2008 Toyota Hilux Owners Manual

the tracks on the disc have been scanned in one pass, normal play resumes. MP3 Player There are two scan features—You can ei- ther scan the files in a folder or scan the first Scanning the files in a folder: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the files in the folder you are listening to. To select a file, push “SCAN” again. After all the files in the folder have been scanned in one pass, normal play resumes. Scanning the first the folders: Push “SCAN” until you hear a beep. “ ” will appear on the display and the player will scan the first the folder. To select a folder, push the next “SCAN” again. After all the folders have been scanned in one pass, normal play resumes.

file of all

file of

SEEK (Seeking) Radio In the seek mode, the radio finds and plays the next station up or down the station band. To seek a station, quickly push and re- lease the “” or “” under the “SEEK”. Do this again to find another station. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion.

the weak signal

TEXT Compact Disc Player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” while the compact disc is playing. The display changes in the order from the elapsed time to disc title to track title, then back to the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold it until you hear a beep. The rest of the title (up to 24 letters) will appear.

119

HILUX (Q) OM71122E

07/12/21

TUNE·FILE (Tuning and File up/down) Radio Turn the knob clockwise to step up the frequency. Turn the knob counterclockwise to step down the frequency. MP3 Player Turn the knob clockwise to file up. Turn the knob counterclockwise to file down.

MP3 Player This button is used to change the display for the MP3 file that contains text data. To change the display, quickly push and release the “TEXT” while the MP3 file is playing. The display changes in the order from the elapsed time to folder name to file name to album title to track title to artist name, then back to the elapsed time. If this button is pushed while a MP3 file that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire text data is not displayed, push and hold it until you hear a beep. The rest of

the text data will appear.

120

the number of

forward or reverse the disc:

track: the “TRACK” several the track you to listen to appears on the display. to return to the beginning of track, push the “” of the

TRACK (Track up/down) Compact Disc Player To skip up or down to a different Push either side of times until want If you want the current button once, quickly. To fast If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing. MP3 Player To file up or down to a different Push either side of the “TRACK” several times until to listen to appears on the display. to return to the beginning of the current file, push the “” side of the button once, quickly. To fast If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing.

forward or reverse the disc:

the file you want

If you want

file:

HILUX (Q) OM71122E

07/12/21

"Type 2

18I017

Details of specific buttons, controls, and features are described in the alphabetical list

follows.

that

121

HILUX (Q) OM71122E

07/12/21

1 2 3 4 5 6 (Preset buttons) These buttons are used to preset and tune in radio stations. To preset a station to a button: Tune in the desired station. (See “TUNE” knob or “SEEK” button.) Push and hold down the button until you hear a beep—this will set the station to the button. The button num- ber will appear on the display. To tune in to a preset station: Push the button for the station you want. The but- ton number and station frequency will ap- pear on the display. These systems can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM” or “FM”.)

(Eject button)

Cassette tape Push the cassette tape eject button to eject a cassette tape.

122

Compact disc To eject one compact disc only: Push and release the compact disc eject button. If you hold the button too long (if the audio system is on at this time, you hear a the mechanism will change to the beep), mode for ejecting all the discs loaded in the changer. You can also eject any spe- cific one of the discs loaded in the chang- er as follows:

1. Push “DISC ” or “DISC ” button until the number of the disc you want to eject is displayed.

2. Push and release the compact disc

eject button.

To eject all the discs loaded in the chang- er: Push and hold the compact disc eject button (until you hear a beep when the audio system is on). The last compact disc played before pushing the button will be ejected first. If a disc is left in the slot for a long time, the function to eject all the discs will be automatically cancelled. After you turn the ignition to “LOCK”, you will be able to eject one compact disc only or all the discs loaded in the chang- er, but you will not be able to reinsert it or them.

(Program)

” to select the other side of a Push “ cassette tape. The display indicates which ” indicates side is currently selected (“ top side, “ Auto−reverse feature: After the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the forwarding. cassette was playing or fast

” indicates bottom side).

forward button to fast

(Reverse/Fast forward buttons) Push the fast for- ward a cassette tape. “FF” will appear on the display. Push the reverse button to rewind a tape. “REW” will appear on the display. forward- To stop the tape while it forward button or ing, push the fast “TAPE”; is re- winding, push the reverse button or “TAPE”. If a tape side rewinds completely, the cas- sette player will stop and then play that same side. forwards com- pletely, the cassette player will play the other side of the tape, using the auto−re- verse feature.

