash.

SPEED CONTROL (IF EQUIPPED) With speed control set, you can maintain a set speed without keeping your foot on the accelerator pedal.

Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved.

68

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Setting speed control The controls for using your speed control are located on the steering wheel for your convenience. 1. Press the ON control and release it. 2. Accelerate to the desired speed.

on the

3. Press the SET + control and release it. 4. Take your foot off the accelerator pedal. 5. The indicator light instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a • If the vehicle speed increases above the set speed on a downhill, you • If the vehicle speed decreases more than 10 mph (16 km/h) below • If the vehicle speed decreases to 30 mph (48 km/h) or less, your

your set speed on an uphill, your speed control will disengage.

may want to apply the brakes to reduce the speed.

steep hill.

speed control will disengage

Disengaging speed control To disengage the speed control: • Depress the brake pedal or • Depress the clutch pedal (if equipped). Disengaging the speed control will not erase previous set speed. Note: When you use the clutch pedal to disengage the speed control, the engine speed may briefly increase, this is normal.

69

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Resuming a set speed Press the RES (resume) control and release it. This will automatically return the vehicle to the previously set speed.

Increasing speed while using speed control There are three ways to set a higher speed: • Press and hold the SET + control until you get to the desired speed, then release the control. • Press and release the SET + control to operate the Tap-Up function. Each tap will increase the set speed by 1 mph (1.6 km/h).

• Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control There are three ways to reduce a set speed: • Press and hold the CST - control until you get to the desired speed, then release the control. • Press and release the CST -

control to operate the Tap-Down function. Each tap will decrease the set speed by 1 mph (1.6 km/h). • Depress the brake pedal or the clutch pedal (if equipped) until the desired vehicle speed is reached, press the SET + control.

70

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Turning off speed control There are two ways to turn off the speed control: • Press the speed control OFF • Turn OFF the ignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased.

control.

CARGO AREA FEATURES

Cargo area shade (if equipped) Your vehicle may be equipped with notches in the side trim panels that are used for a cargo area shade. See your authorized dealer for more information.

BEDRAILS (IF EQUIPPED) • This bedrail is for appearance use only.

To help prevent injury, do not use bedrail to retain cargo.

• Retain cargo with the pickup tiedown hooks.

BED EXTENDER (IF EQUIPPED) Your vehicle may be equipped with a bed extender designed to extend the pickup box for larger loads. To extend the bed extender: 1. Lower tailgate. 2. Pull the lever on each side of the bed extender to release it from the pickup box. 3. Lift the bed extender over onto the tailgate.

71

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

4. Evenly push down on the bed extender and push the lever in on each side locking it in place. To stow the bed extender, follow steps one through four in reverse order. The bed extender may be used to secure a load of up to 100 lb. (46
kg) on the tailgate. The bed extender should always be kept in the stowed position with the tailgate closed when not in use. Activating bed extender Theft Deterrent Device: The following procedure can be done with the bed extender in the stowed or extended position. 1. Locate the Phillips head screw in the middle of the vertical brace in front of the locking clip. 2. Turn the screw counterclockwise until you hear an audible click. 3. To deactivate, turn the screw clockwise until the locking clip moves freely. To remove the bed extender: 1. Extend the bed extender. 2. Pull the lever on each side of the bed extender to unlock it. Make sure the locking clip screws are loose before removing the bed extender. 3. Press the locking clips below the middle bar and lift the bed extender out of the channels on the “D” pillar. To install the bed extender, follow the removal procedure in reverse order.

72

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Locks and Security

KEYS The key operates all locks on your vehicle. You should always carry a second key with you in a safe place in case you require it in an emergency. If your vehicle is equipped with the SecuriLock娂 Passive Anti-theft system, your keys are coded to your vehicle; using a non-coded key will not permit your vehicle to start. If you lose your dealer supplied keys, replacement keys are available through your authorized dealer.

POWER DOOR LOCKS (IF EQUIPPED) Press the top of the control to unlock all doors and the bottom to lock all doors.

UNLOCK

LOCK

REMOTE ENTRY SYSTEM (IF EQUIPPED) This device complies with part 15 of the FCC rules and with RS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The typical operating range for your remote entry transmitter is approximately 33 feet (10 meters). A decrease in operating range could be caused by: • weather conditions, • nearby radio towers, • structures around the vehicle, or • other vehicles parked next to your vehicle.

73

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Locks and Security

a key.

Your vehicle is equipped with a remote entry system which allows you to: • unlock the vehicle doors without • lock all the vehicle doors without • activate the personal alarm.

a key.

• If

and release to unlock the driver’s door. Note: The interior

If there are problems with the remote entry system, make sure to take ALL remote entry transmitters with you to your authorized dealer in order to aid in troubleshooting the problem. Unlocking the doors 1. Press lamps will illuminate. 2. Press doors. Locking the doors • Press

and release to lock all the doors. The park lamps will flash once to confirm lock; if any of the doors are not properly closed, the lamps will not flash.

and release again within three seconds to unlock all the

is pressed a second time within three seconds, the lamps will

flash again and the horn will chirp to confirm all doors are locked and closed. If either door is ajar the lamps will not flash and the horn will chirp twice.

Sounding a panic alarm Press to activate the alarm. The horn will sound and the parklamps will flash for approximately 3 minutes. Press again or turn the ignition to the 4 (ON) position to deactivate, or wait for the alarm to timeout in 3
minutes. Note: The panic alarm will only operate when the ignition is in the 2
(LOCK) or 3 (OFF) position. Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent.

74

2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus)

Locks and Security

To replace the battery: 1. Twist a thin coin between the two halves of the remote entry transmitter near the key ring. DO NOT TAKE THE RUBBER COVER