2013 Chevrolet Camaro Owners Manual

does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release.

The Universal Remote system should now activate the garage door.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (49,1)

If you live in Canada, or you are having difficulty programming a gate operator or garage door opener by using the “Programming the Universal Remote System” procedures, regardless of where you live, replace Step 2 under “Programming the Universal Remote System” with the following: Continue to press and hold the Universal Remote system button while you press and release every two seconds (cycle) the hand-held transmitter button until the frequency signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.

Instruments and Controls

5-49

Universal Remote System Operation

Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons All programmed buttons should be erased when the vehicle is sold or the lease ends. To erase all programmed buttons on the Universal Remote system device: 1. Press and hold down the two

outside buttons until the indicator light begins to flash. This should take about 10 seconds.

2. Release both buttons.

Reprogramming a Single Universal Remote System Button To reprogram any of the three Universal Remote system buttons: 1. Press and hold the desired

Universal Remote system button. Do not release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.” If you have questions or need help programming the Universal Remote system, call 1-800-355-3515 or go to www.homelink.com. You may also call the customer assistance phone number under Customer Assistance Offices (U.S. and Canada) on page 13‑5 or Customer Assistance Offices (Mexico) on page 13‑5.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (50,1)

5-50

Instruments and Controls

2 NOTES

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (1,1)

Lighting

Exterior Lighting

Exterior Lighting

Exterior Lamp Controls

Exterior Lamp Controls . . . . . . . . 6-1
Headlamp High/Low-Beam

Changer . . . . . . . . . . . . . . . . . . . . . 6-2
Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2
Daytime Running

Lamps (DRL) . . . . . . . . . . . . . . . . 6-2

Automatic Headlamp

System . . . . . . . . . . . . . . . . . . . . . . 6-3
Hazard Warning Flashers . . . . . 6-4
Turn and Lane-Change

Signals . . . . . . . . . . . . . . . . . . . . . . 6-4
Front Fog Lamps . . . . . . . . . . . . . . 6-5

Interior Lighting

Instrument Panel Illumination

Control . . . . . . . . . . . . . . . . . . . . . . 6-5
Dome Lamps . . . . . . . . . . . . . . . . . 6-6

Lighting Features

Entry Lighting . . . . . . . . . . . . . . . . . 6-6
Theater Dimming . . . . . . . . . . . . . . 6-6
Battery Load Management . . . . 6-6
Battery Power Protection . . . . . . 6-7

The exterior lamp control is on the instrument panel, on the outboard side of the steering wheel. There are four positions: P (Off): Briefly turn to this position to turn the automatic light control off or on again. When released, the control returns to the AUTO position.

Lighting

6-1

AUTO (Automatic): Turns the headlamps on automatically at normal brightness, together with the following: . Parking Lamps

Taillamps

. Sidemarker Lamps

License Plate Lamps Instrument Panel Lights

AUTO also controls the Daytime Running Lamps (DRL). See Daytime Running Lamps (DRL) on page 6‑2. ; (Parking Lamps): Turns the parking lamps on together with the following:

Taillamps

. Sidemarker Lamps

License Plate Lamps Instrument Panel Lights

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (2,1)

6-2

Lighting

A warning chime sounds if the driver door is opened when the ignition switch is off and the parking lamps are on. 5 (Headlamps): Turns the headlamps on together with the lamps listed below. . Parking Lamps

Taillamps

. Sidemarker Lamps

License Plate Lamps Instrument Panel Lights

A warning chime sounds if the driver door is opened when the ignition switch is off and the headlamps are on. # (Front Fog Lamps): Turns the fog lamps on or off. The fog lamps come on together with the following: . Parking Lamps

Taillamps

. Sidemarker Lamps

License Plate Lamps

Instrument Panel Lights

See Front Fog Lamps on page 6‑5.

Headlamp High/ Low-Beam Changer Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.

This indicator light turns on in the instrument cluster when the high-beam headlamps are on.

Flash-to-Pass The flash‐to‐pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal/lane change lever all the way toward you, then release it.

Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional Daytime Running Lamps are required on all vehicles first sold in Canada. A light sensor on top of the instrument panel makes the DRL work, so be sure it is not covered.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (3,1)

The DRL system will make the low-beam headlamps come on at a reduced brightness or for vehicles with High Intensity Discharge (HID) headlamps, the dedicated DRL lights will come on when the following conditions are met:

The ignition is in the ON/RUN position. The exterior lamps control is in AUTO, or has been briefly turned to P to turn the automatic light control on again. The engine is running. When the DRL are on, the headlamps, taillamps, sidemarker lamps, instrument panel lights, and other lamps will not be on. The headlamps automatically change from DRL to the regular headlamps depending on the darkness of the surroundings. The other lamps that come on with the headlamps will also come on.

