2013 Cadillac Escalade Owners Manual

Back: Press to return to the previous screen. Map: If available, press to display the related traffic event on the map.

Traffic Event Screen

The detailed Traffic Event screens are used to display additional details of a traffic event condition. This screen may display if: . Scrolling to an event on the map

and then pressing INFO.

. Selecting a traffic event listed on

Map Traffic Event Icon with Back

the Traffic Event List screen.

The Traffic Event screen may display when approaching a traffic event.

Screen

More: Press to display more of the traffic event description, if the whole event does not fit in the given display.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (94,1)

7-94

Infotainment System

Avoid: This button is used to avoid the location of an event on the route. If pressed, a new route is calculated and the related traffic event is avoided. After the new route has been calculated, the navigation system goes to the full map screen and shows the new route. The Avoid button is only available if the event is on the route ahead.

Traffic Voice Prompts The traffic voice prompts are part of the current navigation voice prompts. If the navigation voice prompts are turned off, all traffic prompts are also turned off. If the voice prompts are on, whenever an Alert for Approaching Traffic is displayed, the system gives the related voice prompt. The content of the voice prompt depends on actual traffic event data. The RPT (Repeat) button is for navigation traffic maneuvers only. It is not used to repeat traffic

prompts. During a traffic voice prompt, if RPT is pressed, the current prompt playback cancels. Traffic prompts are disabled during OnStar (if equipped) or Voice Recognition activity. XM Weather (If Equipped) Press the Weather screen button to display the Current or Extended Forecast Weather.

The Extended Forecast Weather screen displays five days of the forecasted weather at the vehicle’s current position. Press the Location button located near the top leftside of the screen to change the current location to a new location from a list of 156 supported cities. The display will then update the extended forecast for the new chosen location. Press the Current Weather button located near the bottom leftside of the Extended Forecast Screen to display the current weather at the vehicle’s current position. Weather alerts will also be displayed in the Alerts nearby area. These alerts include Flash Flood Warning, Flood Warning, Special Marine Warning, Tornado Warning, and Thunderstorm Warning.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (95,1)

Infotainment System 7-95

Display

Brightness/Contrast/Mode

Alert Notification: Press the Alert Notification button located at the bottom rightside of the Current Weather screen turns on or off Weather alert pop-ups. The Weather Alert Pop-up, when turned on, will appear briefly in any audio source, providing alert notification during extreme weather warnings close to the vehicle’s current position.

Press CONFIG to enter the configure menu options, then press CONFIG repeatedly until Display is selected or press the Display screen button.

Display OFF Press this screen button to turn the display off. Press any control button to view the display.

Press this screen button to change the brightness, contrast, and mode of the display. ] (Brightness): Press + or − to increase or decrease the brightness of the screen. _ (Contrast): Press + or − to increase or decrease the contrast of the screen. Auto (Automatic): Press so the system can automatically adjust the screen background depending on exterior lighting conditions.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (96,1)

7-96

Infotainment System

Night: Press to make the map background darker. Day: Press to make the map background brighter.

For more information about the Rear Vision Camera, see Rear Vision Camera (RVC) on page 9‑47 in the vehicle owner manual.

Rear Vision Camera (If Equipped)

Rear Display(s)

Rear Camera Options: Press to display options available. The available options are: Video: Press to turn on or off. Symbols: Press to turn on or off. Guiding Lines: Press to turn on or off.

Press the Rear Display(s) screen button to allow the choice of sources for rear display between front disc, rear aux, or usb, if connected.

Setting the Clock The navigation system time and the analog clock operate independently. Changing the time through the navigation system does not change the time on the analog clock. See Clock on page 5‑7 to change the analog clock time. Press CONFIG to enter the configure menu options, then press CONFIG repeatedly until the time is selected or press the time screen button. Hours: Press − or + to decrease or increase the hours. Minutes: Press − or + to decrease or increase the minutes. 12/24 Format: Select the 12
screen button for standard time; select the 24 screen button for military time.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (97,1)

Global Positioning System (GPS) The navigation system determines the position of the vehicle by using satellite signals, various vehicle signals, and map data. At times, other interferences such as the satellite condition, road configuration, the condition of the vehicle and/or other circumstances can interfere with the navigation system's ability to determine the accurate position of the vehicle. The GPS shows the current position of the vehicle using signals sent by the GPS Satellites of the United States Department of Defense. When the vehicle is not receiving signals from the satellites, a symbol appears on the map screen. Refer to Global Positioning System (GPS) on page 7‑97.

This system may not be available or interferences may occur if any of the following are true: . Signals are obstructed by tall buildings, trees, large trucks, or a tunnel.

. Objects are located on the front

dash of the vehicle.

. Satellites are being repaired or

improved.

. After-market glass tinting has been applied to the vehicle's windshield.

