2012 Toyota Camry Owners Manual

10 A 15 A 15 A*3
20 A*4
15 A*3
20 A*4

7.5 A

Manual headlight leveling system

28 EFI-MAIN NO.1

30 A

Multiport fuel injection system/ sequential multiport fuel injection system, EFI NO.2, EFI NO.3, A/F sensor No circuit Electronic throttle control system No circuit Multiport fuel injection system/ sequential multiport fuel injection system, electronic controlled trans- mission

5 A 10 A 20 A

7.5 A

20 A

A/F sensor

7.5 A

Smart key system

29 SMART 30 ETCS 31 TOWING

32 EFI NO.1

33

EFI-MAIN NO.2*2
A/F*1
34 AM2

394

4-3. Do-it-yourself maintenance

Fuse 35 RADIO-B

36 DOME

Ampere

20 A

7.5 A

37 ECU-B NO.1

10 A

38 SPARE 39 SPARE

25 A 30 A

Circuit

Audio system, navigation system Clock, vanity lights, interior lights, personal lights, trunk light, door courtesy lights Multiplex communication system, smart key system, gauge and meters, tire pressure warning sys- tem, wireless remote control, steer- ing sensor, front passenger occupant classification system, Blind Spot Monitor Spare fuse Spare fuse

*1: 3.5 L V6 (2GR-FE) engine *2: 2.5 L 4-cylinder (2AR-FE) engine *3: Vehicles with halogen headlight *4: Vehicles with discharge headlight

395

4-3. Do-it-yourself maintenance

■ Under the instrument panel

Fuse

Ampere

Circuit

ECU-IG1 NO.2

10 A

ECU-IG1 NO.1

10 A

PANEL

10 A

Shift lock control system, seat heaters, smart key system, tire pressure warning system, wireless remote control, multiplex communi- cation system, audio system, navi- gation system, moon roof, auto anti-glare inside rear view mirror Vehicle stability control system, electric cooling fans, steering sen- sor, multiport fuel injection system/ sequential multiport fuel injection system, charging system, rear win- dow defogger, outside rear view mirror defoggers, Blind Spot Moni- tor Switch illumination, air condition- ing system, shift lever light, glove box light, interior lights, personal lights, audio system, navigation system

396

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

TAIL

EPS-IG1
ECU-IG1 NO.3
S/HTR&FAN F/L H-LP LVL 9 WASHER 10 A/C-IG1
11 WIPER

15 A

7.5 A 7.5 A

10 A

7.5 A 10 A 7.5 A 25 A

12 BKUP LP

7.5 A

13 DOOR NO.1
14 WIPER-S 15 P/OUTLET RR 16 SFT LOCK-

ACC

17 DOOR R/R 18 DOOR R/L 19 OBD

20 ECU-B NO.2

21 DOOR NO.2

22 AM1

30 A 5 A 20 A

5 A

20 A 20 A 10 A

10 A

20 A

7.5 A

Parking lights, side marker lights, tail lights, license plate lights, fog lights Electric power steering Blind Spot Monitor

Seat heaters

No circuit Windshield wipers and washer Air conditioning system Windshield wipers and washer Back-up lights, multiport fuel injec- tion system/sequential multiport fuel injection system, electronic controlled transmission, audio sys- tem, navigation system Power windows No circuit Power outlet

Shift lock control system

Rear right-hand power windows Rear left-hand power windows On-Board diagnosis system Smart key system, tire pressure warning system Power windows Multiport fuel injection system/ sequential multiport fuel injection system, starter system

397

4-3. Do-it-yourself maintenance

Fuse

Ampere

Circuit

23 STOP

7.5 A

24 P/SEAT RR 25 A/C-B 26 S/ROOF 27 P/SEAT FR 28 PSB

29 D/L-AM1

30 TI&TE

31 A/B

30 A 7.5 A 10 A 30 A 30 A

20 A

20 A

10 A

32 ECU-IG2 NO.1

7.5 A

33 ECU-IG2 NO.2

7.5 A

Tail lights, multiport fuel injection system/sequential multiport fuel injection system, vehicle stability control system, anti-lock brake sys- tem, electronic controlled transmis- sion, high mounted stoplight, smart key system, shift lock control sys- tem No circuit Air conditioning system Moon roof Power seats No circuit Multiplex communication system, power door lock, trunk opener switch No circuit Front passenger occupant classifi- cation system, SRS airbag system Multiport fuel injection system/ sequential multiport fuel injection system Smart key system, Blind Spot Mon- itor

