2012 Volvo S80 Owners Manual

* Option/accessory, for more information, see Introduction.

update needed is displayed (see also "Selecting a channel").

> The channels in the selected category

are displayed.

2. Call Sirius at 1-888-539-SIRIUS (7474). 3.

If you tune to an unsubscribed channel, the Sirius ID will be displayed. The Sirius ID can also be accessed from the menu (press OK/MENU, turn TUNE to scroll to the Advanced settings menu, press OK/ MENU, scroll to SIRIUS ID and press OK/ MENU to display the number).

4. Updating subscription will be displayed

while the subscription is being updated, after which the display will return to the normal view.

SIRIUS ID The SIRIUS ID (sometimes referred to as the Electronic Serial Number or ESN) is required when contacting the Sirius Call Center. It is used to activate your account and when mak- ing any account transactions.

Selecting a channel category 1. Turn TUNE to display a list of channels. 2. Press EXIT. 3. Turn TUNE to scroll through the list of cat-

egories and press OK/MENU to make a selection.

NOTE

• The category All is default, which ena- bles you to scroll through the entire list of available satellite channels.

• The channel categories are automati-

cally updated several times a year. This takes approximately two minutes and will interrupt normal broadcasting. A message will be displayed while updat- ing is in progress. Information on chan- nel or feature updates is available at www.sirius.com.

Selecting a channel There are three ways of tuning in a channel: • Using the left and right arrow keys to go to the next channel. Skipped channels (see page 217) will be excluded.

• By turning the TUNE control and selecting

a channel from the list

• Through direct channel entry.

05 Infotainment

Radio

NOTE

• The numbers of skipped or locked

channels will not be displayed.

• If a channel is locked, the access code must be entered before the channel can be selected. See "Unlocking a channel" on page 217.

Direct channel entry The Sirius satellite channels are in numerical order throughout all of the categories. To access a channel directly: 1. Turn TUNE to access the channel list. 2. Use the number key buttons to enter the

channel's number.

3. Press OK/MENU. The radio will tune to this

channel, even if it belongs to a category other than the currently selected one.

Scanning SCAN automatically searches through the list of satellite channels. The search will only be carried out in the selected category, see page 211 for more detailed information on the scan function.

Storing a channel A total of 20 satellite channels can be stored; 10 channels each for Sirius 1 and 2, see

05

``

215

05 Infotainment

Radio

page 211 for detailed information on storing channels. • A long press on one of the number keys stores the currently tuned channel on that key.

• A short press on a number key while the radio is in SAT 1 or SAT 2 mode will tune to the preset satellite channel stored on that button, regardless of the currently selected channel category.

Searching for and storing songs The Song Seek function provides notification when Sirius is broadcasting the songs selected in song memory. Song memory enables you to store the name of the song for future advance notification when that song is being played. Song seek When a satellite radio channel plays one of the songs stored in the song memory while the Song seek feature is activated, the listener will be alerted by a text message and an audible signal. Press OK/MENU to listen to the song or EXIT to cancel. To activate/deactivate the song seek function: 1. Press OK/MENU.

05

216

2. Turn TUNE to scroll to Song memory and

press OK/MENU.

3. Turn TUNE to scroll to Song Seek and

press OK/MENU to activate or deactivate the function.

Radio text This text provides information about the song that is currently playing. To turn this feature on or off, press OK/MENU and scroll to Show radio text and press OK/MENU to toggle between on or off.

NOTE

When the song has ended, the radio will remain tuned to the channel on which the song was played.

Song memory Up to ten songs can be saved in the system's memory. To add the currently playing song to the list: 1. Press OK/MENU. 2. Scroll to Song memory and press OK/

MENU.

3. Scroll to Add current song to song

memory and press OK/MENU.

If a new song is selected when the memory is full, you will be prompted to delete a song from the list. To do so: 1. Press OK/MENU. 2. Turn TUNE to scroll through the list of

songs. Select a song and press OK/ MENU to delete it from the list.

Advanced Sirius settings This menu function enables you to make set- tings on certain Sirius satellite radio functions. To access this menu: 1. Press OK/MENU. 2. Scroll to the Advanced settings menu

and press OK/MENU.

WARNING

Settings should be made when the vehicle is at a standstill.

The following settings can be made in the Sir- ius menu: • Channel skip settings can be made • Channel lock settings can be made • The channel access code can be displayed or changed (see also "Locking a channel" on page 217)

• Your Sirius ID can be displayed • Reset Sirius settings

Skip options This function is used to remove a channel from the list of available channels. Skipping a channel 1. Press OK/MENU. 2. Scroll to the Advanced settings menu. 3. Press OK/MENU to enter the Skip

options menu.

4. Press OK/MENU to enter Channel skip

list.

5. Press OK/MENU to select All categories

or turn TUNE to scroll to a category and press OK/MENU to select it.

6. Press OK/MENU to select Skip all

channels in the category or turn TUNE to scroll to a channel and press OK/ MENU to select or deselect it. Multiple channels can be selected.

Unskip all channels This removes all channels from the skip list and makes them available for selection. Temporary unskip all channels This function will temporarily unskip all chan- nels and make them available for selection. The channels remain on the skip list and will again

be skipped the next time the ignition is switched on.

Channel lock Access to specific channels can be restricted (locked). A locked channel will not provide audio, song titles, or artist information.

NOTE

All channels are initially unlocked.

Locking a channel 1. Press OK/MENU. 2. Scroll to the Advanced settings menu. 3. Press OK/MENU and turn TUNE to scroll to the Lock options menu and press OK/ MENU.

4. Use the number keys in the central control

panel to enter the channel access code2
and press OK/MENU.

5. Press OK/MENU to enter the Channel

lock list.

6. Press OK/MENU to select All categories

or turn TUNE to scroll to a category and press OK/MENU to select it.

2 The default code is 0000. If you have changed the code and forgotten it, see the section "If you have forgotten the access code."

05 Infotainment

Radio

7. Press OK/MENU to select Lock all

channels in the category or turn TUNE to scroll to a channel and press OK/ MENU to select it. Multiple channels can be selected.