Notice: Do not apply after-market glass tinting to the vehicle's windows. Glass tinting interferes with the system's ability to receive GPS signals and causes the system to malfunction. The window might have to be replaced to correct the problem. This would not be covered by the warranty.

Infotainment System 7-97

For more information if the GPS is not functioning properly, see Vehicle Positioning on page 7‑97 and Problems with Route Guidance on page 7‑98.

Vehicle Positioning At times, the position of the vehicle on the map may be inaccurate due to one or more of the following reasons: . Road system has changed. . Vehicle is driving on slippery

road surfaces such as in sand, gravel, and/or snow.

. Vehicle is traveling on winding

roads.

. Vehicle is on a long

straight road.

. Vehicle is approaching a tall

building or a large vehicle.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (98,1)

7-98

Infotainment System

. Surface streets run parallel to a

freeway.

First time the map DVD is inserted.

There is no route guidance when turning at an intersection.

. Vehicle has just been transferred

. Battery is disconnected for

. Plural names of places may be

by a vehicle carrier or a ferry.

several days.

. Current position calibration is set

. Vehicle is driving in heavy traffic

incorrectly.

. Vehicle is traveling at high

speed.

. Vehicle changes directions more than once, or when the vehicle is turning on a turn table in a parking lot.

. Vehicle is entering and/or exiting

a parking lot or a garage.

. GPS signal is not received. . Roof carrier is installed on the

vehicle.

. Vehicle is being driven with tire

chains. Tires are replaced. Tire pressure for the tires is incorrect. Tires are worn.

where driving is at low speeds, and the vehicle is stopped and started repeatedly.

See your dealer if other problems occur.

Problems with Route Guidance Inappropriate route guidance may occur under one or more of the following conditions: . You have not turned onto the

road indicated.

. Route guidance may not be

available when using automatic rerouting for the next right or left turn. The route may not be changed when using automatic rerouting.

announced occasionally. It may take a long time to operate automatic rerouting during high-speed driving.

. Automatic rerouting may display

a route returning to the set stopover if you are heading for a destination without passing through a set stopover. The route prohibits the entry of a vehicle due to a regulation by time or season or any other regulation which may be given.

. Some routes may not be

searched. The route to the destination may not be shown if there are new roads, if roads have recently changed, or if certain roads are not listed on the map DVD. See Database Coverage Explanations on page 7‑100

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (99,1)

To recalibrate the vehicle's position on the map, see your dealer.

If the System Needs Service If the navigation system needs service and the steps listed here have been followed but there are still problems, see your dealer for assistance.

Map Data Updates The navigation map database is stored on a compact flash card. It is usable only in this type of navigation system, and will not function in other electronic devices. The map in the vehicle was installed by the factory and is the most up-to-date information available as the vehicle was produced. This map may have to be updated periodically, provided that the map information has changed. See your dealer for service.

Ordering Map Data Updates The map database in the vehicle is the most up-to-date information available when the vehicle was produced. The map database is updated periodically, provided that the map information has changed.

United States and Canada For any questions about the system or the update process, contact the GM Nav Disc Center toll-free phone number, 1-877-NAV-DISC (1-877-628-3472) or go to the center's website, www.gmnavdisc.com. For any updates or replacements, call the GM Nav Disc Center or order the new database online. Have the Vehicle Identification Number (VIN) available when ordering to ensure the correct and most up-to-date map database for the vehicle is sent. See “Vehicle Identification Number (VIN)” in the index of the vehicle owner manual for more information.

Infotainment System 7-99

Mexico For any questions about the operation of the navigation system or the update process, contact General Motors of Mexico, Customer Care Center Cadillac toll-free phone number, 01-800-466-0805 or write to [email protected]. Have the Vehicle Identification Number (VIN) available when ordering to ensure the correct and most up-to-date DVD map disc for the vehicle is sent. See “Vehicle Identification Number (VIN)” in the Index of the vehicle owner manual for more information. After receiving the updated map database, see your dealer for replacement.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (100,1)

7-100

Infotainment System

Database Coverage Explanations Coverage area depends upon the map detail available. Some areas have greater map detail than others. The navigation system works only as well as the information provided on the stored map data. See Map Data Updates on page 7‑99 on how to obtain updated map information.

Voice Recognition The navigation system's voice recognition allows for hands-free operation of the navigation system, audio system, and OnStar (if equipped) features. Voice recognition can be used when the ignition is on or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 9‑26 for more information.

To use voice recognition:

1. Press and hold SRCE located on the steering wheel until you hear a beep. The audio system mutes.

2. Clearly state one of the commands listed on the following pages.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (101,1)

Helpful Hints for Stating Commands . When a multiple command is

available, choose the command that works best.

. Words that are in brackets are optional. For example, for the command Radio [band] [select] FM, stating Radio FM or Radio select FM are both valid commands.

. When the system recognizes the

command the system does one of the following: ‐ Perform the function. ‐ Ask you to confirm your

choice.

‐ Issue an error message “Did

not recognize. Voice Recognition Canceled.”