34 CIG&P/ OUTLET

15 A

Power outlet

35 ECU-ACC

7.5 A

Clock, outside rear view mirrors, multiplex communication system, audio system, navigation system

36 S/HTR&FAN F/

37 S/HTR RR

10 A

20 A

Seat heaters

No circuit

398

4-3. Do-it-yourself maintenance

■After a fuse is replaced

●If the lights do not turn on even after the fuse has been replaced, a bulb

may need replacement. (→P. 401)

●If the replaced fuse blows again, have the vehicle inspected by your

Toyota dealer.

■If there is an overload in a circuit

The fuses are designed to blow, protecting the wiring harness from damage.

■When replacing light bulbs

Toyota recommends that you use genuine Toyota products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable.

399

4-3. Do-it-yourself maintenance

CAUTION

■To prevent system breakdowns and vehicle fire

Observe the following precautions. Failure to do so may cause damage, and possibly a fire or injury. ●Never use a fuse of a higher amperage rating than that indicated, or use

any other object in place of a fuse.

●Always use a genuine Toyota fuse or equivalent.

Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.

●Do not modify the fuses or fuse boxes.

NOTICE

■Before replacing fuses

Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.

400

4-3. Do-it-yourself maintenance Light bulbs

You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. ■ Preparing for light bulb replacement

Check the wattage of the light bulb to be replaced. (→P. 477)

■ Front bulb locations

Headlight low beam (halogen bulb) Headlight high beam and daytime running light

Front side marker light Front turn signal/park- ing light

Fog light (if equipped)

401

4-3. Do-it-yourself maintenance

■ Rear bulb locations

Rear side marker light Stop/tail light

Replacing light bulbs

Rear turn signal light Back-up light

License plate lights

■ Headlight high beam and daytime running light STEP 1

Turn the bulb base counterclock- wise.

STEP 2

Unplug depressing the lock release.

the connector while

402

4-3. Do-it-yourself maintenance

■ Headlight low beam (halogen bulb) STEP 1

Turn the bulb base counterclock- wise.

STEP 2

Unplug depressing the lock release.

the connector while

■ Fog light (if equipped) STEP 1

Turn the steering wheel in the opposite direction of the fog light that you wish to replace.

if you wish

to For example, replace the fog light on the left side, turn the steering wheel to the right.

403

4-3. Do-it-yourself maintenance

STEP 2

STEP 3

Remove the fender liner clip.

After turning the clip, pull the clip until it stops. Turn the clip again, and then pull out the clip.

Partly remove the fender liner and unplug the connector while depressing the lock release.

STEP 4

Turn the bulb base counterclock- wise.

404

4-3. Do-it-yourself maintenance

■ Front turn signal/parking light STEP 1

Turn the bulb base counterclock- wise.

STEP 2

Remove the light bulb.

■ Front side marker light STEP 1

Turn the bulb base counterclock- wise.

405

4-3. Do-it-yourself maintenance

STEP 2

Remove the light bulb.

■ Rear side marker light, rear turn signal light and stop/tail light Open the trunk lid and remove STEP 1
the luggage trim cover clips.

STEP 2

The button

Pull the hook while depressing the button.

STEP 3

Partly remove the luggage trim cover.

406

STEP 4

STEP 5

4-3. Do-it-yourself maintenance

Turn the bulb base counterclock- wise.

Rear side marker light Rear turn signal light Stop/tail light

Remove the light bulb.

Rear side marker light Rear turn signal light Stop/tail light

■ Back-up light STEP 1

Open the trunk lid and remove the clips. Then partly remove the trunk panel cover.

STEP 2

Unplug depressing the lock release.

the connector while

407

4-3. Do-it-yourself maintenance

STEP 3

Turn the bulb base counterclock- wise.