The selected channel is now locked and a checked box will be displayed to indicate this. It will be necessary to enter the channel access code2 in order to listen to a locked channel.

Unlocking a channel A channel's access code2 is required to unlock a channel. Unlock all channels This permanently removes all channels from the locked list and makes them available for selection. Temporarily unlock all channels This function will temporarily unlock all chan- nels and make them available for selection. The channels remain on the locked list and will again be locked the next time the ignition is switched on. CHANGE CODE This function makes it possible to change the channel access code. The default code is 0000. To change the code:

05

``

217

05 Infotainment

Radio

1. Select Change code in theLock options

menu and press OK/MENU.

2. Enter the new code and press OK/MENU. 3. Confirm the new code and press OK/

MENU.

If an incorrect code is entered, the text Incorrect code is displayed. If you have forgotten the access code: 1. Select SIRIUS ID in the Advanced

settings menu and press OK/MENU.

2. Press and hold the OK/MENU button for

several seconds.

3. The current code will be displayed. Your Volvo retailer can also provide you with assistance. SIRIUS ID This function displays the 12-digit Sirius acti- vation ID.

05

218

CD/DVD functions

Center console control panel

Disc slot

MEDIA button

Eject

Number keys

TUNE:Turn to navigate among menu selections/folders/tracks. OK/MENU: Press to confirm your selec- tion or access the menus for the currently selected source (e.g., DISC).Left/right arrow keys: Fast back/forward and change track or chapter1. Forward/back and change tracks or chap- ter.

1 DVDs only

The media player supports and can play the following main types of discs and files: • Purchased CDs (CD Audio) • Home-burned CDs with audio and /or

video files

• Home-burned DVDs with audio and /or

video files

• Purchased DVDs See page 222 for a list of compatible formats. Media menu selections can be made from the center console or the steering wheel keypad. See page 252 for more information about the infotainment menu system.

Playing a disc Press MEDIA several times until Disc is dis- played. Release the button and wait several seconds or press OK/MENU. If there is a disc in the player, it will begin playing automatically. Otherwise, Insert disc will be displayed. Insert the disc into the slot with the text side upward and it will begin playing automatically. If a disc with audio/video files is inserted, its folder structure will be read by the system. It may take several seconds until the disc begins playing, depending on its quality and the amount of information it contains.

05 Infotainment

Media player

Disc eject For reasons of traffic safety, an ejected disc must be removed within 12 seconds or it will be automatically drawn back into the slot.

Pause When the audio system volume is turned off completely, the player will pause and will resume playing when the volume is turned up again.

Navigating a disc and playing tracks CD audio discs Turn TUNE to access the disc's playlist and to navigate in this list. Press OK/MENU to con- firm a choice and begin listening. Press EXIT to cancel. Press and hold EXIT to return to the playlist's root level.

buttons on the center console or

The steering wheel keypad can also be used to change tracks. Home-burned CD/DVD audio/video files Turn TUNE to access the disc's playlist and to navigate in this list. Press OK/MENU to con- firm a choice and begin listening. Use EXIT to stop or to go back in the disc's folder structure. Press and hold EXIT to return to the playlist's root level.

05

``

219

05 Infotainment

Media player

buttons on the center console or

- audio files - video files - folders

The steering wheel keypad can also be used to change audio/video files. The following symbols are used in the display: • • • When a file has been played, the player will continue to play the rest of the files (of the same type) in the current folder. When all of the files in the folder have been played, the player will automatically go to the next folder and play the files in it (unless Repeat folder is activated). The system automatically detects and changes settings if a disc containing only audio or only video files is inserted in the player and will play these files. However, the system will not change settings if a disc containing both audio and video files is inserted and the player will continue to play the current type of file.

05

NOTE

Video images will only be visible when the vehicle is not moving. When the vehicle is traveling faster than approximately 4 mph (6 km/h), No visual media available while driving will be displayed. Sound from the film will still be audible and video images will be shown again when the vehicle stops.

NOTE

Some copy protected audio files or home- burned audio files may not be read by the player.

DVD videos See page 221 for information.

buttons to fast

Fast forward/reverse Press and hold the forward/reverse. This is done at one speed for audio files but several speeds can be chosen for video files. Press the buttons sev- eral times to increase the speed. Release the button to return to normal viewing speed.

Gracenote(cid:159) track identification If the vehicle is equipped with the optional nav- igation system, this system uses a hard drive containing a database that recognizes music

2 Not video DVDs

220

on audio CDs. The database contains songs that are currently popular. If the media player finds a track in the database, the album title and artist's name are displayed, and the title, artist and album for each song is also dis- played. If the current audio CD is not found in the database, CD text from the disc is used. If no CD text is available, only track 1, track 2, etc., will be displayed.

Scan2
This function plays the first ten seconds of each track/audio file. To start scanning: 1. Press OK/MENU. 2. Turn TUNE to Scan.

> The first ten seconds of each track/

audio file will be played.

3. Stop scanning by pressing EXIT. The cur- rent track/audio file will continue playing.

Random2
This function plays the tracks in random order (shuffle). The random tracks/sound files can be scrolled through in the normal way. To listen to tracks in random order: 1. Press OK/MENU, 2. Turn TUNE to Random

3. Press OK/MENU to activate/deactivate

the random play function.

Press the sole or steering wheel keypad to change tracks/audio files.

buttons on the center con-

Repeat folder3
This function makes it possible to play files in a folder repeatedly. When the last file has been played, the first file will begin again. To acti- vate: 1. Press OK/MENU. 2. Turn TUNE to Repeat folder. 3. Press OK/MENU to activate/deactivate

the function.

Playing video DVDs Play When playing a video DVD, a disc menu may appear on the display, giving you access to extra functions and settings such as choice of subtitle and language, scene selection, etc.

3 Applies to audio/video files on home-burned discs/USB only.

NOTE

Video images will only be visible when the vehicle is not moving. When the vehicle is traveling faster than approximately 4 mph (6 km/h), No visual media available while driving will be displayed. Sound from the film will still be audible and video images will be shown again when the vehicle stops.