When it is bright enough outside, the headlamps will go off and the DRL will come on. To turn the DRL off or on again, turn the exterior lamps control to the P position and then release. For vehicles first sold in Canada, the DRL cannot be turned off. The regular headlamp system should be turned on when needed.

Automatic Headlamp System When it is dark enough outside and the headlamp switch is in AUTO, the automatic headlamp system will turn on the headlamps at the normal brightness along with other lamps such as the taillamps, sidemarker lamps, parking lamps, license plate lamps, and the instrument panel lights. The radio lights will also be dim. To turn off the automatic headlamp system, turn the exterior lamps switch to the P position and then

Lighting

6-3

release. For vehicles first sold in Canada, the transmission must be in the P (Park) position, before the automatic headlamp system can be turned off.

The vehicle has a light sensor on the top of the instrument panel. Do not cover this sensor or the system will come on whenever the ignition is on. The system may also turn on the headlamps when driving through a parking garage, heavy overcast weather, or a tunnel. This is normal. There is a delay in the transition between the daytime and nighttime operation of the Daytime Running Lamps (DRL) and the automatic

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (4,1)

6-4

Lighting

headlamp system so that driving under bridges or bright overhead street lights does not affect the system. The DRL and automatic headlamp system will only be affected when the light sensor sees a change in lighting lasting longer than the delay. If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. If it is light outside when the vehicle leaves the garage, there will be a slight delay before the automatic headlamp system changes to the DRL. During that delay, the instrument cluster may not be as bright as usual. Make sure the instrument panel brightness control is in the full bright position. See Instrument Panel Illumination Control on page 6‑5. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking

Turn and Lane-Change Signals

lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to P or ; to disable this feature.

Hazard Warning Flashers

An arrow on the instrument cluster flashes in the direction of the turn or lane change. Move the lever all the way up or down to signal a turn. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. If the lever is briefly pressed and released, the turn signal flashes three times. The lever returns to its starting position whenever it is released.

| (Hazard Warning Flasher): Press this button to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press again to turn the flashers off.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (5,1)

If after signaling a turn or lane change the arrow flashes rapidly or does not come on, a signal bulb might be burned out. Have any burned out bulbs replaced. If the bulb is not burned out, check the fuse. See Electrical System Overload on page 10‑41.

Front Fog Lamps

For vehicles with front fog lamps, the button is on the exterior lamp control, on the outboard side of the steering wheel. The ignition must be turned to ON/ RUN to turn on the fog lamps.

# (Front Fog Lamps): Press to turn the fog lamps on or off. An indicator light on the instrument cluster comes on when the fog lamps are on. The fog lamps come on together with the parking and sidemarker lamps. If the high-beam headlamps are turned on, the fog lamps will turn off. If the high-beam headlamps are turned off, the fog lamps will turn back on again. For vehicles with High Intensity Discharge (HID) headlamps, the Daytime Running Lamps (DRL) replace the fog lamps. Some localities have laws that require the headlamps to be on along with the fog lamps.

Lighting

6-5

Interior Lighting

Instrument Panel Illumination Control

This feature controls the brightness of the instrument panel lights. D (Instrument Panel Brightness): Move the thumbwheel up or down and hold, to brighten or dim the instrument panel lights.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (6,1)

6-6

Lighting

Dome Lamps

The dome lamp buttons are overhead near the rearview mirror. To change the settings, press the following: ( (Off): Turns the lamp off, even when a door is open. H (Door): Turns the lamp on automatically when a door is opened. ' (On): Turns the lamp on.

Lighting Features

Entry Lighting The lamps inside the vehicle come on when any door is opened. They stay on for about 20 seconds. When all of the doors have been closed or the ignition is turned to ON/RUN, they gradually fade out. They also come on when K is pressed on the Remote Keyless Entry (RKE) system transmitter. The lamps inside the vehicle stay on for about 20 seconds after the key is removed from the ignition to provide light as you exit.

Theater Dimming This feature allows for a three to five second fade out of the courtesy lamps instead of having them turn off immediately.

Battery Load Management The vehicle has Electric Power Management (EPM) that estimates the battery's temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery. When the battery's state of charge is low, the voltage is raised slightly to quickly bring the charge back up. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gauge or a voltage display on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert will be displayed. The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be spinning fast

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (7,1)

Lighting

6-7

recommended that the driver reduce the electrical loads as much as possible. See Battery Voltage and Charging Messages on page 5‑33.