If you experience difficulty with the system recognizing a command, try saying it more softly, and wait for a few seconds after the beep, or repeat the command.

. Background noise may cause

voice commands to be misunderstood, including airflow noise from wind. To use the voice recognition system, the map DVD must be loaded and the navigation system must be on.

This system is able to recognize commands in three different languages. The system only recognizes commands based on the language selected from the Driver Information Center (DIC). See Driver Information Center (DIC) on page 5‑23 for more information.

Infotainment System 7-101

Voice Recognition Commands The following list shows all of the voice commands available for the navigation system with a brief description of each. The commands are listed with the optional words in brackets. To use the voice commands, refer to the instructions listed previously.

Voice Tag Commands The following are voice tag commands that can be accessed by clearly stating the commands exactly as they are written. There are up to 40 voice tag entries for destinations. Navigation go to [destination], navigation select: These commands instruct the system to select a destination saved under the voice tag you have stored. The system prompts for a destination name then waits for you to state the name.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (102,1)

7-102

Infotainment System

If not currently driving on a route, the system automatically creates the voice tag destination as the final destination. If driving on a route, the system automatically creates the voice tag destination as a stopover. Up to three stopovers can be created.

Storing Voice Tags From the address book entry information page, press the Add Voice tag screen button. The system responds “Name Please?” and you will have four seconds to record a name. The system asks for confirmation of the name before saving it as a voice tag.

Navigation Help This command instructs the system to assist with navigation commands.

Display Commands Use the following display commands to set the display mode. Display [set] day [mode]: Sets the display to daytime mode.

Display [set] night [mode]: Sets the display to night mode. Display [set] auto [mode]: Sets the display to automatic mode. The system changes between day and night mode automatically. System help: to assist with display commands.

Instructs the system

Radio Commands The following are radio commands that can be accessed by clearly stating the commands exactly as they are written. Radio [band] [select] AM, radio [band] [select] FM, radio [band] [select] XM (if equipped), radio [band] [select] satellite (if equipped): go to either the AM, FM, or XM (if equipped). Radio [select] (frequency) AM, radio [select] (frequency) FM: Instructs the system to go to a specific frequency on either AM or FM.

Instructs the system to

Radio [select] (channel) XM (if equipped), radio [select] (channel) satellite (if equipped): Instructs the system to go to a specific channel on the XM band (if equipped). Radio help: assist with radio commands.

Instructs the system to

CD Commands The following are CD, MP3, and DVD commands that can be accessed by clearly stating the commands exactly as they are written. CD, DVD, Disc: Use this command to select a CD, DVD, or disc that is currently loaded. CD, DVD, Disc, [select] track (one, two, three, etc.): Instructs the system to select a specific track number. CD, DVD, Disc select next folder: Use this command to select the next folder on the MP3 or audio DVD.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (103,1)

CD, DVD, Disc select previous folder: Use this command to select the previous folder on the MP3 or audio DVD. CD help, DVD help, Disc help: Instructs the system to assist with CD and DVD commands.

Auxiliary Commands The following auxiliary commands can be accessed by clearly stating the commands exactly as they are written. The commands are available when the auxiliary source is available. Aux, Auxiliary: Use this command to select the auxiliary device, when a device is connected.

Voice Help Provides a description of help commands that can be used.

Phone

Bluetooth For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: . Placement and receipt of calls in

a hands-free mode.

. Sharing of the cell phone’s

address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the

features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.

. Review the controls and

operation of the infotainment system.

Infotainment System 7-103

. Pair cell phone(s) to the vehicle.

The system may not work with all cell phones. See “Pairing” in this section for more information. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section for more information.

. See “Storing and Deleting Phone

Numbers” in this section for more information.

{ WARNING

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment (navigation) system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (104,1)

7-104

Infotainment System

A Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The system can be used while the key is in the ON/RUN or ACC/ACCESSORY position. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions, and not all phones work with the in-vehicle Bluetooth system. See www.gm.com/bluetooth for more information on compatible phones. Voice Recognition The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags. For additional information, say “Help” while you are in a voice recognition menu. Noise: Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise.

When to Speak: A short tone sounds after the system responds indicating when it is waiting for a voice command. Wait until the tone and then speak. How to Speak: Speak clearly in a calm and natural voice. Audio System When using the in-vehicle Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the audio system volume knob, during a call, to change the volume level. The adjusted volume level remains in memory for later calls. To prevent missed calls, a minimum volume level is used if the volume is turned down too low. Bluetooth Controls Use the buttons on the steering wheel to operate the in-vehicle Bluetooth system. See Steering Wheel Controls on page 5‑2.

b / g (Push to Talk): Press to answer incoming calls, confirm system information, and start speech recognition. c / x (End): Press to end a call, reject a call, or cancel an operation. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See the cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if equipped. See OnStar Overview on page 14‑1.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be

paired to the Bluetooth system.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (105,1)

Infotainment System 7-105

The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To connect to a different paired phone, see “Connecting to a Different Phone” later in this section.

