2010 Toyota Camry Owners Manual

SRS driver airbag P. 87

Floor mat P. 335

SRS front passenger airbag P. 87

Armrest P. 332

Cup holder P. 319

Console box P. 317

Glove box P. 317

Front seats P. 51

SRS side airbags P. 87

A

Vehicles with moon roof

Vanity mirrors P. 325
Sun visors P. 324
Auxiliary box P. 321

Moon roof switches P. 72

Front personal lights P. 315
Interior light P. 313

SRS curtain shield airbags P. 87

Rear personal lights P. 315

Garage door opener switches ∗ P. 338

Anti-glare inside rear view mirror P. 66

Compass ∗ P. 343

∗: If equipped

Pictorial index

Interior

Vehicles without moon roof

Vanity mirrors P. 325
Sun visors P. 324
Auxiliary box P. 321

Front personal lights P. 315

SRS curtain shield airbags P. 87

Interior light P. 314

Garage door opener switches ∗ P. 338

Anti-glare inside rear view mirror P. 66

Compass ∗ P. 343

10

B

Inside lock button P. 43

Door lock switch P. 42

Window lock switch P. 70

Power window switches P. 70

∗: If equipped

11

Pictorial index

Interior

Automatic transmission

Automatic transmission shift lever P. 138

Shift lock override button P. 467

Cup holders P. 319

Auxiliary box P. 321

Power outlet P. 328

Manual transmission

Manual transmission shift lever P. 142

Cup holders P. 319

Parking brake lever P. 145

12

Pictorial index

Instrument panel

Headlight switch Turn signal lever Fog light switch ∗

P. 159
P. 144
P. 163

Gauges and meters Multi-information display ∗

P. 147
P. 155

VSC OFF switch P. 171

Outside rear view mirror switches

P. 68

P. 326

Clock Security indicator

P. 80, 82

Emergency flasher switch P. 424

Audio system P. 211
Navigation system *1

Fuel filler door opener

P. 76

Trunk opener P. 47

Hood lock release lever P. 362

Auxiliary box P. 321

Horn P. 146

Tire pressure warning reset switch ∗ P. 384

Windshield wiper and washer switch P. 164

Tilt and telescopic steering control lever P. 65
Parking brake pedal ∗ P. 145
∗: If equipped *1: Refer to “Navigation System Owner’s Manual”.

13

Pictorial index

Instrument panel

Automatic air conditioning system

Air conditioning system P. 196

Rear window and outside rear view mirror defogger switch P. 209

Manual air conditioning system

Air conditioning system P. 204

Rear window defogger switch Outside rear view mirror defogger switch ∗

P. 209

P. 209

14

B

Type A

“DISP” switch ∗ P. 156

Audio remote control *1
switches

P. 260

Air conditioning remote control switches ∗ P. 201

Telephone switches ∗

P. 284

*1

Engine (ignition) switch (vehicles without smart key system) P. 135
Talk switch ∗

P. 284

*1

Cruise control switch P. 166

Engine (ignition) switch (vehicles with smart key system) P. 131

∗: If equipped *1: Refer to “Navigation System Owner’s Manual”.

15

Pictorial index

Instrument panel

Type B

Engine (ignition) switch (vehicles without smart key system) P. 135

Audio remote control *1
switches

P. 260

Telephone switches ∗ P. 284

*1

Cruise control switch P. 166

Engine (ignition) switch (vehicles with smart key system) P. 131
Talk switch ∗

P. 284

*1

16

C

Power outlet P. 328

USB/AUX adapter ∗ AUX adapter ∗ P. 258

P. 240, 246

Cable pass-through P. 323

Seat heater switches ∗ P. 330

∗: If equipped *1: Refer to “Navigation System Owner’s Manual”.

17

1-1. Key information Keys

The following keys are provided with the vehicle.

Vehicles with smart key system

Electronic keys • Operating the smart key

system (→P. 27)

• Operating

the wireless

remote control function (→P. 38)

Mechanical keys Key number plate

Vehicles without smart key system (type A)

Master keys Operating the wireless remote control function (→P. 38) Valet key Key number plate

Vehicles without smart key system (type B)

Master keys Valet key Key number plate

24

1

1-1. Key information

Using the mechanical key (vehicles with smart key system)

Take out the mechanical key.