Navigating in a DVD's menus

Buttons in the center console control panel, shown above, are used to navigate in a DVD's menus. Changing chapters or titles Turn TUNE to access the list of chapters and navigate among them (if a film is playing, it will

05 Infotainment

Media player

be paused). Press OK/MENU to select a chap- ter and return to the normal view. If a film was playing, it will resume). Press EXIT to access the list of titles. Turn TUNE to select a title and press OK/ MENU to confirm and return to the list of chap- ters. Press EXIT to cancel and return to the normal view (without having made a selection). Changing chapters or title TurnTUNE to access the list of chapters and navigate in this list (the film will pause if it is currently playing). Press OK/MENU to choose a chapter and return to the normal view in the display (if a film was playing, it will resume). Press EXIT to access the list of titles. In the list of titles, turn TUNE to make a selec- tion and press OK/MENU to confirm. This also returns you to the list of chapters. Press EXIT to cancel and return to the normal view (without having made a selection). It is also possible to change chapters by press- ing panel or on the steering wheel keypad.

on the center console control

Advanced settings Angle If the DVD supports this function, it is possible to select a camera angle for a certain scene.

05

``

221

05 Infotainment

Media player

Angle.

This can be done in DVD mode under DVD root Advanced settings menu DivX(cid:159)(cid:159) Video On Demand The media player can be registered to play DivX VOD files from home-burned discs or USB. The registration code can be found by pressing the MY CAR button, and going to Settings code. See page 127 for more information about the menu system. See also www.divx.com/vod for more informa- tion.

Information

DivX® VOD

Screen settings Screen settings can be made (when the vehicle is not moving) for: • Brightness • Contrast 1. PressOK/MENU and choose Image

settings and confirm by pressing OK/ MENU.

2. Turn TUNE to the desired setting and

press OK/MENU.

3. Change the setting by turning TUNE and

confirm the change by pressing OK/ MENU.

Press OK/MENU or EXIT to return to the screen settings list.

05

222

To return to the factory settings, select Reset .

Compatible formats The media player can play a number of differ- ent types of files and disc formats, and is com- patible with the formats listed in the following table.

NOTE

Dual format (double-sided discs) such as DVD Plus or CD-DVD are thicker than nor- mal discs and may not play in your infotain- ment system. If a disc containing both CDDA and MP3
tracks is played, all MP3 tracks will be ignored.

Audio formats

CD-Audio, mp3, wma, aac, m4a

Video for-

mats

CD-Video, DVD-Video, divx, avi, asf

Connecting external devices

Sockets for auxiliary devices in the storage com- partment between the front seats An auxiliary device, such as an iPod(cid:159) or MP3
player can be connected to the audio system via one of the sockets in the center console storage compartment. A device connected to the USB socket can be operated using the vehicle's infotainment system controls. There is a notch at the right rear of the center console for routing wires to external devices. This notch helps prevent the wires from being pinched when the cover is closed. An iPod(cid:159) or an MP3 player with rechargeable batteries will also be charged if the device is

1 USB and iPod(cid:159) only

05 Infotainment

AUX/USB sockets

connected to the USB socket (if the vehicle's ignition is on or if the engine is running). To connect a device: 1. Press MEDIA several times to come to the

desired source (iPod, USB or AUX). Release the button and wait for several seconds or press OK/MENU. > For example, if a USB device has been selected, the text Connect USB will be displayed.

2. Connect the device to one of the sockets in the center console storage compartment (see the illustration).

NOTE

• The system supports a number of

iPod(cid:159) models produced in 2005 or later.

• In order to help avoid damage to the USB socket, it will be switched off if there is a short circuit or if the con- nected device uses too much current (which can happen if the device does not comply with the USB standard). The USB socket will reactivate the next time the ignition is switched on if the problem no longer exists. If the problem persists, contact a trained and authorized Volvo service technician.

The text Reading USB will be displayed while the system reads the device's folders. This may take a short time, depending on the folder structure and the number of files. When this information has been loaded, track information will be displayed and a track can be selected. Tracks can be selected in two ways: • Turn TUNE and press OK/MENU • Use the right or left arrow keys

panel or on the steering wheel keypad

) on the center console control

MEDIA menu selections can be made from the center console or the steering wheel keypad. See page 252 for more information about the infotainment menu system.

Navigating and playing tracks1
Turn TUNE to access the device's playlist and to navigate in this list. Press OK/MENU to either select a sub-folder or confirm a choice and begin playback. Press EXIT to cancel and exit the playlist or to go back in the folder struc- ture. Press and hold EXIT to go to the highest level in the playlist.

05

``

223

05 Infotainment

AUX/USB sockets

buttons on the center console or

- audio files - video files - folders

The steering wheel keypad can also be used to change tracks/files. The following symbols are used in the display: • • • When a file has been played, the player will continue to play the rest of the files (of the same type) in the current folder. When all of the files in the folder have been played, the player will automatically go to the next folder1 (unless Repeat folder is activated) and play the files in it. The system automatically detects and changes settings if a device containing only audio or only video files is connected to the USB socket and will play these files. However, the system will not change settings if the device contains both audio and video files and will continue to play the current type of file.

05

Fast forward/reverse1
Press and hold the forward/reverse. This is done at one speed for audio files but several speeds can be chosen

buttons to fast

1 USB and iPod(cid:159) only 2 USB only

224

for video files. Press the buttons sev- eral times to increase the speed. Release the button to return to normal viewing speed.

Scan1
This function plays the first ten seconds of each track/audio file. To start scanning: 1. Press OK/MENU. 2. Turn TUNE to Scan.

> The first ten seconds of each track/

audio file will be played.

3. Stop scanning by pressing EXIT. The cur- rent track/audio file will continue playing.

Random1
This function plays the tracks in random order (shuffle). The random tracks/sound files can be scrolled through in the normal way. To listen to tracks in random order: 1. Press OK/MENU, 2. Turn TUNE to Random 3. Press OK/MENU to activate/deactivate

the random play function.