to stop the tape while it

If a tape fast

is fast

HILUX (Q) OM71122E

07/12/21

AM Push “AM” to turn on the radio and select the AM band. “AM” will appear on the display. If the audio system is off, you can turn on the radio by pushing “AM”. Also, push “AM” to switch from cassette or compact disc operation to radio operation. AUDIO CONTROL Manual tone adjustment function— This knob is used to adjust manually. push For “AUDIO CONTROL” repeatedly until “BAS” appears on the display. Then turn the knob to suit your preference. The display will show the range from “BAS −5” to “BAS 5”. For high−pitch tone adjustment, push “AUDIO CONTROL” repeatedly until “TRE” appears on the display. Then turn the knob to suit your preference. The display will show the range from “TRE −5” to “TRE 5”.

adjustment,

low−pitch

the tone

tone

the left/right balance.

the front/rear balance.

Sound balance adjustment function— This knob is also used to adjust the sound balance between the front and rear, and the right and left speakers. For front/rear adjustment, push “AUDIO CONTROL” repeatedly until “FAD” appears on the display. Then turn the knob to adjust The display will show the range from “FAD−F7” to “FAD−R7”. For left/right adjustment, push “AUDIO CONTROL” repeatedly until “BAL” appears on the display. Then turn the knob to adjust The display will show the range from “BAL−L7” to “BAL−R7”. Sound field adjustment— To adjust the sound field, push “AUDIO CONTROL” until “EQ” appears on the dis- play. Then turn the knob to select “COM- PACT”, “SEDAN” or “MINIVAN”. DISC Push “DISC” to switch from radio or cas- sette operation to compact disc operation. If the audio system is off, you can turn on the compact disc player by pushing “DISC”. In both cases, a disc must alrea- dy be loaded in the player.

the inside of

When the audio system is set into com- pact disc operation, the display shows the track or, track and disc number currently being played. If the player malfunctions, your audio sys- tem will display the following error mes- sages. If “WAIT” appears on the display, it indi- cates that the player unit may be too hot due to the very high ambi- temperature. Remove the disc from ent the player and allow the player to cool down. it If “Err 1” appears on the display, indicates the disc is dirty, damaged, or it was inserted up−side down. Clean the disc or insert If “Err 3” or “Err 4” appears on the display, it indicates there is a trouble in- side the system. Eject the disc or maga- zine. Set If “NO DATA DISC” appears on the dis- play, it indicates that a disc with no mp3
data has been inserted. Remove the disc from the player and insert a mp3 data disc.

the disc or magazine again.

it correctly.

123

HILUX (Q) OM71122E

07/12/21

the number of

If the audio system is off, you can turn on the radio by pushing “FM”. Also, push “FM” to switch from cassette or compact disc operation to radio operation. FOLDER (Folder up/down) To skip up or down to a different folder: Push either side of the “FOLDER” several times until the folder you to listen to appears on the display. want To jump to the first file in the current folder: Push and hold “” side of the button until you hear a beep. To switch between audio data (CD−DA) and MP3 files: Push and hold “” side of the button when playing a disc with audio data (CD−DA) and MP3 files such as CD− EXTRA and MIXED−MODE CD, both types can be played only by switching between MP3 files and audio data (CD−DA). When playing a disc featuring both audio data (CD−DA) and MP3 files, audio data (CD−DA) is played first.

B NR*

” button. The “

the button until

the disc you want

the to listen to

DISC  By using this button, you can select a disc you wish to listen to. Push either side of number of appears on the display. Dolbyr If you are listening to a tape that was recorded with Dolbyr B Noise Reduction, push the “ ” will ap- pear on the display. Push the button again to turn off Dolbyr B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used for recording the tape. *: Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. FM Push “FM” to turn on the radio and select the FM band. “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM stations, two for each but- ton.

124

“ON”

LOAD This button is used to load the compact discs in the compact disc changer which is integrated with the radio and cassette player. This compact disc changer can store up to 6 discs. The key must be in the “ACC” or position. Loading one compact disc only— To load one compact disc only, quickly If you hold push and release the button. the button too long (if the audio system is on at this time, you hear a beep), the mechanism will change to the mode for loading multiple compact discs. After pushing the button, insert a compact disc. At this time, the indicators on both sides the slot are flashing. After the disc is of loaded, the slot will close and the indicators will stop flashing. If no compact disc is inserted, the shutter will close after 15 seconds.

the shutter of

HILUX (Q) OM71122E

07/12/21

the first compact disc. At insert the indicators on both sides of

Loading multiple compact discs— To load multiple compact discs, push and hold (until you hear a beep when the au- dio system is on). After pushing the but- ton, this time, the slot are flashing. After the disc is loaded, the shutter of the slot will close and the indicators will stop flashing. After a few seconds, the shutter will automatically open again so the next disc can be in- serted. The same process can be applied for loading the rest of If no compact disc is inserted, the shutter will close after 15 seconds. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume.

the discs.