STEP 4

Remove the light bulb.

■ License plate light STEP 1

Remove the lens.

Insert a properly sized Allen key into the hole of the lens, and pry off the lens as shown in the illus- tration. To prevent damaging the vehicle, wrap the tip of the Allen key with a tape.

STEP 2

Remove the light bulb.

408

4-3. Do-it-yourself maintenance

■ Lights other than the above

If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlight low beams (discharge bulb) ● High mounted stoplight

■Discharge headlights (if equipped)

If voltage to the discharge bulbs is insufficient, the bulbs may not come on, or may go out temporarily. The discharge bulbs will come on when normal power is restored. ■LED light bulbs

The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.

■Condensation build-up on the inside of the lens

Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. ●Large drops of water have built up on the inside of the lens. ●Water has built up inside the headlight.

409

4-3. Do-it-yourself maintenance

■Removing and installing the clips

The luggage trim cover and trunk panel cover clip

Removing Installing

The fender liner clip

Installing

■When replacing light bulbs

→P. 399

CAUTION

■Replacing light bulbs

●Turn off the lights. Do not attempt to replace the bulb immediately after

turning off the lights. The bulbs become very hot and may cause burns.

●Do not touch the glass portion of the light bulb with bare hands. Hold the

bulb by the plastic or metal portion. If the bulb is scratched or dropped, it may blow out or crack.

●Fully install light bulbs and any parts used to secure them. Failure to do so may result in heat damage, fire, or water entering the headlight unit. This may damage the headlights or cause condensation to build up on the lens.

410

CAUTION

Metal components

4-3. Do-it-yourself maintenance

●Vehicles with discharge headlights:

While the low beam headlights are turned on, and for a short time after they have been turned off, metal com- ponents at the rear of the headlight assembly will be extremely hot. To pre- vent burns, do not touch these metal components until you are certain they have cooled down.

■Discharge headlights (if equipped)

●Contact your Toyota dealer before replacing the discharge headlights

(including light bulbs).

●Do not touch the discharge headlight’s high voltage socket when the head-

lights are turned on. An extremely high voltage of 30000 V will be discharged and could result in serious injury or death by electric shock.

●Do not attempt to take apart or repair the low beam discharge headlight

bulbs, connectors, power supply circuits, or related components. Doing so could result in electric shock and serious injury or death.

■To prevent damage or fire

Make sure bulbs are fully seated and locked.

411

4-3. Do-it-yourself maintenance

412

5-1. Essential information Emergency flashers

Use the emergency flashers if the vehicle malfunctions or is involved in an accident.

Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.

NOTICE

■To prevent battery discharge

Do not leave the emergency flashers on longer than necessary when the engine is not running.

414

5-1. Essential information If your vehicle needs to be towed

If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.

Before towing

The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. ● The engine is running but the vehicle will not move. ● The vehicle makes an abnormal sound.

Towing with a sling-type truck

Do not tow with a sling-type truck to prevent body damage.

415

5-1. Essential information

Towing with a wheel-lift type truck

From the front

Release the parking brake.

From the rear

Use a towing dolly under the front wheels.

Using a flatbed truck

416

If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged.

5-1. Essential information

NOTICE

■To prevent causing serious damage to the transmission when towing

using a wheel-lift type truck Never tow this vehicle from the rear with the front wheels on the ground.

■To prevent damage to the vehicle when towing using a wheel-lift type

truck When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.

■To prevent body damage when towing with a sling-type truck

Do not tow with a sling-type truck, either from the front or rear.

417

5-1. Essential information If you think something is wrong

If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms

● Fluid leaks under the vehicle

(Water dripping from the air conditioning after use is normal.)

● Flat-looking tires or uneven tire wear ● The rightmost segment of the engine coolant temperature dis-

play flashes

■ Audible symptoms

● Changes in exhaust sound ● Excessive tire squeal when cornering ● Strange noises related to the suspension system ● Pinging or other noises related to the engine

■ Operational symptoms

● Engine missing, stumbling or running roughly ● Appreciable loss of power ● Vehicle pulls heavily to one side when braking ● Vehicle pulls heavily to one side when driving on a level road ● Loss of brake effectiveness, spongy feeling, pedal almost

touches the floor

418

5-1. Essential information Fuel pump shut off system

To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine.

