2014 Toyota Highlander Owners Manual

changed to USB memory mode, the USB memory device will start play- ing the first file in the first folder. If the same device is removed and reconnected (and the con- tents have not been changed), the USB mem- ory device will resume play from the same point in which it was last used.

●Extensions

If the file extensions .mp3, .wma and .m4a are used for files other than MP3, WMA and AAC files, they will be skipped (not played).

●Playback

• To play MP3 files with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• There is a wide variety of freeware and other encoding software for MP3, WMA and AAC files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all. • Microsoft, Windows, and Windows Media are the registered trademarks

of Microsoft Corporation in the U.S.A. and other countries.

WARNING

■While driving

Do not connect a USB memory device or operate the device controls.

NOTICE

■To prevent damage to the USB memory device or its terminals

●Do not leave the USB memory device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the USB memory device.

●Do not push down on or apply unnecessary pressure to the USB memory

device while it is connected.

●Do not insert foreign objects into the port.

HIGHLANDER_U (OM48A12U)

370

5-6. Using an external device

Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” or “A/V” to display the audio control screen.

Connecting a portable audio player P. 342

■Operating portable audio players connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio player itself.

■When using a portable audio player connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio player.

WARNING

■While driving

Do not connect a portable audio player or operate the device controls.

HIGHLANDER_U (OM48A12U)

5-7.Connecting Bluetooth®

371

Preparations to use wireless communica- tion The following can be performed using Bluetooth® wireless com- munication: ■ A portable audio player can be operated and listened to via

audio system

■ Hands-free phone calls can be made via a cellular phone In order to use wireless communication, register and connect a Bluetooth® device by performing the following procedures.

■About Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned Bluetooth SIG, Inc. and any use of such marks by is under PIONEER CORPORATION license. Other trade names are those of their respective own- ers.

trademarks and

HIGHLANDER_U (OM48A12U)

372

5-7. Connecting Bluetooth®

■Certifications for the Bluetooth (caution)

FCC ID: AJDK068

CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive expo- sure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). • Co-location: This transmitter must not be co-located or operated in con-

junction with any other antenna or transmitter.

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC: 775E-K068
• This device complies with Industry Canada licence-exempt RSS stan- dard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAUTION: Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure limits set forth for uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles).

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

373

Device registration/connection flow

1. Register the Bluetooth® device to be used with audio sys-

tem (P. 375, 376, 377)

2. Connect the Bluetooth® device to be used

(P. 379)

To be used for audio

To be used for hands-free phone

3. Start Bluetooth® connec-

tion (P. 379)

3. Start Bluetooth® connec-

tion (P. 379)

4. Check connection status

(P. 383)

4. Check connection status

(P. 385)

5. Use Bluetooth® audio

(P. 383)

5. Use Bluetooth® phone

(P. 384)

HIGHLANDER_U (OM48A12U)

374

5-7. Connecting Bluetooth®

Registering and connecting from the “Bluetooth* Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth*” on the “Setup” screen.

Select to connect the device to be used with audio system. (P. 379) Select to register a Bluetooth® device to be used with audio system. (P. 377) Select detailed Bluetooth® system settings. (P. 382) Select to delete registered devices. (P. 378)

set

to

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

375

Registering a Bluetooth® audio player for the first time To use the Bluetooth® Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the Bluetooth® Audio. For details about registering a Bluetooth® device (P. 377)

Turn the Bluetooth® connection setting of your audio player on. Press the “AUDIO” button. Select “ Select “Select Device”. Follow the steps in “How to register a Bluetooth® device” from “STEP 2”. (P. 377)

Audio”.

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

376
Registering a Bluetooth® phone for the first time To use the hands-free system, it is necessary to register a Bluetooth® phone with the system. Once the phone has been registered, it is possible to use the hands-free system. For details about registering a Bluetooth® device (P. 377)

” button.

Turn the Bluetooth® connection setting of your cellular phone on. Press the “ Select “OK” to register a phone. Follow the steps in “How to register a Bluetooth® device” from “STEP 3”. (P. 377)

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

377

Registering a Bluetooth® device Bluetooth® compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5
Bluetooth® devices.