Press the sole or steering wheel keypad to change tracks/audio files.

buttons on the center con-

Search1
The keypad in the center console can be used to search for a file in the currently selected folder. Start the search by either turning TUNE (to access the folders) or by pressing one of the character keys to enter a letter/number. Pos- sible search results will be displayed as char- acters are entered. Play the file by pressing OK/MENU.

Repeat2
This function makes it possible to play files in a folder repeatedly. When the last file has been played, the first file will begin again. To acti- vate: 1. Press OK/MENU. 2. Turn TUNE to Repeat folder. 3. Press OK/MENU to activate/deactivate

the function.

External sound sources USB flash drive To simplify the use of a USB flash drive, it is advisable to only store music files on the drive. It will take considerably longer for the system

iPod(cid:159) An iPod(cid:159) receives current and its battery is charged through the USB cable. The system will only play audio files from an iPod(cid:159).

NOTE

When an iPod(cid:159) is used as a sound source, the vehicle's audio system has a menu structure similar to the one in the iPod(cid:159). See the iPod's manual for detailed information.

Compatible file formats via the USB socket The following audio and video files are suppor- ted by the system when playing a device con- nected to the USB socket.

Audio formats

mp3, wma, aac, m4a

Video formats

divx, avi, asf

to index the files on the drive if it contains any- thing other than compatible music files.

NOTE

• The system supports removable media that uses the USB 2.0 standard and the FAT32 file system. It can index up to 1,000 folders and a maximum of 254
sub-folders/files for each folder. How- ever, the highest folder level can sup- port up to 1,000 sub-folders/files. • When using a longer type of USB device, connecting it with a USB adapter cable will help reduce mechan- ical wear on the USB socket and on the device.

USB hub A USB hub can be connected to the USB socket, making it possible to connect several USB devices at the same time. To select one of the devices, go to the menu USB menu Select USB device MP3 player Many MP3 players have a file indexing system that is not supported by the vehicle's audio system. In order to use an MP3 player, the sys- tem must be set to USB Removable device/ Mass Storage Device.

05 Infotainment

AUX/USB sockets

05

225

05 Infotainment

Bluetooth(cid:159)(cid:159) media

Streaming audio

Introduction The vehicle's media player is equipped with Bluetooth(cid:159) and can play streaming audio files from a Bluetooth(cid:159) device such as a cell phone or personal digital assistant (PDA). Navigation and control of the device can be done through the vehicle's center console control panel or the steering wheel keypad. On certain external devices, it is also possible to change tracks from the device. In order to listen streaming audio, the vehicle's media player must first be put in Bluetooth mode. To do so, Press MEDIA several times until Bluetooth is displayed. Release the but- ton and wait several seconds or press OK/ MENU. Choices can be made in the Bluetooth menus from the center console control panel or the steering wheel keypad. See page 252 for addi- tional information about navigating the various menus.

05

226

NOTE

Overview

Any Bluetooth media players used must support Audio/Video Remote Control Pro- file (AVRCP) and Advanced Audio Distribu- tion Profile (A2DP). The player must use AVRCP version 1.3 and A2DP 1.2. If older versions of these standards are used, cer- tain features (e.g., scan or random) may not function. Not all cell phones or media players are fully compatible with the vehicle's Bluetooth sys- tem. A list of compatible devices is available at you Volvo retailer or at www.volvo- cars.us.

The vehicle's media player can only play audio files through the Bluetooth(cid:159) function.

Center console control panel

VOL: Volume control

MEDIA button

TUNE: Turn to navigate among menu alter- natives and folders shown in the display. OK/MENU: Press to confirm your selec- tion or access the menus. EXIT: Press to go back in the menu struc- ture or cancel a function. Left/right arrow keys: Short press: change tracks. Long press: fast forward/reverse within a track. The arrow keys on the steer- ing wheel keypad can be used in the same way.

MEDIA menu selections can be made from the center console or the steering wheel keypad.

See page 252 for more information about the infotainment menu system.

Pairing and connecting an external device Before an external device can be connected, it must be paired to the infotainment system. The procedure for connecting an external device varies, depending whether or not the device has previously been paired to the infotainment system. A maximum of 10 external devices can be paired and each device only needs to be paired once. To pair a device: 1. Press MEDIA several times until

Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.

2. Press OK/MENU.

> When Add device is displayed, press

OK/MENU.

3. Be sure the external device's Bluetooth(cid:159)

function is turned on and that the device is "discoverable." See the device's user's guide if necessary. 4. Press OK/MENU.

> The infotainment system will search for external devices that are in range, which may take several minutes. The

Bluetooth(cid:159)-names of the devices found will appear in the center console dis- play.

5. Select the device to be paired and press

OK/MENU.

6. Using the external device’s keypad, enter the digits shown in the audio system’s dis- play and press the device's button used to confirm a choice.

The external device will be automatically paired and connected to the infotainment system. Audio files can now be selected using the

buttons in the center console or on

the steering wheel keypad.

Automatic connection When the Bluetooth(cid:159) function is active and the most recently paired device is within range, it is automatically connected. When the infotain- ment system searches for the most recently paired device, its name is shown in the display. To connect another paired device, press EXIT. See the following section for information about switching to another device.

Switching to another device It is possible to switch among paired Bluetooth(cid:159) devices that are in the vehicle. To do so:

05 Infotainment

Bluetooth(cid:159)(cid:159) media

1. Press MEDIA several times until

Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.

2. Be sure the external device's Bluetooth(cid:159)

function is turned on and that the device is "discoverable." See the devices user's guide if necessary. 3. Press OK/MENU. 4. Turn TUNE to Change Bluetooth

device and confirm by pressing OK/ MENU. > After a short time, the external device's name will appear in the display. If other devices that have been paired are in range, their names will also be dis- played.

5. Select the device to be connected by turn- ing TUNE and pressing OK/MENU to con- firm. > The external device will be connected to

the infotainment system.

Audio files can now be selected using the

buttons in the center console or on

the steering wheel keypad.

Removing a paired device 1.

In Bluetooth mode, press OK/MENU.

05

``

227

Bluetooth(cid:159) version information This feature offers information about the Bluetooth(cid:159) version installed in the vehicle's infotainment system. This information can be found under Bluetooth menu software version in car.