Battery Power Protection This feature shuts off the dome lamp if it is left on for more than 10 minutes when the ignition is in LOCK/OFF. This helps to prevent the battery from running down.

enough at idle to produce all of the power needed for very high electrical loads. A high electrical load occurs when several of the following are on, such as: headlamps, high beams, fog lamps, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets. EPM works to prevent excessive discharge of the battery. It does this by balancing the generator's output and the vehicle's electrical needs. It can increase engine idle speed to generate more power whenever needed. It can temporarily reduce the power demands of some accessories. Normally, these actions occur in steps or levels, without being noticeable. In rare cases at the highest levels of corrective action, this action may be noticeable to the driver. If so, a DIC message might be displayed, and it is

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (8,1)

6-8

Lighting

2 NOTES

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (1,1)

Phone

Bluetooth (Overview) . . . . . . . . 7-21
Bluetooth (Infotainment

Controls) . . . . . . . . . . . . . . . . . . . 7-22

Bluetooth (Voice

Recognition) . . . . . . . . . . . . . . . 7-26

Infotainment System

Introduction

Infotainment . . . . . . . . . . . . . . . . . . . 7-1
Theft-Deterrent Feature . . . . . . . 7-2
Overview . . . . . . . . . . . . . . . . . . . . . . 7-3
Operation . . . . . . . . . . . . . . . . . . . . . 7-4

Radio

AM-FM Radio . . . . . . . . . . . . . . . . . 7-8
Satellite Radio . . . . . . . . . . . . . . . . 7-9
Radio Reception . . . . . . . . . . . . . 7-12
Fixed Mast Antenna . . . . . . . . . 7-13
Backglass Antenna . . . . . . . . . . 7-13
Diversity Antenna System . . . 7-13
Satellite Radio Antenna . . . . . . 7-13

Audio Players

CD Player . . . . . . . . . . . . . . . . . . . 7-14
Auxiliary Devices . . . . . . . . . . . . 7-16

Infotainment System 7-1

Introduction

Infotainment Read the following pages to become familiar with the infotainment system features.

{ WARNING

Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others. Do not give extended attention to infotainment tasks while driving.

This system provides access to many audio and non-audio listings. To minimize taking your eyes off the road while driving, do the following while the vehicle is parked: . Become familiar with the

operation and controls of the audio system.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (2,1)

information on settings and downloadable applications (if equipped).

Theft-Deterrent Feature The theft-deterrent feature works by learning a portion of the Vehicle Identification Number (VIN) to the infotainment system. The infotainment system does not operate if it is stolen or moved to a different vehicle.

7-2

Infotainment System

. Set up the tone, speaker

adjustments, and preset radio stations.

See Defensive Driving on page 9‑3. Notice: Contact your dealer before adding any equipment. Adding audio or communication equipment could interfere with the operation of the engine, radio, or other systems, and could damage them. Follow federal rules covering mobile radio and telephone equipment. The vehicle has Retained Accessory Power (RAP). With RAP, the infotainment system can play even after the ignition is turned off. See Retained Accessory Power (RAP) on page 9‑21. The vehicle may have a base radio that is included in this manual. See the separate infotainment manual for information on the connective radio and navigation system, audio players, phone, and voice recognition. There is also

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (3,1)

Overview

1. VOL/ O

2.

INFO

Press: Turns the system on or off. Turn: Adjusts the volume.

Radio: Shows available information about the current station. CD/MP3: Shows available information about the current track.

Infotainment System 7-3

3. Buttons 1−6

Radio: Saves and selects favorite stations.

4. FAV

Radio: Opens the favorites list.

5. MENU/SELECT

Press: Opens the menus and selects menu items. Turn: Highlights menu items or sets values while in a menu. Manually selects radio stations while listening to the radio.

6. RADIO/BAND

Changes the band while listening to the radio. Selects the radio when listening to a different audio source. 7. X (CD Eject)

Removes the CD from the slot.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (4,1)

7-4

Infotainment System

8. CD/AUX

13. CONFIG

Selects between the CD player or a connected external audio source.

9. PHONE

Opens the phone main menu. Mutes the audio system.

10. SEEK 7

Radio: Seeks the previous station. CD: Selects the previous track or rewinds within a track.

11. CD Slot

Insert a CD.

12. SEEK 6

Radio: Seeks the next station. CD: Selects the next track or fast forwards within a track.

Opens the Configuration Settings menu.

14. TONE

Opens the Tone Settings menu.

15. BACK /

Menu: Moves one level back. Character Input: Deletes the last character.

Operation

Controls The infotainment system is operated by using the pushbuttons, multifunction knobs, and menus that are shown on the display, and steering wheel controls, if equipped. Turning the System On or Off VOL/ O (Volume/Power): Press to turn the system on and off.