How to register a Bluetooth® device

Display the “Bluetooth* Setup” screen. (P. 374)

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Select “Add”. When this screen is displayed, search for the device name dis- played on this screen on the screen of your Bluetooth® device. For details about operating the Bluetooth® device, see the manual that comes with it. To cancel the registration, select “Cancel”. Register the Bluetooth® device using your Bluetooth® device. A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth® devices. Depending on the type of Bluetooth® device being connected, a message confirming registration may be displayed on the Bluetooth® device’s screen. Respond and operate the Bluetooth® device according to the confirmation message.

HIGHLANDER_U (OM48A12U)

378

5-7. Connecting Bluetooth®

Check that this screen is dis- played when is complete.

registration

Select “OK” when the connection status changes from “Connect- ing...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again.

Registration can be performed “Bluetooth* Setup” screen. ■ When registering from the “Bluetooth* Audio” screen

from screens other

than

the

Display the “Bluetooth* Audio” screen. (P. 350) Select “Select Device”. Follow the steps in “How to register a Bluetooth® device” from “STEP 2”. (P. 377)

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc. Deleting a Bluetooth® device

Display the “Bluetooth* Setup” screen. (P. 374)

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Select “Remove”. Select the desired device. A confirmation message will be displayed, select “Yes” to delete the device. Check that a confirmation screen is displayed when the operation is complete.

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

379

Connecting a Bluetooth® device Up to 5 Bluetooth® devices (Phones [HFP] and audio players [AVP]) can be registered. If more than 1 Bluetooth® device has been registered, select which device to connect to.

Press the “SETUP” button. Select “Bluetooth*”.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Select the device to be con- nected. Supported profile icons will be dis- played.

Phone Audio player

Supported profile icons for cur- rently connected devices will illumi- nate. Dimmed icons can be selected to connect to the function directly.

Auto connection To turn auto connection mode on, set “Bluetooth* Power” to on. (P. 382) When you register a phone, auto connection will be activated. Always set it to this mode and leave the Bluetooth® phone in a place where a connection can be established.

When the audio system is turned to on, the system will search for a nearby cellular phone you have registered. Next, the system automatically connects with the most recent of the phones connected to in the past. Then, the connection result is displayed.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

HIGHLANDER_U (OM48A12U)

380

5-7. Connecting Bluetooth®

Manual connection When auto connection has failed or “Bluetooth* Power” is turned off, you must connect the Bluetooth® device manually. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Follow the steps in “Connecting a Bluetooth® device” from “STEP 1”. (P. 379)

Connecting a Bluetooth® audio player  Registering an additional device

Select “Select Device” on the Bluetooth® audio control screen. For more information: P. 377

 Selecting a registered device

Select “Select Device” on the Bluetooth® audio control screen. For more information: P. 379

■Reconnecting a Bluetooth® phone

If the system cannot connect due to poor signal strength, the system will automatically attempt to reconnect. If the phone is turned off, the system will not attempt to reconnect. In this case, the connection must be made manually, or the phone must be rese- lected.

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

381

Displaying a Bluetooth® device details You can confirm and change the registered device details.

Bluetooth® device registration status

Display the “Bluetooth* Setup” screen. (P. 374)

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Select the device. Select “Device Info”. Following screen is displayed:

Change device Name Change connection method (P. 381) Bluetooth® Address Display your telephone num- ber The number may not be dis- played depending on the model of phone. Compatibility profile of the device Restore default settings

Changing connection method

Select “Connect Audio Player from”. Select “Vehicle” or “Device”. “Vehicle”: Connect the audio system to the portable audio player. “Device”: Connect the portable audio player to the audio system

HIGHLANDER_U (OM48A12U)

5-7. Connecting Bluetooth®

382
Detailed Bluetooth® system settings You can confirm and change the detailed Bluetooth® settings.

How to check and change detailed Bluetooth® settings

Display the “Bluetooth* Setup” screen. (P. 374) Select “System Settings”. The following screen is displayed:

Bluetooth® Power on/off You can change Bluetooth® function on/off Change Bluetooth® Name Change PIN-code (P. 382) Bluetooth® Address Display Phone Status Select to set the phone connec- tion status display on/off. Display Audio Player Status Select to set the connection sta- tus display of the audio player on/off. Compatibility profile of the system Restore default settings

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc. Editing the Bluetooth* PIN You can change the PIN-code that is used to register your Bluetooth® devices in the system.