Follow the procedure below to restart the engine after the system is activated.

Vehicles without a smart key system STEP 1

Turn the engine switch to the “ACC” or “LOCK” position. Restart the engine.

STEP 2

Vehicles with a smart key system STEP 1

Turn the “ENGINE START STOP” switch off. Restart the engine.

STEP 2

NOTICE

■Before starting the engine

Inspect the ground under the vehicle. If you find that fuel has leaked on to the ground, the fuel system has been damaged and is in need of repair. Do not restart the engine.

419

5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds...

Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer.

Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.

The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer.

Warning light

Warning light/Details

Brake system warning light (warning buzzer)* • Low brake fluid • Malfunction in the brake system This light also comes on when the parking brake is not released. If the light turns off after the parking brake is fully released the system is operating normally.

(U.S.A.)

(Canada)

*: Parking brake engaged warning buzzer: The buzzer sounds to indicate that the parking brake is still engaged (with the vehicle having reached a speed of 3 mph [5 km/h]).

420

5-2. Steps to take in an emergency

Stop the vehicle immediately.

The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer.

Warning light

Warning light/Details

Charging system warning light Indicates a malfunction in the vehicle’s charging system.

Low engine oil pressure warning light Indicates that the engine oil pressure is too low.

High engine coolant temperature warning light (the rightmost segment of the engine coolant temperature display flashes) Indicates that the engine is almost overheating. (→P. 459)

Type A

Type B

Have the vehicle inspected by your Toyota dealer immediately.

Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately.

Warning light

Warning light/Details

Malfunction indicator lamp Indicates a malfunction in: • The electronic engine control system; or • The electronic throttle control system; or • The electronic automatic transmission control system.

(U.S.A.)

(Canada)

421

5-2. Steps to take in an emergency

Warning light

Warning light/Details

SRS warning light Indicates a malfunction in: • The SRS airbag system; or • The front passenger occupant classification system; or • The seat belt pretensioner system.

ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system.

Cruise control indicator light Indicates a malfunction in the cruise control system. →P. 199

Slip indicator light Indicates a malfunction in: • VSC system; or • TRAC system. Electric power steering system warning light (warning buzzer) Indicates a malfunction in the EPS system.

BSM warning light (if equipped) Indicates a malfunction in the Blind Spot Monitor.

Smart key system indicator light (if equipped) Indicates a malfunction in the smart key system.

(U.S.A.)

(Canada)

(Comes on in

yellow)

(Comes on)

(Comes on)

(Flashes in yellow for 15 seconds.)

422

5-2. Steps to take in an emergency

Follow the correction procedures.

After taking the specified steps to correct the suspected problem, check that the warning light goes off.

Warning light

Warning light/Details

Correction procedure

Open door warning light (warning buzzer)*1
Indicates that a door or the trunk is not fully closed. Low fuel level warning light Indicates remaining fuel is approximately 2.6 gal. (9.7 L, 2.1 Imp. gal.) or less. Driver’s/front passen- ger’s seat belt reminder light (warning buzzer)*2
Warns the driver/front pas- senger to fasten his/her seat belt. Low windshield washer fluid warning light Low level of washer fluid.

Check that all doors and the trunk are closed.

Refuel the vehicle.

Fasten the seat belt.

Fill the tank.

423

5-2. Steps to take in an emergency

Warning light

(U.S.A. only)

Warning light/Details Maintenance required reminder light Indicates that mainte- nance is required accord- ing to the driven distance on the maintenance schedule*3. Illuminates for about 3 sec- onds and then flashes for about 15 seconds approxi- mately 4500 miles (7200 km) after the maintenance data has been reset. Comes on and remains on if the distance driven exceeds 5000 miles (8000 km) after the maintenance data has been reset. (The indicator will not work properly unless the mainte- nance data has been reset.)

Correction procedure

If necessary, perform main- tenance.