Pairing a Phone 1. Press and hold b / g for

two seconds.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Pair.” The system responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5.

4. Start the pairing process on the cell phone that you want to pair. For help with this process, see the cell phone manufacturer's user guide.

5. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “ has been successfully paired” after the pairing process is complete.

6. Repeat Steps 1–5 to pair

additional phones.

Listing All Paired and Connected Phones The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press and hold b / g for

two seconds.

2. Say “Bluetooth.” 3. Say “List.”

Deleting a Paired Phone If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press and hold b / g for

two seconds.

2. Say “Bluetooth.” 3. Say “Delete.” The system asks

which phone to delete.

4. Say the name of the phone you

want to delete.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (106,1)

7-106

Infotainment System

Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times. 1. Press and hold b / g for

two seconds.

2. Say “Bluetooth.” 3. Say “Change phone.”

If another cell phone is found, the response will be “ is now connected.” If another cell phone is not found, the original phone remains connected.

Storing and Deleting Phone Numbers The system can store up to 30
phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems, if equipped. The following commands are used to delete and store phone numbers. Store: This command will store a phone number, or a group of numbers as a name tag. Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time. Delete: This command is used to delete individual name tags. Delete All Name Tags: This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped.

Using the “Store” Command 1. Press and hold b / g for

two seconds. 2. Say “Store.” 3. Say the phone number or group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.

Using the “Digit Store” Command If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold b / g for

two seconds.

2. Say “Digit Store.”

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (107,1)

3. Say each digit, one at a time,

that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.

Using the “Delete” Command 1. Press and hold b / g for

two seconds. 2. Say “Delete.” 3. Say the name tag you want to

delete.

Using the “Delete All Name Tags” Command This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped.

To delete all name tags: 1. Press and hold b / g for

two seconds.

2. Say “Delete all name tags.” Listing Stored Numbers The list command will list all stored numbers and name tags.

Using the “List” Command 1. Press and hold b / g for

two seconds.

2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.” Making a Call Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag.

Infotainment System 7-107

Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time. Re-dial: This command is used to dial the last number used on the cell phone.

Using the “Dial” or “Call” Command 1. Press and hold b / g for

two seconds.

2. Say “Dial” or “Call.” 3. Say the entire number without pausing, or say the name tag.

Once connected, the person called will be heard through the audio speakers.

Calling 911 Emergency 1. Press and hold b / g for

two seconds.

2. Say “Dial” or “Call.” 3. Say “911.” 4. Say “Dial” or “Call.”

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (108,1)

7-108

Infotainment System

Once connected, the person called will be heard through the audio speakers.

Using the “Digit Dial” Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold b / g for

two seconds.

2. Say “Digit Dial.”

3. Say each digit, one at a time,

that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”

Once connected, the person called will be heard through the audio speakers.

Using the “Re-dial” Command 1. Press and hold b / g for

two seconds.

2. After the tone, say “Re-dial.” Once connected, the person called will be heard through the audio speakers. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . Press b / g to answer the call. . Press c / x to ignore a call.

Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an

incoming call when another call is active. The original call is placed on hold.

. Press b / g again to return to

the original call. To ignore the incoming call, no action is required.

. Press c / x to disconnect the current call and switch to the call on hold.

Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press b / g. 2. Say “Three-way call.”

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (109,1)

3. Use the dial or call command to dial the number of the third party to be called.

4. Once the call is connected, press b / g to link all callers together.

Ending a Call Press c / x to end a call. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them.

To mute a call, press b / g , and then say “Mute call.” To cancel mute, press b / g , and then say “Un-mute call.”

Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone.

The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

Transferring Audio from the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press b / g. 2. Say “Transfer Call.”

Transferring Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press b / g. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information.

Infotainment System 7-109

Voice Pass-Thru Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone: 1. Press and hold b / g for

two seconds.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Voice.” The system responds “OK, accessing .”

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (110,1)

7-110

Infotainment System

Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial.” 3. Say the number or name tag

to send.

Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the phone book and phone pairing information. For information on how to delete this information, see the previous section “Deleting a Paired Phone” and the previous sections on deleting name tags.

Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 13‑21 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (1,1)

Climate Controls

Climate Control Systems

Dual Automatic Climate Control

System . . . . . . . . . . . . . . . . . . . . . . 8-1

Rear Climate Control System

(Rear Climate with Rear Seat Audio) . . . . . . . . . . . . . . . . . . . . . . . 8-6

Air Vents

Air Vents . . . . . . . . . . . . . . . . . . . . . . 8-8

Climate Controls

8-1

Climate Control Systems Dual Automatic Climate Control System

The heating, cooling, and ventilation in the vehicle can be controlled with this system. The vehicle also has a flow-through ventilation system described later in this section.