Select “Bluetooth* PIN”. Input a PIN-code, and select “OK”.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

HIGHLANDER_U (OM48A12U)

5-8.Bluetooth® Audio

383

Listening to Bluetooth® Audio The Bluetooth® audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wire- less communication. When a Bluetooth® device cannot be connected, check the connec- tion status on the “Bluetooth* Audio” screen. If the device is not con- nected, either register or reconnect the device. (P. 379) *: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Status display You can check such indicators as signal strength and battery charge on the screen.

Connection status Battery charge

Indicators

Connection status

Battery charge

Good

Full

Conditions

Not connected

Empty

or

to Play/Pause.

Playing Bluetooth® audio Select For details on “Bluetooth* Audio” screen operation methods, refer to Basic Audio Operations. (P. 343) For details on how to select a track or album, refer to selecting, fast- forwarding and reversing tracks/files/songs. (P. 352) *: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

HIGHLANDER_U (OM48A12U)

5-9.Bluetooth® phone

384
Using a Bluetooth® Phone The hands-free system is a function that allows you to use your cellular phone without touching it. This system supports Bluetooth®. Bluetooth® is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls. Before making a phone call, check the connection status, battery charge, call area and signal strength. (P. 385) If a Bluetooth® device cannot be connected, check the connection status on the phone screen. If the device is not connected, either register or reconnect it. (P. 379)

Phone screen To display the screen shown below, press the ing wheel or the Several functions are available to operate on each screen that is dis- played by selecting the 4 tabs.

switch on the steer-

button.

Device name Bluetooth® connection status

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

385

■ Telephone switch (P. 397) ■ Microphone

The vehicle’s built in micro- phone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. To use the hands-free system, you must your Bluetooth® phone in the sys- tem. (P. 377)

register

Status display You can check indicators such as signal strength and battery charge on the phone screen. Connection status Signal strength Battery charge

Conditions Poor

Not connected

Good

Full

“Rm”: Roaming area

Excellent

Empty

Poor

Indicators

Connection status

Battery charge

Call area

Signal strength

HIGHLANDER_U (OM48A12U)

386

5-9. Bluetooth® phone

Making a call Once a Bluetooth® phone is registered, you can make a call using the following procedure:

Dialing

Display the phone screen. (P. 384) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+” by selecting “” for a while. Press the

switch on the steering wheel or select

Dialing from the contacts list You can dial a number from the contact data imported from your cellu- lar phone. The system has one contact for each registered phone. Up to 2500 contacts may be stored in each contact. (P. 386)

Display the phone screen. (P. 384) Select “Contacts” tab. Choose the desired contact to call from the list. Choose the number and then press the wheel or select

switch on the steering

When the contact is empty You can transfer the phone numbers in a Bluetooth® phone to the sys- tem. Operation methods differ between PBAP (Phone Book Access Profile) compatible and PBAP incompatible Bluetooth® phones. If the cellular phone does not support either PBAP or OPP (Object Push Profile) service, you cannot transfer contacts.

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

387

Press the If the phonebook is empty, a message will be displayed.

switch on the steering wheel.

 For a PBAP compatible Bluetooth® phone and “Automatic Transfer”

is off Select the desired item.

“Always” and

Select to transfer new con- tacts from a cellular phone, select then enable “Automatic Transfer”. Select to transfer all the con- tacts from a connected cellu- lar phone only once. Select to cancel transferring.

 For a PBAP incompatible but OPP compatible Bluetooth® phone

Select the desired item.

Select to transfer the con- tacts from the connected cel- lular phone. Follow the steps in “Update con- tacts from phone” from “STEP2”. (P. 400) Select to add a new contact manually. Follow the steps in “Registering a new contact to the contacts list” from “STEP2”. (P. 401) Select to cancel transferring.