RAND (Random) Compact Disc Player There are two random features—You can either listen to the tracks on all the com- pact discs in the magazine in random or- der, or only listen to the tracks on a specific compact disc in random order. Random playing for the tracks on a disc: Quickly push and release “RAND”. “RAND” will appear on the display. The disc you are listening to will play in random order. If you hear a beep, you held the button too long, and the player will play all the tracks in the magazine in random order. To turn off the random feature, push this button again. Random playing for all magazine: Push and hold “RAND” until you hear a beep. “ ” will appear on the dis- play and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the random fea- ture, push this button again.

the tracks in the

and

push

” will appear on the display.

MP3 Player There are two random features—You can either listen to all the files on the compact disc in random order, or only listen to the files in a folder in random order. To randomly play the files in a folder: Quickly “RAND”. “ To randomly play all the files on the com- pact disc: Push and hold “RAND” until you hear a beep. “ ” will appear on the dis- play and the player will play all the files on the disc in random order. To turn off the random feature, push this button again.

release

125

HILUX (Q) OM71122E

07/12/21

RPT (Repeat) Cassette Player Push “RPT” while the track is playing. “ ” will appear on the display. When the track ends, it will automatically be rewound and replayed. This process will be continued until you push the button again to turn off There must be at least 3 seconds of blank space between tracks in order for the re- peat Compact Disc Player features—You can There are two repeat either replay a disc track or a whole com- pact disc.

feature to work correctly.

the repeat

feature.

Repeating a track: Quickly push and release “RPT” while the track is playing. “RPT” will appear on the display. If you hear a beep, you held the button too long, and the player will repeat the whole disc. When the track ends, it will automatically be replayed. This pro- cess will be continued until you push the button again to turn off the repeat feature. Repeating a disc: Push and hold “RPT” until you hear a beep. “ ” will appear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back track on the disc and replay. to the first To turn off the repeat feature, push this button again.

126

features—You can

MP3 Player There are two repeat either replay a file or a whole folder. Repeating a file: Quickly push and release “RPT” while the file is playing. “ ” will appear on the display. When the file ends, it will auto- matically be replayed. This process will be continued until you push the button again to turn off Repeating a folder: Push and hold “RPT” until you hear a beep. ” will appear on the dis- play. The player will repeat all the files in the folder you are listening to. When the final file in the folder ends, the player will file in automatically go back to the first the folder and replay. To turn off the re- peat

feature, push this button again.

the repeat

feature.

“

HILUX (Q) OM71122E

07/12/21

SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold “SCAN” until you hear a beep. The radio will tune in the next pres- et station up the band, stay there for 5
seconds, and then move to the next pre- set station. To select a station, push “SCAN” again. In FM1 (FM2) mode, when the preset scan reaches CH6 of FM1 (FM2), it switches to CH1 of FM2 (FM1) and con- tinues the preset scan. To scan all Quickly push and release “SCAN”. If you hear a beep, you held the button too long, and the radio will scan the preset sta- tions. The radio will find the next station up the station band, stay there for 5 se- conds, and then scan again. To select a station, push “SCAN” again. When the end of it will automatically scan from the lower end of

the band is reached,

the frequencies:

the band.

Compact Disc Player There are two scan features—You can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning for the tracks on a disc: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are listening to. If you hear a beep, you held the button too long, and the player will scan the first track of all the discs in the magazine. To select a track, push “SCAN” again. After all the tracks on the disc have been scanned in one pass, nor- mal play resumes. Scanning for the first discs in the magazine: Push “SCAN” until you hear a beep. “ ·SCAN” will appear on the display and the player will perform the first track of the next disc. To select a disc, push the “SCAN” again. After all the discs have been scanned in one pass, normal play resumes.

tracks of all

the

file of all

MP3 Player There are two scan features—You can ei- ther scan the files in a folder on a specif- ic disc or scan the first the folders. Scanning the files in a folder: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the files in the folder you are listening to. To select a file, push “SCAN” again. After all the files in the folder have been scanned in one pass, normal play resumes. the folders: Scanning the first Push “SCAN” until you hear a beep. “ ” will appear on the display and the player will scan the first the next folder. To select a folder, push the “SCAN” again. After all the folders have been scanned in one pass, normal play resumes.

file of all

file of

127

HILUX (Q) OM71122E

07/12/21

SEEK (Seeking) Radio In the seek mode, the radio finds and plays the next station up or down the station band. To seek a station, quickly push and re- lease the “” or “” under the “SEEK”. Do this again to find another station. Cassette Player By using this button, you can skip up or down to a different You can skip up to nine tracks at a time. Push the up or down side of the button. “FF 1” or “REW 1” will appear on the display. Next, push either side of the track button until the number on the display reaches the number of tracks you want to skip. If you push the button ten times, the skip feature will be turned off.

track.