Perform the necessary maintenance. Please reset the mainte- nance data after the mainte- nance is performed. (→P. 340)

424

5-2. Steps to take in an emergency

Warning light

Warning light/Details Tire pressure warning light

Correction procedure

When the light comes on: Low tire inflation pressure such as • Natural causes (→P. 430) • Flat tire (→P. 435)

(U.S.A. only)

When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system. (→P. 432)

Adjust the tire inflation pressure to the specified level. The light will turn off after a few minutes. In case the light does not turn off even if the tire inflation pressure is adjusted, have the system checked by your Toyota dealer.

Have the system checked by your Toyota dealer.

*1: Open door warning buzzer:

The open door warning buzzer sounds to alert the driver that one or more of the doors is not fully closed (with the vehicle having reached a speed of 3
mph [5 km/h]).

*2: Driver’s seat belt buzzer:

Vehicles without a smart key system The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened. Once the engine switch is turned to the “ON” position, the buzzer sounds for 6 seconds. If the vehicle reaches a speed of 12 mph (20 km/h), the buzzer sounds once. If the seat belt is still unfastened after 30
seconds, the buzzer will sound intermittently for 10 seconds. Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20
more seconds.

425

5-2. Steps to take in an emergency

Vehicles with a smart key system The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened. Once the “ENGINE START STOP” switch is turned to ON mode, the buzzer sounds for 6 seconds. If the vehicle reaches a speed of 12 mph (20 km/h), the buzzer sounds once. If the seat belt is still unfas- tened after 30 seconds, the buzzer will sound intermittently for 10 seconds. Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds. Front passenger’s seat belt buzzer: The front passenger’s seat belt buzzer sounds to alert the front passenger that his or her seat belt is not fastened. The buzzer sounds once if the vehi- cle reaches a speed of 12 mph (20 km/h). If the seat belt is still unfastened after 30 seconds, the buzzer will sound intermittently for 10 seconds. Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds.

*3: Refer to the separate “Scheduled Maintenance Guide” or “Owner’s Manual

Supplement” for the maintenance interval applicable to your vehicle.

426

5-2. Steps to take in an emergency

Follow the correction procedures. (vehicles with a smart key system)

After taking the specified steps to correct the suspected problem, check that the warning light goes off.

Interior buzzer

Exterior buzzer

Warning

light

Warning light/Details

Correction procedure

Continuous Continuous

(Flashes in yellow)

Once

3 times

(Flashes in yellow)

Once

3 times

(Flashes in yellow)

Smart key system indicator light The electronic key was car- ried outside the vehicle and the driver’s door was opened and closed while any shift position other than P was selected without turning off the “ENGINE START STOP” switch. Smart key system indicator light The electronic key was car- ried outside the vehicle and the driver’s door was opened and closed while the shift position P was selected with- out turning off the “ENGINE START STOP” switch. Smart key system indicator light Indicates that a door other than the driver’s door has been opened and closed with the “ENGINE START STOP” switch in any mode other than off and the electronic key outside of the detection area.

• Change the shift position to P. • Bring the electronic key back into the vehicle.

Turn the “ENGINE START STOP” switch off or bring the electronic key back into the vehicle.

Confirm the location of the electronic key.

427

5-2. Steps to take in an emergency

Interior buzzer

Exterior buzzer

Warning

light

Warning light/Details

Smart key system indicator light An attempt was made to exit the vehicle with the elec- tronic key and lock the doors without first turning the “ENGINE START STOP” switch off.

Smart key system indicator light Indicates that the electronic key is not present when attempting to start the engine.

Smart key system indicator light An attempt was made to drive when the regular key was not inside the vehicle.

Correction procedure

Turn the “ENGINE START STOP” switch off and lock the doors again.

Confirm the location of the electronic key.

Confirm that the electronic key is inside the vehicle.

Smart key system indicator light Indicates that the electronic key battery is low.

Replace the battery. (→P. 384)

Smart key system indicator light Indicates that the steering lock has not been released.

Release the steering lock. (→P. 152)

Once

Continuous (5 seconds)

(Flashes in yellow)

(Flashes in yellow for 15 seconds.)

(Flashes in yellow)

(Flashes in yellow for 15 seconds.)