HIGHLANDER_U (OM48A12U)

388

5-9. Bluetooth® phone

Calling using favorites list You can make a call using numbers registered in the contact.

Display the phone screen. (P. 384) Select “Favorites” tab. Select the desired number to make a call.

Dialing from call history You can make a call using the call history, which has the 3 functions below.

: calls which you missed : calls which you received : calls which you made

Display the phone screen. (P. 384) Select “Call History” tab. Select  When

or the desired entry from the list. is selected

Check that the “Call” screen is displayed.

 When the desired contact is selected

Select the desired number. Check that the “Call” screen is displayed.

■Call history list

●If you make a call to or receive a call from a number registered in the con-

tact, the name is displayed in the call history.

●If you make multiple calls to the same number, only the last call made is dis-

played in the call history.

■International calls

You may not be able to make international calls, depending on the mobile phone in use.

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

389

Receiving a call When a call is received, the following screen is displayed together with a sound.

To answer the phone Press the ing wheel or select

switch on the steer-

To refuse a call Press the

switch on the steering wheel or select

To adjust the incoming call volume Turn the “PWR•VOL” knob. You can also adjust the volume using the steering switches.

■International calls

Received international calls may not be displayed correctly depending on the cellular phone in use.

HIGHLANDER_U (OM48A12U)

390

5-9. Bluetooth® phone

Speaking on the phone The following screen is displayed when speaking on the phone.

To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob.

To prevent the other party from hearing your voice Select “Mute”.

Inputting tones When using phone services such as an answering service or a bank, you can store phone numbers and code numbers in the contact.

Select “0-9”. Input the number.

■ Release Tones

“Release Tones” appear when a continuous tone signal(s) contain- ing a (w) is registered in the contact list.

Select “Release Tones”.

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

391

■Release Tones

●A continuous tone signal is a character string that consists of numbers and

the characters p or w. (e.g.056133w0123p#1)

●When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be auto- matically sent after a user operation is performed.

●Release tones can be used when automated operation of a phone based service such as an answering machine or bank phone service is desired. A phone number with continuous tone signals can be registered in the contact list.

●Tone data after a “w” pause tone can be operated on voice command during

a call.

HIGHLANDER_U (OM48A12U)

392

5-9. Bluetooth® phone

To transfer a call Select “Handset Mode” to on from a hands-free call to a cellular phone call. Select “Handset Mode” to off from a cellular phone call to a hands-free call.

Transmit volume setting

Select “Transmit Volume”. Select the desired level for the transmit volume. Select “OK”.

To hang up Press the

switch on the steering wheel or select

Call waiting When a call is interrupted by a third party while talking, an incoming call message will be displayed. To talk with the other party: • Press the

switch on the

steering wheel.

• Select To refuse the call: • Press the

steering wheel.

switch on the

• Select Every time you press the

during call waiting, you will be switched to the other party.

switch on the steering wheel or select

■Transferring calls

●If you transfer from the cellular phone to hands-free, the hands-free screen

will be displayed, and you can operate the system using the screen.

●Transfer method and operation may vary according to the cellular phone

used.

●For operation of the cellular phone in use, see the phone's manual.

■Call waiting operation

Call waiting operation may differ depending on your phone company and cel- lular phone.

HIGHLANDER_U (OM48A12U)

393

5-9. Bluetooth® phone Bluetooth® phone message function Received messages can be forwarded from the connected Bluetooth® phone, enabling checking and replying using the audio system. Depending on the type of Bluetooth® phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this func- tion cannot be used.

Displaying message inbox screen

Press

button.

Select

Receiving a message When an e-mail/SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen.

Select to check the message. Select to refuse the message. Select sender.

to call

the message

HIGHLANDER_U (OM48A12U)

394

5-9. Bluetooth® phone

■Receiving a message

●Depending on the cellular phone used for receiving messages, or its regis- tration status with the audio system, some information may not be dis- played.