128

to count

remember

to rewind,

tracks you When counting the number of want the current track as well. For example, if you want to rewind to a song that is two be- fore the song you are listening to, push on the down side of the button until “REW 3” appears on the display. If you have pushed the track button more than you wanted to, push the other side of the button. The track number will be reduced. is not valid The track number you select if tracks remaining on the current cassette side. the tape is D After the player will automatically

is higher than the number of

the beginning of

reached, start playing the same side.

it

D After the end of

the tape is reached, the player will automatically reverse sides and start playing the other side. There must be at least 3 seconds of blank space between tracks for the track button to work correctly. the feature may not work well with some spoken word,

live, or classical recordings.

In addition,

the weak signal

ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push “TAPE” to switch from radio or com- pact disc operation to cassette operation. If the audio system is off, you can turn on the cassette player by pushing “TAPE”. In both cases, a cassette must already be loaded in the player. TEXT Compact Disc Player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” while the compact disc is playing. The display changes in the order from the elapsed time to disc title to track title, then back to the elapsed time.

HILUX (Q) OM71122E

07/12/21

If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. the entire disc or track title does not If appear on the display, push and hold it until you hear a beep. The rest of the title (up to 24 letters) will appear. MP3 Player This button is used to change the display for the MP3 file that contains text data. To change the display, quickly push and release the “TEXT” while the MP3 file is playing. The display changes in the order from the elapsed time to folder name to file name to album title to track title to artist name, then back to the elapsed time. If this button is pushed while a MP3 file that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire text data is not displayed, push and hold it until you hear a beep. The rest of

the text data will appear.

the number of

forward or reverse the disc:

track: the “TRACK” several the track you to listen to appears on the display. to return to the beginning of track, push the “” of the

TRACK (Track up/down) Compact Disc Player To skip up or down to a different Push either side of times until want If you want the current button once, quickly. To fast If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing. MP3 Player To file up or down to a different Push either side of the “TRACK” several times until to listen to appears on the display. to return to the beginning of the current file, push the “” side of the button once, quickly. To fast If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing.

forward or reverse the disc:

the file you want

If you want

file:

TUNE·FILE (Tuning and File up/down) Radio Turn the knob clockwise to step up the frequency. Turn the knob counterclockwise to step down the frequency. MP3 Player Turn the knob clockwise to file up. Turn the knob counterclockwise to file down.

129

HILUX (Q) OM71122E

07/12/21

the best performance for your cas-

CARING FOR YOUR CASSETTE PLAYER AND TAPES For sette player and tapes: Clean the tape head and other parts regu- larly. D A dirty tape head or

tape path can decrease sound quality and tangle your cassette tapes. The easiest way to clean them is by using a cleaning tape. (A wet

type is recommended.)

Audio system operating hints

NOTICE

To ensure correct audio system op- erations: z Be careful not

to spill beverages

over the audio system.

z Do not put anything other than a cassette tape or compact disc into the slot.

z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the au- dio system which you are listening to. However, this does not indicate a malfunction.

RADIO RECEPTION FM broadcasts have a range of about 40
km or 25 miles. When driving away from a station you may have to fine−tune your radio and turn up the volume as the sta- tion gets weaker. Because FM uses a line−of−sight signal, tall buildings or hills may sometimes block reception. These are all normal characteristics of FM recep- tion and do not indicate any problem with the radio itself.

130

Use high−quality cassettes. D Low−quality cassette tapes can cause including poor sound, many problems, inconsistent and constant auto−reversing. They can also get stuck or tangled in the cassette player.

playing

speed,

D Do not use a cassette if if

tangled or

damaged or peeling off.

it has been its label is

D Do not

leave a cassette in the player if you are not listening to it, especially if

is hot outside.

it

D Store cassettes in their cases and out

of direct sunlight.

D Avoid using cassettes with a total play- ing time longer than 100 minutes (50
minutes per side). The tape used in these cassettes is thin and could get stuck or tangled in the cassette player.

HILUX (Q) OM71122E

07/12/21

CARING FOR YOUR COMPACT DISC PLAYER AND DISCS D Your compact disc player

is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.

D Bumpy roads or other vibrations may make your compact disc player skip. D If moisture gets into your compact disc player, you may not hear any sound even though your compact disc player appears to be working. Remove the disc from the player and wait until it dries.