(Flashes quickly in green for 15 sec- onds.)

Once

⎯

9 times ⎯

Once

⎯

Once

⎯

428

5-2. Steps to take in an emergency

Interior buzzer

Exterior buzzer

Warning

light

Warning light/Details

Correction procedure

Once

⎯

(Flashes in yellow for 30 seconds.)

Smart key system indicator light • When

the doors were unlocked with the mechani- cal key and the “ENGINE START STOP” switch was pressed, the electronic key could not be detected in the vehicle.

then

• The electronic key could not be detected in the vehi- cle even after the “ENGINE START STOP” switch was pressed two consecutive times.

Touch the electronic key to the “ENGINE START STOP” switch while depressing the brake pedal.

■SRS warning light

This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sen- sors, driver's seat belt buckle switch, front passenger occupant classification system (ECU and sensors), “AIR BAG ON” indicator light, “AIR BAG OFF” indicator light, front passenger's seat belt buckle switch, seat belt preten- sioner assemblies, airbags, interconnecting wiring and power sources. (→P. 100)

■Front passenger detection sensor, passenger seat belt reminder and

warning buzzer ●If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash and the warning buzzer to sound even if a passenger is not sitting in the seat.

●If a cushion is placed on the seat, the sensor may not detect a passen-

ger, and the warning light may not operate properly.

429

5-2. Steps to take in an emergency

■If the malfunction indicator lamp comes on while driving

First check the following: ●Is the fuel tank empty?

If it is, fill the fuel tank immediately.

●Is the fuel tank cap loose?

If it is, tighten it securely.

The malfunction indicator lamp will go off after several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible.

■When the tire pressure warning light comes on (if equipped)

Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire pressure warning reset switch will not turn off the tire pressure warning light.

■The tire pressure warning light may come on due to natural causes

(vehicles with a tire pressure warning system) The tire pressure warning light may come on due to natural causes such as natural air leaks and tire inflation pressure changes caused by tem- perature. In this case, adjusting the tire inflation pressure will turn off the warning light (after a few minutes).

430

5-2. Steps to take in an emergency

■When a tire is replaced with a spare tire (vehicles with a tire pres-

sure warning system) The compact spare tire is not equipped with a tire pressure warning valve and transmitter. If a tire goes flat, the tire pressure warning light will not turn off even though the flat tire has been replaced with the spare tire. Replace the spare tire with the repaired tire and adjust the tire infla- tion pressure. The tire pressure warning light will go off after a few min- utes.

■If the tire pressure warning system is not functioning (vehicles with

a tire pressure warning system) The tire pressure warning system will be disabled in the following condi- tions: (When the condition becomes normal, the system will work properly.) ●If tires not equipped with tire pressure warning valves and transmit-

ters are used

●If the ID code on the tire pressure warning valves and transmitters is

not registered in the tire pressure warning computer.

●If the tire inflation pressure is 73 psi (500 kPa, 5.1 kgf/cm2 or bar) or

higher

The tire pressure warning system may be disabled in the following condi- tions: (When the condition becomes normal, the system will work properly.) ●If electronic devices or facilities using similar radio wave frequencies

are nearby.

●If a radio set at a similar frequencies is in use in the vehicle ●If a window tint that affects the radio wave signals is installed ●If there is a lot of snow or ice on the vehicle, particularly around the

wheels or wheel housings

●If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●If tire chains are used

431

5-2. Steps to take in an emergency

■If the tire pressure warning light frequently comes on after blinking

for 1 minute (vehicles with a tire pressure warning system) If the tire pressure warning light frequently comes on after blinking for 1
minute when the engine switch (vehicles without a smart key system) or the “ENGINE START STOP” switch (vehicles with a smart key system) is turned on, have it checked by your Toyota dealer.

■Electric power steering system warning light (warning buzzer)

The electric power steering system warning light may come on and the warning buzzer may sound when the voltage is low or the voltage drops.

■Customization that can be configured at Toyota dealer

The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features →P. 493) However, Toyota recommends that the seat belt reminder buzzer be operational to alert the driver and front passen- ger that the seat belts are not fastened.