Automatic Off If the infotainment system has been turned on after the ignition is turned off, the system turns off automatically after 10 minutes. Volume Control VOL/ O (Volume/Power): Turn to adjust the volume. PHONE: For vehicles with OnStar®, press and hold PHONE to mute the infotainment system. Press and hold PHONE again, or turn VOL/O to cancel mute. For vehicles without OnStar, press PHONE to mute the infotainment system. Press PHONE again, or turn VOL/O to cancel mute. Menu System

Controls The MENU/SELECT knob and the BACK / button are used to navigate the menu system.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (5,1)

MENU/SELECT: Press to: . Enter the menu system. . Select or activate the highlighted

menu option.

. Confirm a set value. . Switch a system setting on

or off.

Turn to: . Highlight a menu option. . Select a value. BACK / : Press to: . Exit a menu. . Return from a submenu screen

to the previous menu screen. . Delete the last character in a

sequence.

Infotainment System 7-5

Selecting a Menu Option

Activating a Setting

1. Turn the MENU/SELECT knob to

1. Turn the MENU/SELECT knob to

move the highlighted bar.

highlight the setting.

2. Press the MENU/SELECT knob to select the highlighted option.

2. Press the MENU/SELECT knob

to activate the setting.

Submenus

Setting a Value

An arrow on the right-hand edge of the menu indicates that it has a submenu with other options.

1. Turn the MENU/SELECT knob to

change the current value of the setting.

2. Press the MENU/SELECT knob

to confirm the setting.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (6,1)

7-6

Infotainment System

Turning a Function On or Off

1. Turn the MENU/SELECT knob to

highlight the function.

2. Press the MENU/SELECT knob

to turn the function on or off.

Entering a Character Sequence

1. Turn the MENU/SELECT knob to

highlight the character.

2. Press the MENU/SELECT knob

to select the character.

Press the BACK / button to delete the last character or press and hold BACK / to delete the entire character sequence. Audio Settings The audio settings can be set for each radio band and each audio player source. To adjust the audio setting, press the TONE button and select the audio setting. Press the / BACK button to go back to the Tone Settings menu. To quickly reset an audio setting value to 0: 1. Highlight the option. 2. Press and hold the MENU/

SELECT knob until the value changes to 0.

Adjusting the Treble, Midrange, and Bass

1. Select Treble, Midrange,

or Bass.

2. Select the value.

Adjusting the Fader and Balance

1. Select Fader or Balance. 2. Select the value.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (7,1)

Adjusting the EQ (Equalizer) For vehicles that have an equalizer:

3. Select Radio Favorites. 4. Select the number of available

1. Select EQ. 2. Select the setting. System Settings

Configuring the Number of Favorite Pages

favorite pages.

5. Press the BACK / button to go

back to the System Configuration menu.

Auto Volume The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent. The level of volume compensation can be selected, or the auto volume feature can be turned off.

To configure the number of available favorite pages: 1. Press the CONFIG button. 2. Select Radio Settings.

1. Press the CONFIG button. 2. Select Radio Settings.

Infotainment System 7-7

3. Select Auto Volume. 4. Select the setting. 5. Press the BACK / button to go

back to the System Configuration menu.

Maximum Startup Volume The maximum volume played when the radio is first turned on can be set.

1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Maximum Startup

Volume.

4. Select the setting. 5. Press the BACK / button to go

back to the System Configuration menu.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (8,1)

7-8

Infotainment System

Radio

AM-FM Radio

Control Buttons The buttons used to control the radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM®, if equipped. SEEK 7 or SEEK 6 : Press to search for stations. FAV: Press to open the favorites list. 1−6: Press to select preset stations. MENU/SELECT: Turn to manually search for stations. RDS (Radio Data System) The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio

station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. While the radio is tuned to an FM-RDS station, the station name or call letters display. Radio Menus Radio menus are available for AM, FM, and SiriusXM, if equipped. Press the MENU/SELECT knob to open the main radio menu for that frequency. Selecting a Band Press the RADIO/BAND button to choose AM, FM, or SiriusXM, if equipped. The last station that was playing starts playing again.

Selecting a Station

Seek Tuning Briefly press SEEK 7 or SEEK 6
to automatically search for the next available station. If a station is not found, the radio switches to a more sensitive search level. If a station still is not found, the frequency that was last active begins to play. Press and hold SEEK 7 or SEEK 6 until the station on the display is reached, then release the button.

Manual Tuning Turn the MENU/SELECT knob to select the frequency on the display.

Favorites List 1. Press the MENU/SELECT knob. 2. Select Favorites List. 3. Select the station.

Station Lists 1. Press the MENU/SELECT knob.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (9,1)

2. Select AM or FM Station List. All receivable stations in the current reception area are displayed. If no station list has been created, an automatic station search is done.