Climate Control with Heated and Cooled Seats Shown

A. Driver and Passenger Temperature Controls

B. AUTO (Automatic Operation) C. Defrost D. Recirculation E. Rear Window Defogger

F. Air Conditioning G. Heated and Cooled Seats H. Fan Control I. REAR (Rear Climate Control) J. Air Delivery Mode Control

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (2,1)

8-2

Climate Controls

Off: Press the driver side temperature knob to turn the climate control system off. Outside air still enters the vehicle, and is directed to the floor. This direction can be changed by pressing the mode button. The temperature can also be adjusted using either temperature knob. Press the up or down arrows on the fan switch, the defrost button, the AUTO button, driver side temperature knob, or the air conditioning button to turn the system on when it is off.

Driver and Passenger Side Temperature Knob The driver and passenger side temperature knobs are used to adjust the temperature of the air coming through the system on the driver or passenger side of the vehicle. The temperature can be adjusted even if the system is turned off. This is possible since outside air always flows through the system as the vehicle is moving

forward unless it is set to recirculation mode. See “Recirculation” later in this section. Turn the knob clockwise or counterclockwise to increase or decrease the cabin temperature. The display will show the temperature setting increasing or decreasing. Set the passenger temperature setting to match the driver temperature setting by pressing the passenger temperature knob. When in defrost mode the passenger temperature setting cannot be changed. Automatic Operation AUTO (Automatic): When automatic operation is active the system will control the inside temperature, the air delivery, and the fan speed.

Use the steps below to place the entire system in automatic mode: 1. Press the AUTO button.

When AUTO is selected, the display will change to show the current temperature(s) and AUTO come on the display. The current delivery mode and fan speed will also be displayed for approximately 5 seconds. When AUTO is selected, the air conditioning operation and air inlet will be automatically controlled. The air conditioning compressor will run when the outside temperature is over about 4°C (40°F). The air inlet will normally be set to outside air. If it is hot outside, the air inlet may automatically switch to recirculate inside air to help quickly cool down the vehicle. The light on the button comes on in recirculation.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (3,1)

2. Set the driver and passenger

temperature. To find your comfort setting, start with a 23°C (74°F) temperature setting and allow about 20 minutes for the system to regulate. Use the driver or passenger temperature buttons to adjust the temperature setting as necessary. If a temperature setting of 15°C (60°F) is chosen, the system remains at the maximum cooling setting. If a temperature setting of 32°C (90° F) is chosen, the system remains at the maximum heat setting. Choosing either maximum setting will not cause the vehicle to heat or cool any faster.

Be careful not to cover the sensor located on the top of the instrument panel near the windshield. This sensor regulates air temperature based on sun load and also turns on the headlamps.

To avoid blowing cold air in cold weather, the system will delay turning on the fan until warm air is available. The length of delay depends on the engine coolant temperature. Pressing the fan switch will override this delay and change the fan to a selected speed. Manual Operation y 9 z (Fan Control): Press the up or down arrows to increase or decrease the fan speed Pressing this button when the system is off will turn the system on. Pressing either arrow while using automatic operation will place the fan in manual operation. The fan setting will display and the AUTO light will turn off. The air delivery will remain in automatic operation. y N z (Air Delivery Mode Control): Press to change the direction of the airflow in the vehicle. Repeatedly press the button until the desired mode appears on the display.

Climate Controls

8-3

When the system is turned off, the display goes blank after displaying the current status of the system. H (Vent): Air is directed to the instrument panel outlets. ) (Bi-Level): Air is divided between the instrument panel and floor outlets. Some air is directed towards the windshield and side window outlets. Cooler air is directed to the upper vents and warmer air to the floor vents. 6 (Floor): Air is directed to the floor outlets, with some to the windshield, side window outlets, and second row floor outlets. In this mode, the system automatically selects outside air. - (Defog): This mode clears the windows of fog or moisture. Air is directed to the windshield, floor outlets, and side window vents. In this mode, the system turns off recirculation and runs the air conditioning compressor unless the outside temperature is close to

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (4,1)

8-4

Climate Controls

freezing. The recirculation mode cannot be selected while in the defog mode. 0 (Defrost): This mode removes fog or frost from the windshield more quickly. Air is directed to the windshield and side window vents, with some directed to the floor vents. In this mode, the system automatically forces outside air into the vehicle and runs the air conditioning compressor unless the outside temperature is close to freezing. The recirculation mode cannot be selected while in the defrost mode. The passenger temperature control cannot be activated while in defrost mode. If the passenger control knob is pressed, the passenger temperature flashes three times and will not work. If the passenger control knob is adjusted, the driver temperature indicator changes. The passenger temperature will not be displayed.