After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key. (→P. 469)

■When required to leave a key to the vehicle with a parking attendant

Lock the glove box and the trunk storage extension as circumstances demand. Set the luggage security system. (→P. 48, 317, 334) Vehicles with smart key system: Remove the mechanical key for your own use and provide the attendant with the electronic key only. Vehicles without smart key system: Carry the master key for your own use and leave the valet key only with the attendant.

■Key number plate

Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 468)

■When riding in an aircraft

When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying the key in your bag etc, ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.

25

1-1. Key information

NOTICE

■To prevent key damage

●Do not subject the keys to strong shocks, expose them to high tempera-

tures by placing them in direct sunlight, or get them wet.

●Do not expose the keys to electromagnetic materials or attach any mate-

rial that blocks electromagnetic waves to the key surface.

●Do not disassemble the key.

26

1-2. Opening, closing and locking the doors and trunk Smart key system∗

The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.)

Locks and unlocks the doors (→P. 28) Unlocks the trunk (→P. 28) Starts the engine (→P. 131)

∗: If equipped 27

1-2. Opening, closing and locking the doors and trunk

Unlocking and locking the doors (front door handles only)

Grip the handle to unlock the door.

Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after is locked.

the door

Press the lock button to lock the door.

Unlocking the trunk

Press the button to unlock the trunk.

28

1-2. Opening, closing and locking the doors and trunk

Antenna location and effective range

■ Antenna location

Antennas outside the cabin Antenna outside the trunk Antenna inside the trunk Antennas inside the cabin

29

1-2. Opening, closing and locking the doors and trunk

■ Effective range (areas within which the electronic key is

detected)

(Only

When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles. the doors detecting the key can be operated.) When starting the engine or changing “ENGINE START STOP” switch modes The system can be operated when the electronic key is inside the vehicle. When unlocking the trunk The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the trunk release button.

■Operation signals

A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice)

■Conditions affecting operation

The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly. (Ways of coping: →P. 469) ●When the electronic key battery is depleted

30

1-2. Opening, closing and locking the doors and trunk

●Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electri- cal noise

●When carrying a portable radio, cellular phone, cordless phone or other

wireless communication devices

●When the electronic key has come into contact with, or is covered by, a

metallic object

●When multiple electronic keys are in the vicinity ●When carrying or using the electronic key together with the following

devices that emit radio waves • Another vehicle’s electronic key • A wireless key that emits radio waves • Personal computer

●If window tint with a metallic content or metallic objects are attached to

the rear window

■Switching the door unlock function

STEP 2

It is possible to set which doors the entry function unlocks. STEP 1

the

Turn the “ENGINE START STOP” switch OFF. When the key surface hold pressing

indicator on

on the key.

, or

is off, press and for approximately 5 seconds while

The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)

Multi-information

display

Unlocking doors

Beep

Hold the driver's door han- dle to unlock only the driver's door. Hold the front passenger's door handle to unlock all doors Hold either front door han- dle to unlock all doors

Exterior: Beeps three times Interior: Pings once

Exterior: Beeps twice Interior: Pings once

31

1-2. Opening, closing and locking the doors and trunk

STEP 3

Unlock the doors using the electronic key and open one of the doors. If a door is not opened within 60 seconds after doors will be locked again and the alarm will automatically be set. In case that the alarm is triggered, immediately stop the alarm. (→P. 82)

is pressed, the

■Battery-saving function

In the following circumstances, the entry function is disabled in order to pre- vent the vehicle and electronic key batteries from discharging. ●When the entry function has not been used for 2 weeks or more ●When the electronic key has been left within approximately 6 ft. (2 m) of

the vehicle for 10 minutes or more

The system will resume operation when... ●The vehicle is locked using the door handle lock switch. ●The vehicle is locked/unlocked using the wireless remote control func-

tion. (→P. 38)

●The vehicle is locked/unlocked using the mechanical key. (→P. 469)

■Electronic key battery depletion

●The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted. Replace the battery when necessary. (→P. 401)

●To avoid serious deterioration, do not leave the electronic key within 3 ft. (1 m) of the following electrical appliances that produce a magnetic field. • TVs • Personal computers • Recharging cellular phones or cordless phones • Table lamps

■To operate the system properly

Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door lock prevention may not func- tion.)