CAUTION

Compact disc players use an invisible laser beam which could cause hazard- ous radiation exposure if directed outside the unit. Be sure to operate the player correctly.

D Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−Writable) CD−ROM

Special shaped discs

z17058

Transparent/translucent discs

131

HILUX (Q) OM71122E

07/12/21

NOTICE

z Do not use special shaped, trans- parent/translucent, low quality or la- beled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc.

z This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to the player or changer.

Correct

Wrong

D Handle compact discs carefully, espe- cially when you are inserting them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.)

D Remove discs from the compact disc player when you are not listening to them. Store them in their plastic cases away from moisture, heat, and direct sunlight.

z17039

Low quality discs

Labeled discs

132

HILUX (Q) OM71122E

07/12/21

To clean a compact disc: Wipe it with a lint−free cloth that has been damp- soft, line ened with water. Wipe in a straight from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti−static device.

MP3 FILES D MP3 is short for MPEG Audio Layer 3
and refers to an audio compression technology standard.

D The MP3 player allows playback of MP3 files on CD−ROM, CD−R and CD− RW discs. Disc recordings compatible with level 1
and level 2 of ISO 9660 and with the Romeo and Joliet file system can be played back.

D When naming a MP3 file, add the cor- responding filename extension (.mp3). D The MP3 player plays back files with the file name extension (.mp3) as an MP3 file. To prevent noise and mal- functions, do not use this extension for files other than MP3 files.

D It

is possible to play back multi−ses-

sion compatible recorded discs.

D When playing discs with MP3 files and audio data (CD−DA) such as CD−EX- TRA and MIXED−MODE CD, both types can be played only by switching be- tween MP3 and CD−DA. When playing a disc featuring both CD−DA and MP3 tracks, CD−DA tracks are played first.

D Files are compatible with the ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 and Ver. 2.3
formats for display of album (disc title), track (track title) and artist (track art- ist).

D Only when MP3 files of 32, 44.1 and 48 kHz frequencies are played back, the emphasis function is valid. (16, 22.05, 24 kHz sampling frequencies can be played back.)

D The sound quality of MP3 files general- ly becomes better with higher bit rates. This product can play recordings with bit rates from 8 kbps to 320 kbps, but in order to be able to enjoy a certain sound quality, is recommended to use only discs recorded with a bit rate of at

least 128 kbps.

it

133

HILUX (Q) OM71122E

07/12/21

D The MP3 player does not play back MP3 files from discs recorder using packet write data transfer (UDF for- mat). Discs should be recorded using “pre−mastering” software rather than packet−write software.

D There is no m3u playlist compatibility. D There is no compatibility with the MP3i (MP3 interactive) or mp3PRO format. is compatible with

D The MP3 player

VBR (Variable Bit Rate).

D When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if fast−forward or reverse operations are used.

D It is not possible to check folders that

do not

include MP3 files.

D MP3 files in up to 8 tiers of

folders can be played back. However, there is a delay in the start of playback on discs with numerous tiers. For this rea- son we recommend creating discs with no more than 2 tiers.

D It

is possible to play back up to 253

folders on one disc.

134

D The turn of play of

the compact disc having the structure shown on the left is as follows:

001.mp3

002.mp3 . . .

011.mp3

D The order changes depending on the PC and MP3 encoding software you use.

Folder 1
001.mp3
Folder 2
002.mp3
003.mp3
004.mp3
005.mp3

Folder 3
006.mp3

18i023

Folder

Folder 4
007.mp3

Folder 5
008.mp3

Folder 6
009.mp3

Folder 7
010.mp3

Folder 8
011.mp3

HILUX (Q) OM71122E

07/12/21

text

D Titles and other

information re- corded on a CD−R/CD−RW disc may not be displayed by the MP3 player (in the case of audio data (CD−DA)).

D The MP3 player conforms to the track skip function of the CD−R/CD−RW disc. D If you insert a CD−RW disc into the MP3 player, load time to playback will be longer than for a conventional CD or CD−R disc.

D Read the precautions accompanying

the CD−R/CD−RW discs before use.

D Recordings on CD−R/CD−RW cannot the DDCD

be (Double Density CD) system.

played

using

back

CD−R and CD−RW discs D CD−R/CD−RW discs that have not been subject (a process that allows them to be played back on a conventional CD player) cannot be played back.

to the “finalizing process”

D It may not be possible to play back CD−R/CD−RW discs recorded on a mu- sic CD recorder or a personal comput- er because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of this unit.