If vent, bi-level, or floor mode is selected again, the climate control system displays the previous temperature settings. Do not drive the vehicle until all the windows are clear. # (Air Conditioning): Press to turn the air conditioning (A/C) compressor on and off. An indicator light comes on to show that the air conditioning is on. Pressing this button when the outside temperature is too cool for air conditioning will make the air conditioning indicator flash 3 times and then turn off indicating the air conditioning mode is not available. If the air conditioning is on and the outside temperature drops below a temperature which is too cool for air conditioning to be effective, the air conditioning light turns off to show that the air conditioning mode has been canceled.

On hot days, open the windows long enough to let hot inside air escape. This helps to reduce the time it takes for the vehicle to cool down. It also helps the system to operate more efficiently. The air conditioning system removes moisture from the air, so a small amount of water might drip under the vehicle while idling or after turning off the engine. This is normal. @ (Recirculation): Press to turn the recirculation mode on or off. An indicator light comes on to show that the recirculation is on. This mode recirculates and helps to quickly cool the air inside the vehicle. It can be used to help prevent outside air and odors from entering the vehicle.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (5,1)

Climate Controls

8-5

Heated Mirrors: Press 1 to help clear fog or frost from the surface of the outside mirror. See “Outside Heated Mirrors” in Heated Mirrors on page 2‑16. Heated or Cooled Seats: For vehicles with heated and cooled seats, see Heated and Ventilated Front Seats on page 3‑7.

The recirculation mode cannot be used with floor, defog, or defrost modes. If recirculation is selected with one of those modes, the indicator light flashes three times and then turns off. The air conditioning compressor also comes on when this mode is activated. While in recirculation mode the windows may fog when the weather is cold and damp. To clear the fog, select either the defog or defrost mode and increase the fan speed. The recirculation mode can also be turned off by turning off the ignition. REAR (Rear Climate Control): For vehicles with the rear heating and air conditioning controls. Press the REAR button to turn the rear climate control system on or off. See Rear Climate Control System (Rear Climate with Rear Seat Audio) on page 8‑6.

Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. 1 (Rear Window Defogger): Press to turn the rear window defogger on or off. It automatically turns off after it has been activated. The defogger can also be turned off by turning off the engine. Do not drive the vehicle until all the windows are clear. Notice: Do not use a razor blade or sharp object to clear the inside rear window. Do not adhere anything to the defogger grid lines in the rear glass. These actions may damage the rear defogger. Repairs would not be covered by your warranty.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (6,1)

8-6

Climate Controls

Rear Climate Control System (Rear Climate with Rear Seat Audio)

For vehicles with the rear heat and air conditioning controls, they are integrated with the rear seat audio controls located in the center console. The system can be controlled from the front controls as well as the rear controls.

The rear climate control system can also be turned off by pressing and holding the C button. To turn the system on from the rear seats, press any rear climate control button, except the C button. Mimic Mode: This mode matches the rear climate control to the front climate control airflow settings. It comes on when REAR is pressed the first time.

Rear Climate Control with Rear Seat Audio Controls

A. Fan Control B. Air Delivery Mode Control C. Temperature Control

REAR: Press the REAR button on the front climate control system to turn the rear climate control system on or off. An indicator comes on when the rear system is on.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (7,1)

Independent Mode: This mode directs rear seating airflow according to the settings of the rear controls. To turn the system on from the rear, press any rear climate control button, except the C button. Automatic Operation, If Equipped AUTO: Press the air delivery mode button until this setting is selected to control the inside temperature, air delivery, and fan speed. AUTO appears in the display when automatic operation is active.

+ or − (Increase/Decrease Temperature): Press the + or − buttons to increase or decrease the cabin temperature. The rear control temperature display will show the temperature setting increasing or decreasing. The display only indicates climate control functions when the system is in rear independent mode. Manual Operation D C (Fan Control): Press these buttons on the rear seat audio control panel to increase or decrease the airflow. Pressing the fan up button when the system is off will turn the system on. The air delivery mode will remain under automatic control.

Climate Controls

8-7

+ or − (Temperature Control): Press these buttons to adjust the temperature of the air flowing into the passenger area. Press the + button for warmer air and press the − button for cooler air. N (Air Delivery Mode Control): Press the mode button to change the direction of the airflow in the vehicle. Repeatedly press the button until the desired mode appears on the display. Multiple presses will cycle through the delivery selections.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (8,1)

8-8

Climate Controls

Air Vents Use the air outlets located in the center and on the side of the instrument panel to direct the airflow.

Operation Tips . Keep the hood and front air

inlets free of ice, snow, or any other obstruction (such as leaves). The heater and defroster will work far better, reducing the chance of fogging the inside of the windows.

. When you enter a vehicle in cold weather, press the fan up button to the maximum fan level before driving. This helps clear the intake ducts of snow and moisture, and reduces the chance of fogging the inside of the window.

. Keep the air path under the front seats clear of objects. This helps air to circulate throughout the vehicle.