32

1

1-2. Opening, closing and locking the doors and trunk

■Note for the smart key system

●Even when the electronic key is within the effective range (detection

areas), the system may not operate properly in the following cases. • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.

• The electronic key is near the ground or in a high place, or too close to

the rear bumper center when the trunk is unlocked.

• The electronic key is on the instrument panel, package tray, floor, or in the auxiliary box of the driver's side instrument panel or glove box when the engine is started or “ENGINE START STOP” switch modes are changed.

●As long as the electronic key is within the effective range, the doors may

be locked or unlocked by anyone.

●Even if the electronic key is not inside the vehicle, it may be possible to

start the engine if the electronic key is near the window.

●The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.)

●Gripping the door handle when wearing a glove may not unlock the door. ●If the wireless remote control is used to lock the doors when the elec- tronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.)

●A sudden approach to the effective range or door handle may prevent the doors from being unlocked. In this case, return the door handle to the original position and check that the doors unlock before pulling the door handle again.

■When the vehicle is not driven for extended periods

To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2
m) of the vehicle. ■Security feature

If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.

33

1-2. Opening, closing and locking the doors and trunk

■Alarms and warning indicators

A combination of exterior and interior alarms as well as warning messages shown on the multi-information display are used to reduce the chance of vehicle theft and accidents resulting from erroneous operation. ●When any warning lights come on:

Take appropriate measures according to which warning light comes on. (→P. 432)

●When a warning message is shown on the multi-information display

(vehicles with Optitron type meters): Take appropriate measures according to the warning message on the multi-information display. (→P. 444)

The following table describes circumstances and correction procedures when only alarms are sounded.

Alarm

Situation

Tried to lock the doors using the entry function while the electronic key is still inside the passenger compartment Closed the trunk while the electronic key is still inside the trunk and all doors are locked Tried to lock the vehicle using the entry function while a door is open

Exterior alarm sounds once for 2 seconds

Exterior alarm sounds once for 10 seconds

Correction procedure Retrieve the elec- tronic key from the passenger compart- ment and lock the doors again. Retrieve the elec- tronic key from the trunk and close the trunk lid. Close all of the doors and lock the doors again.

34

1-2. Opening, closing and locking the doors and trunk

Alarm

Situation

Correction procedure

Exterior alarm sounds once for 60 seconds

Interior alarm sounds continu- ously

Interior alarm beeps repeatedly

Tried to exit the vehicle with the electronic key and lock the doors without first turning the “ENGINE START STOP” switch OFF Tried to open the door and exit the vehicle without shifting the shift lever to P when the “ENGINE START STOP” switch is in ACCESSORY mode or IGNITION ON mode Turned the “ENGINE START STOP” switch to ACCESSORY mode while the driver's door is open (Opened the driver's door when the “ENGINE START STOP” switch is in ACCESSORY mode.) Turned the “ENGINE START STOP” switch OFF while the driver's door is open

Turn the “ENGINE START STOP” switch OFF and lock the doors again.

Shift the shift lever to P.

Turn the “ENGINE START STOP” switch OFF and close the driver's door.

Close the driver's door.

■If the smart key system does not operate properly

●Locking and unlocking the doors and trunk: Use the mechanical key.

(→P. 469)

●Starting the engine: →P. 470

■When the electronic key battery is fully depleted

→P. 401

■Customization that can be configured at Toyota dealer

It is possible to deactivate the smart key system, etc. (Customizable features →P. 510)

35

1-2. Opening, closing and locking the doors and trunk

■Certification for the smart key system

For vehicles sold in the U.S.A.

FCC ID: NI4TMLF-3
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

For vehicles sold in Canada

NOTE: Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

36

1

1-2. Opening, closing and locking the doors and trunk

CAUTION

■Caution regarding interference with electronic devices

●People with implanted pacemakers or cardiac defibrillators should keep

away from the smart key system antennas. (→P. 29) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.