●The pop up screen is separately available for incoming e-mail and SMS/

MMS messages under the following conditions: E-mail: • “Incoming E-mail Display” is set to “Full Screen”. (P. 406) • “E-mail Notification Popup” is set to on. (P. 406) SMS/MMS: • “Incoming SMS/MMS Display” is set to “Full screen”. (P. 406) • “SMS/MMS Notification Popup” is set to on. (P. 406)

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

395

Checking the messages

Display the message inbox screen. (P. 393) Select the desired message from the list. Check that the message is displayed.

Select

E-mails: “Mark Unread” or “Mark Read” to mark mail unread or read on the message inbox screen. This function is available when “Update Message Read Status on Phone” is set to on (P. 406) Select to make a call to the sender. Select to have messages read out. To cancel this function, select “Stop”. Select to display the previous or next message. Select to reply the message.

■Check the messages

●Depending on the type of Bluetooth® phone being connected, it may be nec-

essary to perform additional steps on the phone.

●Messages are displayed in the appropriate connected Bluetooth® phone’s

registered mail address folder. Select the tab of the desired folder to be displayed.

●Only received messages on the connected Bluetooth® phone can be dis-

played.

●The text of the message is not displayed while driving. ●When “Automatic Message Readout” is set to on, messages will be auto-

matically read out. (P. 406)

●Turn the “PWR•VOL” knob, or use the volume switch on the steering wheel

to adjust the message read out volume.

●The message read out function is available even while driving.

HIGHLANDER_U (OM48A12U)

396

5-9. Bluetooth® phone

Replying to a message

Display the message inbox screen. (P. 393) Select the desired message from the list. Select “Quick Message”. Select the desired message. Select “Send”.

■ Editing quick reply message

Select “Quick Message”. Select Select “OK” when editing is completed.

corresponding to the desired message to edit.

Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender's phone number.

Display the message inbox screen. (P. 393) Select the desired message. Select Check that the “Call” screen is displayed.

■ Calling from a number within a message

Calls can be made to a number identified in a message's text area.

Display the Message Inbox screen. (P. 393) Select the desired message. Select the text area. Select Check that the “Call” screen is displayed.

corresponding to the desired number.

■ Calling from the incoming message screen

P. 392

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

397

Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone.

Operating a telephone using the steering wheel switches

Volume switch • Increase/Decrease the vol-

ume

• Press and hold:

Continuously decrease the volume

increase/

Cursor switch • Select a list/tab Back switch • Return screen

to

the previous

Enter switch • Select an item On hook switch • End a call • Refuse a call Off hook switch • Make a call • Receive a call • Display “Phone” screen

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

398
Bluetooth® phone settings You can adjust the hands-free system to your desired settings.

“Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen.

13

14

Set the phone connection (P. 377) Setting the sound (P. 398) Contact/Call History Settings (P. 399) Set the message settings (P. 406) Set the phone display (P. 407)

Sound setting

Display the “Phone/Message Settings” screen. (P. 398) Select “Sound Settings” on the “Phone/Message Settings” screen.

13

incoming

the desired

Set the desired ringtone. Adjust the ringtone volume. Adjust the message readout volume. Set SMS/MMS tone. Adjust the incoming SMS/ MMS tone volume. Set the incoming e-mail tone. Adjust the incoming e-mail tone volume. Adjust the default volume of the other party's voice.

■To return to the default volume settings

Select “Default”, and then “Yes”.

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

399

Contact/Call History Settings The contact can be transferred from a Bluetooth® phone to the sys- tem. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed.

PBAP

to update contacts

Display the “Phone/Message Settings” screen. (P. 398) Select “Contact/Call History Settings”. Select the desired item to be set. compatible For Bluetooth® phones, select to set automatic contact/history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred. Select from the connected phone. (P. 400) Select to sort contacts by the first name or last name field. Select to add contacts to the favorites list. (P. 403) Select to delete contacts from the favorites list. (P. 405) Select to clear contacts from the call history.* Select to add new contacts to the contact list.* (P. 401) Select to edit contacts in the contact list.* (P. 402) Select to delete contacts from the contact list.* (P. 403) Select to reset all setup items.