. Adding outside equipment to the

front of the vehicle, such as hood-air deflectors, may affect the performance of the heating and air conditioning system. Check with your dealer before adding equipment to the outside of the vehicle.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (1,1)

Driving and Operating

Driving Information

Distracted Driving . . . . . . . . . . . . . 9-2
Defensive Driving . . . . . . . . . . . . . 9-3
Drunk Driving . . . . . . . . . . . . . . . . . 9-3
Control of a Vehicle . . . . . . . . . . . 9-3
Braking . . . . . . . . . . . . . . . . . . . . . . . 9-4
Steering . . . . . . . . . . . . . . . . . . . . . . . 9-4
Off-Road Recovery . . . . . . . . . . . . 9-5
Loss of Control . . . . . . . . . . . . . . . . 9-5
Off-Road Driving . . . . . . . . . . . . . . 9-6
Driving on Wet Roads . . . . . . . 9-10
Highway Hypnosis . . . . . . . . . . . 9-11
Hill and Mountain Roads . . . . . 9-12
Winter Driving . . . . . . . . . . . . . . . 9-12
If the Vehicle Is Stuck . . . . . . . . 9-14
Vehicle Load Limits . . . . . . . . . . 9-15

Starting and Operating

New Vehicle Break-In . . . . . . . . 9-21
Adjustable Throttle and Brake

Pedal . . . . . . . . . . . . . . . . . . . . . . . 9-22
Ignition Positions . . . . . . . . . . . . 9-22
Starting the Engine . . . . . . . . . . 9-24
Engine Heater . . . . . . . . . . . . . . . 9-25

Retained Accessory

Power (RAP) . . . . . . . . . . . . . . . 9-26
Shifting Into Park . . . . . . . . . . . . 9-26
Shifting out of Park . . . . . . . . . . 9-27
Parking over Things

That Burn . . . . . . . . . . . . . . . . . . 9-28
Active Fuel Management® . . . 9-28

Engine Exhaust

Engine Exhaust . . . . . . . . . . . . . . 9-28
Running the Vehicle While

Parked . . . . . . . . . . . . . . . . . . . . . 9-29

Automatic Transmission

Automatic Transmission . . . . . 9-29
Manual Mode . . . . . . . . . . . . . . . . 9-32
Tow/Haul Mode . . . . . . . . . . . . . . 9-33

Drive Systems

All-Wheel Drive . . . . . . . . . . . . . . 9-34

Brakes

Antilock Brake

System (ABS) . . . . . . . . . . . . . . 9-34
Parking Brake . . . . . . . . . . . . . . . 9-35
Brake Assist . . . . . . . . . . . . . . . . . 9-36
Hill Start Assist (HSA) . . . . . . . 9-36

Driving and Operating

9-1

Ride Control Systems

StabiliTrak® System . . . . . . . . . 9-37
Locking Rear Axle . . . . . . . . . . . 9-39
Road Sensing Suspension . . . 9-40
Continuous Damping

Control (CDC) . . . . . . . . . . . . . . 9-40
Automatic Level Control . . . . . 9-40

Cruise Control

Cruise Control . . . . . . . . . . . . . . . 9-41

Object Detection Systems

Ultrasonic Parking Assist . . . . 9-44
Side Blind Zone

Alert (SBZA) . . . . . . . . . . . . . . . 9-45

Rear Vision

Camera (RVC) . . . . . . . . . . . . . 9-47

Fuel

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 9-51
Recommended Fuel . . . . . . . . . 9-51
Gasoline Specifications . . . . . . 9-51
California Fuel

Requirements . . . . . . . . . . . . . . 9-52
Fuels in Foreign Countries . . . 9-52
Fuel Additives . . . . . . . . . . . . . . . 9-52
Fuel E85 (85% Ethanol) . . . . . 9-53
Filling the Tank . . . . . . . . . . . . . . 9-54
Filling a Portable Fuel

Container . . . . . . . . . . . . . . . . . . . 9-56

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (2,1)

9-2

Driving and Operating

Towing

General Towing

Information . . . . . . . . . . . . . . . . . 9-56

Driving Characteristics and

Towing Tips . . . . . . . . . . . . . . . . 9-57
Trailer Towing . . . . . . . . . . . . . . . . 9-59
Towing Equipment . . . . . . . . . . . 9-63
Trailer Sway

Control (TSC) . . . . . . . . . . . . . . 9-67

Conversions and Add-Ons

Add-On Electrical

Equipment . . . . . . . . . . . . . . . . . 9-67

Driving Information

Distracted Driving Distraction comes in many forms and can take your focus from the task of driving. Exercise good judgment and do not let other activities divert your attention away from the road. Many local governments have enacted laws regarding driver distraction. Become familiar with the local laws in your area. To avoid distracted driving, always keep your eyes on the road, hands on the wheel, and mind on the drive. . Do not use a phone in

demanding driving situations. Use a hands-free method to place or receive necessary phone calls.

. Watch the road. Do not read,

take notes, or look up information on phones or other electronic devices.

. Designate a front seat

passenger to handle potential distractions.