●User of any electrical medical device other than implanted pacemakers and implanted cardiac defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

Ask your Toyota dealer for details for disabling the entry function.

37

1-2. Opening, closing and locking the doors and trunk Wireless remote control∗

The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle.

Vehicles with smart key system

Vehicles without smart key system

Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Unlocks the trunk (press and hold) Sounds an alarm (press and hold)

Locks all doors Sounds an alarm (press and hold) Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Unlocks the trunk (press and hold)

38

∗: If equipped

1-2. Opening, closing and locking the doors and trunk

■Operation signals

Doors: A buzzer sounds and the emergency flashers flash to indicate that

the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice)

Trunk: A buzzer sounds to indicate that the trunk has been unlocked.

■Door lock buzzer

If a door is not fully closed, a buzzer sounds continuously for 10 seconds if an attempt to lock the door is made. Fully close the door to stop the buzzer, and lock the vehicle once more.

■Panic mode

Vehicles with smart key system

When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the electronic key.

Vehicles without smart key system

is pressed for longer When than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the wireless remote control.

39

1-2. Opening, closing and locking the doors and trunk

■Key battery depletion

Vehicles with smart key system

→P. 32

Vehicles without smart key system

The standard battery life is 1 to 2 years. (The battery becomes depleted even if the key is not used.) If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 401)

■Security feature

If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.

■When the electronic key battery is fully depleted (vehicles with smart

key system) →P. 401

■Conditions affecting operation Vehicles with smart key system

→P. 30

Vehicles without smart key system

The wireless remote control function may not operate normally in the follow- ing situations. ●Near a TV tower, radio station, electric power plant, airport or other facil-

ity that generates strong radio waves

●When carrying a portable radio, cellular phone or other wireless commu-

nication devices

●When multiple wireless keys are in the vicinity ●When the wireless key has come into contact with, or is covered by, a

metallic object

●When a wireless key (that emits radio waves) is being used nearby ●When the wireless key has been left near an electrical appliance such as

a personal computer

40

1-2. Opening, closing and locking the doors and trunk

■Customization that can be configured at Toyota dealer

Settings (e.g. trunk unlocking function) can be changed. (Customizable features →P. 510)

■Certification for wireless remote control

For vehicles sold in the U.S.A.

NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

For vehicles sold in Canada

NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

41

1-2. Opening, closing and locking the doors and trunk Doors

The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system)

→P. 27

■ Wireless remote control (if equipped)

→P. 38

■ Key

Vehicles with smart key system The doors can also be locked and unlocked with the mechanical key. (→P. 469) Vehicles without smart key system

Locks all doors Unlocks all doors Turning the key unlocks the driver's door. Turning the key again unlocks the other doors.

■ Door lock switch

Locks all doors Unlocks all doors

42

1

1-2. Opening, closing and locking the doors and trunk

■ Inside lock button

Unlocks the door Locks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.

Locking the front doors from the outside without a key

Vehicles with smart key system The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle. Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked. Vehicles without smart key system The door cannot be locked if either of the front doors is open and the key is in the engine switch.

Rear door child-protector lock

The door cannot be opened from inside the vehicle when the locks are set.

These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.

43

1-2. Opening, closing and locking the doors and trunk

Automatic door locking and unlocking systems

The following functions can be set or cancelled:

Function

Shift position linked door locking function* Shift position linked door unlocking func- tion* Speed linked door lock- ing function

Operation

Shifting the shift lever out of P locks all doors.

Shifting the shift lever to P unlocks all doors.

All doors are locked when the vehicle speed is approximately 12 mph (20 km/h) or higher.

Driver's door linked door unlocking function

Vehicles with smart key system

All doors are unlocked when the driver's door is opened within 10 seconds after turning the “ENGINE START STOP” switch OFF.

Vehicles without smart key system

All doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch from the “ON” position to the “ACC” or “LOCK” position.

*: Vehicles with an automatic transmission only

44

1

1-2. Opening, closing and locking the doors and trunk

■ Setting and canceling the functions

To switch between setting and canceling, follow the procedure below:

STEP 1

STEP 2

Vehicles with smart key system: Close all the doors and switch the “ENGINE START STOP” switch to IGNITION ON mode. (Perform the step 2 within 20
seconds.) Vehicles without smart key system: Close all the doors and switch the engine switch to the “ON” position. (Perform step 2 within 10 seconds.)