Bluetooth

05 Infotainment

Bluetooth(cid:159)(cid:159) media

2. Turn TUNE to Remove Bluetooth

device and press OK/MENU.

3. Select the device to be removed by turning

TUNE and confirm by pressing OK/ MENU. > A question asking if you would like to remove the device will be displayed. 4. Press OK/MENU to confirm or EXIT to

cancel.

05

Disconnecting an external device The external device is automatically discon- nected from the audio system if it is moved out of range.

Random This function plays the audio files on the exter- nal device in random order (shuffle). This func- tion can be activated/deactivated under: Bluetooth menu

Random

Press the sole or steering wheel keypad to change tracks.

buttons on the center con-

Scanning audio files on an external device This function plays the first ten seconds of each audio file. This function can be activated/ deactivated under: Bluetooth menu Scan.

228

Introduction

System overview Cell phone

Location of the microphone

Steering wheel keypad

Center console control panel and display

Bluetooth® hands-free This feature makes it possible to set up a wire- less connection between a Bluetooth(cid:159)-ena- bled cell phone and the vehicle’s infotainment system. This enables the infotainment system to function as a hands-free connection and allows you to remote-control a number of the phone’s functions. The microphone used by this system is located near the driver's side sun visor (2). The buttons and other controls on the

cell phone can always be used regardless of whether or not the phone is connected to the hands-free system. TEL menu selections can be made from the center console or the steering wheel keypad. See page 252 for more information about the infotainment menu system.

NOTE

Not all cell phones are fully compatible with the hands-free system. A list of compatible phones is available at your Volvo retailer or at www.volvocars.us

WARNING

Never use the hands-free feature or any other device in your vehicle in a way that distracts you from the task of driving safely. Distraction can lead to a serious accident.

Compliance FCC/IC common sentence This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including inter- ference that may cause undesired operation of this device.

05 Infotainment

Bluetooth® hands-free connection

USA: FCC ID A269ZUA130
FCC WARNING Changes or modifications not expressly approved by the party responsible for compli- ance could void the user’s authority to operate the equipment. IC RSS-Gen This equipment complies with FCC/IC radia- tion exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to com- ply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 8 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). Canada: IC 700BIAM2101

05

``

229

05 Infotainment

Bluetooth® hands-free connection

Bluetooth® functions in the center console control panel

Character keys containing letters and numbers for dialing numbers, adding phone book entries, etc. TEL: Press this button to activate/deacti- vate the Bluetooth(cid:159) function. TUNE: Turn to navigate among the menu alternatives in the display. OK/MENU: Press to answer an incoming call, confirm your selection or access the phone menus. Incoming calls can also be answered by pressing the thumb wheel on the steering wheel keypad. EXIT: Press to end or reject calls, erase characters that have been entered, end an ongoing function. This function is also available on the steering wheel keypad.

05

230

Getting started Use the controls on the steering wheel keypad and in the center console to access, navigate and make selections in the hands-free sys- tem’s menus.

Activating/deactivating A short press on the TEL button in the center console activates the hands-free system. The symbol in the display indicates that the

hands-free system is active.

A long press on the TEL button deactivates the hands-free system and disconnects the cell phone.

Connecting cell phones The procedure for connecting a cell phone var- ies, depending on the phone itself and on whether or not the phone has been previously paired with the infotainment system (see page 227 for instructions on pairing an external device). There are two ways of pairing a cell phone to the hands-free system for the first time: Method 1: using the vehicle's menus 1. Activate the cell phone’s Bluetooth(cid:159) func- tion to make the phone discoverable (refer to the phone’s owner’s manual if neces- sary) or go to www.volvocars.com

2. Activate the vehicle’s Bluetooth(cid:159) hands- free system by briefly pressing the TEL button. Continue by pressing OK/MENU.

3. Select Change phone and press OK/

MENU. > Add phone will be displayed. If other cell phones have already been paired with the infotainment system, their names will also be displayed. Press OK/ MENU.

4. With the cell phone in discoverable mode,

press OK/MENU. > The infotainment system will search for

cell phones that are in range, which takes approximately 30 seconds. Any phones detected will be displayed with their Bluetooth(cid:159) names. The hands-free system’s Bluetooth(cid:159) name will appear in the cell phone’s display as My Volvo Car.

5. Select one of the cell phones shown in the

center console display.

6. Using the cell phone’s keypad, enter the

digits shown in the center console display and press the button on the cell phone used to confirm a choice.

Method 2: using the cell phone’s menus 1. Activate the hands-free system by briefly pressing the TEL button in the center con- sole. If there is a cell phone connected, disconnect it from the hands-free system.

2. Make the vehicle discoverable via the Bluetooth(cid:159) function by pressing OK/ MENU and activating the menu selection Phone settings

Discoverable.

3. Perform a search with the cell phone's

Bluetooth(cid:159) function (see the cell phone's user's guide if necessary).

4. Select My Volvo Car in the list of devices

shown in the cell phone’s display.

5. When prompted, enter a PIN code of your

choice in the cell phone using the cell phone's keypad. Enter the same PIN code in the infotainment system using the sys- tem's keypad in the center console.

6. Connect to My Volvo Car from the cell

phone.

The cell phone will be paired (registered) and will be connected automatically to the infotain- ment system. For more information on pairing and connecting a cell phone, see page 233.

Making a call 1. Ensure that

is shown at the top of the center console display and that the hands- free function is in telephone mode.

2. Dial the desired phone number using the center console keypad or use the speed dial function (see page 236). In normal view (see page 203 for information about the various display views). It is also possi- ble to turn TUNE clockwise to access the phone book and then counter-clockwise for the call list. See page 233 for more information about the phone book.

3. Press OK/MENU End or reject a call by pressing EXIT.

Disconnecting the cell phone The cell phone is automatically disconnected from the infotainment system if it is moved out of range. The cell phone can be manually disconnected from the hands-free system by pressing and holding TEL or in phone mode, going to Phone Disconnect phone. See also page menu 232 for more information about connections. The hands-free system is also deactivated when the ignition is switched off (or if the driver’s door is opened on vehicles equipped with the optional keyless drive).