. Become familiar with vehicle

features before driving, such as programming favorite radio stations and adjusting climate control and seat settings. Program all trip information into any navigation device prior to driving.

. Wait until the vehicle is parked

to retrieve items that have fallen to the floor.

. Stop or park the vehicle to tend

to children.

. Keep pets in an appropriate

carrier or restraint.

. Avoid stressful conversations while driving, whether with a passenger or on a cell phone.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (3,1)

{ WARNING

Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Refer to the Infotainment section for more information on using that system, including pairing and using a cell phone. Refer to the Navigation section for information on that system, including pairing and using a cell phone.

Driving and Operating

9-3

Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear the safety belt. See Safety Belts on page 3‑16. . Assume that other road users

(pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready.

. Allow enough following distance

between you and the driver in front of you. Focus on the task of driving.

Drunk Driving Death and injury associated with drinking and driving is a global tragedy.

{ WARNING

Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious — or even fatal — collision if you drive after drinking. Do not drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink.

Control of a Vehicle Braking, steering, and accelerating are important factors in helping to control a vehicle while driving.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (4,1)

9-4

Driving and Operating

Braking Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average driver reaction time is about three-quarters of a second. In that time, a vehicle moving at 100 km/h (60 mph) travels 20 m (66 ft), which could be a lot of distance in an emergency. Helpful braking tips to keep in mind include: . Keep enough distance between

you and the vehicle in front of you.

. Avoid needless heavy braking. . Keep pace with traffic. If the engine ever stops while the vehicle is being driven, brake normally but do not pump the brakes. Doing so could make the pedal harder to push down. If the engine stops, there will be some

power brake assist but it will be used when the brake is applied. Once the power assist is used up, it can take longer to stop and the brake pedal will be harder to push.

Steering

Hydraulic Power Steering Your vehicle has hydraulic power steering. It may require maintenance. See Power Steering Fluid on page 10‑20. If power steering assist is lost because the engine stops or because of a system malfunction, the vehicle can be steered but may required increased effort. See your dealer if there is a problem. If the vehicle is a hybrid, see the hybrid supplement for more information.

Curve Tips

Take curves at a reasonable speed.

. Reduce speed before entering a

curve.

. Maintain a reasonable steady

speed through the curve

. Wait until the vehicle is out of the curve before accelerating gently into the straightaway.

Steering in Emergencies

There are some situations when steering around a problem may be more effective than braking.

. Holding both sides of the

steering wheel allows you to turn 180 degrees without removing a hand.

. Antilock Brake System (ABS) allows steering while braking.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (5,1)

Off-Road Recovery

The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. Follow these tips: 1. Ease off the accelerator and then, if there is nothing in the way, steer the vehicle so that it straddles the edge of the pavement.

2. Turn the steering wheel about one-eighth of a turn, until the right front tire contacts the pavement edge.

3. Turn the steering wheel to go

straight down the roadway.

Loss of Control

Skidding There are three types of skids that correspond to the vehicle's three control systems: . Braking Skid — wheels are not

rolling.

. Steering or Cornering Skid —

too much speed or steering in a curve causes tires to slip and lose cornering force.

. Acceleration Skid — too much

throttle causes the driving wheels to spin.

Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible.

Driving and Operating

9-5

If the vehicle starts to slide, follow these suggestions: . Ease your foot off the

accelerator pedal and steer the way you want the vehicle to go. The vehicle may straighten out. Be ready for a second skid if it occurs.

. Slow down and adjust your driving according to weather conditions. Stopping distance can be longer and vehicle control can be affected when traction is reduced by water, snow, ice, gravel, or other material on the road. Learn to recognize warning clues — such as enough water, ice, or packed snow on the road to make a mirrored surface — and slow down when you have any doubt. Try to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide.

Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/ 9/12

Black plate (6,1)

9-6

Driving and Operating

Remember: Antilock brakes help avoid only the braking skid.

Off-Road Driving Four-wheel-drive and all-wheel-drive vehicles can be used for off-road driving. Vehicles without four-wheel drive, all-wheel-drive and vehicles not equipped with All Terrain (AT) or On-Off Road (OOR) tires must not be driven off-road except on a level, solid surface. To contact the tire manufacturer for more information about the original equipment tires, see the Limited Warranty and Owner Assistance Information manual. Controlling the vehicle is the key to successful off-road driving. One of the best ways to control the vehicle is to control the speed.

{ WARNING

When driving off-road, bouncing and quick changes in direction can easily throw you out of position. This could cause you to lose control and crash. You and your passengers should always wear safety belts.

Before Driving Off-Road . Have all necessary maintenance

and service work completed. Fuel the vehicle, fill fluid levels, and check inflation pressure in all tires, including the spare, if equipped.

. Read all the information about

four-wheel-drive and all-wheel-drive vehicles in this manual.

. Make sure all underbody

shields, if equipped, are properly attached.