Shift the shift lever to P or N, and press and hold the driver's door lock for approximately 5 seconds and then release.

switch

or

to

corresponding

The shift lever and switch posi- tions the desired function to be set are shown as follows. Use the same procedure to can- cel the function.

Function

Shift lever position

Driver’s door lock switch position

Shift position linked door lock- ing function* Shift position linked door unlocking function* Speed linked door locking func- tion Driver's door linked door unlock- ing function *: Vehicles with an automatic transmission only

45

1-2. Opening, closing and locking the doors and trunk

When the setting or canceling operation is complete, all doors are locked and then unlocked.

■Customization that can be configured at Toyota dealer

Settings (e.g. unlocking function using a key) can be changed. (Customizable features →P. 510)

CAUTION

■To prevent an accident

Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●Always use a seat belt. ●Always lock the doors. ●Ensure that all doors are properly closed. ●Do not pull the inside handle of the doors while driving.

The doors may be opened and the passengers are thrown out of the vehi- cle and it may result in serious injury or death. Be especially careful for the front doors, the doors may be opened even if the inside lock buttons are in locked position.

●Set the rear door child protector locks when children are seated in the rear

seat.

46

1-2. Opening, closing and locking the doors and trunk Trunk

The trunk can be opened using the key, trunk opener, entry function or wireless remote control. ■ Opening the trunk from outside the vehicle Entry function (vehicles with smart key system) →P. 27
Wireless remote control (if equipped) →P. 38
Key (vehicles with smart key system) The trunk can be opened using the mechanical key. (→P. 469) Key (vehicles without smart key system)

Turn the master key clockwise to release the trunk lid.

■ Opening the trunk from inside the vehicle

Pull the lever to release the trunk lid.

47

1-2. Opening, closing and locking the doors and trunk

Luggage security system

To protect luggage stored in the trunk against theft, do the following procedure.

Turn the master key (vehicles without smart key system) or mechanical key (vehicles with smart key system) counterclock- wise to lock the trunk opener fea- ture.

The trunk lid cannot be opened even with the wireless remote control or the entry function.

The trunk lid can be opened by pulling up the glow-in-the-dark lever located on the inside of trunk lid. The lever will continue to glow for some time after the trunk lid is closed.

■Internal trunk release lever

■Trunk light

The trunk light turns on when the trunk is opened.

■Which key to the vehicle is to leave with a parking attendant after the

luggage security system is set. →P. 25

48

1

1-2. Opening, closing and locking the doors and trunk

CAUTION

■Caution while driving

●Keep the trunk lid closed while driving.

If the trunk lid is left open, it may hit near-by objects while driving or lug- gage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard. Make sure to close the trunk lid before driving.

●Before driving the vehicle, make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving, caus- ing an accident.

●Never let anyone sit in the trunk. In the event of sudden braking or a colli-

sion, they are susceptible to death or serious injury.

■When children are in the vehicle Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not allow children to enter the trunk.

If a child is accidentally locked in the trunk, they could overheat or suffo- cate.

●Do not allow a child to open or close the trunk lid.

Doing so may cause the trunk lid to operate unexpectedly, or cause the child’s hands, head, or neck to be caught by the closing trunk lid.

49

1-2. Opening, closing and locking the doors and trunk

CAUTION

■Using the trunk

Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury. ●Remove any heavy loads, such as snow and ice, from the trunk lid before opening it. Failure to do so may cause the trunk lid to fall closed again after it is opened.

●When opening or closing the trunk lid, thoroughly check to make sure the

surrounding area is safe.

●If anyone is in the vicinity, make sure they are safe and let them know that

the trunk is about to open or close.

●Use caution when opening or closing the trunk lid in windy weather as it

may move abruptly in strong wind.

●The trunk lid may fall if it is not opened fully. It is more difficult to open or close the trunk lid on an incline than on a level surface, so beware of the trunk lid unexpectedly opening or closing by itself. Make sure that the trunk lid is fully open and secure before using the trunk.

●When closing the trunk lid, take extra care to prevent your fingers etc. from being caught.