3. Select the station.

Updating Station and Category Lists If stations stored in the station list can no longer be received: 1. Press the MENU/SELECT knob. 2. Select Update AM or FM Station List, if the stations stored in the station list are no longer received. A station search will be completed and the first station in the updated list will play.

To cancel the station search, press the MENU/SELECT knob.

Category Lists Most stations that broadcast an RDS program type (PTY) code specify the type of programming transmitted. Some stations change

the PTY code depending on the content. The system stores the RDS stations, sorted by program type, in the FM category list. To search for a programming type determined by station: 1. Select FM category list. A list of all programming types available displays.

2. Select the programming type. A list of stations that transmit programming of the selected type displays.

3. Select the station. The category lists are updated when the corresponding station lists are updated. Storing and Retrieving Favorites Stations from all bands can be stored in the favorite lists in any order.

Infotainment System 7-9

Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.

Storing a Station as a Favorite To store the station to a position in the list, press the corresponding numeric button 1−6 until the station can be heard again.

Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1−6 buttons to retrieve the station.

Satellite Radio Vehicles with an XM Satellite Radio tuner and a valid SiriusXM® Satellite Radio subscription can receive SiriusXM programming.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (10,1)

7-10

Infotainment System

SiriusXM Satellite Radio Service SiriusXM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM Satellite Radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. During your trial or when you subscribe, you will get unlimited access to SiriusXM Radio Online for when you are not in the vehicle. A service fee is required to receive the SiriusXM service. If SiriusXM service needs to be reactivated, the radio will display "No Subscription Please Renew" on channel XM1. For more information, contact SiriusXM at www.siriusxm.com or 1-866-635-2349 (U.S.), and www.xmradio.ca or 1-877-209-0079 (Canada).

Control Buttons The buttons used to control the SiriusXM radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM. SEEK 7 or SEEK 6 : Press to search for stations. FAV: Press to open the favorites list. 1−6: Press to select preset stations. MENU/SELECT: Turn to search for stations. Selecting the SiriusXM Band Press the RADIO/BAND button to choose between the AM, FM, and SiriusXM bands. The last station played in that band begins to play when that band is selected. SiriusXM Categories SiriusXM stations are organized in categories.

Removing or Adding Categories 1. Press the CONFIG button. 2. Select XM Categories. 3. Turn the MENU/SELECT knob to

highlight the category.

4. Press the MENU/SELECT knob to remove or add the category. Selecting an SiriusXM Station SiriusXM stations can be selected by using SEEK 7 or SEEK 6, the MENU/SELECT knob, or the menu system. To select an XM station using SEEK 7 or SEEK 6, do one of the following: . Press and release SEEK 7 or

SEEK 6 to go to the previous or next station.

. Press and hold SEEK 7 or

SEEK 6 to scroll through the previous or next stations until the station is reached.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (11,1)

To select an XM station using the MENU/SELECT knob: 1. Turn the MENU/SELECT knob to

highlight an XM station.

2. Press the MENU/SELECT knob to select the station, or leave the station highlighted.

To select a station using the menu: 1. Press the MENU/SELECT knob. 2. Select XM Stations List. 3. Select the station.

Selecting a Station by Category 1. Press the MENU/SELECT knob. 2. Select XM Category List. A list of

all programming types available displays.

3. Select the programming type. 4. Select the station. Storing and Retrieving Favorites Stations from all bands can be stored in any order in the favorite pages.

Infotainment System 7-11

Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.

Storing a Station as a Favorite To store the station to a position in the list, press and hold the corresponding 1−6 button until the station can be heard again.

Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1−6 buttons to retrieve the station. SiriusXM Messages XL (Explicit Language Channels): These channels, or any others, can be blocked by request, by calling 1-866-635-2349 (U.S.) and 1-877-209-0079 (Canada). XM Updating: The encryption code is being updated; no action is required.

Loading XM: The audio system is acquiring and processing audio and text data; no action is needed. Channel Off Air: This channel is not currently in service. Channel Unauth: This channel is blocked or cannot be received with the XM subscription package. Channel Unavail: This previously assigned channel is no longer assigned. No Artist Info: No artist information is available. No Title Info: No song title information is available. No CAT Info: No category information is available. No Information: No text or informational messages are available. No Subscription Please Renew: Sirius XM subscription needs to be reactivated. Contact Sirius XM at www.siriusxm.com or

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (12,1)

7-12

Infotainment System

1-866-635-2349 (U.S.), and www.xmradio.ca or 1-877-209-0079
(Canada). No XM Signal: The vehicle may be in a location that where the XM signal is being blocked. When the vehicle is moved, the signal should return. CAT Not Found: There are no channels available for the selected category. XM Theftlocked: The XM receiver in the vehicle may have been in another vehicle. XM receivers cannot be swapped between vehicles. If this message is received after having the vehicle serviced, check with your dealer. XM Radio ID: If tuned to channel 0, this message alternates with the XM Radio eight-digit radio ID label. This label is needed to activate the service.