CAUTION

■When the electric power steering system warning light comes on

The steering wheel may become extremely heavy. If the steering wheel becomes heavier than usual when operating, hold firmly and operate using more force than usual.

■If the tire pressure warning light comes on (vehicles with a tire

pressure warning system) Be sure to observe the following precautions. Failure to do so could cause loss of vehicle control and result in death or serious injury. ●Stop your vehicle in a safe place as soon as possible. Adjust the tire

inflation pressure immediately.

●If the tire pressure warning light comes on even after tire inflation pres- sure adjustment, it is probable that you have a flat tire. Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest Toyota dealer.

●Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate,

you could lose control of the steering wheel or the brakes.

432

5-2. Steps to take in an emergency

CAUTION

■If a blowout or sudden air leakage should occur (vehicles with a tire

pressure warning system) The tire pressure warning system may not activate immediately.

■Maintenance of the tires (vehicles with a tire pressure warning sys-

tem) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a differ- ent size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (tire pressure warning light) illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under- inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).

433

5-2. Steps to take in an emergency

CAUTION

Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illumi- nated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illumi- nated, the system may not be able to detect or signal low tire pressure as intended. TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly. Always check the TPMS (tire pres- sure warning system) malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alter- nate tires and wheels allow the TPMS (tire pressure warning system) to continue to function properly.

NOTICE

■Precaution when installing a different tire (vehicles with a tire pres-

sure warning system) When a tire of a different specification or maker is installed, the tire pres- sure warning system may not operate properly.

434

5-2. Steps to take in an emergency If you have a flat tire

Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle

● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P. ● Stop the engine. ● Turn on the emergency flashers.

■ Location of the spare tire, jack and tools

Jack

Jack handle

Luggage floor cover

Spare tire cover

Wheel nut wrench

Spare tire

435

5-2. Steps to take in an emergency

Taking out the jack

STEP 1

Remove the luggage floor cover and spare tire cover.

STEP 2

Remove the jack.

436

5-2. Steps to take in an emergency

Taking out the spare tire

STEP 1

Remove the luggage floor cover and spare tire cover.

STEP 2

Remove the tool tray.

STEP 3

Loosen the center fastener that secures the spare tire.

When taking out or stowing the spare tire, make sure to firmly hold opposite ends of the tire.

437

5-2. Steps to take in an emergency

Replacing a flat tire

STEP 1

Chock the tires.

Flat tire

Wheel

chock posi-

tions

Front

Rear

Left- hand side

Right- hand side

Left- hand side

Right- hand side

Behind the rear right- hand side tire Behind the rear left- hand side tire In front of the front right-hand side tire In front of the front left-hand side tire

For vehicles with steel wheels, remove the wheel ornament using the wrench.

To protect the wheel ornament, place a rag between the wrench and the wheel ornament, as shown in the illustration.

STEP 2

438

STEP 3

STEP 4

5-2. Steps to take in an emergency

Slightly loosen the wheel nuts (one turn).

Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point.

The jack point guides are located under the rocker panel. They indicate the jack point positions.

STEP 5

Raise the vehicle until the tire is slightly raised off the ground.

439

5-2. Steps to take in an emergency

STEP 6

Installing the spare tire

STEP 1

Remove all the wheel nuts and the tire.

When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.

Remove any dirt or foreign mat- ter from the wheel contact sur- face.

If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.

STEP 2

Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.

Tapered portion

When replacing a steel wheel with a steel wheel, tighten the wheel nuts until the tapered por- tion comes into loose contact with the disc wheel seat.

Disc wheel seat

440

5-2. Steps to take in an emergency

Tapered portion

When replacing an aluminum wheel with a steel wheel, tighten the wheel nuts until the tapered portion comes into loose contact with the disc wheel seat.

Disc wheel seat

STEP 3

Lower the vehicle.

STEP 4

Firmly tighten each wheel nut two or three times in the order shown in the illustration.

Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m)

STEP 5

Stow the flat tire, tire jack and all tools.

441

5-2. Steps to take in an emergency

■The compact spare tire

●The compact spare tire is identified by the label “TEMPORARY USE