●When closing the trunk lid, make sure

to press it lightly on its outer surface.

●Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to fall closed again after it is opened.

50

1-3. Adjustable components (seats, mirrors, steering wheel) Front seats

Power seat

Seat position switch Seatback angle switch Seat cushion (front) angle switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumbar support switch (driver’s side only)

51

1-3. Adjustable components (seats, mirrors, steering wheel)

Manual seat

Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only)

CAUTION

■Seat adjustment

●Do not recline the seat more than necessary when the vehicle is in motion

to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.

●Manual seat only: After adjusting the seat, make sure that the seat is

locked in position.

52

1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats

■ Adjusting the rear seat (if equipped)

Pull up the seatback angle adjustment lever until the lock is completely released.

53

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Folding down rear seatbacks (if equipped)

Pull the seatback lever in the trunk for the seatback you wish to fold down.

CAUTION

■After returning the seatback to the upright position

Observe the following precautions. Failure to do so may result in death or serious injury. ●Make sure the seatback is securely locked by pressing forward and rear-

ward on the top of the seatback.

●Check that the seat belts are not twisted or caught in the seatback.

NOTICE

■When right seatback is folded down

Make sure the luggage loaded in the enlarged trunk will not damage the webbing of the rear center seat belt.

54

1

1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints

Head restraints are provided for all seats.

Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button.

Pull the head restraint up while pressing the lock release button.

Lock release button

■Removing the head restraints

■Installing the head restraints

Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.

55

1-3. Adjustable components (seats, mirrors, steering wheel)

■Adjusting the height of the head restraints

Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

■Adjusting the rear center seat head restraint

Always raise the head restraint one level from the stowed position when using.

CAUTION

■Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ●Use the head restraints designed for each respective seat. ●Adjust the head restraints to the correct position at all times. ●After adjusting the head restraints, push down on them and make sure

they are locked in position.

●Do not drive with the head restraints removed.

56

1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts

Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts

● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoul- der.

● Position the lap belt as low

as possible over the hips.

● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt.

■ Fastening and releasing the seat belt

Fastening the belt Push the tab into the buckle until a clicking sound is heard. Releasing the belt Press the release button.

Release button

57

1-3. Adjustable components (seats, mirrors, steering wheel)

■ Adjusting the height of the belt (front seats)

Down Up Move the height adjuster up and down as needed until you hear a click.

Seat belt comfort guide (outside rear seat)

If the shoulder belt fits close to a person's neck, use the seat belt comfort guide.

Pull out the comfort guide from the pocket.

Slide the belt past the slot of the guide.

The elastic cord must be behind the seat belt.

STEP 1

STEP 2

58

1-3. Adjustable components (seats, mirrors, steering wheel)

STEP 3

Buckle, position and release the seat belt.

Seat belt pretensioners (front seats)

The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.

The pretensioner may not acti- vate in the event of a minor frontal impact, a side impact or a rear impact.

59

1-3. Adjustable components (seats, mirrors, steering wheel)

■Emergency locking retractor (ELR)

The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.

■Automatic locking retractor (ALR)

When a passenger's shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (→P. 108)

■Pregnant women

Obtain medical advice and wear the seat belt in the proper way. (→P. 57) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. Extend the shoulder belt com- pletely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only a pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a collision.

■People suffering illness

Obtain medical advice and wear the seat belt in the proper way.

60

1

1-3. Adjustable components (seats, mirrors, steering wheel)

■Child seat belt usage

The seat belts of your vehicle were principally designed for persons of adult size. ●Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle's seat belt. (→P. 104) ●When the child becomes large enough to properly wear the vehicle's seat

belt, follow the instructions on P. 57 regarding seat belt usage. ■Replacing the belt after the pretensioner has been activated

If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent colli- sions.

■Seat belt extender

If your seat belts cannot be fastened securely because long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.

they are not

Use the seat belt after passing it through the guide if the seat belt comes free from the guide.

■Rear seat belt

61

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failing to do so may cause death or severe injury. ■Wearing a seat belt

●Ensure that all passengers wear a seat belt. ●Always wear a seat belt properly. ●Each seat belt should be used by one person only. Do not use a seat belt

for more than one person at once, including children.