D Playback of discs recorded on a per- sonal computer may not be possible depending on the application settings and the environment. Record with the correct format. (For details, contact the manufacturer of

the applications.)

D Playback of CD−R/CD−RW discs may become impossible in case of direct exposure to sunlight, high tempera- tures, or the storage conditions in the vehicle.

TERMS Packet write— This is a general term for a method of writing on CD−R, etc. at the time required for a file, just as is done with files on floppy or hard discs. Bit rate— This expresses data volume per second, or bps units (bits per second). The higher the rate, the more information is available to reproduce the sound. Using the same encoding methods (such as MP3), the higher the rate, Multi−session— Multi−session is a recording method that allows additional data to be recorded later. When recording data on a CD−ROM, CD−R or CD−RW, etc., all data from be- ginning to end is treated as a single unit or session. Multi−session is a method of recording more than 2 sessions in one disc.

the better the sound.

135

HILUX (Q) OM71122E

07/12/21

m3u— Playlists created using the “WINAMP” soft- ware have a playlist file extension (.m3u). MP3— MP3 is short for MPEG 1 & 2 Audio Layer 3. It is an audio compression standard set by a working group (MPEG) of the ISO (International Standards Organization). MP3 is able to compress audio data to about 1/10 the level of a conventional disc.

CD−DA— CD−DA is an abbreviation of Compact Disc Digital Audio. It refers to the uncom- pressed format of regular CDs. ID3 Tag— This is a method of embedding track−re- lated information in a MP3 file. This em- bedded information can include the track title, the artist’s name, the album title, the music genre, the year of production, com- ments and other data. The contents can be freely edited using software with ID3
Tag editing functions. Although the tags are restricted to the number of characters, the information can be viewed when the track is played back.

three characters).

ISO 9660 format— This is the international standard for the format logic of CD−ROM folders and files. For the ISO 9660 format, there are regula- tions for the following two levels. Level 1: The file name is in 8.3 format (the name consists of up to 8 characters, half−byte English capital letters and half−byte nu- merals and the “_” sign, with a file exten- sion of Level 2: The file name can have up to 31 charac- ters (including the separation mark “.” and a file extension). Each folder contains less than 8 hierarchies. Extended formats Joliet: File name can have up to 64 characters. Romeo: File names can have up to 128 charac- ters.

136

HILUX (Q) OM71122E

07/12/21

SECTION 1− 9

OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Controls Air flow selector settings Operating tips Instrument panel vents Power heater switch Air conditioning filter

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

138
141
141
144
144
144

137

07/12/21

1. “A/C” button (on some models) 2. Air intake selector 3. Temperature selector 4. Fan speed selector 5. Air flow selector

HILUX (Q) OM71122E

Controls

138

19h014b

HILUX (Q) OM71122E

07/12/21

to the left

to increase,

Fan speed selector Turn the knob to adjust the fan speed—to the right to de- crease. Temperature selector Turn the knob to adjust ture—to the right to warm, cool.

the tempera- to the left to

i17024

Air flow selector Turn the knob to select the vents used for air flow. 1. Panel—Air

flows mainly

from the

instrument panel vents.

2. Bi−level—Air flows from both the floor vents and the instrument panel vents.

3. Floor—Air flows mainly from the floor

vents. Use with the air intake selector posi- tioned in Fresh.

4. Floor/Windshield—Air

flows mainly from the floor vents and windshield vents. Use with the air intake selector posi- tioned in Fresh.

5. Windshield—Air flows mainly from the

windshield vents. Use with the air intake selector posi- tioned in Fresh.

For details about air flow selector settings, see “Air flow selector settings” on page 141.

139

HILUX (Q) OM71122E

07/12/21

“A/C” button (on some models) To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again.

h17032

Air intake selector Move the selector lever to select source. 1. Recirculate—Recirculates the air inside

the air

the vehicle.

2. Fresh—Draws outside air into the sys-

tem.

140

HILUX (Q) OM71122E

07/12/21

Air flow selector settings

Operating tips D To cool off your Toyota after

it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.

D Make sure the air intake grilles in front the windshield are not blocked (by

of leaves or snow,

for example).

19h017a

D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of

the windshield.

D Keep the area under

the front seats clear to allow air to circulate through- out

the vehicle.

D On cold days, set

the fan speed to high for a minute to help clear the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.

D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that to FRESH and the fan speed to any setting ex- cept “OFF”.

intake be set

the air

141

HILUX (Q) OM71122E

07/12/21

Heating For best results, set controls to:

Air conditioning For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards WARM

Fan speed—Any setting except “OFF” Temperature—Towards COLD

(red zone)

Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF

(blue zone)

Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON

D For quick cooling, move the air intake to recirculate for a few min-

selector utes.