05 Infotainment

Bluetooth® hands-free connection

When the cell phone is disconnected from the hands-free system, a call in progress can be continued using the cell phone’s own speaker and microphone. Even if the cell phone has been disconnected manually, some phones may reconnect auto- matically to the most recently used hands-free unit, for example when a new call is initiated.

Handling calls

Incoming calls ± Press OK/MENU (or the thumb wheel on

the steering wheel keypad) to answer a call, even if the infotainment system is cur- rently in another mode (e.g., RADIO or MEDIA).

Press EXIT to reject a call.

05

Automatic answer This function means that incoming calls will be answered automatically. Activate or deactivate the function in the menu system under Phone menu

Auto answer.

Call options

Call settings While a call is in progress, press OK/MENU or the thumb wheel on the steering wheel keypad to access the following functions:

``

231

05 Infotainment

Bluetooth® hands-free connection

• Mute: mute the infotainment system’s

microphone.

• Mobile phone: transfer the call from

hands-free to the cell phone. On certain cell phones, the connection will be broken, which is normal. The hands-free function will ask if you would like to reconnect.

• Dial number: dial a third party during an ongoing call using the number keys (the current call will be put on hold).

Call lists Call lists are copied to the hands-free function each time a cell phone is connected and the lists are updated while the phone is connected. In normal view, turn TUNE counter-clockwise to see the All calls list. In phone mode, the various call lists can be displayed in Phone menu • All calls • Missed calls • Answered calls • Dialed calls (certain cell phones show this

Call lists:

list in reverse order)

• Call duration If no number has been stored, this menu can be accessed by pressing and holding 1.

1 Not supported by all cell phones.

05

232

Voice mail In normal view, a speed dial number for voice mail can be programmed and accessed by pressing and holding 1. The number for voice mail can be changed in phone mode in Phone menu Call options

Voicemail number

Change number.

volume and adjust the volume by turning VOL. Save the setting by pressing EXIT.

Ringing tones The hands-free system’s integrated ringing tones can be selected in Phone menu Phone settings Ring signals

Sounds and volume

Ring signal 1, etc.

Sound settings

NOTE

Call volume Call volume can be only be adjusted during a call. Use the buttons in the steering wheel key- pad or the infotainment system’s VOL control.

Infotainment system volume If no phone call is in progress, volume for the infotainment system can be adjusted in the normal way with the infotainment system's VOL control or from the steering wheel keypad. Infotainment system sound can be automati- cally muted when a phone call is received in Sounds Phone menu and volume Mute radio/media.

Phone settings

Ringing volume In phone mode, go to Phone menu settings

Sounds and volume

Phone

Ring

The connected cell phone’s ring tone may not be switched off when one of the hands- free system's ringing tones is used.

If you prefer to use the connected cell phone’s ring tone1, go to Phone menu settings signals Mobile phone ring signal.

Sounds and volume

Phone Ring

More information about pairing and connecting cell phones A maximum of 10 cell phones can be paired with the hands-free system. Pairing only needs to be done once for each phone. After pairing, the cell phone no longer needs to be in sight or discoverable. Only one cell phone can be actively connected to hands-free at a time.

Phone book The hands-free system uses two phone books (one with the cell phone's list of contacts and one with contacts saved directly in the info- tainment system), which are combined to form one phone book. • The infotainment system downloads the

phone book from a connected cell phone. This phone book will only be displayed when this cell phone is connected to the hands-free system.

• The infotainment system also has an inte- grated phone book made up of contacts that have been saved in the system, regardless of which cell phone is currently connected when the contact is saved. These contacts will be displayed regard- less of the cell phone that is connected. If a contact has been saved in the infotain- symbol will be dis- ment system, the played next to it.

Automatic connection When the hands-free system is active and the most recently connected cell phone is within range, it is connected automatically. If this phone is not within range, the hands-free sys- tem will attempt to connect one of the other paired cell phones. When the infotainment sys- tem searches for the most recently connected phone, this phone’s name appears in the dis- play.

Manual connection To connect a phone other than the one that was most recently connected or to switch between cell phones that are already paired with the hands-free system, go to Phone menu

Change phone.

Removing a paired phone from the list In phone mode, a paired phone can be removed from the list of phones in Phone menu

Remove Bluetooth device.

Bluetooth(cid:159)(cid:159) version For information about the Bluetooth(cid:159) version installed in the vehicle, go to Phone menu Phone settings version in car.

Bluetooth software

05 Infotainment

Bluetooth® hands-free connection

NOTE

Changes made from the infotainment sys- tem to a contact in the cell phone's phone book will result in a new contact being added to the infotainment system's phone book. However, this contact will not be saved in the cell phone's phone book. The infotainment system's display will show duplicate contacts with different icons. Please also note that if a speed dial number is saved or if a contact's information is edi- ted, this will result in a new contact in the infotainment system's phone book.

The symbol must be displayed before the phone book can be used and the hands- free function must be in phone mode. The infotainment system saves a copy of each paired cell phone's phone book. This phone book can be copied each time the phone is connected. ± Activate/deactivate this function in phone Phone settings

mode in Phone menu

Download phone book.

If the phone book contains information about someone who is trying to call you, this infor- mation will be shown in the display.

05

``

233

05 Infotainment

Bluetooth® hands-free connection

Contact shortcuts A quick way of searching the phone book for contacts in normal view is to turn TUNE clock- wise to access the phone book and then coun- ter-clockwise to select a contact from the list. Press OK/MENU to call. Each name in the phone book has a default symbol is displayed to phone number. If the the right of it, this indicates that there are addi- tional phone numbers for this contact. To use a phone number other than the default one, press the button on the center console control panel. Turn TUNE to select a different phone number and press OK/MENU to call. It is also possible to search for a contact by using the center console keypad to enter the first letter(s) of the contact's name (see also the following table "Buttons in the center console" for each button's function). The list of contacts can also be accessed from normal view by pressing and holding the button on the center console keypad with the first let- ter of the contact's name. For example, press- ing and holding button 6 would provide direct access to the section of the list with contacts whose names begin with M.