●Toyota recommends that children be seated in the rear seat and always

use a seat belt and/or an appropriate child restraint system.

●Do not recline the seat any more than necessary to achieve a proper seat- ing position. The seat belt is most effective when the occupants are sitting up straight and well back in the seats.

●Do not wear the shoulder belt under your arm. ●Always wear your seat belt low and snug across your hips.

■Adjustable shoulder anchor

Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause death or serious injuries in the event of a sudden stop, sudden swerve or collision. (→P. 58)

■Seat belt pretensioners

●Do not place anything, such as a cushion, on the front passenger's seat. Doing so will disperse the passenger's weight, which prevents the sensor from detecting the passenger's weight properly. As a result, the seat belt pretensioner for the front passenger's seat may not activate in the event of a collision.

●If the pretensioner has activated, the seat belt becomes locked: it cannot be further extended, nor will it return to the stowed position. The seat belt cannot be used again and must be replaced at your Toyota dealer.

62

1

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

■Child restraint lock function belt precaution

Do not allow children to play with the child restraint lock function belt. If the belt becomes twisted around a child’s neck, it will not be possible to pull the belt out leading to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.

■Seat belt damage and wear

●Do not damage the seat belts by allowing the belt, plate, or buckle to be

jammed in the door.

●Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belts cannot protect an occupant from death or serious injury.

●Ensure that the belt and tab are locked and the belt is not twisted.

If the seat belt does not function correctly, immediately contact your Toyota dealer.

●Replace the seat assembly, including the belts, if your vehicle has been

involved in a serious accident, even if there is no obvious damage.

●Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury.

●Always make sure the shoulder belt passes through the guide when using the seat belt. Failure to properly position the belt may reduce the amount of protection in an accident and could lead to serious injures in a collision or sudden stop.

●Always make sure that the seat belt is not twisted, does not get caught in

the guide or the seatback and is arranged in the proper position.

63

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

■Using a seat belt comfort guide

●Make sure the belt is not twisted and that it lies flat. The elastic cord must

be behind the belt and the guide must be on the front.

●To reduce the chance of injury in case of a sudden stop, sudden swerve or accident while driving, remove and store the comfort guide in its pocket when it is not in use.

●Always make sure the shoulder belt is positioned across the center of the shoulder. The belt should be kept away from the neck, and should not fall off the shoulder. Failure to observe these precautions could reduce the effectiveness of the seat belt in an accident, causing death or serious injury.

■Using a seat belt extender

●Do not wear the seat belt extender if you can fasten the seat belt without

the extender.

●Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.

●The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended.

NOTICE

■When using a seat belt extender

When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.

64

1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel

The steering wheel can be adjusted to a comfortable position.

STEP 1

STEP 2

Hold the steering wheel and press the lever down.

Adjust to the ideal position by moving the steering wheel horizontally and vertically.

After adjustment, pull the lever up the steering wheel.

to secure

CAUTION

■Caution while driving

Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury.

■After adjusting the steering wheel

Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.

65

1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror

Glare from the headlights of vehicles behind can be reduced by using the following functions.

Manual anti-glare inside rear view mirror

Normal position Anti-glare position

Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.

Turns automatic mode on/off

START

The indicator comes on when automatic mode is turned on. Vehicles with smart key sys- tem: The mirror will revert to the automatic mode each time the “ENGINE STOP” switch is turned to IGNITION ON mode. Vehicles without smart key system: The mirror will revert to the automatic mode each time the engine switch is turned to the “ON” position.

66

1-3. Adjustable components (seats, mirrors, steering wheel)

■To prevent sensor error (vehicles with auto anti-glare inside rear view

mirror)

To ensure that the sensors operate prop- erly, do not touch or cover them.

CAUTION

■Caution while driving

Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.

67

1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors

Mirror angle can be adjusted using the switch.

STEP 1

Select a mirror to adjust.

Left Right

STEP 2

Adjust the mirror.

Up Right Down Left

■Mirror angle can be adjusted when

Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position.

■When the mirrors are fogged up (vehicles with mirror defoggers)

Turn on the mirror defoggers to defog the mirrors. (→P. 209)

68

1