If this

If this message is

Unknown: received when tuned to channel 0, there could be a receiver fault. Consult with your dealer. Check XM Receiver: message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer. XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer.

Radio Reception Frequency interference and static can occur during normal radio reception if items such as phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.

FM FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. Static can also occur when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio. SiriusXM® Satellite Radio Service SiriusXM Satellite Radio Service provides digital radio reception. Tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (13,1)

addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the SiriusXM signal for a period of time. Cell Phone Usage Cell phone usage, such as making or receiving phone calls, charging, or just having the phone on may cause static interference in the radio. Unplug the phone or turn it off if this happens.

Fixed Mast Antenna The fixed mast antenna can withstand most car washes without being damaged as long as it is securely attached to the base. If the mast becomes slightly bent, straighten it out by hand. If the mast is badly bent, replace it. Occasionally check to make sure the antenna is tightened to its base. If tightening is required, tighten by hand until fully seated plus one quarter turn.

Backglass Antenna The AM-FM antenna is integrated with the rear window defogger in the rear window. Do not scratch the inside surface or damage the lines in the glass. If the inside surface is damaged, it could interfere with radio reception. For proper radio reception, the antenna connector needs to be properly attached to the post on the glass. If attaching a cell phone antenna to the glass, attach it between the grid lines. Notice: Using a razor blade or sharp object to clear the inside rear window can damage the rear window antenna and/or the rear window defogger. Repairs would not be covered by the vehicle warranty. Do not clear the inside rear window with sharp objects. Notice: Do not apply aftermarket glass tinting with metallic film. The metallic film in some tinting materials will interfere with or distort the incoming radio

Infotainment System 7-13

reception. Any damage caused to the backglass antenna due to metallic tinting materials will not be covered by the vehicle warranty.

Diversity Antenna System For vehicles with convertible tops, the AM-FM antenna is a hidden self-tuning system, and is in the rear spoiler. It optimizes the AM and FM signals relative to the vehicle's position and radio station source. No maintenance or adjustments are needed. Do not place loads on the spoiler. If the spoiler is replaced, be sure it is replaced with the correct GM parts for the best AM and FM reception.

Satellite Radio Antenna For vehicles with XM Satellite Radio Service, the antenna is on the decklid of the vehicle. Keep the antenna clear of obstructions for clear radio reception.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (14,1)

7-14

Infotainment System

Audio Players

CD Player The CD player can play audio CDs and MP3 CDs. The CD player will not play 8 cm (3 in) CDs.

Care of CDs Sound quality can be reduced due to disc quality, recording method, quality of the music recorded, and how the disc has been handled. Handle discs carefully and store them in their original cases or other protective cases away from direct sunlight and dust. If the bottom surface of a disc is damaged, the disc may not play properly or at all. Do not touch the bottom surface of a disc while handling it; this could damage the surface. Pick up discs by grasping the outer edges or the edge of the hole and the outer edge. If the bottom surface of a disc is dirty, take a soft lint-free cloth, or dampen a clean soft cloth in a

mild neutral detergent solution mixed with water, and clean it. Wipe the disc from the center to the outer edge.

Care of the CD Player Do not add a label to a disc, as it could get caught in the CD player. If a label is needed, label the top of the recorded disc with a marking pen. Do not use disc lens cleaners because they could contaminate the lens of the disc optics and damage the CD player. Notice: If a label is added to a CD, more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged. While using the CD player, use only CDs in good condition without any label, load one CD at a time, and keep the CD player and the loading slot free of foreign materials, liquids, and debris.

Control Buttons The buttons used to control the CD player are: CD/AUX: Press to choose between the CD and AUX player. SEEK 7 or SEEK 6 : Press to select tracks or to fast forward or rewind within a track. MENU/SELECT: Turn to select tracks. INFO: Press to display additional information about the CD that may be available. X (Eject): Press to remove the CD. Inserting a CD With the printed side facing up, insert a disc into the CD slot until it is drawn in. Removing a CD Press X. The disc is pushed out of the CD slot.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (15,1)

If the disc is not removed after it is ejected, it is pulled back in after a few seconds. Playing a CD or MP3 CD Press the CD/AUX button if there is a disc in the player; it begins playing. Information about the disc and current track is shown on the display depending on the data stored.