05

234

Buttons in the center console Button Function

Space . , - ? @ : ; / ( ) 1

A B C Å Ä Æ À Ç 2

Searching for contacts

D E F È É 3

G H I Ì 4

J K L 5

M N O Ö Ø Ñ Ò 6

P Q R S ß 7

T U V Ü Ù 8

W X Y Z 9

Shift between upper and lower case

+ 0 p w

# *

Searching for contacts using the text wheel

List of characters

Switch between character entry modes (see the following table) Phone book (list of contacts)

Phone book

To search for or edit a contact in phone mode, go to Phone menu Search. 1. Turn TUNE to the desired letter and press OK/MENU to confirm. The number/letter keys on the center console can also be used.

2. Continue to the next letter, etc. The results of the search will be displayed in the phone book (3).

3. To switch from letter entry mode to the

entry mode for numbers or special charac- ters, or to go to the phone book, turn TUNE to one of the selections (see the explanation in the following table) in the list for switching character entry mode (2) and press OK/MENU.

Character entry modes

123/ ABC

More

Toggle between letters and num- bers by pressing OK/MENU.

Switch to special characters by pressing OK/MENU.

This leads to the phone book (3). Turn TUNE to select a contact and press OK/MENU to display the contact's information.

Press EXIT briefly to erase a single character. Press and hold EXIT to erase all of the char- acters that have been entered. If a number button on the center console is pressed while the text wheel is displayed, a list of characters (1) will be displayed. Briefly press the button once to enter its first letter, twice to enter the second letter, etc. Continue to press the button to display other characters. Con- tinue with the next character, etc. To enter a number, press and hold the button.

Adding a new contact

Enter the name of a new contact

Switch between character entry modes (see the following table) Character entry field

New contacts can be added in phone mode in Phone menu contact. 1. When Name is highlighted, press OK/

Phone book

New

MENU to go to the character entry mode (see the illustration).

2. Turn TUNE to the desired letter and press OK/MENU to confirm. The number/letter keys on the center console can also be used.

05 Infotainment

Bluetooth® hands-free connection

3. Continue to the next letter, etc. The name entered will be displayed in the character entry field (2).

4. To switch from letter entry mode to the

entry mode for numbers or special charac- ters, or to toggle between upper and lower case letters, etc., turn TUNE to one of the selections (see the explanation in the fol- lowing table) in the list (1) and press OK/ MENU.

When you have finished entering the name, select OK in the list in the display (1) and press OK/MENU. Continue by entering the phone number in the same way. When you have entered the phone number, press OK/MENU and select a tag for the num- ber (Mobile phone, Home, Work or General). Press OK/MENU to confirm. When all of the contact's information has been entered, select Save contact in the menu to save.

123/ ABC

More

OK

Toggle between letters and num- bers by pressing OK/MENU.

Switch to special characters by pressing OK/MENU.

Save and return to Add contact by pressing OK/MENU.

05

``

235

is activated in Phone menu

Phone book

Receive vCard.

Memory status In phone mode, the memory status of the info- tainment system's phone book and the con- nected cell phone's phone book can be seen in Phone menu Phone book Memory status.

Clearing the phone book In phone mode, all entries in the infotainment system's phone book can be cleared in Phone Clear phone book. menu

Phone book

NOTE

Clearing the entries in the infotainment sys- tem's phone book does not delete entries in the cell phone's phone book.

05 Infotainment

Bluetooth® hands-free connection

Toggle between upper and lower case letters by pressing OK/ MENU.

Press OK/MENU and the cursor will move to the character entry field (2) at the top of the display. The cursor can now be moved by turning TUNE to a position where new characters can be entered or deleted by pressing EXIT. In order to add characters, return to text entry mode by pressing OK/ MENU.

Phone book

Speed dial Speed dial numbers can be added in phone mode in Phone menu Speed dial. To use speed dial to make a call in phone mode, press a button on the center console keypad followed by OK/MENU. If a contact has not been saved on the speed dial number used, you will be prompted to save a contact on the number selected.

Accept vCards vCards from other cell phones can be added to the infotainment system's phone book. To ena- ble this feature, put the infotainment system in discoverable mode for Bluetooth(cid:159). The feature

05

236

05 Infotainment

Cell phone voice control

WARNING

Getting started

As the driver, you have full responsibility for operating the vehicle safely and adhering to all applicable traffic regulations.

The voice control feature provides access to a number of functions in the Bluetooth(cid:159) hands- free and navigation systems while allowing you to keep your hands on the steering wheel. Input is in dialogue form using spoken commands from the user and verbal prompts from the sys- tem. Voice control uses the same microphone as the Bluetooth(cid:159) hands-free system (see the illustration on page 229) and system prompts are provided through the infotainment sys- tem's front speakers.

Introduction The infotainment system's voice control fea- ture1 enables the driver to voice-activate cer- tain functions in a Bluetooth(cid:159)-connected cell phone or the navigation system.

NOTE

• The information in this section applies to using voice commands to operate a Bluetooth(cid:159)-connected cell phone. See also the section "Bluetooth(cid:159) hands-free connection" beginning on page 229 for detailed information about using a cell phone with the vehicle's infotainment system.

• The navigation system has a separate

user's guide containing information about voice commands for operating that system.

Voice commands offer convenience and help avoid distractions so that you can concentrate on driving and focus your attention on road and traffic conditions.

1 Available in vehicles equipped with the optional Volvo Navigation System only

Voice control button on the steering wheel

Activating the system Before any phone voice commands can be used, a Bluetooth(cid:159)-enabled cell phone must be paired with the infotainment system. If a phone command is given, the system will inform you If there is no cell phone paired. See page 230 for information on pairing a cell phone. Press the voice control button (1 in the illustra- tion) to activate the system and initiate a com- mand dialogue. The system will display com- monly used commands on the screen when the button has been pressed.