D For quick heating, select

recirculated air for a few minutes. To keep the windows from fogging, select fresh af- ter the been warmed.

vehicle

interior

has

D Press the “A/C” button on for dehumidi-

fied heating.

D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield.

D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake be temporarily set to RECIR- CULATE, which will close off the out- side passage and prevent outside air and dust from entering the vehicle inte- rior.

142

HILUX (Q) OM71122E

07/12/21

Ventilation For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards COLD

(blue zone)

Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF

Defogging The inside of For best results, set controls to:

the windshield

Defrosting The outside of For best results, set controls to:

the windshield

Fan speed—Any setting except “OFF” Temperature—Towards WARM

Fan speed—Any setting except “OFF” Temperature—Towards WARM

(red zone)

Air intake—FRESH (outside air) Air flow—WINDSHIELD Air conditioning—OFF

D To heat

the vehicle interior while de- frosting the windshield, choose floor/ windshield air flow.

(red zone) to heat; COLD (blue zone) to cool

Air intake—FRESH (outside air) Air flow—WINDSHIELD Air conditioning—ON

The outside of For best results, set controls to:

the windshield

Fan speed—Any setting except “OFF” Temperature—Towards WARM

(red zone)

Air intake—FRESH (outside air) Air flow—WINDSHIELD Air conditioning—OFF

D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of

the windshield.

143

HILUX (Q) OM71122E

07/12/21

Instrument panel vents

Power heater switch (on some models)

Air conditioning filter—

Open/ adjust

Close

Center vents

Open/ adjust

Side vents

144

Close

19h016

To turn on the power heater, push the switch. To turn off the power heater, push the switch once again. Use the power heater switch to adjust the heating effect in extremely cold conditions. If you do not turn the power heater switch to off, the engine speed is increased whenever the engine is started.

The air conditioning filter information label is placed in the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent.

HILUX (Q) OM71122E

19H027

—Checking and replacing the air conditioning filter The air conditioning filter may clog af- ter long use. The filter may need to be replaced if the air flow of the air condi- tioning and heater experiences extreme reductions in operating efficiency, or if the windows begin to fog up easily in FRESH mode. To maintain the air conditioning efficiency, inspect and replace the air conditioning filter according to the maintenance sched- ule. (For scheduled maintenance informa- tion, please refer to the “Warranty and Service Booklet”.)

07/12/21

19H028

The air conditioning filter is behind the glove box.

1. Open the glove box and push in each side of the glove box to release the stoppers.

145

HILUX (Q) OM71122E

07/12/21

19H029

19H030

19H031

3. Pull the filter out of the filter outlet.

Inspect the filter on the surface. it

it should be replaced.

is dirty,

If

When inserting the filter in the filter outlet, keep the arrow pointing up.

INFORMATION

filter should be installed The air properly in position. The use of air conditioning with the air filter removed cause deteriorated dustproof may performance then air conditioning performance.

affect

and

2. Remove the filter cover as shown in

the illustration.

146

HILUX (Q) OM71122E

07/12/21

SECTION 1− 10

OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Multi−information display Clock Cigarette lighter and ashtrays Power outlet Rear console box Glove box Auxiliary box Cup holders Bottle holders Floor mat

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

148
154
155
156
157
157
158
158
160
160

147

HILUX (Q) OM71122E

07/12/21

Multi−information display (on some models)

The following information is displayed on the multi−information display when you push the “INFO.” button (on the multi−information display) with the en- gine switch turned on. Each time you push the “INFO.” button, the display changes to the next display setting. 1. Outside temperature 2. Average fuel consumption 3. Instantaneous fuel consumption 4. Average vehicle speed 5. Driving time 6. Driving range 7. Compass 8. Off

10i016

148

HILUX (Q) OM71122E

07/12/21

The displayed values in the multi−informa- tion display indicate general driving condi- tions. Accuracy varies with driving habits and road conditions. the last When the engine switch is on, previously used mode displayed just be- fore the engine switch is off will appear. If the electrical power source has been disconnected from the multi−information display, the display will automatically be set When the instrument panel turned on, the brightness of will be reduced.

lights are the display

to the initial mode.

CAUTION

Operate the switches with due care while you are driving to avoid acci- dents.

the outside air

OUTSIDE TEMPERATURE DISPLAY The display indicates between the range of –40_C (–40_F) and 50_C (122_F). If an abnormality exists in the connection of temperature sensor, “––_C” will appear on the display. If “––_C” appears, contact your Toyota deal- er. AVERAGE FUEL CONSUMPTION (“AVG. L/100 km” or “AVG. km/l”) Average fuel consumption is calculated and displayed based on total driving distance and total fuel consumption with the engine running. To reset the calculations, push and hold the “RESET” button (on the multi−informa- tion display) for more than 1 second.

