2015 Toyota RAV4 Owners Manual

Download PDF Manual
5-2. Using the audio system Changing the passkey Select “Passkey” using the “TUNE•SCROLL” knob. Select a 4 to 8-digit passkey using the knob. Input the number 1 digit at a time. When the entire number to be registered as a passkey has been input, press If the passkey to be registered has 8 digits, pressing necessary. (ENTER) is not (ENTER). Setting automatic connection of the device on or off If “BT power” is set to on, the registered device will be connected automatically when the engine switch is turned to the “ACC” position (vehicles without a smart key system) or ACCESSORY mode (vehi- cles with a smart key system). Select “BT Power” using the “TUNE•SCROLL” knob. Select “ON” or “OFF” using the knob. Displaying the device status Select “Bluetooth* info” using the “TUNE•SCROLL” knob. ● Displaying the device name Select “Device name” using the “TUNE•SCROLL” knob. ● Displaying the device address Select “Device address” using the “TUNE•SCROLL” knob. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RAV4_OM_OM42A17U_(U) 5-2. Using the audio system 381 Setting the automatic connection confirmation display to on or off If the “Display setting” is set to on, the portable player connection sta- tus will be displayed when the engine switch is turned to the “ACC” or “ON” position (vehicles without a smart key system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key system). Select “Display setting” using the “TUNE•SCROLL” knob. Select “ON” or “OFF” using the knob. Initialization Select “Initialize” using the “TUNE•SCROLL” knob. ● Initializing the sound settings Select “Sound setting” using the “TUNE•SCROLL” knob and press (YES). For details about sound settings: P. 382 ● Initializing the device information Select “Car device info” using the “TUNE•SCROLL” knob and press (YES). Automatic connection of a portable device, automatic connection confirma- tion display and the passkey will be initialized. ● Initializing all the settings Select “All initialize” using the “TUNE•SCROLL” knob and press (YES). ■The number of Bluetooth® device that can be registered Up to 5 Bluetooth® device can be registered in the system. ■Bluetooth® audio/phone system functions Certain functions may not be available during driving. RAV4_OM_OM42A17U_(U) 5-2. Using the audio system 382 Using the “SETUP” menu (“PHONE” menu) ■ Functions and operation procedures To enter the menu for each function, press the “SETUP” button and follow the steps below using the “TUNE•SCROLL” knob: ● Adding a new phone number 1. “PHONE”  2. “Phonebook”  3. “Add contacts” ● Setting speed dials 1. “PHONE”  2. “Phonebook”  3. “Add SD” ● Deleting call histories 1. “PHONE”  2. “Phonebook”  3. “Delete call history” ● Deleting a registered phone number 1. “PHONE”  2. “Phonebook”  3. “Delete contacts” ● Deleting another cellular phone’s phonebook 1. “PHONE”  2. “Phonebook”  3. “Delete other PB” ● Setting call volume 1. “PHONE”  2. “HF sound setting”  3. “Call volume” ● Setting ring tone volume 1. “PHONE”  2. “HF sound setting”  3. “Ringtone volume” ● Setting ring tone 1. “PHONE”  2. “HF sound setting”  3. “Ringtone” ● Transferring call histories 1. “PHONE”  2. “Transfer histories” ● Setting automatic transferring of the phonebook 1. “PHONE”  2. “Auto transfer” : If equipped RAV4_OM_OM42A17U_(U) 5-2. Using the audio system 383 Adding a new phone number Select “Add contacts” using the “TUNE•SCROLL” knob. ● Transferring all contacts from the cellular phone Select “Overwrite all” using the “TUNE•SCROLL” knob and press (YES). ● Transferring one contact from the cellular phone Select “Add one contact” using the “TUNE•SCROLL” knob and press (YES). Setting speed dials Select “Add SD” using the “TUNE•SCROLL” knob. Select the desired data using the knob. Press the desired preset button (from For details about setting speed dials from the call history: P. 374 For details about deleting speed dials: P. 373 [1] to [5]). RAV4_OM_OM42A17U_(U) 384 5-2. Using the audio system Deleting call histories Select “Delete call history” using the “TUNE•SCROLL” knob. ● Deleting outgoing call history Select “Outgoing calls” using the “TUNE•SCROLL” knob. Select the desired phone number using the knob and press (YES). To delete all outgoing call history data, press press (YES). (ALL) and then ● Deleting incoming call history Select “Incoming calls” using the “TUNE•SCROLL” knob. Select the desired phone number using the knob and press (YES). To delete all incoming call history data, press press (YES). (ALL) and then ● Deleting missed call history Select “Missed calls” using the “TUNE•SCROLL” knob. Select the desired phone number using the knob and press (YES). To delete all missed call history data, press press (YES). (ALL) and then ● Deleting a number from all call histories (Outgoing calls, Incoming calls and Missed calls) Select “All calls” using the “TUNE•SCROLL” knob. Select the desired phone number using the knob and press (YES). To delete all of the call histories data, press press (YES). (ALL) and then RAV4_OM_OM42A17U_(U) 5-2. Using the audio system 385 Deleting a registered phone number Select “Delete contacts” using the “TUNE•SCROLL” knob. Select the desired phone number using the knob and press (YES). To delete all the registered