10

*: For PBAP compatible Bluetooth® phones only, this function is available

when “Automatic Transfer” is set to off. (P. 399)

HIGHLANDER_U (OM48A12U)

400

5-9. Bluetooth® phone

Update contacts from phone Operation methods differ between PBAP compatible and PBAP incompatible but OPP compatible Bluetooth® phones. If your cellular phone is neither PBAP nor OPP compatible, the con- tacts cannot be transferred. ■ For PBAP Compatible Bluetooth® Phones

Select “Update Contacts from Phone”. Check that a confirmation screen is displayed when the opera- tion is complete. This operation may be unnecessary depending on the type of cellular phone. Depending on the type of cellular phone, OBEX authentication may be required when the Bluetooth® phone. If another Bluetooth® device is connected when transferring contact data, depending on the phone, the connected Bluetooth® device may need to be disconnected. Depending on the type of Bluetooth® phone being connected, it may be necessary to perform additional steps on the phone.

transferring contact data. Enter “1234”

into

Incompatible but OPP compatible Bluetooth®

■ For PBAP

Phones

Select “Update Contacts from Phone”. Transfer the contact data to the system using a Bluetooth® phone. This operation may be unnecessary depending on the type of cellular phone. Depending on the type of cellular phone, OBEX authentication may be required when the Bluetooth® phone. To cancel this function, select “Cancel”. Select “Done” when it appears on the screen. Check that a confirmation screen is displayed when the opera- tion is complete.

transferring contact data. Enter “1234”

into

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

401

■ Updating the contacts in a different way (From the “Call His-

tory” screen) For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 399)

Display the phone screen. (P. 384) Select the “Call History” tab and select a contact not yet regis- tered in the contact list. Select “Update Contact”. Select the desired contact. Select a phone type for the phone number.

Registering a new contact to the contact list New contact data can be registered. Up to 4 numbers per person can be registered. For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 399)

Select “New Contact”. Enter the name and select “OK”. Enter the phone number and select “OK”. Select the phone type for the phone number. To add another number to this contact, select “Yes”.

■ Registering a new contact in a different way (From the “Call

History” screen)

Display the phone screen. (P. 384) Select the “Call History” tab and select a contact not yet regis- tered in the contact list. Select “Add to Contacts”. Follow the steps in “Registering a new contact to the contacts list” from “STEP 3”. (P. 401)

HIGHLANDER_U (OM48A12U)

402

5-9. Bluetooth® phone

Editing the contact data For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 399)

Select “Edit Contact”. Select the desired contact. Select Follow the steps in “Registering a new contact to the contacts list” from “STEP 4”. (P. 401)

corresponding to the desired name or number.

■ Editing the contacts in a different way (From the “Contact

Details” screen)

Display the phone screen. (P. 384) Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact. Select “Edit Contact”. “E-mail Addresses”: Select to display all registered e-mail addresses for the contact. Follow the steps in “Registering a new contact to the contacts list” from “STEP 4”. (P. 401)

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

403

Deleting the contact data For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 399)

Select “Delete Contacts”. Select the desired contact and select “Delete”. Select “Yes” when the confirmation screen appears.

13

■ Deleting the contact in a different way (From the “Contact

Details” screen)

Display the phone screen. (P. 384) Select the “Contacts”, “Call history” tab or the “Favorites” tab and select the desired contact. Select “Edit Contact”. Select “Yes” when the confirmation screen appears.

Favorites list setting Up to 15 contacts (maximum of 4 numbers per contact) can be regis- tered in the favorites list. ■ Registering the contacts in the favorites list

Select “Add Favorite”. Select the desired contact to add to the favorites list. Dimmed contacts are already stored as a favorite. Check that a confirmation screen is displayed when the opera- tion is complete.

HIGHLANDER_U (OM48A12U)

404

5-9. Bluetooth® phone

 When 15 contacts have already been registered to the favorites list When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact. Select the contact to be replaced. Check that a confirmation screen is displayed when the operation is complete.