05

``

237

05 Infotainment

Cell phone voice control

While using the voice control system, keep the following points in mind: • When giving commands, speak at your

usual speed and in a normal tone of voice after the tone

• The vehicle's doors, windows and moon- roof should be closed when using the voice control system

• Avoid background noises in the cabin

when using the system

NOTE

If you are uncertain of the commands that you can use, saying "help" will prompt the system to provide a number of commands that can be used in a specific situation. Voice control commands can be cancelled by: • Saying "cancel" • Not speaking • Pressing and holding the voice control

button

• Pressing EXIT or one of the mode but-

tons (RADIO, MEDIA, etc.).

05

238

Voice control support features • Tutorial: A feature that helps acquaint you with the system and the procedure for giv- ing commands.

• Training: A feature that enables the voice

control system to become familiar with your voice and pronunciation, and allows you to set up user profiles. Two user pro- files can be voice trained.

These support features are accessed by press- ing the MY CAR button in the center console and turning TUNE to scroll to the desired menu selection. Tutorial The tutorial feature can be started in two ways:

NOTE

The tutorial feature can only be started when the vehicle is parked and the parking brake is applied.

• By pressing the voice control button and

saying "Voice tutorial."

• By pressing MY CAR and going to

Voice settings

Settings tutorial. Press OK/MENU to begin the tutorial lesson.

Voice

The tutorial is divided into three lessons, which take a total of approximately 5 minutes to com- plete. By default, the system will begin with the first lesson. To skip to the next lesson, press the voice control button and say "next." Go back to a previous lesson by saying "previous." Press and hold the voice control button to exit the tutorial. Training The system will display up to fifteen phrases for you to say. To start the voice training proce- dure, press MY CAR and go to Settings Voice settings 1 or User 2 and press OK/MENU to begin. After the training has been completed, remem- ber to set your user profile in Voice user setting.

Voice training. Select User

Other voice control settings found in MY CAR • Voice user setting: Two user profiles can be set by pressing MY CAR and going to Settings Voice user setting. Select User 1 or User 2.

Voice settings

• Voice output volume: Press MY CAR and go to Settings Voice output volume. Press OK/MENU and turn TUNE to raise or lower the volume. Press EXIT to save the change and exit the menu.

Voice settings

Using voice commands The driver initiates a voice command dialogue by pressing the voice control button (see the illustration on page 237). When a dialogue has been initiated, commonly used commands will be shown in the display. Grayed-out texts or texts in parentheses are not part of the spoken command. Once you become familiar with the system, you can speed up the command dialogue by briefly pressing the voice control button to skip prompts from the system. Commands can be given in several ways. For example, the command "Phone call con- tact" can be spoken as: • "Phone > Call contact"—say "Phone," wait for a system response, and then continue by saying "Call contact."

• "Phone call contact"—give the entire com-

mand at one time

The following is a list of features that can be voice-controlled with a Bluetooth(cid:159)-connected cell phone.

Shortcuts Shortcut commands for using the phone can be found in the MY CAR menu system, under Settings command list

Phone commands and

Voice settings

Voice

05 Infotainment

Cell phone voice control

General commands. See page 127 for more information on the menu system.

"Delete" (which will erase the entire phone number).

Dialing a number The system understands the digits zero to nine. These numbers can be spoken individually, in groups of several digits at a time, or the entire number can be given at once. Numbers above nine will not be recognized. The following is an example of a voice com- mand dialogue. The system's response may vary depending on the situation. The user initiates the dialogue by saying: Phone > dial number or Phone dial number System response Number please User action Begin saying the digits in the phone number. If you say several digits and pause, the system will repeat them and prompt you by saying "Continue." Continue saying the digits. When you have fin- ished, complete the command by saying "Dial." • You can also change the number by using the commands "Correction" (which dele- tes the last group of digits spoken) or

Dialing from a call list The dialogue below enables you make a call from one of your cell phone's call lists. The user initiates the dialogue by saying: Phone > dial from call list or Phone dial from call list Continue by responding to the system's prompts.

Calling a contact The dialogue below enables you to call the pre- defined contacts in your cell phone. See the phone's user's guide if necessary. The user initiates the dialogue by saying: Phone > call contact or Phone call contact Continue by responding to the system's prompts. When calling contacts, keep the following in mind: • If there are several contacts with similar names, they will be presented in the dis-

05

``

239

05 Infotainment

Cell phone voice control

play in numbered lines and the system will prompt you to pick a line number

• If there are more lines in the list than can be displayed at one time, saying "Down" will enable you to scroll downward in the list (and saying "up" will take you back up through the list).

Dialing voicemail The dialogue below enables you to call your voicemail to check any messages that you may have received. Your voicemail phone number must be registered in the Bluetooth(cid:159) function, see page 232. The user initiates the dialogue by saying: Phone > dial voicemail or Phone dial voicemail Continue by responding to the system's prompts.

05

240

Overview

05 Infotainment

Rear Seat Entertainment (RSE)*

Screen: channel A (left), channel B (right)

Headphone socket

On/Off button

A/V-AUX socket

Remote control

Headphones

IR transceiver

Introduction The RSE system provides entertainment for the rear seat passengers by making it possible to e.g., watch a film, play music, listen to the radio or connect an external device such as a game console. RSE is fully integrated into the vehicle's info- tainment system and can be used at the same time as other infotainment features. For example, if a rear seat passenger is using A/V-AUX and headphones, the driver and front seat passenger can still use the vehicle's radio or media player. However, only one disc can be played in the media player at a time. You can

listen to music from e.g., an iPod(cid:159) or from streaming audio files using the Bluetooth(cid:159) function. The RSE system can be controlled from the front screen (parental control). Different media can be played or viewed from different sources on the various screens (front center console and/or the respective screens in the rear seat). It is also possible to play or view media from the same source on one or more of the screens. However, it is not possible to play a film from USB while a CD or DVD is being played.

05

``

* Option/accessory, for more information, see Introduction.

241

05 Infotainment

Rear Seat Entertainment (RSE)*

CAUTION

When transporting large objects in the rear seat, be sure that there is adequate space between the object(s) and the RSE screens to help avoid scratching or damaging these screens. If necessary, cover the screens with a suit- able material.

NOTE

• The RSE screens and remote control