Selecting a CD Track Using the control buttons: Press SEEK 7 or SEEK 6 to select the previous or next track. Turn the MENU/SELECT knob counterclockwise or clockwise to select the previous or next track. Using the CD Menu: 1. Press the MENU/SELECT knob. 2. Select Tracks list. 3. Select the track.

Playing Tracks in Random Order Press the MENU/SELECT knob and then set Shuffle Songs to On.

Fast Forward and Rewind Press and hold SEEK 7 or SEEK 6 to fast forward or rewind within the current track.

Selecting an MP3 Track Using the control buttons: Press SEEK 7 or SEEK 6 to select the previous or next track. Turn the MENU/SELECT knob counterclockwise or clockwise to select the previous or next track. Using the CD Menu: 1. Press the MENU/SELECT knob. 2. Select Playlists/Folders. 3. Select the playlist or folder. 4. Select the track.

Infotainment System 7-15

Searching for MP3 Tracks It is normal for the search feature to take some time to display the information after reading the disc due to the amount of information stored on the disc. The infotainment system automatically switches to FM while the disc is being read. Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres

Folder View

To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (16,1)

7-16

Infotainment System

Auxiliary Devices The AUX Input allows portable devices to connect to the vehicle using the 3.5 mm (1/8 in) input jack, the USB port, if equipped, or Bluetooth® wireless technology, if equipped. Portable devices are controlled by using the menu system described in Operation on page 7‑4.

The AUX input is in the center console.

3.5 mm Jack Connect a 3.5 mm (1/8 in) cable to the auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm jack can only be controlled using the controls on the device.

Adjusting the Volume Turn the VOL/ O knob to adjust the volume of the infotainment system after the volume level has been set on the portable audio device. USB Port For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system.

iPods

. PlaysForSure Devices (PFD) . USB Drives

Zunes

Connecting and Controlling an iPod® Not all iPods can be controlled by the infotainment system.

Connecting an iPod Connect the iPod to the USB port using the cable that came with the device.

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres . Audiobooks . Composers To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (17,1)

3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, Genres, Audiobooks, or Composers.

Connecting and Controlling a PlaysForSure Device (PFD) or Zune™

4. Select the track.

Shuffle Press the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off, then press the BACK / button to return to the main screen. On: Plays tracks in the current folder in random order. Off: Plays tracks in the current folder in sequential order.

Repeat Press the MENU/SELECT knob and set Repeat to On or Off, then press the BACK / button to return to the main screen. On: Repeats the current track. Off: Starts playback from the beginning of the current track after the last track finishes.

Connecting a PFD or Zune Connect the PFD or Zune to the USB port using the cable that came with the device.

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, or Genres

4. Select the track.

Infotainment System 7-17

Shuffle Functionality Press the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.

Repeat Functionality Press the MENU/SELECT knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Starts playback from the beginning of the current track after the last track finishes. Connecting and Controlling a USB Drive The infotainment system can only play back .mp3 and .wma files from a USB drive. Only the first 10,000 songs are recognized on the device.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (18,1)

7-18

Infotainment System

When a device is not supported, the message “No supported data found. You can safely disconnect the device” appears.

Connecting a USB Drive Connect the USB drive to the USB port using the cable that came with the device.

Searching for a Track It is normal for the search feature to take some time to display the information after reading the disc due to the amount of information stored on the disc. Files that do not have any meta data stored in the ID3 tag display as Unknown. Tracks can be searched for by: . Playlists* . Artists . Albums . Song Titles . Genres

Folder View

*This only displays if a playlist is found on the device. To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

Shuffle Functionality Press the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.

Repeat Functionality Press the MENU/SELECT knob and set Repeat to On or Off. Repeat On: Repeats the current track.

Repeat Off: Starts playback from the beginning of the current track after the last track finishes. Connecting a Bluetooth® Device Before a Bluetooth device can be connected to the infotainment system, it must first be paired to the system. Not all Bluetooth devices can be paired to the infotainment system. Before pairing the Bluetooth device, become familiar with its user guide for Bluetooth functions. The system only connects to Bluetooth devices that support A2DP (Advanced Audio Distribution Profile) version 1.2. Pairing Information: . Up to five devices can be paired

to the system. The pairing process is disabled when the vehicle is moving. The infotainment system automatically links with the first available paired device in the order the device was paired.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (19,1)

. Only one paired device can be connected to the infotainment system at a time.

. Pairing should only need to be

completed once, unless changes to the pairing information have been made or the device is deleted.

Bluetooth Setup Menu The Bluetooth Setup menu can be accessed with or without a device attached to the USB port. To select the Bluetooth Setup menu when a device is attached to the USB port and active: 1. Press the MENU/SELECT knob

while in the iPod, Zune, PFD, or USB device main menu.