 Registering contacts in the favorites list in a different way (from the

“Contacts” screen) Display the phone screen. (P. 384) Select the “Contacts” tab. Select registered in the favorites list. When selected, favorites list.

is changed to

at the beginning of the desired contact list name to be

, and the contact is registered in the

 Registering contacts in the favorites list in a different way (from the

“Contact Details” screen) Display the phone screen. (P. 384) Select the “Contacts” tab or the “Call History” tab and select the desired contact. Select “Add Favorite”. Check that a confirmation screen is displayed when the operation is complete.

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

405

■ Deleting the contacts in the favorites list

Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the opera- tion is complete.

 Deleting contacts in the favorites list in a different way (from the

“Contacts” screen) Display the phone screen. (P. 384) Select the “Contacts” tab. Select from the favorites. list. When selected,

is changed to

at the beginning of the contact list name to be deleted

, and the data is deleted from the list.  Deleting contacts in the favorites list in a different way (from the

“Contact Details” screen) Display the phone screen. (P. 384) Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact to delete. Select “Remove Favorite”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the operation is complete.

HIGHLANDER_U (OM48A12U)

406

5-9. Bluetooth® phone

Message Settings

Display the “Phone/Message Settings” screen. (P. 398) Select “Messaging Settings”. Select the desired item to be set. automatic message

automatic message

the e-mail notification

Set transfer on/off. Set readout on/off. Set the SMS/MMS notifica- tion popup on/off. Set popup on/off. Set adding the vehicle signa- ture to outgoing messages on/off. Set updating message read status on phone on/off. Change the incoming SMS/MMS display. “Full Screen”: When an SMS/MMS message is received, the incoming SMS/MMS display screen is displayed and can be operated on the screen. “Drop-Down”: When an SMS/MMS message is received, a message is displayed on the upper side of the screen. Change the incoming e-mail display. “Full Screen”: When an e-mail is received, the incoming e-mail display screen is the displayed and can be operated on the screen. “Drop-Down”: When an e-mail is received, a message is displayed on the upper side of the screen. Set display of messaging account names on the inbox tab on/off. When set to on, messaging account names used on the cellular phone will be displayed.

■To return to the default volume settings

Select “Default”, and then “Yes”.

HIGHLANDER_U (OM48A12U)

■ Displaying the “Messaging Settings” screen in a different way

5-9. Bluetooth® phone

407

Display the phone screen. (P. 384) Select Select “Settings”.

Phone Display Settings

Display the “Phone/Message Settings” screen. (P. 398) Select “Phone Display Settings”. Select the desired item to be set. incoming call

the

Change display. “Full Screen”: When a call is received, the hands-free screen is displayed and can be oper- ated on the screen. “Drop-Down”: A message is dis- played on the upper side of the screen. Set display of the contact/ history transfer completion message on/off.

HIGHLANDER_U (OM48A12U)

408

5-9. Bluetooth® phone

What to do if... (Troubleshooting) If there is a problem with the hands-free system or a Bluetooth® device, first check the table below.  When using the hands-free system with a Bluetooth® device The hands-free system or Bluetooth® device does not work. The connected device may not be a compatible Bluetooth® cellular phone.  For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune/enside.html

The Bluetooth version of the connected cellular phone may be older than the specified version.  Use a cellular phone with Bluetooth version 2.0 or higher (recom-

mended: Ver. 3.0 with EDR or higher). (P. 412)

HIGHLANDER_U (OM48A12U)

5-9. Bluetooth® phone

409

 When registering/connecting a cellular phone A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone.  Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side.  Complete the registration operation on the cellular phone (approve

registration on the phone).

Old registration information remains on either this system or the cellular phone.  Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system. (P. 378)

A Bluetooth® connection cannot be made. Another Bluetooth® device is already connected.  Manually connect the cellular phone you wish to use to this sys-

tem. (P. 380)

Bluetooth® function is not enabled on the cellular phone.  Enable the Bluetooth® function on the cellular phone. “Please check your device settings.” message is displayed. Bluetooth® function is not enabled on the cellular phone.  Enable the Bluetooth® function on the cellular phone. Old registration information remains on either this system or the cellular phone.  Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system. (P. 378)

 When making/receiving a call A call cannot be made/received. Your vehicle is in a “Out of cellular service area. Please try again later.” area.  Move to where “Out of cellular service area. Please try again later.”

no longer appears on the display.