phone numbers, press press Press of the initial. (YES). (A-Z) to display the registered names in alphabetical order (ALL) and then Deleting another cellular phone’s phonebook Select “Delete other PB” using the “TUNE•SCROLL” knob. Select the desired phonebook using the knob and press (YES). Setting automatic transferring of the phonebook on or off Select “Auto transfer” using the “TUNE•SCROLL” knob. Select “ON” or “OFF” using the knob. Setting call volume Select “Call volume” using the “TUNE•SCROLL” knob. Change the call volume. To decrease the volume: Turn the knob counterclockwise. To increase the volume: Turn the knob clockwise. To set the volume, press (SAVE). Setting ring tone volume Select “Ringtone volume” using the “TUNE•SCROLL” knob. Change the ring tone volume. To decrease the volume: Turn the knob counterclockwise. To increase the volume: Turn the knob clockwise. To set the volume, press (SAVE). RAV4_OM_OM42A17U_(U) 386 5-2. Using the audio system Setting ring tone Select “Ringtone” using the “TUNE•SCROLL” knob. Using the knob, select a ring tone (1 - 3). To set the selected ring tone, press (SAVE). Transferring call histories Select “Transfer histories” using the “TUNE•SCROLL” knob and press (YES). ■Phone number Up to 1000 names can be stored. ■Call history Up to 10 numbers can be stored in each of the outgoing, incoming and missed call history memories. ■Limitation of number of digits A phone number that exceeds 24 digits cannot be registered. ■Bluetooth® phone system functions Certain functions may not be available during driving. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 387 Audio system Operations such as listening to audio, using the hands-free phone, confirming vehicle information and changing audio sys- tem settings are started by using the following buttons. Audio system operation buttons “AUDIO” button Display the “Select Audio Source” screen or audio top screen. (P. 403) “CAR” button Press this button to access the vehicle information system. (P. 92) button Press this button to access the Bluetooth® hands-free system. (P. 442) “SETUP” button Press this button to customize the function settings. (P. 394) : If equipped RAV4_OM_OM42A17U_(U) 388 5-3. Using the audio system (Entune Audio) Operating the touch screen By touching the screen with your finger, you can control the audio sys- tem, etc. ■ Touch Quickly touch and release once. ● Changing and selecting various settings ■ Drag* Touch the screen with your finger, and move the screen to the desired position. ● Scrolling the lists ■ Flick* Touch the screen with your finger and quickly move the screen by flicking your finger. ● Moving the list screen (list screen limit) *: The above operations may not be performed on all screens. ■When using the touch screen ●If the screen is cold, the display may be dark, or the system may seem to be operating slightly slower than normal. ●The screen may seem dark and hard to see when viewed through sun- glasses. Change your angle of viewing, adjust the display on the “Display Settings” screen (P. 400) or remove your sunglasses. NOTICE ■To avoid damaging the touch screen ●To prevent damaging the screen, lightly touch the screen buttons with your finger. ●Do not use objects other than your finger to touch the screen. ●Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 389 Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system. Operating the audio system using the steering wheel switches 12 Volume switch • Increases/decreases volume • Press and hold: Continuously increases/decreases volume Enter switch • Displays the audio screen (Except when audio screen is displayed) • Displays preset/list screen (When audio screen is displayed) the • Selects items (When audio list screen is displayed) Cursor switch “”and “” button • Selects (radio stations/tracks/files/songs/videos) • Moves cursor • Press and hold: Fast preset/station up/down Fast track up/down (tracks/files/songs) “”and “” button • Tab change • Press and hold: Seek up/down (radio stations) Fast up/down (tracks/files/videos) : If equipped RAV4_OM_OM42A17U_(U) 390 5-3. Using the audio system (Entune Audio) Back switch • Returns to the previous screen (Only when “Back button” is dis- played) “MODE/HOLD” switch • Changes audio source • Press and hold this switch to mute or pause the current operation To cancel the mute or pause, press and hold. CAUTION ■To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 391 USB Port/AUX Port Connect an iPod, USB memory device or portable audio player to the USB/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the audio source selection screen and the device can be operated via audio system. Connecting using the USB/AUX port ■ iPod Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. ■ USB memory Open the cover and connect the USB memory device. Turn on the power of the USB memory device if it is not turned on. ■ Portable audio player Open the cover and connect the portable audio player. Turn on the power of the portable audio player if it is not turned on. CAUTION ■While driving Do not connect a device or operate the device controls. RAV4_OM_OM42A17U_(U) 392 5-3. Using the audio system (Entune Audio) Basic Audio Operations Basic audio operations and functions common to each mode are explained in this section. Operating the audio system Press this knob to turn the audio system on and off, and turn it to adjust the volume. Press this button to eject a disc Insert a disc into the disc slot Press to pause or resume play- ing music. Turn this knob to select radio station bands, tracks and files. Also the knob can be used to select items in the list display. Press the button to seek up or down for a radio station, or to access a desired track or file. : Select to pause music. : Select to resume play- ing music. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 393 Random playback Select to change on/off. Repeat play Select to change on/off. ■Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. CAUTION ■Laser product This product is a class 1 laser product. Do not open the cover of the player or attempt to repair the unit yourself. Refer servicing to qualified personnel. ●Laser products • Do not take this unit apart or attempt to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassem- ble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages. • This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. NOTICE ■To prevent battery discharge Do not leave the audio system on longer than necessary when the engine is off. ■To avoid damaging the audio system Take care not to spill drinks or other fluids on the audio system. RAV4_OM_OM42A17U_(U) 394 5-3. Using the audio system (Entune Audio) Setup menu You can adjust the audio system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen ani- mation, etc. (P. 395) Select to display the voice set- tings screen. (P. 402) Select to adjust the settings for contrast and brightness of the screen. (P. 400) Select to adjust the settings for registering, removing, connecting and disconnecting Bluetooth® devices. (P. 438) Select to adjust the settings for contact, message settings, etc. (P. 460) Select to set audio settings. (P. 399) Select to turn the screen off. Select to set the vehicle customization (P. 687). RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 395 General settings Settings are available for adjusting the operation sounds, screen animation, etc. Screen for general settings Press the “SETUP” button. Select “General” on the “Setup” screen. 10 11 or “Français” “English”, “Español” can be selected. On/off can be selected to sound beeps. Select to change the screen color. Select to change the key- board layout. Select to set automatic screen changes from the audio control screen to the home screen on/off. When set to on, the screen will automatically return to the home screen from the audio control screen after 20 seconds. The animation effect for the screen can be set to on/off. Select to customize the startup images. (P. 396) Select to customize the screen off images. (P. 396) Select to delete personal data (P. 398) Select to update program versions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.) ■To return to the default settings Select “Default”, and then “Yes”. RAV4_OM_OM42A17U_(U) 396 5-3. Using the audio system (Entune Audio) Customizing the startup and screen off images (if equipped) An image can be copied from a USB memory and used as the startup and screen off Images. When the engine switch is in the “ACC” or “ON” position (vehicles without a smart key system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the initial screen will be displayed. When “Screen Off” on the “Setup” screen is selected, the screen is turned off and the desired screen off image that is set is displayed. (To turn the screen off: P. 394) ■ Transferring images Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on. Press the “MENU” button. Select “Setup”. Select “General”. Select “Customize Startup Image” or “Customize Screen Off Image”. Select “Transfer”. Select “Yes”. ● When saving the images to a USB, name the folder that the star- tup image is saved to “StartupImage” and name the folder that the screen off image is saved to “DisplayOffImage”. If these folder names are not used, the audio system cannot download the images. (The folder names are case sensitive.) ● The compatible file extensions are JPG and JPEG. ● Image files of 5 MB or less can be transferred. ● Up to 3 images can be transferred to the audio system. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 397 ■ Setting the startup images Display the “General Settings” screen. (P. 395) Select “Customize Startup Image”. Select the desired image. Select “OK”. ■ Setting the screen off images Display the “General Settings” screen. (P. 395) Select “Customize Screen Off Image”. Select the desired image. Select “OK”. ■ Deleting transferred images Display the “General Settings” screen. (P. 395) Select Image” Screen Off Image”. Select “Delete All”. “Customize Startup “Customize or Select “Yes”. RAV4_OM_OM42A17U_(U) 398 5-3. Using the audio system (Entune Audio) Delete personal data Select “Delete Personal Data” on the “General Settings” screen. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. A confirmation screen will be displayed. Select “Yes”. The following personal data will be deleted or changed to its default settings. • General settings • Audio settings • Phone settings RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 399 Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings Press the “SETUP” button. Select “Audio” on the “Setup” screen. Number of Radio Presets Select the number of radio preset stations. Display Cover Art on/off Automatic Sound Levelizer (P. 399) Automatic sound leveliser (ASL) Select “Automatic Sound Levelizer”. Select “High”, “Mid”, “Low” or “Off”. ■The sound quality level is adjusted individually The treble, mid and bass levels can be adjusted for each audio mode sepa- rately. ■About Automatic Sound Leveliser (ASL) ASL automatically adjusts the volume and tone quality according to the vehi- cle speed. RAV4_OM_OM42A17U_(U) 400 5-3. Using the audio system (Entune Audio) Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust the screen display Adjust the camera display* Changes to day mode. *: If equipped Day mode When the headlights are turned on, the screen dims. However, the screen can be switched to day mode by selecting “Day Mode”. The screen will stay in day mode when the headlights are turned on until “Day Mode” is selected again. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 401 Brightness, contrast, tone and color adjustment Select “General” or “Camera” on the “Display Settings” screen. Select the desired item. “Brightness” “Contrast” “-” Darker Weaker “+” Brighter Stronger RAV4_OM_OM42A17U_(U) 402 5-3. Using the audio system (Entune Audio) Voice settings This screen is used for setting the voice command guidance system. the voice recognition Adjust the voice guidance vol- ume setting. Set prompts “High”, “Low” or “Off”. Train voice recognition Set the voice prompt interrupt on/off. Voice recognition tutorial ■To return to the default settings Select “Default”, and then “Yes”. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 403 Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Changing audio source Press the “AUDIO” button to display the audio source selection screen. If the audio source selection screen is not displayed, press the “AUDIO” button again. Select source. the desired audio the desired audio to or Select source then reorder. Using the steering wheel switches to change audio source The audio source changes as follows each time the “MODE/HOLD” switch is pressed. RAV4_OM_OM42A17U_(U) 404 5-3. Using the audio system (Entune Audio) List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display. Select this button to scroll the title. Turn the “TUNE•SCROLL” knob to move the cursor box to select a desired item from the list, and press the knob to play it. The track that is being played is highlighted. To return to the top screen, select “Now Playing” on the list screen. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 405 Selecting, fast-forwarding and reversing tracks/files/songs ■ Selecting a track/file/song Press the “SEEK >” button or “< TRACK” button, or turn the “TUNE•SCROLL” knob to select the desired track/file/song number. To fast-forward or reverse, press and hold the “SEEK >” button or “< TRACK” button. ■ Selecting a track/file/song from the track/file/song list Select “Browse” or cover art. Select the desired track/file/ song. When an MP3/WMA/AAC disc or USB memory device is being used, the folder can be selected. When a Bluetooth® device or iPod is being used, the album can be selected. According to the audio device, the following is displayed. Audio source List name Audio CD MP3/WMA/AAC disc, USB Bluetooth® iPod Track Folder, Album, Artist, Song, Composer, Genre, File Album, Track Playlist, Artist, Album, Genre, Audiobook, Composer, Song, Video, Podcast RAV4_OM_OM42A17U_(U) 406 5-3. Using the audio system (Entune Audio) Optimal use of the audio system On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5. Select “Front” or “Rear” to adjust the front/rear audio balance. Select “L” or “R” to adjust the left/right audio balance. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 407 Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Preset stations Scanning for receivable station Select to display a list of receiv- able stations Setting the sound (P. 406) Selecting a station Tune in to the desired station using one of the following methods. ■ Seek tuning Press the “SEEK >” button or “< TRACK” button. The radio will begin seeking up or down for a station of the nearest frequency and will stop when a station is found. ■ Manual tuning Turn the “TUNE•SCROLL” knob. ■ Preset stations Select the desired preset station. RAV4_OM_OM42A17U_(U) 408 5-3. Using the audio system (Entune Audio) Setting station presets Search for desired stations by turning the “TUNE•SCROLL” knob or pressing the “SEEK >” button or “< TRACK” button. Select “(add new)”. To change the preset station to a different one, select and hold the preset station. Select “Yes”. Select “OK” after setting the new preset station. ■ Refreshing the station list Select “Refresh” on the “Station List” screen. To cancel the refresh, select “Cancel Refresh”. ■Reception sensitivity ●Maintaining perfect radio reception at all times is difficult due to the continu- ally changing position of the antenna, differences in signal strength and sur- rounding objects, such as trains, transmitters, etc. ●The radio antenna is mounted on the roof. The antenna can be removed from the base by turning it. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 409 CD player operation Insert disc or select “CD” on the audio source selection screen with a disc inserted to begin listening to a CD. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Displaying the track/file list Random playback (P. 393) Repeat play (P. 393) Pause Select Setting the sound (P. 406) to resume play RAV4_OM_OM42A17U_(U) 410 5-3. Using the audio system (Entune Audio) ■Displaying the title and artist name If a CD-TEXT disc is inserted, the title of the disc and track will be displayed. ■Error messages If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause • The disc is dirty or damaged. Correction procedures • Clean the disc. • Insert the disc cor- • The disc is inserted rectly. upside down. • The disc is not play- able with the player. • Confirm the disc is the playable with player. “Check DISC” “Disc Error” There is a malfunction within the system. Eject the disc. “No music files found.” No playable data included on the disc. is Eject the disc. ■Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. CDs with copy-protection features may not play correctly. ■CD player protection feature To protect the internal components, playback is automatically stopped when a problem is detected. ■If a disc is left inside the CD player or in the ejected position for extended periods Disc may be damaged and may not play properly. ■Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 411 ■MP3, WMA and AAC files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 for- mat. AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG2 and MPEG4. MP3, WMA and AAC file and media/formats compatibility are limited. ●MP3 file compatibility • Compatible channel modes: stereo, joint stereo, dual channel and mon- • Compatible standards MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3) • Compatible sampling frequencies MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz) • Compatible bit rates (compatible with VBR) MPEG1 LAYER3: 32-320 (kbps) MPEG2 LSF LAYER3: 8-160 (kbps) aural ●WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) Ver. 7, 8: CBR 48-192 (kbps) Ver. 9: CBR 48-320 (kbps) • Compatible bit rates (only compatible with 2-channel playback) RAV4_OM_OM42A17U_(U) 412 5-3. Using the audio system (Entune Audio) ●AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz) • Compatible bit rates 16-320 (kbps) ●Compatible media Media that can be used for MP3, WMA and AAC playback are CD-Rs and CD-RWs. Playback in some instances may not be possible if the CD-R or CD-RW is not finalized. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints. ●Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 • File formats: CD-ROM XA Mode 2, Form 1 and Form 2 ISO9660 Level 1, Level 2, (Romeo, Joliet) UDF (2.01 or lower) MP3, WMA and AAC files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly. Items related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels (including the root) • Maximum length of folder names/file names: 32 characters • Maximum number of folders: 192 (including the root) • Maximum number of files per disc: 255 ●File names The only files that can be recognized as MP3/WMA/AAC and played are those with the extension .mp3, .wma or .m4a. ●Discs containing multi-session recordings As the audio system is compatible with multi session discs, it is possible to play discs that contain MP3, WMA and AAC files. However, only the first session can be played. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 413 ●ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags. AAC tags can be added to AAC files, making it possible to record the track title and artist name in the same way as with ID3 tags. ●MP3, WMA and AAC playback When a disc containing MP3, WMA or AAC files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3, WMA or AAC file is played. To make the file check finish more quickly, we recom- mend you do not write any files to the disc other than MP3, WMA or AAC files or create any unnecessary folders. Discs that contain a mixture of music data and MP3, WMA or AAC format data cannot be played. ●Extensions If the file extensions .mp3, .wma and .m4a are used for files other than MP3, WMA and AAC files, they may be mistakenly recognized and played as MP3, WMA and AAC files. This may result in large amounts of interfer- ence and damage to the speakers. ●Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc. • There is a wide variety of freeware and other encoding software for MP3, WMA and AAC files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all. • When files other than MP3, WMA or AAC files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all. • Microsoft, Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S.A. and other countries. RAV4_OM_OM42A17U_(U) 414 5-3. Using the audio system (Entune Audio) NOTICE ■Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, DualDiscs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. ●Discs that have a diameter that is not 4.7 in. (12 cm). ●Low-quality or deformed discs. ●Discs with a transparent or translucent recording area. ●Discs that have tape, stickers or CD-R labels attached to them, or that have had the label peeled off. ■Player precautions Failure to follow the precautions below may result in damage to the discs or the player itself. ●Do not insert anything other than discs into the disc slot. ●Do not apply oil to the player. ●Store discs away from direct sunlight. ●Never try to disassemble any part of the player. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 415 Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen. Connecting an iPod P. 391 Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Displays cover art Selecting the play mode (P. 416) Shuffle play (P. 416) Repeat play (P. 416) Pause Select Setting the sound (P. 406) to resume playback RAV4_OM_OM42A17U_(U) 416 5-3. Using the audio system (Entune Audio) Selecting a play mode Select “Browse” on the screen. Select the desired play mode by selecting the “Playlists”, “Artists”, “Albums”, “Songs”, “Podcasts”, “Audio books”, “Genres”, “Compos- ers” or “Videos” tab. Then select a song to begin using the selected play mode. Shuffle play Select Repeat play Select to change on/off. to change on/off. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 417 ■About iPod ●“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance stan- dards. ●Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this acces- sory with iPod or iPhone may affect wireless performance. ●iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trade- mark of Apple Inc. ■iPod cover art ●Depending on the iPod and songs in the iPod, iPod cover art may be dis- played. ●This function can be changed to on/off. (P. 399) ●It may take time to display iPod cover art, and the iPod may not be operated while the cover art display is in process. ●Only iPod cover art that is saved in JPEG format can be displayed. ■iPod functions ●When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. ●Depending on the iPod that is connected to the system, certain functions may not be available. If a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and recon- necting it may resolve the problem. ●While connected to the system, the iPod cannot be operated with its own controls. It is necessary to use the controls of the vehicle’s audio system instead. ●When the battery level of an iPod is very low, the iPod may not operate. If so, charge the iPod before use. ●Compatible models (P. 419) RAV4_OM_OM42A17U_(U) 418 5-3. Using the audio system (Entune Audio) ■iPod problems To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner’s Manual. ■Error messages If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures “Connection error. Please consult your Owner’s Man- ual for instructions on how to connect the iPod.” “No music files found.” “No videos found.” “Please check firmware version.” the iPod “iPod authorization unsuc- cessful.” This indicates a problem in the iPod or its con- nection. This indicates that there is no music data in the iPod. This indicates that no video files are included in the iPod. This indicates that the software version is not compatible. Please check the compatible models. (P. 419) This indicates that the audio system failed to authorize the iPod. Please check your iPod. RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 419 ■Compatible models The following iPod®, iPod nano®, iPod classic®, iPod touch® and iPhone® devices can be used with this system. ●Made for • iPod touch (5th generation) • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (7th generation) • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 5 • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Depending on differences between models or software versions etc., some models might be incompatible with this system. CAUTION ■While driving Do not connect an iPod or operate the controls. NOTICE ■To prevent damage to the iPod or its terminals ●Do not leave the iPod in the vehicle. The temperature inside the vehicle may become high. ●Do not push down on or apply unnecessary pressure to the iPod while it is connected. ●Do not insert foreign objects into the port. RAV4_OM_OM42A17U_(U) 420 5-3. Using the audio system (Entune Audio) Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Touch “USB” on the audio source selection screen. Connecting a USB memory device P. 391 Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Displaying the folder list Random playback (P. 393) Repeat play (P. 393) Pause Select Setting the sound (P. 406) to resume playback RAV4_OM_OM42A17U_(U) 5-3. Using the audio system (Entune Audio) 421 ■USB memory functions ●Depending on the USB memory device that is connected to the system, the device itself may not be operable and certain functions may not be avail- able. If the device is inoperable or a function is unavailable due to a mal- function (as opposed to a system specification), disconnecting the device and reconnecting it may resolve the problem. ●If the USB memory device still does not begin operation after being discon- nected and reconnected, format the memory. ■Error messages for USB memory If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures “Connection error. Please consult your Owner’s Man- ual for instructions on how to connect the USB device.” “No music files found.” This indicates a problem with the USB mem- ory device or its connection. This indicates that no MP3/WMA/AAC files are included on the USB memory device.

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2015 Toyota RAV4 Owners Manual