2. Select Bluetooth Music Setup.

To select the Bluetooth Music Setup menu when a device is not attached to the USB port, or when a device is attached to the USB port but not active: 1. Press the CD/AUX button until

AUX is the active source.

2. Press the MENU/SELECT knob. 3. Select Bluetooth Music Setup. To select the Bluetooth Music Setup menu when a Bluetooth device is connected and active: 1. Press the MENU/SELECT knob. 2. Select Bluetooth Music Setup.

Pairing a Device 1. Select Connect To New Device

from the Bluetooth Music Setup menu.

2. The system asks a series of

Yes/No questions to determine what type of device is being paired.

Infotainment System 7-19

3. After the system determines

what type of Bluetooth device is being paired, the Bluetooth device will need to be put into discovery mode.

4. Some devices may require a

personal identification number (PIN) in order to complete the pairing process. Locate the device named “GMusicConnect” in the list on the Bluetooth device and follow the instructions on the device to enter the four-digit PIN provided by the infotainment system.

Connecting to a Device Once a device is paired to the infotainment system, it can be connected to the infotainment system. To connect a paired device when no other device is connected to the infotainment system: 1. Select the Select Device option

from the Bluetooth Music Setup menu.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (20,1)

7-20

Infotainment System

2. Select the new device. To connect a paired device when another device is connected to the infotainment system: 1. Select the Select Device option

from the Bluetooth Music Setup menu.

2. Select the new device. 3. The active device is

disconnected from the system and the new device is connected.

Removing a Device 1. Select Remove Device from the

Bluetooth Music Setup menu.

2. Select the device. 3. The device is removed from the

system.

Before connecting to the removed device again, it will need to paired to the infotainment system.

Changing the PIN To change the default PIN: 1. Select Change Default PIN from

the Bluetooth Music Setup menu.

2. Select a pre-defined PIN,

or select Other to create a PIN.

To create a PIN: 1. Select the length of the PIN. 2. Enter the character sequence.

Messages The following messages may appear on the infotainment screen. Poor Bluetooth Signal Quality: This message displays when the Bluetooth signal strength is low. This Feature is Unavailable While Vehicle is Moving: This message displays when an action is not allowed while the vehicle is moving.

Controlling a Bluetooth® Device Bluetooth devices that support AVRCP (Audio/Video Remote Control Profile) version 1.4 may be able to be controlled by the infotainment system. Press and release SEEK 7 or SEEK 6 to skip tracks. Press and hold SEEK 7 or SEEK 6 to fast forward or fast reverse within a track. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 13‑21 for Federal Communications Commission and Industry Canada information.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (21,1)

Phone

Bluetooth (Overview) For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: . Placement and receipt of calls in

a hands-free mode.

. Sharing of the cell phone’s

address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the

features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.

. Review the controls and

operation of the infotainment system.

. Pair cell phone(s) to the vehicle.

The system may not work with all cell phones. See “Pairing” in this section. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section.

. See “Storing and Deleting Phone

Numbers” in this section. { WARNING

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment (navigation) system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Infotainment System 7-21

Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The infotainment system and voice recognition are used to control the system. The system can be used while in ON/RUN or ACC/ ACCESSORY. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones. Bluetooth Controls Use the buttons on the infotainment system and the steering wheel to operate the Bluetooth system.

Steering Wheel Controls b / g (Push to Talk): Press to answer incoming calls, confirm system information, and start voice recognition.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (22,1)

7-22

Infotainment System

$ / i (Mute/End Call): Press to end a call, reject a call, or cancel an operation.

Infotainment System Controls If equipped, the infotainment system allows certain controls to be selected on the infotainment display. For information about how to navigate the menu system using the infotainment controls, see Operation on page 7‑4. PHONE: Press to enter the Phone main menu. Voice Recognition The voice recognition system uses commands to control the system and dial phone numbers. Noise: The system may not recognize voice commands if there is too much background noise. When to Speak: A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak.

How to Speak: Speak clearly in a calm and natural voice. Audio System When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the VOL/ O knob during a call to change the volume level. The adjusted volume level remains in memory for later calls. The system maintains a minimum volume level. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 13‑21 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.

Bluetooth (Infotainment Controls) For information about how to navigate the menu system using the infotainment controls, see Operation on page 7‑4. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if available. See OnStar Overview on page 14‑1.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be

paired to the Bluetooth system.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (23,1)

Infotainment System 7-23

The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Linking to a Different Phone” later in this section.

Pairing a Phone 1. Press the CONFIG button. 2. Select Phone Settings or

Bluetooth Settings.

3. Select Bluetooth.

4. Select Pair Device (Phone).

A four-digit Personal Identification Number (PIN) appears on the display. The PIN is used in Step 6.

5. Start the pairing process on the