INSTANTANEOUS FUEL CONSUMPTION (“L/100 km” or “km/l”) The instantaneous fuel consumption is calculated and displayed based on dis- tance and fuel consumption with the engine running. Note that an accurate figure may not be shown in the following cases. D The vehicle is stopped with the engine indicate the

running. (The display will extremely high fuel consumption.)

D The vehicle is driving down a long slope, applying the engine brake. (The display will indicate the extremely low fuel consumption.)

The calculation is reset when the engine switch is turned off.

149

HILUX (Q) OM71122E

07/12/21

AVERAGE VEHICLE SPEED (“AVG. km/h”) Average vehicle speed is calculated and displayed based on total driving dis- tance and total driving time with the engine running. To reset the calculations, push and hold the “RESET” button for more than 1 sec- ond. DRIVING TIME (“E/T”) The elapsed time after the ignition is turned on is displayed. When the ignition is turned on, driving time is counted from 0:00. Up to 19:59
(19 hours, 59 minutes) can be displayed. When the driving time exceeds 19:59, the counter returns to 0:00. the display, push and hold the To reset “RESET” button for more than 1 second.

10i002

MILEAGE/FUEL CONSUMPTION DISPLAY Only the display for fuel consumption rate (L/100 km) and mileage (km/l) may be interchanged using the following procedure: 1. Get access to the average fuel con- instantaneous fuel con-

sumption or sumption display.

2. Hold down the “INFO.” button until the

unit

flashes.

3. Push the “RESET” button to change

the unit.

4. Push the “INFO.” button.

150

It

the fuel gauge reaches “E”.

DRIVING RANGE (“RANGE km”) The distance the vehicle can travel with the remaining fuel is calculated and displayed based on the quantity of re- maining fuel and past fuel consumption. The driving range display indicates the approximate distance that you can drive until is different from the actual distance traveled. Every time you refuel the vehicle, the cal- culation is reset. The actual driving range varies with driv- ing habits and road conditions. If fuel con- sumption is good, the driving range will be longer than indicated. If fuel consumption is poor, the driving range will be shorter than indicated. If the low fuel on, refuel indicates that further.

level warning light comes the display the vehicle can be driven

the vehicle even if

HILUX (Q) OM71122E

07/12/21

COMPASS The compass indicates the direction in which the vehicle is heading.

Displays Displays

NE SE SW NW

Directions Directions

North

Northeast

East

Southeast

South

Southwest

West

Northwest

The compass may not show the correct direction in the following conditions: D The vehicle is stopped immediately af- ter turning. The compass does not ad- just while the vehicle is stopped.

D The engine switch is turned off immedi-

ately after turning.

D The vehicle is on an inclined surface. D The vehicle is in a place where the earth’s magnetic field is subject to in- terference by artificial magnetic fields (underground parking, under a steel tower, between buildings, roof parking, near a crossing, near a large vehicle, etc.).

D The vehicle is magnetized. (There is a magnet or a metal object on or near the multi−information display.)

the deviation is small,

D The battery has been disconnected. If the compass works to calibrate the direction automati- cally while the vehicle is in motion. For obtaining additional precision or for complete calibrating, see “Calibrating the compass” below.

NOTICE

Do not put magnets or a metal object near the multi−information display. Doing so may cause malfunction of the compass sensor.

Calibrating the compass (deviation calibration) The direction display on the compass deviates from the true direction deter- mined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of To adjust for this deviation, stop the ve- hicle and push the “INFO.” button for a few seconds until the number (1−15) ap- pears on the clock. Then push the “H” or “M” button, referring to the following map to select the zone where the vehicle is.

the number of

the vehicle.

151

HILUX (Q) OM71122E

07/12/21

After calibration, leave the system for 6
seconds or push the “INFO.” button. The calibration is finished.

CAUTION

Operate the switches with due care while you are driving to avoid acci- dents.

10i003a

Zone number

152

HILUX (Q) OM71122E

07/12/21

10i017

10i018

Calibrating the compass (circling calibration) Sometimes the direction display on the compass may flash. In this case, the com- pass needs to be calibrated. To calibrate the compass: 1. Stop the vehicle in a safe place. Push and hold the “INFO.” button for a few seconds.

Number (1−15) appears on the clock. 2. Push the “RESET” button. “−N−” appears on the display.

If no button is pushed for 6 seconds, the display will automatically return to the flashing direction display. In this case, re-